Related
Hey, could someone please send me a link and explain to me how to install the TouchFLo on my MOGUL? It would be greatly appreciated. Thanks
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
kidnamedAlbert said:
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
Click to expand...
Click to collapse
Thanks a lot! What extra does the cube add? Thanks
kidnamedAlbert said:
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
Click to expand...
Click to collapse
Oh...sorry 1 more thing, once you download them onto your mogul what do you have to do to get them to work because I have tried something similar before and the files are on my MOGUL but nothing changed in apearance? Thanks again
Tutorial:
1. place ftouchflo.cab and ftouchflo_config.cab to device.
2. run the two files to install them.
3. download slither's cube and et the folder and put it into the "Aplication Data" folder
4. folow the steps above then watch this video:
kidnamedAlbert said:
Tutorial:
1. place ftouchflo.cab and ftouchflo_config.cab to device.
2. run the two files to install them.
3. download slither's cube and et the folder and put it into the "Aplication Data" folder
4. folow the steps above then watch this video:
Click to expand...
Click to collapse
thanks for the help
no problem
on that video it shows everything being saved to the memory card. How do you do that? because it always just automatically saves all my programs to the main memory? In that video, what is it even doing? Everything is going so fast I can hardly tell what is going on. Thanks
I just tried everything you said and followed that video and it doesn't seem to work. Everything still looks the exact same. If I go from the bottom to the top of the screen with my finger or stylus the program comes up but only after an error comes up that say ERROR RADING FILE and then it says an error message cannot be displayed because an optional resource assembly containing it cannot be found. I click OK and the program opens but then when i try to start assigning things it wont let me save because the same error come sup. I transferred all three using activesync and extracted the files CUBE(SCLP) download and then disconnected, went to my MOGUL and installed everything and then followed the steps on that video. The today screen never changed its appearance. I tried a restart and everything. Does anybody have any ideas???????? THANKS
does anyone have anymore info? Thanks
dcshoeco024 said:
I just tried everything you said and followed that video and it doesn't seem to work. Everything still looks the exact same. If I go from the bottom to the top of the screen with my finger or stylus the program comes up but only after an error comes up that say ERROR RADING FILE and then it says an error message cannot be displayed because an optional resource assembly containing it cannot be found. I click OK and the program opens but then when i try to start assigning things it wont let me save because the same error come sup. I transferred all three using activesync and extracted the files CUBE(SCLP) download and then disconnected, went to my MOGUL and installed everything and then followed the steps on that video. The today screen never changed its appearance. I tried a restart and everything. Does anybody have any ideas???????? THANKS
Click to expand...
Click to collapse
did you put the cube files in application data? thats they only way itll work
yea i put them there
this may sound stupid but did you enable touchflo?
what do u mean enable? Like, i downloaded it and it said that it was running.......
I really like Poorlyduck Vista cube
For me a stop having probleme with the WM 6.1 and cube when installing vista-cube .cab that also contain touch flo. I run and older version tha the one ''Vista suite'' I tried hard to make this in OEM package to include in option in DCD kitchen taht i customized a bit but for now i run it from cab version. ...
ok so i followed the instructions and set it up just like the vid, went back to the today screen and no different home screen. I went to choose touch flo, and it pops up as already running. Can someone help me please
I did this basic setup for my woot acquired GTAB. The primary reason was to keep the stock ROM but get the fully functional Android Market. I wanted to give these instructions out to real newbies who may want to do the bare minimum to keep their TAB up and running with all apps and without doing a flash with custom ROM. I wanted to include a more step by step for people who are less tech savvy so please bear with the details if you are a tech guy.
1. Get the Over The Air update to update to 3588. The OTA push happens automatically if you have connectivity (wifi is setup). You can also check it via the updates app that should have come with the stock ROM.
2. Download the enhancement pack - TnT Enhancement Pack v3.1.4b file from http://www.megaupload.com/?d=74HGJNEL to your desktop or laptop. The file name should be TnT_Enhancement_3389_v3_1_4b.rar
3. Try opening the file using winzip or any zip program. If it doesn't install winrar version available at http://www.win-rar.com/download.html.
4. Extract contents to a local folder on your computer using the zip/ winrar program. It has files update.zip, a recover folder that contains a command file
5. Connect your TAB to the computer with the min-usb cable and activate the usb transfer (I think it comes up with that option)
6. GTAB should show up as another drive in your system. With windows explorer browse this drive to locate the "sdcard" folder.
7. Copy the update.zip and recover (containing command file) folder from the location you extracted on your computer (step 4) into the sdcard folder identified on step 6.
8. Power off
9. Power on by pressing and holding the volume + button and the power button simultaneously.
10. The TAB should show a open box screen in a few seconds and after some time should turn back on to the main screen with new apps installed. You should see the market apps icon as well
11. Do the market fix remedy to see all applications in the market by steps below. I added an alternate market fix (if you don't see all apps)
a) Run market
b) Open settings->applications->system applications
c) Force close Google Services Framework, then Force Close Market
d Go back to Google Services Framework, then clear data
e) Run market and confirm you get an error
f) Reboot
g) Wait 2 minutes and try Market to get all applications
h) If this doesn't work, look at the directions again and make sure you follow them exactly
Alternate market fix Steps - I haven't tested this but looks like a few extra steps (You need Titanium Backup installed and have opened Market and surfed around a bit. Thanks to blackjaguar who pointed to this)
1. Settings->Applications->System applications->Market then Clear Cache (if any) then Force Stop
2. Go back one and then Google Services Framework then clear data then Force Stop
3. Go to home and open Titanium Backup
4. Select Backup/Restore tab
5. Select Google Services Framework
6. Select Wipe Data
7. Go to home and open market (it will error and close)
8. Reboot your tablet
9. Open Market and you will have full market
The above steps are detailed in another thread
The below steps are the bare action items from this detailed link
http://forum.xda-developers.com/showthread.php?t=885940 _ However I found it misses some things for the newbie. So this thread.
CAVEAT - I am still new to all this and this is my first HOWTO. Use at your own risk .
Thanks to all the hard working Devs at XDA especially Roebeet and rothnic. A lot of work has gone in creating these files.
Almost
I just got my gtab from woot and basically wanted the same thing you did: the stock gtab plus the market. I followed your directions after spending the last week reading the massive amounts of posts on this forum. The only thing I did differently was installing CWM between steps 1 and 2, and repartitioning to the recommended 2048/0. It seemed like most people end up having to do that at some point. Your market fix however, didn't work at all for me. There's another fix posted by tsm26 that worked great for me. Its slightly different:
http://forum.xda-developers.com/showpost.php?p=12563333&postcount=4400
The only app I still can't find in the market is Firefox, but luckily its available from ftp.mozilla.org.
EDIT: Just got the acore process problem, and had no contacts or /data/data folder at all. Used this fix and the problem is gone. Looks like it works for TnT Enhanced as well:
hipBob said:
from other parts of the forum i went with the fix of using titanium backup to wipe data related to contacts (believe there were three separate items, contacts, contact synch, and something else). btw, I am running VEGAn 5.1.1.
Click to expand...
Click to collapse
blackjaguar said:
I just got my gtab from woot and basically wanted the same thing you did: the stock gtab plus the market. I followed your directions after spending the last week reading the massive amounts of posts on this forum. The only thing I did differently was installing CWM between steps 1 and 2, and repartitioning to the recommended 2048/0. It seemed like most people end up having to do that at some point. Your market fix however, didn't work at all for me. There's another fix posted by tsm26 that worked great for me. Its slightly different:
http://forum.xda-developers.com/showpost.php?p=12563333&postcount=4400
The only app I still can't find in the market is Firefox, but luckily its available from ftp.mozilla.org.
EDIT: Just got the acore process problem, and had no contacts or /data/data folder at all. Used this fix and the problem is gone. Looks like it works for TnT Enhanced as well:
Click to expand...
Click to collapse
I am going to update this with alternate market fix for anyone who is interested. Thanks.
Step 6 confused?
Just received my gtab and following your steps to install this upgrade, however after connecting gtab to laptop I see 4 folders at the root of "E:" when browsing through windows. I assume that "E:" is the sdcard directory and these folders are located in it. The folders I can see in this directory under the windows "E:" drive are - .android_secure, Android, DCIM & LOST.DIR. However if I browse to the "sdcard" folder using the file explorer on my gtab I don't see the .android_secure folder, but do see a folder called "update.zip", that I don't see when browsing the "E:" drive in windows. Now I am really confused? Do I delete or rename the "update.zip" directory currently residing in the "sdcard" directory on the gtab and then copy over the recover and update.zip folders that I just downloaded?
My tap ui version is 1.1-3389.
Are there any suggestions?
I think you need to disable the USB sharing and you will see the files.
This worked like a charm. I decided not to root and mod, at least for now, so getting the market is great. I didn't show the sdcard directory, but I had update and an empty recovery directory, so I just replaced them (after copying the old update.zip). It wiped out the photos and videos apps on my main screen, but I found some interesting replacements. And the market fix worked great too.
But I still can't find Words With Friends... Just checked the market from my laptop and it thinks it's not compatible with my device. Oh well.
I followed the instructions to the T and the market wont work... someone please help!!!!!
The first set of instructions did not work for me, but the alternate set did work. I now appear to have a full market. Awesome!
Just for the record, I am running the stock ROM updated to the latest VS release.
EDIT: Whoops, spoke too soon. No apps will download from the Market. When I try to download a free app, I get a "Starting download..." message but that's it. I'm also doing this at work... I think port 5228 might be blocked. Is this the reason? I will attempt from home tonight...
Help!
gunajay said:
10. The TAB should show a open box screen in a few seconds and after some time should turn back on to the main screen with new apps installed. You should see the market apps icon as well
Click to expand...
Click to collapse
I've gotten to this point, but how long is some time, it has never turned back on to the main screen and now really won't boot at all, just goes to a blank screen and sit there.
Any ideas? Any help would be appreciated! Hope I haven't done something terribly wrong!
Spoke too soon?
Maybe I spoke too soon. Doing the market fix got me a lot more on the market, but there's still a lot of apps that I can't get. So many devs put their apps in market and nowhere else. Don't they realize that this is not itunes? (BTW, I've hit web sites that send me to itunes to download their apps...) How many other devices has google not approved for the market and are stuck like this? Even Firefox is undownloadable on my Android. Is that really the market fix or should I be able to access more?
So frustrating, but finally something seems to work
OK, new theory. Apparently I had to do the market fix twice. I also followed the video on this post:
http://forum.xda-developers.com/showpost.php?p=9817939&postcount=17
That's not the gtab, so it looks a little different in the menus, but the steps still worked. I guess it threw in an extra step of clearing cache on market and force stopping it before stopping google services framework. Well, Firefox doesn't show up in market, but so far everything else does. Now I have to try to remember everything I've been trying to download.
I had to do the Market fix twice, but that was no sweat.
Perfect, gunajay; thank you very much for your concise directions.
gunajay said:
I did this basic setup for my woot acquired GTAB. The primary reason was to keep the stock ROM but get the fully functional Android Market. I wanted to give these instructions out to real newbies who may want to do the bare minimum to keep their TAB up and running with all apps and without doing a flash with custom ROM. I wanted to include a more step by step for people who are less tech savvy so please bear with the details if you are a tech guy.
1. Get the Over The Air update to update to 3588. The OTA push happens automatically if you have connectivity (wifi is setup). You can also check it via the updates app that should have come with the stock ROM.
2. Download the enhancement pack - TnT Enhancement Pack v3.1.4b file from http://www.megaupload.com/?d=74HGJNEL to your desktop or laptop. The file name should be TnT_Enhancement_3389_v3_1_4b.rar
3. Try opening the file using winzip or any zip program. If it doesn't install winrar version available at http://www.win-rar.com/download.html.
4. Extract contents to a local folder on your computer using the zip/ winrar program. It has files update.zip, a recover folder that contains a command file
5. Connect your TAB to the computer with the min-usb cable and activate the usb transfer (I think it comes up with that option)
6. GTAB should show up as another drive in your system. With windows explorer browse this drive to locate the "sdcard" folder.
7. Copy the update.zip and recover (containing command file) folder from the location you extracted on your computer (step 4) into the sdcard folder identified on step 6.
8. Power off
9. Power on by pressing and holding the volume + button and the power button simultaneously.
10. The TAB should show a open box screen in a few seconds and after some time should turn back on to the main screen with new apps installed. You should see the market apps icon as well
11. Do the market fix remedy to see all applications in the market by steps below. I added an alternate market fix (if you don't see all apps)
a) Run market
b) Open settings->applications->system applications
c) Force close Google Services Framework, then Force Close Market
d Go back to Google Services Framework, then clear data
e) Run market and confirm you get an error
f) Reboot
g) Wait 2 minutes and try Market to get all applications
h) If this doesn't work, look at the directions again and make sure you follow them exactly
Alternate market fix Steps - I haven't tested this but looks like a few extra steps (You need Titanium Backup installed and have opened Market and surfed around a bit. Thanks to blackjaguar who pointed to this)
1. Settings->Applications->System applications->Market then Clear Cache (if any) then Force Stop
2. Go back one and then Google Services Framework then clear data then Force Stop
3. Go to home and open Titanium Backup
4. Select Backup/Restore tab
5. Select Google Services Framework
6. Select Wipe Data
7. Go to home and open market (it will error and close)
8. Reboot your tablet
9. Open Market and you will have full market
The above steps are detailed in another thread
The below steps are the bare action items from this detailed link
http://forum.xda-developers.com/showthread.php?t=885940 _ However I found it misses some things for the newbie. So this thread.
CAVEAT - I am still new to all this and this is my first HOWTO. Use at your own risk .
Thanks to all the hard working Devs at XDA especially Roebeet and rothnic. A lot of work has gone in creating these files.
Click to expand...
Click to collapse
Everything is working great using this Enhancement Pack and Market Fix. My question is whether my gTab is still considered stock with these changes? The forum messages about the new firmware update all caution against applying it if you are running an alternate firmware from 3588. I don't know if I am under the Enhancement Pack and Market Fix scenario or not.
no sdcard - help please
Hello all, found this post and as a complete newbie I was excited to see what the GTAB could be transformed into. Not quite ready for custom ROMS so I figured I'd start with Clockworkmod and trying to install the standard android market.
Problem is when I hook up my gtab I don't see an "sdcard" folder... Anybody have any ideas why that would be? How do I work around it?
I have the following folders:
.android_secure
Android
clockworkmod
DCIM
download
kindle
LOST.DIR
Master
Music
Photos
recovery
Videos
update.rar
Thanks in advance for your help!
Will this work with 4349?
Does anyone know if gunajay's instructions will work with with Stock 4349 and Market?
andasolo33 said:
Hello all, found this post and as a complete newbie I was excited to see what the GTAB could be transformed into. Not quite ready for custom ROMS so I figured I'd start with Clockworkmod and trying to install the standard android market.
Problem is when I hook up my gtab I don't see an "sdcard" folder... Anybody have any ideas why that would be? How do I work around it?
I have the following folders:
.android_secure
Android
clockworkmod
DCIM
download
kindle
LOST.DIR
Master
Music
Photos
recovery
Videos
update.rar
Thanks in advance for your help!
Click to expand...
Click to collapse
SDCARD is the folder that is mounted on your computer when you connect via USB. The list above are the contents of your SDCARD.
Doh. ;-) That worked. Thank you very much for the explanation K J Rad!
Does anyone know how to stop the Auto-Run prompt to install drivers whenever you connect a Rezound to a PC? I've already attempted to install the drivers several times. The first time, after installing, the app said I needed to subscribe to additional VZW services, which I declined. But, I was still prompted again. Every subsequent time I allowed the install to run, the installer would hang at some point.
Down load HTC SYNC from the net to your pc and install it on your pc. After installation, uninstall HTC SYNC from the pc. The drivers will be left behind and your pc will stop asking.
Sent from my ADR6425LVW using xda premium
I have HTC Sync on my computer now, and I use it. Won't removing it prevent me from sync'ing Outlook with my Rezound?
It is that Verizon virtual drive that pops up in addition to the HTC Storage drive (Internal phone "SD" memory) and the SD Card (External SD Card memory.)
Most every custom ROM around here deletes that thing as part of eliminating Verizon's bloatware; I would suggest deleting the files inside the virtual drive and see if that helps prevent any Autorun of the files. There is probably a tool or guide around here for removing that on the stock ROM.
Edit: Nevermind this technique, as OP said it is a disc image and files cannot be deleted as such.
Go in and rename cdrom.iso I believe it is to .bak, the problem will stop.
There are posts about it, I did it so long ago, one of the first things I did when we got root.
Sent from my ADR6425LVW using Tapatalk 2
Because it's setup like a CD-ROM, you cannot simply delete the files, nor can you rename or edit them. I would've simple renamed or edited the Autorun.inf had it been that simple.
Where might one find that .ISO you referred to? I tried looking at the internal and external "storage" spots, but to no avail. This stuff is so irritating; if I don't dismiss that window every time, my CPU on my PC goes into overdrive, kind of like when you leave a dialog box open without answering it.
xv-6800 said:
Because it's setup like a CD-ROM, you cannot simply delete the files, nor can you rename or edit them. I would've simple renamed or edited the Autorun.inf had it been that simple.
Where might one find that .ISO you referred to? I tried looking at the internal and external "storage" spots, but to no avail. This stuff is so irritating; if I don't dismiss that window every time, my CPU on my PC goes into overdrive, kind of like when you leave a dialog box open without answering it.
Click to expand...
Click to collapse
The file is located at \system\etc\cdrom.iso from root; you can't access that normally so you will need to be rooted in order to delete it manually. There was a bloatware tool that used a temp root exploit on the original firmware of the phone, but the OTA update broke that temp root method. Since the OTA, you must unlock the bootloader to obtain root access.
Assuming you may not want to root your phone just yet around here, so this may be worth a shot. It is a workaround if you are on Windows 7, culled this from a web search so I can't vouch for it, but with that said:
1. Installed the VZ Media Manager. After installation, ran the program once and cancelled all of the updates etc. that it wants to do.
As soon as you plug in the phone, it tries to start the media manager program with verizon.exe but no longer goes to the web site telling you to install the software.
2. Renamed C:\Program Files\Verizon V CAST Media Manager\verizon.exe to verizon.exx
3. Used a scripting program to create a new .exe file named verizon.exe that does nothing but a meaningless set command. ("set noverizon=") and put the .exe file in the programs folder shown above.
Now when I plug in the phone, nothing happens except the Windows run option box comes up - no prompts for anything Verizon. The verizon.exe program still runs, but it does nothing and you never see it.
You could always rename verizon.exe verizon2.exe if you really want to ever run the program.
Click to expand...
Click to collapse
Edit, also this:
Just tried this and it seems to be resolving my issues with the popup. However I installed the VMM (Verizon Media Manager) Mode Selector but had not installed vcast yet. Use [Windows Key] + R to invoke the Run dialog. Type in "msconfig" and hit enter. Select the Startup tab. Find the VMM Mode Selector entry and unclick it.
Click to expand...
Click to collapse
Option 1 sound like the smart way to go. Problem is, for me, the program does not install to begin with, so I have no such folder on my C: drive. I even checked my installed programs in Control Panel to be sure. What a PITA!
On another note, looks like I now have even bigger fish to fry. See here:
http://forum.xda-developers.com/showthread.php?p=27850700#post27850700
What really sucks is that I finally resolved all my multiple e-mail account issues, and everything, only to find I will now have to setup a new phone all over again!
Ok, so I rooted the Huawei Ascend Y300, and with my new-found power i for some reason decided it was a good idea to delete the system UI...
So now the screen is just black, I can't access anything and it keeps coming up with "systemUI has stopped responding".
I tried downloading Huawei's official firmware from their website, and flashed the device, but whilst installing it said "update error" and wouldn't install it.
Any ideas on what I can do? Or have I broken it for good?
You have activated USB Debugging? If so, you need Android SDK, and the missing file (unpack the official firmware to find it), so you can copy it using adb (included in the Android SDK, tell me if you need more detailed info).
RoberGalarga said:
You have activated USB Debugging? If so, you need Android SDK, and the missing file (unpack the official firmware to find it), so you can copy it using adb (included in the Android SDK, tell me if you need more detailed info).
Click to expand...
Click to collapse
I had the USB Debugged, and just now i have sent nova launcher to the phone to get into it, but it's now telling me settings isn't installed and i cant access the task bar.
Also when i downloaded the pack from huawei, it just came with the file "UPDATE.APP"
Check if you can open the Update package using some program (winrar, 7zip), otherwise you'll need to search for the file.
RoberGalarga said:
Check if you can open the Update package using some program (winrar, 7zip), otherwise you'll need to search for the file.
Click to expand...
Click to collapse
Ok, so it won't let me open the file as a zip, and I'm not entirely sure what file I'm meant to be looking for. Am i looking for system UI because thats the one with the error? and if so how would i go around getting it on the device?
Do you know if theres a way to completely reinstall android onto the phone?
System UI file
Hey
Sorry to confuse you lol oxymoronic happens to be talking about my phone anyways we think we have the problem nearly sorted but we now need a system UI APK file for the OS and we can find one any chance you know where to get one?
I hope this helps someone with a similar issue as the post is old.. I had deleted my xperia ui sometime back so each time the phone booted , it went to black with "Ui has stopped'. I could swipe down and go to settings.. Since i had formatted the phone before that there was no account linked to it.. I added my gmail account and sent myself a mail with nova launcher prime as an attachment.. As soon as the phone notified me of my mail, i downloaded the nova launcher apk and installed it.. Works fine now..
Hope this helps..
I rooted my asus zenfone 5 and by mistake I uninstalled my system ui it came like that the system ui is not responding so I switched it of and factory reseted the phone and when I switched it on I can see a black screen and I cannot change my phone'sv wallpaper I cannot see the task bar or the status bar or the notification bar and I also cannot see my recent apps. WHAT TO DO NOW ???
My phone doesnt show and home button recent button and the notification shade
RoberGalarga said:
You have activated USB Debugging? If so, you need Android SDK, and the missing file (unpack the official firmware to find it), so you can copy it using adb (included in the Android SDK, tell me if you need more detailed info).
Click to expand...
Click to collapse
PLEASE HELP ME IM FREAKING OUT I accidently deleted SYSTEM UI and my wallpaper is black and the buttons on my lg leon wont show. PLEASE HELP ! HOW DO I SOLVE THIS?
Here's the solution. $$$ appreciated.
oXym0r0nic said:
Ok, so I rooted the Huawei Ascend Y300, and with my new-found power i for some reason decided it was a good idea to delete the system UI...
So now the screen is just black, I can't access anything and it keeps coming up with "systemUI has stopped responding".
I tried downloading Huawei's official firmware from their website, and flashed the device, but whilst installing it said "update error" and wouldn't install it.
Any ideas on what I can do? Or have I broken it for good?
Click to expand...
Click to collapse
I SOLVED IT *****! HERE'S HOW I DID [email protected]@@
I accidentally deleted com.android.systemui on my phone. Version KitKat 4.4.2.
STEP 1. HAVE AN EXACT DUPLICATE OF THE PHONE READY. HAVE THE SAME PHONE READY. LUCKILY I HAD ANOTHER PHONE OF THE SAME MODEL. GO TO A PHONE SHOP OR SOMETHING.
IT WILL HAVE THE SAME com.android.systemui .
STEP 2. INSTALL NOVA LAUNCHER OR SOME SORT OF LAUNCHER ON THE PHONE MISSING THE FILE, SO YOU CAN LOAD THE PHONE AND BE ABLE TO SEE IT!
STEP 3. INSTALL TITANIUM BACKUP ON BOTH PHONES. ROOT IT AND USB DEBUG IT BEFOREHAND.
STEP 4. ON THE BACK UP PHONE, OPEN UP TITANIUM BACKUP AND CLICK ON BACKUP/RESTORE ON THE UPPER TABS AND GO TO com.android.systemui. BACK THE **** UP THE FILE.
STEP 5. CONNECT IT TO THE COMPUTER, AND GO TO YOUR PHONE AND COPY WHAT'S INSIDE THE "TitaniumBackup" FOLDER.
STEP 6. CONNECT THE ****ED UP PHONE TO YOUR COMPUTER AND PASTE THE CONTENTS OF "TitaniumBackup" FOLDER (WHICH ARE com.android.systemui FILES) IN THE ****ED UP PHONE'S "TitanumBackup" FOLDER.
STEP 7. DISCONNECT EVERYTHING, EXIT OUT OF EVERYTHING, AND RESTART THE PHONES. GO TO YOUR ****ED UP PHONE, CLICK ON AND OPEN UP THE TITANIUM BACKUP, FIND com.android.systemui AND RESTORE IT!
STEP 8. ENJOY YOUR PHONE.
NOW YOU DON'T HAVE TO FORMAT IT , RESET IT, REINSTALL A FOREIGN ROM, OR DEBUG IT USING ADB OR SDK, AND ALL OTHER COMPLICATED **** FLOATING AROUND, RISKING LOSING ALL OF YOUR DATA. JUST GO A LITTLE CREATIVE.
IF IT WAS OF ANY HELP TO YOU OR YOU ACTUALLY RECOUPED YOUR DATA BECAUSE OF ME, AND YOUR PHONE DATA WAS OF ANY WORTH TO YOU, PROBABLY WORTH MORE THAN $100, PLEASE SEND ME SOME APPRECIATION PREFERRABLY OVER $100, TO MY PAYPAL. THE EMAIL ADDRESS IS [email protected]
Want the help
Thanks for the saw er
but can u plc attach the apk of Samsung galaxy core 2 here.so I could be able to install. Please
So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.
Hello Friend!! I also have the same problem with this phone. but I have not been able to enter the menu. as you could enter the menu of the z828? Thank you
Sent from my D6503 using Tapatalk
kazador07 said:
Hello Friend!! I also have the same problem with this phone. but I have not been able to enter the menu. as you could enter the menu of the z828? Thank you
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Yeah I'll make a short guide I can try to post screenshots later but for now i'll try my best to guide you to the point where I am.
1. Go through the setup until you get to the google verifying part.
2. Open up your keyboard and hold down the comma to access the gear which will allow you to get into the google keyboard settings.
3. Once you're at the google keyboard settings go to Text Correction.
4. Then go to Personal Dictionary and select English (US) or whatever you have there.
5. Then click on the search button and just type random letters and hit search is what i did to get to this next step.
6.. You should be able to type in the letter "g" and you should see something called google voice typing
7. click that and go to Text-to-speech.
8. Then click the blue gear next to google text to speech
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
14. delete whatever is on the search and type in settings the option to access the settings should pop up on the bottom as a suggestion.
15. click that and now you're at the settings.
From here on i assume you know how to access the about phone and turn on developer settings but this is the problem you can turn it on but you cant access the developer menu you can just click it and nothing will happen. same for trying to reset the phone from the back up and reset menu.
if anybody knows what the case may be please let me know i'm constantly trying to find the solution to this whenever i have the free time but so far no solution has came up. i am able to download apks by instead of typing in settings on the google search i type in file manager and simply transfer over the apk through my pc onto the phone. that i can do without usb debugging becasue my pc picks the phone up as a portable device.
I fixed the zte avid plus z828 frp problem!
Dont mean to double post but after a week of trial and error I solved the problem. I bypassed the FRP and Hard resetted the phone. Phone's working 100% now. I can probably post a guide somewhere I guess if highly requested.
Feel free to close the thread as the problem is solved
~
please do!!!!
Yerhope said:
Dont mean to double post but after a week of trial and error I solved the problem. I bypassed the FRP and Hard resetted the phone. Phone's working 100% now. I can probably post a guide somewhere I guess if highly requested.
Feel free to close the thread as the problem is solved
~
Click to expand...
Click to collapse
Hello yerhope!
from your last report on zte z828 frp bypass, i understood that you finally fix the , not able to access the Developer option nor access the factory reset. I am very keen to know how you did it.
I am a victim of this same circumstance.
guide please?
cant click reset my self
Hey, I would like to highly request the tutorial....
Furthermore, I'd like to say I've poured over these sort of sites, rephrased my questions, etcetc all trying to get the same things accomplished, getting past the google password, and yet you with your quick clearly stated actually step by step explanation were the one to get me the farthest in fixing this problem. :highfive:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
digitalchaos1980 said:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
Click to expand...
Click to collapse
can root and remove with gcpro.
thats what i did. with this, even wen u get into settings and tap factory reset, ntn will happen.
re: zte z828 resolved problem???
digitalchaos1980 said:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
Click to expand...
Click to collapse
He said he resolved problem but put no feedback so others can benefit, I really doubt he resolved the problem of bypassing or unlocking or rooting his phone, he probably slammed it on the floor and resolved the problem that way. We don't need people like that here. I will try it when I get a zte z828 from someone that has the same problem, I will post feedback if I am successful or not, so by July 15, 2016, I should now if it is possible.
xdauser9981 said:
He said he resolved problem but put no feedback so others can benefit, I really doubt he resolved the problem of bypassing or unlocking or rooting his phone, he probably slammed it on the floor and resolved the problem that way. We don't need people like that here. I will try it when I get a zte z828 from someone that has the same problem, I will post feedback if I am successful or not, so by July 15, 2016, I should now if it is possible.
Click to expand...
Click to collapse
He did get in. I did get in myself but when i tap factory reset nothing happen.
(Security patched)
Maybe he did resolve it like i did.
Root and remove it with gcpro
Thats what i did.
On some ZTE phones (has worked on 1 but not another for me), you can use the emergency dialer to dial:
*983*987#
This will lead you directly into factory reset options (if it works).
Solution worked on Acer Iconia B1-850 Tablet
Yerhope said:
Yeah I'll make a short guide I can try to post screenshots later but for now i'll try my best to guide you to the point where I am.
1. Go through the setup until you get to the google verifying part.
2. Open up your keyboard and hold down the comma to access the gear which will allow you to get into the google keyboard settings.
3. Once you're at the google keyboard settings go to Text Correction.
4. Then go to Personal Dictionary and select English (US) or whatever you have there.
5. Then click on the search button and just type random letters and hit search is what i did to get to this next step.
6.. You should be able to type in the letter "g" and you should see something called google voice typing
7. click that and go to Text-to-speech.
8. Then click the blue gear next to google text to speech
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
14. delete whatever is on the search and type in settings the option to access the settings should pop up on the bottom as a suggestion.
15. click that and now you're at the settings.
From here on i assume you know how to access the about phone and turn on developer settings but this is the problem you can turn it on but you cant access the developer menu you can just click it and nothing will happen. same for trying to reset the phone from the back up and reset menu.
if anybody knows what the case may be please let me know i'm constantly trying to find the solution to this whenever i have the free time but so far no solution has came up. i am able to download apks by instead of typing in settings on the google search i type in file manager and simply transfer over the apk through my pc onto the phone. that i can do without usb debugging becasue my pc picks the phone up as a portable device.
Click to expand...
Click to collapse
Solution!
Yerhope said:
So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.
Click to expand...
Click to collapse
Okay, I spent more time than i care to admit on getting through this frp. I have z3x and a few other utilities and i use them when i can, but i don't honestly lay hands on ZTE very often. Anyway, you do NOT need GC or any other box--
so following the last poster's steps (credit to yerhope):
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
this is where he leaves off... and where i pick up.
14. Download "quickshortcut maker" apk to your computer (or copy from apk extractor on a phone or any other method..
15. Select z828 in my computer and copy quickshortcut maker to downloads
16. On the phone, after clicking the search button, clear the browser box and type in "file manager" - it will show up just below. select it
17. Go to downloads in the file manager and select quickshortcut maker
18. install the app, blah blah blah
19. Once in the app, search "google account" you will have several pop up
20. Select the one that says "email and password" when you do, it will ask for a password to an account you aren't sure of.
21. click menu on top right - Browser sign in is the option - click it
22. Sign in to your email and account
23. Once you are signed in, press and hold power for a soft reset (restart)
24. Proceed as usual to wifi page and BOOM!
25. Profit. not much though, cuz its still a ZTE.
o12VOLTSo said:
Okay, I spent more time than i care to admit on getting through this frp. I have z3x and a few other utilities and i use them when i can, but i don't honestly lay hands on ZTE very often. Anyway, you do NOT need GC or any other box--
so following the last poster's steps (credit to yerhope):
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
this is where he leaves off... and where i pick up.
14. Download "quickshortcut maker" apk to your computer (or copy from apk extractor on a phone or any other method..
15. Select z828 in my computer and copy quickshortcut maker to downloads
16. On the phone, after clicking the search button, clear the browser box and type in "file manager" - it will show up just below. select it
17. Go to downloads in the file manager and select quickshortcut maker
18. install the app, blah blah blah
19. Once in the app, search "google account" you will have several pop up
20. Select the one that says "email and password" when you do, it will ask for a password to an account you aren't sure of.
21. click menu on top right - Browser sign in is the option - click it
22. Sign in to your email and account
23. Once you are signed in, press and hold power for a soft reset (restart)
24. Proceed as usual to wifi page and BOOM!
25. Profit. not much though, cuz its still a ZTE.
Click to expand...
Click to collapse
Does this mean you have confirmed this on ZTE?
Yerhopes solution worked for my zte lever
Follow yerhopes solution after step 15 while in settings go to backup and reset make sure back up data is off then factory reset erase Everything phone will reboot old owners info gone no need to download anything worked for 2 Zte levers i bought from ebay.
Bought a EE Jay Tablet (also a ZTE tablet) that had FRP enabled, easiest way I could do it was
1. connect to wifi, get to the previous account required screen.
2. open the keyboard and hold the @ symbol and open the keyboard settings.
3. top right corner press the 3 dots and choose help and type in apps in the search box.
4. access the app settings screen via the link from the help section then goto all and launch settings app
5. enable unknown sources in security and return to app settings screen and launch chrome this time or any browser.
6. goto http://rootjunkysdl.com/files/?dir=Apps and download this file com.sika524.android.quickshortcut.apk
7. you may get a download notification that the file has finished if not go back again to the app settings screen and all again and launch downloads app
8. you will now see the file download open it and install and then open the app
9. in the quick shortcut app search for google account and choose email and password and select try
10. now the google accounts manager has launched, in the top right corner press the 3 dots and choose browser sign-in
11. sign in with a google account and once done it will close and go back to the quick shortcut maker.
12. you still won't have access yet but all I done was reboot the device and continued the setup, this time there was no errors or required sign in and had full access.
Hope this helps someone, this was basically a copy of this video which may be helpful https://www.youtube.com/watch?v=GKdVvBSIb0M
Idk wat im doing but watever I do cant make crap any worse so I went under security and theres a place says trusted agents I clicked that and it said google smart lock so I turned it off im hoping this works guys ill let u know
yes
Arykit said:
Does this mean you have confirmed this on ZTE?
Click to expand...
Click to collapse
I used this method, personally, for zte Avid I believe. Yerhope's solution works for some firmwares prior to firmware i was on. i'm sorry, i do not recall that at this moment as it was some time ago. if Yerhope's solution is not effective for you, then progresss to my steps that pick up right where previous solution left off. so once again, YES, this worked on my device, did not test for others. my understanding is kingo can acquire root access in a special way as well that will allow you to adb clear frp. looking for commands? i do not have them sorry.