Related
So guys ive experimented a bit and found out how to compile a kernel from source. Some guys here are waiting for permissive kernel to install linux deploys etc. Here it is. Not perfect yet, but seems to work. Has nothing special features. Uses my ramdisk from my xKat Rom with init.d support. So please dont ask for more features!! Its mostly pure stock. When i try to build a custom kernel, i will make a new thread for it.
Download
Stock_KK_Permissive_Kernel_NG1-p605
Stock_KK_Permissive_Kernel_NJ1-p605
Stock_KK_Permissive_Kernel_OB1-p605
How to install
Download the file and place the Zip on your intern or extern memory.
boot into Recovery
go on install into TWRP
look for where you placed the Zip
click on the zip an slide to the right
after that go to reboot
How to set permissive?
Permissive is not activ on boot. So use the App "Terminal Emulator"
open it
type su
type setenforce 0
to check it type
getenforce
and you will see its permissive now. But only for this session. If you rebot your device it will enforcing again.
Better choice is the App "SElinux Mode Changer".
Install it from Play Store
and set on permissive
It works with any boot now.:good:
Troubleshooting
if you have trouble with WLAN, delete your connection onetime
reconnect to your accesspoint and WLAN will work again.
Picture
View attachment 2886592
Please hit "thanks" and rate this thread if you like my work or buy me a beer
Good, thanks a lot. Did you face problem like me - when compiled zImage, updated boot.img using abootimg -u -k ../../arch/arm/boot/zImage ...
I was flashed it and get into download mode. Tablet sayed - cannot boot os or something similar. Sorry for bad english.
Great job. Works fine. Thx
@Tautvaldas
Didnt tried it yet. Ive made it on windows cause my ramdisk of the NG1 kernel was there.
i made mine too, i did all the stuff like uv and zzmove gov added in,, but got problem during flash, sad
will test your thanks
Can someone build kernel with framebuffer console support - http://blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:fbcon
@hanspampel
A noob question - but it's better to be sure before start doing something
Moreover - you are the only who made a custom kernel for this device :highfive:
So: is it true I should only replace boot.img with original one (from original tar.md5 package) and change "misc" file with "ro.securestorage.support=true" to obtain zip recovery for flashing original kernel back?
Hi
Yepp it should work this way.
So added to this kernel the latest NJ1 ramdisk. Download in OP.
hanspampel said:
So added to this kernel the latest NJ1 ramdisk. Download in OP.
Click to expand...
Click to collapse
Isn't NK1 the latest one? Or no difference as for kernel part?
Yepp your right. NK1 is the latest, but my rom uses the dbt where is NJ1 the latest. But the NG1 works on NJ1 FW too. So i think there is no real modification on samsung side. Beside there is no another update from sources for p605 available. So that means, is there a modification from samsungs side, then only in ramdisk. This is why i changed it to NJ1 one. Maybe there is one who knows.
hanspampel said:
Yepp your right. NK1 is the latest, but my rom uses the dbt where is NJ1 the latest. But the NG1 works on NJ1 FW too. So i think there is no real modification on samsung side. Beside there is no another update from sources for p605 available. So that means, is there a modification from samsungs side, then only in ramdisk. This is why i changed it to NJ1 one. Maybe there is one who knows.
Click to expand...
Click to collapse
OK, and what about latest P605XXUDOB1?
Hi, sorry for late reply. So there is no newer update of kernel sources available. Only changing of ramdisk of newer fws is possible. But nobody knows if there are changes between the fws.
So added to this kernel the latest OB1 ramdisk. Download in OP.
hanspampel said:
So added to this kernel the latest OB1 ramdisk. Download in OP.
Click to expand...
Click to collapse
Thank you very much for not forgetting this project!
Just installed it - works well!
Hi hanspampel....can you help me,to make usb otg and charge make possible on the p605. I have the lavalink adapter tl-002,but wont work. Must be a kernel thing......would be phantastic.....
Gesendet von meinem SM-N9005 mit Tapatalk
hanspampel,
are you going to continue your work for 5.1.1?
Official sources for the kernel are already published here.
Yes i know. But atm i have not a building system runnig. So maybe if i found some time to setup all the stuff, we can get a new kernel. maybe. Not now, not tomorrow.
I have been working on grouper recently and I felt that there was a certain lack of a stock based kernel with only useful stuff and not custom features. There might be some users like me who haven't been able to customize their tablets much because of schedule and lego kernel hasn't been updated much recently. So I have made a kernel for Lollipop with only required stuff.
Some points to note(they can't be called features)-
Compiled using latest Linraro 4.9 optimized for Cortex A9
Kexec support
All-F2FS support
GPU overclock(franco's method)
Optimized ARM RWSEM algorithm
Entropy tweaks
Agnostic kernel flasher
SuperSU compatible
Download- http://forum.xda-developers.com/devdb/project/?id=6701#downloads for boot.img
and http://d-h.st/2bYP for agnostic kernel flasher zip
Note- boot.img is only for All-F2FS partition users while zip can be used for all partition types(ext4, data-F2FS, all-F2FS).
XDA:DevDB Information
Phantom Kernel, Kernel for the Nexus 7
Contributors
Shivam Kuchhal
Source Code: https://github.com/shivamk11/android_kernel_asus_grouper
Kernel Special Features:
Version Information
Status: Stable
Created 2014-11-17
Last Updated 2015-05-03
Reserved
Reserved
nice!...will check it out and report back....
d
**wow, just installed latest Lollipop image (LRX21P) after converting to ALL-F2FS and it boots just fine!...
Im impressed with Lollipop setup!
Awesome, I'm gonna give this a try!
For GPU overclock is it set higher already or do I need an external app or additional files to affect it?
Sweet, now all i need is some advanced power button options and my tablet is set :3
dareino said:
nice!...will check it out and report back....
d
**wow, just installed latest Lollipop image (LRX21P) after converting to ALL-F2FS and it boots just fine!...
Im impressed with Lollipop setup!
Click to expand...
Click to collapse
What steps did you follow? I tried the same and got stuck at boot.
Which root way did you follow? Chainfire or permissive?
I am running rooted factory image on ext4. I flashed the zip, got positive feedback of the boot.img installing, rebooted, saw one app optimizing on boot. But when I go to settings.device the kernel still reports the stock name and in trickster I see the same with no evidence of any new gpu customizability. Thanks.
javivalle said:
What steps did you follow? I tried the same and got stuck at boot.
Click to expand...
Click to collapse
I didnt do anything differently when I convert a ROM to ALL-F2FS..I know it takes a good 5 mins once it hits the swirling balls....
I dont have root tho....
d
**just updated SuperSU and im rooted...**
dareino said:
I didnt do anything differently when I convert a ROM to ALL-F2FS..I know it takes a good 5 mins once it hits the swirling balls....
I dont have root tho....
d
**just updated SuperSU and im rooted...**
Click to expand...
Click to collapse
any guides available... ive tried some of the stuff but did not convert....
MattSkeet said:
any guides available... ive tried some of the stuff but did not convert....
Click to expand...
Click to collapse
PM me and ill send u my copy
dareino said:
PM me and ill send u my copy
Click to expand...
Click to collapse
PM sent thanks
I am also wondering, how did you convert a Lollipop ROM to All-F2FS? With the 'Convert To F2FS' App from the Play Store? Does it work with 5.0?
Or is all i need flashing a Lollipop ROM on my F2FS device and then this kernel and it will boot?
also can i use this kernel on tilapia? I know i can't use grouper ROMs but never bothered with Kernels until now.
punshkin said:
I am also wondering, how did you convert a Lollipop ROM to All-F2FS? With the 'Convert To F2FS' App from the Play Store? Does it work with 5.0?
Or is all i need flashing a Lollipop ROM on my F2FS device and then this kernel and it will boot?
also can i use this kernel on tilapia? I know i can't use grouper ROMs but never bothered with Kernels until now.
Click to expand...
Click to collapse
Actually if you flash a grouper version of twrp you can use grouper ROMs on a tilapia. You just lose 3g.
Sent from my Nexus 7 (build by kayioulis.com) using XDA Free mobile app
this was the best kernel for falcon, i can't wait to try it for the nexus 7 :good:
GtrCraft said:
Which root way did you follow? Chainfire or permissive?
Click to expand...
Click to collapse
Chainfire
buffal0b1ll said:
I am running rooted factory image on ext4. I flashed the zip, got positive feedback of the boot.img installing, rebooted, saw one app optimizing on boot. But when I go to settings.device the kernel still reports the stock name and in trickster I see the same with no evidence of any new gpu customizability. Thanks.
Click to expand...
Click to collapse
That's weird, might be some issue in agnostic flasher. Anybody else can confirm?
punshkin said:
I am also wondering, how did you convert a Lollipop ROM to All-F2FS? With the 'Convert To F2FS' App from the Play Store? Does it work with 5.0?
Or is all i need flashing a Lollipop ROM on my F2FS device and then this kernel and it will boot?
also can i use this kernel on tilapia? I know i can't use grouper ROMs but never bothered with Kernels until now.
Click to expand...
Click to collapse
There's an All-F2FS zip available in android dev.
dustcollector69 said:
this was the best kernel for falcon, i can't wait to try it for the nexus 7 :good:
Click to expand...
Click to collapse
Thanks!
I'll try this.
Anything, ANYTHING is better than the stock kernel on the OG N7.
Shivam Kuchhal said:
There's an All-F2FS zip available in android dev.
Click to expand...
Click to collapse
Care to share that zip and the steps you took to achieve f2fs?
I have made a kernel for stock Cyanogen OS12 with the touchscreen firmware fix and the hardboot patch (So you can use the stock rom as primary rom in multirom)
I have attached 2 file types.
The .img files to flash it with fastboot or an kernel flasher app.
The .zip files to flash it with a custom recovery
Here is a Video from savadam How to install the kernel in the recovery.
In the youtube video description you will also find howto unlock the bootloader and install a custom recovery
Update:
Kernel V2 is attached with a modified Ramdisk to fix the not working Settings-display
Update2:
The touchsreen fix is causing an 30mA higher battery drain if double tap to wake is enabled. I can life with it, but if for you the drain is to high you should disable double tap to wake in settings-display.
As soon as a new fix is finish I will provide a new kernel
Update3:
Kernel V3 with the new fix which seems to fix the touchscreen problems without causing an higher battery drain http://review.cyanogenmod.org/#/c/99607/
Update4:
Kernel V4 with fixed Sunlight Enhancement
Update5:
Kernel for CM11s XNPH05Q added
Update6:
Kernel for CM11 M11 Snapshot/Nightly added
Sources: https://github.com/bauner/android_kernel_oneplus_msm8974
Anyone tried this and can confirm it is working?
Sent from my A0001 using XDA Free mobile app
nitramcek said:
Anyone tried this and can confirm it is working?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I would not post it here if it would not work...
I use this kernel since a few weeks on the stock cos12 and since friday with the touchscreen fix.
Hardboot/Multirom support is also tested and working
Kernel V2 is attached in the first post with a modified Ramdisk to fix the not working Settings-display
@bauner it works great, I thought I had no issues, now I can touch even lighter
dev_freak said:
@bauner it works great, I thought I had no issues, now I can touch even lighter
Click to expand...
Click to collapse
Since end of december
bauner said:
Since end of december
Click to expand...
Click to collapse
Nice, I love this phone and I had touch issues, which I didn't knew, now I can touch my screen very light.
confirmed that its working perfectly and my phone is flying
does it work on stock cm12s
chiujiewei said:
does it work on stock cm12s
Click to expand...
Click to collapse
It is made for the stock cyanogen os 12
i already have cm12s as my primary rom and miui6 as my scondary rom in multirom.
will flashing the boot zip for my cm12s conflict multirom?
What about the battery life? Any experience? I flashed FC which fixed the touchscreen issue, but worsened the battery life.
ovanitas said:
What about the battery life? Any experience? I flashed FC which fixed the touchscreen issue, but worsened the battery life.
Click to expand...
Click to collapse
Kernel is stock m8 as described in the topic its been compiled from latest cm stock sources so its the same as stock cm12s.
chiujiewei said:
i already have cm12s as my primary rom and miui6 as my scondary rom in multirom.
will flashing the boot zip for my cm12s conflict multirom?
Click to expand...
Click to collapse
No it will not conflict. just boot into recovery and go to install-choose the kernel and make sure that Inject MultiRom after installation is checked
bauner said:
No it will not conflict. just boot into recovery and go to install-choose the kernel and make sure that Inject MultiRom after installation is checked
Click to expand...
Click to collapse
is kernel same version as 12s?
tsimitsangaz said:
is kernel same version as 12s?
Click to expand...
Click to collapse
It is built from the latest cm12.0 sources with the stock cos12.0 YNG1TAS17L ramdisk
bauner said:
It is built from the latest cm12.0 sources with the stock cos12.0 YNG1TAS17L ramdisk
Click to expand...
Click to collapse
is it possible to compile the same kernel with the touchscreen driver and without MultiRom support?
tsimitsangaz said:
is it possible to compile the same kernel with the touchscreen driver and without MultiRom support?
Click to expand...
Click to collapse
It would be possible but it will not make any differences, because the hardboot patch does nothing if you don't have multirom installed
Video based on this Thread
For those who are interested, here some videos regarding this beautiful rom,
Thank me if i helped you.
Lmao I feel bad for bauner. So many posts asking the same thing pretty much. [emoji12] [emoji32]
Sent from my A0001 using Tapatalk
Just for fun, I compiled an optimized version of stock kernel for Marshmallow 6.0
It works with stock ROM for Moto X Pure XT1575, not tested with anything else.
Current features:
Compiled with O3
Uber toolchain
misc gcc optimization flags
KCAL
TCP congestions
Source code:
https://github.com/vadimtk/moto-x-kernel-6.0
Based on source
https://github.com/MotorolaMobilityLLC/kernel-msm/tree/MMI-MPH24.49-18
Download link
V5:
Changes:
Updated to Kernel 3.10.94, thanks to https://github.com/Nimrodsv
XT1575:
https://www.androidfilehost.com/?fid=24345424848487596
XT1572:
https://www.androidfilehost.com/?fid=24345424848487595
V3:
Changes:
Couple SSD/flash related optimizations
XT1575:
https://www.androidfilehost.com/?fid=24343351889232014
XT1572:
https://www.androidfilehost.com/?fid=24343351889232056
V2:
https://www.androidfilehost.com/?fid=24341993505161414
How to use:
1. Download and unpack
2. Reboot to bootloader:
Code:
adb reboot bootloader
3. Boot temporary with new kernel (active till next reboot):
Code:
fastboot boot v4tk-opt-V2.img
or flash permanently:
Code:
fastboot flash boot v4tk-opt-V2.img
XDA:DevDB Information
V4TK Kernel, Kernel for the Moto X Style (Pure)
Contributors
VadimTk
Kernel Special Features:
Version Information
Status: Beta
Created 2015-12-24
Last Updated 2015-12-23
Damn that was fast okay I'm installing it now. I'll be the test dummy for TruPureX users. Thanks for your hardwork its very appreciated
also OT. woot 123 posts
---------- Post added at 02:09 AM ---------- Previous post was at 02:02 AM ----------
Works great on TruPureX it's just very bare bones at the moment. Still great job! I can not wait to see more from you tanks again for being awesome
Thank you for this!
sweet! vadim is back will flash later
patt2k said:
sweet! vadim is back will flash later
Click to expand...
Click to collapse
If your running TruPureX your going to be happy by the speed up
I tried flashing this in TWRP and get a failed message. md5 checks out. Any suggestions?
btafoya said:
I tried flashing this in TWRP and get a failed message. md5 checks out. Any suggestions?
Click to expand...
Click to collapse
Its not a flashable zip. You need to extract it before flashing. Flash as an image file in TWRP and select boot
^^^ yes, and/or try using flashify or rashr after unzipping
I have the traditional root using rooted boot and super SU in system. Is this boot.img pre rooted?
countryfolk07 said:
I have the traditional root using rooted boot and super SU in system. Is this boot.img pre rooted?
Click to expand...
Click to collapse
the boot.img does not control root. The only thing that would effect this for would maybe be the SR build as that hooks into the kernal. traditional dosent hook into the kernal. He is reverting to traditional soon.
WelcomeToTheSkye said:
If your running TruPureX your going to be happy by the speed up
Click to expand...
Click to collapse
I had it,using Sabissimos rom and so far so good.
Sent from my XT1575 using Tapatalk
I flashed this on a rooted, deodoxed 6.0 and dang.. My phone is so snappy now. Thank you!
WelcomeToTheSkye said:
the boot.img does not control root. The only thing that would effect this for would maybe be the SR build as that hooks into the kernal. traditional dosent hook into the kernal. He is reverting to traditional soon.
Click to expand...
Click to collapse
If the boot partition isn't flashed as rooted you will bootloop if superSU is installed. When I first took OTA I had to flash a rooted boot.img to get root without bootlooping. I can remember off hand who created the image, but this is why I ask.
VadimTk said:
Source code:
https://github.com/vadimtk/moto-x-kernel-6.0
Click to expand...
Click to collapse
Very nice Vadim
Please remove the "http://" on the url part for this link.
Might be a good idea to note that in the OP @VadimTk. Thanks!
Sent from my XT1575 using Tapatalk
Sir can i install this kernel on non rooted pure style
@VadimTk
please make an xt1572 version compatible, this version don't work on style, every app FC at start.
thanks
happy xmas
fdc77 said:
@VadimTk
please make an xt1572 version compatible, this version don't work on style, every app FC at start.
thanks
happy xmas
Click to expand...
Click to collapse
Did you wipe dalvik/cache?if it truly didn't work on the xt1572 either WiFi or RIL would be broken.
yes, wiped cache and dalvik but no luck, wifi and ril seems to be broken but i don't know for certain because phone was unusable
fdc77 said:
yes, wiped cache and dalvik but no luck, wifi and ril seems to be broken but i don't know for certain because phone was unusable
Click to expand...
Click to collapse
Ah okay then yes it is incompatible lol sorry for doubting
This is Touchwiz Nougat for SM-C9008 aka C9LTECHN for China Mobile
Rom
C9008ZMU1BQL2 Nougat: https://www.androidfilehost.com/?fid=962157660013069677
Kernel
Nougat Travis Kernel: https://www.androidfilehost.com/?fid=962157660013070127
Xposed
Xposed for Nougat: https://www.androidfilehost.com/?w=files&flid=229076
TWRP
TWRP: https://forum.xda-developers.com/c9-pro/development/twrp-c9ltechn-t3646970
Kernel Features:
Permissive
Added IO BFQ Scheduler
Disabled DM_VERITY
Disabled Forced File Encryption
Disabled KNOX
Disabled TIMA
Disabled RKP
Disabled KAP
Disabled Secure Storage
Enabled CIFS Filesystem Support
Enabled NFS Filesystem Support
Increase Battery Charging Levels
Fsync Toggle (Enable/Disable)
Kernel Patched up to 3.10.108
Mild undervolt for our cpu and gpu
Use all cores to boot
F2FS
Ramdisk Optimised
Swappiness set to 60 (6gb ram doesn't need a constant swap out to swap file.)
Lowered swap file from 2gb to 1gb
Added in core control
Fingerprint fixed fast wakeup enabled
Added more govs
CVE Patches updated as of DEC/2017
Sony,Microsoft,Logitech Gamepad support
More to come....
Kernel Source: https://github.com/travismills82/c9lte-kernel
For those of you who have donated, Thank You very much it is a tremendous help.
Awesome work buddy, supporting that many models is not an easy job
Thanks Travis for your great efforts,could you please upload related bootloader & modem.
Sent from my SM-C9000 using Tapatalk
Could you please guide me how to install these files?
What are the steps?
I have SM-C9008
amincom said:
Thanks Travis for your great efforts,could you please upload related bootloader & modem.
Sent from my SM-C9000 using Tapatalk
Click to expand...
Click to collapse
I have downloded related stock rom and extracted bootloader & modem files and flashed them but after your c9008 rom installed,it stucked at booting screen with c9pro logo,so reinstalled your c9000 rom back.
Sent from my SM-C9000 using Tapatalk
amincom said:
I have downloded related stock rom and extracted bootloader & modem files and flashed them but after your c9008 rom installed,it stucked at booting screen with c9pro logo,so reinstalled your c9000 rom back.
Sent from my SM-C9000 using Tapatalk
Click to expand...
Click to collapse
Its a strait stock rom it should not have issues. Does it boot after you flash travis-kernel and root?
travis82 said:
Its a strait stock rom it should not have issues. Does it boot after you flash travis-kernel and root?
Click to expand...
Click to collapse
It rooted but with stock kernel.
Sent from my SM-C9000 using Tapatalk
Hello travis82,
After immense searching the web, I find you are the only person who can help with TWRP for SM-C9008.
I have installed the latest Android version 7.1.1 on my C9 Pro SM-C9008 and its all Chinese and it does not have google apps. Moreover it does not even have the Apps icon with which normally one would go inside and see all the various apps icons.
Please help.
Best Regards.
Did anyone know the procedure for installation? Should I use Oddin?
vivzbravo said:
Hello travis82,
After immense searching the web, I find you are the only person who can help with TWRP for SM-C9008.
I have installed the latest Android version 7.1.1 on my C9 Pro SM-C9008 and its all Chinese and it does not have google apps. Moreover it does not even have the Apps icon with which normally one would go inside and see all the various apps icons.
Please help.
Best Regards.
Click to expand...
Click to collapse
Chinese firmware does not contain google apps it is blocked in china, second what you are describing is touchwiz new ui. You can adjust its ui settings in launcher settings. So your complaints are not complaints but is how the chinese firmware and new touchwiz work honestly.
travis82 said:
Chinese firmware does not contain google apps it is blocked in china, second what you are describing is touchwiz new ui. You can adjust its ui settings in launcher settings. So your complaints are not complaints but is how the chinese firmware and new touchwiz work honestly.
Click to expand...
Click to collapse
Many thanks Travis82 for your reply.
Could you please give an approximate time when TWRP will be released to support SM-C9008, so that I can try and install the files your have posted here for Kernel and Gapps
you can use the same c9000 twrp for your model they are the same phone just c9008 has 128gb vs 64gb
travis82 said:
you can use the same c9000 twrp for your model they are the same phone just c9008 has 128gb vs 64gb
Click to expand...
Click to collapse
Thanks
My SM-C9008 is 64GB version only.. I will try the TWRP for C9000 as you have suggested and give feedback
vivzbravo said:
Hello travis82,
After immense searching the web, I find you are the only person who can help with TWRP for SM-C9008.
I have installed the latest Android version 7.1.1 on my C9 Pro SM-C9008 and its all Chinese and it does not have google apps. Moreover it does not even have the Apps icon with which normally one would go inside and see all the various apps icons.
Please help.
Best Regards.
Click to expand...
Click to collapse
Hi buddy, try out this zip here, its pulled from TGY ROM
AL_IRAQI said:
Hi buddy, try out this zip here, its pulled from TGY ROM
Click to expand...
Click to collapse
Many thanks Bro.
I finally managed to get it all together with the help of you all.
Special thanks to Travis82, amincom, AL_IRAQI.
Now on my C9008 Model I have installed Nogaut Stock that was for C900F, and its working
C9008 Recovery Install
vivzbravo said:
Many thanks Bro.
I finally managed to get it all together with the help of you all.
Special thanks to Travis82, amincom, AL_IRAQI.
Now on my C9008 Model I have installed Nogaut Stock that was for C900F, and its working
Click to expand...
Click to collapse
Dear Friend,
I have c9008 becasue of OTA my Playstore was uninstalled.
Now i am Android 7.
But i want to install this rom. Please help me how i can install this rom.
How did you installed Nogaut Stock. Please help me.
---------- Post added at 01:10 PM ---------- Previous post was at 01:06 PM ----------
Dear Friend,
I have c9008 becasue of OTA my Playstore was uninstalled.
Now i am Android 7.
But i want to install this rom. Please help me how i can install this rom.
How did you installed Nogaut Stock with playstore. Please help me.
Can I flash only kernel ?
My c9000 rooted with msgisk
I only want to change selinux to permissive
zahidzarif said:
Dear Friend,
I have c9008 becasue of OTA my Playstore was uninstalled.
Now i am Android 7.
But i want to install this rom. Please help me how i can install this rom.
How did you installed Nogaut Stock. Please help me.
---------- Post added at 01:10 PM ---------- Previous post was at 01:06 PM ----------
Dear Friend,
I have c9008 becasue of OTA my Playstore was uninstalled.
Now i am Android 7.
But i want to install this rom. Please help me how i can install this rom.
How did you installed Nogaut Stock with playstore. Please help me.
Click to expand...
Click to collapse
Prior to the below steps I had C9008ZMU1BQL2 installed on my C9008, but since it was Chinese version without any google apps, I followed the below steps.
1. Copied the Kernel zip file by Travis82 on SDCARD
2. Installed twrp-3.2.1-0-c9lte.img.tar using Odin3 v3.12.7 on my C9008 and restarted my phone to check if it loads back to Android successfully.
3. Using Recovery mode, installed KERNEL zip file from SDCARD, after this when I rebooted it did not load Android and would keep rebooting again and again.
4. Restarted in Download mode and using Odin3 v3.12.7 installed Nogaut STOCK file downloaded from SAMMOBILE for C900F (C900FDDU1BQL3)
And it rebooted automatically after installation.
All the best!
C900FDDU1BQL7 already released,we hope to have it as custom rom.
Sent from my SM-C9000 using Tapatalk