Related
Device information:
Xperia Z Ultra
Cyanogenmod 11 M12 (togari from offical cm side)
Smartphone is encrypted
Bootloader unlocked
Nothing else changed (kernel etc.)
Hi,
since a few hours i try to get TWRP 2.8.5.0 to work.
After installing it according the offical description and rebooting into the recovery, my z ultra only shows the Sony logo and doesn´t do anything (it took me some time to figure out how to turn it off... Power + vol up).
To get the cm cwm back, i´ve used fastboot to flash boot.img.
The integrated cwm can´t mount the encrypted data partition and is useless for me. To avoid problems on my heavily used z ultra, i tried TWRP first on my old (encrypted) Nexus 7 (2012) tablet, works like a charm and most important, it doesn´t have any problems with encrypted devices.
The installation on the Nexus 7 was not really mentionable, fastboot flash recovery file.img, that´s it.
The Z Ultra is different, the teamwin page says :
Download the above file. Copy the file to /sdcard/fotakernel.img and run the following commands using terminal emulator or in adb shell:
su
dd if=/sdcard/fotakernel.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
It won´t work, the above mentioned problem is the result.
Maybe i need a custom kernel, any suggestions?
Thanks for your help.
CM kernel probably doesnt allow to flash other kernel than it has (cwm). Flash great devs kernel and than twrp. I have it (at least multi rom 2.8.4 one) and it works.
However after screen off it reboots and i dont know what cause it
Thanks for your answear, i try it next weekend.
Code:
Rom: Resurrection Remix® Lollipop v5.3.6 - Togari
Kernel: from rom
Recovery: Dunno where it came from? Perhaps when flashing Candy5 Beta.
Im kind off in the same position, recovery says
Code:
E: Cannot load volume /misc
Finding update package...
Opening update package...
Installing update package...
Package is for device: ...[B][I]bla bla bla you get the thing[/I][/B]
E: failed to install /sideload/package.zip
E: Please take note of ..[B][I]bla bla bla[/I][/B]
Installation aborted.
E: Cannot load volume /misc!
When trying to flash any zip file. When the flash starts I see something like "verification failed" flashing by really quick .....I guess the verify is active which is causing this issue?
BUT this damn recovery has no damn setting to change that! Probably possible to modify some config.txt manually.
Is it possible to change recovery somehow from CM recovery?
I tried by flashing great devs with fastboot. Then it says finished but the same recovery is still present...
Sorry for ranting a bit ..I'm in the middle of some other projects going on with BSD but this one is driving me nuts :silly: I just want to flash TWRP on my device It should not be this difficult
My advice for you is to flash boot.img from resurrection remix - its great devs kernel v2 with twrp - or zombie kernel for 5.0 which has built in twrp.
Both can be flashed using fastboot, so u dont need working recovery for it and they both should work with all 5.0 roms except gpe one.
Im not sure what versions of recovery they have built in, but after that u can flash multirom zip, which has 2.8.4.x one (with mutirom support ofc,but its just addition for "stock" functions it has). I dont think u can use official twrp 2.8.5.0 with nonstock kernel as i tried to flash it to recovery partition and fotakernel and always it doesnt boot (recovery, rom and kernel worked fine, just after pressing vol+, vol- or power when purple light comes up, it changes to yellow and stay like this till i forced reboot).
I tried it with Great Devs KK (v1 + AICP 7.0l) and LP (v2 + RR or AICP 8.0 unofficial build), built in kernel in AICP 8.0 unofficial and Validus.
MultiROM twrp works fine with GD v1 and v2
ch3mn3y said:
My advice for you is to flash boot.img from resurrection remix - its great devs kernel v2 with twrp - or zombie kernel for 5.0 which has built in twrp.
Both can be flashed using fastboot, so u dont need working recovery for it and they both should work with all 5.0 roms except gpe one.
Im not sure what versions of recovery they have built in, but after that u can flash multirom zip, which has 2.8.4.x one (with mutirom support ofc,but its just addition for "stock" functions it has). I dont think u can use official twrp 2.8.5.0 with nonstock kernel as i tried to flash it to recovery partition and fotakernel and always it doesnt boot (recovery, rom and kernel worked fine, just after pressing vol+, vol- or power when purple light comes up, it changes to yellow and stay like this till i forced reboot).
I tried it with Great Devs KK (v1 + AICP 7.0l) and LP (v2 + RR or AICP 8.0 unofficial build), built in kernel in AICP 8.0 unofficial and Validus.
MultiROM twrp works fine with GD v1 and v2
Click to expand...
Click to collapse
....well im stuck. I have tried everything. Even hotbooting. That damn CM recovery is there no matter what!
I'm gonna give it a try tomorrow and start on zero. Either flash a stock rom with flashtool or scrubber port which is not based on cm.
I'll report later with some results
Mybe try to:
- dl your rom and zombie or gd
- open ur roms zip with ie 7zip
- delete boot.img
- unpack kernels zip and move boot.img to roms zip
- copy new zip to device
- flash stock
- flash kernel (zombie or gd)
- using built in recovery (should be twrp( flash roms zip
As there will be built in kernel with twrp it should stay after reboot.
If not do it again but before reboot in the and flash multirom zip
Sent using C6833 - AICP/GreatDevs
Solved the issue.
First I Downloaded
STOCK ROM] [FTF] Xperia Z Ultra 6833 14.4.A.0.118 "SRF FR".
GoogleDrive: Download FTF
Thanks to @dandyqb
Click to expand...
Click to collapse
And Flashtool 9.18.5
But I got stuck with Flashtool prompting me to move content from C:\flashtool\firmwares C:\users\admin\.flashtool/firmwares (??)
Abandoned flashtool and downloaded Flashtool 9.16.1 instead. But this time I hit another issue.
Code:
Flashing system bla bla bla.
Abort..
Error..
Device connected in Flashmode.
Grrrrr..!!
Abandoned the FTF file and downloaded
STOCK ROM] [FTF] Xperia Z Ultra 6833 14.4.A.0.118 "VodaFone UK".
mediafire: Download FTF
Thanks to @Feodorus 4PDA
Click to expand...
Click to collapse
This time it worked out. Flashtool read the FTF and pushed it to the device as it should.
Booted device and transfered files to my device
Code:
cm-Resurrection_Remix_LP_v5.3.6-20150221-togari.zip
gapps-lp-20141109-signed.zip
MultiROM-v30x-180115-UNOFFICIAL-togari.zip
I did the rest manually. Downloaded and opened [email protected]_LRX21P.S3.4201_by_Scrubber.
Took out the file "For_ALL_ZU_5.0_Scrubb_GPE_kernel_initD.img"
Renamed file and flashed it with
Code:
Fastboot flash boot boot.img
Booted into recovery and flashed
Code:
cm-Resurrection_Remix_LP_v5.3.6-20150221-togari.zip
gapps-lp-20141109-signed.zip
MultiROM-v30x-180115-UNOFFICIAL-togari.zip
Turned off device. Booted into Fastboot mode
Renamed "TWRP_multirom-togari_20150201-00.img" to "recovery"
Flashed file with
Code:
Fastboot flash recovery recovery.img
Fastboot reboot
Wooh.. And I reached a very unfamiliar place named Multirom upon boot saying Auto-boot! :good::laugh:
Glad u made it. It strange that u need steps with gpe port, but maybe some devices are different
Multirom lets u boot more than one rom. Its like grub on pc, so its good thing, but take 5-6 secs of additional booting time
And flash older version of flashtool (eg. 0.9.18.2), if u want to keepfirmwares in flashtool/firmwares folder. Devs change somethin and people like me with small system partition or ssd drive, which has limited space will have problems if it keeps that way (or well need to stay with older verions)
Sent using C6833 - AICP/GreatDevs
ch3mn3y said:
Glad u made it. It strange that u need steps with gpe port, but maybe some devices are different
Multirom lets u boot more than one rom. Its like grub on pc, so its good thing, but take 5-6 secs of additional booting time
And flash older version of flashtool (eg. 0.9.18.2), if u want to keepfirmwares in flashtool/firmwares folder. Devs change somethin and people like me with small system partition or ssd drive, which has limited space will have problems if it keeps that way (or well need to stay with older verions)
Sent using C6833 - AICP/GreatDevs
Click to expand...
Click to collapse
I didn't really need scrubbers kernel. I just used it to flash a recovery on to my device as I came from stock rom after flashing the FTF.
Just kind of a "safety first" step instead of jumping right onto flashing the multirom .img file and not knowing if its gonna boot or not. :silly:
Scrubbers gpe port was just the first rom that popped up in my head so its why I used it.
You can use Rashr to replace recovery in current kernel image on the go. I use it all the time to get TWRP - works perfectly. Can backup kernel image before modifying.
You can flash Philz, TWRP (any version, incl. 2.8.5.0) or any other recovery image from sdcard with it on top of AOSP kernel.
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
What kernel are u using? Im on GreatDevs and after flashing 2.8.5.0 it doesnt boot. I mean its flashed, but after reboot when i press vol+/- like i do with twrp 2.8.4 (multirom one)or before did with cwm it freezes on kernel logo (led color changes from purple to yellow)
Sent using C6833 - AICP/GreatDevs
ch3mn3y said:
What kernel are u using?
Click to expand...
Click to collapse
If this question is for me, I use official CM12.
Its in my forum and tapatalk signatures - Great Devs, KK one.
So maybe its it and cm11 kernel (or only GD) doesnt support 2.8.5+ ??
I can live with 2.8.4 for now (till I move to LP)
B.Maximenko said:
You can use Rashr to replace recovery in current kernel image on the go. I use it all the time to get TWRP - works perfectly. Can backup kernel image before modifying.
You can flash Philz, TWRP (any version, incl. 2.8.5.0) or any other recovery image from sdcard with it on top of AOSP kernel.
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Click to expand...
Click to collapse
I have tried this app. And other similar apps I could find on play store. They did not work.
The output in this app showed that it successfully replaced recovery but on reboot CM recovery was still present.
B.Maximenko said:
You can use Rashr to replace recovery in current kernel image on the go. I use it all the time to get TWRP - works perfectly. Can backup kernel image before modifying.
You can flash Philz, TWRP (any version, incl. 2.8.5.0) or any other recovery image from sdcard with it on top of AOSP kernel.
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Click to expand...
Click to collapse
the app doesn't work for me either (i'm running slimkat build 9 stock)
i can't get 2.8.5.0 working permanently (at least not after a power down)... it'll work right after a fastboot flash
lame Sony putting kernel and recovery together.... wth... my Note 2 was so much simpler to work with...
anyone got a TWRP theme which is suitable with xperia ultra z?
hello guys,i'm new here and i have a problem with my android mobile.when i turn it on it hangs on android logo
mobile spec
brondi centoruion,dual core,512 mb ram,4.2.1 android.
all solutions and suggeations would be appreciated.
no one know about this????
x2138 said:
hello guys,i'm new here and i have a problem with my android mobile.when i turn it on it hangs on android logo
mobile spec
brondi centoruion,dual core,512 mb ram,4.2.1 android.
all solutions and suggeations would be appreciated.
Click to expand...
Click to collapse
Bro, I think you are probably on bootloop.
It is the situation where the phone goes into loop immediately after booting. It continues till it emptys the battery.
Solution:
- If your rooted and have recoveries installed, then clean flashing the ROM will solve the problem.
- If you don't have recoveries, then first install it.
:download your particular ROM.
:keep that ROM into sdcard.
:flash via your recovery.
And your done!
Note: Only use ROMs that are made for your phone. Cross flashing can damage your phone badly.
If you find this helpful, there's a thumbs up button (thanks button), just click it.
1st of all thank u very much for replay.
2nd i have no recovery installed and usb debugging is off.is there any way to install recovery on it with present situation??
x2138 said:
1st of all thank u very much for replay.
2nd i have no recovery installed and usb debugging is off.is there any way to install recovery on it with present situation??
Click to expand...
Click to collapse
Yes, there's a alternative
First of all you need to unlock your bootloader for that.
(You can google it for your phone)
Next
-Download flashtool for your win/lin
-Download your custom stable ROM.
-Extract ROM (zip)
-Flash recovery.img
-Flash boot.img
-Reboot
-and bingo! Your done.
For exact detail follow below link or you can just google it.
http://forum.xda-developers.com/showthread.php?t=2131284
If you found this helpful, there's a thumbs up button (thanks button), just press it
Happy Flashing
[BOOT ANIMATION][BLACK OPS 2][REDMI NOTE 3 ( all variants) ]
ROOT IS REQUIRED
How to change boot animation
1. download the zip from the link and place it in sdcard.
2.Now install root browser from this link- https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree&hl=en
3.Now in root browser go to home and go to system/media/bootanimation.zip , This is your present boot animation.(make a backup of this anywhere else.)Now replace the bootanimation.zip with the one I have uploaded .
4. Now long press on the same boot animation.zip and select permissions and check all options except the ones which are under special permissions. Check uploaded images.
5. Now try rebooting. You must get your new bootanimation. If not you are always free to ask me.
YOU HAVE A NEW BOOT ANIMATION NOW!!!!!!
NOTE: Incase you want your old boot animation just replace the bootanimation.zip with your back up.:good:
CREDITS:
@ak980
@Dr. Joy Das For the Video .....
@Zte blade l
Lol Me
STATUS- Stable unless you mess with the permissions.
DOWNLOADS- LINK FOR BOOTANIMATION.ZIP
https://drive.google.com/open?id=0BycDtAIEph_EQjcxRzJhcm05bW8 -
Incase the link is not working mention or quote me in this thread. :laugh:
CHECK THE UPLOADS FOR IMAGES ...sorry for bad clarity....the boot animation is clear unlike this.
Thanks,
Zte blade l
HIT THANKS IF YOU LIKE MY POST!!!!
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
The size of the boot animation is more because of the resolution of the device.
Give me feedbacks
how to increase boot animation time it will stuck in half and the phone starts
Nice Boot animation!
If you happen to be using Android N theme which has it's own boot animation. (or any other theme that has it).
You will need to change to the default animation to see this one.
Click Themes
Account Icon (top left)
Customize Theme
Boot Animation
Default
Apply
corkiejp said:
If you happen to be using Android N theme which has it's own boot animation. (or any other theme that has it).
You will need to change to the default animation to see this one.
Click Themes
Account Icon (top left)
Customize Theme
Boot Animation
Default
Apply
Click to expand...
Click to collapse
im using redmi note 3...how to i increase the boot animation time...cause it ends so fast
thanks
Kbsingh said:
im using redmi note 3...how to i increase the boot animation time...cause it ends so fast
thanks
Click to expand...
Click to collapse
I don't know how to increase the time.
But for me on the latest xiaomi.eu 6.9.9 (6.0.1), the boot animation time is now to long.
corkiejp said:
I don't know how to increase the time.
But for me on the latest xiaomi.eu 6.9.9 (6.0.1), the boot animation time is now to long.
Click to expand...
Click to collapse
the new update (6.0.1) erased my rood ...what should i do now, cause i cant find a way to
Kbsingh said:
the new update (6.0.1) erased my rood root ...what should i do now, cause i cant find a way to
Click to expand...
Click to collapse
I assume you meant root! Flash the latest SuperSU v2.78 SR1 in TWRP.
Good animition but not HD quality.
Note:
This is not bootanimation, this is the splash screen (the 'Mi' boot logo which is displayed when device is switched ON)
This is for Xiaomi Mi 5(, 5s, 5s Plus) & Mi Max/Mix Only (Snapdragon Variants)..
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Xiaomi Mi 5 or Mi 5s / 5s Plus or Mi Max or Mi Mix (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
Seems this tool won't work anymore for the latest updated firmware.
STEPS to create splash.img:
Before proceeding, make sure fastboot is setup properly in your computer (just incase something goes wrong)..
1. Download & Extract this: Splash_Logo_Maker.zip
2. Make sure you have a picture with resolution equal to your device resolution (for example, 1080x1920px for Mi5) or lesser.
Note:
In fact, you don't need 1080x1920 picture, you can even have a picture with any resolution lower than device resolution, which will automatically be centered while booting.
For example, here's the stock splash with resolution 161x321: Click Here
3. Now rename your picture as logo.png or logo.jpg (according to the format) & replace it inside "pics" folder of the extracted folder.
(Or you can also directly edit the picture inside)
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img , which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Optional: To backup your original splash.img:
Code:
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash.img
(Not necessary though.. You may get it from the stock firmware itself.)
Now, Choose any one easy method to install:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Note:
For Mi 5 upgraded to Android 7 (Nougat) firmware, if this tool doesn't work, try this tool here by @Cynob:
Mi 5 (Nougat) Logo Maker
Credits:
1. @GokulNC (myself ) who wrote this script
2. Based on logo_gen.py script
Hit the Thanks :good: button if it worked for you
You're welcome to share here the custom splash screens that you made, since others may find it useful
Thanks, was looking for this, trying to figure it out from the similar instructions from Redmi.
Thank you for this beatiful script!
I've made a custom splash screen which looks in my opinion really nice, so I would like to share it. You can find it in my attachements, Thanks!
Thank you man, this is my boot splash image
Thank you so much!! :good:
This is my splash image
Can someone create a Splash Screen with the image attached? The Script does not work on my Computer
33bca said:
Can someone create a Splash Screen with the image attached? The Script does not work on my Computer
Click to expand...
Click to collapse
Wow man it looks very awesome i will create the splash screen in some hour for you if nobody help you.But Can you create an image that makes more sense with xiaomi for me? Please, if you have time obviously
Argenis_jbc said:
Wow man it looks very awesome i will create the splash screen in some hour for you if nobody help you.But Can you create an image that makes more sense with xiaomi for me? Please, if you have time obviously
Click to expand...
Click to collapse
i can do one tomorrow, if i have the time for it.
there you go!
Argenis_jbc said:
there you go!
Click to expand...
Click to collapse
Thanks mate :highfive:
In the attachements you can see another logo, i just used the Unity 5 logo, so basicly no big work behind it. On the Second Splash Screen, i've created a mosaic like five ans placed it instead of the 5 logo.
I hope you like it.
Note: @ work, I only have paint.net...
Didn't worked for me unfortunately
Unlocked and rooted on latest global stable miui 8.
dd in terminal emulator went just fine.
After reboot, stock splash screen is still displayed.
Any idea what am I doing wrong?
Here is one I did for the Mi 4c http://forum.xda-developers.com/showpost.php?p=68648359&postcount=14
Seems cool, but RIP warranty
Thank you for your work.
just a few hours ago: ... searching the net for "convert rgb565 to rgb888" and trying to figure out a way to open the .img file with the boot logo image and do some personal tuning.
and then, Taà Daà! one pensiero* hit me, go check the friends at the XDA community!
* pensiero (italiano) = thought (english)
Borbingo Boy said:
Seems cool, but RIP warranty
Click to expand...
Click to collapse
What do you intend?
Fantastic. Thank you!
Will keep having a look here, interested in seeing what you guys come up with!
ain_gt said:
Thank you so much!! :good:
This is my splash image
Click to expand...
Click to collapse
nice sir, can you please provide it in .img format also?
Creepy splash screen (homage to H. R. Giger)
This is my first attempt at this "game".
The title of the image used for this splash screen is Bio-Mechanical Landscape I by Hans Rudolf "Ruedi" Giger.
Burs said:
Didn't worked for me unfortunately
Unlocked and rooted on latest global stable miui 8.
dd in terminal emulator went just fine.
After reboot, stock splash screen is still displayed.
Any idea what am I doing wrong?
Click to expand...
Click to collapse
Same for me, dont work, flash its Ok but still stock boot splash screen.
Small Image to try & trial & test
@fabioplata @Burs
Sometimes the script does not work depending on the specific environment where it is operating (the user computer), mainly is Python related.
Do you have it installed? wich version? Your Python is mission critical for your workflow / lifeflow? ...do you want to hunt down the problem?
My suggestion is: go with a virtual machine, a small one; bring it up for the work and then puff! close it when done. A fresh virtual machine is a blank slate so no mismatches between different/similia pieces of code.
If the problem is in the outcome and the delivery/deployment...
Did you try the 3 methods to accomplish this task?
Personally my preferenza goes to the flashable zip via twrp. ... and a "Dalvik" if there is time
For your testing in attach is available a small image: both versions, all 3 methods. Hope helps.
glogal said:
Sometimes the script does not work depending on the specific environment where it is operating (the user computer), mainly is Python related.
Click to expand...
Click to collapse
I don't think my issue is Python related, because I'm just flashing the same img file others flashed too (I don't even have that tool installed). My ultimate question is why other people can flash img file and everything works fine, but I still have the same logo image? Note that I have my Mi5 unlocked and rooted with latest twrp, and personally am very confident in what I'm doing. I tried it multiple times in many different ways (using Terminal, fastboot, and twrp), and damn thing just won't work for me.
Introduction:
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Easy selection of internal/external storage
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Source Code:
GitHub - https://github.com/TeamWin/android_bootable_recovery
Gerrit Instance - http://gerrit.twrp.me
If you have made your own TWRP build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.
Hello, this is TWRP, for Oneplus 7/Pro/5G that supports Android 11
can be flashed to boot with working decryption on android 11 roms
bugs:
backup/restore is unreliable
Installation:
1. fastboot boot twrp.img
2. go to Advanced > Flash Current TWRP
3. after that is done, if you were using a custom kernel, reflash it now
4. if you were using magisk, reflash it now
Updating to a newer build:
1. download new build to internal storage
2. go to Advanced > Install Recovery Ramdisk
4. select the new image
5. after that is done, if you were using a custom kernel, reflash it now
6. if you were using magisk, reflash it now
Send me a beer: Crypto(Preferred) | PayPal
Trees:
https://github.com/TeamWin/android_device_oneplus_guacamole
https://github.com/TeamWin/android_device_oneplus_sm8150-common
Telegram group: https://t.me/NSSFB
Download: https://twrp.me/oneplus/oneplus7pro.html
Unofficial 12 builds: https://www.pling.com/p/1835156/
Will there be an installer zip or just an .img?
bdwilk said:
Will there be an installer zip or just an .img?
Click to expand...
Click to collapse
Read the Installation instructions, there's a new experimental feature replacing the need for zips.
Nice, at least no more torturing my poor 7Pro with test images, haha.
Thanks.
And yes, the new feature is neat and works here pretty well.
Good job, @Nebrassy !
It says a11 ROMs can be decrypted is oos 11 also included in that ?
jaggillararla said:
It says a11 ROMs can be decrypted is oos 11 also included in that ?
Click to expand...
Click to collapse
Why don't you try it and give us feedback
@Nebrassy thank you . I am sure the entire Oneplus guys here appreciate it.
wartomato said:
Nice, at least no more torturing my poor 7Pro with test images, haha.
Thanks.
And yes, the new feature is neat and works here pretty well.
Good job, @Nebrassy !
Click to expand...
Click to collapse
Been using for awhile now it's awesome this will make things easier great job
jaggillararla said:
It says a11 ROMs can be decrypted is oos 11 also included in that ?
Click to expand...
Click to collapse
I'm using HavocOS 4.5 based on OOS 11 and managed to decrypt data partition just fine.
I can confirm it's working on OP7 with OB4 / Android 11.
Many thanks for the great job!
Uploaded new build with f2fs support
Toutatis_ said:
I'm using HavocOS 4.5 based on OOS 11 and managed to decrypt data partition just fine.
Click to expand...
Click to collapse
Did you need to wipe your phone? Recently installed Android 11 and I can't do nandroid backup and don't want to mess it again.
1 said:
Did you need to wipe your phone? Recently installed Android 11 and I can't do nandroid backup and don't want to mess it again.
Click to expand...
Click to collapse
No, I rebooted to bootloader mode, ran sudo fastboot boot filename.img and TWRP splash screen appeared, asking for password. I entered my password and that's it, data partition was decrypted. I finally rebooted to system.
@Nebrassy
Thanks for the great work btw. Appreciated.
This work with stock oos11 encrypted?
Can somebody elaborate this?
1. fastboot boot twrp.img (Which twrp is this? The one shared here?)
2. go to Advanced > Flash Current TWRP (What does current TWRP mean? Official TWRP? and where is that advanced? Advanced in new TWRP?)
1 said:
Can somebody elaborate this?
1. fastboot boot twrp.img (Which twrp is this? The one shared here?)
2. go to Advanced > Flash Current TWRP (What does current TWRP mean? Official TWRP? and where is that advanced? Advanced in new TWRP?)
Click to expand...
Click to collapse
Yes, run fastboot boot TWRP-3.5.1-guacamole-Nebrassy-2.img (this is the filename for the current latest version)
See my screenshot
Toutatis_ said:
Yes, run fastboot boot TWRP-3.5.1-guacamole-Nebrassy-2.img (this is the filename for the current latest version)
See my screenshot
Click to expand...
Click to collapse
Thanks a lot.
Can this be flashed within twrp if we're on the latest version from https://dl.twrp.me/guacamole/ ?