TWRP 3.x
for
Samsung Galaxy S III mini
aka. Samsung Golden
About F2FS: F2FS is supported on latest TWRP by default.
Download
http://andi34.github.io/recoveries_golden.html
Sources
Device & Kernel Source: https://github.com/andi34
Recovery Source: https://github.com/omnirom/android_bootable_recovery
XDA:DevDB Information
[golden] TWRP, Tool/Utility for the Samsung Galaxy S III Mini
Contributors
Android-Andi, golden-guy
Version Information
Status: Stable
Current Stable Version: 2.8.6.2
Stable Release Date: 2015-06-06
Created 2014-05-11
Last Updated 2016-08-14
Reserved
DOWNLOADS
http://andi34.github.io/recoveries_golden.html
~ older Files attached ~
How to flash using Odin?
If you have kies installed - uninstall first!
Download and extract "GT-I8190_TWRP_2.7.0.0.tar.md5.zip" once - you will now get the Odin-Flashable "GT-I8190_TWRP_2.7.0.0.tar.md5".
(If you got a "recovery.img" then you extracted twice! Odin can not flash *.img - but feel free to use Heimdall!)
Download attached Odin3.zip and extract it.
Run Odin.exe as administrator.
Add the twrp.tar.md5 as "PDA".
Re-partition and auto reboot NOT checked (i disabled all unneeded Options to be on the safe side )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now boot your device into downloadmode. Press volume down, Homebutton and Power-Button at the Same time
Your Device now boots into Download-Mode
Press Volume Up to confirm
Connect your Device to your PC and wait for Odin to detect it - maybe it takes some minutes until all drivers installed.
(SCREENSHOT LATER)
Everything right? You´ll be good to go if you followed all steps before!
Now press start in Odin.
Wait for Odin to finish flashing - wait one minute more after that to be sure.
(SCREENSHOT LATER)
Now disconnect and directly boot into recovery using the hardware key combination - Press volume up, Homebutton and Power-Button at the Same time. Release the Power-Button after the S3 Mini Logo - keep pressing volume up and the homebutton!
Happy TWRP
Time to get free from the Nova oppression :highfive:
Nice to see more and more people working on our phone!!
Thanks for your work
Sent from my GT-I8190 using XDA Premium 4 mobile app
joelalmeidaptg said:
Time to get free from the Nova oppression :highfive:
Click to expand...
Click to collapse
:good:
Hi Andi,
First of all, thanks for your work. Any difference between Nova's & yours twrp!?
mauam said:
Hi Andi,
First of all, thanks for your work. Any difference between Nova's & yours twrp!?
Click to expand...
Click to collapse
hi mauam mf,
no differences as i see (flashed it and it works as it should)
m.
@mauam mine is based on latest TWRP Source, there have been some changes in the meantime - also compiled myself
Very good, but you could compile a AOSP or MIUI for us? supporting all variants of the S3 Mini 8190/L/N
Good Work Thank you Android-Andy!!!
JynAlek said:
Very good, but you could compile a AOSP or MIUI for us? supporting all variants of the S3 Mini 8190/L/N
Click to expand...
Click to collapse
We are all waiting for you (no ETAS)
Well excellent work, I will keep with your twrp instead. Yours has a option to adjust the brightness, nf twrp not:laugh: Keep up bud:good:
I rooted with CF-auto root and now im in "Android system recovery <3e>" and not ODIN as before.
I tested "apply update from exteral storage" with twrp2.7_golden-20140508.zip, not working. I got "E:signature verification failed"
How do I get TWRP in?
@belgar
Download "I8190_TWRP_2.7.0.0.tar.md5.zip" and extract it once - you´ll now have a "I8190_TWRP_2.7.0.0.tar.md5".
Run Odin as Administrator.
Place the "I8190_TWRP_2.7.0.0.tar.md5" in as PDA.
Make sure Re-Partition and Auto-Reboot NOT CHECKED!
Boot your Phone into Download-Mode.
Connect it with your PC, wait until Odin added the device.
Now in Odin press "Start". Wait untill Odin finished flasheing - better wait one minute more.
If flashing didn´t failed (watch the text in Odin) reboot DIREKTLY into recovery using your Hardware-Keys.
That´s it
Edit:
BTW: Do we have CF-Autoroot for golden? Don´t use from other devices!
Sry! It wasnt CF-autoboot, i flashed another device the same day.
It was http://forum.xda-developers.com/showthread.php?t=2108900.
Pressed the wrong combination when I started the device. Pressed vol UP instead of vol DOWN.
---------- Post added at 10:23 PM ---------- Previous post was at 10:19 PM ----------
I cant uncheck "Auto Reboot", its all greyed out.
belgar said:
Sry! It wasnt CF-autoboot, i flashed another device the same day.
It was http://forum.xda-developers.com/showthread.php?t=2108900.
Pressed the wrong combination when I started the device. Pressed vol UP instead of vol DOWN.
---------- Post added at 10:23 PM ---------- Previous post was at 10:19 PM ----------
I cant uncheck "Auto Reboot", its all greyed out.
Click to expand...
Click to collapse
Check the Odin3.ini, you can use e.g. Notepad++ to edit it.
Here´s an example:
Code:
[Option]
Title= Odin 3
FactoryResetTime=120
OptionEnable=0
SLP=0
AuthorityKey=pw
[APOption]
RePartition=0
[COLOR="Red"]AutoReboot=1[/COLOR]
FResetTime=0
FlashLock=0
TFlash=0
NandErase=0
[CPOption]
PhoneEFSClear=0
PhoneBootUpdate=0k
[UIOption]
LED=0
[ButtonOption]
Bootloader=0
PDA=1
Phone=0
CSC=0
UMS/PATCH=0
[D300Jig]
;[0] not use / COM [1~2] usable
D300COM=0
;[0] not use / [1] use
MicroCable=0
[PortArrange]
;SAMSUNG Mobile Modem port (for Download mode)
DPort0=
DPort1=
DPort2=
DPort3=
DPort4=
DPort5=
DPort6=
DPort7=
;SAMSUNG Android USB Modem port (for Samsung Kies)
SPort0=
SPort1=
SPort2=
SPort3=
SPort4=
SPort5=
SPort6=
SPort7=
Make sure AutoReboot=0
I Re-Uploaded TWRP, USB-Connection now working in recovery - you are now able to use adb in recovery
Android-Andi said:
I Re-Uploaded TWRP, USB-Connection now working in recovery - you are now able to use adb in recovery
Click to expand...
Click to collapse
Awesome news cant wait to test you are doing great work :thumbup:
Sent from my GT-I8190 using XDA Premium 4 mobile app
Another great work from you Android-Andi and yes i'm excited with all this "cherry picks" you made for our phone.
Thanks... :good:
Related
Support is discontinued. Between the 6 different variants that I made this recovery for, it has been downloaded less than 500 times total over a 2 month period. That tells me that this device is simply not popular enough for continued support.
Here is TWRP 2.8.3.0 (unofficial) for the Galaxy Tab 4, 8in (T330 & T331 & T335 & T337T & T360 & T365).
This has been briefly tested by @Rusell, but please be aware that there may be a few bugs still. I do not own this device, so please be very specific when reporting any bugs you may find.
This is not a "direct from source build" (I will eventually switch to that method), but instead, it is a port from my Tab 31x version using stock Tab 4 zImage and DT image.
NOTES:
The new MTP feature of TWRP may cause issues with ADB access while in recovery. You may need to toggle "Disable MTP" a from the "mounts" menu to get ADB access.
64gb sdcards are reported to not work in this TWRP
All versions of TWRP occasionally give the "can't mount /system" error. If you get this error, simply reboot recovery and try again.
Click HERE for the latest version.
Please report any bugs here in this thread and attach the recovery.log. Advanced --> Copy log to SDcard --> Then attach the log to your post.
Credits go to:
@Rusell for initial testing
and of course the Team Win group
Supplied in 3 formats:
Odin flashable tar.md5 (for first time installation)
Recovery flashable zip (requires a custom recovery to currently be installed)
.img file (for those who use Flashify or other direct methods).
Instructions for ODIN: (use the one with "tar" in the name)
Download ODIN on your computer.
Power off the device.
Restart in "Download Mode" by holding the "HOME" button, "Volume Down" and "Power" all at the same time (for about 5 seconds).
Hit the "Volume Up" to enter download mode.
Start the ODIN exe program. Un-check Auto Reboot. See notes about ODIN below.
Connect the device via USB to your computer. Verify the device shows as "Added" in the Message box. If it doesn't show then you need the Samsung USB drivers (just install KIES to get them).
Select "PDA" then choose the recovery file you want to flash.
Hit "START". Wait for Odin to finish (~10-15 seconds). The message area will display "RES OK" when finished.
Restart directly to recovery mode before rebooting into OS.(Hold POWER, Volume UP, and the HOME button all at the same time. When you see the Samsung Logo, let go of the POWER button, but keep holding the Volume UP and HOME until you see the recovery screen).
After you get the custom recovery working, you can flash the latest SuperSu zip to get root.
Notes about ODIN
--Make sure that "Re-Partition" is NOT checked.
--Auto Reboot can be un-checked if TWRP doesn't flash correctly on your device. Some have reported that un-checking Auto Reboot fixes this issue. If you un-check Auto Reboot, you will need to reboot the device yourself (refer back to step 9).
Flash at own risk!!!!
I take no responsibility for anything you do to your device. Flashing any custom recovery will trip KNOX.
+++++++++++++++++++++++++++++++
DOWNLOADS
Click HERE for the latest version.
-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[RECOVERY] TWRP 2.8.3.0 for Galaxy Tab 4 8 inch, Tool/Utility for the Samsung Galaxy Tab 4
Contributors
gr8nole, moonbutt74
Version Information
Status: Beta
Created 2014-12-22
Last Updated 2015-02-23
CHANGELOG
2.8.3.0
All versions - fixed color
See TWRP site for other changes
2.8.2.0
T330
v2 - Disabled screen timeout to prevent freeze ups. You may (or may not) still see the setting, but the screen will not timeout.
v1 - Initial release
======================
T331
test1 - Initial test -working
======================
T335
test1 - Initial test -working
======================
T365
test2 - WORKING
test1 - not working
-
Reserved
Other 8 inch Tab 4 variants.
If you want this for your tablet, you must post your stock recovery.img and test for me. It should be easy to make for T331, T335, etc... as long as your bootloader isn't locked.
-
:/
BUG:
When making a backup (Around 42%) The tablet just crashes for a second and shuts down.
Forgot to mention that my screen timeout is disabled....
Rusell said:
BUG:
When making a backup (Around 42%) The tablet just crashes for a second and shuts down.
Forgot to mention that my screen timeout is disabled....
Click to expand...
Click to collapse
I need recovery log.
Sent from my SM-N900V using Tapatalk
Thanks long time ago i seen you haha
gr8nole said:
I need recovery log.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Re-installed recovery now it is working well. However this time i am backing up on my external SD, maybe i didn't have enough space in my internal storage.
---------- Post added at 09:35 AM ---------- Previous post was at 09:31 AM ----------
BUG (Again )
When the screen times out, you can't wake up the device it just deep sleep. I'm going to try to pull out a recovery log.
Rusell said:
Re-installed recovery now it is working well. However this time i am backing up on my external SD, maybe i didn't have enough space in my internal storage.
---------- Post added at 09:35 AM ---------- Previous post was at 09:31 AM ----------
BUG (Again )
When the screen times out, you can't wake up the device it just deep sleep. I'm going to try to pull out a recovery log.
Click to expand...
Click to collapse
New v2 uploaded. http://d-h.st/bpb
I added a flag to disable the screen timeout. Let me know if it works.
gr8nole said:
New v2 uploaded. http://d-h.st/bpb
I added a flag to disable the screen timeout. Let me know if it works.
Click to expand...
Click to collapse
screen timeout is not disabled.but that's the only bug i found.
Who else owns this device other than me?
NVM in the settings it says it is set for 60 seconds but it never times out.
i beg you
can anyone please port a recovery to smt331
anyone i mean that should be custom like my favourite cwm
gr8nole said:
New v2 uploaded. http://d-h.st/bpb
I added a flag to disable the screen timeout. Let me know if it works.
Click to expand...
Click to collapse
gr8nole,
hi, in boardconfig
TW_NO_SCREEN_BLANK := <true or comment line with # or omit for false>
TW_NO_SCREEN_TIMEOUT := <true or comment line with # or omit for false>
to completely slay screen time-out and lock
m
moonbutt74 said:
gr8nole,
hi, in boardconfig
TW_NO_SCREEN_BLANK := <true or comment line with # or omit for false>
TW_NO_SCREEN_TIMEOUT := <true or comment line with # or omit for false>
to completely slay screen time-out and lock
m
Click to expand...
Click to collapse
That's what I used and it did work.
Dewang rocky said:
can anyone please port a recovery to smt331
anyone i mean that should be custom like my favourite cwm
Click to expand...
Click to collapse
If you will send me the T331 boot.img or recovery.img, I will do it. But, you have to test it for me.
Rusell said:
NVM in the settings it says it is set for 60 seconds but it never times out.
Click to expand...
Click to collapse
Ok, the reason you still see the screen timeout settings is because that info was saved in the TWRP settings file. This would only affect you because no-one else has flashed a version that had screen timeout. If you delete the TWRP/.twrps file from your internal storage, then you won't see the timeout settings anymore. That page will only show brightness control. Either way, the timeout is disabled and should cause no more problems. :good:
Thanks for testing!
Flashing TWRP recovery successful on sm-T330nu
I have successfully flashed TWRP recovery on my Tablet, sm-T330nu
using the easy instructions provided by the OP, gr8nole.
I tested this recovery by flashing the supersu 2.40 and did a backup of
the stock rom. This recovery is great and working fine.
I have not face any screen freeze up during this test.
When wiping cache/dalvik, it takes a bit long about 4 mins to finished.
Thank you gr8nole for your hard work and great TWRP.
The stock rom backup using this TWRP recovery
is 2.89gb large. This stock rom had many not needed
apps removed and only a few small games.
Is this backup size normal for a stock rom of
a samsung tablet T330nu ?
Antrobot200 said:
The stock rom backup using this TWRP recovery
is 2.89gb large. This stock rom had many not needed
apps removed and only a few small games.
Is this backup size normal for a stock rom of
a samsung tablet T330nu ?
Click to expand...
Click to collapse
That doesn't seem to be too big. Samsung roms are typically very big. Look into the backup folder and see what the size of the pieces of the backup are. It may be a lot of data.
Edit: On my Tab 3, my backup is about 3 gb with a mildly debloated Samsung rom.
Sent from my SM-T310 using Tapatalk
Thank you for your quick explaination about
the backup rom size. I am glad it is the normal
size for this tablet. This is my first samsung tablet
so I am still learning a lot about using it.
For some reason this won't install for me in odin. I go through the process and when I boot into recovery it takes me into stock recovery. I renamed the file T330.TWRP.2.8.2.0.v2.tar.md5.exe with .tar extension and it flashes but but when I go into recovery its stock recovery.
thanks
I will upload recovery.img and boot.img of my smt331
'm proud to present the first dual boot project for the Moto X ghost
This is currently fo testing and if it start working i will make this thread more cleaner and organized
About this Utility:
This mod can dual boot any no. of roms whether stocks or anything and is not so complex like Multirom with kexec patch.
How to test it :
ur device shoud be rooted to use
1. Download the latest snapshot release of Dual Boot Patcher from here and install it on your Moto x.
2. Install the apk
3. Open the apk go to ROMS and you will see your primary ROM, press the menu key and click “set kernel”.
Now you need to patch your CyanogenMod ROM and Gapps files to make them compatible with dual-booting.
In the Dual Boot Patcher app select “patch zip file” and choose “Ghost (Moto x)” from the drop down menu, now find the ROM in ur file explorer and press tap to begin patchingnow go to roms again and select pink button then add button then find ur patched file
it will be of name "romname_patched.zip"
after its loaded press tick icon
after that u will see 2 roms primary and secondary in roms section
where primary rom is wrotten press those 3 dots in right side of it and press set kernel
then the last step just press seconday rom
after then just reboot and u will in ur 2nd rom
test it and tell me if its working
Press thanks if i helped
Credits
especially @Chexialong for this utlity
more coming soon
I see it is in testing mod, i am gonna go home and give it a try
Thanks ....it can be stable as well as alpha
So plz teta and tell me
Anyone else interested in trying this
Well believe me this is better then multirom
Any particular requirements, other than root? For example, does the first ROM need to be stock, and secondary ROM must be CM/AOSP? Or can I have CM 12.1 first, stock second?
I'm currently running CM 12.1, but I can go back to my stock nandroid if I have to.
bobdamnit said:
Any particular requirements, other than root? For example, does the first ROM need to be stock, and secondary ROM must be CM/AOSP? Or can I have CM 12.1 first, stock second?
I'm currently running CM 12.1, but I can go back to my stock nandroid if I have to.
Click to expand...
Click to collapse
No need
Ur wish whether u want to keep first ROM cm or stock
Plz test it
So if there r problems I can get it fixed
If I would have the device I could have tested it myself first before posting
Thanks
@n8nn new dual boot for moto x
Cool. Downloading a new ROM to install as secondary now!
---------- Post added at 07:20 PM ---------- Previous post was at 06:59 PM ----------
Here it is installing Krypton 4.4.4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here it is finished installing:
Here it is as secondary:
Just a sec and I'll boot it and update this post with results.
Edit: no luck. I'm posting this on my iPad because my phone now only boots to recovery. Exactly what happened is as follows...
Select secondary ROM, reboot using normal hold power button, select reboot. Phone rebooted and displayed unlocked boot loader warning, screen went blank, unlocked bootloader warning came back, it went automatically into TWRP recovery.
Tried wiping Dalvik, caches, and rebooting. Same problem. Only boots to recovery. Now restoring my CM 12.1 nandroid.
i am using stock 5.1 as primary but when i select patch it shows failed to open archive for writing
Just tried it again. Same result.
Edit:
Be careful with this guys. After restoring my nandroid, I realized several oddities were happening. It definitely messes with partitions, and unless you are comfortable manually flashing your FXZ or using RSDlite, do NOT attempt this.
miju12 said:
i am using stock 5.1 as primary but when i select patch it shows failed to open archive for writing
Click to expand...
Click to collapse
Stock 5.1? This is for 2013 Moto X....
jonwgee said:
Stock 5.1? This is for 2013 Moto X....
Click to expand...
Click to collapse
yeah i know and i am using moto x 2013 build 222.21.7
Could it be because you're on 5.X, and you're trying to boot a 4.4.x? Have you tried the other way around, or both on the same version?
@Brawn_Sg
Got stuck in a bootloop had to use my back up I didn't patch play store for my secondary rom 5.0.2 that might be reason!!??
mac1996 said:
Got stuck in a bootloop had to use my back up I didn't patch play store for my secondary rom 5.0.2 that might be reason!!??
Click to expand...
Click to collapse
Looks like you're on Lollipop (or were) when you set kitkat as your primary, while running a separate ROM. That doesn't sound wise.
Or am I just looking at it wrong and you managed st swap OS's prior to having this issue?
someone managed to make the procedure successfully?
Snaipersky said:
Looks like you're on Lollipop (or were) when you set kitkat as your primary, while running a separate ROM. That doesn't sound wise.
Or am I just looking at it wrong and you managed st swap OS's prior to having this issue?
Click to expand...
Click to collapse
I have been using krypton ROM for almost a month .. I had the old cm12 5.0.2 in download folder , so I wanted to give it a try ..
It successfully patched both Roms with no issues after I selected secondary ROM and rebooted it got stuck on bootlogo
I did my 1 rom is epsilonproject-v3.1 set kernel
and than my 2º rom I modified Krypton-rom-Motox-v1.4.1-Unlocked
but when i select my 2 rom and restart, just enter in TWRP,
sorry my english
---------- Post added at 09:17 PM ---------- Previous post was at 08:38 PM ----------
what I need to choose in this option?
DangeloGH said:
I did my 1 rom is epsilonproject-v3.1 set kernel
and than my 2º rom I modified Krypton-rom-Motox-v1.4.1-Unlocked
but when i select my 2 rom and restart, just enter in TWRP,
sorry my english
---------- Post added at 09:17 PM ---------- Previous post was at 08:38 PM ----------
what I need to choose in this option?
Click to expand...
Click to collapse
Flash Krypton back on your phone and see if you are able to download anything at all. Or even update an app.
If not, be prepared to use RSDlite and use that to go back to stock.
bobdamnit said:
Flash Krypton back on your phone and see if you are able to download anything at all. Or even update an app.
If not, be prepared to use RSDlite and use that to go back to stock.
Click to expand...
Click to collapse
I just flash kernel and boot normaly...
but the dual boot doesnt work...
Port of CF-autoroot for the Tab A and Tab A plus.
Supports all models.
See the link below for details:
http://forum.xda-developers.com/showthread.php?t=3124284
NOTE: does not support Marshmallow.
To root MM install TWRP provided below and use Supersu.
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Flash with Odin3 v3.10.6.
Please post any feedback.
NOTE: PLEASE DISREGARD ANY OF MY POSTS WITH REFERENCES TO http://galaxy-tab-a.proboards.com/ I NO LONGER WISH TO REMAIN A MEMBER OF THAT FORUM AND HAVE REMOVED ALL OF MY DEVELOPMENT POSTS THERE. THE NEW FORUM LINK IS http://galaxy-tab-a.boards.net
SM-T550/T555/SM-P550/P555:
https://www.androidfilehost.com/?fid=23991606952613365
Stock recovery:
http://www.mediafire.com/?kxl0r5bsk75322y
SM-T350/T355/SM-P350/P355
https://www.androidfilehost.com/?fid=24052804347758647
Stock recovery:
https://www.androidfilehost.com/?fid=24052804347758669
Flash with ODIN 3.10.7 in the AP slot.
Uncheck Auto reboot.
Load the respective file above into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
Guides:
http://techchomps.com/how-to-root-the-samsung-galaxy-tab-a-9-7/
http://forum.xda-developers.com/showthread.php?p=61757996
Credits to Chainfire.
Please give feed back.
TWRP can be found here:
http://forum.xda-developers.com/android/development/recovery-t3426560
DONATE ME HERE IF YOU'D LIKE TO SUPPORT ME OR BUY ME A BEER>>>DONATE
Thanks
How's about SM-P355?
kaipro said:
How's about SM-P355?
Click to expand...
Click to collapse
Well the P version of the Tab A has SPen while the T version doesn't. I'm guessing since the hardware is similar, try the T350 at your risk.
DUHAsianSKILLZ said:
Well the P version of the Tab A has SPen while the T version doesn't. I'm guessing since the hardware is similar, try the T350 at your risk.
Click to expand...
Click to collapse
It is quite likely the same story as the tab s. T800 kernel boots on all t80x models.
As they all use the same ramdisk it should boot.
Is there a twrp image for this? I have someone on Google plus looking for one
Quote100 said:
Is there a twrp image for this? I have someone on Google plus looking for one
Click to expand...
Click to collapse
See the first link in the op.
This is for the 5.0.2 OD1 right?
Sent from my SCH-I545 using Tapatalk
ravenmk said:
This is for the 5.0.2 OD1 right?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
It doesn't matter which firmware you're running. If your model matches it will work.
ashyx said:
It doesn't matter which firmware you're running. If your model matches it will work.
Click to expand...
Click to collapse
Oh, ok. Thank you
Sent from my SCH-I545 using Tapatalk
---------- Post added at 04:57 PM ---------- Previous post was at 04:52 PM ----------
And one last question, after flashing the CF Auto Root we flash back the stock recovery?
Sent from my SCH-I545 using Tapatalk
ravenmk said:
Oh, ok. Thank you
Sent from my SCH-I545 using Tapatalk
---------- Post added at 04:57 PM ---------- Previous post was at 04:52 PM ----------
And one last question, after flashing the CF Auto Root we flash back the stock recovery?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Stock recovery is automatically flashed.
Howto
I didn't find any clear instructions on how to do this except for this french site. I tested with my SM-T550 and it worked like a charm.
Download all files as described in OP, and Odin
1. Turn off your tablet
2. Simultaneously press the keys: Volume Down + Home + Power . Then press volume up to select download mode.
3. On your computer, open Odin in administrator mode. Odin3-v3.10.6.exe in the zip file.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Connect your tablet to your computer using the USB cable. In ODIN , the box under ID: COM will be in blue when it has detected your tablet.
5. Click AP then select the file sm-t550_cf -autoroot.tar you downloaded.
6. Check the boxes that only "Auto Reboot" and "F. Reset Time" are checked (look in the "Options" tab). Make sure the box Re-Partition is not checked.
7. Start the root procedure by clicking the Start button and wait a few moments. The tablet will reboot, red android appear and some status message from the auto-root script and then restart in 10 seconds.
8. At the end of the installation, you can disconnect your tablet from your computer.
9. That's it, you are rooted
Where to get Odin3 v3.10.6?
See here: http://forum.xda-developers.com/showpost.php?p=61757996&postcount=11
Sorry for not reading the threads in this forum.
smileysjm said:
Where to get Odin3 v3.10.6?
See here: http://forum.xda-developers.com/showpost.php?p=61757996&postcount=11
Sorry for not reading the threads in this forum.
Click to expand...
Click to collapse
Here you go https://www.androidfilehost.com/?fid=95916177934550076
Sent from my SM-T800 using Tapatalk
@sinnadyr Your screen capture after step 6 is different from the .tar file I have downloaded. I have SM-t550_cf-autoroot.tar
Are these the same steps I should be using for my Samsung Galaxy Tab A (SM-P555)? I am a little confused.
I picked up a Galaxy Tab A 9.7 Wifi a few days ago i am going to be working on trying to get an aosp tree working on it.
Are there any other threads for the tab a other then the one linked in op?
Basic Tree:
https://github.com/deadman96385/android_device_samsung_gt510wifi
Kernel:
https://github.com/deadman96385/android_kernel_samsung_gt510wifi
There isnt a dedicated forum yet. Somebody needs to request for one to admin.
You should add a tag to the op so it shows up when searching for the tab a i think its
Samsung Galaxy Tab A Series
deadman96385 said:
You should add a tag to the op so it shows up when searching for the tab a i think its
Samsung Galaxy Tab A Series
Click to expand...
Click to collapse
Well from the breadcrumb below, it is rather hard to find this thread.
xda-developers > Android Development and Hacking > Miscellaneous Android Development > [ROOT]Samsung Galaxy Tab A SM-T550/P550/P555/T350/P350/P355
Should these threads be combined into a top level forum such as:
http://forum.xda-developers.com/Samsung-Galaxy-Tab-A-Series
Anyway, this is my two cents on the matter. What do you think?
smileysjm said:
Well from the breadcrumb below, it is rather hard to find this thread.
xda-developers > Android Development and Hacking > Miscellaneous Android Development > [ROOT]Samsung Galaxy Tab A SM-T550/P550/P555/T350/P350/P355
Should these threads be combined into a top level forum such as:
http://forum.xda-developers.com/Samsung-Galaxy-Tab-A-Series
Anyway, this is my two cents on the matter. What do you think?
Click to expand...
Click to collapse
It would be nice but there is a long list of devices waiting for their own forums
I've asked admin a couple of times for this post to be added to the root directory thread, but to no avail.
Team Win Recovery Project 3.2.3-0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Exynos ONLY.
In NO way it is compatible with Snapdragon variants including but not limited to American(U/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. All apps that use KNOX like Samsung pay, Secure Folder and maybe more will no more work
Download: Crownlte (Exynos variants - N960F/FD/X/N)
DOWNLOAD TWRP FOR CROWNLTE
Sources:
TWRP Tree
Kernel Source
Changelog:
Check #2.
Guide:
Check #3.
Bugs:
-nothing
XDA:DevDB Information
[RECOVERY]TWRP for Galaxy Note 9 (Exynos), Kernel for the Samsung Galaxy Note 9
Contributors
geiti94
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2018-08-25
Created 2018-08-25
Last Updated 2018-08-25
AUG. 25:
Initial Release
HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Shutdown your Note 9
- Hold [VOLUME DOWN] + [BIXBY] and connect usb cable (make sure usb is connected to the pc!)
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
9. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Works
I have test it on N960F and it works.
It´s very very great. Many thank.
Thanks. I'll test it now.
P.s you may wanna remove "Kernel Special Features" from under contributors in the first post and maybe (hopefully) keep it for another thread
Nasty_z said:
Thanks. I'll test it now.
P.s you may wanna remove "Kernel Special Features" from under contributors in the first post and maybe (hopefully) keep it for another thread
Click to expand...
Click to collapse
thats xda byself that adds it when i make devdb is on my note 8 twrp thread the same :silly:
geiti94 said:
thats xda byself that adds it when i make devdb is on my note 8 twrp thread the same :silly:
Click to expand...
Click to collapse
haha ok. Recovery works fine! Will try and flash zips later. Thanks a lot for this!
After flashing TWRP i can boot to TWRP but when i boot the system and reboot to TWRP, the default recovery is back.
Can you please fick it?
Did anybody have a "no verity and no encrypt" to format data and make backup of data possible and magisk install?
@geiti94
Tested and made backup, it was uneventful.
Kindly accept token of appreciation
Transaction ID:3JT7982018981160W
maverickluke said:
After flashing TWRP i can boot to TWRP but when i boot the system and reboot to TWRP, the default recovery is back.
Can you please fick it?
Did anybody have a "no verity and no encrypt" to format data and make backup of data possible and magisk install?
Click to expand...
Click to collapse
thats because you dont flashed any magisk.
use this magisk for note 9
https://mega.nz/#!6F5UhKAL!PXl1bvn5WsmqXlLKYF41UddHQ0UdG00GgfJYW_-YEFE
geiti94 said:
thats because you dont flashed any magisk.
use this magisk for note 9
https://mega.nz/#!6F5UhKAL!PXl1bvn5WsmqXlLKYF41UddHQ0UdG00GgfJYW_-YEFE
Click to expand...
Click to collapse
You are right. now i can boot into TWRP after reboot from System and have noch encrypt on /data.
Again many thanks. You made my day.
Great Job
geiti94 said:
AUG. 25:
Initial Release
Click to expand...
Click to collapse
Any chance that you will make a Snapdragon Varient for those with an unlocked bootloader?
geiti94 said:
thats because you dont flashed any magisk.
use this magisk for note 9
https://mega.nz/#!6F5UhKAL!PXl1bvn5WsmqXlLKYF41UddHQ0UdG00GgfJYW_-YEFE
Click to expand...
Click to collapse
what is magisk? and whay the download to it is not in this post? thanks
Not starts in Download
I m not able to enter Download mode on note9. It is continuously restarting.
When phones is off, i m holding Volume -, Bixby and Power. Phone vibrates once, turns on, but after 4-5 second, again vibrates and shows starting logo, and it continously repeating until i hold all three buttons. If i release power it boots in safe mode..
What i m doing wrong ?
If I press Vol +, bixby + power it successfully goes to recovery..
Is any other way to flash this package, may through adb in recovery mode ?
---------- Post added at 07:43 AM ---------- Previous post was at 07:23 AM ----------
XoredBrain said:
I m not able to enter Download mode on note9. It is continuously restarting.
When phones is off, i m holding Volume -, Bixby and Power. Phone vibrates once, turns on, but after 4-5 second, again vibrates and shows starting logo, and it continously repeating until i hold all three buttons. If i release power it boots in safe mode..
What i m doing wrong ?
If I press Vol +, bixby + power it successfully goes to recovery..
Is any other way to flash this package, may through adb in recovery mode ?
Click to expand...
Click to collapse
Got it. It has to be connected by USB to Odin 1.13, then these keys works like expected
Which Odin version do you guys use ?
störte said:
Which Odin version do you guys use ?
Click to expand...
Click to collapse
Odin_3.10.7.zip
Also tested on N960F and can confirm that it works. Back up created and reboot to system worked flawlessly. No zips to flash as yet but works fine for me.
erankalimi said:
what is magisk? and whay the download to it is not in this post? thanks
Click to expand...
Click to collapse
It's a root package like supersu, if you want to root your phone you need to flash magisk zip, it's not in the first post because this thread is about twrp and not a how to root
i am not able to do it. with phone off, pressing bixby + vol down does nothing no matter how long i press.
with bixby + vol up + power, phone enters stock recovery but odin 3.13.1 says "removed"
i have sm 960F and i rooted previously with dr Ketan method.
what is wrong?
---------- Post added at 10:50 AM ---------- Previous post was at 10:47 AM ----------
XoredBrain said:
I m not able to enter Download mode on note9. It is continuously restarting.
When phones is off, i m holding Volume -, Bixby and Power. Phone vibrates once, turns on, but after 4-5 second, again vibrates and shows starting logo, and it continously repeating until i hold all three buttons. If i release power it boots in safe mode..
What i m doing wrong ?
If I press Vol +, bixby + power it successfully goes to recovery..
Is any other way to flash this package, may through adb in recovery mode ?
---------- Post added at 07:43 AM ---------- Previous post was at 07:23 AM ----------
Got it. It has to be connected by USB to Odin 1.13, then these keys works like expected
Click to expand...
Click to collapse
odin 1.13?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official TWRP 3.3.1-* For Samsung Galaxy Note8 Snapdragon (greatqlte)
Only for Snapdragon - This is not compatible with Exynos variants
Current Support:
Chinese(0/8/6), Hong Kong(0), Japanese(SC-*)/(SCV*)
Disclaimer :
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this recovery before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Features:
-Build from lastest source code of samsung
-Use Customize FusionLeo Kernel link
-Optimize Daily Usage
-Lowest brightness by default
-Stop vibration
Downloads:
click me
Installation Step:
From stock rom
Download Odin v3.13.1 (Recommend 3B path version)
Download and install Samsung Drivers (if you have them installed you can skip this step)
Go to settings/Developer options and enable OEM unlock (If you don't see developer settings, go into Settings/About phone/Software info and tap "Build number" 10 times to show Developer options menu)
Download TWRP_*.tar
Switch off the phone
Use Bixby Key+Volume Down+Power to enter Download Mode and connect the device to usb
Open Odin and untick autoreboot in "options" tab. Also make sure that your device is detected
Put TWRP_*.tar.md5 file into AP tab
Click Start
When Odin shows "PASS", take your device in hands, disconnect the usb cable and press simultaneously the "Bixby key" + "Vol. Down" + "Power" buttons until the downoad mode disappears
At the precise moment the screen becomes black, immediately release the "Vol.Down" button and press the "Bixby key" + "Vol. UP" + "Power" buttons during 10 to 15sec to forcefully enter TWRP
If it didn`t worked, redo the steps from #1 more careful this time.
TWRP
Download TWRP_*.img, push it into phone storage, choose install image in your current recovery, navigate to downloaded *.img file, select it, select to flash as recovery.
!!!After the EVERY first time installation of TWRP, please Format /data Patition!!!
If you facing any problem or error please Dropdwon in here
OR
Join the Telegram Channal to report Problem
Administrator ：PLMH
Telegram group : Click Here to Join
Sources:
Device tree - https://github.com/TeamWin/android_device_samsung_greatqlte
Kernel - https://github.com/LeeMenHin/dreamqlte
Recovery - https://github.com/omnirom/android_bootable_recovery
Credits:
TeamWin
@jesec
@TwrpBuilder
Failed on SM-N9500 TGY Hong Kong latest stock ROM
Failed on the latest stock ROM SM-N9500 TGY Hong Kong N9500ZHS5DSI1.
TWRP installed via odin v3.13 with success but it failed to boot up. The boot screen showed "custom" and a symbolic lock on it. It kept rebooting.
Appreciate your help.
greenleaves said:
Failed on the latest stock ROM SM-N9500 TGY Hong Kong N9500ZHS5DSI1.
TWRP installed via odin v3.13 with success but it failed to boot up. The boot screen showed "custom" and a symbolic lock on it. It kept rebooting.
Appreciate your help.
Click to expand...
Click to collapse
Try to change the Bootloader to the Chinese version one, i.e., flash Stock ROM (TGY) but use Chinese N9500 BL, it should work that way.
Ksingle007 said:
Try to change the Bootloader to the Chinese version one, i.e., flash Stock ROM (TGY) but use Chinese N9500 BL, it should work that way.
Click to expand...
Click to collapse
That didn't work either.
The CHC loader N9500ZCS5DSJ3_N9500CHC5DSJ3_CHC was flashed together the rest of TGY as suggested. It kept rebooting and failed to boot up. The download screen showed "Qualcom Secureboot: ENABLE". The others were all OFF. Any idea?
Appreciate very much your help ...
Hi there my friend! Can i use this ia a n950u1 with snapdragon 835?
anab said:
Hi there my friend! Can i use this ia a n950u1 with snapdragon 835?
Click to expand...
Click to collapse
NO!
Only for SM-N9500 and the models listed in OP!
The SM-N950U1/U/W have LOCKED BOOTLOADERS!
greenleaves said:
That didn't work either.
The CHC loader N9500ZCS5DSJ3_N9500CHC5DSJ3_CHC was flashed together the rest of TGY as suggested. It kept rebooting and failed to boot up. The download screen showed "Qualcom Secureboot: ENABLE". The others were all OFF. Any idea?
Appreciate very much your help ...
Click to expand...
Click to collapse
Try to use BL from earlier versions and see how it goes...
---------- Post added at 10:19 AM ---------- Previous post was at 10:18 AM ----------
Hello, does anyone know whether Stock SJ3 can be rooted or the BL is locked?
Ksingle007 said:
Try to use BL from earlier versions and see how it goes...
---------- Post added at 10:19 AM ---------- Previous post was at 10:18 AM ----------
Hello, does anyone know whether Stock SJ3 can be rooted or the BL is locked?
Click to expand...
Click to collapse
Will definitely give it a try. BTW, the OEM unlock went missing. Any way to get it back? What particularly version of BL you would suggest?
Many thanks again ...
greenleaves said:
Will definitely give it a try. BTW, the OEM unlock went missing. Any way to get it back? What particularly version of BL you would suggest?
Many thanks again ...
Click to expand...
Click to collapse
Sorry, late repy... try BL from N9500ZCU5DSH2, or the one from post #175 on this link:
https://forum.xda-developers.com/galaxy-note-8/development/rom-ice-fox-v1-0-t3922135/page18
Don't have OEM option to unlock my device is there a way I can do OEM_unlock in ADB
greenleaves said:
That didn't work either.
The CHC loader N9500ZCS5DSJ3_N9500CHC5DSJ3_CHC was flashed together the rest of TGY as suggested. It kept rebooting and failed to boot up. The download screen showed "Qualcom Secureboot: ENABLE". The others were all OFF. Any idea?
Appreciate very much your help ...
Click to expand...
Click to collapse
I got the same problem.
boot loop after flashing twrp.
Note：
SM-N9500 TGY N9500ZHU5DSG2
BL：CHC N9500ZCU5DSG2
twrp1：twrp-3.3.1-0-greatqlte.img.tar(also had tried 3.4.0-0)