Hi, I'm running RLS15 through TWRP and was wondering what ROM I could use to flash to KitKat. Baseband is I545VRUAMDK. HELP!
joe_jang said:
Hi, I'm running RLS15 through TWRP and was wondering what ROM I could use to flash to KitKat. Baseband is I545VRUAMDK. HELP!
Click to expand...
Click to collapse
anyone? can i just flash anything with the label MDK?
joe_jang said:
anyone? can i just flash anything with the label MDK?
Click to expand...
Click to collapse
Odin the full wipe mdk tar
joe_jang said:
Hi, I'm running RLS15 through TWRP and was wondering what ROM I could use to flash to KitKat. Baseband is I545VRUAMDK. HELP!
Click to expand...
Click to collapse
You just trying To flash a TW 4.4 ROM? If that's the case there's q couple 4.4 ones in our Android Development section.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
You just trying To flash a TW 4.4 ROM? If that's the case there's q couple 4.4 ones in our Android Development section.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
pretty much, would like stock android 4.4.2 if possible. hyperdrive RLS15 has been crashing on me almost daily and want something else. would the flash be as easy as flashing hyperdrive? any suggestions on ROMs?
joe_jang said:
pretty much, would like stock android 4.4.2 if possible. hyperdrive RLS15 has been crashing on me almost daily and want something else. would the flash be as easy as flashing hyperdrive? any suggestions on ROMs?
Click to expand...
Click to collapse
Well I personally don't usually run TW but I think quite a few people have liked this one http://forum.xda-developers.com/showthread.php?t=2721118
Also you could grab the International TW patch and then grab pretty much any international TW ROM from the i9505 forum. There's a ton of those.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 01:51 PM ---------- Previous post was at 01:48 PM ----------
Here's another one to look into
http://forum.xda-developers.com/showthread.php?t=2702592
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Well I personally don't usually run TW but I think quite a few people have liked this one http://forum.xda-developers.com/showthread.php?t=2721118
Also you could grab the International TW patch and then grab pretty much any international TW ROM from the i9505 forum. There's a ton of those.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 01:51 PM ---------- Previous post was at 01:48 PM ----------
Here's another one to look into
http://forum.xda-developers.com/showthread.php?t=2702592
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
thank you very much!
Related
Hi everyone.
I have rooted my SGS3 I9300 running Android 4.0.4 version I9300XXLH1 using CMW Recovery 6.0.1.2.
Now I want to flash the phone with JB. Which download should I choose, and is there anything I should think of before I start messing around?
Norwegian users who have done this, please share your experiences!
Thanks
Use the UK version...
Sent from my GT-I9300 using xda premium
---------- Post added at 03:26 PM ---------- Previous post was at 03:25 PM ----------
Norwegian was updated yesterday
Sent from my GT-I9300 using xda premium
Okay! Thanks
Sent from my GT-I9300 using xda premium
Caladan59 said:
Hi everyone.
I have rooted my SGS3 I9300 running Android 4.0.4 version I9300XXLH1 using CMW Recovery 6.0.1.2.
Now I want to flash the phone with JB. Which download should I choose, and is there anything I should think of before I start messing around?
Norwegian users who have done this, please share your experiences!
Thanks
Click to expand...
Click to collapse
I flashed the latest WanamLite rom. It's DLJ4 and very close to stock if that's what you want.
Sent from my GT-I9300 using Tapatalk 2
zaphyr said:
I flashed the latest WanamLite rom. It's DLJ4 and very close to stock if that's what you want.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Can you please give me links to exactly what I need, I think there is too many versions and too many ways to do this.
I do not know if that rom will work with my CWM boot loader. Sorry for being a total noob.
First post...stock rom
Sent from my GT-I9300 using xda premium
Caladan59 said:
Can you please give me links to exactly what I need, I think there is too many versions and too many ways to do this.
I do not know if that rom will work with my CWM boot loader. Sorry for being a total noob.
Click to expand...
Click to collapse
This:
http://forum.xda-developers.com/showthread.php?t=1704185
Sent from my GT-I9300 using Tapatalk 2
hi im just wondering what firm ware i needed to update to jellybean from open europe oxa gingerbread, do i need to update to ics first or can i use a stock firmware?
please move my post if i've put it in the wrong place!
The post is in the right place. Do you want a sammy stock rom or a cyanogen mod?
Sent from my GT-I9100 using xda app-developers app
---------- Post added at 09:36 AM ---------- Previous post was at 09:32 AM ----------
Sammy android 4.1.2 & Cyanogen Mod 4.3-CM 10.2, 4.2.2-CM 10.1, 4.1.2-CM 10
Sent from my GT-I9100 using xda app-developers app
just stock I think?
thanks for the reply
fish_finger01 said:
just stock I think?
thanks for the reply
Click to expand...
Click to collapse
Yes and you need a proper recovery. I suggest you a dorimanx, but watch out for the right version. The 9.xx is for cm, aokp... and the 8.xx is for stock sammy so download the right one.
Sent from my GT-I9100 using xda app-developers app
kona144 said:
Yes and you need a proper recovery. I suggest you a dorimanx, but watch out for the right version. The 9.xx is for cm, aokp... and the 8.xx is for stock sammy so download the right one.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
ok you lost me! what is dorimanx?
all i want is to know what stock flash i need and if possible where to dl from
thanks
fish_finger01 said:
ok you lost me! what is dorimanx?
all i want is to know what stock flash i need and if possible where to dl from
thanks
Click to expand...
Click to collapse
Dorimanx is an XDA dev who works on a i9100 kernel, named after himself. I absolutely love this kernel. It's stable, highly customisable and often updated. Search XDA for it and you shall find.
So you want stock, as evidenced below:
fish_finger01 said:
just stock I think?
thanks for the reply
Click to expand...
Click to collapse
.. but then it goes pear shaped.
kona144 said:
Yes and you need a proper recovery. I suggest you a dorimanx, but watch out for the right version. The 9.xx is for cm, aokp... and the 8.xx is for stock sammy so download the right one.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
That's where it went wrong.
fish_finger01 said:
ok you lost me! what is dorimanx?
all i want is to know what stock flash i need and if possible where to dl from
thanks
Click to expand...
Click to collapse
Fish finger (hahaha) all you want is to update to the latest Samsung official firmware right? If so, forget what kona said, you don't need a recovery at all. All you need to do is to flash a stock ROM via Odin, with your phone in download mode. Where to get the ROM? Search on Samfirmware.com for a stock ROM for your country, region & carrier. Then, to flash in Odin, you can click the link in my signature and find a handy link to a tutorial from there.
Hopper8 said:
Fish finger (hahaha) all you want is to update to the latest Samsung official firmware right? If so, forget what kona said...
Click to expand...
Click to collapse
I think you've just saved his/her phone from bricking and from a lot of unnecessary steps:thumbup:
I bought a used s4 which is currently on the m1l build. Ive rooted and installed safestrap but im not sure there are any compatible roms for this build. Theres a youtube video in the sub forum showing an s4 on the m1l build being flashed with the hyperdrive rom but the link in the video takes me to a different build. I dont want encounter any problems. Im coming from an s3 so im still learning the ins and outs of the s4. From what I understand I can only use touchwiz roms. So id like to know exactly what my options are.
Sent from my SCH-I545 using Tapatalk
I saw a thread below stating I can use hyperdrive, jellybean and I forgot the other. I just cant use aosp roms, is this corrrect? Im on safestrap 3.65
Sent from my SCH-I545 using Tapatalk
Maduro78 said:
I saw a thread below stating I can use hyperdrive, jellybean and I forgot the other. I just cant use aosp roms, is this corrrect? Im on safestrap 3.65
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
No asop or CM base.
safestrap enabled, Hyperdrive driven
decaturbob said:
No asop or CM base.
safestrap enabled, Hyperdrive driven
Click to expand...
Click to collapse
So it doesnt matter if it says for mdk or me7 base?
Sent from my SCH-I545 using Tapatalk
Maduro78 said:
So it doesnt matter if it says for mdk or me7 base?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Correct.. no asop or cm...those are only available for those who got mdk base phone with loki exploit.
safestrap enabled, Hyperdrive driven
decaturbob said:
Correct.. no asop or cm...those are only available for those who got mdk base phone with loki exploit.
safestrap enabled, Hyperdrive driven
Click to expand...
Click to collapse
Thank you sir downloading it right now.
Sent from my HTC6500LVW using Tapatalk
Hello, Androiders! I've been trying to get AOSP Google Edition by Danvdh as described in this thread: http://forum.xda-developers.com/showthread.php?t=2643031 installed on my Verizon Galaxy S4.
My phone specs are as follows:
Model Number: SCH-I545
Android Version: 4.3
Baseband Version: I545VRUEMK2
(please let me know if more info necessary!)
So far I have successfully rooted my phone using the saferoot method here: http://forum.xda-developers.com/showthread.php?t=2565758
Next I tried running loki_flash and recovery.lok via the Terminal Emulator on my phone, but it returned a wrong version error. Further reading suggests that loki does not work with my phone, with safestrap being the alternative. Danvdh notes that safestrap will not work with his ROM.
Does that mean that I am out of luck?
forte647 said:
Hello, Androiders! I've been trying to get AOSP Google Edition by Danvdh as described in this thread: http://forum.xda-developers.com/showthread.php?t=2643031 installed on my Verizon Galaxy S4.
My phone specs are as follows:
Model Number: SCH-I545
Android Version: 4.3
Baseband Version: I545VRUEMK2
(please let me know if more info necessary!)
So far I have successfully rooted my phone using the saferoot method here: http://forum.xda-developers.com/showthread.php?t=2565758
Next I tried running loki_flash and recovery.lok via the Terminal Emulator on my phone, but it returned a wrong version error. Further reading suggests that loki does not work with my phone, with safestrap being the alternative. Danvdh notes that safestrap will not work with his ROM.
Does that mean that I am out of luck?
Click to expand...
Click to collapse
You can't run that ROM. Your only recovery option Is SafeStrap and that only allows for Touchwiz based roms.
Sent from my SCH-I545 using Xparent Blue Tapatalk 2
---------- Post added at 10:36 PM ---------- Previous post was at 10:35 PM ----------
Here's a good link to start with
http://forum.xda-developers.com/showthread.php?t=2606501
SafeStrap link coming....
http://forum.xda-developers.com/showthread.php?t=2441441
Sent from my SCH-I545 using Xparent Blue Tapatalk 2
Mistertac said:
You can't run that ROM. Your only recovery option Is SafeStrap and that only allows for Touchwiz based roms.
Sent from my SCH-I545 using Xparent Blue Tapatalk 2
---------- Post added at 10:36 PM ---------- Previous post was at 10:35 PM ----------
Here's a good link to start with
http://forum.xda-developers.com/showthread.php?t=2606501
SafeStrap link coming....
http://forum.xda-developers.com/showthread.php?t=2441441
Sent from my SCH-I545 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Thanks for the links! Reading through now...
I was thinking to use Boeffla Kernel for G900F on G900T on my CM 13 Based ROM. Does it work properly?
agenter7 said:
I was thinking to use Boeffla Kernel for G900F on G900T on my CM 13 Based ROM. Does it work properly?
Click to expand...
Click to collapse
It works I've been using it for a few days now but I can't get my head around all them settings. It also Clash's with my closed framework so I'm lookin for something less complex
A little OT but since we're here, is installing CM 13 just a matter of downloading the software and flashing with Odin? I'm rooted on MM. Does my operating system change?
Sent from my SM-G900T using Tapatalk
---------- Post added at 02:19 AM ---------- Previous post was at 02:19 AM ----------
Appreciate any help.
Sent from my SM-G900T using Tapatalk
passport619 said:
A little OT but since we're here, is installing CM 13 just a matter of downloading the software and flashing with Odin? I'm rooted on MM. Does my operating system change?
Sent from my SM-G900T using Tapatalk
---------- Post added at 02:19 AM ---------- Previous post was at 02:19 AM ----------
Appreciate any help.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
No.
Install twrp via odin
download cm
download gapps
reboot to twrp
do a full wipe system wipe since going from tw to aosp base
flash cm
flash gapps
reboot
system is changed and profit