EDIT: SOLVED
Fixed it, thanks to Zuluman!
For anyone else with this issue here's how I solved it:
Installed stock i9300 UK (BTU) 4.3 ROM using ODIN
Flashed TWRP recovery with ODIN
Downloaded Patched_XXUGMK6_kernel.zip and Patched_XXUGMK6_modem.zip:
Zuluman's Files
Installed these via. the TWRP recovery
Wiped data, cache and dalvik cache, rebooted the device and then it should connect
==============================================
Hi,
I'm aware there are a TON of threads similar to this out there but I have tried so many 'solutions' and cannot get anywhere.
I am getting the 'Emegency Calls Only' error on my Galaxy S3 i9300 after trying to use custom ROMs and even the stock ROMs. My IMEI and serial number are correct and I have also tried the ARIZA patch but I still receive the same error.
I'd be very grateful if anyone could help and also if any more info. is required, I'll post it.
Thanks.
Try to find the latest recovery for the device and get the "modem.bin" file out of the Archive and flash it using Odin using the CP or the Phone button.
Sent from my GT-I9300 using Tapatalk
Fixed it, thanks to Zuluman!
For anyone else with this issue here's how I solved it:
Installed stock i9300 UK (BTU) 4.3 ROM (can be found on sammobile) using ODIN
Flashed TWRP recovery with ODIN
Downloaded Patched_XXUGMK6_kernel.zip and Patched_XXUGMK6_modem.zip:
tinyurl.com/zuluman
Installed these via. the TWRP recovery
Wiped data, cache and dalvik cache, rebooted the device and bazinga, connected.
Hopefully this helps someone out there, my head's been spinning all weekend!
lukeg26 said:
Fixed it, thanks to Zuluman!
For anyone else with this issue here's how I solved it:
Installed stock i9300 UK (BTU) 4.3 ROM (can be found on sammobile) using ODIN
Flashed TWRP recovery with ODIN
Downloaded Patched_XXUGMK6_kernel.zip and Patched_XXUGMK6_modem.zip:
tinyurl.com/zuluman
Installed these via. the TWRP recovery
Wiped data, cache and dalvik cache, rebooted the device and bazinga, connected.
Hopefully this helps someone out there, my head's been spinning all weekend!
Click to expand...
Click to collapse
its works !!!
pankaj.jajoria said:
its works !!!
Click to expand...
Click to collapse
Good to know it's helped others Exact reason why I commented how I fixed it, because there are so many threads that say either "fixed" and give no solution, or they never reply!
it works but the phone goes modified and counter goes +2 and custom rom in download mode .
---------- Post added at 12:33 AM ---------- Previous post was at 12:30 AM ----------
is there any way to flash modem through odin with out rooting or custom recovery .
yasser86 said:
it works but the phone goes modified and counter goes +2 and custom rom in download mode .
---------- Post added at 12:33 AM ---------- Previous post was at 12:30 AM ----------
is there any way to flash modem through odin with out rooting or custom recovery .
Click to expand...
Click to collapse
Purchase Triangle Away from Google Play, reset the counter then you should get the following:
Product Name: GT-I9300
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
However, I don't know about this method in a custom ROM since it'd be custom, not official stock.
i flash them through a custom recovery , so how i can get it official and zero count !!
Thanks for that!
Sent from my GT-I9300 using XDA Free mobile app
yasser86 said:
i flash them through a custom recovery , so how i can get it official and zero count !!
Click to expand...
Click to collapse
After flashing through a custom recovery, I think if you might be able to use Triangle Away to set the counter to zero, then extract the recovery.img (or .bin?) from the stock ROM and flash this through ODIN so you'll end up with stock ROM and stock recovery.
lukeg26 said:
EDIT: SOLVED
Fixed it, thanks to Zuluman!
For anyone else with this issue here's how I solved it:
Installed stock i9300 UK (BTU) 4.3 ROM using ODIN
Flashed TWRP recovery with ODIN
Downloaded Patched_XXUGMK6_kernel.zip and Patched_XXUGMK6_modem.zip:
Zuluman's Files
Installed these via. the TWRP recovery
Wiped data, cache and dalvik cache, rebooted the device and then it should connect
==============================================
Hi,
I'm aware there are a TON of threads similar to this out there but I have tried so many 'solutions' and cannot get anywhere.
I am getting the 'Emegency Calls Only' error on my Galaxy S3 i9300 after trying to use custom ROMs and even the stock ROMs. My IMEI and serial number are correct and I have also tried the ARIZA patch but I still receive the same error.
I'd be very grateful if anyone could help and also if any more info. is required, I'll post it.
Thanks.
Click to expand...
Click to collapse
Wow! Thanks heaps! I spent nearly 2 days trying to find a solution to this! This one definitely worked for me! Two thumbs up!!!
Thanks ALOT!!! This is the only solution that actually WORKS!!!!
Thanks You Very Much.... My network is back
this solution works, but still there is a problem with my i9300
sometimes no service, sometimes ok, sometimes imei null
did the same, didnt work
Fixed my original s3
Hey dude, thanks for this. now i have my s3 working wasn't as much of an issue but had to try this fix and it worked
this method didnt work on my 2 galaxy s3's. an other solution someone?
Tried the XXUGMK6. And I'm still getting same no service or emergency calls only, what are other versions meant for ? Like XXUFMJ9 XXEMG4
Thanks!!It Works
Awesome...Thanks Zuluman, it works!!!:good::good::good::good:
Best Solution!!
lukeg26 said:
EDIT: SOLVED
Fixed it, thanks to Zuluman!
For anyone else with this issue here's how I solved it:
Installed stock i9300 UK (BTU) 4.3 ROM using ODIN
Flashed TWRP recovery with ODIN
Downloaded Patched_XXUGMK6_kernel.zip and Patched_XXUGMK6_modem.zip:
Zuluman's Files
Installed these via. the TWRP recovery
Wiped data, cache and dalvik cache, rebooted the device and then it should connect
==============================================
Hi,
I'm aware there are a TON of threads similar to this out there but I have tried so many 'solutions' and cannot get anywhere.
I am getting the 'Emegency Calls Only' error on my Galaxy S3 i9300 after trying to use custom ROMs and even the stock ROMs. My IMEI and serial number are correct and I have also tried the ARIZA patch but I still receive the same error.
I'd be very grateful if anyone could help and also if any more info. is required, I'll post it.
Thanks.
Click to expand...
Click to collapse
Thank you for this awesome solution! I have tried many different solutions and none of them solve the problem.....
Just follow the instructions and this should definitely work.
Thanks to everyone who contributed to this solution!
thank you
it worked for me thank you
Related
I followed the guide in the '[READ THIS]' thread and flashed a stock rom (i already tried about 10 different roms), but i still get a boot loop.
As i can enter the recovery and download mode without a problem and there never seems to be an error message after flashing i don't think that there is something wrong with the hardware.
Does anyone have an idea what i could do?
Also i somewhere read that you can fix pretty much any problem by using a riffbox.
Does any of you guys have any experience with that thing/ know if that could probably fix my problem?
x-timewinder-x said:
I followed the guide in the '[READ THIS]' thread and flashed a stock rom (i already tried about 10 different roms), but i still get a boot loop.
As i can enter the recovery and download mode without a problem and there never seems to be an error message after flashing i don't think that there is something wrong with the hardware.
Does anyone have an idea what i could do?
Also i somewhere read that you can fix pretty much any problem by using a riffbox.
Does any of you guys have any experience with that thing/ know if that could probably fix my problem?
Click to expand...
Click to collapse
In recovery did u try the:first clear cache and then wipe data/factory reset.After these reboot
Sent from my GT-I9100 using Tapatalk
Yes, i already tried that.
In cwm recovery i also tried to format data,system and cache and flashed a new rom afterwards just in case.
x-timewinder-x said:
Yes, i already tried that.
In cwm recovery i also tried to format data,system and cache and flashed a new rom afterwards just in case.
Click to expand...
Click to collapse
All i can suggest is above formats plus format sdcard and format dalvik you will loose data but that looks lost anyway .
Flash an older stock rom via Odin from .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
JJEgan said:
All i can suggest is above formats plus format sdcard and format dalvik you will loose data but that looks lost anyway .
Flash an older stock rom via Odin from .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Tried all of that, but i'm still stuck at boot loop
Does that mean the hardware is just broken?
x-timewinder-x said:
Tried all of that, but i'm still stuck at boot loop
Does that mean the hardware is just broken?
Click to expand...
Click to collapse
Not necessarily.
Similar thing happened to me with KI8.
Was all good on KG1.
Flashed intratechs KI8 all good.
Flashed cfroot for KI8 had to factory reset to get root to work.
All was good at this point.
Flashed siyah 1.8 kernel all good.
CWM backuped.
CWM flashed % battery mod and stuck on Samsung logo at boot.
CWM restore still stuck at Samsung logo at boot.
Tried lots of things to fix but no go.
CWM restore of KG1 and all good again.
Still trying to work out what went wrong and will post the fix when/if I find out.
Sent from my GT-I9100 using XDA App
I have this problem too. For some reason, the only rom I can flash is Cognition 1.6 . The rest seem to just get stuck at the Galaxy S2 logo
hey guys
My samsung galaxy s3 GT-i9300 will not boot up ,only shows the samsung logo
after trying to ROOT my device the problem came in
i tried flashing stock firmware using odin nothing works
and after trying to flash the firmware my samsung has gone even worse it now says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN"
i cannot get into recovery because it do not not work!!
The only thing that works is download mode
HELP ME PLEASE
5AL3H said:
hey guys
My samsung galaxy s3 GT-i9300 will not boot up ,only shows the samsung logo
after trying to ROOT my device the problem came in
i tried flashing stock firmware using odin nothing works
and after trying to flash the firmware my samsung has gone even worse it now says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN"
i cannot get into recovery because it do not not work!!
The only thing that works is download mode
HELP ME PLEASE
Click to expand...
Click to collapse
As long as you can get in downloadmode you`re oke. Look om www.sammobile.com/firmware for the stock rom you need (country or region you live in) and flash it with Odin. See item 3 in my signature for a detailled tutorial how to do that. You might need a jig however, but try getting in downloadmode manualy for now.
Stock firmware follow instructions .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
I have a similar problem
My S3 does not work after I root it, please give me a instruction link to recuse it. Thanks.
I tried flashing (Odin v3.04) the official 4.1.1 after trying the official 4.1.2 and now neither of them work. I am constantly stuck at the "SAMSUNG" logo boot stage.
I can enter download mode fine and also recovery mode but I am stumped on what to do to fix the problem.
Does anyone have a fix?
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
That' did the trick... thanks!!!
err....
Having the same problem, after flashing stuck at samsung logo...cant but into recovery to do dalvik or anything else but can access download fine.I need to use my phone so replies are apprecciated :l.
Edit: Found more updated version of stock firmware from sammobile, will try that tomorrow and post results.I hope this works, though the problem may be because I cant wipe the dalvik or data because I cant access recovery, I was previously running cm10.1 nightlies and trying to get back to stock.
same problem
aaronq48 said:
Having the same problem, after flashing stuck at samsung logo...cant but into recovery to do dalvik or anything else but can access download fine.I need to use my phone so replies are apprecciated :l.
Edit: Found more updated version of stock firmware from sammobile, will try that tomorrow and post results.I hope this works, though the problem may be because I cant wipe the dalvik or data because I cant access recovery, I was previously running cm10.1 nightlies and trying to get back to stock.
Click to expand...
Click to collapse
same thing happened to me, I was running AOKP, i've tried everything......
successful reboot.thanks mikep99.
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
my GT-I9300 cannot even boot into recovery mode,what shell i do?
GT-i9300 stuck at the startup logo
Hi Guys
My GS3 is stuck at the boot logo. I've read and done all but with no luck,
First problem:
EFS error:
"Fake IMEI (usually 004999010640000)
Not registered to network
Fake Serial Number (usually 0000000)"
Now: stuck on boot logo.
I followed the forum for GT-i9500 thinking this would resolve my efs error. http://forum.xda-developers.com/showthread.php?t=2392632
I did the following:
1. installed PhoeniX.ROM.EFS.Backup.S4
2. Extracted the efs backup tar file & created a folder in the root called efsbackup & copied all extracted files to it.
3. Used Root Explorer to copy all files to the efs main folder. overwriting all.
4. Used the terminal:
su
busybox chown 1001:1001 /efs/nv_data.bin
busybox chmod 06755 /efs/nv_data.bin
5. rebooted.
nothing happened I was still stuck with the efs error
Now I entered safe mode, and nothing i could do, used the hold power button + restart.
now I'm in my second problem, stuck at the boot logo.
I can go to recovery & download mode....
Please help, i really need it hey
Use the link in my signature to navigate to the sticky roll-up thread. Look for the imei thread. Read it.
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Tried it , and didn't work
KiDo3Konvict said:
Tried it , and didn't work
Click to expand...
Click to collapse
Service centre paid for repair then
JJEgan said:
Service centre paid for repair then
Click to expand...
Click to collapse
that's the main problem , living in a 3rd world , means there's no service center here
gee2012 said:
As long as you can get in downloadmode you`re oke. Look om www.sammobile.com/firmware for the stock rom you need (country or region you live in) and flash it with Odin. See item 3 in my signature for a detailled tutorial how to do that. You might need a jig however, but try getting in downloadmode manualy for now.
Click to expand...
Click to collapse
I realize it's Saturday, July 26, 2014 - But I had this exact same problem a moment ago; I got out of it by flashing a different recovery with Odin v3.09. I've got soft bricked staring down "Recovery Booting" and that's it. I had download mode available, so went to CWM 6.0.4.5 from TWRP 2.7.1.0. I must admit I thought flashing my HTC Titan I via Goldcard was hard, but this is ridiculous which my SG3 has presented just to get something other than Android Recovery 3e. I got Knox disabled, the device rooted despite being 4.3, but it begs the question what's the point of updating to 4.4.x if going backwards becomes an act of God doing it. Update: Another attempt did not fix the booting problem; however it is a solution to get out of the recovery booting and boot into a normal startup and back to your phone being usable from whatever launcher you use (Nova in my case) It will return to normal startup once you do this if it becomes necessary to do so, which is a bit of a sigh of relief. I'm about at wit's end. One problem gets solved but the moment I ran Towelroot which really worked, new issues keep popping up. Is there a way to look at the bootloader or what OS update created this Knox monstrosity and made our lives much harder than it has to be. I don't mean to sound like I'm asking a stupid question but is there an apk or a procedure within whatever flavor recovery we use that will perform the equivalent of the Task29 we use to perform on the HD2, something that will wipe these devices down to their baby butts and start over; thanks?
Hey visit link sure it will work for you.
http://forum.xda-developers.com/showthread.php?t=1804117
Hit Thanks?
Sent from my GT-I9300 using XDA Free mobile app
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
:good::good::good::good:
mikep99 said:
Wipe dalvik and cache through recovery.
If that doesnt work, full wipe.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thank you son, God bless you. Sometimes, you simply forget about the simple tricks. Thanks again
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
muxammle said:
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
Click to expand...
Click to collapse
try reinstall a stock rom, check if everythings is fine then reinstall CM9
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
muxammle said:
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
Click to expand...
Click to collapse
You should reinstall everything from the scratch mate, so revert your device at stock (using odin), then flash the correct [email protected] kernel and finally if everything is working flash cm9.
Edit: if your device is locked i think you can unlock it easily, search in the forum you can find out everything you need for this.
Sent from my GT-I9300 eating Jelly Bean
sorry mate ..
i am a complete noob, i dont know how to revert to stock rom, stock recovery and unroot my device
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Update 2: Okay now I have Installed my stock firmware and it seems to be working now.. But should I risk installing the CM9 again ?
muxammle said:
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Click to expand...
Click to collapse
- launch Odin
- load that ONE FILE on PDA section
- put your phone in download mode (volume down+home+power)
- connect the phone to computer, wait for drivers to be installed and ODIN to find your phone (you will see a message in Odin)
- click start
- don't touch the phone until it's done. It will boot alone
Also, it might be a good idea to wipe data / reset to factory before and after flash.
You could find all this info with google ....
On the topic, I have a similar issue. My phone was factory unlocked , and got locked after flashing latest stock firmware. Downgrading didn't solved anything. I am searching the forums right now, but it seems like all fixes are dated.
If anyone could point me in the right direction, it will be appreciated.
Thx
Hey rsndetre,
Thnx for the post, but sorry I already did that and it worked ..
Here are the method I used to get back my device back to normal and got my sim card working and again reinstalled cm9
1- Downloaded Toolkit from http://forum.xda-developers.com/showthread.php?t=1703488
2- Flashed Stock Boot Image
3- Flashed Stock Recovery Mode
4- Downloaded stock firmware from http://fus.nanzen.se/
5- Flashed stock firmware using Odin (your method above)
6- Rooted the device again (using odin and CF-Root-SGS3-v6.4)
7- Downloaded and placed cm9 and google apps package in SDCARD
8- Installed Rom Manager from Play Store.
9- Downloaded and Installed ClockWorkMod from rom manager and booted to recovery mode using RomManager
10- Then factory resetted, formatted the cache and installed the CM9 and GAPPS V11
Then my phone was good to go.
My phone is up and running, thanks rsndetre, Arsaw and TecQuality for your replies. I appreciate your time
Thanks
Muzammil Ahmed.
Hi all,
I have a i9100P (with NFC) and it is stuck at the boot screen with the yellow triangle after I installed CWM using this method here:
galaxys2root (DOT) com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/
I can still enter Download mode and even the installed CWM, but i cannot boot into android, its just stuck on the screen
I have searched on the internet for a solution, and i cannot find a solution for this
would installing a new ROM via an SD card work? What shall i do?
HELP me PLS!!
thanks in advance!!!!
Carlover1998 said:
Hi all,
I have a i9100P (with NFC) and it is stuck at the boot screen with the yellow triangle after I installed CWM using this method here:
galaxys2root (DOT) com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/
I can still enter Download mode and even the installed CWM, but i cannot boot into android, its just stuck on the screen
I have searched on the internet for a solution, and i cannot find a solution for this
would installing a new ROM via an SD card work? What shall i do?
HELP me PLS!!
thanks in advance!!!!
Click to expand...
Click to collapse
Quote taken from site:
Galaxy S2 Reference
You will need a rooted Galaxy S2 to install all ROM/kernels.
NOTE: PLEASE ONLY INSTALL ROMS INTENDED FOR YOUR VERSION OF Galaxy S2! Otherwise you WILL BRICK YOUR PHONE and I will not be responsible! ALL ROMs on this site are ONLY for Verizon Galaxy S2!
First time to rooting and custom ROMs?
Please see our FAQ for your Galaxy S2 model FIRST!!!:
Click to expand...
Click to collapse
I wouldn't have tried this as your phone is i9100P, although I know the difference isn't that big.
Also, was your phone rooted? It had to have been rooted beforehand.
oddlyshapedstickman said:
Quote taken from site:
I wouldn't have tried this as your phone is i9100P, although I know the difference isn't that big.
Also, was your phone rooted? It had to have been rooted beforehand.
Click to expand...
Click to collapse
Hi, yes it was rooted prior to this, but i thought the only difference was that the P version had NFC - but now it seems I am stuck at the boot screen - any ideas? I would appreciate it a lot!
Flash your stock ROM and check it it works.
Stileth said:
Flash your stock ROM and check it it works.
Click to expand...
Click to collapse
Hi, thanks for the reply - i will try flashing it after i finish downloading it. I presume I will have to do the usual wipe data, clear cache etc?
"I searched all over the internet and couldnt find a solution"
Biggest load of crap Ive read on here.
Sent from my GT-I9100 using xda premium
Carlover1998 said:
Hi, thanks for the reply - i will try flashing it after i finish downloading it. I presume I will have to do the usual wipe data, clear cache etc?
Click to expand...
Click to collapse
Yes, that should help. Btw what version you are downloading? 4.0.3 or 4.0.4?
Stileth said:
Yes, that should help. Btw what version you are downloading? 4.0.3 or 4.0.4?
Click to expand...
Click to collapse
I am downloading 4.0.3 from here: devsrom4android.blogspot (DOT)co (DOT) uk/2012/06/i9100pxxlph-o2-uk-samsung-galaxy-s2-gt.html
4.0.3 is what I previously had, and I believe that was the exact firmware I had on the phone (o2 NFC version)
Carlover1998 said:
I am downloading 4.0.3 from here: devsrom4android.blogspot (DOT)co (DOT) uk/2012/06/i9100pxxlph-o2-uk-samsung-galaxy-s2-gt.html
4.0.3 is what I previously had, and I believe that was the exact firmware I had on the phone (o2 NFC version)
Click to expand...
Click to collapse
That's your problem. You were on 4.0.3, which is ICS.
The instructions at galaxys2root.com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/ don't specify, but they are for Gingerbread ONLY. The recovery kernel contained within that zip package is ClockworkMod Recovery 4.0.1.4, which is for Gingerbread.
This thread (http://forum.xda-developers.com/showthread.php?t=1118693) is the updated version of that recovery kernel for ICS.
You don't have to flash the full firmware, just flash a kernel that is meant to work with ICS and you should be fine.
ctomgee said:
That's your problem. You were on 4.0.3, which is ICS.
The instructions at galaxys2root.com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/ don't specify, but they are for Gingerbread ONLY. The recovery kernel contained within that zip package is ClockworkMod Recovery 4.0.1.4, which is for Gingerbread.
This thread (http://forum.xda-developers.com/showthread.php?t=1118693) is the updated version of that recovery kernel for ICS.
You don't have to flash the full firmware, just flash a kernel that is meant to work with ICS and you should be fine.
Click to expand...
Click to collapse
Thanks for the advice - but i already have the stock ROM on an SD card so i think i will flash this. Problem is i cannot get CWM to read from the external SD card, so i cannot locate the zip and install it - help?
EDIT: if i install the kernel you gave me the link to ([KERNEL][ICS] ClockworkMod Recovery 5.5.0.4) , will it remove the root access i had?
EDIT 2: I have just flashed the kernel via odin, and it finally got past the screen with the yellow triangle! However, it is now stuck on the second screen which shows the 'S' logo with the words 'Samsung Galaxy SII' under it. Any more ideas?
Carlover1998 said:
Thanks for the advice - but i already have the stock ROM on an SD card so i think i will flash this. Problem is i cannot get CWM to read from the external SD card, so i cannot locate the zip and install it - help?
EDIT: if i install the kernel you gave me the link to ([KERNEL][ICS] ClockworkMod Recovery 5.5.0.4) , will it remove the root access i had?
EDIT 2: I have just flashed the kernel via odin, and it finally got past the screen with the yellow triangle! However, it is now stuck on the second screen which shows the 'S' logo with the words 'Samsung Galaxy SII' under it. Any more ideas?
Click to expand...
Click to collapse
Can you boot to recovery? If so, you can try a factory reset/wipe data. You'll lose all your data, (not counting pictures/media) but at this point, do you have anything to lose?
ctomgee said:
Can you boot to recovery? If so, you can try a factory reset/wipe data. You'll lose all your data, (not counting pictures/media) but at this point, do you have anything to lose?
Click to expand...
Click to collapse
I just tried that, i can boot into the new cwm - have nothing to lose since i've only had it for about 3 days - however even after the wipe data, cache and dalvik it is still stuck on the 'S' screen now
Carlover1998 said:
I just tried that, i can boot into the new cwm - have nothing to lose since i've only had it for about 3 days - however even after the wipe data, cache and dalvik it is still stuck on the 'S' screen now
Click to expand...
Click to collapse
Well, now I'd say you need to flash a full firmware. You said you downloaded I9100PXXLPH from here? Should work. But you'll no longer be rooted, and you won't have CWM recovery.
How did you get into this in the first place? You wanted CWM recovery?
ctomgee said:
Well, now I'd say you need to flash a full firmware. You said you downloaded I9100PXXLPH from here? Should work. But you'll no longer be rooted, and you won't have CWM recovery.
How did you get into this in the first place? You wanted CWM recovery?
Click to expand...
Click to collapse
I will be sure to try that, and basically earlier today i rooted it successfully, and then i had to get CWM onto it so i could start flashing new ROMs etc, and i tried installing CWM via that method that has now caused all of this
Never the less i will try your suggestion, so should i basically mount usb from CWM, then copy the firmware over to the phone, unmount, and then wipe, and then flash it finally?
EDIT: it wont allow me to mount USB in CWM
can i just flash the ZIP using odin in download mode, or does it have to be a .tar file?
Carlover1998 said:
I will be sure to try that, and basically earlier today i rooted it successfully, and then i had to get CWM onto it so i could start flashing new ROMs etc, and i tried installing CWM via that method that has now caused all of this
Never the less i will try your suggestion, so should i basically mount usb from CWM, then copy the firmware over to the phone, unmount, and then wipe, and then flash it finally?
Click to expand...
Click to collapse
No. That download is for a package that must be flashed while the phone is in download mode. That will require you to use a computer, and a flashing tool, such as Odin or Heimdall.
ctomgee said:
No. That download is for a package that must be flashed while the phone is in download mode. That will require you to use a computer, and a flashing tool, such as Odin or Heimdall.
Click to expand...
Click to collapse
How would I go about flashing it in download mode, i really have no idea as I don't think you can flash zip files in odin, forgive me for all of the questions I really appreciate your help!
EDIT: I have unzipped the file and hooray lies in it the .tar.md5 file! I am in the middle of flashing this and will report back on results
Thanks a lot guys!!
THANKS GUYS FOR ALL OF YOUR HELP, my SII is now working fully again! Cheers to all that helped, flashing the stock firmware worked with wipe/cache
Can't thank you enough!
Last thing if you don't mind, i want to root it again using this: (http://forum.xda-developers.com/showthread.php?t=1321582)
Now after that, how can i install CWM without getting into the mess i got into today? cheers!
Nope, I think that's for GB. For easy root use method 1 from 1st guide in my signature.
Stileth said:
Nope, I think that's for GB. For easy root use method 1 from 1st guide in my signature.
Click to expand...
Click to collapse
But it appears that this will not give you permanent CWM recovery. Which is what I think he wants.
ctomgee said:
But it appears that this will not give you permanent CWM recovery. Which is what I think he wants.
Click to expand...
Click to collapse
Well I think Chainfire's CF-Root kernels (http://forum.xda-developers.com/showthread.php?t=1103399) are not for i9100P, so not sure if he can achieve permanent CWM recovery. Anyway if he don't plan to flash every hour new ROM he should be fine with latest temporary CWM 6: http://forum.xda-developers.com/showthread.php?t=1840223 although will ask Phil about compatibility.
Hello
I've accidentally flashed a wrong cwm-recovery (meant for some other phone)
After the installation I've rebooted into recovery and it booted the one I already had (that's when I understood it's the wrong one)
Then I've tried to reboot back to my rom but it got stuck on the rom's loading screen
Tried to flash a new rom after using gs2RomWipe
Tried to restore from a nandroid backup
all of them gave the same result.. stuck on the loading screen
Now to my question...
If I flash a stock Rom via Odin.. will it be enough? will I be able to reroot and use my phone normally again?
Or is there an easier way maybe?
i did the same today..
all the time bootloop..
flashing same rom that i was using did not helped..
flashing some other rom helped but cant call cause phone dont see simcard..
flashing some other roms like cyanogenmod also stuck my on bootloop..
I am pretty sure you have to flash via odin.
Update...
I've flashed a stock rom via Odin but it went into a bootloop
when I've entered recovery it said E:failed to mount efs (invalid argument)
so far I've found no way to make the phone work
please help
PureMind0 said:
Update...
I've flashed a stock rom via Odin but it went into a bootloop
when I've entered recovery it said E:failed to mount efs (invalid argument)
so far I've found no way to make the phone work
please help
Click to expand...
Click to collapse
If you are using i9100.
Then flash philz kernel via odin.
Then boot into recovery.
MOUNT usb storage
Place any rom zip in the root of ex sd card
Flash it with full wipe
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
If you are using i9100.
Then flash philz kernel via odin.
Then boot into recovery.
MOUNT usb storage
Place any rom zip in the root of ex sd card
Flash it with full wipe
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
It doesn't work...
stock rom wont start, restored nandroid wont start, philz + new rom wont start
I have efs backup as tar.gz but didn't find a normal guide on how to use it without the phone working (i.e adb)
I'm not even sure if the problem is because of the efs missing or not but it seems to be the problem
PureMind0 said:
It doesn't work...
stock rom wont start, restored nandroid wont start, philz + new rom wont start
I have efs backup as tar.gz but didn't find a normal guide on how to use it without the phone working (i.e adb)
Click to expand...
Click to collapse
Ok.
Lets make it clear.
After flashing philz which rom did u flash?.
U should have not got any problem.
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Ok.
Lets make it clear.
After flashing philz which rom did u flash?.
U should have not got any problem.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I've flashed ReVolt JB version
the result was the same as any other method I've tried so far..
stuck on loading screen / bootloop
PureMind0 said:
I've flashed ReVolt JB version
the result was the same as any other method I've tried so far..
stuck on loading screen / bootloop
Click to expand...
Click to collapse
Ok.
Do this.
Boot into recovery
Wipe cache
Wipe dalvik cache
Factory reset/wipe data
Format system
Format preload
Format data
Install philz kernel
Boot into recovery
Select wipe data/factory reset-clean to install a new rom
Install any custom stock rom like neat rom, vivekrom , biftor (choose any one)
Reboot
I assume you are using gti9100
Report back.
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Ok.
Do this.
Boot into recovery
Wipe cache
Wipe dalvik cache
Factory reset/wipe data
Format system
Format preload
Format data
Install philz kernel
Boot into recovery
Select wipe data/factory reset-clean to install a new rom
Install any custom stock rom like neat rom, vivekrom , biftor (choose any one)
Reboot
I assume you are using gti9100
Report back.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I did everything you said. installed Bitfor rom
got the same result.. still stuck on loading screen
Thanks a lot for your help it's much appreciated
hope I'll be able to solve this somehow
PureMind0 said:
I did everything you said. installed Bitfor rom
got the same result.. still stuck on loading screen
Thanks a lot for your help it's much appreciated
hope I'll be able to solve this somehow
Click to expand...
Click to collapse
First boot takes 5/7 min.
Wait
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
First boot takes 5/7 min.
Wait
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
still nothing...
and it usually takes 1-2 mins max for me
also doesn't explain why stock from odin wont work
It seems to me that I need to somehow fix the efs folder but no idea how to do that
almost all the guides I've seen about that requires the rom to work and use root explorer
the others wasn't clear enough or just not related
according to the shell commands my efs folder is empty
copying the efs folder I have on my sdcard doesn't help because it's not there after reboot
I have a tar.gz as well but not sure how to use it
can I flash the .tar via odin? or some other solution with adb/shell?
or do you think it has nothing to do with my problem?
anyone have any idea how to help me???
I've tried many different ways but my device just wont make it past the loading screen of the rom (doesn't matter which one)
I really have no idea what can cause this problem
thought that flashing stock rom via Odin should fix it but it doesn't help
I've tried some methods I've seen to fix efs problems but so far nothing helped
I'm really desperate at the moment :\
download mode and flash the cwm kernel via Odin should work.
Sent from my GT-I9100G using xda app-developers app
i am facing exact same problem
and it also start with flashing cwm for kitkat
nothing working now stock or custmised rom
hope some one can help us to fix it
Any more ideas??
If I take it to my carrier company, will they be able to make it work with their official rom?
PureMind0 said:
Any more ideas??
If I take it to my carrier company, will they be able to make it work with their official rom?
Click to expand...
Click to collapse
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
casperusm said:
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
Click to expand...
Click to collapse
Good luck!
I should send mine tomorrow and hopefully they can fix it
update when you get yours back
casperusm said:
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
Click to expand...
Click to collapse
Did you get your device fixed?
OK.....just a quick thing......Odin flashing a normal single file stock firmware *may* not be the solution as it just overwrites what is already there during the flash. I will provide a link to a three part firmware that wipes the old as it flashes.....this essentially flashes the firmware onto 'pristine' memory partitions....it *might* help......
Here's the link.....
http://www.mediafire.com/?1z5ao5b6r594x45
Search for @Hopper8s Odin troubleshooting guide for instructions on how to flash it.....
Good luck.....
This might be my S2, or it might be my W...but it's definitely CM