Related
Or maybe it did, but not the way I expected.
So, I've had my Vibrant for about 4 days. Day 1, I rooted it and installed Titanium Backup, which I used to delete a bunch of Bloatware.
Today, I decided to try something different, and wanted to totally wipe the phone clean, restored back to "out of the box" condition. So, I did a Factory Data Reset, via Menu>Settings>Privacy>Factory Data Reset. First I tried the Power Button/Volumn Buttons, but that wouldn't work for me.
Anyway, I finished with the Factory Data Reset and noticed that all of my Market Apps are gone, including Titanium Backup. Funny thing is, I believe the phone is still Rooted, because I still have the Superuser Permission icon. However, none of the Bloatware that I'd deleted, is back on the phone. Of course, since I deleted Titanium Backup, with the reset, I can't access my Titanium Backup that I'd made...lol.
I still want to reset this phone to "out of box" condition, but can't figure out how. I want to delete EVERYTHING, including contacts, music on SD card, and I want everything reinstalled, that came with the phone. At that point, I'm going to do more research, before deleting bloatware. I don't even care if I lose my "ROOT." If needed, I can re-root it.
So, is it possible, to get this phone back to factory condition? First off, this is my first Android and I'm completely an idiot, when it comes to androids...lol. I have no idea what SDK, ADB, or any of those other initials mean, or how to use them. So, unfortunately, I'm going to need to be able to read very detailed, step by step, idiot like, instructions.
Okay, I hope what I just did wasn't an even bigger mistake...lol.
After reading through a couple of threads, I found and tried this hidden code.
djquick said:
That's the one!! Also, there is a thread that tells you what bloatware apps are safe to remove, after you do a back-up, search for that thread and read through it.
On a side note, if you're still learning or never used odin to flash a rom before; there is also a hidden code that is used for factory format. It'll remove all files and settings including the internal memory storage and reformats it. It'll also reinstall the phone firmware from when you took it out of the box. Just go to your dialer and put *2767*3855# and it will perform the factory format for you.
Hope this helps.
Click to expand...
Click to collapse
Nope, didn't make any difference. Seemed to do the same thing as a Factory Data Reset.
So, now I'll await advice...lol.
Far as I know a factory reset won't restore deleted system .apk's which is what you did by removing the bloatware. Only way is to either restore the .apk's you deleted from a backup manually in which you need root to do this, or via complete restore with ODIN and the tarball. If you don't know what either of this means then I would suggest you read a little more on the forum so you don't wind up with a paperweight. Titanium Backup is great at removing the bloatware but it's not meant to restore rom .apk's which is why they don't get backed up (for safety's sake). It'll backup their settings however. Good luck.
returnofsid said:
Or maybe it did, but not the way I expected.
So, I've had my Vibrant for about 4 days. Day 1, I rooted it and installed Titanium Backup, which I used to delete a bunch of Bloatware.
Today, I decided to try something different, and wanted to totally wipe the phone clean, restored back to "out of the box" condition. So, I did a Factory Data Reset, via Menu>Settings>Privacy>Factory Data Reset. First I tried the Power Button/Volumn Buttons, but that wouldn't work for me.
Anyway, I finished with the Factory Data Reset and noticed that all of my Market Apps are gone, including Titanium Backup. Funny thing is, I believe the phone is still Rooted, because I still have the Superuser Permission icon. However, none of the Bloatware that I'd deleted, is back on the phone. Of course, since I deleted Titanium Backup, with the reset, I can't access my Titanium Backup that I'd made...lol.
I still want to reset this phone to "out of box" condition, but can't figure out how. I want to delete EVERYTHING, including contacts, music on SD card, and I want everything reinstalled, that came with the phone. At that point, I'm going to do more research, before deleting bloatware. I don't even care if I lose my "ROOT." If needed, I can re-root it.
So, is it possible, to get this phone back to factory condition? First off, this is my first Android and I'm completely an idiot, when it comes to androids...lol. I have no idea what SDK, ADB, or any of those other initials mean, or how to use them. So, unfortunately, I'm going to need to be able to read very detailed, step by step, idiot like, instructions.
Click to expand...
Click to collapse
did you make a nandroid backup of your system before you made changes.
sabooher said:
Far as I know a factory reset won't restore deleted system .apk's which is what you did by removing the bloatware. Only way is to either restore the .apk's you deleted from a backup manually in which you need root to do this, or via complete restore with ODIN and the tarball. If you don't know what either of this means then I would suggest you read a little more on the forum so you don't wind up with a paperweight. Titanium Backup is great at removing the bloatware but it's not meant to restore rom .apk's which is why they don't get backed up (for safety's sake). It'll backup their settings however. Good luck.
Click to expand...
Click to collapse
Okay, so it sounds like I need to learn how to use ODIN and "tarball?" Not only do I NOT know how to use either, I don't even know what they are! lol. Can anyone point me to a good, idiot proof guide on both of these programs?
Another possible option, maybe. My girlfriend also has a Vibrant, we purchased both at the same time. At this point, her Vibrant is totally "out of box" original. Is there a way that this could help me? Would it be possible to do a Nandroid back up of her phone, and use that back up to restore my phone?
geocepe said:
did you make a nandroid backup of your system before you made changes.
Click to expand...
Click to collapse
At the time, I hadn't even heard of Nandroid, so no. I figured the Titanium Backup would do what I needed. Unfortunately, I was wrong. Since then, I've heard of Nandroid, but that's about it.
Okay, so I called my local T-Mo store and spoke with a salesman about this issue. Believe it or not, he actually recommended that I call Customer Support and get a warranty replacement, telling them that my volumn buttons aren't working. Honestly, I don't feel right doing this and would like to fix it on my own, errrr, with lots of help from here...lol. The bonus of fixing it myself would be that I'd also be learning how!! As I said, I know next to nothing about Android phones, so would like to learn.
At this point, I want the phone totally back to factory settings, and then I plan to do a lot more research, before making any changes.
Oh and in case it needs to be mentioned again, my phone is still Rooted.
if you download clockwork there are recoveries that will take you back to factory default. if you look in the devs part of the vibrant forum. then look in the Vibrant directory. there are stock backups in there.
did you install any roms? like eugenes or what ever after you rooted?
geocepe said:
if you download clockwork there are recoveries that will take you back to factory default. if you look in the devs part of the vibrant forum. then look in the Vibrant directory. there are stock backups in there.
Click to expand...
Click to collapse
Okay, so Rom Manager includes Clockwork right? I have installed Rom Manager. In the Market, I see Clockwork, but it doesn't look like a US version, as the price isn't in $s.
As for a stock back up, couldn't I just back up my girlfriend's Vibrant, which is in stock condition, and use that back up, to restore my phone? If so, what steps would I need to take, to do so?
98classic said:
did you install any roms? like eugenes or what ever after you rooted?
Click to expand...
Click to collapse
No, I wouldn't even know where to begin, in installing different ROMS...lol.
in vibrant general if you go to tips and tricks you can download the app there. it will tell you step by step what to do. so download it on the good vibrant and make the backup. then download the app on the bad one. take the backup from the good one and put it on the bad ones internal sd card. follow the steps to restore the backup. this may fix your problem
geocepe said:
in vibrant general if you go to tips and tricks you can download the app there. it will tell you step by step what to do. so download it on the good vibrant and make the backup. then download the app on the bad one. take the backup from the good one and put it on the bad ones internal sd card. follow the steps to restore the backup. this may fix your problem
Click to expand...
Click to collapse
Ummm, in your quote, I made something bold. Which "the app" are you referring to?
Also, once I've made a backup of the "GOOD" Vibrant, how do I move that Good Backup to the internal SD Card of the "BAD" Vibrant?
this is for the app.
How it works: The recovery is packaged as an update.zip that you run from STOCK recovery. The update.zip unpacks Clockwork Recovery onto the ramdisk and restarts recovery. When you reboot, it reverts back to the original, unmodified, stock recovery. So, you will need to keep the recovery on the root of your SD card as an update.zip, and apply the zip every time you want to start Clockwork.
HOWEVER, if you use ROM Manager, all of the recovery installation and management instructions are done for you!
Installation instructions:
Download ROM Manager from the Market.
Flash Recovery.
Choose Vibrant as your phone.
Accept the Superuser prompt.
On the very FIRST boot of Clockwork, you may need to manually select "reinstall packages" if Clockwork does not start. You should only ever have to do this once. It will be automatic from then on.
Watch the backup go!
That's it! This is completely painless and safe! There is no need for Odin anymore to replace the recovery or flash updates!
If you appreciate my work, please buy the Premium version of ROM Manager!
To transfer the recovery over transfer it to the external sd card of the good unit. then take that card and put it in the bad unit. then transfer it to the internal sd card.
FYI - I just updated my T-Mobile SGS2. After the wipe and update, I'm unable to re-setup the application because I can't get another Serial and Activation Code from the SWTOR website.
Later I reloaded a custom ROM and tried to restore the app with Titanium, but I keep getting an "An unexpected error has occured."
So in short, if you are expecting an update for your phone, or load custom ROMs a lot, DO NOT USE THE ANDROID AUTHENTICATOR APP (until those awesome hackers find out what going on).
Fortunately I was rooted and able to restore a full system backup, to get the app back running correctly. But now I'm forced to run an older version of software on my phone.
Hopefully CS can help with a better solution or App.
I wrote down the key information I entered into the app when I set it up. I don't know if that will work later on though.
The other thing I have going for me... is that both my phone and tablet are configured for it. I did them both at the same time. That way, if one device is lost or stolen, or gets wiped, I can rely on the other.
khart1978 said:
FYI - I just updated my T-Mobile SGS2. After the wipe and update, I'm unable to re-setup the application because I can't get another Serial and Activation Code from the SWTOR website.
Later I reloaded a custom ROM and tried to restore the app with Titanium, but I keep getting an "An unexpected error has occured."
So in short, if you are expecting an update for your phone, or load custom ROMs a lot, DO NOT USE THE ANDROID AUTHENTICATOR APP (until those awesome hackers find out what going on).
Fortunately I was rooted and able to restore a full system backup, to get the app back running correctly. But now I'm forced to run an older version of software on my phone.
Hopefully CS can help with a better solution or App.
Click to expand...
Click to collapse
You can't restore the data files from an different rom, delete the data files in titanium backup and the app should work again (you just have to configure it again)
Gesendet von meinem GT-I9100 mit Tapatalk
wooki said:
You can't restore the data files from an different rom, delete the data files in titanium backup and the app should work again (you just have to configure it again)
Gesendet von meinem GT-I9100 mit Tapatalk
Click to expand...
Click to collapse
yes but what ur not getting is that in order to set it up again u have to be able to log into ur account which u cant do without a security key
I havent checked yet, but i will soon. Is there a way to shut off the security key (temporarily, of course) so that we can just shut it off, load a rom, turn it back on and "re-marry" the app? Might not be great for nightly users, but I'd like to try some different roms without losing the ability to play my game.
Psionfenix said:
I havent checked yet, but i will soon. Is there a way to shut off the security key (temporarily, of course) so that we can just shut it off, load a rom, turn it back on and "re-marry" the app? Might not be great for nightly users, but I'd like to try some different roms without losing the ability to play my game.
Click to expand...
Click to collapse
The only way to detach the security key atm is to phone support and have them remove it. I read somewhere that adding that functionality to the webpage is a high priority.
yeah. I got my ticket back about that. I went ahead and just ordered a standalone key. Not going to take the chance. haha
There must be a way to backup the application. Moving it to an emulator on my pc would be nice, but I couldn't do it...
Sanraith said:
There must be a way to backup the application. Moving it to an emulator on my pc would be nice, but I couldn't do it...
Click to expand...
Click to collapse
Any news about this?
Successfully Restored Authenticator
I know this post is old, but I've seen several similar posts concerning the same issue, and the resolution was calling Customer Support and having it removed. Anyway, I've restored the app successfully several times today. Last week, I contacted Titanium Track (Titanium Backup Support), and one of the suggestions they gave me led to an answer. "If you leave the app installed and just switch between the ROMs without a wipe, does the same problem happen or not?".
It indeed did continue to function. I then tried a "factory reset" and restoring the app, which led to the dreaded "unexpected error occurred". My next step involved, restoring all system app data/rebooting...and then the authenticator functioned. After a couple of hours, I narrowed down the 2nd app that needs to be restored. Under Titanium Backup it's - [SETTINGS/BLUETOOTH...-> "Settings Storage". By exploring this data using Titanium Backup, I saw one variable that I believe is the cause of the issue. "Android_ID".
Sorry, I can't post the link but this is from "adrynalyne" on Android Forums - "Warning. Do Not Share Nandroid Backups".
Even if your apps aren't there, and no personal information has been entered on a fresh wipe.
If someone asks for a stock Nandroid backup, kindly tell them to get lost
contagous and I learned the hard way. I sent him a completely tweaked and clean nandroid, with none of my personal info or anything like that. He has been using it and it works great.
Until AppBrain fast web installer is used. See, it IDs your device by the Android_ID, which is unique to every phone, or is supposed to be.
Nandroid backups will record this device ID, and clone it onto another device. Well, when contagous installs an app using the web installer, I get it. Without a prompt or nothing.
While I can do the same thing, and it was fun sending him pron apps and sexy men wallpapers, it has a real potential for a security nitemare. I trust contagous, but let this serve as a warning to everyone. Its also not so simple as installing another ROM and factory reset. So far as I can tell, as long as you stay on the same build OS, you will keep the same ID. The only thing that changed my ID to something else was going back to 2.1.
So friends, don't let friends share nandroids. If you do, play it smart, and delete all but the system and boot images and recalculate the md5.
Click to expand...
Click to collapse
I believe that the Star Wars: The Old Republic Security Key app is looking at the Android_ID key for a match, and then bombing out. This is only a theory from my experience. But I would suggest to anyone that's willing to try it to attempt to restore both the SWORSK and Settings Storage "SETTINGS/BLUETOOTH", rebooting, and see what happens. Of course, make a NANDROID backup before trying this!
Cbjohns said:
I know this post is old, but I've seen several similar posts concerning the same issue, and the resolution was calling Customer Support and having it removed. Anyway, I've restored the app successfully several times today. Last week, I contacted Titanium Track (Titanium Backup Support), and one of the suggestions they gave me led to an answer. "If you leave the app installed and just switch between the ROMs without a wipe, does the same problem happen or not?".
It indeed did continue to function. I then tried a "factory reset" and restoring the app, which led to the dreaded "unexpected error occurred". My next step involved, restoring all system app data/rebooting...and then the authenticator functioned. After a couple of hours, I narrowed down the 2nd app that needs to be restored. Under Titanium Backup it's - [SETTINGS/BLUETOOTH...-> "Settings Storage". By exploring this data using Titanium Backup, I saw one variable that I believe is the cause of the issue. "Android_ID".
Sorry, I can't post the link but this is from "adrynalyne" on Android Forums - "Warning. Do Not Share Nandroid Backups".
I believe that the Star Wars: The Old Republic Security Key app is looking at the Android_ID key for a match, and then bombing out. This is only a theory from my experience. But I would suggest to anyone that's willing to try it to attempt to restore both the SWORSK and Settings Storage "SETTINGS/BLUETOOTH", rebooting, and see what happens. Of course, make a NANDROID backup before trying this!
Click to expand...
Click to collapse
Some good news. I requested for the ability to restore the "Android_ID" be added to Titanium Backup, and they have made it so. I tested a couple times and can verify that it is the Android_ID that this app relies on. So for those out there, give it a try if you wish. I should note though that may have to switch the time sync "from auto to manual, then back to auto" to be able to get the site to accept the key. But yes, restoration of the Security Key has been achieved! Good luck everyone!
@Cbjohns
It's working!
I've got nandroid-backup from some months ago, when I used to play SWTOR. Now on the new ROM I couldn't make it working.
So I
1. nandroid-backup this ROM
2. nandroid-restore previous one
3. backup this SETTINGS/BLUETOOTH(only data) and SWTOR app(data+app)
4. nandroid-restore again present ROM
5. restore SETTINGS/BLUETOOTH(only data) and SWTOR app(data+app)
6. reboot(without it, it doesn't work) my phone
-and it's working.
Thanks again!!
I recently got a new phone and had to call support every time I tried a new rom. This has saved me TONS of time, thank you so much!
Cbjohns said:
I know this post is old, but I've seen several similar posts concerning the same issue, and the resolution was calling Customer Support and having it removed. Anyway, I've restored the app successfully several times today. Last week, I contacted Titanium Track (Titanium Backup Support), and one of the suggestions they gave me led to an answer. "If you leave the app installed and just switch between the ROMs without a wipe, does the same problem happen or not?".
It indeed did continue to function. I then tried a "factory reset" and restoring the app, which led to the dreaded "unexpected error occurred". My next step involved, restoring all system app data/rebooting...and then the authenticator functioned. After a couple of hours, I narrowed down the 2nd app that needs to be restored. Under Titanium Backup it's - [SETTINGS/BLUETOOTH...-> "Settings Storage". By exploring this data using Titanium Backup, I saw one variable that I believe is the cause of the issue. "Android_ID".
Sorry, I can't post the link but this is from "adrynalyne" on Android Forums - "Warning. Do Not Share Nandroid Backups".
I believe that the Star Wars: The Old Republic Security Key app is looking at the Android_ID key for a match, and then bombing out. This is only a theory from my experience. But I would suggest to anyone that's willing to try it to attempt to restore both the SWORSK and Settings Storage "SETTINGS/BLUETOOTH", rebooting, and see what happens. Of course, make a NANDROID backup before trying this!
Click to expand...
Click to collapse
I rooted my xperia x10 mini around a year ago, and all was fine. I recently unlocked the bootloader, and decided to try flashing a new rom and kernal as Sony refuse to do any further updates. I backed everything up on titanium back up, videos, contacts, apps etc. And also followed the instructions to do full back up when I flashed the new rom. I followed everything to the letter, but when the new rom was installed, I could find no contacts, music, apps or anything? I thought the best option was to use cwm and restore back? That looked as if it had gone ok, but there was a message at the end to say something? img? could not be found, and it didn't revert back, just hung at nAa screen, and would do nothing else.
After reading a few threads, I thought I'd go back to SE stock firmware - better than a dead phone! But although the sd card is showing all my back ups, including titanium back up, nothing is showing in the phone apps, or folders, all my contacts are missing, pictures, notes, everything :crying:
How do I get everything back to where it shoud be?? It may be a stupid question, but I hope you can offer some advice please.
The phone is rooted again. Thanks in advance from a newbie flasher
Did you restore your backup using Titanium again then?
The other way is to do advanced restore from CWM and choose data only.
SmG67 said:
Did you restore your backup using Titanium again then?
The other way is to do advanced restore from CWM and choose data only.
Click to expand...
Click to collapse
I wasn't sure how to restore from Titanium, but I've now downloaded Titanium backup app, and it has restored some of the things I lost, not everything :crying:
It hasn't restored any of my text messages and I have quite a lot of pictures missing. Is there anyway to get messages or pictures back?
Thanks :fingers-crossed:
alittleblonde said:
I wasn't sure how to restore from Titanium, but I've now downloaded Titanium backup app, and it has restored some of the things I lost, not everything :crying:
It hasn't restored any of my text messages and I have quite a lot of pictures missing. Is there anyway to get messages or pictures back?
Thanks :fingers-crossed:
Click to expand...
Click to collapse
Pictures are usually stored on the sd-card, so they won't get affected if you change your rom or kernel, not sure what happened with that, but the best way to get everything back would be to use CWM and choose advance restore to get your data back I suppose, it will restore everything that was on internal memory.
The reason you got stuck at the nAa-kernel logo when you restored from cwm previously is because you also restored your old rom, which doesn't run with the nAa-kernel.
the protelli
SmG67 said:
Pictures are usually stored on the sd-card, so they won't get affected if you change your rom or kernel, not sure what happened with that, but the best way to get everything back would be to use CWM and choose advance restore to get your data back I suppose, it will restore everything that was on internal memory.
The reason you got stuck at the nAa-kernel logo when you restored from cwm previously is because you also restored your old rom, which doesn't run with the nAa-kernel.
Click to expand...
Click to collapse
Thanks for your reply. I got most of the pictures back, but some seem to have vanished, and something a little weird happened, as in my photo gallery, I now have pics of little android men, a tick, camera, tools etc Guess I should just delete them??
Do you know of any way to get text messages back?
alittleblonde said:
Thanks for your reply. I got most of the pictures back, but some seem to have vanished, and something a little weird happened, as in my photo gallery, I now have pics of little android men, a tick, camera, tools etc Guess I should just delete them??
Do you know of any way to get text messages back?
Click to expand...
Click to collapse
It may be that just the thumbnails of those pictures are messed up, not the pictures itself. I would suggest copying your pictures to a folder on your computer, deleting them from sd-card and open the gallery, so it can update it's thumbnails (it will delete them all). If you then move back your pictures to your sd-card it will generate proper thumbnails again.
The txt-messages should be in your CWM-backup.
I don't know if you had CWM installed on your phone before you flashed the kernel, and what kernel you used when you made the backup. It can be a bit tricky if you tried JellyBean, but not impossible. I need a bit more information from you to be sure about how to go about that.
SmG67 said:
It may be that just the thumbnails of those pictures are messed up, not the pictures itself. I would suggest copying your pictures to a folder on your computer, deleting them from sd-card and open the gallery, so it can update it's thumbnails (it will delete them all). If you then move back your pictures to your sd-card it will generate proper thumbnails again.
The txt-messages should be in your CWM-backup.
I don't know if you had CWM installed on your phone before you flashed the kernel, and what kernel you used when you made the backup. It can be a bit tricky if you tried JellyBean, but not impossible. I need a bit more information from you to be sure about how to go about that.
Click to expand...
Click to collapse
Hi. Yes, I installed CWM before hand, and did a complete back up, I used the miniCM7 robyn rom and the nAa-2.6.29.6-nAa 14 kernal. I had considered jelly bean, but thought I'd just start with this one, before working my way up! Someone suggested ST15i 4.2.0.A.62 but it didn't sound right for the X10mini? I only bought the phone 18 months ago, so its a shame there are no further updates.
I did try to restore through the advanced setting on cwm, but it didn't work, I had the same message as before about something being missing.
I noticed another thread about a similar problem, a mismatch between numbers?? Not too sure, but it sounded similar to the problem I had.
At least I have back most of my pictures Thanks for your help.
alittleblonde said:
Hi. Yes, I installed CWM before hand, and did a complete back up, I used the miniCM7 robyn rom and the nAa-2.6.29.6-nAa 14 kernal. I had considered jelly bean, but thought I'd just start with this one, before working my way up! Someone suggested ST15i 4.2.0.A.62 but it didn't sound right for the X10mini? I only bought the phone 18 months ago, so its a shame there are no further updates.
I did try to restore through the advanced setting on cwm, but it didn't work, I had the same message as before about something being missing.
I noticed another thread about a similar problem, a mismatch between numbers?? Not too sure, but it sounded similar to the problem I had.
At least I have back most of my pictures Thanks for your help.
Click to expand...
Click to collapse
hmm, it sounds almost like your sd-card is experiencing some problems, maybe you could copy the whole thing to your computer and reformat it. but i don't think the backup will be valid anymore.
The number mismatch is the md5-checksum, The backup calculates a number when the backup is created, which is stored alongside your backup.
The restore function then uses the same method to create a checksum from the backup-file and compare it to the number created when the backup was made. If they don't match, the most likely option is a corrupt backup file, which is a pain.
And no, the st15 is the 2011 xperia mini i think, you better stick with E10-kernels and robyn-ROMS for the x10mini (if it doesn't have a hardware keyboard)
Hello community,
today I found myself in the situation where I was to make "the step" and try to install a cyanogenmod on my old, trusty Galaxy S2 GT-i9100 (yep, the oooold one). This phone has served me well, exceptionally well, in the past 4 years. Probably I'll get a new one for christmas, but that's not the point... even if unluckily a model I was considering (asus ze551kl) isn't sold in my country. eh, that's life... no easily replaceable batteries. but let's move on. I'll try to be as clear as possible because even if I'm somewhat ok with technology, I can't remember all terms.
I don't want to be polemic, but I want to clearly understand where I did wrong making a backup of my phone:
- first step, I rooted it. all went well, got ClockworkMod recovery "recovery os"; to me looks like a recovery operative system in all, a tiny version of android that could read the OS partition and clone it somewhere else.
- second step, I made several back-ups from the clockworkmod (Power+VolumeUp+Home) and moved them to the REAL microSD card, the tiny piece I can pull off.
- third... well, saving the cyanogenmod "cooked" .zip in /sdcard folder of the phone. I tried to reset everything, then installing the cyanogen from the CWM... surprise, it failed!
"well nothing bad, i have this nandroid backup manager that goes along pretty well with CWM, seems to see all the backups CWM does, so probably CWM is just cloning all my phone to a file that can be restored is anything goes wrong, and at the next restart I'll have everything back as nothing happened". Because on computers, I've experience that works like that. I cloned the HDD of my laptop (a ssd drive) over another HDD I had (a traditional spinning drive) and... whoah, it worked. I had the exact system on another box that I can place into the laptop and I know it will works, while i can safely do experiments on the other one. that's the purpose of backup, right?
then... I tried to restore my backup with CWM. has restored the wallpaper and the messages. nothing else. how is that possible?
not a single app installed, not one desktop configuration... i used to have 4 screens or "desktops" on my phone, with my widgets and my notes. all gone!
so... what I've missed?
how can I clone my android phone somewhere so I can restore it?
what is preventing me from doing that?
thanks in advance for the answers... has been a long night (it's 3:20 here and most of my time has been passed trying to figure out a solutionto this...) I'll check tomorrow
awambawamb said:
Hello community,
today I found myself in the situation where I was to make "the step" and try to install a cyanogenmod on my old, trusty Galaxy S2 GT-i9100 (yep, the oooold one). This phone has served me well, exceptionally well, in the past 4 years. Probably I'll get a new one for christmas, but that's not the point... even if unluckily a model I was considering (asus ze551kl) isn't sold in my country. eh, that's life... no easily replaceable batteries. but let's move on. I'll try to be as clear as possible because even if I'm somewhat ok with technology, I can't remember all terms.
I don't want to be polemic, but I want to clearly understand where I did wrong making a backup of my phone:
- first step, I rooted it. all went well, got ClockworkMod recovery "recovery os"; to me looks like a recovery operative system in all, a tiny version of android that could read the OS partition and clone it somewhere else.
- second step, I made several back-ups from the clockworkmod (Power+VolumeUp+Home) and moved them to the REAL microSD card, the tiny piece I can pull off.
- third... well, saving the cyanogenmod "cooked" .zip in /sdcard folder of the phone. I tried to reset everything, then installing the cyanogen from the CWM... surprise, it failed!
"well nothing bad, i have this nandroid backup manager that goes along pretty well with CWM, seems to see all the backups CWM does, so probably CWM is just cloning all my phone to a file that can be restored is anything goes wrong, and at the next restart I'll have everything back as nothing happened". Because on computers, I've experience that works like that. I cloned the HDD of my laptop (a ssd drive) over another HDD I had (a traditional spinning drive) and... whoah, it worked. I had the exact system on another box that I can place into the laptop and I know it will works, while i can safely do experiments on the other one. that's the purpose of backup, right?
then... I tried to restore my backup with CWM. has restored the wallpaper and the messages. nothing else. how is that possible?
not a single app installed, not one desktop configuration... i used to have 4 screens or "desktops" on my phone, with my widgets and my notes. all gone!
so... what I've missed?
how can I clone my android phone somewhere so I can restore it?
what is preventing me from doing that?
thanks in advance for the answers... has been a long night (it's 3:20 here and most of my time has been passed trying to figure out a solutionto this...) I'll check tomorrow
Click to expand...
Click to collapse
Probably a wrong recovery
To install cm13 you need a KitKat compatible recovery and to install gapps with cm13 you need to repit your device using one of the methods available, please follow one of these guides:
For (PC guide):http://forum.xda-developers.com/gal...vatives/mod-increase-partition-size-t3011162/
(Non PC guide):http://forum.xda-developers.com/android/software-hacking/tool-lanchon-repit-data-sparing-t3358036/
Hi,
I run the pixel 6 and I wondered if I can restore my hardware as an image? I mean, when I used the back up / restore from Google drive , I got my contacts, apps but I still need to re download my apps, choose themes, setup about security, fingerprints, schema, Google pay etc.... Is it possible to skip all those things and upload a complete back up as an image, like I do with openwrt and firmware on router?
Thank you
Short answer: No. Longer answer: You can backup apps and their settings with the likes of Swift Backup, but that requires root and the remaining stuff still needs to be set up again.
Last time I restored my phone through Google I selected to restore all apps/contacts/settings and it basically restored the phone close to 100%. What was left for me to do was minimal.
android_dan said:
Last time I restored my phone through Google I selected to restore all apps/contacts/settings and it basically restored the phone close to 100%. What was left for me to do was minimal.
Click to expand...
Click to collapse
What I understood finally is we can if we are on Android stable release
if we ever get TWRP as a custom recovery, this will be easy.
nutzfreelance said:
if we ever get TWRP as a custom recovery, this will be easy.
Click to expand...
Click to collapse
Only if you're rooted for app data but TiB will not restore system settings. Have you ever used it?
AppDash
bobby janow said:
Only if you're rooted for app data but TiB will not restore system settings. Have you ever used it?
Click to expand...
Click to collapse
you dont need to be rooted for twrp to work its a custom recovery
nutzfreelance said:
you dont need to be rooted for twrp to work its a custom recovery
Click to expand...
Click to collapse
I was thinking of something else. My mistake.
edit: @james8076 Even on a full wipe / factory reset most of the settings are restored including downloaded apps from the PS, text and phone logs. What isn't restored is app data like games along with some passwords that are not saved in Google.
@vandyman I used Appdash once but unless you are rooted it will not restore app data if I recall correctly.
The whole restore process isn't as difficult as it used to be even unrooted and bl locked. I can usually do the whole thing after PS downloads the apps in about a half hour or less. But... it's still a pain no doubt about that.