Hello, I am asking a couple questions today, as I cannot find all of the answers, and I have been looking for a while.
I just now rooted my Verizon G3, which has been updated to Lollipop, Software version VS98523C.
My first question is what recoveries are available, and how to install them? I would love a custom recovery to start regular backups, and install a custom Rom, which leads me to my next question, Which custom roms are there and what do you recommend installing on this device? I remember lving slimrom on my G2, until sprint ruined my phone, I have loved pac-rom on many tablets, I loved Cyanogenmod on my Samsung galaxy S2, and I am not sure which rom to use for the G3.
My final question, is what root apps are worth installing on the device? Which root apps are a must have? Any recommendations.
Thank you all for your help!
I believe you need to roll back to 10b. In other words, search xda for the tot or kdz method of returning to stock. Them you can install recoveries, root, etc. As far as I know you cannot install a bumped recovery from 23c
This program reportedly works to install TWRP on rooted lollipop: autorec
Note: I have not tried this method as I have not had the need to try it.
6NomoN6 said:
This program reportedly works to install TWRP on rooted lollipop: autorec [link removed to low post count]
Note: I have not tried this method as I have not had the need to try it.
Click to expand...
Click to collapse
i literally just used this to great success.
eddytheyeti2 said:
Hello, I am asking a couple questions today, as I cannot find all of the answers, and I have been looking for a while.
I just now rooted my Verizon G3, which has been updated to Lollipop, Software version VS98523C.
My first question is what recoveries are available, and how to install them? I would love a custom recovery to start regular backups, and install a custom Rom, which leads me to my next question, Which custom roms are there and what do you recommend installing on this device? I remember lving slimrom on my G2, until sprint ruined my phone, I have loved pac-rom on many tablets, I loved Cyanogenmod on my Samsung galaxy S2, and I am not sure which rom to use for the G3.
My final question, is what root apps are worth installing on the device? Which root apps are a must have? Any recommendations.
Thank you all for your help!
Click to expand...
Click to collapse
If you're looking for some good stock-based ROMs, you really need to check out @HolyAngel 's SkyDragon and @hsbadr 's Jasmine. I've been running SkyDragon for about a month now and have zero complaints and the performance and battery life are exceptional. If you like customizing, SkyDragon gives you the option to install the Xposed framework which allows for numerous tweaks and customizations.
As for the applications that I have found to be useful, you can't go wrong with any of the following which I use on my daily driver:
Xposed Modules;
G3 TweaksBox (a must-have)
Xposed Torch
YouTube AdAway
Root Apps;
App Ops
BusyBox Pro
Solid Explorer
SuperSU Pro
Titanium Backup Pro
LG Volume Booster
XCam LG (Pro)
After you install TWRP, keep a backup on your SD card and you've got nothing to worry about.
Q&A for [ROM][STOCK][5.0.2][D620] V20C Flashable Zip
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][STOCK][5.0.2][D620] V20C Flashable Zip. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
then the wifi with KDZ work?
KDZ with CSE FLASH works and WIFI NETWORK : D
nanni1989 said:
KDZ with CSE FLASH works and WIFI NETWORK : D
Click to expand...
Click to collapse
Actually, all that's needed is modem.img from the KDZ for the WiFi to work. Also normal flash should do it too.
Sent from my D620r [Stock 4.4.2 , -V- Kernel]
:good::good:
it's ok
Upload the screen shots.
Can I flash this with twrp recovery over stock kk?
D620r lolipop
When flashed via TWRP it works wifi, but not GSM. When flashed via KDZ, everything works.
Boot loop
I have a d620 that came with a v10e firmware. Two nights ago my phone updated to the 5.0.2 and I got stucked on the lg logo. Fortunately I've managed to flash it back using the stock rom. I really want to update to lollipop and I was wondering if any of you guys know how to get around the bootloop problem.
sviktoro said:
When flashed via TWRP it works wifi, but not GSM. When flashed via KDZ, everything works.
Click to expand...
Click to collapse
Use the latest version and it will work.
Can't install
IH after i'm try to install vkernel the phone is bricked now i flash stock and reunlock but when i try to install the phone doeasn't boot . is stucks on lg bootanimation, any solution?sorry for my bad english
Will It work when ive flashed another kernel?
Ive got a D620 with CM 12 installed and an Overclocking Kernel that (as far as I know) only works with the CM Rom...
How can I undo this and flash the stock kernel? I havent found it as download here...
D618 V20b lollipop BUG on COC
is there any bug on COC graphic failures on war logs and etc.? on clash of clans?
im using the stock-rom lollipop - CIS version and the bug on the COC game.
you have Screen wake up notifications with Glimpse Notifications from google play, for all lg g2 mini. perfect.
I've flashed the zip on my d620r, everything works great. There are no bugs, battery life is very good compared with KitKat 4.4.2, and smoother overall. Great job!
Upgrade from V10g to V20a keeping data
First of all, thanks to all putting effort into this development.
I own a D620r with software V10g and KitKat 4.4.2, unlocked bootloader and TWRP. I used towelroot to root it. Everything runs fine so far.
I got a notification for the official OTA update to V20a and downloaded it to the device. I tried to apply it but were stuck in a recovery loop. I learned that official OTA updates need stock recovery and I cannot apply them having TWRP installed. I applied this fix to escape from recovery loop. The device is alive again, but the LG updater app asks to apply the downloaded update once a day.
Now I found this thread. The phone is my main device and contains lots of apps and settings. I want to keep the data if possible.
A) Do I have to expect trouble when I flash the V20a from this thread without wiping the data partition?
B.1) Or would the following procedure be an alternative:
Flash stock recovery (I made a backup using Rashr)
Revert bootloader to original locked aboot
Apply OTA update
Root
Replace bootloader with the unlocked one
Flash TWRP
B.2) I read that towelroot is based on a security vulnerability of the linux kernel that is fixed with Lollipop . If that is true, can someone give a hint how to root on Lollipop?
C) Can I choose between V20c/D620 and V20a/D620r or do they belong to different devices and are incompatible?
Thanks for your time reading this post.
Thanks
Thank you for the Rom and the instructions. It works great, there are no functions that are not working.
It also solves the bug for the smartwatches that caused battery drains on Kitkat.
when a version with xposed???
peligropowers said:
when a version with xposed???
Click to expand...
Click to collapse
Never, because this is the stock rom in a flashable .zip for custom recovery.
And xposed for android 5 ist still alpha and doesn't work correct on our phone.
If you want to try xposed you can just install it.
Read the xposed thread for that.
Please don't ask any further questions about xposed here, this thread is only about zip flashable stock rom.
Thank you.
Installing this ROM
This post was a mistake. Question is below this.
I just flashed this ROM and a problem appeared
Every time I boot my phone up I get this message.
WARNING!
Current version is not available for user. Can't find matched cust for NT-code mcc/mnc[29403],subset[FF]
What does it mean?
EDIT:
Also one more question, can I update my phone OTA in case there is a new software?
[Q&A] Samsung Galaxy Mega 2 SM-G750A AT&T Root. Plus Hotspot unlocked for Cricket or
Q&A for Samsung Galaxy Mega 2 SM-G750A AT&T Root. Plus Hotspot unlocked for Cricket or other
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Samsung Galaxy Mega 2 SM-G750A AT&T Root. Plus Hotspot unlocked for Cricket or other. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Mega 2 as well.
KingRoot did work for me. I am looking for a custom ROM now, but there is like NO support from anywhere for this device. I hope we can get a developer onboard and get something built for these devices.
have a thread on android forums for this as well, you can do a search for Mega 2 and its the only thread on the mega 2 forum, screenname on there is Matt Cajon as well.
Maybe we can make something happen
Custom Recovery?
Any luck with a working custom recovery?
running backup before running the app.
Thank you shockazulu for your post on the mega2 root.
I'm new to this and have been looking and searching for the best way to do it and most have refurred the king root app.I do have a questions .
Do I still need to do a backup of the phone before running the app.?
Is this a preferment root as I noted your phone reverting back to it's original state?
Noticed there is a newer version of the king root app now 4.5 and would it be better to run that app ?
Thanks Again and I'm sure I'll have another question before I get into doing this !
Chris
I manage to root the galaxy mega 2 on the newer baseband G750AUCU3AOFA. Since for some reason you can't root it on that build. but with the modem flash it worked
Matt Cajon said:
KingRoot did work for me. I am looking for a custom ROM now, but there is like NO support from anywhere for this device. I hope we can get a developer onboard and get something built for these devices.
have a thread on android forums for this as well, you can do a search for Mega 2 and its the only thread on the mega 2 forum, screenname on there is Matt Cajon as well.
Maybe we can make something happen
Click to expand...
Click to collapse
The problem with the att version of the mega 2 is that the bootloader is locked. So there is no way to use a custom bootloader like Clockwork. Without a custom bootloader we can't load/flash roms.
But what we can do is........
We can use a program called Flashfire. Flashfire is a way to flash things on our phone without having to use the bootloader.
We can also use exposed launcher and wanam exposed. This is the tools we can use to make customise our stock rom.
One of us could customize a rom and create a step by step for how they created it. If it is a stable setup then instead of others flashing that custom ROM, they would fallow the steps to create the same custom ROM.
whats with the vague answer ...
if you rooted it on OFA how did you do it?!?!
WHAT MODEM?! please elaborate I need to know asap..
Any of you had luck on installing a custom recovery for it? i am trying to help another forum member who have this S750A .
I recently ported a custom TWRP for my device which is a SM-J105B. Found out that TWRP was easier to port/works better on it than CWM for instance. Maybe this is the case for you guys device, i want to help out.
i know this is a 1 year old post but if any were successful please share the knowledge cheers from Brasil!
Pindroid is trying to help me i have a samsung galaxy mega 2 sm-g750a also it said "unlocked" on the ad when i got it but anyways we are looking for the original 4.4.4 kitkat firmware and can't seem to find it anywhere but the one we did find that has repair in its title has never worked as far as flashing with it goes. I have lollipop right now and it works fine but it hasn't solved the problem im having with my IMEI so we are trying a downgrade to see if that helps. Anyways thanks for any help
I have a sm- g750a on 5.1.1 too ,tried kingo root ,kingoroot, with a no go ,roots but then just bootloops then I gotta reflash 5.1.1 firmware via Odin ...I've looked and looked just the run around on how to root this device,I really wanna root this phone love the screen and it's my go to phone for work ,if anyone could figure this out that would be awesome
I get the same thing...Boot looping after root..Firmware is 5.1.1..Anyone have thoughts?Thanks.
Surgeman said:
I get the same thing...Boot looping after root..Firmware is 5.1.1..Anyone have thoughts?Thanks.
Click to expand...
Click to collapse
Thoughts on how to root or how to fix the bootloop?
Piridroid said:
Thoughts on how to root or how to fix the bootloop?
Click to expand...
Click to collapse
The root is no problem..It's the boot loop is the biggest problem.And factory wiping it doesn't fix the issue.
Surgeman said:
The root is no problem..It's the boot loop is the biggest problem.And factory wiping it doesn't fix the issue.
Click to expand...
Click to collapse
As mrodriguezangel said on page 1:
"I have a sm- g750a on 5.1.1 too ,tried kingo root ,kingoroot, with a no go ,roots but then just bootloops THEN I GOTTA REFLASH 5.1.1 FIRMWARE VIA ODIN .."
Did you manage to root Mega 2 5.1.1 without issues? To remove the bootloop you will have to reflash your stock firmware via ODIN software.
According to the official AT&T page (is yours at&t?) :
https://www.att.com/devicehowto/tut..._KB425949?make=Samsung&model=GalaxyMega2G750A
Latest Kitkat is July 7, 2015
Android version: 4.4.4
Baseband version: G750AUCU3AOFA
Kernel Version: 3.4.39-2550495 [email protected]#1
Build number: KTU84P.G750AUCU3AOFA
Latest Lollipop is September 2, 2015
Android version: 5.1.1
Baseband version: G750AUCU3BOH4
Kernel Version: 3.4.39-5559233 [email protected]#1
Build number: LMY47X.G750AUCU3BOH4
Googled "G750AUCU3BOH4" and found http://www.mediafire.com/file/hd72qrsaeoob9tl/G750AUCU3BOH4+5.1.1.rar , try to know more about it, but should work ok.
How did you root?
Piridroid said:
As mrodriguezangel said on page 1:
"I have a sm- g750a on 5.1.1 too ,tried kingo root ,kingoroot, with a no go ,roots but then just bootloops THEN I GOTTA REFLASH 5.1.1 FIRMWARE VIA ODIN .."
Did you manage to root Mega 2 5.1.1 without issues? To remove the bootloop you will have to reflash your stock firmware via ODIN software.
According to the official AT&T page (is yours at&t?) :
https://www.att.com/devicehowto/tut..._KB425949?make=Samsung&model=GalaxyMega2G750A
Latest Kitkat is July 7, 2015
Android version: 4.4.4
Baseband version: G750AUCU3AOFA
Kernel Version: 3.4.39-2550495 [email protected]#1
Build number: KTU84P.G750AUCU3AOFA
Latest Lollipop is September 2, 2015
Android version: 5.1.1
Baseband version: G750AUCU3BOH4
Kernel Version: 3.4.39-5559233 [email protected]#1
Build number: LMY47X.G750AUCU3BOH4
Googled "G750AUCU3BOH4" and found http://www.mediafire.com/file/hd72qrsaeoob9tl/G750AUCU3BOH4+5.1.1.rar , try to know more about it, but should work ok.
How did you root?
Click to expand...
Click to collapse
I have rooted it 2 different ways...Kingo and Super SU..Once rebooted it will boot loop over and over.It has something to do with the Knox itself.I've been working on a way to disable it but it's enterprise and it doesn't have an option under security.And yes it's SG-M750A AT&T Mega 2.
Surgeman said:
I have rooted it 2 different ways...Kingo and Super SU..Once rebooted it will boot loop over and over.It has something to do with the Knox itself.I've been working on a way to disable it but it's enterprise and it doesn't have an option under security.And yes it's SG-M750A AT&T Mega 2.
Click to expand...
Click to collapse
mmm Ok. How did you root with SuperSU ? CF-auto? recovery? supersu-me ?
Is there an option called "Unlock by OEM" under "Developer Options"? Enable it.
Another thing, according to this tutorial for the SG-M750F:
https://androidmtk.com/root-samsung-galaxy-mega-2-sm-g750f
This F version which should be similar is only rootable with a specific firmware. Maybe thats the case for the A version aswell.
Also, next time you have root, before you reboot you should make a backup of your EFS and Modem folders. You can do that via ADB, EFS tools or using some apks for instance.
Check dlo2000 post on first page, he had kitkat installed, rooted with Kingo and let the the phone OTA update to lollipop... somehow his IMEI number got corrupted and now he cannot use his phone to make calls. Thats why backing up your EFS partition is important, your IMEI is there.
So from what i understood, you did know stock firmware flash would remove bootloops, but you currently dont know how to root without creating a bootloop, is that correct? cheers
---------- Post added at 01:48 AM ---------- Previous post was at 01:37 AM ----------
Surgeman said:
I have rooted it 2 different ways...Kingo and Super SU..Once rebooted it will boot loop over and over.It has something to do with the Knox itself.I've been working on a way to disable it but it's enterprise and it doesn't have an option under security.And yes it's SG-M750A AT&T Mega 2.
Click to expand...
Click to collapse
Enterprise... maybe it has extra security turned on, idk.
How do you know it has to do with KNOX, did it show some knox message? Chainfire's supersu sometimes asks to let it disable knox. Which version of supersu did you use?
Piridroid said:
mmm Ok. How did you root with SuperSU ? CF-auto? recovery? supersu-me ?
Is there an option called "Unlock by OEM" under "Developer Options"? Enable it.
Another thing, according to this tutorial for the SG-M750F:
https://androidmtk.com/root-samsung-galaxy-mega-2-sm-g750f
This F version which should be similar is only rootable with a specific firmware. Maybe thats the case for the A version aswell.
Also, next time you have root, before you reboot you should make a backup of your EFS and Modem folders. You can do that via ADB, EFS tools or using some apks for instance.
Check dlo2000 post on first page, he had kitkat installed, rooted with Kingo and let the the phone OTA update to lollipop... somehow his IMEI number got corrupted and now he cannot use his phone to make calls. Thats why backing up your EFS partition is important, your IMEI is there.
So from what i understood, you did know stock firmware flash would remove bootloops, but you currently dont know how to root without creating a bootloop, is that correct? cheers
---------- Post added at 01:48 AM ---------- Previous post was at 01:37 AM ----------
Enterprise... maybe it has extra security turned on, idk.
How do you know it has to do with KNOX, did it show some knox message? Chainfire's supersu sometimes asks to let it disable knox. Which version of supersu did you use?
Click to expand...
Click to collapse
I used Kingo the first time,and even used Super SU me to remove Kingo...AT&T devices doesn't require any unlock for cricket because AT&T owns them lock stock and barrel.You're getting the same service just bottle necked on the 4G end of it at 8 mbs and it's unlimited.I have been reading through other post in some other forums,and the SE for Android pops up about security settings and ask to reboot to restore them.Once you do..the boot loop begins.I have searched the error out also...and it pertains to knox.I have even tried to remove knox before rebooting..No go..still boot loops...Myself and another user have the same issue,and we've been trying to figure a work around and nothing yet.Some other information I have read that with the Lollipop update it adds the enterprise knox that may cause issues.But it doesn't hurt to try...Oh I forgot to mention...I made a efs backup before I started the journey but good looking out..Thanks..
Surgeman said:
I used Kingo the first time,and even used Super SU me to remove Kingo...AT&T devices doesn't require any unlock for cricket because AT&T owns them lock stock and barrel.You're getting the same service just bottle necked on the 4G end of it at 8 mbs and it's unlimited.I have been reading through other post in some other forums,and the SE for Android pops up about security settings and ask to reboot to restore them.Once you do..the boot loop begins.I have searched the error out also...and it pertains to knox.I have even tried to remove knox before rebooting..No go..still boot loops...Myself and another user have the same issue,and we've been trying to figure a work around and nothing yet.Some other information I have read that with the Lollipop update it adds the enterprise knox that may cause issues.But it doesn't hurt to try...Oh I forgot to mention...I made a efs backup before I started the journey but good looking out..Thanks..
Click to expand...
Click to collapse
OK, so it was supersu-me and the issue has to do with SElinux right.
dude i own a Galaxy J1 mini and i was the "first person" to root the B/F/M/Y versions (custom recovery method, based on an obscure version created for the H version) , this device is also a 5.1.1 android, SElinux activated from factory. The website which provided the root for the H version vanished a couple of weeks after they annouced it... lucky to find it, i just had to read easy tutorials here in XDA to learn how to properly port the TWRP for my specific model B and later on for the other J1 mini variants on ppl demand.
What i find out from my experience is, if i was going to wait for some expert to find how to root it, i would still be waiting... keep trying!
I would personally as a noob, try to find out how to disable KNOX or SElinux . There are probably commands which can be run as root user to disable them, for instance "selinux set permissive" (i know it exists, something like that, maybe). There are apps which claim to do those stuff, just search playstore for "knox" or "selinux" and you will see. In case none does the job automatically, search how to do it manually.
In my case, the TWRP+SuperSU method worked just fine, looks definitive. BUT, before i found this, the only other real option was a chinese app called 360root. None other root app works on my device so far. But its root was unstable and not compatible with all apps, thats why i searched for a permanent root.
THis 360root only worked on the older firmware (also 5.1.1, but older samsung release).
My opinion is... in case you dont mind using kitkat (android 4.4) i would flash the oldest firmware and try to root it with Kingo (which owners of variants of the MEGA 2 claim is the only tool capable, it even turns knox off in some cases). Remembering that if this worked, you would have to disable automatic firmware updates. Letting a rooted device to auto-update usually creates more trouble.
If kitkat is a no go for ya and you want to stick with lollipop, i would first try to disable the protections via apps (root ; dont reset, install app, try). Same applies to manually trying "disabling commands" via Terminal or ADB, root, try.
If that still does not work ... i would try to download a stock lolipop firmware and extract its files. I would then try to create a custom recovery (read tutorials) and also check if there were any options i could manually reprogram inside boot.img , recovery.img, system.img etc... (more tutorials lol)
Again man, im no expert, but thats what i would do! i actually downloaded that lollipop stock firmware for your device and will try to look inside it when i have time.
Piridroid said:
OK, so it was supersu-me and the issue has to do with SElinux right.
dude i own a Galaxy J1 mini and i was the "first person" to root the B/F/M/Y versions (custom recovery method, based on an obscure version created for the H version) , this device is also a 5.1.1 android, SElinux activated from factory. The website which provided the root for the H version vanished a couple of weeks after they annouced it... lucky to find it, i just had to read easy tutorials here in XDA to learn how to properly port the TWRP for my specific model B and later on for the other J1 mini variants on ppl demand.
What i find out from my experience is, if i was going to wait for some expert to find how to root it, i would still be waiting... keep trying!
I would personally as a noob, try to find out how to disable KNOX or SElinux . There are probably commands which can be run as root user to disable them, for instance "selinux set permissive" (i know it exists, something like that, maybe). There are apps which claim to do those stuff, just search playstore for "knox" or "selinux" and you will see. In case none does the job automatically, search how to do it manually.
In my case, the TWRP+SuperSU method worked just fine, looks definitive. BUT, before i found this, the only other real option was a chinese app called 360root. None other root app works on my device so far. But its root was unstable and not compatible with all apps, thats why i searched for a permanent root.
THis 360root only worked on the older firmware (also 5.1.1, but older samsung release).
My opinion is... in case you dont mind using kitkat (android 4.4) i would flash the oldest firmware and try to root it with Kingo (which owners of variants of the MEGA 2 claim is the only tool capable, it even turns knox off in some cases). Remembering that if this worked, you would have to disable automatic firmware updates. Letting a rooted device to auto-update usually creates more trouble.
If kitkat is a no go for ya and you want to stick with lollipop, i would first try to disable the protections via apps (root ; dont reset, install app, try). Same applies to manually trying "disabling commands" via Terminal or ADB, root, try.
If that still does not work ... i would try to download a stock lolipop firmware and extract its files. I would then try to create a custom recovery (read tutorials) and also check if there were any options i could manually reprogram inside boot.img , recovery.img, system.img etc... (more tutorials lol)
Again man, im no expert, but thats what i would do! i actually downloaded that lollipop stock firmware for your device and will try to look inside it when i have time.
Click to expand...
Click to collapse
Ok let me know what you find with the firmware when you get the chance.I have used 360root also in the past myself on devices when nothing else would work.I have tried several times and different ways.Disabled Knox via terminal with temp. root and still no go.It's the SELinux enforcing is the biggest problem.Kingo will install as a system app..but you won't have full root unless you run the apk to root the device again and it reboots on it's own after about 5 minutes or so.I'll keep stabbing at it..and post my findings.I assume I'm not the only one that could use this.Thanks for your time Piridroid.
Anything new on this?