Related
Can't post in the development section.
I followed the linked instruction (1b.)
But after all, my WLAN is not working. When I want to activate it, it shows "Error".
What I can do?
Edit: I fixed the problem by flashing a kernel update manually in Adnroid mode by using Flash Image GUI. I am S-ON, so a kernel update in recovery is not allowed.
So here is the better instuction to install mwakious3Drom® (M3DR®) V.11.4 with S-ON and HTC Unlock Method with newer HBoot:
1. Copy v11 and v11.4 on SD-Card
2. wipe user data and clean cache & dalvik
3. install v11
4. boot into Android mode
5. reboot into Android mode
6. install the app Flash Image GUI (You can find it in this forum. I can't link to it because I have less then 10 posts....)
7. download one of the two kernel patches for v11.4 in the ROM-thread an copy to SD-Card
8. reboot into recovery mode
9. clean cache & dalvik
10. install v11.4
11. boot into Android mode and activate root and beats
12. reboot
13. start Flash Image GUI allow superuser permissions and click on browse, search the kernel patch (zip-file) and now click on "flash image"
14. reboot into Android mode
15. again reboot into Android mode
16. finished
If you are allready on v11.4 with the WIFI-Error do this:
1. install the app Flash Image GUI (You can find it in this forum. I can't link to it because I have less then 10 posts....)
2. download one of the two kernel patches for v11.4 in the ROM-thread an copy to SD-Card
3. start Flash Image GUI allow superuser permissions and click on browse, search the kernel patch (zip-file) and now click on "flash image"
4. reboot into Android mode
5. again reboot into Android mode
6. finished
No one else with this problem?
I reinstalled v11 and v11.4 now 3 times and I get every time the same error on v11.4. On v11 WLAN is working.
Still have the problem. V11.2 is working for me but with v11.3 and v11.4 WLAN is not working.
Try to use wifix manager
Sent from my HTC EVO 3D X515m using xda premium
Not working on v11.4. Again shows only "Error".
Edit: I fixed the problem by flashing a kernel update manually in Adnroid mode by using Flash Image GUI. I am S-ON, so a kernel update in recovery is not allowed.
So here is the better instuction to install mwakious3Drom® (M3DR®) V.11.4 with S-ON and HTC Unlock Method with newer HBoot:
1. Copy v11 and v11.4 on SD-Card
2. wipe user data and clean cache & dalvik
3. install v11
4. boot into Android mode
5. reboot into Android mode
6. install the app Flash Image GUI (You can find it in this forum. I can't link to it because I have less then 10 posts....)
7. download one of the two kernel patches für v11.4 in the ROM-thread an copy to SD-Card
8. reboot into recovery mode
9. clean cache & dalvik
10. install v11.4
11. boot into Android mode and activate root and beats
12. reboot
13. start Flash Image GUI allow superuser permissions and click on browse, search the kernel patch (zip-file) and now click on "flash image"
14. reboot into Android mode
15. again reboot into Android mode
16. finished
Thank you op for putting your solution to help the next person.
Save the Drama for your Mama with Tapatalk 2
i ve the same problem but i dont want to loose data
isnt there any other solution?
Thank-you for this help.
Sent from my HTC EVO 3D X515a using xda app-developers app
I also have a problem Viber :crying:
I use it every day
manuelbvb said:
i ve the same problem but i dont want to loose data
isnt there any other solution?
Click to expand...
Click to collapse
You can flash the kernel without a wipe. :good:
ok i've changed kernel now, but whats now the difference?
wlan is working now, but why? i don't understand it
manuelbvb said:
ok i've changed kernel now, but whats now the difference?
wlan is working now, but why? i don't understand it
Click to expand...
Click to collapse
This is allready answared by Recognized Developer ( /showpost.php?p=18793336&postcount=2 )
The WiFi error is caused by a mismatch between the WiFi module and the currently loaded kernel. The WiFi module is stored in /system/lib/modules/bcm4329.ko . The kernel is stored in the boot partition.
When booted into the custom recovery through the traditional methods, reboot recovery, bootloader -> recovery, etc., HTC unlock method does not unlock *kernel* write access but does unlock *system* write access.
The result is the kernel module for WiFi is loaded but the kernel itself is not loaded. This creates a mismatch between a WiFi module loaded from the ROM and the matching kernel not being loaded as HTC does not allow it to be loaded from the traditional recovery boot method.
Click to expand...
Click to collapse
Hope you understand this. :good:
Using Flash Tools to Flash TWRP Recovery to A116
Requirements:
TWRP Rewcovery
Flash Tool
A computer
A Micromax A116 (obviously)
Steps:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with TWRP recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
Auto Root Installation:-
This version has the built-in Auto-Root feature for non-rooted devices...
Steps :
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
Downloads :
TWRP Rrecovery :
http://d-h.st/IsY
Kernel Sources :
http://yadi.sk/d/fmIOi_ee6ADpi
MT6589 Scatter File :
https://www.dropbox.com/s/p0oc0769t5igt8s/MT6589_Android_scatter_emmc.txt
SP Flsh tools:
http://www.mediafire.com/?7ccl2tw67tklxdk
Drivers:
http://www.mediafire.com/download.php?nv96xclhjmaiclu
64bit drivers:
http://forum.xda-developers.com/showthread.php?t=2206421
TWRP is tested working.
Changelog :
[23/05/2013]
1. TWRP Updated to 2.5.0.0
2. Auto Root Fixed
Credits:
TWRP Tool- yuweng
Testing And Screenshots- Mohammad Abdul Sajid, Vijay
Press Thanks button if I helped!!
Great !!
lol. Installed the newer version of CWM just 5 minutes back. Installing TWRP now. lol. Wish i had seen this post before.
Can anyone make flushable zip to flash it via can recovery...
Sent from my Micromax A116 using Tapatalk 2
Abhiroxx said:
Can anyone make flushable zip to flash it via can recovery...
Sent from my Micromax A116 using Tapatalk 2
Click to expand...
Click to collapse
+1 for this..
Sent from my Micromax A116 using xda app-developers app
reboot problem
hi
i seem to be having some problem rebooting system does it take some time to reboot i waited for some time it did not reboot and then i pulled out the battery and booted the phone kindly advise on the same
thanks in advance:good::laugh:
After installing TWRP recovery successfully........it doesnt happen automatically when i reboot the phone as below.
Then i tried to install the SuperSU and BIN files thru Recovery, and SuperSu can be found in the App drawer. but the Phone is not rooted when i check thru rootchecker. and even Titanium backup or any other app cant work which require root access.
Pls tell me, how to successfully ROOT the phone. Even SuperSU installed, it cant update the binary.
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
kumar abhishek said:
Using Flash Tools to Flash TWRP Recovery to A116
Steps:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with TWRP recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
Auto Root Installation:-
This version has the built-in Auto-Root feature for non-rooted devices...
Steps
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
TWRP is tested working.
[/COLOR]
Credits:
TWRP Tool- yuweng
Testing And Screenshots- Mohammad Abdul Sajid, Manoj Nair
Uploading- Kushal Gupta
Press Thanks button if I helped!!
Click to expand...
Click to collapse
peekeje said:
After installing TWRP recovery successfully........it doesnt happen automatically when i reboot the phone as below.
Then i tried to install the SuperSU and BIN files thru Recovery, and SuperSu can be found in the App drawer. but the Phone is not rooted when i check thru rootchecker. and even Titanium backup or any other app cant work which require root access.
Pls tell me, how to successfully ROOT the phone. Even SuperSU installed, it cant update the binary.
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
Click to expand...
Click to collapse
First of all please dont quote whole post.
It has been confirmed that there is some problem with autoroot
Pls follow root procedure posted in cwm thread
Sent from my C6502 using Tapatalk 2
kumar abhishek said:
First of all please dont quote whole post.
It has been confirmed that there is some problem with autoroot
Pls follow root procedure posted in cwm thread
Sent from my C6502 using Tapatalk 2
Click to expand...
Click to collapse
Sorry to quote full.
I tried also the CWM procedure... and flashed both the SU and BIn files. and after reboot, its there in the app drawer. And when i open the SU, and try to update binary also, it fails.
Also, root checker says, Not root access.
can we use mobile uncle tools to flash this......
mohsin2cool said:
can we use mobile uncle tools to flash this......
Click to expand...
Click to collapse
Nope you need SP Flash Tool. Mobile uncle has some problems with mt6589 chipset
Sent from my C6502 using xda premium
Hi,
I guess the screenshots are for TWRP v2.4.2.0.
Thanks!
eagledipesh said:
Hi,
I guess the screenshots are for TWRP v2.4.2.0.
Thanks!
Click to expand...
Click to collapse
Yup i updated TWRP to 2.5 but not the screenshots
Sent from my C6502 using xda premium
kumar abhishek said:
Yup i updated TWRP to 2.5 but not the screenshots
Sent from my C6502 using xda premium
Click to expand...
Click to collapse
Ha ha ha, cool then, i thought its a new thread, what is the major difference if i upgrade?
@kumar abhishek
how were you able to keep the size of this twrp recovery to just within 6mb?.
from what i have checked on the porting tool of yuweng, twrp 2.5.0.0 requires the recovery partition to be adjusted to 7mb?
i am trying to port twrp for the a919i which is similar to the a116 hd.
tia
cant see SD
hi
i flashed the twrp and the root also done thanks
but this does not show the external SD do i need to do any thing to see it
any way i have flashed the SD swap and it is also working fine
thanks again for ur great contribution:good::laugh:
haree said:
hi
i flashed the twrp and the root also done thanks
but this does not show the external SD do i need to do any thing to see it
any way i have flashed the SD swap and it is also working fine
thanks again for ur great contribution:good::laugh:
Click to expand...
Click to collapse
Problem is due to sd swap only
Sent from my C6502 using xda premium
kumar abhishek said:
Problem is due to sd swap only
Sent from my C6502 using xda premium
Click to expand...
Click to collapse
hi
u got me wrong i did the swap after initaly flashing and not seeing the external sd
and the SWAP is working fine now i have 32GB internal storage
thanks...
Upgraded from CWM to TWRP using Mobileuncle tools successfully... thanx
Hey if have to root and install twrp recovery in Samsung galaxy star pro GT-S7262
With this method you can easily root and enter into the recovery
Follow These Steps:
Download Link: see the reply to this post below.
EXTRACT THE DOWNLOADED ZIP FILE.
YOU GET THESE FILES:
1.Odin3_v3.10.7(Flashing Tool For Windows)
2.GT-S7262_4.1.2.tar
3.twrp-s7262.tar.md5
4.SuperSU.zip
5.quickboot.apk
6.Samsung-Usb-Driver-v1.5.49.0.exe
Steps to root and Install Twrp Recovery on GT-S7262
1.install samsung usb driver and open odin tool and click on AP and browse for downloaded file-GT-S7262_4.1.2.tar and click open.
2.now reboot your device in download mode and connect to pc.
3.odin will show added.
4.now click on start.
5.when it shows green pass then disconnect you phone and reboot.
Now your phone is rooted
6.rebot your phone once again in download mode and connect to pc and flash twrp-s7262.tar.md5 as AP (make sure to untick Auto Reboot in odin).
7.after its completed reboot and install quickboot,apk after install open quickboot app and grant superuser access.
8.now tap on recovery option and it will take you to the twrp recovery .
If you have to get supersu (recomended) then flash SuperSU.zip in twrp recovery .
PLEASE HIT THANKS IF IT HELPED!
DOWNLOAD LINK:http://usercloud.net/3m7
Thanks
INSTALL CUSTOM ROMS USING BELOW INSTRUCTIONS
Note -1. Before Doing These Steps Your device bootloader should be unlocked. otherwise you may brick your device.
2. Install Adb drivers on windows if you are using windows or if you are using linux install adb drivers in linux
INSTALLATION PROCEDURE
1. Download Custom Roms i will provide the links by the end
2. download TWRP
3. Example iam On Stock rom
4. Now i want to Flash Any one of custom rom but how?
> Be ready with Any custom Roms from below example i wilL Flash Pixel Experience Rom
> Be ready with twrp-3.3.0-0
>Turn of your phone and switch to download Mode & Connect phone to pc
4. Now flash twrp using cmd command "fastboot flash boot twrp.img"
5. now your phone boots to twrp
6. now copy the custom rom to phone using twrp dont worry mtp working
7. flash the rom and wait or 5 min for installing
8. now check your slot example iam on Slot A
9. now tap on reboot to recovery now you will again boot in to twrp
10. now change the slot from A to B by tapping reboot ,slot B
11. now you are on slot B now flash gapps for all the roms except Pixel Experience and flash magisk for root if you want using magisk manager zip file
12. now click on wipe & advance wipe now wipe all except system & vendor and tap on reboot system
13. now you people will see pixel experience Boot animation wait for 7 min to boot up and the rom is yours and same method for all custom roms installation
Click here For Custom Roms Links Please Hit Thanks Button If You Understand My Guide. Keep Going...!!!
Thank you
Thanks a lot for spending time on these guides! Made the process simple for even new comers!
Ah, So You've rooted your 6.1 Plus/X6 but don't know how to Install stock or having troubles with it? I'm here to help!
*All of the instructions and procedures below requires an unlocked bootloader. If you do not have an unlocked bootloader, Please refrain from asking about it here.
*Not having an unlocked bootloader and following this will definitely brick your phone. You have been warned.
Installing Stock ROM - Method 1A(Nost) --
1. Get NOST from here - NOST
2. NOST ONLY SUPPORT OREO FIRMWARE, USE OST LA FOR PIE(Not sharing cause its a patched app, Search on Google and get it from TechMesto)
3. Download unpacked oreo firmware, You can get it from - Here
4. Extract the zip on your PC
5. Put your phone in bootloader mode, Power off - Press Volume Down+Power Button.
6. Now connect it to your PC
7. Open NOST, Select the .mlf file from the folder where you extracted the Firmware
8. Now select, Normal download and Erase User data option.
9. Now click on next and wait for NOST to flash the phone. (It takes 258 seconds or 2.3 - 2.5 minutes on my laptop)
Installing Stock ROM - Method 1B(OST LA) --
Same as NOST, It has the same UI.
Except You might have to change some values in the .mlf file.
An appropriate guide for the same - Here
Installing Stock ROM - Method 2(Hikary's Generic Flashing Script) --
I recommend this method more than NOST and OST LA.
1. Get Hikary's script from - Here
2. Get unpacked Firmware from - Here
3. Extract the Firmware
4. Put the .exe file you got from Github into the folder where you Extracted the firmware
5. Run the script
6. Follow instructions on screen
7. Profit!
Thanks alot to member - Hikary for this easy to use scipt!
You've installed Stock, Now let's add some magisk to it !
*Please disable Automatic System Updates through developer options to make taking OTA .zips easier.
Installing Magisk - Method 1A(Fastboot method) -
You will need Google's ADB drivers, Which you can get - Here/
1. Extract ADB to a Folder
2. Get Magisk patched boot images from - Here Don't worry, Boot images for Nokia 7 Plus will work on DRG(6.1 Plus/X6) and PL2(6.1)
3. Open adb(Type cmd in the address bar of the folder where you extracted adb)
4. Put your device on Download mode
5. type the command
Code:
fastboot boot 'nameofbootimage'.img
6. Now your phone will boot
7. Install Latest Magisk Manger from - [https://www.github.com/topjohnwu/magisk/releases]Here[/url]
8. Open Magisk Manger, You will see Magisk is installed, But there will also be an Install Button next to it. Tap on Install.
9. Let Magisk Install and re-boot the phone
10. Viola Magisk is now permenantly available
Installing Magisk - Method 1B(TWRP method) -
You will need Google's ADB drivers, Which you can get - Here/
1. Get the latest TWRP for 6.1 Plus
2. Get the Latest Magisk Installer from - [https://www.github.com/topjohnwu/magisk/releases]Here[/url]
3. Put the .zip file to your Internal Storage/SD Card
4. Open adb and pass the command
Code:
fastboot boot "nameofrecoveryfile.img"
5. Now TWRP will open on your phone
6. Install Magisk through TWRP
7. Wipe Dalvik
8. Reboot
9. Profit
Now you've got magisk. Follow the next post to see how to take an OTA update with Magisk Installed.
Nokia 6.1 Plus is an Android One certified device. Nokia is no slouch either when it comes to issuing updates. Learn how to take OTA without losing root.
1. Turn of Auto System updates through Developer options
2. Open Magisk Manager
3. Restore Stock Images but don't reboot.
4. Download and install, Let both the steps finish i.e applying update and apps, but don't reboot.
5. Go to magisk manager and select install to inactive slot option
6. Re-boot device.
7. You've not lost root, But have root access.
Done
CarbonGTR said:
Nokia 6.1 Plus is an Android One certified device. Nokia is no slouch either when it comes to issuing updates. Learn how to take OTA without losing root.
1. Turn of Auto System updates through Developer options
2. Open Magisk Manager
3. Restore Stock Images but don't reboot.
4. Download and install, Let both the steps finish i.e applying update and apps, but don't reboot.
5. Go to magisk manager and select install to inactive slot option
6. Re-boot device.
7. You've not lost root, But have root access.
Done
Click to expand...
Click to collapse
I don't see any option to restore stock images or install to inactive slot in Magisk. Am I missing something?
Hymix said:
I don't see any option to restore stock images or install to inactive slot in Magisk. Am I missing something?
Click to expand...
Click to collapse
Open Magisk Manager, Tap on Uninstall. You will see 2 options, Complete Uninstall and restore stock images.
*Nevar tap on the complete uninstall option, It will throw your phone into bootloop
To install to inactive slot, Tap on install, You will get 2 options, Release Notes and Install. Tap on Install again and select install to inactive slot, Reboot from within Magisk Manager.
The simplest way I've found to install Stock Rom is just using adb sideload.
Boot into TWRP and wipe as you would with any custom rom.
Go to advanced and adb sideload.
Send the adb sideload command from your computer with the relevant zip file.
Doesn't require any additional softward like NOST or OST....
Hymix said:
The simplest way I've found to install Stock Rom is just using adb sideload.
Boot into TWRP and wipe as you would with any custom rom.
Go to advanced and adb sideload.
Send the adb sideload command from your computer with the relevant zip file.
Doesn't require any additional softward like NOST or OST....
Click to expand...
Click to collapse
But does it also install the bootloader and stock recovery back? If yes then I'll add it to the post above.
CarbonGTR said:
But does it also install the bootloader and stock recovery back? If yes then I'll add it to the post above.
Click to expand...
Click to collapse
That's a good question. I've just been using stock and hadn't considered it. How would one check that?
Sent from my Nokia 6.1 Plus using Tapatalk
Bluebriz said:
That's a good question. I've just been using stock and hadn't considered it. How would one check that?
Sent from my Nokia 6.1 Plus using Tapatalk
Click to expand...
Click to collapse
It's easy. Get an OTA .zip file, Re-Boot to recovery and flash it. Or Use the ADB Sideload method.
Most likely installing the OTA would fail if the device is rooted because, Magisk will patch the boot.img.
Then I'll need to wait for another update, the September one, right? Because I installed it with ADB and have Magisk installed so I don't really want to mess with it until I have to.
Sent from my Nokia 6.1 Plus using Tapatalk
Bluebriz said:
Then I'll need to wait for another update, the September one, right? Because I installed it with ADB and have Magisk installed so I don't really want to mess with it until I have to.
Click to expand...
Click to collapse
I just took an OTA with Magisk installed it went fine. (September patch)
OK, then it doesn't seem to work. Trying to follow the steps, the system update gives an installation error. I'm guessing that somewhere along the road I've messed something up, so it seems stock rom and Magisk isn't an option for me.
Hymix said:
OK, then it doesn't seem to work. Trying to follow the steps, the system update gives an installation error. I'm guessing that somewhere along the road I've messed something up, so it seems stock rom and Magisk isn't an option for me.
Click to expand...
Click to collapse
Restore images before you do anything, If installation fails keep trying again. It happens to me to.
CarbonGTR said:
Restore images before you do anything, If installation fails keep trying again. It happens to me to.
Click to expand...
Click to collapse
Really? I did the restore via Magisk and that seemed fine, but then the update part didn't work. It downloaded then gave the error so I quit and started again with a fresh installation, minus Magisk.
Sent from my Nokia 6.1 Plus using Tapatalk
Have you guys modified the system/vendor partition in any way? If you did, Then it will obviously fail.
@Bluebriz and @Hymix I agree. It's the september security patch causing the installation issue.
It fails for me no matter what, Unless I completely un-root. But this method works perfectly fine on the August update.
Lets see for the October patch.
Okay, I can specifically narrow this down to way the September patch. The september patch requires the August security patch as a precondition to install. And that's where something funky is happening.
Guys a quick update. October update has been released but it also fails to install. This time I've managed to find the cause, Apparently some service that needs to be used for the update is being blocked/used by Magisk. (I could be wrong here)
The error code according to the recovery is 20(kDownloadStateInitializationError)
Is there any update to this issue?
Tried removing Magisk, didn't help.
Yesterday I got November security update ..iam using magisk...so it is showing installation problem...I tried in recovery and ADB method both didn't work.. finally I ended in bootloop ...so I again installed stock ROM...any solution is there without resetting each time how to install security updates..coz each time my data balance was wasted??