Related
This is a more detailed edited version of how to install the Resurrection ROM by westcrip...
as have seen too many users that seem to be skipping parts or confused of the installation.
This is also for users like myself, who just started on this site and can't post on Development side to find their answers.
BACKUP your apps of course...but DO NOT backup system data.Repeat!! DO NOT BACKUP SYSTEM DATA. Restoring system data can give you some problems because if you don't know what you're doing, can accidentally replace something from the fixes that screws things up!
-----------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------
PART-1
Rom Installation (you MUST follow these steps! )
**Go to recovery mode( Vol UP + Power+ Home and hold until the Samsung Galaxy screen comes on)
1- Wipe data / Factory reset then (can Wipe cache partition or go straight to)
Install ResurrectionV1.1_official_remix_ics_4.0.3_XXLPE_FULL-WiPE.zip
*if you did not Wipe cache, can go straight to install from cache...
but if you Wiped cache then you go to install from external SD card and install 1.0_CWM.zip (this will be touch version)...
then choose - install zip from sdcard. - choose zip from sdcard. Scroll down to Download folder and select ResurrectionV1.1_official_remix_ics_4.0.3_XXLPE_FULL-WiPE.zip.
Please wait a moment.
2-Install gapps_for_remix_v1.1.zip
3-Install gapps_fixer.zip then go back and go to Advanced.
4-Wipe dalvik cache (required)
and Fix permissions and go back to
5-Reboot system
(at this stage it may take a while for first bootup, because we have wiped cache. It needs to rebuild it, so don`t panic.
It may take a while *average around 3-5min before getting to Installing applications screen)
At this stage, boot to system and configure the phone (change language settings, etc).
When finished, again reboot into recovery and follow PART-2
PART-2 (required)
This part it's mandatory here are contained the language, theme, AOSP apps and the T9 dialer if you want it...
or use default. ONLY install one of these:
*note: you're in regular CWM using up and down volue + power button to enter.
If you want the touch - reinstall it like before.
1.- Install the SMSfixupdate-afterboot+T9 Dialler.zip
or
SMSfixupdate-afterboot+default remix dialler.zip
go back
2.- Reboot into system
After finishing the boot it's highly probably that you receive a force close from android phone.
It's normal and it's the only FC that you should get.
Enjoy!
**There is a RAM Manager Fix (When you open the Task Manager app, there's a section called RAM and a button to Clear Memory.
The fix enables that button again... for those not working).
Here is a mirror link for this and other files: RAM Manager Fix and others
PART-3 (optional)
*This can apply to many other files you want to flash.
If you want to install Siyah kernel:
Place Siyah-v3.0rc4-CWM.zip (or whichever version you're using) in the root of internal SDcard memory ("download" folder) and go to recovery mode (Vol Up + Power + Home).
Go to Install zip from SDCard... and select it.
Yes and install... Fix permissions... Reboot.
**battery issues with Siyah?
go to recovery
wipe dalvik
go to "kernel specific options" to reset them or other performance tweaks.
reset kernal
fix permission
reboot
**No more video player?
Get the VideoPlayer.apk file (*have to do a search for it now until I find another working link to it)
and copy it to system/app using something like Root Explorer
Reboot
Hope this helps. I'll edit this when I have time (usually busy with other projects).
*Version 1.2 is out now Check it here.
Good job
Tho make sure you spend a bit of time regularly checking the thread (depending on how much action the thread gets, obviously). Once you make threads like these people invariably ask questions & it's best if the person who detailed the method answers most of them.
Thank you sir.
I will give as much time as I can on this, when questions come up... and I'll be sure to keep up with bugs going on on original thread... though they will be updating this ROM soon to 4.0.4.
When that happens, guess will have to update this lol.
(oh no, what have I gotten myself into )
Language problem
Hello!
Thanks for the thread, really useful for noobs needing help to fix some problems.
I am a noob... and I have a problem.
Everything is working fine, battery is ok, no fc... but language seems to be messed up, I get my language (spanish) in almost all settings and menus, but dialer is invariably in english. Some contacts dialogs show this behaviour too.
Thank you very much in advance!
Thanx a lot, really useful...cant wait for 1.2
SMSafter-reboot is the only fix i needed to fix my dialer fcs issue, after a dalvik cache clean and permission fixing. That was the only way, if some1 has same issue.
Sent from my GT-I9100 using XDA
Hi Miguel. The ROM is mostly for English and some language settings are off here and there. Mine too shows Chinese characters in some parts. I think this has to do with where the phone is originally from.
Version 1.2 will be out soon (based on 4.0.4) and should have more bugs fixed. I will see if there's anything can be done to help you with Spanish settings.
*glad it's helpful for you guys.
Thanks for a good simple guide.... it is getting pretty difficult to find answers with so many posts in the main thread.
Will you be making a similar step by step guide for ver 1.2 that should be out soon?
If it is needed I will. Will have to wait for it to come out and see if instructions changed. The process will be easier (after what westcrip said), not needing to add gapps fix, etc now I think.
Anyways, if I think needs more detail for newer users, I'll add a new thread for it and post a link here to it too.
Which dialler
I'm a true noob and I'm rooted with CWM installed and I'm giving serious consideration to this rom. My only question at this point is what are the differences btw the 2 diallers and do most folks prefer one over the other?
Hi tlmacson. It's a very good fast and smooth rom with good support. 1 dialer gives you T9 abilities... which means when you start dialing some number, it shows you contact(s) that much those numbers.
But there are some bugs in it not working for some, so recommended to install the default one and add some other app that does the same, or install T9 on after the default.
PS
If you want to give this ROM a try... the new 1.2 version will be out any moment which should have easier installation with hopefully less bugs ^^
I have been using it for a few weeks now. It has run really smooth, the only bugs are very small and do not effect the use of it daily.
I had a few problems with the dialler, so I installed exDialler. I actually prefer it, it has t9 searching and can be skinned to look like ics dialler.
I will definatly give ver 1.2 of the rom a try too.
Yes, that's the 3rd party app people like for T9 use: exDialer
It also allows you to give it black theme.
HELP!
Cyber i'm wondering if you did test the 1.2 PRO resurrection I want to upgrade to it but i don't know if it is a FULL WIPE or not because westscript didn't mention it also there are no GAPPS and FIXER within the thread can you please confirm for me this?
I think that I may just do that since I'm not having any real issues with the leaked "stock" XXLPQ. I appreciate your advice and dialer explanation.
nHorus - For v1.2 it works better if you do a full wipe Do a full wipe(factory reset+cache+dalvik cache), though you can try without it.. and just do the factory reset. Then install ROM and Siyah kernel and reboot to do initial setup. Then comeback to recovery mode and install navigation button fix and app themes, reboot.
Test
Thank you cyberboob.
I will try 1.2 and see how it goes, anyway I will install exDialer to fix my languages "problems" (it is not a dealbreaker but is disturbing seeing some dalogues in other language).
According to 1.2 changelog this version is promising.
cyberboob said:
nHorus - For v1.2 it works better if you do a full wipe Do a full wipe(factory reset+cache+dalvik cache), though you can try without it.. and just do the factory reset. Then install ROM and Siyah kernel and reboot to do initial setup. Then comeback to recovery mode and install navigation button fix and app themes, reboot.
Click to expand...
Click to collapse
thank you. i'll try without the wipes
Sorry.. a full wipe is needed again (or more bugs will be present).
Follow these steps:
Do a full wipe(factory reset+cache+dalvik cache)
Install the Main ROM
Install Siyah-v3.0.1-CWM.zip
Reboot
Do the initial setup of things
Go back to CWM and install navigation button fix
Reboot
Then go back to CWM and install app themes (there are some bugs, but if you want the black themes, then install classic first, then black)
Reboot
Some people have other issues after, but see how this goes.
I would change the DPI settings to 184 or 210 for everything to work fine from market apps.
*Also westcrip will post a new fix update for some new bugs reported by some users.
cyberboob said:
nHorus - For v1.2 it works better if you do a full wipe Do a full wipe(factory reset+cache+dalvik cache), though you can try without it.. and just do the factory reset. Then install ROM and Siyah kernel and reboot to do initial setup. Then comeback to recovery mode and install navigation button fix and app themes, reboot.
Click to expand...
Click to collapse
I know I'm showing my "noobness" but I thought that the kernel was part of the ROM; so how do I install the kernel after the ROM?
Same way you installed the main ROM.. go into recovery mode and select the folder you placed it in (usually internal sd card "download" folder) and flash it "yes". Fix permissions if want and reboot. Same with anything else you need to flash/CWM after/before.
1 - first you have to be root and install bootmenu ..
2 - download the 3 files darkui + rom + UNDERVOLT and install the rom
LINK : http://www.grupoandroid.com/topic/84882-jelly-bean-412-artmod-v43-final-392013-bateria-y-velocidad/
TIGHTEN THE THANKS BUTTON ..
2.1 We WIPE our current Rom from Mounts & Format and from Wipe & Clean
format System
We all Wipes
2.2Flasheamos ROM is in the " ROM" from Install Zip :
Install a zip packa
2.3 flasheamos the darkui.zip
2.4 reboot
- If one of those does not start the ROM and we have the black screen for 10 secs press Power + Vol ( - ) to restart , and when we back out the Droid , we click on it, then go to Settings , and the slot where we installed the ROM , and found that we have marked the boxes :
Custom init ( 2nd -init ) [ S ]
Insecure adb [ S ]
3 - Waiting to turn on the rom to install the motomizer
link: http://www.mediafire.com/download/dqa0ciciz8gx7uz/Motomizer_Expert_Edition_5.6.2.apk
open the application and go to optimize and one- touch push optimizer
I will ask you to restart your phone put so.
4 - lowering link2sd the play and going to freeze all applications appear that if the next excel
if not used it is never easy to squeeze in the application they want to put actions freeze
link the excel :https://docs.google.com/spreadsheet/ccc?key=0AsM6cYC-SdW-dDh3a0ktYi13TERGWlFUS0x3blNTLUE#gid=0
5 - restart the phone and enter the recovery from bootmenu ....
install the zip file UNDERVOLT
turn on the phone and already put the UNDERVOLT not going to see
no application or anything are factory settings are not
6 - it's time to lower the donation greenify no applications open in the background and do not spend
no battery or resources on the microprocessor
link: http://www.taringa.net/posts/linux/17103324/Greenify-Donation-Version-2-1.html
xposed link ( you will need for full greenify ) http://forum.xda-developers.com/showthread.php?t=1574401
sorry for my English ... I hope that helps some and you help me so I can sign in rom.
FOR ME THE BEST FOR OUR RAZR convinación
thanks for your faq, i am just trying it...
one thing i did not understand is the point 4. -> "4 - lowering link2sd the play and going to freeze all applications ..."
What do you mean with that ?!?
Do i need an special Software to freeze this applications?
First i thought i have to greenify this apps , but somewhere else i saw that they freeze the appz with App Quarantine Pro .
any hint?
For Samsung Galaxy Note Edge SM-N915F. and SM-N915FY. Someone confirmed that is working also on N915G.
I’m not a developer. I made this ROM for my hobby.
ROM Based on
Model: SM-N915F (Snapdragon)
Country: Israel
Version: Android 5.0.1
Product Code: Multi CSC
PDA: N915FXXU1BOD5
ROM Features
Build on the latest stock ROM N915FXXU1BOD5
Deodex, Zipalign, Knox removed, Themed
Root Supersu v2.49 and busybox Stericson v1.23.1
CSC & build.prop mods
Credits
@gharrington and 3minitTeam for 3mninit battery settings
http://forum.xda-developers.com/show....php?t=2799958
http://forum.xda-developers.com/show....php?t=2650117)
@justarchi - For the ArchiKitchen
@Chainfire - For Superuser and a bunch of things http://forum.xda-developers.com/show....php?t=1538053
@TBO , @Train88 & @djdarkknight96 for the blackout apps
@kmokhtar79 for different mods
@viper520 @zhuhang for Viper4AndroidFX http://forum.xda-developers.com/show....php?t=2191223
@Albe95 for his port apps
@AL_IRAQI for his tutorials
@thanhfhuongf for the full screen InCallUI
@ksr007 for the themes apk
@daxgirl and @bobcat for their help and advices
@ XDA community for their support
@raffaele88 for his help and support
@rovo89 and @arter97 for Xposed
[FONT="]@Dominik for Adaway[/FONT]
@ pass2001 for his beautiful bootanimations. You can thank him here
Please pm me if I forgot some Dev
[FONT="]New ROM v4.0 - 20.06.2015
[/FONT]
[FONT="]DOWNLOAD LINK v4.0[/FONT]
[FONT="]
Changelog v4.0:[/FONT]
[FONT="]<*>N915F-Y Lollipop release v4.0</*>[/FONT]
[FONT="]<*>Official base 5.0.1 - N915FXXU1BOD5</*>[/FONT]
[FONT="]<*>Aroma ROM</*>[/FONT]
[FONT="]<*>Black Material background in Settings</*>[/FONT]
[FONT="]<*>Black apps included: My files, Music, MMS, PlayStore, GMail, Chrome, etc</*>[/FONT]
[FONT="]<*>50% transparent black background toggles</*>[/FONT]
[FONT="]<*>5 way power menu with black background</*>[/FONT]
[FONT="]<*>Removed SFinder & Quick Connect</*>[/FONT]
[FONT="]<*>Many S6 apps to chose from: Launcher, keyboard, MyFiles, Gallery, etc</*>[/FONT]
[FONT="]<*>S6 Edge keyboard with secondary symbols</*>[/FONT]
[FONT="]<*>Full screen caller id</*>[/FONT]
[FONT="]<*>Viper sound, Xposed Framework, 3MinitBattery v3</*>[/FONT]
[FONT="]<*>SeLinux Permissive kernel</*>[/FONT]
[FONT="]<*>Nice lockscreen and Home wallpapers</*>[/FONT]
[FONT="]<*>Very nice bootanimation: 7 minimal, avengers</*>[/FONT]
[FONT="]<*>Removed ROM signature verification</*>[/FONT]
[FONT="]<*>Added App Permissions and App Autostarts in Settings</*>[/FONT]
[FONT="]<*>Center clock, no wake-up on power connect/disconnect</*>[/FONT]
[FONT="]<*>Multi CSC</*>[/FONT]
<*>Various build.prop tweaks</*>[FONT="]
To install this ROM you have to follow this:
1. Use Titanium or any other sw to backup your contacts, sms, favorites and any other personal files
2. Boot into CWM / TWRP recovery and do your usual nandroid backup.
3. Flash the Flash_me_first_I_will_fail.zip which will fail. Don't worry, is ok. If you don't flash this, your Aroma will not start. TWRP users reported that they could flash directly the ROM without the fail file.
4. Flash the ROM and make your choices in Aroma. Please click on items you want even they are already selected. If not, you could end up with missing apps after reboot even you sow them selected. Sometimes, there are some visual glitches and you'll not be presented with the final reboot screen. If you see that the process is stuck for more than 5 minutes, it means that the final screen is not presented visually and you have to press twice on the low right side of the screen (just below the progress %) and your phone will reboot normally. Don't worry, the ROM is flashed correctly.
5. First reboot will take ~7-10 minutes. Just wait patiently.
6. After you setup your ROM, make all the updates from PlayStore and Samsung Apps Store if any (I used the latest apks), update SuperSu binary and reboot your phone. After this reboot you will see also the AdAway icon in your app drawer. Start the app and update it.
7. Enjoy the ROM and give feedback.[/FONT]
[FONT="]
I take no credit for this source; I have only compiled it and built it with some added tweaks and mods.
All credit for this ROM goes with those who shared their knowledge on XDA.[/FONT]
starbucks2010 said:
I succeeded to deodex, root and zipalign the NK5 firmware for SM-N915F (CSC SER) with the Kitchen but it doesn't seem to install.
I tried to install it from CWM but it goes very fast thru the installation (~ 5 secs) and says installation finished.
I highly doubt that it's installing anything in those 5 secs.
If someone want to have a look in the updater-script to find what is wrong I'll be very grateful.
If someone wants to try the ROM I'll upload it somewhere.
Thank you.
Click to expand...
Click to collapse
Try to install it twice in a row. Send me the link I'll look at it and send it back to you. I cannot install it tho as I have the SM-915T. I just saw your link I'll look at it tomorrow sometime and send you back one that should work.
Here is the link: https://mega.co.nz/#!WR1kBYLI!LOsSS0zBCsDdtiAJsmURqsk_9W3cvjNJd--kBzKgvQU
Please be aware that the ROM is not booting!
Hi man.
Do you progress in your work?
thanks
Sorry, but no progress.
I was busy with my work and there is no one to help me with the updater-script.
Ok.
I already have this problem on my note 3.
Try to do a factory reset manually and install your rom after. Sometime,the script dont delete system and after, no enough space in system
What ROM base do you have now: NJ8 or NK5?
NK4. It's for 915FY
Have you tried to flash this ROM?
I suspect that it didn't work for me because I was on NJx base not on NKx.
and compatible with this rom 915FY '?
Install Diskinfo from playstore and check what partitions you have for cache, userdata and system.
For 915F these are: cache - mmcblk0p25, userdata - mmcblk0p27 and system - mmcblk0p24.
So, if you have same partitions ad N915F then yes, is compatible.
Good luck.
I finally managed to make a working cwm .zip of NJ8. I will try to make one also for NK5. If someone wants it just say it.
Maybe later, I'll add some mods to it if I'll find some free time.
Happy New Year to everyone!
ROM link up in OP.
sorry but this rom and compatible x SM-N915FY?
I don't have the N915FY but I think that should be ok because they have the same HW.
If you want to try, please make a nandroid backup of your ROM first. Let me know if it works.
Good luck.
ok then I do the backup and then try the rm and let you know what prog ... I can use x to backup?
First of all you need to be rooted. Are you rooted?
Once you are rooted, install Chnglu's CWM from the link in OP. After CWM installation, you can reboot your phone in recovery (shutdown the phone, press vol-up + home + power button) and perform the nandroid backup.
Good luck.
Dont work on 915FY. bootloop in note edge screen.
I cant take a valide boot.img from 915FY for put into your rom.....
After flashing the ROM, before the reboot, restore your boot from the cwm backup. It could work.
Good luck.
micky387 said:
Dont work on 915FY. bootloop in note edge screen.
I cant take a valide boot.img from 915FY for put into your rom.....
Click to expand...
Click to collapse
starbucks2010 said:
After flashing the ROM, before the reboot, restore your boot from the cwm backup. It could work.
Good luck.
Click to expand...
Click to collapse
@micky387, does that help and is the FW now running!?
MIUIv5 4.11.28 for the beloved CANVAS KNIGHT A350
Ported from the adria rom for REDMI NOTE 3G - Thanks to BALCANGSM for his amazing rom!
Features -
1. All the usual MIUI v5 features with a toolbox* as a bonus.
2. Fast, reliable, daily use rom.
3. Flash Crossbreeder and see the magic!
Bugs -
1. In toolbox, dont switch the main storage. It will brick the internal storage mount points and you will have to flash the rom again.
2. Upon first boot, lockscreen isn't working. To fix it, bring down the status bar and open settings and then press the home button to go to the launcher, then go to themes app and install any other theme and the lock will work just fine.
The problem is not with Lock, its with the miuiv6 theme so don't cry.
3. Latest version of google maps is not working, download the apk from http://d-h.st/Cmi and install it just like any ordinary apk but remember to uninstall previously installed google maps app. Thanks to @hell1134 for this solution.
Instructions -
1. Reboooooot into recovery, I prefer CWM and make a backup.
2. Factory reset. Delete Cache.
3. Go into mounts/storage and format data, system, and cache partitions.
4. Format dalvik-cache, just in case.
5. Flash the downloaded rom and reboot.
6. (OPTIONAL) After two three boots, flash Crossbreader for amazingly ultimate speed boost.
Download-
https://drive.google.com/folderview?id=0B_Dd-va66GscQzI1M3hGLTdoOFk&usp=sharing
Press thanks if I helped.
XDA:DevDB Information
Micromax Canvas Knight A350 ROM, ROM for the Android General
Contributors
parasthakur37, balcangsm, helloansuman
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: MIUI
Version Information
Status: Stable
Current Stable Version: V1
Created 2015-01-15
Last Updated 2015-02-14
Can u plz give me the link for how to root and cwm or twrp or any other recovery..
Sent from my Micromax A88 using XDA Premium 4 mobile app
Which mobile?
Canvas Knight of course.. Y i would ask here
Sent from my Micromax A88 using XDA Premium 4 mobile app
Hello Everyone,
Below is just an addition to the OP
Credits :
Parathakur for porting the miui
Micromax for this awesome phone
Xiaomi for their amazing MIUI
More Detailed way to install this ROM.
Prerequisites :
Download the Rom and save it on the internal SD Card(Storage memory)
STEP 1
First of all root your phone-(This is only for canvas knight running KK 4.4.2)
Use the below link to root you phone by installing custom recovery-TWRP/CWM
skyneel.com/2014/07/How-to-root-Kitkat-version-of-Micromax-A350-Canvas-Knight(Add www and .html as i am unable to post links)
Once rooted reboot the phone to verify if you have root access (Updated supersu binaries if prompted to).
STEP 2
Power off the phone and follow the below steps to reboot to recovery.
Hold and press together Volume Up + Volume Down + Power button.
Now you will see menu, where choose option Recovery mode using Volume Up.
STEP 3-Deletion of existing ROM
In here we will be using Volume UP and Volume Down to Navigate up and down in the menu and power button to select.
Now navigate to wipe data/factory reset and delete all the user data( Hoping that you have taken a backup)
Now navigate to wipe cache partition and delete the davlik cache.
STEP 4-Installing MIUI
Now navigate to Install zip from sdcard and select choose zip from internal sd card
Navigate to location where you have saved the Rom and select it wait for completion.
STEP 5-
Once the the installation is complete reboot the phone
It might take a while for the phone to boot at first.
Complete the setup process.
Congratulations now you have miui on Micromax Knight.
Known Issues
Lock Screen Missing
Calendar and Weather icons missing(Icon art)
Fix :
This is the default theme problem hence would recommend to download any other theme to make it work.
Caution
1. In toolbox, dont switch the main storage. It will brick the internal storage mount points and you will have to flash the rom again.
2. Do not activate the pattern lock before changing the theme.(If already done then reboot to recovery and delete the Davlik cache).
Disclaimer
I am not responsible for any damage to your device.. Proceed at your own risk.
HIt Thanks if this helped
Thanks for the update ! i'm downloading & definitely give you all possible reply !!!
Thanks one again!!!!!!
Also the graphics are misaligned especially in music & video app.
plz share snap shot
Oops ... Uninstalled it and reverted to stock
hell1134 said:
Also the graphics are misaligned especially in music & video app.
Click to expand...
Click to collapse
For music use another player from play store and for video use MX player!
Papdya said:
Can u plz give me the link for how to root and cwm or twrp or any other recovery..
Sent from my Micromax A88 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Haha I didn't know anyone would ask that for Knight, just google man, everything's there!
Praful Pradhan said:
Thanks for the update ! i'm downloading & definitely give you all possible reply !!!
Thanks one again!!!!!!
Click to expand...
Click to collapse
You're welcome.
Graphics
hell1134 said:
Also the graphics are misaligned especially in music & video app.
Click to expand...
Click to collapse
Graphics on Music and Video works for me OOB... facing a little alignment problem with Cleaner App
the problem is iam unable to root my device
Death Dealer said:
Graphics on Music and Video works for me OOB... facing a little alignment problem with Cleaner App
Click to expand...
Click to collapse
Okay btw that's not a bug.
abdussamadh said:
the problem is iam unable to root my device
Click to expand...
Click to collapse
Here you go
http://www.skyneel.com/2014/03/How-to-Root-Micromax-A350-Canvas-Knight-by-easy-method.html
off topic can anyone port this rom for Micromax gold
sanjayurloe said:
off topic can anyone port this rom for Micromax gold
Click to expand...
Click to collapse
Once I ported MIUI v5 from Gold to my Knight but it wasn't that impressive in terms of speed. You can flash this on gold and see if it works but first obviously make a cwm backup and have the sp tool and stock rom ready to flash boot.img if your phone stops booting like mine did.
parasthakur37 said:
Once I ported MIUI v5 from Gold to my Knight but it wasn't that impressive in terms of speed. You can flash this on gold and see if it works but first obviously make a cwm backup and have the sp tool and stock rom ready to flash boot.img if your phone stops booting like mine did.
Click to expand...
Click to collapse
I tryedto install this rom without any change . after install on language sellaction screen gone crash and tuch is not working and battery discharging v fast can u tell me how can I fix it I don't know anything about rom porting
Upon first boot, lockscreen isn't working. To fix it, bring down the status bar and open settings and then press the home button to go to the launcher, then go to themes app and install any other theme and the lock will work just fine.
The problem is not with Lock,
>>>> Don't find theme app in launcher setting ......
help me bro @
Fix it
hello guys I share my new rom for the samsung A20 it is compatible with all the variants except the U variant...I am not responsible for dead phones or bad installation do this at your own risk ...
*FEATURES
*Based Samsung S20 Fan Edition
*Support A205xx (less A205U)
*One UI 2.5
*Zipaligned
*Debloat
*Patch September
*Root Magisk(M2D)
*Kernel Minkha 14.3
*Some features of one UI 2.5
*Wallpaper S20 Fan Edition
*MTP Connection (Connect To Laptop via USB Without Any Confirmation Pop Up)
*you can use spotify as added alarm
*Audio enhancements V2 thanks to Yasir
*improvements for better battery life and performance
*Optimization HQM
*Semi deodex in some applications
*Animations S20 Fan Edition
*LiveDrawing in Gallery S20 Fan Edition
*Wireless PowerShare Add
*Link to windows Add
*GPU Booster improved
*fixed error when saving contact
*Other things I don't remember now
*IMPORTANT
The rom is more focused on optimization, fluidity and performance, it has a very deep debloat and some functions are lost that I did not see as very necessary. I clarify this so that later, no complaints, the rom is working very well and without errors.
*HOW TO INSTALL
start in twrp and make wipes
flash ROM
installation takes about 2 to 3 minutes
enjoyment
*BUGS
let me know
*DOWNLOAD ROM
https://androidfilehost.com/?fid=8889791610682941931
*FIX
download and unzip the zip fix and add the apk in system / app and grant the necessary permissions
https://androidfilehost.com/?fid=8889791610682942252
*CONTRIBUTION
@minhka98
@Soul_broker_1441
*Paypal https://www.paypal.me/gollo11
PayPal in case you want to donate a coffee to me
nice!
Upgrade from Zrom v3 to v4 on a20
https://forum.xda-developers.com/galaxy-a20/development/z-rom-q-v4-t4166017
Before you start copy files from internal to SD card and unzip the fix.zip
1. Backup data
2. Wipe caches, boot, data, system
Install Rom
Copy fix files to system/system/priv-app
3. Format data
4. Install dmverity
5. Wipe caches
6. Reboot to recovery
7. Reboot
8. Wait a long time
9. Skip everything
10. Reboot to recovery
11. Restore data
12. Reboot
I might give this a go later today. Thanks!
might give this a try first. i haven't even tried flashing any customization on my A205GN yet. still on stock debloated and rooted android 10
What is the difference between Z-ROM Q V4 and Z-ROM Q V3
The WiFi hotspot login page not show.
Upgrade from Zrom v3 to v4
1. Backup data
2. Wipe caches, boot, data, system
3. Format data
4. Install dmverity
5. Wipe caches
6. Reboot to recovery
7. Reboot
8. Wait a long time
9. Skip everything
10. Reboot to recovery
11. Restore data
12. Reboot
Nice bro, will try later, though hope Sir @Gullo consider bluelight filter, adaptive brightness and possibly dynamic lockscreen wallpaper
Upgrade from Zrom v3 to v4 on a20
https://forum.xda-developers.com/galaxy-a20/development/z-rom-q-v4-t4166017
Before you start copy files from internal to SD card and unzip the fix.zip
1. Backup data
2. Wipe caches, boot, data, system
Install Rom
Copy fix files to system/system/priv-app
3. Format data
4. Install dmverity
5. Wipe caches
6. Reboot to recovery
7. Reboot
8. Wait a long time
9. Skip everything
10. Reboot to recovery
11. Restore data
12. Reboot
Does the ROM have AOD (always on display)?
walisson836 said:
Does the ROM have AOD (always on display)?
Click to expand...
Click to collapse
This ROM is debloated.
Use Ultimate Q if you want AOD
https://forum.xda-developers.com/galaxy-a20/development/ultimate-q-s20-v2-rom-t4104667
can't update to magisk 20.4? bootloop after flash on 20.4.
sinkoo1979 said:
can't update to magisk 20.4? bootloop after flash on 20.4.
Click to expand...
Click to collapse
You need to change kernel to one that uses 20.4
Flashed success and well debloated ROM. tried flashing other custom kernel and update magisk always ended with bricked phone.
Just finished rebuilding phone on Australian Sept update ROM and then installing Z-Rom V4 and Eureka V4.3 kernel with Magisk 20.4.
Everything is working as expected. Eureka v4.3 can run magisk 20.4 from the word go.... no need to install 20.3 first... just install kernel and magisk 20.4 in one hit. No bricks providing you do the FORMAT (not wipe) /data and dmverity straight after install of Z-ROM.
V5 coming soon
physwizz said:
V5 coming soon
Click to expand...
Click to collapse
Please could you confirm this error in phone app. Go to phone app/recents tab, click any recent call to show call details/history the phone app crash after few seconds. Thanks
SHEHUU3 said:
Please could you confirm this error in phone app. Go to phone app/recents tab, click any recent call to show call details/history the phone app crash after few seconds. Thanks
Click to expand...
Click to collapse
Yes
This happens to me too
physwizz said:
Yes
This happens to me too
Click to expand...
Click to collapse
Hope it will be fix in the next version.
Otherwise the rom is very smooth even with the default kernel