Hello everyone ill cut right to the point i rooted my Zte source using Kingo root app about a month ago and everything was fine and 3 days ago i installed a boot animation through rom toolbox and my phone now will not boot up i get black screen with flashing red light when i try to go into recovery mode by pressing and holding power and vol + it vibrates but stays at black screen and shows up on my pc as ZTE Handset Diagnostic Interface(DFU) (COM5) what do i do? Can i reset my phone?
King-Reaper said:
Hello everyone ill cut right to the point i rooted my Zte source using Kingo root app about a month ago and everything was fine and 3 days ago i installed a boot animation through rom toolbox and my phone now will not boot up i get black screen with flashing red light when i try to go into recovery mode by pressing and holding power and vol + it vibrates but stays at black screen and shows up on my pc as ZTE Handset Diagnostic Interface(DFU) (COM5) what do i do? Can i reset my phone?
Click to expand...
Click to collapse
i say there is still hope. seems the only thing you messed up is the boot animation. according to this thread http://forum.xda-developers.com/showthread.php?t=2520309
you have fastboot for your device, so in theory, you could use a fastboot flash recovery command to install CWM, and use it to install a ROM
The French Tickl3r said:
i say there is still hope. seems the only thing you messed up is the boot animation. according to this thread http://forum.xda-developers.com/showthread.php?t=2520309
you have fastboot for your device, so in theory, you could use a fastboot flash recovery command to install CWM, and use it to install a ROM
Click to expand...
Click to collapse
how do i get fastboot to recognize my device? i have correct drivers for phone since my brother has same phone i got drivers off his phone but fastboot does not see my device adb does not see my device as well
King-Reaper said:
how do i get fastboot to recognize my device? i have correct drivers for phone since my brother has same phone i got drivers off his phone but fastboot does not see my device adb does not see my device as well
Click to expand...
Click to collapse
did you enable usb debugging?
The French Tickl3r said:
did you enable usb debugging?
Click to expand...
Click to collapse
the last time my phone would boot up yea usb debugging was enabled by now it wont boot so i cant check to make sure
i dont use the same device as urs but as far as my knowledge goes
ur phone has usb degubbing on ...jus gt in fastboot and figure out a way to install a custom recovery
then u can just wipe data and ull b good to go...no need of a new rom
search xda forum for ur cell to flash recovery via fastboot
:good:
MOHIT.S said:
i dont use the same device as urs but as far as my knowledge goes
ur phone has usb degubbing on ...jus gt in fastboot and figure out a way to install a custom recovery
then u can just wipe data and ull b good to go...no need of a new rom
search xda forum for ur cell to flash recovery via fastboot
:good:
Click to expand...
Click to collapse
but fastboot dose not see my device and i dont know how to make fastboot see my device
King-Reaper said:
but fastboot dose not see my device and i dont know how to make fastboot see my device
Click to expand...
Click to collapse
dude...1st of all fastboot is a boot mode...to get into it u have to use combination keys while booting, some times use usb cord
just google how to fastboot with the name of ur device ull gt it!
Hey guys sorry I've been busy my phone is fixed I just took it to cricket and told them a software update broke my phone so this thread can be closed thanks for everyone's help
Sent from my ZTE_N9511 using XDA Free mobile app
Related
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
SaRLaY said:
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
Click to expand...
Click to collapse
I can help you. i just figured it out after walking away for a few weeks. pm me and ill tell you over google+ or skype and walk you through it.
i have same problem.
can someone solved it?
SaRLaY said:
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
Click to expand...
Click to collapse
mirul_up said:
i have same problem.
can someone solved it?
Click to expand...
Click to collapse
pseudosane said:
I can help you. i just figured it out after walking away for a few weeks. pm me and ill tell you over google+ or skype and walk you through it.
Click to expand...
Click to collapse
Go through this thread http://forum.xda-developers.com/showthread.php?t=2292828 it will definitely solve your problem, from the screen-shot it seems that you are using windows 10, i'm not sure that omap4430 drivers will work on windows 10 or not, but you'll try otherwise do the process on windows 7, your phone will revive...
@Codeplex its to complicated thread.
before mine become like this my phone alway succes writing recovery via adb fastboot but now i try writing recovery via adb fastboot always filed.
flashing firmware with cmahendra method always get 15% error..
I think all dev not care anymore about our phone..,
My phone is stuck on bootloop. I have cyanogenmod 13 installed on my moto g 3rd gen(2015). I can't seem to get into my system recovery either, which is now twrp and it just shows the logo for twrp recovery. I also for some dumb reason disabled my usb debugging mode, so i can't flash my phone either. Help plzz
Maybe go to bootloader and reflash TWRP
minimale_ldz said:
Maybe go to bootloader and reflash TWRP
Click to expand...
Click to collapse
Doesn't work, can't connect to bootloader
znyght said:
Doesn't work, can't connect to bootloader
Click to expand...
Click to collapse
So, if you turn the phone off and then hold "power" and "volume down" untill it boots, nothing happens?
minimale_ldz said:
So, if you turn the phone off and then hold "power" and "volume down" untill it boots, nothing happens?
Click to expand...
Click to collapse
of course, it goes into bootloader but my PC can't recognize anything. So I can't flash anything. USB Debugging is disabled. If there was a way to force connect that would be great
znyght said:
of course, it goes into bootloader but my PC can't recognize anything. So I can't flash anything. USB Debugging is disabled. If there was a way to force connect that would be great
Click to expand...
Click to collapse
You don't need USB debugging to use fastboot when your phone is booted into bootloader. What you need there is a fastboot tool and drivers. I'm using this one:
http://forum.xda-developers.com/showthread.php?p=48915118
and if it doesn't install correct drivers for you, you can get them here:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
first thing to do is check what fastboot returns after this command:
Code:
fastboot devices
if it shows your device ID you're good to go
I'd suggest downloading stock firmware first and flashing it before messing with custom recovery. Just remember Motorola often updates bootloader with new firmware so don't flash anything older than you had on your phone before.
Good luck
EDIT: you can also use RSD Lite to flash a new software, it basically automates fastbooting proccess, so theres no risk of misspelling or doing other stuff wrong
EDIT2: firmware is here:
http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
also, the OP (lost101) is a great, helpful guy who may give you some advice if you need
Thanks I'll give them a try
Originally Posted by minimale_ldz
You don't need USB debugging to use fastboot when your phone is booted into bootloader. What you need there is a fastboot tool and drivers. I'm using this one:
Click to expand...
Click to collapse
I've tried these but they didn't seem to work
Hello my friend just made an update of his phone which is a redmi 3 pro
His little bro shutdowned the phone while update was in process. The result is that now the phone have a bootloop, can't access the recovery (blackscreen when trying) and have a locked bootloader.
So I am not sur how to unlock the BL if I can't install a dev rom and can't boot. Not sur how to get into the recovery with the 2 same problems.
Could anyone help me for this one? Which is hard to me.
Thanks
PS: I tried to do something with unpacking boot and remove a ",verify" thing in the ramdisk but I guess I'll need the unlockedbootloader to flash the new boot.img?
Kicroy said:
Hello my friend just made an update of his phone which is a redmi 3 pro
His little bro shutdowned the phone while update was in process. The result is that now the phone have a bootloop, can't access the recovery (blackscreen when trying) and have a locked bootloader.
So I am not sur how to unlock the BL if I can't install a dev rom and can't boot. Not sur how to get into the recovery with the 2 same problems.
Could anyone help me for this one? Which is hard to me.
Thanks
PS: I tried to do something with unpacking boot and remove a ",verify" thing in the ramdisk but I guess I'll need the unlockedbootloader to flash the new boot.img?
Click to expand...
Click to collapse
I have the similar problem with my Redmi3. The Fastboot screen is the only screen that I can get now. Let me know if you have answer. Thanks.
If you can acces fastboot then just connect the phone to computer in fastboot and enter fastboot oem edl in cmd (maybe you will need Minimal ADB and fastboot to do it). Then flash official ROM via MiFlash.
ohoh seems interesting then it won't say couldn't verify or smthg? will tell that to my friend asap, thanks
EDL mode allows flashing with locked bootloader. Some models have this mode locked, but I think that is not the case with Redmi 3.
Kicroy said:
ohoh seems interesting then it won't say couldn't verify or smthg? will tell that to my friend asap, thanks
Click to expand...
Click to collapse
to go to edl mode just turn off your phone.plug the cable to your laptop or desktop but not to your phone.now be ready to press both volume up and down button as you plug the usb cable to ur phone.immediately after inserting the usb cable press both volume buttons at the same time.it should vibrate and go to edl mode.edl mode appears in black screen so to know if its in edl mode or not open miflash and click refresh ,your device should be shown as com10,20 or com something like that .once you go to edl mode you know what to do if you have used miflash to flash roms.hope this helps you.
jokerpappu said:
to go to edl mode just turn off your phone.plug the cable to your laptop or desktop but not to your phone.now be ready to press both volume up and down button as you plug the usb cable to ur phone.immediately after inserting the usb cable press both volume buttons at the same time.it should vibrate and go to edl mode.edl mode appears in black screen so to know if its in edl mode or not open miflash and click refresh ,your device should be shown as com10,20 or com something like that .once you go to edl mode you know what to do if you have used miflash to flash roms.hope this helps you.
Click to expand...
Click to collapse
I have a problem with my redmi 3. It makes reboot and it does not charge if its not closed.
Can you help me to fix or do you now where i can find a solution.....
geuthym said:
I have a problem with my redmi 3. It makes reboot and it does not charge if its not closed.
Can you help me to fix or do you now where i can find a solution.....
Click to expand...
Click to collapse
Well about that i dont know.but your best bet to solve it is by changing the software.if that does not helps then you should take your device to a technician for repairing.
jokerpappu said:
Well about that i dont know.but your best bet to solve it is by changing the software.if that does not helps then you should take your device to a technician for repairing.
Click to expand...
Click to collapse
When i bouht it the software it was unnoficial then i put with miflash the china dev. All the problem start when i make updates apps and the android web view.
geuthym said:
When i bouht it the software it was unnoficial then i put with miflash the china dev. All the problem start when i make updates apps and the android web view.
Click to expand...
Click to collapse
try flashing official global rom then see if the problem still persists or not
Hey! I am back with some news of my friend!
He tried to run the EDL mode but when he does that the phone simply goes into the bootloop again... He asked a vendor from Aliexpress to get a french rom, is there a way that the phone doesn't have EDL because of the rom or something like that? I mean is EDL a hardware-thing or a software-thing
same problem
cukru said:
If you can acces fastboot then just connect the phone to computer in fastboot and enter fastboot oem edl in cmd (maybe you will need Minimal ADB and fastboot to do it). Then flash official ROM via MiFlash.
Click to expand...
Click to collapse
I have same problem, but this way is not work, because bootloader is locked. Im forget for replacing recovery.img in update package with twrp.
I had this problem before few monthes
my solution was to "force" putting this device on EDL mode
I clicked on vol up + vol down + power together and got into EDL mode, then miflash it.
google - xiaomi understanding download mode
it will send you into miui forum
then second method, download mode, it is what I've described
Hello guys, I am new here to XDA Developers, so here's my take on my phone's problem..
Long story short, I wanted to root my phone so I could enable the OTG option for my phone cuz I tend to get my storage filled up and use a USB to transfer files. So, I did root my phone, got its bootloader unlocked and successfully done the operation. I used the kiwi_twrp_3-21_recovery.img via ADB and Fastboot tool for this.
But when I used ADB and Fastboot to flash the boot-kiwi-marshmallow-otg,img file and restart it afterwards, the phone will go straight to eRecovery mode. Here I cannot download the recovery it wants because it always show download info fail of some sort and that I cannot debug the phone either. I do can get it to Fastboot mode but my computer won't detect it.. So my phone is basically a stone now. What should I do now? It is my first time so I don't wanna get busted, any help will be appreciated! Thanks!
For reference: I was using this this thread for OTG enabling feature:
https://forum.xda-developers.com/honor-5x/how-to/tutorial-enable-otg-honor-5x-t3322274
And for rooting process, I just watched this video:
https://www.youtube.com/watch?v=Y-2SWbInT6U
Kingofiron257 said:
Hello guys, I am new here to XDA Developers, so here's my take on my phone's problem..
Long story short, I wanted to root my phone so I could enable the OTG option for my phone cuz I tend to get my storage filled up and use a USB to transfer files. So, I did root my phone, got its bootloader unlocked and successfully done the operation. I used the kiwi_twrp_3-21_recovery.img via ADB and Fastboot tool for this.
But when I used ADB and Fastboot to flash the boot-kiwi-marshmallow-otg,img file and restart it afterwards, the phone will go straight to eRecovery mode. Here I cannot download the recovery it wants because it always show download info fail of some sort and that I cannot debug the phone either. I do can get it to Fastboot mode but my computer won't detect it.. So my phone is basically a stone now. What should I do now? It is my first time so I don't wanna get busted, any help will be appreciated! Thanks!
For reference: I was using this this thread for OTG enabling feature:
https://forum.xda-developers.com/honor-5x/how-to/tutorial-enable-otg-honor-5x-t3322274
And for rooting process, I just watched this video:
https://www.youtube.com/watch?v=Y-2SWbInT6U
Click to expand...
Click to collapse
Solutions:
1. Boot into recovery (Power + VolUp) and restore last backup (I really do hope you have a backup). It should be enough to restore just boot image. Mine ended in eRecovery few days ago after messing with Magisk and I've successfully recovered my device from there
2. Download original firmware, extract it, boot into fastboot (obv., try fixing it first, but you've flashed TWRP so it must work for other stuff, too) and just reflash original boot image
3. Download original firmware, extract it, boot into fastboot and reflash original recovery, then try eRecovery (this will probably wipe all your data, though)
There are tons of manuals how to extract Huawei/Honor firmware images (even a nice little program to do it for you), so I'd suggest searching around for that SW instead of asking how.
Kingofiron257 said:
Hello guys, I am new here to XDA Developers, so here's my take on my phone's problem..
Long story short, I wanted to root my phone so I could enable the OTG option for my phone cuz I tend to get my storage filled up and use a USB to transfer files. So, I did root my phone, got its bootloader unlocked and successfully done the operation. I used the kiwi_twrp_3-21_recovery.img via ADB and Fastboot tool for this.
But when I used ADB and Fastboot to flash the boot-kiwi-marshmallow-otg,img file and restart it afterwards, the phone will go straight to eRecovery mode. Here I cannot download the recovery it wants because it always show download info fail of some sort and that I cannot debug the phone either. I do can get it to Fastboot mode but my computer won't detect it.. So my phone is basically a stone now. What should I do now? It is my first time so I don't wanna get busted, any help will be appreciated! Thanks!
For reference: I was using this this thread for OTG enabling feature:
https://forum.xda-developers.com/honor-5x/how-to/tutorial-enable-otg-honor-5x-t3322274
And for rooting process, I just watched this video:
https://www.youtube.com/watch?v=Y-2SWbInT6U
Click to expand...
Click to collapse
what recovery do you have now?? can you access twrp? or you are left with emui recovery??
if you have emui recovery, just perform a dload flash
Looks like he solved it.
adriansticoid said:
Looks like he solved it.
Click to expand...
Click to collapse
We need his solution , the one he tried
gopinaidu77 said:
We need his solution , the one he tried
Click to expand...
Click to collapse
Let's wait for his post.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Let's wait for his post.
Click to expand...
Click to collapse
Its been long he replied. Omg ,what is going ?
Stop. Spamming. The. Thread. For. Points.
Hii Friends,
I am new to xda as i got an problem with my Redmi Note 3.
Specs Before Dead:
Miui 8.2.4
Android 6.0
32 Gb Rom,3 Gb Ram
I was trying to flash Android 8.0 Rom via Twrp {Flashed Through Mi Flash Tool}. Twrp Flashed Successfully and Then I started with flashing with Oreo Rom.It also got flashed successfully but the problem I think is I forgot to flash Lazy Flasher due to which the phone booted but was lock even though i entered the right password It started to reset the phone. Then the phone turned off never revived from there.
As I tried to power up many times and tried almost all the combination Keys like Power+Vol up,Power+Vol down,Power+Vol up+Vol Down,etc.Only Red Light is blinking while connected to charging or PC. In PC the Port shows Qualcomm 900E and cannot be recognized in Mi Flash Tool. As Mi flash tool detects Qualcomm 9008.Even I manually Tried to change the driver to 9008 but didn't help me to flash the ROM.Shown an error: Device attached is not working; in Mi Flash Tool
Even I showed in a repair center near me but he ended up with no solution even. I have been trying to get it in Edl mode so that i can flash Fast boot Rom but no clue for that.
If any clue for this would be really appreciated!!!
Your Believer
R$(Rishabh Sharma)
Thinker Hour =)
Here you go:
https://forum.xda-developers.com/re...mi-note-3-pro-special-edition-mm-rom-t3453470
Say if it was working
Useless Thread Dude
Maximaro said:
Thinker Hour =)
Here you go:
https://forum.xda-developers.com/re...mi-note-3-pro-special-edition-mm-rom-t3453470
Say if it was working
Click to expand...
Click to collapse
As I mentioned all the problem in the thread....there's nothing wrong with bootloader.
Thanks but no thanks
More info required: Official unlock or Unofficial unlock?
After flashing oreo ROM lazy flasher is not required you need to format data ( apart from wiping data ) to boot the device.
when connected to PC when the red light is blinking that means you're in EDL mode, now try holding power + vol down button, keep holding until you get a vibration & get into fastboot mode.
Then you can use fastboot commands to check if the bootloader is still unlocked & can flash TWRP again if erased.
But, if device is unable to enter fastboot mode then you must flash MIUI fastboot ROM through EDL.
The procedure is the same for flashing but you need appropriate drivers en.miui.com/forum.php?mod=attachment&aid=NzU4MzF8ZWU0ZWM1OTR8MTM5ODc1NDUzM3w2NDg1MDkzM3wxOTY5Nw%3D%3D
look like EDL mode
I can buy ur phone if u want to sell it. Reply if u r interested.
Unofficial Unlock
VaibhavKumar07 said:
More info required: Official unlock or Unofficial unlock?
After flashing oreo ROM lazy flasher is not required you need to format data ( apart from wiping data ) to boot the device.
when connected to PC when the red light is blinking that means you're in EDL mode, now try holding power + vol down button, keep holding until you get a vibration & get into fastboot mode.
Then you can use fastboot commands to check if the bootloader is still unlocked & can flash TWRP again if erased.
But, if device is unable to enter fastboot mode then you must flash MIUI fastboot ROM through EDL.
The procedure is the same for flashing but you need appropriate drivers
I have tried holding all the combination keys as mentioned earlier but no results. So without getting in Fastboot mode i cannot flash the rom and I don't think so that my device is in EDL mode because PC device manager shows Qualcomm 900E instead of 9008.
Thanks for replying to the thread and please provide other solution.
Click to expand...
Click to collapse
OK
forever.parv said:
I can buy ur phone if u want to sell it. Reply if u r interested.
Click to expand...
Click to collapse
ok
Hello,
Is there a solution to this problem? I too have the exact issue now.
Thanks
Rahim.
I am ready to buy the phone + also can help you solve the issue.. which one do you want
Test Point Method
bro just go for test point method, it works for me
for that use have open backcover of your phone
Solution please
evansourav said:
I am ready to buy the phone + also can help you solve the issue.. which one do you want
Click to expand...
Click to collapse
It would be great if u provide a solution for this.
Rishabh Sharma_10 said:
It would be great if u provide a solution for this.
Click to expand...
Click to collapse
Can you turn off the device?
Yudhz® said:
look like EDL mode
Click to expand...
Click to collapse
Yeah his phone in EDL mode. I went through this problem. Now everything is working fine.
---------- Post added at 05:19 PM ---------- Previous post was at 05:15 PM ----------
You're already in EDL mode. So start from edl part. Try this... http://en.miui.com/thread-235865-1-1.html
evansourav said:
Can you turn off the device?
Click to expand...
Click to collapse
The device is already dead.
What happens when you plug charger? What about Qualcomm QHSUSB BULK? Is it showing up in EDL? Vibration Works? LCD Backlight Turns On?
santoshbodake said:
bro just go for test point method, it works for me
for that use have open backcover of your phone
Click to expand...
Click to collapse
Once happened to me this method worked for me
same issue here have you got any solution
This happens to me once...but i got it solved. This is really an edl mode of the phone. Keep trying connecting it to pc and try pressing those volume and power buttons if there is any voice connecting to pc means your phone is not dead. So, keep trying.
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778
Here, this helped me. If you follow the instructions correctly, you will be able to unlock bootloader, boot into twrp and then flash your custom rom. Skip to the part when you will have the red led blinking.
Hope it helps.