Hello guys,
I will try to explain my problem in few points. I was trying to flash my phone with CM11 and the steps I took are:
1. flashed kernel using fastboot (boot.img)
2. wiped data, cache etc.
3. noticed I forgot to copy CM11 to internal memory
4. the phone can't boot and I'm unable to copy data, it stucked at Sony logo
5. I can't recover it as I wiped all data
6. tried to flash it with stock rom using flashtool, but the green light turn on only for about 2 sec and then the red one appears/ the same with fastboot purple led
7. I can still enter CWM, but I don't know how it could help
dominictrance said:
Hello guys,
I will try to explain my problem in few points. I was trying to flash my phone with CM11 and the steps I took are:
1. flashed kernel using fastboot (boot.img)
2. wiped data, cache etc.
3. noticed I forgot to copy CM11 to internal memory
4. the phone can't boot and I'm unable to copy data, it stucked at Sony logo
5. I can't recover it as I wiped all data
6. tried to flash it with stock rom using flashtool, but the green light turn on only for about 2 sec and then the red one appears/ the same with fastboot purple led
7. I can still enter CWM, but I don't know how it could help
Click to expand...
Click to collapse
very easy,just flash the original kernel for your current ROM.
Then it should boot
Ben Ling said:
very easy,just flash the original kernel for your current ROM.
Then it should boot
Click to expand...
Click to collapse
It's not that easy. I can't flash it because both flashmode or fastboot aren't working.
dominictrance said:
It's not that easy. I can't flash it because both flashmode or fastboot aren't working.
Click to expand...
Click to collapse
don't use flashtool,use the fastboot tools and open command, type the letters i mentioned just now.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Ben Ling said:
don't use flashtool,use the fastboot tools and open command, type the letters i mentioned just now.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Also tried that. I connected usb cable while kepping pressed volume up key and typed in command line 'fastboot flash boot boot.img and it keep saying < waiting for device >.
Is there a way to upload kernel or whole rom to internal memory when the phone is bricked?
dominictrance said:
Also tried that. I connected usb cable while kepping pressed volume up key and typed in command line 'fastboot flash boot boot.img and it keep saying < waiting for device >.
Is there a way to upload kernel or whole rom to internal memory when the phone is bricked?
Click to expand...
Click to collapse
Extract the zip http://d-h.st/vvJ
Put your boot.img in the extracted folder
Open command in that folder
and type the command
hold volume up while you are connecting your phone to pc
Ben Ling said:
Extract the zip
Put your boot.img in the extracted folder
Open command in that folder
and type the command
hold volume up while you are connecting your phone to pc
Click to expand...
Click to collapse
Still the same. The purple led appears for just 2 seconds and then the red one.
dominictrance said:
Is there a way to upload kernel or whole rom to internal memory when the phone is bricked?
Click to expand...
Click to collapse
Can you upload or do anything with a brick other than to use it as a brick?
Try this http://d-h.st/9Pw
ChikeD said:
Can you upload or do anything with a brick other than to use it as a brick?
Try this
Click to expand...
Click to collapse
I can't, that's why I asked.
The problem is that the phone do not enter flash or fastboot mode so I'm unable to upload kernel or rom using these methods.
dominictrance said:
I can't, that's why I asked.
The problem is that the phone do not enter flash or fastboot mode so I'm unable to upload kernel or rom using these methods.
Click to expand...
Click to collapse
It sure does, what do you think "Device connected in flash mode" means?
Try it
The problem is now solved as I tried flashing it on another computer.
Thank you all for your help.
Related
I have sony ericsson neo v on 4.0.4 build 4.1.b.0.431 with unlocked bootloader (by official method), rooted, and CWM installed by X-part. I believe the cause is that I did not format /system (in mounts and storage), format /cache, and format /Data.
I am unable to access CWM. Could anyone able to access CWM and then re-flash the Pureness by CWM, or I have to flash with FlashTool to install the original Stock ICS. Then start all over again??!!
I have not done any FlashTool before. Any guideline??
Many thanks!!!
Did you first install the kernel as advised?
If not, then flash the kernel through fastboot and then boot into CWM.
Sent from my Xperia Neo V using Tapatalk 2
I actually flash the follow the installation as follow but apparently omit step 4-6 below:
1.Factory reset in cwm
2.wipe cache partition
3.wipe dalvik cache
4.Format /system (in mounts and storage)
5.Format /cache
6.Format /Data
7.Install Xperia_Ice_Cream_Pureness_build_10.00.zip
8.Install patch for your phone model
9.Reboot now and you are done !
I did not 'first install the kernal as advised'??
Is this a fix, and could you tell me more how exactly fastboot and flash the kernal as you suggest??
Thanks!!!
misato9307 said:
I actually flash the follow the installation as follow but apparently omit step 4-6 below:
1.Factory reset in cwm
2.wipe cache partition
3.wipe dalvik cache
4.Format /system (in mounts and storage)
5.Format /cache
6.Format /Data
7.Install Xperia_Ice_Cream_Pureness_build_10.00.zip
8.Install patch for your phone model
9.Reboot now and you are done !
I did not 'first install the kernal as advised'??
Is this a fix, and could you tell me more how exactly fastboot and flash the kernal as you suggest??
Thanks!!!
Click to expand...
Click to collapse
Flash alliance kernel via fastboot...after that you'll be able to access cwm( To get into fastboot turn off your phone and plug in the usb while holding the menu key,led will turn blue... In the folder where fast boot is present in your pc hold shift key and press the right button & open cmd, then enter fastboot flash boot boot.img)"boot.img will be the name of the img file you're about to flash"
Or
You can enter into cwm by using the app called x parts, but you'll be unable to get into cwm by pressing the volume down key
Press thanks if I helped you
Sent from my LT26i using Tapatalk 2
sujeesh.p7 said:
Flash alliance kernel via fastboot...after that you'll be able to access cwm( To get into fastboot turn off your phone and plug in the usb while holding the menu key,led will turn blue... In the folder where fast boot is present in your pc hold shift key and press the right button & open cmd, then enter fastboot flash boot boot.img)"boot.img will be the name of the img file you're about to flash"
Or
You can enter into cwm by using the app called x parts, but you'll be unable to get into cwm by pressing the volume down key
Press thanks if I helped you
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Few more queries to clarify:
1. '......In the folder where fast boot is present in your pc hold': pc stands for PC Companion??
2. Do I need to download boot.img?? If so, please forward me the link??
3. After flashing the boot.img, is it just lead to fixing the CWM??
4. After fixing the CWM, should I simply follow the steps again on flashing the Pureness ROM, or I must flash the 'alliance kernel' first??
5. Please forward me the link for 'alliance kernel'.
Many thanks!!!
As for your questions,
1. PC here means your computer.. And the folder means that folder where you have kept your fastboot files!
2 & 5. Here's the link of the alliance kernel that you need to flash..
http://forum.xda-developers.com/showthread.php?t=1566871
Copy this .img kernel into the fastboot folder, and rename it to boot.img
Holding the shift key, right click and you get an option to open the command window..
In fastboot mode, holding the menu key while inserting the usb cable.. Type the following in the cmd..
fastboot flash boot boot.img
Now turn your phone on.. Boot into CWM by pressing the volume down button.. Install the ROM from CWM!
Sent from my Xperia Neo V using Tapatalk 2
iamdchosen1 said:
As for your questions,
1. PC here means your computer.. And the folder means that folder where you have kept your fastboot files!
2 & 5. Here's the link of the alliance kernel that you need to flash..
http://forum.xda-developers.com/showthread.php?t=1566871
Copy this .img kernel into the fastboot folder, and rename it to boot.img
Holding the shift key, right click and you get an option to open the command window..
In fastboot mode, holding the menu key while inserting the usb cable.. Type the following in the cmd..
fastboot flash boot boot.img
Now turn your phone on.. Boot into CWM by pressing the volume down button.. Install the ROM from CWM!
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
Thanks again.
I understand all what you advise. Basically this is how bootloader was unlocked by official method, of course apart from flash the boot.img.
However if I able to save from stuck at SONY logo, is it true that my NEO V could boot as usual before??
Thanks!!!
You won't stuck at Sony logo anymore if you follow all the steps properly!
Sent from my Xperia Neo V using Tapatalk 2
iamdchosen1 said:
You won't stuck at Sony logo anymore if you follow all the steps properly!
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
Everything fixed. Thanks!!!
problem
when i flash the kernal it says that it is waiting for device and nothing happen pleaase help !!
---------- Post added at 03:43 PM ---------- Previous post was at 03:37 PM ----------
sujeesh.p7 said:
Flash alliance kernel via fastboot...after that you'll be able to access cwm( To get into fastboot turn off your phone and plug in the usb while holding the menu key,led will turn blue... In the folder where fast boot is present in your pc hold shift key and press the right button & open cmd, then enter fastboot flash boot boot.img)"boot.img will be the name of the img file you're about to flash"
Or
You can enter into cwm by using the app called x parts, but you'll be unable to get into cwm by pressing the volume down key
Press thanks if I helped you
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
it keeps telling me in the command menu that it is waiting for device what should i do !
aliiahmed.20 said:
when i flash the kernal it says that it is waiting for device and nothing happen pleaase help !!
---------- Post added at 03:43 PM ---------- Previous post was at 03:37 PM ----------
it keeps telling me in the command menu that it is waiting for device what should i do !
Click to expand...
Click to collapse
You are not connected in fastboot.
Turn off phone.
Press menu button on phone and connect usb.
Open command window and naviagate to where your fastboot file is.
Type fasboot devices
If it returns nothing your phone is not connected.
Like this CONNECTED DEVICES:
If it is connected it will return something like this
CONNECTED DEVICES: 65373FDHC67
Send me a screen shot of your PC after you have typed fastboot devices
gregbradley said:
You are not connected in fastboot.
Turn off phone.
Press menu button on phone and connect usb.
Open command window and naviagate to where your fastboot file is.
Type fasboot devices
If it returns nothing your phone is not connected.
Like this CONNECTED DEVICES:
If it is connected it will return something like this
CONNECTED DEVICES: 65373FDHC67
Send me a screen shot of your PC after you have typed fastboot devices
Click to expand...
Click to collapse
okay my device is connected but it tells me now that it's not rooted !
aliiahmed.20 said:
okay my device is connected but it tells me now that it's not rooted !
Click to expand...
Click to collapse
Have you ever root your device??
aliiahmed.20 said:
okay my device is connected but it tells me now that it's not rooted !
Click to expand...
Click to collapse
Fastboot refers to unlocked bootloader as root.
Have you unlocked your bootloader?
You will know if you have done it! If you are unsure then you have not unlocked it, therefore, you cannot flash custom kernels so you need to either:
1. Use custom roms that are for LOCKED bootloader, or
2. Unlock your bootloader. To do this check the sticky threads in the DEV section
gregbradley said:
Fastboot refers to unlocked bootloader as root.
Have you unlocked your bootloader?
You will know if you have done it! If you are unsure then you have not unlocked it, therefore, you cannot flash custom kernels so you need to either:
1. Use custom roms that are for LOCKED bootloader, or
2. Unlock your bootloader. To do this check the sticky threads in the DEV section
Click to expand...
Click to collapse
my bootloader is locked
but when i unlock it i need the android sdk program but when i download it i doesnt get any extras with it or even a package i can download
aliiahmed.20 said:
my bootloader is locked
but when i unlock it i need the android sdk program but when i download it i doesnt get any extras with it or even a package i can download
Click to expand...
Click to collapse
You cannot conect in fastboot with a locked bootloader.
Also, it seems daft that you are using 2 threads to discuss this problem.
My final bit of advice.
Download flashtool (its in the sticky threads in the dev section)
Download a stock .ftf (Found in the sticky threads in the dev section)
Flash the .ftf using flashtool when connected in flash mode (Not fastboot mode) You enter flashmode by pressing back button, not the enu button when connecting.
Once you have done that the phone should boot up with stock rom. Then you can use flashtool to install a recovery and install the pureness rom properly.
gregbradley said:
You cannot conect in fastboot with a locked bootloader.
Also, it seems daft that you are using 2 threads to discuss this problem.
My final bit of advice.
Download flashtool (its in the sticky threads in the dev section)
Download a stock .ftf (Found in the sticky threads in the dev section)
Flash the .ftf using flashtool when connected in flash mode (Not fastboot mode) You enter flashmode by pressing back button, not the enu button when connecting.
Once you have done that the phone should boot up with stock rom. Then you can use flashtool to install a recovery and install the pureness rom properly.
Click to expand...
Click to collapse
okay i did that but it come to the end and disconnect the device
aliiahmed.20 said:
okay i did that but it come to the end and disconnect the device
Click to expand...
Click to collapse
yes, have you tried to turn the phone on.....disconnect it and turn it on
You could always show a screenshot of what flashtool outputs so we can see the log....
gregbradley said:
yes, have you tried to turn the phone on.....disconnect it and turn it on
You could always show a screenshot of what flashtool outputs so we can see the log....
Click to expand...
Click to collapse
could you give me a link for the ftf file because i didnt find a suitable one for my mobile
and the mobile is connected right (the LED is green) it tells that it's preparing files and every thing go well untill the end it says that the device is disconnected
aliiahmed.20 said:
could you give me a link for the ftf file because i didnt find a suitable one for my mobile
and the mobile is connected right (the LED is green) it tells that it's preparing files and every thing go well untill the end it says that the device is disconnected
Click to expand...
Click to collapse
http://www.mediafire.com/?c2762j3jakn79kj
Download (Dont worry its for neo v, it doesnt matter, its just stockrom to get you going)
Place in firmware folder of flashtool.
Open flashtool
press flash icon
choose the file in the link
Turn off phone
Press back button and keep pressed then attach usb cable.
Flashtool will recognise your phone
let go of back button
wait untill flashtool finishes
disconnect and turn on phone.
First boot may take a while.
Goto settings and allow unknown sources and usb debugging.
Then use flash tool to root, install recovery and then you can install pureness via CMW making sure you follow every step in the guide, including all the wipes.
My D6503 is currently running paranoid android. Previously I've been using cwm but yesterday I decided to try out TWRP. I install TWRP using the TWRP manager in play store but after that when I try to boot to recovery it would show a black screen and orange light on the top speaker. Then I tried to install XZDualRecovery using the installer's method 1 (custom rom with superSU). However after install when the phone reboots it stucks and the sony logo keep flashing. I force shut down using the red button on the side and I managed to get to the system and removed XZDualRecovery. However I still can't get into recovery, it will just show that black screen and orange light. So I wanna ask you guys what should I do to get access to recovery again?
Thank you
elvin316 said:
My D6503 is currently running paranoid android. Previously I've been using cwm but yesterday I decided to try out TWRP. I install TWRP using the TWRP manager in play store but after that when I try to boot to recovery it would show a black screen and orange light on the top speaker. Then I tried to install XZDualRecovery using the installer's method 1 (custom rom with superSU). However after install when the phone reboots it stucks and the sony logo keep flashing. I force shut down using the red button on the side and I managed to get to the system and removed XZDualRecovery. However I still can't get into recovery, it will just show that black screen and orange light. So I wanna ask you guys what should I do to get access to recovery again?
Thank you
Click to expand...
Click to collapse
use flashtool>flashtool.net to flash the TWRP IMG in the original development section, you will need to re-flash Paranoid android ROM to get cwm back
you cant change the recovery pre-packaged into a ROM
Xperia's don't have a recovery partition so recoveries are bundled with the kernel
Envious_Data said:
use flashtool>flashtool.net to flash the TWRP IMG in the original development section, you will need to re-flash Paranoid android ROM to get cwm back
you cant change the recovery pre-packaged into a ROM
Xperia's don't have a recovery partition so recoveries are bundled with the kernel
Click to expand...
Click to collapse
thank you for your reply
I've downloaded flashtool but what function should I use to flash the img? Because the install recovery key is disabled for me.
elvin316 said:
thank you for your reply
I've downloaded flashtool but what function should I use to flash the img? Because the install recovery key is disabled for me.
Click to expand...
Click to collapse
the flash icon at the top left and to flash the boot with sin,elf or img files you use fastboot
fastboot if i remember right is voume up and plug into computer with a powered off device
Flash Device
Envious_Data said:
the flash icon at the top left and to flash the boot with sin,elf or img files you use fastboot
fastboot if i remember right is voume up and plug into computer with a powered off device
Click to expand...
Click to collapse
select kernel to boot, select system to flash or select kernel to flash?
elvin316 said:
select kernel to boot, select system to flash or select kernel to flash?
Click to expand...
Click to collapse
select kernel to flash
Envious_Data said:
select kernel to flash
Click to expand...
Click to collapse
I flashed openrecovery-twrp-2.8.0.1-sirius then when I boot up my phone after the sony logo the screen will become black. Then I flashed the boot.img inside paranoid android rom's zip file. I can now enter to the system but still cannot boot into recovery
elvin316 said:
I flashed openrecovery-twrp-2.8.0.1-sirius then when I boot up my phone after the sony logo the screen will become black. Then I flashed the boot.img inside paranoid android rom's zip file. I can now enter to the system but still cannot boot into recovery
Click to expand...
Click to collapse
hmm, odd, i think you will have to reflash stock, reflash stock then go back to PA
you can use flashtool to reflash a stock FTF
Envious_Data said:
hmm, odd, i think you will have to reflash stock, reflash stock then go back to PA
you can use flashtool to reflash a stock FTF
Click to expand...
Click to collapse
If I flash back to stock, will it relock my bootloader? And can you explain briefly what are the steps?
Thank you
elvin316 said:
If I flash back to stock, will it relock my bootloader? And can you explain briefly what are the steps?
Thank you
Click to expand...
Click to collapse
it will not relock your bootloader
1. download flashtool
2. download a FTF (there is a ftf thread at top of the general section)
3. put FTF in firmwares folder in flashtool folder
4. click flash device icon at the top left
5. click the FTF you selected
6. wait for it to finish preparing
7. power off device
8. plug in flashmode (volume down held and plug usb in)
9. wait for it to finish
10. enjoy stock or install recovery and flash a custom rom
Envious_Data said:
it will not relock your bootloader
1. download flashtool
2. download a FTF (there is a ftf thread at top of the general section)
3. put FTF in firmwares folder in flashtool folder
4. click flash device icon at the top left
5. click the FTF you selected
6. wait for it to finish preparing
7. power off device
8. plug in flashmode (volume down held and plug usb in)
9. wait for it to finish
10. enjoy stock or install recovery and flash a custom rom
Click to expand...
Click to collapse
thank you very much. Looks like it gonna take plenty of time. Will do it later when I have time
There is a easier way to get CWM back. Just flas the boot.img from pa and then go into fastboot (in case you are not already and do "fastboot erase recovery"
On the Z2 the recovery is included in the kernel, and once recovery boots it get expanded to the recovery part. As this is filled by TWRP ATM, none of the 2 will boot.
Sent from my Sony Tablet S using XDA Free mobile app
Myself5 said:
There is a easier way to get CWM back. Just flas the boot.img from pa and then go into fastboot (in case you are not already and do "fastboot erase recovery"
On the Z2 the recovery is included in the kernel, and once recovery boots it get expanded to the recovery part. As this is filled by TWRP ATM, none of the 2 will boot.
Sent from my Sony Tablet S using XDA Free mobile app
Click to expand...
Click to collapse
He said he already tried that
I think the dual recovery that was installed caused problems
http://forum.xda-developers.com/showthread.php?p=56275721
This spesific post
I cant access my recovery but the fastboot still ok. Tried flash using fastboot mode n sp flash tool and everything went fine. But when i switched on the phone, i still get bootloop. Anybody can help? What should i do?
Thanks
Flash stock firmware using sp flash tool. Install drivers, load scatter file in sp flash tool,click download, remove battery frm ur mobile then connect ur mobile to pc by data cable
Done..
Sent from my Nexus 7 using XDA Free mobile app
Abinash12 said:
Flash stock firmware using sp flash tool. Install drivers, load scatter file in sp flash tool,click download, remove battery frm ur mobile then connect ur mobile to pc by data cable
Done..
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the reply.. i've done all the step and the flashing process is successful. But, the bootloop still there
what did you do before, that causes the bootloop ?
dbzgts said:
I cant access my recovery but the fastboot still ok. Tried flash using fastboot mode n sp flash tool and everything went fine. But when i switched on the phone, i still get bootloop. Anybody can help? What should i do?
Thanks
Click to expand...
Click to collapse
Try to flash TWRP 3
Extract twrp.img and rename it to recovery.img
Install xiaomi usb drivers
Extract adb drivers anywhere in your computer
Copy recovery.img ( renamed it to only recovery) into adb tools folder
Boot your phone into fastboot mode by pressing volume down key and pressing power key simultaneously , and then releasing power key .
Connect your Redmi Note 2 to your computer through data cable
Go into adb tools folder => while pressing shift key => right click => and click open cmd here !
Type fastboot flash recovery recovery.img and press enter.
After flashing TWRP through adb flash the lite version http://forum.xda-developers.com/redmi-note-2/development/rom-slimmiui-dev-stable-t3296594
I hope it helps.
coremania said:
what did you do before, that causes the bootloop ?
Click to expand...
Click to collapse
I rooted my phone using kingroot. After that i try to flash twrp using flashify. It booted to twrp when it ask me to reboot the phone. But inside the twrp recovery, the screen hang so i pressed the power button to hard reset the phone. After that I got this bootloop
mihayash said:
Try to flash TWRP 3
Extract twrp.img and rename it to recovery.img
Install xiaomi usb drivers
Extract adb drivers anywhere in your computer
Copy recovery.img ( renamed it to only recovery) into adb tools folder
Boot your phone into fastboot mode by pressing volume down key and pressing power key simultaneously , and then releasing power key .
Connect your Redmi Note 2 to your computer through data cable
Go into adb tools folder => while pressing shift key => right click => and click open cmd here !
Type fastboot flash recovery recovery.img and press enter.
After flashing TWRP through adb flash the lite version http://forum.xda-developers.com/redmi-note-2/development/rom-slimmiui-dev-stable-t3296594
I hope it helps.
Click to expand...
Click to collapse
i saw a successfully flashed using sp flash tool is around 2.04GB but mine only around 1.49GB...so, I think there is something wrong here. i attached the picture below
dbzgts said:
i saw a successfully flashed using sp flash tool is around 2.04GB but mine only around 1.49GB...so, I think there is something wrong here. i attached the picture below
Click to expand...
Click to collapse
Just try the method i posted before,i've had problems like yours on other phones in the last 2 years,and each time i've succeded,just try that method.
mihayash said:
Just try the method i posted before,i've had problems like yours on other phones in the last 2 years,and each time i've succeded,just try that method.
Click to expand...
Click to collapse
Already tried both method. It should all good but dunno why it still got bootloop
mihayash said:
Just try the method i posted before,i've had problems like yours on other phones in the last 2 years,and each time i've succeded,just try that method.
Click to expand...
Click to collapse
I bought this phone one week ago and after a lot of experiments that lite rom and a few modifications i am very satisfied with performance and baterry life,i've noticed that wifi consumption on baterry its smaller,on 3g acceptable,4g draining fast.
---------- Post added at 11:01 AM ---------- Previous post was at 10:58 AM ----------
Also bootloop after flash recovery from adb... strange right?
dbzgts said:
Already tried both method. It should all good but dunno why it still got bootloop
Click to expand...
Click to collapse
you can access recovery after adb flashing ?
---------- Post added at 11:13 AM ---------- Previous post was at 11:07 AM ----------
dbzgts said:
Also bootloop after flash recovery from adb... strange right?
Click to expand...
Click to collapse
very strange,just try to download another stock software,try developer latest one
---------- Post added at 11:15 AM ---------- Previous post was at 11:13 AM ----------
dbzgts said:
Already tried both method. It should all good but dunno why it still got bootloop
Click to expand...
Click to collapse
latest one i've downloaded is miui_HMNote2Global_V7.1.3.0.LHMMICK_8f1ce11602_5.0.zip and it has 934 mb (unzipped)
Have tried v7.1.4 and 7.1.1...
I'll try version v6 maybe later on... hope it works... thanks for the reply @mihayash
still no luck?? any other sugestion guys??
http://forum.xda-developers.com/redmi-note-2/help/hardbrick-phone-t3297163/post64900975#post64900975 may this helps you, strange problem
coremania said:
http://forum.xda-developers.com/redmi-note-2/help/hardbrick-phone-t3297163/post64900975#post64900975 may this helps you, strange problem
Click to expand...
Click to collapse
Still no luck ?... is it possible my emmc corrupt or maybe damaged?
as you used spflashtool, i hope you didn´t format ?
latest one i've downloaded is miui_HMNote2Global_V7.1.3.0.LHMMICK_8f1ce11602_5.0 .zip and it has 934 mb (unzipped)
Click to expand...
Click to collapse
I think this rom has locked bootloader... so if you have working fastboot, try:
fastboot getvar all
Click to expand...
Click to collapse
If you're lucky, among the many lines of output you get will be ones such as:
(bootloader) unlocked: no (bootloader) secure: yes
Click to expand...
Click to collapse
If you have locked bl, try to flash older version of global rom.
maxx_hr said:
I think this rom has locked bootloader... so if you have working fastboot, try:
If you're lucky, among the many lines of output you get will be ones such as:
If you have locked bl, try to flash older version of global rom.
Click to expand...
Click to collapse
No, the bootloader is not locked but the value is not secure
coremania said:
as you used spflashtool, i hope you didn´t format ?
Click to expand...
Click to collapse
I have tried all the 3 options... is that affect my phone if i choose format + download option?
i have a sony xperia z2 d6503. i successfully flashed a 6.0.1 pre-rooted .575 firmwarea and forgot about the bootloop fix. then i realized it and successfully flashed it. the problem is after all that my phone is unable to get into the recovery mode because there is no purple light when i should press volup to start TWRP. Phone boots up system when i plug my charger in, and doesn't show the battery icon with procents instead. system works but i'd like to flash pexocam mod and i can't halp plz!!!
658speeder said:
i have a sony xperia z2 d6503. i successfully flashed a 6.0.1 pre-rooted .575 firmwarea and forgot about the bootloop fix. then i realized it and successfully flashed it. the problem is after all that my phone is unable to get into the recovery mode because there is no purple light when i should press volup to start TWRP. Phone boots up system when i plug my charger in, and doesn't show the battery icon with procents instead. system works but i'd like to flash pexocam mod and i can't halp plz!!!
Click to expand...
Click to collapse
Same!! But i obey the sequence correctly, still the problem : (
n my Xposed apk didnt recognized Xposed v82 so i planned to install v85 instead, thats when i found this problem:crying:
Claude_Y said:
Same!! But i obey the sequence correctly, still the problem : (
n my Xposed apk didnt recognized Xposed v82 so i planned to install v85 instead, thats when i found this problem:crying:
Click to expand...
Click to collapse
did you try to repair it by pc companion? i can try it but first i'd like to know if it does anything
oh yes and my twrp app recognizes my recovery and even updates it successfully.
I have the same problem, but I'm going to try the instruction here, there's special note about the recovery: http://forum.xda-developers.com/xperia-z2/general/stock-t3355768
Si_NZ said:
I have the same problem, but I'm going to try the instruction here, there's special note about the recovery: http://forum.xda-developers.com/xperia-z2/general/stock-t3355768
Click to expand...
Click to collapse
ok thx m8 i'll try tomorrow write if it helps
658speeder said:
i have a sony xperia z2 d6503. i successfully flashed a 6.0.1 pre-rooted .575 firmwarea and forgot about the bootloop fix. then i realized it and successfully flashed it. the problem is after all that my phone is unable to get into the recovery mode because there is no purple light when i should press volup to start TWRP. Phone boots up system when i plug my charger in, and doesn't show the battery icon with procents instead. system works but i'd like to flash pexocam mod and i can't halp plz!!!
Click to expand...
Click to collapse
Claude_Y said:
Same!! But i obey the sequence correctly, still the problem : (
n my Xposed apk didnt recognized Xposed v82 so i planned to install v85 instead, thats when i found this problem:crying:
Click to expand...
Click to collapse
Si_NZ said:
I have the same problem, but I'm going to try the instruction here, there's special note about the recovery: http://forum.xda-developers.com/xperia-z2/general/stock-t3355768
Click to expand...
Click to collapse
Hey, don't worry if you do these steps exactly then your phone can enter the recovery normally and you can flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://www.androidfilehost.com/?fid=24521665358595410
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img.html
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?pref=2&pli=1
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
I wish that i had helped you. if you want any thing just ask me and i will answer.
658speeder said:
i have a sony xperia z2 d6503. i successfully flashed a 6.0.1 pre-rooted .575 firmwarea and forgot about the bootloop fix. then i realized it and successfully flashed it. the problem is after all that my phone is unable to get into the recovery mode because there is no purple light when i should press volup to start TWRP. Phone boots up system when i plug my charger in, and doesn't show the battery icon with procents instead. system works but i'd like to flash pexocam mod and i can't halp plz!!!
Click to expand...
Click to collapse
You need to press volume down key when you want to goes in to recovery,not up.
Послато са D6503 уз помоћ Тапатока
Mostafa Sherif said:
Hey, don't worry if you do these steps exactly then your phone can enter the recovery normally and you can flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://www.androidfilehost.com/?fid=24521665358595410
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img.html
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?pref=2&pli=1
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
I wish that i had helped you. if you want any thing just ask me and i will answer.
Click to expand...
Click to collapse
Is that advanced kernel going to work with a locked bootloader? I don't mind unlocking my bootload since I've already backed up the TA partition, but it is a hassle I'd like to avoid if possible.
Yes he would work
Послато са D6503 уз помоћ Тапатока
Mostafa Sherif said:
Hey, don't worry if you do these steps exactly then your phone can enter the recovery normally and you can flash any rom again and recover your phone from this brick
Click to expand...
Click to collapse
sorry but
5- Download this kernel from this link:
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
no files there, said be missing ( so i got no boot.img )
i tried an old cwm6.0 ( named boot.img ) but cannot enter twrp, seems never been flashed in.
Besides, your flashtool versions 1.5(20140318) but i install the another ver.flashtool-0.9.22.3-windows.exe, is that a point? Drivers seems ok
---------- Post added at 07:45 AM ---------- Previous post was at 07:42 AM ----------
658speeder said:
did you try to repair it by pc companion? i can try it but first i'd like to know if it does anything
Click to expand...
Click to collapse
er... i never used pcc yet, just installed and set aside
Claude_Y said:
sorry but
5- Download this kernel from this link:
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
no files there, said be missing ( so i got no boot.img )
i tried an old cwm6.0 ( named boot.img ) but cannot enter twrp, seems never been flashed in.
Besides, your flashtool versions 1.5(20140318) but i install the another ver.flashtool-0.9.22.3-windows.exe, is that a point? Drivers seems ok
---------- Post added at 07:45 AM ---------- Previous post was at 07:42 AM ----------
er... i never used pcc yet, just installed and set aside
Click to expand...
Click to collapse
Try to download the kernel again from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?pref=2&pli=1
Then extact it and you will find boot.img copy it to the path i told you about it and continue my steps and your phone will boot normally.
Tell me if there is anything and i will help you
Mostafa Sherif said:
Try to download the kernel again from this link:
Then extact it and you will find boot.img copy it to the path i told you about it and continue my steps and your phone will boot normally.
Tell me if there is anything and i will help you
Click to expand...
Click to collapse
caught it this time, thx!
Mostafa Sherif said:
Try to download the kernel again from this link:
Then extact it and you will find boot.img copy it to the path i told you about it and continue my steps and your phone will boot normally.
Tell me if there is anything and i will help you
Click to expand...
Click to collapse
Finally i made it, but still cannot enter twrp since 6.0.1 flashed... however the system processes correctly at least. thank u all the same!
658speeder said:
i have a sony xperia z2 d6503. i successfully flashed a 6.0.1 pre-rooted .575 firmwarea and forgot about the bootloop fix. then i realized it and successfully flashed it. the problem is after all that my phone is unable to get into the recovery mode because there is no purple light when i should press volup to start TWRP. Phone boots up system when i plug my charger in, and doesn't show the battery icon with procents instead. system works but i'd like to flash pexocam mod and i can't halp plz!!!
Click to expand...
Click to collapse
if you are on Locked Bootloader just follow the instruction in this post and it will work for sure:
http://forum.xda-developers.com/showpost.php?p=66232079&postcount=376
michel090428 said:
if you are on Locked Bootloader just follow the instruction in this post and it will work for sure:
http://forum.xda-developers.com/showpost.php?p=66232079&postcount=376
Click to expand...
Click to collapse
ok so idk if im doing it wrong or it just doesn't work recovery is still dead, still no purple led... system works just as it worked before, there was no taimport.stock so i left it (i did rename and delete chargemon though) the cmd after running install.bat said sth about system being write only if i remember well...
oh yes and i'm on locked bl and don't yet want to unlock it sry 4 my eng
658speeder said:
ok so idk if im doing it wrong or it just doesn't work recovery is still dead, still no purple led... system works just as it worked before, there was no taimport.stock so i left it (i did rename and delete chargemon though) the cmd after running install.bat said sth about system being write only if i remember well...
Click to expand...
Click to collapse
I see. I have encountered this error with recovery when i tried to update busybox and it seems that root was partially broken so no writing permission to System partitions.
What i did to solve this is installing kingroot and it gave me a root authentication error so i pressed fix root and it re-rooted my phone and repaired root permissions.
then i did the steps described in the above link and it worked.
ok so i'll flash stock 5.0 then root it again?
658speeder said:
ok so i'll flash stock 5.0 then root it again?
Click to expand...
Click to collapse
Flash 5 and than root via kingroot and than flash prerooted v6 and you would have root.
Sent from Galaxy S5 +
I was on TWRP3.0.2 recovery and i tried to flash the xzdualrecovery ,, NOW th phone has gone int bootloop and recovery is disappeared??
hi
you have to use fastboot
1 - Put the phone into fastboot mode - Insert one end of the Micro-USB cable into your PC. Turn off the device and wait at least 5 seconds. Press and hold the Volume Up button and plug the other end of the Micro-USB cable in to your device.
2 - fastboot flash recovery name.img
3 - fastboot reboot
clonato said:
hi
you have to use fastboot
1 - Put the phone into fastboot mode - Insert one end of the Micro-USB cable into your PC. Turn off the device and wait at least 5 seconds. Press and hold the Volume Up button and plug the other end of the Micro-USB cable in to your device.
2 - fastboot flash recovery name.img
3 - fastboot reboot
Click to expand...
Click to collapse
What are the exact commands i should use with fast boot ?
Is this is done with locked bootloader?
M94Khaled said:
What are the exact commands i should use with fast boot ?
Is this is done with locked bootloader?
Click to expand...
Click to collapse
N° 2 and N°3 are the commands
M94Khaled said:
What are the exact commands i should use with fast boot ?
Is this is done with locked bootloader?
Click to expand...
Click to collapse
Those are commands for an unlocked bootloader,I believe what you need to do to get out of the bootloop is to reflash your firmware through Flashtool if you are on a locked bootloader whcih also means all of your data will be gone.
As well don't install XZDualRecovery on 6.0.1 since it will cause a bootloop.
I did that too. I recovered by flashing via flash tool. I will recommend it highly if you are not a developer. Don't try stuff that you don't know.
atti9935 said:
I did that too. I recovered by flashing via flash tool. I will recommend it highly if you are not a developer. Don't try stuff that you don't know.
Click to expand...
Click to collapse
If i checked wipe data in flashtool, what exactly is gonna be deleted.
M94Khaled said:
If i checked wipe data in flashtool, what exactly is gonna be deleted.
Click to expand...
Click to collapse
your user data would be deleted but not internal storage.
I wiped user data and my internal storage was formatted.
I don't know but it was formatted.
atti9935 said:
I wiped user data and my internal storage was formatted.
I don't know but it was formatted.
Click to expand...
Click to collapse
Thats quite weird i flash using flashtool many times but it never wiped my internal storage
Hariskh said:
Thats quite weird i flash using flashtool many times but it never wiped my internal storage
Click to expand...
Click to collapse
Yup.
it happened to me , i had to install a rootable old software by flashtool but i lost my data
Solved
Sent from my D6503 using XDA-Developers mobile app