[Solved][Sola] Stuck in bootloop, flashtool doesn't work, locked bootloader - Sony Xperia P, U, Sola, Go

Hi guys, I believe my phone is bricked/stuck in bootloop and I need your help. I was trying to flash this ROM and just before I started to install, after I did a full wipe, the phone hanged, I did a soft-reset and my Sola got stuck in bootloop. I tried flashing .54 FTF stock ICS ROM, but Flashtool keeps giving me an error and aborts the flash. (also, after less than a minute, the phone will go out of flash mode and get stuck on Sony logo)
Is there another way I can flash back a stock ROM and unbrick my phone? Thanks in advance for the help, I hope you can help me out, I'm a total noob, it's the first time I tried to flash a custom ROM
EDIT: BTW, I hard reset the phone several times in attempt to turn it off and boot in flash mode, since the phone will not shut down.
2nd EDIT: I can't get into recovery either.
3rd EDIT: SOLVED using the x86 version of flashtool instead of the x64.

Related

[Q] Xperia P stuck on boot

Hi,
Hope someone can help. I've tried to install a custom ROM today and I'm afraid I managed to brick my phone (Xperia P). Here is what i did:
I started out according to the Starters guide:
-Rooted phone
-Installed CWM
-Made a backup
-Unlocked Bootloader
-Installed JB Moonbreaker 3.5: at this point I was actually still following the starters guide, as in: wiping cache, wiping data,wiping dalvik cache and then installing from zip.
-The phone is currently stuck on the loading screen that comes after "Sony" and "Xperia" (the colorful swirling thingie)
-I can only shut it down by pressing and holding the power and volume up keys until it vibrates 3 times in a row.
-Starting with pressing volume down key repeatedly will not bring up CWM (also gets stuck on the same screen).
-Will also not fastboot anymore properly. (waiting for device for "fastboot.exe -i 0x0fce getvar version"; LED on device will not even light up as blue, goes to green instantly)
-In Device Manager I can see it as "Android" with a yellow exclamation mark.
-Sony PC Companion gives me the "My Sony Xperia P LT22 is connected" popup every 15 seconds but will actually not show the device as connected
I'm wondering if I can flash a stock rom on it to recover it or if there is anything else that can be done.
Thanks in advance
huvikman said:
Hi,
Hope someone can help. I've tried to install a custom ROM today and I'm afraid I managed to brick my phone (Xperia P). Here is what i did:
I started out according to the Starters guide:
-Rooted phone
-Installed CWM
-Made a backup
-Unlocked Bootloader
-Installed JB Moonbreaker 3.5: at this point I was actually still following the starters guide, as in: wiping cache, wiping data,wiping dalvik cache and then installing from zip.
-The phone is currently stuck on the loading screen that comes after "Sony" and "Xperia" (the colorful swirling thingie)
-I can only shut it down by pressing and holding the power and volume up keys until it vibrates 3 times in a row.
-Starting with pressing volume down key repeatedly will not bring up CWM (also gets stuck on the same screen).
-Will also not fastboot anymore properly. (waiting for device for "fastboot.exe -i 0x0fce getvar version"; LED on device will not even light up as blue, goes to green instantly)
-In Device Manager I can see it as "Android" with a yellow exclamation mark.
-Sony PC Companion gives me the "My Sony Xperia P LT22 is connected" popup every 15 seconds but will actually not show the device as connected
I'm wondering if I can flash a stock rom on it to recover it or if there is anything else that can be done.
Thanks in advance
Click to expand...
Click to collapse
Keep the stock fw ready to be flashed using flashtool, enter into flashmode and flash it !
Sent from my Xperia U using xda app-developers app
Can't seem to get it flashed from flashtool. I'm pressing the back button and connecting the USB and I'M just getting the same stuff on the phone, while flashtool is waiting for the phone.
I did manage to enter fastboot again though. Should I be flashing CWM from here (since I can't enter it). Or kernel then rom? I'm a bit lost.
huvikman said:
Can't seem to get it flashed from flashtool. I'm pressing the back button and connecting the USB and I'M just getting the same stuff on the phone, while flashtool is waiting for the phone.
I did manage to enter fastboot again though. Should I be flashing CWM from here (since I can't enter it). Or kernel then rom? I'm a bit lost.
Click to expand...
Click to collapse
Its volume down key and Plug in USB, to enter flashmode
Not back button.
Or flash a kernel by fastboot mode, enter CWM and install the ROM (assuming you have the zip file in the SD card )
Sent from my Xperia U using xda app-developers app
No luck. I get a green LED and nothing happens. If I hold down volume down for really-really long then I'm back to the same boot animation.
huvikman said:
No luck. I get a green LED and nothing happens. If I hold down volume down for really-really long then I'm back to the same boot animation.
Click to expand...
Click to collapse
yes green LED it is,
i hope you had the flashing process ready at the PC right ?
First make sure your phone is shut down. long press power+vol up until you feel 3 vibrations.
From there you can try fastboot mode or flash mode.
Utensils vioment
Alright done all that, still is the same. I've started to play with other USB ports and I noticed that when I get connected it tries installing the SEMC Flash device driver. It fails with "device unplugged" message exactly at the same time when when the Sony logo appears. Then it tries installing MTU USB Device as well. Reinstalled flashtool drivers and tried in different ports. It seems as if the phone is not staying in flashmode?
huvikman said:
Alright done all that, still is the same. I've started to play with other USB ports and I noticed that when I get connected it tries installing the SEMC Flash device driver. It fails with "device unplugged" message exactly at the same time when when the Sony logo appears. Then it tries installing MTU USB Device as well. Reinstalled flashtool drivers and tried in different ports. It seems as if the phone is not staying in flashmode?
Click to expand...
Click to collapse
I recall I had that issue with wundows 7 at the beginning, what I did then was to boot my windows xp and managed to flash from there.
I have tried many things since, and if I am not mistaken it's installing flahtool drivers that fixed it finally.
I think there are 3 drivers there you need to install.
nifileb Naval
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
did you tried to flash the rom over ICS, if yes then thats why your p got stuck at boot, coz i too got the same prob, when i tried to flash the JB moonbreaker over ICS, so what i did was pressed the power button and volume up button till 3 vibration, start flashtool and flash stock ICS firmware, but don't uncheck wipe data, otherwise you will get bootloop, after flashing is complete, now download and flash stock JB firmware, root your phone using doomlord's easy root kit or any other way you know, install cwm and now reboot into cwm flash JB stock or custom kernel and then the rom, thats it, just let me know if the prob is solved, thanks
garvitdelhi said:
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
Click to expand...
Click to collapse
Managed to get the phone back to working with this, thanks! Now just a couple of questions left . Do I have to reroot and reinstall CWM after this? I guess BL is still unlocked right?
maknom66 said:
did you tried to flash the rom over ICS, if yes then thats why your p got stuck at boot, coz i too got the same prob, when i tried to flash the JB moonbreaker over ICS, so what i did was pressed the power button and volume up button till 3 vibration, start flashtool and flash stock ICS firmware, but don't uncheck wipe data, otherwise you will get bootloop, after flashing is complete, now download and flash stock JB firmware, root your phone using doomlord's easy root kit or any other way you know, install cwm and now reboot into cwm flash JB stock or custom kernel and then the rom, thats it, just let me know if the prob is solved, thanks
Click to expand...
Click to collapse
It was on JB stock. I'll check if I cano boot to CWM now or have to redo all that stuff and then try flashing Phantom Kernel and then Moonbreak. Will let you know
xperia p
huvikman said:
Managed to get the phone back to working with this, thanks! Now just a couple of questions left . Do I have to reroot and reinstall CWM after this? I guess BL is still unlocked right?
Click to expand...
Click to collapse
yup bl will always be unlocked regfardless of what rom you flash unless you relock it
yup if you have to install cwm again then if you want it and you have to first root it again as well
------------------------------------------------------------
Xperia P PAC rom jb 4.2.2 user
hit thanks if i helped
Thanks everyone for the input, issue resolved, kernel and rom flash was successful.
Stuck on boot
Guys I have the same problem.
I wasn't satisfied with the rom I put on my phone so I went on to put another one on it.
Flashed the kernel with fastboot, went into cwm, deleted system, cache etc. and went on to flash the rom, but there was no rom zip there, and I was sure I had put it. It was probably an error during the copy procces and it just stopped, I assumed it copied.
Well, now it is just stuck on the boot screen. I can get into fastboot and cwm, but I have nothing to flash.
I tried using the Sony recovery "Emma" but it just stays blank when I connect the phone..
Is there something else I can do?
rocker55555 said:
Guys I have the same problem.
I wasn't satisfied with the rom I put on my phone so I went on to put another one on it.
Flashed the kernel with fastboot, went into cwm, deleted system, cache etc. and went on to flash the rom, but there was no rom zip there, and I was sure I had put it. It was probably an error during the copy procces and it just stopped, I assumed it copied.
Well, now it is just stuck on the boot screen. I can get into fastboot and cwm, but I have nothing to flash.
I tried using the Sony recovery "Emma" but it just stays blank when I connect the phone..
Is there something else I can do?
Click to expand...
Click to collapse
The rom probably won't work if you delete /system so reflash stock JB first maybe this will help: http://forum.xda-developers.com/showthread.php?t=1849170
Facing exact same issue i think
garvitdelhi said:
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
Click to expand...
Click to collapse
Hi
I think im facing a very similar issue, i m very new to this and therefore didnt understand the solution. I did visit the developer site for emma, but can you tell me the exact thing to do after starting Emma. I mean, when do i connect the phone and how, what commands to give. Below is explanation of how i got into this and what all ive tried.
OK i ve been trying to flash a new custom rom on my Xperia P, i looked at a number of guidelines and doing things step by step.
Since im very new to this i downloaded a few Roms. I was following the guide "http://droidors.com/2014/07/08/update-xperia-p-lt22i-to-android-4-4-4-kitkat-with-slimkat-custom-rom/2/" and everything was going fine. I reached the step to "fastboot flash boot boot.img", i did that and then went on the next step to boot in CWM Recovery and install the zip rom and the Gapps. During the Zip Rom install i got status 7 error.
Now, i noticed that i might have flashed the wrong Rom so rechecked the guide and installed the correct Rom which is mentioned in "http://forum.xda-developers.com/xperia-u/p-development/rom-slimkat-4-4-2-release-candidate-t2657795" . But now THE PROBLEM IS, AFTER I FLASHED THE INCORRECT IMG, MY PC IS NOT RECOGNISING THE XPERIA P SAYING IT DOESNOT RECOGNISE THE DRIVERS, therefore im not able to copy the ROM Zip on the SDcard, to then run it from CWM.
After sometime i tried the below
Ok, now i tried to flash the stock Rom through this link "http://forum.xda-developers.com/xperia-u/p-development/ftf-firmware-xperia-p-generic-world-t2322163", through flashtool to bring my phone back to life. I installed the drivers as per instructions from drivers folder, but for some reason the pc is just not accepting. I did install through this exact method yesterday night and it worked perfectly.
Please suggest. I hope im asking at the right place.
Urgent help please
I forgot to mention, after I flashed the SlimKat Rom, and things went out of hand ( till this point i could see Slimkat logo at boot and could also go in CWM Recovery ), I tried to restore through Nandroid Backup i had done. As soon i selected the restore option and then the backup file, within 2-3 seconds the phone went off, and then on boot all i can do is see "SONY" on screen. Nothing else happens.
I ve tried all this on a different machine, with different wires and different USB port, no luck
Kindly advise, im stuck with no spare phone.
Solved i guess
OK Brother,
I downloaded EMMA and am currently downloading the service. It is very self explanatory. What was amazing is when i recognised my phone "What a sight "
Flashtools wasnt able to do that, so i guess the manufacture tools are damn important ( i wasnt exactly of the opinion before )
Also it is downloading Android 4.0.4 Build 6.1.1.b.1.54, which first came on the device, which also makes me think may be i should have tried that rather than trying to flash with the JB Rom all this while.
Man, i was scared. Thanks for this thread Bro.
God Bless
Will inform once the phone is booted up to confirm it worked.
Emma Worked
OK guys, I can confirm its EMMA "Flash tool for Xperia" fixed the problem for me. It installed 4.0.4 on it.
Also there is a pdf in the Download which guides about the usage.
Sigh
Correction- it installed the latest stock ROM jb

[Q] Xperia P flashtool problem

Hi, I'm not experienced with custom roms, so I bricked my phone trying to install cyanogenmod, please help me
I tried to install custom rom on my xperia p so I unlocked bootloader, rooted and got recovery. Everything seemed to be fine until i tried to flash cyanogenmod, I can't provide link because I'm new user. Using Flashtool I accidentally (not knowing exactly what I'm doing) chose "select system to Flash" and klicked on boot.img from this pack. After several minutes without respond it showed only "Please check the log before rebooting into system" so I disconnected phone. When I try to start, it only shows sony logo for a short while and then it resets, and shows it again and resets... I can only reset it by holding vol+ and power button until it vibrates 3 times, then I can put it in fastboot mode.
Please tell me, what should I do now. And sorry for my bad english.
Flash stock, flash the boot.img in fastboot mode, reboot and flash the zip.
If you did not copy the zip yet boot after flash and copy.
Thank You very much. Everything works fine now, excepting data access via mobile network. I'll try to find the answer in another thread. Thanks again!

Unable to boot correctly

Hi all,
I've been trying to downgrade my M4 to 26.1.A.1.128 so I can unlock the bootloader, root and install custom recovery and I'm getting a very strange issue.
Using flashtool I've been able to flash with no errors however when the phone boots it instantly freezes and then restarts infinitely.
I've tried re-flashing the whole rom again with no avail and just re-flashing just system and kernel with the same issue. I can seem to find anything that will bring it back to life.
Thanks for your help
right, nevermind.
I used the PC companion repair option and it's fixed it and kept me on 26.1.a.1.128

I might have bricked my phone (XA Ultra Dual - F3216) - it gets stuck when booting...

I followed this guide:
https://forum.xda-developers.com/xperia-xa/how-to/f31xx-how-to-root-xperia-xa-noob-t3430170
With some specific files (boot and recovery images) from here:
https://forum.xda-developers.com/xa-ultra/how-to/how-to-root-xperia-xa-ultra-dual-t3439173
The rough steps that I took:
Put the UPDATE-SuperSU-v2.76-20160630161323.zip in the microsd
Unlocked the bootloader
"fastboot flash boot boot.img" and "fastboot flash recovery recovery.img"
Booted into TWRP
Since the internal data was shown as (0) , I Wiped the device.
Installed SuperSU-v2.76 from the microsd
Rebooted the device
It did an automatic reboot after going through the logos (I guess this part is expected after installing SuperSU)
After that, it gets stuck on the Xperia logo (the video logo keeps playing)
Now, after I turn on the device:
It goes through the Sony logo
It goes through the Android logo
It gets stuck on the Xperia logo (while playing the logo)
It doesn't get passed the Xperia logo.
Things I can still do:
I can boot into TWRP recovery (yay?)
I can use adb sideload with TWRP
I can't yet get back into fastbood mode, but I guess I can if I keep at it. I could go to fastbood mode before, but for some reason I can't anymore. I think it has to do with drivers. By default it recognizes the device as "SEMC flash drive" and will not recognize it as fastboot. After about a minute or so, it will disconnect the "SEMC flash drive" and boots the phone.
Give it to me straight, is my phone actually bricked?
If not, please let me know what I can do to fix it. It is very much appreciated to hear from anyone about this. Thank you all in advance.
If you need any additional info (logs, phone details, etc. etc.) feel free to ask me and I will happily comply.
If you can't get through the bootanimation, then yes that's kind of a soft brick. A solution would be to flash an official firmware from xperifirm (preferably .100 or .111 in order to to install root successfully) and then get everything done with simple baby steps. After flashing, you can wipe your data (if you wanna), reboot and then install root (I do not recommend flashing supersu and wiping at the same time when using an official firmware).
Note: Because we are stuck with only official fws, boot and recovery files can only work on specific fws
sexxualization said:
If you can't get through the bootanimation, then yes that's kind of a soft brick. A solution would be to flash an official firmware from xperifirm (preferably .100 or .111 in order to to install root successfully) and then get everything done with simple baby steps. After flashing, you can wipe your data (if you wanna), reboot and then install root (I do not recommend flashing supersu and wiping at the same time when using an official firmware).
Note: Because we are stuck with only official fws, boot and recovery files can only work on specific fws
Click to expand...
Click to collapse
Hey
Thanks for your reply on my cry for help.
So basically get the firmware from Xpeifirm, make sure boot is working fine (basically back to square one ... sorta), then root by installing the SuperSU again. right?
I had already looked at Xperifirm before this. but I couldn't figure out how to properly use it. and now I'm a bit stuck.
I followed these:
https://forum.xda-developers.com/cr...xperifirm-xperia-firmware-downloader-t2834142
https://www.youtube.com/watch?v=X_Y-BOWlQdw
But when I follow the steps, I get stuck here (when creating the bundle using the bundler in flash tools) :
http://imgur.com/a/wl3Cc
Any ideas on how to proceed?
Also another question. Can I get away with using adb sideloader instead of flashtool? some driver problems that are bugging me ...
Appreciate your response and thank you so much!
sony- android- xperia- off
good day! i hope im on the correct thread. i am having this issue on my xperia xa ultra dual.
everytime i turn the device on, it displays the sony logo, then the android logo, the xperia logo, then it turns off. i cant seem to get past through this regardless if i'll press the volume- and power or the volume+ and power. im almost certain that this can be fixed by doing something on the flashtool. i guess i just dont know how to do it. a step-by-step tutorial is greatly appreciated.
Can you get it into fash mode? If you can just flash ftf file for your phone.
Sent from my F3213 using xda premium
mchlbenner said:
Can you get it into fash mode? If you can just flash ftf file for your phone.
Sent from my F3213 using xda premium
Click to expand...
Click to collapse
hi. thanks for the response! i tried to flash the stock ftf for my f3212 and now it doesn't boot at all! T___T it will only show a steady red light if its connected to the PC.
Unfortunately this is a known issue when flashing after only red light when plug in for charging.
If you are under warranty send in for service their no known fix for this.
It happened to me I junk it.
And got another one.
Sent from my F3213 using xda premium

Recovery from a hard brick using Flashtool

Hi,
I flashed a wrong kernel with a stock ROM with Flashtool and when I tried to boot my tablet, it instantly shut down. Now the device doesn't boot, doesn't charge, and I can't switch to flashmode nor fastboot mode. The LED remains black.
I assume that is seems like a hard brick...
I want to flash a stock ROM with a stock kernel in order to recover it. But since I cannot switch to fastboot mode I can't flash using Flashtool. Have you ever encountered the same kind of problem ? How do you usually do ?
Any help may be very appreciated. Thank you.
Well, I just made the same mistake... any help will be very appreciated

Categories

Resources