hello can sum1 help me how to boot coz it suddenly crash down when i flash in kdz now the phone is dead i can't put to recovery to flash it again..help me urgent...
Have you tried SBFing it?
perryvan04 said:
Have you tried SBFing it?
Click to expand...
Click to collapse
i don't have any idea about that sir can you please explain more...
hi
i wanted yo instal miui on my huawei G610 - u20 but thanks to inpack mobile everything went wrong with mobile uncle and after rebooting my phone it went in bootloop.
after lots of reading and googling i have found a official firmware of my phone with sp_flashtool inside it with two different type :
SP_Flash_Tool_v3.1320.0.174_Secboot
and
SP_Flash_Tool_v3.1316.0.148_DLInfoV1-cust
i have followed all of correct procedure but in with sp_flash tool sec boot i encounter this error : to download code area is forbidden on this phone
and with sp_flash tool CUST it says( brom error : s_brom_download_da_failed )
and when i run a memory test it says ERROR : NAND FLASH WAS NOT DETECTED
I AM REALLY REALLY CONFUSED AND DIDNT FIND PROPER ANSWER TO THIS KIND OF QUESTION
what can i do right now?
if i format my phone in sp flash tool will it help?
Answer
is there any body out there to help me please im really stock
huawei g610-u20 bootloop
same problem here ooo, please developers help out
sp flash tool error SOLVED
Armanium said:
hi
i wanted yo instal miui on my huawei G610 - u20 but thanks to inpack mobile everything went wrong with mobile uncle and after rebooting my phone it went in bootloop.
after lots of reading and googling i have found a official firmware of my phone with sp_flashtool inside it with two different type :
SP_Flash_Tool_v3.1320.0.174_Secboot
and
SP_Flash_Tool_v3.1316.0.148_DLInfoV1-cust
i have followed all of correct procedure but in with sp_flash tool sec boot i encounter this error : to download code area is forbidden on this phone
and with sp_flash tool CUST it says( brom error : s_brom_download_da_failed )
and when i run a memory test it says ERROR : NAND FLASH WAS NOT DETECTED
I AM REALLY REALLY CONFUSED AND DIDNT FIND PROPER ANSWER TO THIS KIND OF QUESTION
what can i do right now?
if i format my phone in sp flash tool will it help?
Click to expand...
Click to collapse
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
can you plase post a link for this rom?
huawei g610-u20 stock rom
primux said:
can you plase post a link for this rom?
Click to expand...
Click to collapse
https://disk.yandex.ru/public/?hash=+LW/dwHLEePHkyWAFz1STiYZQQxjLEaYmDruPBrhVl0=
---------- Post added at 02:42 PM ---------- Previous post was at 02:38 PM ----------
thats the link! just click on the down arrow where you see скачать or google-translate the page as it is in russian.
Armanium said:
hi
i wanted yo instal miui on my huawei G610 - u20 but thanks to inpack mobile everything went wrong with mobile uncle and after rebooting my phone it went in bootloop.
after lots of reading and googling i have found a official firmware of my phone with sp_flashtool inside it with two different type :
SP_Flash_Tool_v3.1320.0.174_Secboot
and
SP_Flash_Tool_v3.1316.0.148_DLInfoV1-cust
i have followed all of correct procedure but in with sp_flash tool sec boot i encounter this error : to download code area is forbidden on this phone
and with sp_flash tool CUST it says( brom error : s_brom_download_da_failed )
and when i run a mermory test it says ERROR : NAND FLASH WAS NOT DETECTED
I AM REALLY REALLY CONFUSED AND DIDNT FIND PROPER ANSWER TO THIS KIND OF QUESTION
what can i do right now?
if i format my phone in sp flash tool will it help?[/QUOTE
Dont worry brother .restart ur computer then u try.. it worked for me.or shut down then switch on ur pc
---------- Post added at 09:45 AM ---------- Previous post was at 09:36 AM ----------
Restart ur computer then try.it worked for me..dont worry brother.i got success after tried this way.
Click to expand...
Click to collapse
SOLVED
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
KUDOS to you man... the post really helped me.. and for the IMEI, use MTK Droid Tool... Works like a charm
HawkEye said:
KUDOS to you man... the post really helped me.. and for the IMEI, use MTK Droid Tool... Works like a charm
Click to expand...
Click to collapse
you are welcome! you can just help me hit the thank button.
funloft said:
you are welcome! you can just help me hit the thank button.
Click to expand...
Click to collapse
Missed that??? sorry anyways, do you know how to unlock the bootloader of Huawei G700-U10??
HawkEye said:
Missed that??? sorry anyways, do you know how to unlock the bootloader of Huawei G700-U10??
Click to expand...
Click to collapse
nope! but i think i've come across a post online on that!
SOLVED
funloft said:
nope! but i think i've come across a post online on that!
Click to expand...
Click to collapse
I think i solved it!!! there is a portugal ROM update for that phone (it mostly is like downgrading the SW) which will automatically get the bootloader unlocked and then CWM can be flashed through mobile uncle!!!! Guess i will have to start a post on this as i see a lot of G700-U10 users around
A Heartful Thanks!!!!!
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
Your method helped me and I recovered my Huawei Ascend G700-U10 phone....irony is that my IMEI number is still present so thanks alot!!! :laugh:
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
hy bro i have same problem but this method is not working. i unchecked the preloader and pressed upgrade firmware but it says please check the necessary parts(i think).by pressing download it gives brom error.
You have saved my A** Brother. Just wow
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
Indeed you have helped. your solution just brought my cellphone back to life again from a sudden death syndrome. Manny many thanks and love.
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
thank you sooooo very much...it work..you really saved my butt in here buddy...thanks alot....godbless
Hi my friends
please help me my phone lg g2 mini is brick when i connect phone with my pc i get this QHSUSB_BULCK
Maybe this will help
abbahammou73 said:
Hi my friends
please help me my phone lg g2 mini is brick when i connect phone with my pc i get this QHSUSB_BULCK
Click to expand...
Click to collapse
I Have the same problem..what should we do now? please help US!
I flash stork KDZ but suck at 4%
dilbertms said:
I Have the same problem..what should we do now? please help US!
I flash stork KDZ but suck at 4%
Click to expand...
Click to collapse
[GUIDE]Flash KDZ Rom KitKat - Solved Stop 4%
http://forum.xda-developers.com/g2-mini/general/guide-flash-kdz-rom-kitkat-solved-stop-4-t3132852
hi every one i have an lg e460 cant start or boot,cant enter in emergency mod or recovery mode and the pc cant recongnized the despite the driver are instaled
this will be the hard brick
helpe plz
thanks
deleco said:
hi every one i have an lg e460 cant start or boot,cant enter in emergency mod or recovery mode and the pc cant recongnized the despite the driver are instaled
this will be the hard brick
helpe plz
thanks
Click to expand...
Click to collapse
Yeah that is a hard-brick.
neutrondev said:
Yeah that is a hard-brick.
Click to expand...
Click to collapse
so there is some solution for this probleme?
deleco said:
so there is some solution for this probleme?
Click to expand...
Click to collapse
I don't know for your device. Jtag. You need to open the phone for sure but I don't know any solution personally.
all thanks for you
Hello
When i try to flash my MTK 6735 with SP Flash Tool , i had this error messege : s_brom_cmd_startcmd_fail (0x7D5) ,
(Cannot pass bootrom start command! Possibly target power up to early.)
i THANK you in advance for your helps and attentions .
same problem
pajkov said:
Hello
When i try to flash my MTK 6735 with SP Flash Tool , i had this error messege : s_brom_cmd_startcmd_fail (0x7D5) ,
(Cannot pass bootrom start command! Possibly target power up to early.)
i THANK you in advance for your helps and attentions .
Click to expand...
Click to collapse
i tried to flash stock rom in my lenovo vibe k4 note multiple times ..... im getting error of power up too early as you mentioned above......did you find any solution? help plz
Leonidas3414 said:
i tried to flash stock rom in my lenovo vibe k4 note multiple times ..... im getting error of power up too early as you mentioned above......did you find any solution? help plz
Click to expand...
Click to collapse
I only used another SP Flash Tool and worked exactly as instructed
Leonidas3414 said:
i tried to flash stock rom in my lenovo vibe k4 note multiple times ..... im getting error of power up too early as you mentioned above......did you find any solution? help plz
Click to expand...
Click to collapse
I only used another SP Flash Tool and worked exactly as instructed.
pajkov said:
I only used another SP Flash Tool and worked exactly as instructed.
Click to expand...
Click to collapse
yeah.....i was using random flash tool but not the one compatible with my chipset version.....when i got this...i solved my problem
Leonidas3414 said:
yeah.....i was using random flash tool but not the one compatible with my chipset version.....when i got this...i solved my problem
Click to expand...
Click to collapse
Oh yeah, I'm happy to be successful!