Hi, I'm new to the G tab and too this forum as well, and I have a problem someone might be able to help me with, I have a Veiwsonic 10" G table and
I have managed to "muff" it up so that the only thing that happens when I try to boot eirtyher "poser on" or vol+ & power on is that I get the Magic Value mismatch message.
I like the table, so I bought another one today, but I would like to recover this one somehow and save this unit.
I have scoured the forums for simular mesaages and came up with not much usable information, "plenty of conjecture though" or guess's
I have got the rollback file from tech support, but I cant get into the system in order to do anything with it because I cant get past the "Magic Value Miscatch" message...
I would just like to roll it back to OEM
I dont mind donating some cash or paying someone to help me out, either
I could typein the hours worth of attmets and things I have tried but it seems
that there might be someone with some experience that may be able to help me
get this going in a short sweet (do this do that format)
I'll take any help I can get right now...
Regards,
Offload
nvflash from the developer page and don't use Rom Manager
yup nvflash will fix it ...make sure u are in apx mode when you do it...u can pm me if you need specific help
Got it going again, I tried folloowing the instructions but the one thing that made it work was Not, holding vol+ & power until black screen but holding vol- & power until black screen, this put me into the APX mode and I was able to run the .bat and get back to OEM...
Now I have two of these, one to fool with and one to use for work...
Thanks to the people who responded...
Regards,
Offload
Thanks offload
I just wanted to thank offload for supplying a simple note to the newbies out here. Regardless of comments that might have put him off, he found his problem and his finding alerted me to how to fix my own problem; even thought another reply made his problem seem foolish.
My problem was just as foolish yet he was kind enough to write back to tell us what fixed it for him . . . with little help from others. Thanks offload. You helped me. You're a class act.
I made the mistake of attempting to add Arabic language to my galaxy note.
In so doing, it now won't seem to turn on.
However, I can hear it connect and disconnect from the computer if I toggle the power button. I'm assuming it's continuously in the download mode until I get it out? I don't know, since nothing shows up on the screen. Am I screwed? Should I attempt a replacement?
Please help me.. if I posted in the wrong forum, please move the post.
The phone is still brand new and im really scared.
Also, if I cant do anything using software, will a jig work in my case? And if i take my phone to the samsung dealer, can they do anything to fix it? like change the internal memory or something like that?
All help is really appreciated
thank you,
e
My brother went and flashed a custom international rom. He doesnt remember which one, not that I think it matters at this point. Ive flashed many roms, I've even bricked a few phones, but with alot of reading on the xda site, and all the help from dev's have always unbricked my phone. His samsung doesnt turn on, does not go into recovery or into download mode. Ive tried taking the battery out holding both + - vol then usb then battery. nothing. When plugged into usb without battery, light turns on, when plugged into comp , comp starts looking for a driver, so i dont think its complety bricked yet, but it comes back with this message QHSUSb_dload. Ive read up on other phones on this message, any help with how to solve this. thanks
First slap him for not reading and then go to the development section of your carrier and look for fix thread for your issue I know attention has none not sure about the other carriers.
Sent from my SAMSUNG-SGH-I747 using xda app developers app
If he's seeing QHSUSB DLOAD its hard bricked. From what I've seen looking into this, I believe some HTC's have been able to be recovered from this mode but its not possible for us w/o JTAG. Someone correct me if I'm wrong and shed some light on the subject if they have any. Very intrigued by this and think that somehow an unbrick could be done with this with the right tools/knowloedge
Randomacts said:
First slap him for not reading and then go to the development section of your carrier and look for fix thread for your issue I know attention has none not sure about the other carriers.
Sent from my SAMSUNG-SGH-I747 using xda app developers app
Click to expand...
Click to collapse
I looked at my the dev section there is no fix that I could find. So I posted the question in the proper samsung galaxy section. I dont believe there is a solution yet aside from sending it in. A few posts here and there touched base on it but I dont think anyone yet on here has eff'd there phones up to this point. Ive went through every samsung section to see if there were any similar post and nothing has really touched base, on it or ive triied it.
billard412 said:
If he's seeing QHSUSB DLOAD its hard bricked. From what I've seen looking into this, I believe some HTC's have been able to be recovered from this mode but its not possible for us w/o JTAG. Someone correct me if I'm wrong and shed some light on the subject if they have any. Very intrigued by this and think that somehow an unbrick could be done with this with the right tools/knowloedge
Click to expand...
Click to collapse
Yes I found four posts about the similar qhsusb dload, and also read about jtag, already gave my brother the website url, to contact about sending the thing in. I just havent been able to find a solution on here.
well ill have to find and reread the stuff i saw abt the htc's cuz if im not mistaken some were actually made unbrickable because of this. i was able to install drivers, and talk to the phone with a couple of things, including odin but it just hung as i expected it to. I think something could be done with this, dont seem like the typical hardbrick. let a couple more people brick this thing, if its possible someone will figure it out
billard412 said:
well ill have to find and reread the stuff i saw abt the htc's cuz if im not mistaken some were actually made unbrickable because of this. i was able to install drivers, and talk to the phone with a couple of things, including odin but it just hung as i expected it to. I think something could be done with this, dont seem like the typical hardbrick. let a couple more people brick this thing, if its possible someone will figure it out
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1522351
I believe this is the post your talking about. Anyways I just can't believe the broski actually bricked his phone, I trully thought it was damn near impossible. amazing
It is never impossible to brick a device. This is why one should know what they are doing before they do it. I mean really, he doesn't even know what rom he flashed? Flashing a device is not for everyone nor should everyone do it. If you don't understand what your doing then don't do it.
Sent for a corner cell in Arkham
is that so??
zelendel said:
It is never impossible to brick a device.
Click to expand...
Click to collapse
Tell that to AdamOutler lol
zelendel said:
It is never impossible to brick a device. This is why one should know what they are doing before they do it. I mean really, he doesn't even know what rom he flashed? Flashing a device is not for everyone nor should everyone do it. If you don't understand what your doing then don't do it.
Sent for a corner cell in Arkham
Click to expand...
Click to collapse
Ya well If I would have not rooted his phone for him, he would have never have known about xda. He's 13. live and learn.
kendmclean said:
Ya well If I would have not rooted his phone for him, he would have never have known about xda. He's 13. live and learn.
Click to expand...
Click to collapse
Well, the best thing to do would be to go to the sprint section and look at mskip's sticky with his toolkit, and load the qualcomm drivers. it's an ugly situation, but that's your best lead.
teh roxxorz said:
Well, the best thing to do would be to go to the sprint section and look at mskip's sticky with his toolkit, and load the qualcomm drivers. it's an ugly situation, but that's your best lead.
Click to expand...
Click to collapse
Ya I did that about 4 hours ago, in my devices and printers, in now says QHSUSB_DLOAD is working properly. Yet I cant get it to connect to the toolkit, to odin, I cant even find the phone with cmd. it makes a noise everytime you plug it in to the comp, well the comp does and it searches for drivers and installs them, they all installed correctly the first time aside from the one above that was fixed. Thanks though for the help, I really appreciate it.
If no other solutions work, a JTAG repair WILL unbrick your device. MobileTech Videos (www.mobiletechvideos.com) offers JTAG repair for the SGS3. I've used them to purchase a download mode jig and they have fast turn around times, great customer service, and excellent service. You really can't go wrong using them. Hope it all works out and you can get your device unbricked.
Let us know how you hard bricked it so we can do that when we need to get our phone warranty replaced without customer service seeing the custom flashed counter!
aeakin said:
If no other solutions work, a JTAG repair WILL unbrick your device. MobileTech Videos (www.mobiletechvideos.com) offers JTAG repair for the SGS3. I've used them to purchase a download mode jig and they have fast turn around times, great customer service, and excellent service. You really can't go wrong using them. Hope it all works out and you can get your device unbricked.
Click to expand...
Click to collapse
Ya i gave the broski that website this morning.thanks for the info appreciate everyone whos taken the time to throw in some ideas.
CrimsinX said:
Let us know how you hard bricked it so we can do that when we need to get our phone warranty replaced without customer service seeing the custom flashed counter!
Click to expand...
Click to collapse
Either this is your weak attempt at humour or you never read the entire thread, like I said in on the first page, He flashed a international rom. I dont need to recap the entire 2 pages, the fact that you posted that comment, like why would anyone want to brick their phone for warrenty if its working fine. just stupid. I appreciate your meaningless contribution to a site where some people try to learn a thing or 2. I would suggest you try taking the site more seriously. And if you cant, have some respect for the people that do. thanks again. take care
Right, i got a Sll, and that Sll is second hand, it gave me a lot of problems when i bought it till now, anyway, the problem:
The problem is that my fone stays awake for 30 seconds and then it just blocks itself, as in, the touch screen just collapses, you can see whats on the screen, you just can't move it...i put EVERY ROM EXISTING, i even put Jelly Bean in to it, i took it to '' The Phone House '' and saw if it was the battery, nope.
All that relates to it is that the camara burns up really quickly ( don't know if it's got something to do with the problem ) but they told me thats where the micro chip is, i can't youse my fone cos of this, help me please.
sounds like a kernel issue; how many/which one of those have you tried?
Actualy...
gastonw said:
sounds like a kernel issue; how many/which one of those have you tried?
Click to expand...
Click to collapse
I have no idea bro, i never bothered the whole ' Kernel ' thing, but im guessing i'v used the Kernels the forums gave me to root, unroot, unbrick and change Android version.
PD: Could we talk by MP?
as you wish, still there's plenty kernel stuff to go around.
in the end it's just a matter of trying what kernell works better for you and your device.
from sii xda-ded
OP I've deleted your duplicate thread.
Please do not create duplicates even if you are desperate, its to help you as much as everyone else because in the duplicate you may get different/conflicting advice on the issue which will just confuse you.
Hope you understand,
Jonny
I am a long time fan of this forum and have rooted many phones. I had a # symbol on my notification bar wanting me to update my superuser. I have some vision problems due to a stroke 3 months ago and hit the wrong thing and hit the update recovery and I got the Yellow triangle saying the Verizon detected unauthorized software. I know some of you are going to tell me to search for it, and I have done that the best I can. Like I said I had a stroke and it has affected some of my vision and makes my thinking a little cloudy at times. I hope someone can tell me there is a fix for this and would be so kind as too point me in the simplest way in getting my phone restored. I am not helpless, I could just use some help from the community here if there is a fix. Thank you for your help and understanding
i never had this issue but i do know this is the guide on how to fix it. good luck
http://forum.xda-developers.com/showthread.php?t=2024207
Sent from my SCH-I605 using xda premium 2 beta