I have a stock rom evo 4g LTE, rooted, with Android 4.0.3 on it.
I forget the root app I used, some one click thingy, I guess my bootloader is unlocked
because I get a boot menu every time I reboot, on that screen that says **TAMPERED**.
Anyway, I ignored the notification icon in my taskbar for OTA updates, for a very long time.
Since the day I bought it over a year ago.
Finally I decided "eh, screw it, why not." ...I'm sure I'll regret that.
I told it to do the OTA update, and it downloaded (I think??) and rebooted.
The icon went away. Seemed to be a done deal.
But once per day since then, my phone rings, and I see a prompt saying
there's an OTA update, and would I like to install it now?
I think it's the same OTA update being prompted repeatdly,
because the filesize is always the same (~42 megs).
What should I do? I can choose install, reboot, and be fine for the rest of the day,
or choose cancel, reboot, and be fine for the rest of the day.
Doesn't seem to matter. But would be nice to fix it for good.
Well, considering that you are about 4-5 OTAs behind the rest of the community, I would say that the notification is probably correct. HOWEVER, of you are not using the stock recovery, then the OTA did not flash. Yes, the phone rebooted, but that's because it is installed entirely through recovery, and the phone has to reboot to get into recovery mode in the first place.
Now, for the more important question at hand....why exactly are you still using ICS? Furthermore, if you are still using ICS, then why are you rooted? As far as I'm concerned, the OTAs are actually necessary updates for the phone. I'm sure that you will love Jelly Bean if you have never used it before.
And please, for the sake of us all who are cringing at the sight of the first sentence....PLEASE UPDATE your phone! If you have a good reason not to, please share.
Hi, thanks for the reply... Maybe they were all different updates after all.
I haven't been prompted to update again since my post.
Maybe I grabbed the 3 or 4 OTA updates that I needed to catch up on.
I do think I'd like Jelly Bean too, seeing some of the features is what prompted me to finally catch up.
Can you explain this part to me? I'm not familiar with this stuff.
HOWEVER, of you are not using the stock recovery, then the OTA did not flash.
Yes, the phone rebooted, but that's because it is installed entirely through recovery,
and the phone has to reboot to get into recovery mode in the first place.
Click to expand...
Click to collapse
So, there's more than one recovery mode, the stock one, and ...whatever else you can install?
When I see the white screen that says **TAMPERED** (looks basically like this screen)...
should I have chosen Recovery instead of the usual reboot option?
If I no longer see the notification, does that mean the updates worked? My Android version still shows 4.0.3.
why exactly are you still using ICS? Furthermore, if you are still using ICS, then why are you rooted?
Click to expand...
Click to collapse
Well, I had no compelling reason to upgrade. I still don't really, the phone does what I want,
I just saw some of the features in the next version and thought "huh, that sounds pretty cool".
I'm rooted for all the usual reasons... I want to be able to browse, copy, move, rename files (including system files)
without incident... use nandroid for backups... wifi tether (still can't get that to work actually)... install unapproved apps...
tweak the OS, and so on.
Ok, my friend...let me educate you. Instead of giving you the simplest, fastest solution, I will actually try to answer all of your questions, since you did ask.
I do think I'd like Jelly Bean too, seeing some of the features is what prompted me to finally catch up.
Can you explain this part to me? I'm not familiar with this stuff.
Click to expand...
Click to collapse
To give a very superficial explanation of Jelly Bean, it is everything that ICS does, and more. It just does it smoother. It also brings Google Now, which was – and still is – the selling point of Jelly Bean. The Sense launcher got a few changes, too, but you will have to explore those changes on your own (mainly because I don’t remember them off hand, and this post is beginning to become lengthy).
Maybe I grabbed the 3 or 4 OTA updates that I needed to catch up on.
If I no longer see the notification, does that mean the updates worked? My Android version still shows 4.0.3.
Click to expand...
Click to collapse
If the first update didn’t update properly, then the phone is simply downloading and trying to install the same update over and over. When you boot back into Android after a successful update, you will be greeted by a welcome message congratulating you for installing the new version.
If you are rooted, odds are, you are using a custom recovery, such as TWRP or CWM. OTAs are only installed through the stock recovery & a locked bootloader. The stock recovery doesn’t make nandroids, or do anything of the sort. To install the stock recovery, go here:
http://downloadandroidrom.com/file/HTCEvo4GLTE/rooting/Evo4GLTERoot2.zip
Click to expand...
Click to collapse
The stock recovery is located somewhere within the zip file.
So, there's more than one recovery mode, the stock one, and ...whatever else you can install?
When I see the white screen that says **TAMPERED** (looks basically like this screen)...
should I have chosen Recovery instead of the usual reboot option?
Click to expand...
Click to collapse
You can flash install the stock recovery by using fastboot commands from the bootloader (which is the screen that shows the TAMPERED status on the top), or you can use Flash Image GUI. It is a paid app on the Play Store, or you can get it from XDA (the dev let XDA users download it for free…Google it).
Lastly, there are a few things that I suggest that you do. First, obtain S-Off (Google, Google, Google...very simple), so you can install the new firmwares directly, instead of using OTAs. Otherwise, if you accept the OTA, you will lose root, and you will have to root your phone again and again. Installing the firmware, then the new rom is the same as accepting the OTA, then rooting.
Another alternative is to get S-Off, then accept the OTA (after installing the stock recovery). Your bootloader does not need to be locked, and there are recovery zips floating around here that can be installed through the bootloader (therefore, you will not be stuck rooting the phone the hard way, just boot into recovery and flash SuperSU). I highly suggest achieving S-Off.
If you want to jump straight to the latest version (Android 4.3, Sense 5.0) by installing the RUU located somewhere in this forum. I actually suggest that you try Sense 4 with Jelly Bean first, but that is completely up to you. Keep in mind that using the RUU will wipe your internal memory, so back up what needs to be backed up. This doesn’t require you to be rooted, and the state of the bootloader does not matter. It will lock the bootloader, load the stock recovery, and you will lose root. You won’t be able to downgrade without S-Off.
Other Notes:
When using the 4.3 RUU, make sure that Android USB Debugging is enabled.
Bookmarking for later but I wanted to say thanks for the thorough reply!
I can confirm the update never worked, because I never got the confirmation message
and I got prompted again a few hours after I posted.
Are you willing to answer just a few more things?
Based on what I've read, it sounds like this is what I ought to do:
- Back up anything I need to. Just to confirm, updating firmware and flashing a new rom wipes out everything in the phone's internal memory, but not external SDcard? Or both?
Are apps considered "on the cloud" and I can reinstall by just redownloading, without paying again?
Except sideloaded apps? Or will I need to find all those APK files and save them somewhere else?
Is it safe to say they're all in \data\app and \system\app? Or would system\app be unwanted since it's what came with the old phone OS?
- Get my phone into S-OFF status.
- Update firmware (this is a separate process from updating the rom? Where do I get this firmware? Google google google?)
- Install a new ROM (stock or otherwise) which will have these updates built in, so I won't need to regain root.
- Not sure what my bootloader is, maybe TWRP, does it matter? Do the above steps affect it? Should I change it to stock anyway?
- You suggested trying Sense 4 rather than Sense 5 first... any special reason?
Are you willing to answer just a few more things?
Click to expand...
Click to collapse
As always, I'm open for questions. Not to sound egotistic, but I enjoy sharing my opinion.
Based on what I've read, it sounds like this is what I ought to do:
- Back up anything I need to. Just to confirm, updating firmware and flashing a new rom wipes out everything in the phone's internal memory, but not external SDcard? Or both?
Updating to the 4.3 firmware wipes your internal memory, not your sd card (although, that may be a very unfortunate circumstance, so it should be backed up as well). The other firmware updates do not affect your memory.
Are apps considered "on the cloud" and I can reinstall by just redownloading, without paying again?
Technically, yes they are "on the cloud." The fact that you paid is saved somewhere within your main Google account that you downloaded the app with. It is possible to pay for apps with your secondary gmail account, which can be switched within the Play Store app.
Except sideloaded apps? Or will I need to find all those APK files and save them somewhere else?
Use Titanium Backup if you can't find the apks. I do save my apks that I download, and I also upload them to Google Drive, since I have multiple Android devices, and I also have a faulty micro sd card that I am yet to replace. I can lose my data at any given moment, but everything is backed up, so I'm not worried.
Is it safe to say they're all in \data\app and \system\app? Or would system\app be unwanted since it's what came with the old phone OS?
Everything within the /system folder is wiped when you flash new roms. That data is NOT backed up while flashing between roms. Also, since it is from an older Android version, it's best to leave them alone. You may back up the data if you like, but I would refrain from restoring the apks along with the data.
The /data directory may be wiped, depending on the dev who built the rom zip. If they added the superwipe script, then /data will be wiped as well. Most devs do not include this, since many people "dirty flash," which is flashing new roms or updates of the current rom without wiping /data first.
- Get my phone into S-OFF status.
You will save yourself a LOT of headaches in the future. It was my S-Off status that allowed me to reflash my firmware when I lost the function of my data/voice antennas while carelessly flashing a port of a phone on a different carrier. Also, if you feel curious to try AOSP roms, then you do not need to do any extra steps to flash them.
- Update firmware (this is a separate process from updating the rom? Where do I get this firmware? Google google google?)
Yes, the firmware handles manages how the hardware of the phone operates. Updating the rom changes how the software looks and behaves. The kernel is sort of a bridge between the firmware and the software, since it manages the firmware (like battery life, processor speed, antennas, etc.), but the kernel is dependent on the software version. The firmware is not dependent on the software version, just as the software version is not dependent on the firmware version.
The only exception of the firmware/software independence is the 4.3 update, which requires a complete update of the firmware, and the older software cannot run on the new firmware without being modded by a dev.
- Install a new ROM (stock or otherwise) which will have these updates built in, so I won't need to regain root.
- Not sure what my bootloader is, maybe TWRP, does it matter? Do the above steps affect it? Should I change it to stock anyway?
Your bootloader is the white screen that shows the TAMPERED status on the top, and little Androids on skateboards on the bottom. With the exception of the firmware information in the top left corner, this screen does not change...ever.
TWRP is your recovery image, which is accessible through the RECOVERY option in your bootloader, or you can boot directly into it through different apps in Android - Titanium Backup is one of them (yes, that's one of the options, even for the free version).
The only reason to return your recovery to stock is to accept OTAs, and also to bring your phone back to the complete factory settings, just as the day when it was first purchased (for the sake of selling the phone, or returning back to Sprint for service}. Otherwise, don't bother with it. You may want to update your version of TWRP, though. If you update to 4.3, you will have to update it. I'm not going to take the time to get into that right now. I've given you enough homework.
- You suggested trying Sense 4 rather than Sense 5 first... any special reason?
I am a very patient person. To me, exploring Android takes time. I enjoy reading before I test, and testing before I settle (which I'm yet to "settle"). All of that being said, I suggested Sense 4 before Sense 5 because I wanted you to experience the both of them. They are truly two different versions of Sense, which one might not realize, as their version numbers are differentiated by one integer (in other words, 4 to 5). Sense 3 was a small step above Sense 2, and Sense 4 was a bigger step from Sense 3. Sense 5 is a complete overhaul of the Sense UI, save the flip clock.
I just feel that skipping from 4.0 to 4.3 is missing out on a great experience, but that is mainly if you actually want to try out different roms. Until the Sense 5 RUU, I still visiting ICS on occassion, but I usually didn't last more than 3 hours before I jumped back to JB.
Click to expand...
Click to collapse
Whew...you're making me work. But I like it. Anymore questions? Feel free to ask.
OK I've been working on this all afternoon and I'm at an impasse.
You've been a huge help so far and I hope you can guide me through this part.
I want to S-OFF and am following a tutorial: http://www.thefortressofnerditude.com/s-off-your-sprint-htc-evo-4g-lte/
Step 3 says root and install recovery. So I decide I need TWRP.
Already have nandroid and titanium backups both completed.
And I copied the whole SDcard to my computer after.
Annoyingly, TWRP's install page suggests that I need to be in S-OFF.
TWRP says I need S-OFF. S-OFF guide seems to suggest I need TWRP working.
I installed "TWRP Manager". Realize that might not be the same thing as TWRP.
Googled and found it on the TeamWin page.
The page asks first to input my device. I choose Evo 4G LTE (Jewel).
That brings me to this page: http://teamw.in/project/twrp2/98
They suggest I do the android app install method. I follow the first link (Market Link)
and install GooManager, and follow their steps.
Install the app and open it. Tap menu then hit Install OpenRecoveryScript. Tap Yes. Verify that the filename displays your device's code name and hit Yes. The file will download and your device will reboot and install the recovery automatically.
This all goes smoothly, but here's my issue.
It doesn't reboot automatically, or install anything automatically.
I see in the comments a recommendation to reboot into recovery mode.
I choose that in GooManager's menu, and after rebooting I get my bootloader screen with 4 menu options:
Bootloader
Reboot
Reboot Bootloader
Power Down
The only one that sounds sensible to me is bootloader so I pick that.
Now I get some new options:
Fastboot
Recovery
Factory Reset
Clear Storage
Simlock
Image CRC
Show Barcode
So, the only one that makes sense is Recovery. I choose it. The phone reboots.
Now I'm back at the first menu. So I'm in a loop.
Nothing I do in this loop seems to install anything.
So I just rebooted the phone normally and I'm back to my OS.
Where to go from here?
CreeDo said:
OK I've been working on this all afternoon and I'm at an impasse.
You've been a huge help so far and I hope you can guide me through this part.
I want to S-OFF and am following a tutorial: http://www.thefortressofnerditude.com/s-off-your-sprint-htc-evo-4g-lte/
Step 3 says root and install recovery. So I decide I need TWRP.
Already have nandroid and titanium backups both completed.
And I copied the whole SDcard to my computer after.
Annoyingly, TWRP's install page suggests that I need to be in S-OFF.
TWRP says I need S-OFF. S-OFF guide seems to suggest I need TWRP working.
I installed "TWRP Manager". Realize that might not be the same thing as TWRP.
Googled and found it on the TeamWin page.
The page asks first to input my device. I choose Evo 4G LTE (Jewel).
That brings me to this page: http://teamw.in/project/twrp2/98
They suggest I do the android app install method. I follow the first link (Market Link)
and install GooManager, and follow their steps.
Install the app and open it. Tap menu then hit Install OpenRecoveryScript. Tap Yes. Verify that the filename displays your device's code name and hit Yes. The file will download and your device will reboot and install the recovery automatically.
This all goes smoothly, but here's my issue.
It doesn't reboot automatically, or install anything automatically.
I see in the comments a recommendation to reboot into recovery mode.
I choose that in GooManager's menu, and after rebooting I get my bootloader screen with 4 menu options:
Bootloader
Reboot
Reboot Bootloader
Power Down
The only one that sounds sensible to me is bootloader so I pick that.
Now I get some new options:
Fastboot
Recovery
Factory Reset
Clear Storage
Simlock
Image CRC
Show Barcode
So, the only one that makes sense is Recovery. I choose it. The phone reboots.
Now I'm back at the first menu. So I'm in a loop.
Nothing I do in this loop seems to install anything.
So I just rebooted the phone normally and I'm back to my OS.
Where to go from here?
Click to expand...
Click to collapse
Did you unlock your boot loader first? You don't need to be S-off to install a custom recovery. Unlock your bootloader at htcdev.com then install twrp.
Read here for more info:
http://forum.xda-developers.com/showthread.php?t=2420916
Also, I suggest learning how to use fastboot commands. Install twrp using fastboot.
Sent from my EVO using XDA Premium 4 mobile app
OK, so I'm semi-bricked but not panicking yet.
Here's where I'm at.
• Unlocked boot loader successfully
• Installed TWRP using fastboot.
• Followed instructions as closely as I could on moonshine.io to get S-OFF working.
Several times during the process I got "installing device driver software" in my win7 system tray.
Not sure if that's normal. But the drivers seemed to install fine. At first.
But then, during this part of the process:
Moonshining .................(1)
Windows prompted me that it was installing some drivers again, But it failed to install the MTP driver.
After ten tries with the "Moonshining" step, I got "ERROR: don't drink and moonshine!" or something like that.
So, it seems like I need to get this MTP driver going. First I tried solutions on the computer:
• Uninstalled all HTC software, unplugged phone, rebooted,
installed HTC Sync Manager (setup name setup_3.0.52.0_htc.exe), then uninstalled it...
because a tutorial said this would keep the drivers but remove the software. Still no luck on the MTP driver though.
• Found "Mass Storage Device" (my phone) under device manager, removed it, unplugged, rebooted, replugged.
• Plugged cord into back of PC, so I'm using USB 2.0 rather than USB 3.0.
• One suggestion said a certain registry section might have an upperfilter key that shouldn't be there.
But I don't have that upperfilter key so that's not the issue.
Some fixes require getting into my phone (one guy suggests turning off USB debugging)...
but I no longer have a working OS. I can get into my bootloader, I tried Factory Reset.
But after choosing this I go into TWRP and I have no TWRP backups that I can restore.
So my next guess is, I need to get a recovery ZIP (is that basically a ROM?) that TWRP can install.
If that's correct, what ZIP should I get? I was on Android 4.0.3 Sense 4.0, can I download jellybean with Sense 5.0,
and install it via TWRP?
That was my goal all along, but I'm determined to get S-OFF working, so if doing that means my phone gets wiped again,
I guess I just want whatever ROM/recovery/whatever that allows me to change this USB debugging setting,
and try other phone-related fixes to the MTP driver issue.
First of all, flash an ICS rom. I'm assuming that you are still using the same ICS firmware, and you will want to have your phone operational (to enable USB debugging). The link for MeanRom ICS still works. http://old.androidfilehost.com/main/EVO_3D_Developers/mikeyxda/LTEvo/MeanROM-ICS-v65-jewel-ltevo.zip
Ok....since you are on the old HBoot, I think that you need to use the older S-Off methods (LazyPanda or DirtyRacun), if I'm not mistaken. You can not download and flash Sense 5.0 through TWRP as of yet, because you need to be using the new firmware to do so. You may want to pay http://unlimited.io/jewel.htm a visit. Also, to use LazyPanda or DirtyRacun, you need to be using Ubuntu. Another option that you have is to use the regular RUU and update directly to Sense 5.0. You will be stock, unrooted, but you can easily use the latest S-Off method.
Lastly, for your rooting/S-Off needs, you can also use a handy-dandy toolkit from @WindyCityRockr that can handle everything that you need to do. I usually encourage manual labor, but there are some exceptions. http://forum.xda-developers.com/showthread.php?t=2436217
Thanks again for jumping in.
I'm getting somewhere, but still so many difficulties.
Fix one thing, break two more.
I finally have a new working rom, but almost against my will it ended up
being CyanogenMod.
The short version:
- unlocked bootloader, got TWRP going, finally got ADB working (don't think it's the right driver,
but whatever, ADB commands work fine), wiped everything... factory reset, Dalvik, external storage.
- Didn't wipe Internal storage, I wiped only /data/ per some post's recommendation.
- I used ADB PUSH to get a few possible roms onto /sdcard/
PJ75IMG_1.13.651.1.zip (failed with "unable to open zip")
(ROM)_Stock_Rooted_OTA_(3.16.651.3)V2.zip (failed with "unable to execute updater binary in zip")
cm-10.2.0-jewel.zip (cyanogenmod) - success!
So, the phone works. It appears to be at least based on android 4.3... and I'm guessing CM, which updates
frequently, has all those OTA updates bundled into it. Any downsides to CyanogenMod?
I could just proceed from here to reinstall my old apps etc.
I'm still not "S-OFF" which annoys me, but I read a post suggesting it's not really that necessary.
The way they put it is, s-off allows you to access partitions so they can be modded,
but nobody is developing anything interesting for those partitions. Like nobody's doing custom radios and such.
Should I still pursue S-OFF anyway?
If so, is there a way to do it with CyanogenMod?
That awesome app (Windroid Universal Toolkit) doesn't recognize the phone.
Last question, how should I go about restoring everything?
I had titanium and nandroid backups copied to my computer.
Can it restore to such a wildly different version of the OS?
Can I get back not just apps, but stuff like my keyboard preferences, texting history, etc.?
Should I still pursue S-OFF anyway?
Click to expand...
Click to collapse
Yes! Being S-On is a complete pain in the BUTT when switching AOSP roms. Have you tried to flash the rom that I posted, MeanRom ICS? I'm really trying to get you to stay on Sense, because S-Off and other different tools work so much better while using Sense. AOSP is better after S-Off. But that's up to you.
If so, is there a way to do it with CyanogenMod?
Click to expand...
Click to collapse
I am not sure. You can try if you have the time. I suggest making a nandroid of your CM rom, and try to flash a Sense ICS rom, not JB...yet.
That awesome app (Windroid Universal Toolkit) doesn't recognize the phone.
Click to expand...
Click to collapse
CM might be the issue here, as well as it might not.
Last question, how should I go about restoring everything?
I had titanium and nandroid backups copied to my computer.
Can it restore to such a wildly different version of the OS?
Click to expand...
Click to collapse
Yes, TB will still work. There are some apps that might cause the restoration process to freeze, so I suggest killing TB and skipping over the app that froze the process when you return.
Can I get back not just apps, but stuff like my keyboard preferences, texting history, etc.?
Click to expand...
Click to collapse
If your keyboard preferences was not backed up, then no. If you were using the stock Sense keyboard, then that is a no as well. As long as your texting history was backed up, it can be restored. Texts are not like apps...their data is typically stored in XML files which are readable through any version of Android (2.3+).
I'm still soliciting my help if you need it.
I'm for sure going to need it, so thanks very much for the ongoing support!
I got discouraged after all the failures but I'll download Meanrom now.
The thing is... now that Cyanogen mod works, I hesitate to wipe it and try a new one.
Especially since several other roms I tried mysteriously failed to install.
I like that it's jellybean and don't wanna move backwards to ICS.
And I like their goal of cutting out the fluff.
I still want S-OFF, will I end up having to wipe everything again to get it?
Also, I really don't feel confident I have the right drivers for my windows machine.
I can transfer files in USB mode, go into USB debugging, and do the usual ADB commands.
But the phone shows up as a nexus in device manager, but it's definitely evo 4G lte.
I tried installing an executable RUU and it failed after a bit saying it can't detect the device.
And there's that issue where Windroid doesn't detect it.
So I have the feeling that without the right USB drivers, tools like Moonshine will still fail.
I specifically got errors every time when anything tried to install MTP usb drivers. Do I really need them?
You think LazyPanda or DirtyRacun's tools will work even if I never get the MTP thing installed?
CreeDo said:
I'm for sure going to need it, so thanks very much for the ongoing support!
I got discouraged after all the failures but I'll download Meanrom now.
The thing is... now that Cyanogen mod works, I hesitate to wipe it and try a new one.
Especially since several other roms I tried mysteriously failed to install.
I like that it's jellybean and don't wanna move backwards to ICS.
And I like their goal of cutting out the fluff.
I still want S-OFF, will I end up having to wipe everything again to get it?
Also, I really don't feel confident I have the right drivers for my windows machine.
I can transfer files in USB mode, go into USB debugging, and do the usual ADB commands.
But the phone shows up as a nexus in device manager, but it's definitely evo 4G lte.
I tried installing an executable RUU and it failed after a bit saying it can't detect the device.
And there's that issue where Windroid doesn't detect it.
So I have the feeling that without the right USB drivers, tools like Moonshine will still fail.
I specifically got errors every time when anything tried to install MTP usb drivers. Do I really need them?
You think LazyPanda or DirtyRacun's tools will work even if I never get the MTP thing installed?
Click to expand...
Click to collapse
Feel free to try the facepalm S-off method as well. Works on devices with older software and is super easy. Look here:
http://forum.xda-developers.com/showthread.php?t=2163013
Sent from my Nexus 5 using XDA Premium 4 mobile app
Evolution_Freak said:
Feel free to try the facepalm S-off method as well. Works on devices with older software and is super easy. Look here:
http://forum.xda-developers.com/showthread.php?t=2163013
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Cheers, it does look pretty straightforward.
Of course that's what I thought hours ago when I tried moonshine haha.
I'll give it a go.
To be clear, does this method wipe anything?
They don't actually say.
CreeDo said:
Cheers, it does look pretty straightforward.
Of course that's what I thought hours ago when I tried moonshine haha.
I'll give it a go.
To be clear, does this method wipe anything?
They don't actually say.
Click to expand...
Click to collapse
Can't remember if it wipes or not. Best thing to do is make a backup with TWRP and keep the backup on your external SD card. If it wipes you can always restore your backup.
Sent from my HTC device
Thanks for the help so far guys. I am currently really enjoying Cyanogenmod. I suspect it's eating battery more,
but then against I am on the phone for hours redoing everything that got changed/removed.
Does anyone know if there's a simple way (or even a difficult way) to restore my texts?
Because the app is totally different, and the old text app was the one that came
with the stock rom, I cannot restore it in titanium. But if I could extract even the raw text that'd be helpful.
Get back to Sense, or get someone with Sense to restore it for you, and save it using a different app. Or maybe try using SMS Backup & Restore from the Play Store. I'm not sure if it can read the backups saved through Sense, but it's worth a try. You just have to navigate to the location of the old backup.
It looks like I can import an XML in this messaging app so maybe if sense offers an export to XML option, I'll be set.
Sense is sort of an OS on top of the OS, right?
Can sense be loaded without flashing a new rom? or is it too integrated with the OS?
Related
I tried to flash a custom rom on my eris last night with unsuccessful results.
To begin, my phone had the newest 2.1 OTA update on it and is running HBOOT 1.47. I downloaded and ran the 1-click universal root app. I noticed that a few new apps showed up (Latitute), but the Superuser app did not. I re-ran it several times but it still wouldn't show up.
Getting ahead of myself, I decided that I probably *DID* root the phone and I flashed Kaosfroyo V29 through the recovery menu. As I rebooted, the phone hung at the loading screen. I then tried to flash the Cyanogen mod with the same results.
After looking around, it appeared that the HBOOT 1.47 was exploitable with the 1.5 PB00IMG.zip update. I loaded it to my sd card and booted the phone in quickboot. It recognized the image but did not give me the option to update.
So now I am left with a phone that won't boot and without a backup (I know, I know).
What are my options? Is it still rootable from the recovery menu? Should I take it back to verizon and see if they can reflash/replace it (Doubtful as I probably voided the warranty).
wolfpack10 said:
I tried to flash a custom rom on my eris last night with unsuccessful results.
To begin, my phone had the newest 2.1 OTA update on it and is running HBOOT 1.47. I downloaded and ran the 1-click universal root app. I noticed that a few new apps showed up (Latitute), but the Superuser app did not. I re-ran it several times but it still wouldn't show up.
Getting ahead of myself, I decided that I probably *DID* root the phone and I flashed Kaosfroyo V29 through the recovery menu. As I rebooted, the phone hung at the loading screen. I then tried to flash the Cyanogen mod with the same results.
After looking around, it appeared that the HBOOT 1.47 was exploitable with the 1.5 PB00IMG.zip update. I loaded it to my sd card and booted the phone in quickboot. It recognized the image but did not give me the option to update.
So now I am left with a phone that won't boot and without a backup (I know, I know).
What are my options? Is it still rootable from the recovery menu? Should I take it back to verizon and see if they can reflash/replace it (Doubtful as I probably voided the warranty).
Click to expand...
Click to collapse
Try installing the engineering Bootloader. Instructions can be found in a sticky called Eris roll-up in the Eris developement section. Even if you can't flash a custom Rom after this you can still flash the official 2.1 ruu which will put your phone back to 100% stock and you can try again.
If your rooted and can still boot to fastboot your not bricked.
Sent from my Eris using XDA App
If the bootloader still appears (power phone on with vol-down+end), your phone is not bricked.
If the recovery boot still appears (power phone on with vol-up+end), your phone is not bricked.
If you don't have a SD card reader on your PC, you can transfer a different ROM to your SD card by booting to recovery and using the USB-MS toggle.
Smart money says that all you failed to do when you installed the ROM was perform a wipe before you flashed the ROM.
Prove this to yourself by installing a conservative ROM such as PlainJane, and when you get it running, for Dog's sake, make an effing Nand backup.
bftb0
I know for a fact it isn't rooted though (It says S-UP on the Recovery Menu).
Can I actually install alternative bootloaders on an unrooted phone?
Also, I want to avoid flashing the official RUU because it updates the HBOOT to 1.49 which, to my knowledge, has not be exploited yet.
Do either of you know why the PB00img.zip didn't work? I read multiple places that it should work with my HBOOT version.
Also, why didn't the 1-click root work? I haven't done anything like this previously and I bought the phone new at version 1.5.
wolfpack10 said:
I know for a fact it isn't rooted though (It says S-UP on the Recovery Menu).
Can I actually install alternative bootloaders on an unrooted phone?
Also, I want to avoid flashing the official RUU because it updates the HBOOT to 1.49 which, to my knowledge, has not be exploited yet.
Do either of you know why the PB00img.zip didn't work? I read multiple places that it should work with my HBOOT version.
Also, why didn't the 1-click root work? I haven't done anything like this previously and I bought the phone new at version 1.5.
Click to expand...
Click to collapse
Do you still have ra recovery? If so simply boot to recovery, wipe data and cache and reflash the rom.
All the 1 click root does is flash the custom recovery, so it did work.
Fyi
The Eris can now be rooted no matter what Bootloader version you have so doing the ruu will not prevent you from rooting. I myself was a leaker and had no problem rooting with the 1.49 s-on Bootloader.
As stated by btfb0, ALWAYS wipe data and cache before flashing a new Rom. ALWAYS do or have a nand backup ready just in case.
Sent from my Eris using XDA App
wolfpack10 said:
I know for a fact it isn't rooted though (It says S-UP on the Recovery Menu).
Click to expand...
Click to collapse
If you see the text "S-OFF" at the top of the screen, that is the bootloader, not the recovery boot. The one-click rooting method does not touch the bootloader, so, after successfully using "one-click", you will still have the same bootloader (initially).
wolfpack10 said:
Can I actually install alternative bootloaders on an unrooted phone?
Click to expand...
Click to collapse
You can install the Root PB00IMG.ZIP file onto a 1.46.xxxx or 1.47.xxxx bootloader phone - but you don't need to, because your phone already has a custom recovery installed on it (Amon_RA). As I mentioned previously, you get to that recovery facility by one of two ways:
1) Power phone off. Press and hold Vol-Up and then End/Power; continue to hold both keys down until you see the three skating droids appear (Don't release the keys until you see that screen). A menu system should appear 10 seconds after that happens. It will say "Amon_RA" on the bottom of the screen.
2) Make sure there are no files named PB00IMG.ZIP in the root folder of the SD card; either that or eject the SD card. Power the phone off. Press and hold Vol-Down and then End/Power; continue to hold both keys down until you see the three skating droids appear (Don't release the keys until you see that screen). A menu will appear immediately. One of the items will indicate that if you press "Vol-Up", you will boot into recovery. Press Vol-Up, and wait 10 seconds. You should be at the Amon_RA menu. (At this point, you can re-insert the SD card if you previously ejected it).
If you can't get either of these things to work, report back with exactly what you observe - saying "it didn't work" might be correct, but it isn't very informative.
wolfpack10 said:
Also, I want to avoid flashing the official RUU because it updates the HBOOT to 1.49 which, to my knowledge, has not be exploited yet.
Click to expand...
Click to collapse
Not correct. Both the "one-click" and "Dummies" methods (see All Things Root forum over at AF) work for 1.47, 1.49.0000, and 1.49.2000 bootloaders.
wolfpack10 said:
Do either of you know why the PB00img.zip didn't work? I read multiple places that it should work with my HBOOT version.
Click to expand...
Click to collapse
The PB00IMG.ZIP files are not compatible with the Amon_RA "update"-style installs; they are signed using an entirely different method. Not compatible. That's why it didn't work when you tried it (using Amon_RA). They are installed by starting up the bootloader with the PB00IMG.ZIP file in the root folder of the SD card. I am recommending that until you understand things a little better, you avoid this method - it only works with certain combinations of bootloaders and PB00IMG.ZIP file versions.
wolfpack10 said:
Also, why didn't the 1-click root work? I haven't done anything like this previously and I bought the phone new at version 1.5.
Click to expand...
Click to collapse
It did work. You indicated in your first post that you used the Amon_RA recovery, which was installed by that method.
bftb0
Thanks for the detailed responses. I know I should have researched this stuff more before I started toying with it but I'll just have to pay the price.
I wiped and flashed KaosFroyo V29 from the recovery menu and it finally booted. Many thanks for that suggestion.
Hopefully this thread will be helpful for other people in the future.
In the mean time, I lost all my contacts so lesson learned.
wolfpack10 said:
Thanks for the detailed responses. I know I should have researched this stuff more before I started toying with it but I'll just have to pay the price.
I wiped and flashed KaosFroyo V29 from the recovery menu and it finally booted. Many thanks for that suggestion.
Hopefully this thread will be helpful for other people in the future.
In the mean time, I lost all my contacts so lesson learned.
Click to expand...
Click to collapse
Contacts should have been backed up through google. Although I have leaked and rooted some friends phone and their contacts never sync'd to their phones.
Sent from my Eris using XDA App
wolfpack10 said:
Thanks for the detailed responses. I know I should have researched this stuff more before I started toying with it but I'll just have to pay the price.
I wiped and flashed KaosFroyo V29 from the recovery menu and it finally booted. Many thanks for that suggestion.
Hopefully this thread will be helpful for other people in the future.
In the mean time, I lost all my contacts so lesson learned.
Click to expand...
Click to collapse
Glad you got it working.
If you were using Gmail instead of the HTC mail app for managing your contacts, all your contacts are still "in the cloud" (so long as you did not define them to be "phone only" when you added them).
If they were phone-only contacts, it would have been a simple matter to get your contacts back if you had made an initial Nandroid backup. I'm not saying that to add insult to injury, but rather (as you said) "Hopefully this thread will be helpful for other people in the future."
Backups are a really good thing.
BTW - You will find that Android Forums is a useful adjunct to this forum. The reason is that the ROM devs over here on XDA have their hands full trying to do both development work and interact with the users/testers reporting issues with their ROMs, so they don't spend much time in here (Q&A or General sub-forums). When they do announce a new hack, or patch, or rooting method, the descriptions are many times written tersely (for subject-matter experts, not newbs). There are a number of very helpful folks over on AF, and some good "sticky" posts that are quite a bit more detailed than what you will find here. I'm not ragging on XDA at all; just saying that by nature of the focus required for development work, the experts can't give much personal attention to individual users, even if they want to.
bftb0
UPDATE: The latest update still is safe. I just installed it and I am still s-off.
UPDATE: The update to Jellybean does not write the secure flag and this method is safe to apply the OTA update with this method and still maintain root access afterwards.
First and foremost, a couple disclaimers.
FIRST, YOU MUST BE S-OFF FOR THIS TO WORK. PLEASE DO NOT TRY THIS IF YOU ARE NOT ALREADY S-OFF.
SECOND, FOR THE OTA UPDATE 1.22.651.3 YOU WILL FOR SURE RETAIN S-OFF. ALTHOUGH HIGHLY UNLIKELY, HTC COULD POTENTIALLY MAKE YOU S-ON IN FUTURE OTA UPDATES. SEE HERE FOR MORE INFORMATION.
To obtain s-off please see this thread: http://unlimited.io/jewel.htm
Once you are s-off you can install the OTA update no problem and still retain root. I understand that there are rooted ROMs that come out within a day or whatever, I find this method just easier and less annoying that waiting for a rooted stock ROM to come out. I don't really theme, mod, or do crazy things with my phone but still want root access. So, I decided since I was s-off, I would give this method a whirl. I am happy to report that I am s-off, with TWRP, fully rooted, and with installing the OTA update. I had a little hiccup but was able to solve that.
So, here is the process. This is kind of a hodge podge of different threads, ideas, devices, and versions of android so if I didn't give you credit, please let me know and I will put you in this thread.
Process for installing a stock recovery. I have already created some stock recovery files so see at the bottom of this post for the zip file that includes the stock recovery. If you wish to use these files, just start with step #10.
IF YOU CHOOSE TO JUST DOWNLOAD THE STOCK RECOVERY AT THE BOTTOM OF THIS POST, SKIP TO STEP #10.
Creating Stock Recovery File Manually
1. Install a stock recovery if you don't already have one.
2. To do so, get the RUU for the version you are running.
3. Run the RUU (don't connect to your phone at all)
4. Navigate to your temp directory on your computer (on windows 7 it is C:\Users\your_user_name\AppData\Local\Temp)
5. Find a folder that looks like it is in the following format "{XXXXXX-XXXX-XXXX-XXXX-XXXXXXXX}" It might help to sort by date modified. The folder should have the current date
6. Inside the folder might be a couple other folders. Navigate through the folder to find a zip that says "firmware" or "rom" (mine said rom)
7. Extract the content to a folder in the same directory called rom
8. Navigate into the rom folder and find two files android-info.txt and recovery_signed.img. Copy those to a directory of your choice.
9. Send those files to a zip folder and name the file "PJ75IMG.zip" without the quotes. Make sure zip is only listed once. If you have file extensions hidden in windows yours will only say "PJ75IMG".
Installing the stock recovery, OTA, and regaining root
10. Place the stock recovery file on the root of your sd card
11. On your phone, head into settings and power and make sure the fastboot option is unchecked
12. Power down phone
13. Once phone is completely shut down, hold the volume down button and press the power on button while keeping the volume down button pressed.
14. It will boot into your hboot (verify it says s-off at the top or don't proceed) and find the file you placed on your sd card and ask you if you want to update. click volume up for yes. Reboot once finished. After your phone boots up, navigate to the root of your sdcard and delete PJ75IMG.zip
15. Go to settings>check for updates and check to see if there is an update. Download the update. Once it verifies, click install now. It should install just fine.
16. Once you are up and running, download one of the dirty racun hboots. I used hboot 2.09 img found here. Follow the instructions on the unlimited.io website how to flash the hboot by using fastboot (flashing the zip doesn't seem to be working.
update. click volume up for yes. Reboot once finished. After your phone boots up, navigate to the root of your sdcard and delete PJ75IMG.zip
17. Make sure usb debugging is checked under settings>developer options
18. Go download a su zip file. I used this one here and place it on the root of your sd card.
19. Go grab a custom recovery flashable zip (could not find the latest twrp zip) or img (I used TWRP found here. Take the image and place it in your platform tools folder for ADB.
20. Plug in phone while powered on and type in adb devices to make sure you are connected.
21. If you see a device type in
Code:
adb reboot bootloader
22. Your device will boot into your bootloader and you will see fastboot usb (make sure usb debugging was checked if you don't see that).
23. Then type fastboot flash recovery [filename] of the recovery img you downloaded. Once flashed, toggle with the volume up buttons to bootloader and then select recovery. This should boot you into TWRP
24. Once in recovery, install the su zip you downloaded in step 18.
25. Reboot and Enjoy!!!!
You are now rooted with the most current OTA update and all the goodies (radios, PRI, etc.)
This process should hopefully hold true for any future OTA updates if you are S-OFF. The only thing you will have to find is the current RUU to create the stock recovery. If this helped, feel free to thank! Go XDA!
There already are rooted stock roms out.
Why even risk it? It takes less than a day
Sent from my EVO using Tapatalk 2
Rxpert said:
There already are rooted stock roms out.
Why even risk it? It takes less than a day
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I don't know. So you don't have to wait at all? Or for the people that aren't accustomed to flashing ROMs or don't care to. I prefer this method for whatever reason and it seems just easier. Personal preference though. The beauty of android and their strong developer network is that it gives the users choices. I can take the OTA update as soon as it comes out and don't have to worry about waiting for anything. Just another method I guess.
TLR there are already rooted stock roms in one of the dev forums. Flash it and flash the update firmware via bootloader and you're done.
Sent from my htc_jewel using Tapatalk
msimindlessmsi2 said:
TLR there are already rooted stock roms in one of the dev forums. Flash it and flash the update firmware via bootloader and you're done.
Sent from my htc_jewel using Tapatalk
Click to expand...
Click to collapse
The update firmware is the part that hangs me up. I believe when it was back in the original EVO days that some people were having problems updating their PRI version and it screwed up some things with wimax. That is when I decided I would just accept the OTA to get everything they included in the update and then gain root access through this method.
Again, to each their own. Please try not to clutter up the thread with off topic items. Thanks.
Because all of the ROM flash threads state you have to do a factory reset. Even with Titanium, I don't have the time to reset everything back up the way I want it... including all the folders I've created, etc. If you could flash a ROM and maintain all your data intact, I might consider it. Perhaps there's something I'm unaware of.
Rxpert said:
There already are rooted stock roms out.
Why even risk it? It takes less than a day
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
im coming from the rezound, i just want the updated firmware! on my rez being s-off i could run ANY firmware ICS, or GB and then go back to whatever rom i was running. im wondering if im s-off, i should b able to do the same thing right.
greyopaque said:
Because all of the ROM flash threads state you have to do a factory reset. Even with Titanium, I don't have the time to reset everything back up the way I want it... including all the folders I've created, etc. If you could flash a ROM and maintain all your data intact, I might consider it. Perhaps there's something I'm unaware of.
Click to expand...
Click to collapse
The devs state that so that they don't have to spend their valuable time troubleshooting because you didn't flash right. Its always best to do a full wipe, but not always required when flashing an updated version of the same ROM.
1) Nandroid.
2)Wipe Dalvik cache & cache
3) Flash
You retain all data.
If you have issues, then you nand restore and do a full wipe before bugging the devs
bpdamas said:
Once you are s-off you can install the OTA update no problem and still retain root. I understand that there are rooted ROMs that come out within a day or whatever, I find this method just easier and less annoying that waiting for a rooted stock ROM to come out.
Click to expand...
Click to collapse
Lmao! You find that whole process "easier" than waiting for a day? I think it might take the better part of a day to do all that.
Sent from my EVO using xda premium
Thanks for taking the time to do a write-up OP!
Good tutorial. I actually waited but this definitely a decent tutorial. Don't listen to anyone saying that it is dumb not to wait. Why do they care what you do with your device?
Sent from my EVO using Tapatalk 2
Actually, TWRP has a PJ75IMG.zip on their site that can be flashed the same way as the HBOOT. And then, you can flash Superuser from TWRP.
I did everything from my SD card. And, in response to the person saying it would take the better part of the day... the whole thing took me barely 10 minutes, and I have a completely updated phone, all the firmware, radios, etc. And all my data and settings are intact. I think that for someone like me that likes everything stock, but rooted (for WiFi Tether and Adblock), this is the best way to go.
greyopaque said:
Because all of the ROM flash threads state you have to do a factory reset. Even with Titanium, I don't have the time to reset everything back up the way I want it... including all the folders I've created, etc. If you could flash a ROM and maintain all your data intact, I might consider it. Perhaps there's something I'm unaware of.
Click to expand...
Click to collapse
Agreed.
EPayne123 said:
Good tutorial. I actually waited but this definitely a decent tutorial. Don't listen to anyone saying that it is dumb not to wait. Why do they care what you do with your device?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Definitely agreed.
greyopaque said:
Actually, TWRP has a PJ75IMG.zip on their site that can be flashed the same way as the HBOOT. And then, you can flash Superuser from TWRP.
I did everything from my SD card. And, in response to the person saying it would take the better part of the day... the whole thing took me barely 10 minutes, and I have a completely updated phone, all the firmware, radios, etc. And all my data and settings are intact. I think that for someone like me that likes everything stock, but rooted (for WiFi Tether and Adblock), this is the best way to go.
Click to expand...
Click to collapse
I know. This is exactly why I root and I can't believe there are so many people against this method. It seems very simple to me and I can have a stock recovery waiting to flash as soon as an OTA update comes out. Oh well.
Thanks for this info. I think I'm like you and not only like the stock experience and its benefits but also prefer diy when possible.
Of course I never seem to stay stock like you but I like doing the steps my self. To each their own is the beauty of android.
Go android!
Sent from my EVO
i just noticed my internal was wiped for some odd reason? im attempting to run the previous ruu, to get my notification sounds and everything back.
Rxpert said:
There already are rooted stock roms out.
Why even risk it? It takes less than a day
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
One advantage to me would be you're getting the official ROM/update, and you don't have to worry about a malicious dev slipping in some malware.
zounduser said:
i just noticed my internal was wiped for some odd reason? im attempting to run the previous ruu, to get my notification sounds and everything back.
Click to expand...
Click to collapse
Very curious on this. Nothing in this method should affect this.
Robbie_G said:
One advantage to me would be you're getting the official ROM/update, and you don't have to worry about a malicious dev slipping in some malware.
Click to expand...
Click to collapse
..... I'm blown away by this.
Really?
Why do you even have S-off then? That required you down download specific drivers, and run a program as an administrator on your computer. If you're concerned about a rogue dev they would've royally screwed you there.
/Tin Hat
Rxpert said:
..... I'm blown away by this.
Really?
Why do you even have S-off then? That required you down download specific drivers, and run a program as an administrator on your computer. If you're concerned about a rogue dev they would've royally screwed you there.
/Tin Hat
Click to expand...
Click to collapse
That's fair, rooting and s-off could also inject malicious code. But so can ROM makers.
I think there's a difference between trying to be safe and being paranoid. If there is a way for someone to make money off of you/steal your identity, eventually they will try. I'm not suspicious of any of the current devs, but it's something we should maybe be more aware of. Look at all the warez Windows out there with malware built in to steal your information.
EPayne123 said:
Good tutorial. I actually waited but this definitely a decent tutorial. Don't listen to anyone saying that it is dumb not to wait. Why do they care what you do with your device?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Totally agree. Its a good thing to learn in my opinion. I broke my Evo 4G, fixed it then rerooted it. Now on the 4G LTE got it rooted with custom rom. Love learning new things plus some of the good things that come with rooting and custom roms are worth it for me.
This guide will enable you to easily root your phone in 6 steps. I've taken out the mystery and complications.
1) Go to HTC Dev site and manually unlock your bootloader. Select "register" and create your account.
1a) After you are registered select "all other supported models" in the pull down box
1b) Click "begin unlock bootloader". it will ask "are you sure" yes of course you are. acknowledge legal terms. then continue.
1c) Ignore the battery pull instructions as we can't pull the battery. hold down the power key and the volume down key until the bottom buttons stop flashing and your phone shuts off (don't worry if you take a screenshot. It happens all the time). then release ONLY THE POWER BUTTON. Keep holding the volume down key until the bootloader screen shows up.
1d) Follow "step 3" and the rest of the instructions as listed on the HTC site to unlock your bootloader manually.
2) Install android ADB/SDK on your pc. This video shows how to do it nicely:
2a) ****NEW UPDATED 03/05/13*** Alternatively if you DON'T want to install ADB/SDK you can just download the NON-FLASHABLE platform-tools.zip file located in my dropbox folder here.
Just extract this folder to your desktop using WINZIP or whatever archive tool you use and proceed to step 3.
3) Open a command line in your "platform-tools" folder by holding shift+right click anywhere within the folder and selecting the menu option "open a command window here". Then click here to install TWRP using fastboot. Follow the "Download - Fastboot Method:" instructions.
3a) If your phone isn't detected by windows please install the proper USB drivers for your operating system. Go here for 32bit. Go here for 64 bit.
4) Flash SuperSu and Busybox on your device:
4a) Click here and download the latest version of SuperSu. save it to your sdcard.
4b) Go to my dropbox and download Busybox 1.20.2 and save it to your sdcard.
5) Reboot into recovery (via the bootloader selection)
6) Flash the SuperSu zip and the Busybox zip listed in 4a and 4b
That's it!
"So now what?" you may be asking.
You are now free to flash ROMs that support s-on.
Two are my favorites are
(1) Stock with Goodies. (my personal favorite and the one I use today). This is a great ROM for beginners and people who prefer a slimmed down ROM (minus the bloat) and lots of free memory!
(2) Viper4G. This is a ROM for more experienced users and offers TONS of customization.
You can also run apps from Google play that required ROOT access!
If you're feeling slightly adventurous you can flash a custom kernel (which will allow you to overclock your phone). Two of the kernels I use are:
(1) ElementalX by flar2. Click here to take a trip over there. This one is especially important to flash as it seems HTC was up to shenanigans with the latest HBoot (2.09).
If you're unlucky enough to have HBoot 2.09 they have RESTRICTED access to your /system partition. What does this mean to you? It means that if any app writes to your /system partition (ROOTED or not) the phone will "panic" and reboot. Shady behavior if you ask me. The solution? Flash this kernel! it will give you write access so that everything works properly.
(2) The Arc-Reactor kernel! This one is for people that are s-off (see below for an explanation of s-off) only! It's the kernel I currently use and is the fastest kernel out there! Highly recommended if you decide to go s-off!!!
If and when you're feeling more adventurous you can go "s-off" (security off) which removes any security limitations of your phone. It makes flashing ROMs and updating firmware a lot easier. You can find out about s-off by taking a trip over to the DirtyRacun thread here. I will NOT walk you through this process. They will totally help you on their IRC channel. Just read post # 1 in that thread.
There's also a new method of s-off which literally takes 2 minutes. It's called facepalm and is located here But is NOT for the feint of heart, bad typers, nor people that cannot follow instructions! Why? One typo here and your phone is a brick. A paperweight. Useless. Well...you can recover...but that's not the purpose of this thread. If you DO brick your phone PM me. I'll help you out.
I take NO credit for any of this. It's all out there to learn I just put it all together. In one spot. Any questions feel free to PM me.
If I helped you out hit the THANKS button...or buy me a beer! Either way lol!
Tested and works with 3.16.651.3 (even if you took the OTA and have hboot 2.09 and are s-on)
Did you use SuperSU or Superuser for root access? Either way could you please update the binary to see if it succeeds or if you get an instant reboot?
lancemoreland said:
Did you use SuperSU or Superuser for root access? Either way could you please update the binary to see if it succeeds or if you get an instant reboot?
Click to expand...
Click to collapse
Everyone that is using supersu is experiencing that issue. The program itself will grant superuser access to your device. You don't need to open it. When you try and open it it will attempt to update the binary and then reboot the phone. You can ALWAYS reflash a new version of supersu when they update it.
To be clear: I'm up and running on my phone right now with superuser access. I'm fine unless I try to open the supersu program itself. Then I experience this issue you pointed out.
rawintellect said:
Everyone that is using supersu is experiencing that issue. The program itself will grant superuser access to your device. You don't need to open it. When you try and open it it will attempt to update the binary and then reboot the phone. You can ALWAYS reflash a new version of supersu when they update it.
To be clear: I'm up and running on my phone right now with superuser access. I'm fine unless I try to open the supersu program itself. Then I experience this issue you pointed out.
Click to expand...
Click to collapse
I agree. I am up and running also but the new hboot locks the system partition and any app that tries to write to it will cause a reboot. Ad-free is another example.
lancemoreland said:
I agree. I am up and running also but the new hboot locks the system partition and any app that tries to write to it will cause a reboot. Ad-free is another example.
Click to expand...
Click to collapse
Indeed this is a well documented problem but really not what this thread is about. Perhaps you can check out THIS thread where they are discussing this issue at length and hopefully they will come up with a solution for it?
http://forum.xda-developers.com/showthread.php?t=1538053
It also looks as though chainfire (the OP) is working on a fix if I read the last few posts correctly. and when he gets it I will update this post with it.
rawintellect said:
It also looks as though chainfire (the OP) is working on a fix if I read the last few posts correctly. and when he gets it I will update this post with it.
Click to expand...
Click to collapse
Yes I am participating in that thread. Chainfire is looking for a work around for his specific app, other apps that write to the system partition will no longer work. The point is that with Hboot 2.09 there are limitations and we will not enjoy full root as we have before when we were s-on.
Updated with an alternative superuser program.
SuperSU would ask to update binary and then just reboot. This fixed my problem for being able to access/deny and turn off messages. However it did not uninstall superSU will this cause a conflict having them both?
Edit: Okay I am dumb, I had to uninstall superSU first. Then I reflashed superuser to be able to have root privileges for my apps. When I just reflashed superuser hoping it would get ride of and superuser and keep root it did not.
Thanks it worked!
Help with rooting please.
So my phone was updated OTA without being rooted to 3.15.651.16 but now it is frozen. The touch screen will work temporarily upon a simulated battery pull and then freeze again only for me to simpull again and then it freeze again. I've gone into the bootloader and factory reset and wiped the cache but it's still messed up. So I think that maybe it's the software not installing correctly or something because this only started happening immediately after I download the new update.
I'm thinking about rooting my phone and even though I'm a pretty techy person this is new to me. I'm hoping that if I root my phone I can put it back to the stock software before the update and then just re-update OTA stock to the new update. I think that may fix it. Do y'all have any input it would be greatly appreciated as I have been dealing with this useless phone for over a week now.
Thanks.
MrSteez said:
So my phone was updated OTA without being rooted to 3.15.651.16 but now it is frozen. The touch screen will work temporarily upon a simulated battery pull and then freeze again only for me to simpull again and then it freeze again. I've gone into the bootloader and factory reset and wiped the cache but it's still messed up. So I think that maybe it's the software not installing correctly or something because this only started happening immediately after I download the new update.
I'm thinking about rooting my phone and even though I'm a pretty techy person this is new to me. I'm hoping that if I root my phone I can put it back to the stock software before the update and then just re-update OTA stock to the new update. I think that may fix it. Do y'all have any input it would be greatly appreciated as I have been dealing with this useless phone for over a week now.
Thanks.
Click to expand...
Click to collapse
Well my suggestion is to go ahead and unlock your phone, flash a recovery and root it using my instructions. Then if you want BONE stock flash the odexed version of Jellybean that Viperboy has in his thread located here: http://forum.xda-developers.com/showthread.php?t=2045929
Why am I suggesting you do this? Because the OTA was very bugged. HTC is VERY slow with fixes. Developers can fix errors in the base errors usually faster than HTC. And most importantly when you are feeling like a change you can flash a custom zip at any time. The ONLY downside to unlocking and rooting is that you void your warranty with HTC, but NOT with sprint! Sprint will still honor a replacement phone when you RELOCK your phone and use the RUU (which isn't available yet but will be) to bring it back to stock. Your bootloader will say *RELOCKED* which lets them know you unlocked it but again they will honor a replacement.
Updated thread with instructions on manually uninstalling supersu first before installing superuser 3.2
Thank you very much!
rawintellect said:
Well my suggestion is to go ahead and unlock your phone, flash a recovery and root it using my instructions. Then if you want BONE stock flash the odexed version of Jellybean that Viperboy has in his thread located here: http://forum.xda-developers.com/showthread.php?t=2045929
Why am I suggesting you do this? Because the OTA was very bugged. HTC is VERY slow with fixes. Developers can fix errors in the base errors usually faster than HTC. And most importantly when you are feeling like a change you can flash a custom zip at any time. The ONLY downside to unlocking and rooting is that you void your warranty with HTC, but NOT with sprint! Sprint will still honor a replacement phone when you RELOCK your phone and use the RUU (which isn't available yet but will be) to bring it back to stock. Your bootloader will say *RELOCKED* which lets them know you unlocked it but again they will honor a replacement.
Click to expand...
Click to collapse
Thanks I seriously appreciate it. I'm at work right now (I actually work at Sprint by the way which is why I'm not worried about having the phone replaced my tech will do it regardless) so I'm probably gonna look over your instructions carefully and then do this tomorrow. I'll let you know what happens I'm really hoping this will do it. It has to be some kind of serious installation bug in the new update because I never had this problem until literally minutes after updating.
And then after the completely stock RUU comes out (with no root or anything special) I can go back to completely locked and stock again? That's what I think I'd prefer but who knows I'm a Android and tech fanboy maybe I'll prefer the root.
MrSteez said:
Thanks I seriously appreciate it. I'm at work right now (I actually work at Sprint by the way which is why I'm not worried about having the phone replaced my tech will do it regardless) so I'm probably gonna look over your instructions carefully and then do this tomorrow. I'll let you know what happens I'm really hoping this will do it. It has to be some kind of serious installation bug in the new update because I never had this problem until literally minutes after updating.
And then after the completely stock RUU comes out (with no root or anything special) I can go back to completely locked and stock again? That's what I think I'd prefer but who knows I'm a Android and tech fanboy maybe I'll prefer the root.
Click to expand...
Click to collapse
yes. going back to stock is as simple as this:
(1) Boot your phone into the bootloader. make sure fastboot is selected. if you have the drivers installed correctly your phone will read "fastboot usb"
(2) if you followed my instructions on rooting you have ADB/SDK installed. so issue the command to relock your phone. type: fastboot oem lock
(3) run the RUU for 3.15.651.16. Done. Your bootloader will say *relocked* but it will be 100% stock.
Uh oh
I think i messed up. I did not see busy box installed and SuperSU is not updating.
The file listed in step 6 contains busybox. It also contains supersu. You want to flash the superuser file after flashing the file in step 6. It will overlay supersu with superuser 3.2. There is no need to update superuser 3.2 once you flashed it. It is the latest release.
Sent from my EVO using xda app-developers app
do i need to just flash the new superuser and it will fix the binary problema nd the titanium problem?
mobilecj said:
do i need to just flash the new superuser and it will fix the binary problema nd the titanium problem?
Click to expand...
Click to collapse
I replied to your email. But check my first post on the subject of superuser and how to uninstall supersu. if you need to that is. I tested this myself and it did uninstall supersu for me by just flashing superuser 3.2. Some people have reported this doesn't work for them.
okay sorry just got both i am going to try it now.. Its all knew to me it seemed like the information was explaining a dual process and i only had acquired one problem.. will post back in a few!
I have a ZTE Avail 2 which I recently managed to root with Cydia Impactor. Afterwards I managed to screw it up by removing too many stock apps with Titanium. I did it carefully, one by one, and for a few days everything seemed to work fine. But then apps started force-closing, '<name of app here> has stopped working', etc. Factory reset doesnt help, it just restores me to the same screwed up state I'm in now. I already know why, it's because I removed some of the stock apps, which I now realize it needs. I'm currently stuck on the AT&T logo when powering on, it never gets any further. But even while it was messed up it was still halfway-operable, and now this. This device's subforum on Android Forums is all but non-existent, and XDA doesnt seem to have anything for it.
What I need is a 100% stock ROM (pre-rooted if possible) that I can flash, along with instructions on how to flash it. I have some experience flashing ASUS devices and Samsung devices, mainly the Transformer pad, and the Note 2, but have also rooted miscellaneous other devices in the past without alot of issues. But I have no experience with ZTE. I've already checked the manaufacturer's website for some kind of recovery software I can use to restore it, there doesnt seem to be anything.
Thanks for any help!
Stephen Wayne Hamilton said:
I have a ZTE Avail 2 which I recently managed to root with Cydia Impactor. Afterwards I managed to screw it up by removing too many stock apps with Titanium. I did it carefully, one by one, and for a few days everything seemed to work fine. But then apps started force-closing, '<name of app here> has stopped working', etc. Factory reset doesnt help, it just restores me to the same screwed up state I'm in now. I already know why, it's because I removed some of the stock apps, which I now realize it needs. I'm currently stuck on the AT&T logo when powering on, it never gets any further. But even while it was messed up it was still halfway-operable, and now this. This device's subforum on Android Forums is all but non-existent, and XDA doesnt seem to have anything for it.
What I need is a 100% stock ROM (pre-rooted if possible) that I can flash, along with instructions on how to flash it. I have some experience flashing ASUS devices and Samsung devices, mainly the Transformer pad, and the Note 2, but have also rooted miscellaneous other devices in the past without alot of issues. But I have no experience with ZTE. I've already checked the manaufacturer's website for some kind of recovery software I can use to restore it, there doesnt seem to be anything.
Thanks for any help!
Click to expand...
Click to collapse
Just out of curiosity you ever figure out a solution? I have the AIO branded version of it.
drago10029 said:
Just out of curiosity you ever figure out a solution? I have the AIO branded version of it.
Click to expand...
Click to collapse
If needed, I could back up my /system folder and send it to you.
Simba.7 said:
If needed, I could back up my /system folder and send it to you.
Click to expand...
Click to collapse
it's alright man. someone on android forums has already made a custom ROM. so the ball is rolling on out weak old device :laugh:
build.prop?
Simba.7 said:
If needed, I could back up my /system folder and send it to you.
Click to expand...
Click to collapse
did you ever get around to doing this? there is supposedly a stock image on androidforums but when I opened the Zip, all it had was the stock apps, no build.prop, which I think I blew away with xblast (xposed plugin). now I hang on the boot screen image. there is a stock Rom for the z993 our there, which I suppose I could use, because they are supposed to be the same phone, just different carriers... but then I need to get the at&t apn's and it is just a PITA. so if you could post /system backup or just a stock build.prop, that would be great!
(I'd post links to these rooms but I guess I'm too new of a member... I can provide them if needed.)
I'm way late on this, but just thought I'd post to say that I no longer have the device, and I was never able to fix it.In any case, I hope the rest of you guys get it fixed. It seemed to be a halfway decent phone, although a bit sluggish at times. But beyond that, with all the bloat removed, I'd say it ran pretty well for the duration of time that I had it (less than a month). I currently have a GNote 3 (T-Mobile) and a GNote Pro 12.2" now and it's just awesome, I'm really loving them.
Sorry, accidental double-post (can't figure out how to delete this post, the "Edit/Delete" button doesnt appear to have any option to entirely delete a post).
Just like "AnonVendetta83" messed up using Titanium.
Now desperately looking for Stock ROM or any working custom ROM to bring phone back to life.:crying:
alirezayami said:
Just like "AnonVendetta83" messed up using Titanium.
Now desperately looking for Stock ROM or any working custom ROM to bring phone back to life.:crying:
Click to expand...
Click to collapse
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
AlexZap said:
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
Click to expand...
Click to collapse
Thank you so very much Alex
I was wondering if I can just simply place the rom zip on the root of your sdcard and continue without doing "Install CWM - ZTE Prelude (Z993) Root&Recovery" step???
Honestly I have absolutely no idea how to do CWM steps as they come so complicated to me.
alirezayami said:
Thank you so very much Alex
I was wondering if I can just simply place the rom zip on the root of your sdcard and continue without doing "Install CWM - ZTE Prelude (Z993) Root&Recovery" step???
Honestly I have absolutely no idea how to do CWM steps as they come so complicated to me.
Click to expand...
Click to collapse
You need to install the custom recovery... It is the only way to install the zip file. If you just have the zip and go into the stock recovery I don't think you can select which zip to install
Sent from my N9002 using XDA Premium 4 mobile app
AlexZap said:
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
Click to expand...
Click to collapse
AlexZap said:
You need to install the custom recovery... It is the only way to install the zip file. If you just have the zip and go into the stock recovery I don't think you can select which zip to install
Sent from my N9002 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thnx Alex
I would highly appreciate if anyone tell me what ADB Driver I should use for ZTE Z992. I almost understood all the procedure in the links but now the problem is despite I tried different ADB Drivers, but still ADB reboot-bootloader boots phone again in Normal bootloader.
Also Fastboot devices command does not see the phone, while ADB Devices command see it.
Seems bootloader is locked. Right? What should I do?
This is the method I used when I rooted my avail2 :
http://androidforums.com/zte-avail-2-zte-prelude/821217-how-root-zte-avail-2-z992-guide.html
The author (and I) just used the included drivers from zte that come with the phone. From what I remember, fastboot worked fine. Just hold the volume down button then turn the phone on. It will seem to lock on the start screen, but this is the bootloader. Then connect your cable and try your fastboot commands.
If you are already rooted, you can just download the package here
http://androidforums.com/prelude-all-things-root/797487-cwm-recovery-installer-zte-prelude.html
And skip the middle section, using the impactor to root (13 and 14).
Depending on what's wrong with your phone, you could also try just using the stock recovery and doing a system reset there. It will wipe any bad custom settings, but if the rom is still viable it might get you up and running again. It got me out of a bootloop without re-romming the whole thing. And with titanium backup or system app mover you can reinstall anything you need in the system partition.
*edit - Damn kindle auto correct
Sent from my KFTHWI using Tapatalk
A bit to much fiddling resulted in disaster
Hello XDA forum users,
I'm about ready to toss this phone in the trash. I have an AT&T Avail 2 with model number z992, which is apparently manufactured by a company called ZTE. First I think it would be helpful to explain what I've done to the phone and perhaps others out there can tell me if I've destroyed the phone or if it can be fixed.
A friend of mine sold me the phone for 10 bucks, its in great condition which is why its such a shame that it seems perma-bricked. I have no need for the phone aspect of the device, I simply wanted to "convert" it to a handheld media/application player, like an ipod or tablet for example. The phone comes with several bundled software applications that I find completely useless and wanted them removed, EX. AT&T Navigator and other AT&T software, plus a bunch of google applications.
The first thing I did when I decided to try and customize it was to use Kango's root tool which worked and rooted the phone. I was all excited that it worked and continued by installing the Super User application which allowed me to gain full control over the device. (I should have stopped there.) After the successful phone root I then installed a 3rd party app called NoBloat and used its uninstall options to remove a lot of stuff. I couldn't tell you exactly what all was removed but looking back, it must have been more important than I realized at the time. I know I took out all the AT&T software, then all the Google stuff to, which destroyed the play store. I didn't take out anything that seemed like a system file but apparently the Google stuff is the system files. The phone still worked in this state but it was erratic and things like Contacts would crash even if it was not running. So I considered that a failed attempt and commenced to do a factory reset using the recovery menu (Vol Up + Menu Key + Power button) but the factory reset didn't work, well not like it was supposed to. I had used the restore option before and it made the phone work like it was brand new. Now when the phone is powered on it will boot to the initial setup and ask me to choose a language, then it will get as far as the wireless connection screen (sometime not even that far) and the phone reports that "Unfortunately, Setup Wizard has stopped." and then I tap OK and the setup wizard restarts at the language screen. This is the state it is in now and I do not know how to fix it, I'm beginning to think there currently is no method to fix this.
Things I've tried so far include installing minimal ADB-Fastboot to try and sideload various ROM images, the ones I found here and other places. The phone is not recognized by Windows 7 though and the ADB does not work like it did on a motorola phone I did this to before. I've also purchased an inexpensive 8GB microSD chip with an adapter so I could put the ROM info on that and tried the "Update from external storage option" and that seems like it would work but none of the ROM's I've used will install. I guess because there is some kind of security feature built into the phones hardware which checks the data files for specific tags/sizes and therefore won't accept any of the ROMS I've tried.
There is no means to access the old file system anymore like most guides show, I do not have any CWM's installed nor any backup data whatsoever. It's been reset and now it seems the data it used to restore itself is, while not completely missing, damaged and will not reload anymore. All the guides I've read or watched usually show the user in the operating system or using software on a PC to type out commands. None of that works on this phone though, the phone as I just described it is basically bricked. Is there anything that can fix this, or is the phone a paper weight now? A functional ROM image from AT&T seems unlikely as they have absolutely no relevant information about this on the commercial website and the help and support seems like it's setup for old people who don't understand technology at all. If anyone out there has experience with issues like this then by all means let me know. If more information is necessary then I will be glad to provide it if available.
Alright I did manage to figure out how to make the computer see the phone as an ADB device and the minimal ADB interface shows the device now when I type ADB devices at the command prompt. Though this ADB thing seems irrelevant considering I can do the same thing by using the SD card adapter. So I don't know if this was useful or not. The ADB prompt shows a device number of P752A15.
Before I was unable to make the device show up at all in the ADB list. The problem now is how to make the phone accept a ROM, at this point I don't even care if the ROM is the default factory ROM or some random ROM made by a devoted user. The issue I encounter each time is that the built in recovery option to restore from an SD card will not accept the ROM's I've tried so far, and my research on this seems to indicate that I need a custom recovery option. This is apparently called the ClockWorkMod but as to how I install that without a functional operating system on the device is a mystery still. I've tried using a file called recovery.zip and but it does not show up when I view the contents of the SD card when the card is in the phone.
I feel like an idiot because I've done this to other phones for my family and friends, you know jailbreaking an iPhone, and rooted a Galaxy S3 once but this phone seems like its not going to be as easy as those others. I guess AT&T made sure that if you alter it, it breaks the phone. I'll check back later and see if anyone has dropped a line or two here in response to my inquiry.
Thank you and have good day.
Britton Burton said:
Alright I did manage to figure out how to make the computer see the phone as an ADB device and the minimal ADB interface shows the device now when I type ADB devices at the command prompt. Though this ADB thing seems irrelevant considering I can do the same thing by using the SD card adapter. So I don't know if this was useful or not. The ADB prompt shows a device number of P752A15.
Before I was unable to make the device show up at all in the ADB list. The problem now is how to make the phone accept a ROM, at this point I don't even care if the ROM is the default factory ROM or some random ROM made by a devoted user. The issue I encounter each time is that the built in recovery option to restore from an SD card will not accept the ROM's I've tried so far, and my research on this seems to indicate that I need a custom recovery option. This is apparently called the ClockWorkMod but as to how I install that without a functional operating system on the device is a mystery still. I've tried using a file called recovery.zip and but it does not show up when I view the contents of the SD card when the card is in the phone.
I feel like an idiot because I've done this to other phones for my family and friends, you know jailbreaking an iPhone, and rooted a Galaxy S3 once but this phone seems like its not going to be as easy as those others. I guess AT&T made sure that if you alter it, it breaks the phone. I'll check back later and see if anyone has dropped a line or two here in response to my inquiry.
Thank you and have good day.
Click to expand...
Click to collapse
Ok, been a while since I've used this phone, but hopefully this will help. I assume you have the kaw202_recoveryflasher.zip file. Once you extract it, look for the .img file. Try running these adb commands
adb.exe push cwm-z993.img /cache
adb.exe shell "su -c 'dd if=/cache/cwm-z993.img of=/dev/block/mmcblk0p17'
This should flash cwm if your phone is rooted and adb shell is working.
Sent from my KFTHWI using XDA Premium 4 mobile app
AlexZap said:
Ok, been a while since I've used this phone, but hopefully this will help. I assume you have the kaw202_recoveryflasher.zip file. Once you extract it, look for the .img file. Try running these adb commandsp
Click to expand...
Click to collapse
I have not come across that particular file yet, I did try to google it and the only results it had were two and one of those was this post. Would you mind telling me where I might find a copy of the kaw202_recoverflasher.zip?
I managed to find the zip you were talking about and have downloaded it, for anyone else looking for it. I am unable to post links but I would have linked to the files you mentioned. For others looking for the same zip file search for "CWM Recovery Installer ZTE PRELUDE". That's the title of the thread I found the file on that Alex mentioned above. The instructions on the page don't seem like they apply to the situation I'm stuck in but I'll give it a whirl anyway and see if the files work.
If this forum is like the others I've read through so far then there is no real answer to the issue. The phone seems kind of new and not many of the power users on these forums use rinky dink phones like this one. You guys all have the 600 dollar models I guess. What bugs me about this this phone and the state I managed to put it in, is that the damn thing was programmed the first time when it was made. So it seems to me like there should be a way to reprogram the phone the same way the factory did it. Think about it, when they make the phones they don't have any information on the phone at all. It's completely empty, so there must be a way to load the software for the phone even if the phone has no data at all in the main storage. If the files in the recovery flasher.zip file work then I'll post back the results but if it's like the other files I've messed around with (which didn't do anything) then I'm throwing it in the trash can.
Anyway thanks for your response and for pointing me in a different direction Alex
---------- Post added at 09:15 PM ---------- Previous post was at 08:39 PM ----------
HELL YEAH!!! It worked thank you Alex,
I would have never figured this out without your help! The phone now has a version of CWM on it and the recovery menu is different. I just tried to install a ROM and it said successful. After the phone rebooted went back to the setup screen from ZTE but it still did the same thing. However this is progress and I should be able to "wander in the dark" and figure out a way to use the CWM to install a completely new rom. Any recommendations on a ROM to use for the z992?
Good news, I was able to fix it using the information Alex guided me to find. Since there doesn't appear to be a stock AT&T version of the ROM I ended up using the Azazel ROM. Which at first failed even though it was installed, this I determined was due to the old ROM image still being partially active on the system partition. So I formatted the system partition to and tried again. This time it worked and the phone seems fully functional again, and best of all the annoying bloatware is not present and the apps are not crashing. I consider this issue resolved. Thank you again Alex I will be sure to leave a thanks on your post.
Britton Burton said:
Good news, I was able to fix it using the information Alex guided me to find. Since there doesn't appear to be a stock AT&T version of the ROM I ended up using the Azazel ROM. Which at first failed even though it was installed, this I determined was due to the old ROM image still being partially active on the system partition. So I formatted the system partition to and tried again. This time it worked and the phone seems fully functional again, and best of all the annoying bloatware is not present and the apps are not crashing. I consider this issue resolved. Thank you again Alex I will be sure to leave a thanks on your post.
Click to expand...
Click to collapse
ze
Glad I could help, but none of the work was done by me, the guys over at android central did all the heavy lifting, I just pointed you in the right direction. I have a stock system e m image around here somewhere if you need it, tho installation will be a bit more complicated. If azazels rom ever gives you issues, ill dig it up and try and help you install it.
Sent from my KFTHWI using XDA Premium 4 mobile app
Alright XDA Community. I need some help. Desperately. So I had plans on rooting my tablet (TF201) to install a custom ROM. Being that I have version 4.1.1 installed I would looking for something a little newer and modern. That did not go as planned from the beginning. Since the first step was rooting it, I looked for a ROM. So I searched the web, including XDA and found KingRoot to root my device. Either KingRoot was a terrible choice or something did not go right with the process. Now when I turn on my device I get random pop ups for for stupid garbage that I don't want installed like What's App and UC News. Everything functions as it should but I get random messages that Settings stopped working. I get random apps being installed on a regular basis. I could be in an app and I get a blank / black box on top of something trying to open or install. This very frustrating and I am completely over my head now. So here is what I would love help with;
1. I would like to UNROOT my device to ALL stock settings and firmware. Completed
2. I would like to ROOT my device PROPERLY. Completed
3. I would like to install a custom ROM with Android 6.x or 7.x (Something plain and vanilla)
4. I would LOVE this help if at all possible in plain English Step by Step with pictures if possible. I would like it dummy proof.
Thank you very much for any and all help. It will be very much appreciated.
PS. I do not need to back anything up. It was a fresh reset recently and I do not have anything to backup.
Step 1 is complete. I used Kingo Root to UNROOT my device.
Step 2 is complete. I used Kingo Root to ROOT my device.
Have you unlocked the bootloader using the Asus supplied software?
NP
No. I downloaded it and installed it but when I go to run the APP it asks for my Google Credentials but it does not accept them. I use the credentials every day so I know my username and password but it does not work.
Delete you google account then run the bootloader unlocker again.
NP
Nektopoli said:
Delete you google account then run the bootloader unlocker again.
NP
Click to expand...
Click to collapse
Thank you very much. That did the trick. Here is the problem though. I think I am way over my head on this. I did a Davlik Wipe and a Factory Reset but there is something still not right. I did both a Dalvik wipe and Factory reset last night before bed. I did not touch it once complete but on a regular basis I get pop ups about Android System stopped working or UC News. I cannot get rid of either of these on my tablet.
Any idea what I can do?
Now that you have the BOOTLOADER unlocked next step is to ROOT the TF201, I used MOTOCHOPPER. Check out this thread;
https://forum.xda-developers.com/showthread.php?t=2230763
NP
That worked. I was able to Root my device without issue. Actually that was a great tool. Nice and easy to work with.
So here is my next stop. What ROM do I pick? I was looking at 6.x or 7. It looks like KatKiss is pretty good but I am not sure.
https://forum.xda-developers.com/transformer-prime/development/rom-katkiss-nougat-t3459313
No reason not to go straight to 7.1.2 just make sure you flash the correct TWRP.
NP
And this is the part I don't understand. I have downloaded TWRP and ROM Manager from ClockWork. I have copied the ZIP folder to my SD card and placed it in my TF201. From here I don't know what to do.
I follow the instruction from 5.1 here: https://forum.xda-developers.com/transformer-prime/development/rom-katkiss-5-1-tf201-22-t3080892
using the 7.1 files from here: https://forum.xda-developers.com/transformer-prime/development/rom-katkiss-nougat-t3459313
NP
Yeah. So now the tablet is stuck at the Asus Splash Screen. Been for the last 48 hours or so. I completely drained the battery but when I filled it back up, no difference.
Can you get into the TWRP recovery console?
NP
Nope. I can't do anything with it. I have power cycled it many times over holding different buttons but no difference.