I was trying to ruu'ing and my sd card would not mount through the android recovery. So i wiped Dev/cache, cache, and system, thinking that it would fix the problem. Now i can not get into recovery mode and factory reset doesn't work and my phone is not being recognized by my PC. Anything i press in bootloader just reboots my device back to bootloader. I also locked my bootloader with the command "fastboot eom lock" i was experimenting and now i can not unlock it it say "relocked". What do i have to do to fix this?
Slax. said:
I was trying to ruu'ing and my sd card would not mount through the android recovery. So i wiped Dev/cache, cache, and system, thinking that it would fix the problem. Now i can not get into recovery mode and factory reset doesn't work and my phone is not being recognized by my PC. Anything i press in bootloader just reboots my device back to bootloader. I also locked my bootloader with the command "fastboot eom lock" i was experimenting and now i can not unlock it it say "relocked". What do i have to do to fix this?
Click to expand...
Click to collapse
If you place a Sense ROM PH98IMG on an external microSD card, does it install? Try that.
I cant seem to find an PH98IMG that will work. At this point do i have to flash boot or install an OTA (3.14.605.12)
I can not flash anything from the recovery. I also can not find an PH98IMG that would work at this point. the only think that im able to do is to get into bootloader which is relocked and i have s-on.
Do i need to unlock my bootloader to get into recovery?
How do i reinstall the whole system file?
Slax. said:
I can not flash anything from the recovery. I also can not find an PH98IMG that would work at this point. the only think that im able to do is to get into bootloader which is relocked and i have s-on.
Do i need to unlock my bootloader to get into recovery?
How do i reinstall the whole system file?
Click to expand...
Click to collapse
What is your current firmware/radio version from the bootloader screen?
My current radio version is 2.23.10.0123r
HBOOT is 2.28.0000
OpenDSP is v14.6.0.7708.00.0507
Slax. said:
My current radio version is 2.23.10.0123r
HBOOT is 2.28.0000
OpenDSP is v14.6.0.7708.00.0507
Click to expand...
Click to collapse
You are on current OTA firmware, and you said you were S-On so you can't RUU, there isn't one available and you can't go down a version.
You need to unlock your boot loader, get a ROM zip (any stable ROM will do, but I suggest Tachyon or Infection), download TWRP/CWM/PhilZ recovery, and you will need working adb/fastboot on a Win7/XP machine (Win 8/8.1 will not work).
Extract boot.IMG from ROM and recovery.IMG (name might vary) from recovery zip and place them in the directory with fastboot. Now start phone and fastboot and boot recovery with 'fastboot boot recovery.img', now in recovery wipe/format everything except external microSD, then Install/flash ROM zip. Reboot.
If you follow these instructions it should just boot now.
If you want stock, there is a ROM zip that the complete stock image with root applied in the development forum, its a page or two back though.
Sent from my Nexus 4 using Tapatalk
What are the TWRP/CWM/PhilZ recovery for?
Custom recovery, you need one, not all three... To wipe/format partitions and install custom zips
Sent from my Nexus 4 using Tapatalk
Related
Back from Moto-land with Rezound. I've flashed several ROMS and one I would like to flash now says that I must firs be on the leaked 3.11.605.22 firmware.
I thought that when I flashed a rom and it rebooted into bootloader to install the PH98IMG.zip file, that it was installing the necessary firmware. I'm confused.
How do I get to the necessary Leaked firmware. I've searched and googled, but everything I find, indicates that I cannot install the leak, because I have already used the HTC unlock tool. Again, confused
I appreciate your help!
ruu isn't a Tom that loads the kernel afterwards. the leak is flashed all at once which appears to be how kernels are flashed. flashing the leak requires the lock then it flashes everything together but remember it wipes all data with exception of external sd
Followup Q1: So is it possible to get to the RUU 3.11.605.22 firmware, WITHOUT re-locking and flashing the leak? (not concerned at all about full wipe, do it with each rom)
Q2: If I do have to re-lock and then flash the leak, do I first have to return to a 100% stock state (ie, restore all the bloat-ware and such)? (if you've ever had a Bionic you know what I'm talking about)
http://forum.xda-developers.com/showthread.php?p=23700622
Sent from my ADR6425LVW using Tapatalk
nukeboyt said:
Followup Q1: So is it possible to get to the RUU 3.11.605.22 firmware, WITHOUT re-locking and flashing the leak? (not concerned at all about full wipe, do it with each rom)
Q2: If I do have to re-lock and then flash the leak, do I first have to return to a 100% stock state (ie, restore all the bloat-ware and such)? (if you've ever had a Bionic you know what I'm talking about)
Click to expand...
Click to collapse
Originally Posted by JoelZ9614 View Post
Here are the instructions...
Download...
rename the zip to PH98IMG.zip
put on your sdcard
reboot to bootloader
fastboot oem lock
reboot to bootloader again
flash.
reboot to bootloader
[if it says security warning and tampered at the top flash again..after continue to next step]
fastboot flash unlocktoken Unlock_code.bin [of course only if u have ur original Unlock_code.bin if not do the whole htc thing again]
reboot......
A little confused. Android Police says you have to be fully stock with a locked bootloader to install 605.22. According to this, I don't have to be stock, I just have to relock it, and be aware that the full RUU install with radios will wipe my entire phone except external SD? (I wouldn't ask this except that it directly contradicts the AP post.)
And do we have the ability to re-root the resulting ICS installation?
And there's no other way to apply just the radios and the pre-rooted (Non-RUU?) version?
Does the pre-rooted version also do a full wipe?
cpurick said:
A little confused. Android Police says you have to be fully stock with a locked bootloader to install 605.22. According to this, I don't have to be stock, I just have to relock it, and be aware that the full RUU install with radios will wipe my entire phone except external SD? (I wouldn't ask this except that it directly contradicts the AP post.)
And do we have the ability to re-root the resulting ICS installation?
And there's no other way to apply just the radios and the pre-rooted (Non-RUU?) version?
Does the pre-rooted version also do a full wipe?
Click to expand...
Click to collapse
So far no other way to get the new radios , sounds like the only reason the OTA leak worked was the way it was packaged. This new leak isn't packaged the same way so you would have to relock and run the RUU to get the new radios.
Personally, all I did was reflash stock recovery before hand, but I had to run it a few times to get it to work fully and at one point I just relocked with amon recovery installed and ran it and it worked just fine. It wipes recovery as part of the installation and installs the updated stock recovery.
andybones said:
Originally Posted by JoelZ9614 View Post
Here are the instructions...
Download...
rename the zip to PH98IMG.zip
put on your sdcard
reboot to bootloader
fastboot oem lock
reboot to bootloader again
flash.
reboot to bootloader
[if it says security warning and tampered at the top flash again..after continue to next step]
fastboot flash unlocktoken Unlock_code.bin [of course only if u have ur original Unlock_code.bin if not do the whole htc thing again]
reboot......
Click to expand...
Click to collapse
Sorry for the questions, but when I do all of this, will I still have the Amon Ra recovery, or does this return to the stock recovery (which I assume it does)?
When the PH file is flashed in recovery it will overwrite whatever recovery you had flashed previously and leave you with stock everything...including recovery.
Sent from my ADR6425LVW
I was able to upgrade to the new ROM and then re-unlock my phone. But when I put Amon Ra in SD folder as PH98IMG.zip and reboot to the loader, I am never prompted to install it. Furthermore, attempts to get into recovery result in a green circular icon followed by a red triangle with exclamation point.
I tried all sorts of resets and reboots. Right now I have a green recovery option, but no working recovery. The top line says "UNLOCKED".
I've tried Amon Ra 3.13 and 3.14.
Download this file.
Place it in the same folder that you setup for the HTCdev unlock.
Rename it to "recovery."
Go to the command prompt and type in this command: cd c:\nameoffolder (mine is c:\Android for example)
Boot into Hboot
Select Fastboot
Connect to PC
Then type this exactly : fastboot flash recovery recovery.img
That should get you loaded with Amon Ra.
http://forum.xda-developers.com/showthread.php?p=19205213
Installation instructions are in the OP.
What you see now when you select recovery in hboot is what is considered stock recovery
Sent from my ADR6425LVW using Tapatalk
EmerikL said:
Download this file.
Place it in the same folder that you setup for the HTCdev unlock.
Rename it to "recovery."
Go to the command prompt and type in this command: cd c:\nameoffolder (mine is c:\Android for example)
Boot into Hboot
Select Fastboot
Connect to PC
Then type this exactly : fastboot flash recovery recovery.img
That should get you loaded with Amon Ra.
Click to expand...
Click to collapse
Thank you. I had already figured it out, and this is exactly what the problem was. Last time I flashed with a PH98IMG version of recovery, but this latest version that I have is for Fastboot. Thanks!
Never thought it would be such a relief to see the "TAMPERED" warning, lol.
All is good!
ZIP to fix mainver problems
http://forum.xda-developers.com/showpost.php?p=23169557&postcount=4
First of all i've been searching for a way to fix this for hours now without a solution.
My problem is as follows:
i installed official miui beta and got stuck with a boot loop, i was running 4text recovery but i wanted to try something different so i flashed twrp recovery in fastboot. however whenever i try to go into recovery now it just reboots and goes into boot loop again, so i cannot access recovery or boot into my rom.
I have tried flashing several recoverys via fastboot but each time it just reboots and does not enter recovery.
i have also tried rebooting into recovery using fastboot reboot recovery and adb reboot recovery but still it didn't work.
i have flashed another boot.img but now it just gets stuck on miui screen instead of boot loop
is there any way i can get any recoverys to work? i have tried looking for a 4text recovery.img as 4text was the last recovery to work but i can only seem to find the app that flashes it.
i have also tried flashing a rom through fastboot by typing fasboot flash zip rom.zip but it just says failure.
i am now downloading RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_radio_11.77.3504.00U_11.25.3504. and am going to try rename it to PG86IMG and update through bootloader after relocking it and then unlocking it again but i am not sure that will work.
in short i flashed a new recovery but it just reboots device when i try and enter it and the rom i am on happens to be stuck on boot loop so i cannot get in rom or recovery and flashing a new recovery does not work.
BTW i am S-ON HBOOT-1.49.0018
sorry for the lengthy post and also any grammatical errors as i am tired
Comments withdrawn
zcink said:
The whole problem, which is always the problem is you are S-ON. The MIUI rom will NOT run unless you install the newest firmware. You cannot install the newest firmware with S-ON because it is locked up in a partition that you cannot access unless you go s-off.
Has nothing to do with the recovery. I've been using 4ext recovery pretty much the whole time I've owned my EVO 3d and never had one single problem with it.
There are roms you can run with s-on but not the MIUI one.
Click to expand...
Click to collapse
cool, didn't know that, my problem now then is how can i reflash a different rom, bearing in mind that i cannot access recovery? do you think putting the pg86img stock ruu thingy on my sd and letting bootloader install that will work?
powellyable said:
cool, didn't know that, my problem now then is how can i reflash a different rom, bearing in mind that i cannot access recovery? do you think putting the pg86img stock ruu thingy on my sd and letting bootloader install that will work?
Click to expand...
Click to collapse
I do believe that if you are s-on, you should be able to relock the phone and then run the rru from your computer.
sonza said:
I do believe that if you are s-on, you should be able to relock the phone and then run the rru from your computer.
Click to expand...
Click to collapse
My next step was to relock it and run the ruu through bootloader, can you do it through computer/fastboot?
Sorry, I haven't been on the forum for a while.
Read the following link,
http://forum.xda-developers.com/showthread.php?t=1194053&highlight=relock
It should help you with the process.
The rru file you have should be an executable file that the name ends with "signed.exe" if memory serves. I do believe you can run this from your windows desktop if you are using windows. The link above has the adb command to use to relock the phone.
Once you are up and running again, you can install an ics rom even if you have s-on. I am running one but there are a few steps you need to do in the correct order so you don't end up where you are.
Good luck and have a great weekend!
Here is another good link to do what you are wanting to do.
http://forum.xda-developers.com/showthread.php?t=1578977
This might be even easier for you.
Comments withdrawn
my phone wasnt restoring my backups in twrp recovery and now i have no os and i can only get to bootloader, i relocked my bootloader so i could run ruu but my phone is on the latest version so nothings working, i need help as soon as possible please
kjrehrer said:
my phone wasnt restoring my backups in twrp recovery and now i have no os and i can only get to bootloader, i relocked my bootloader so i could run ruu but my phone is on the latest version so nothings working, i need help as soon as possible please
Click to expand...
Click to collapse
Put TWRP back on. Go into recovery. Keep connected to PC. Transfer a sense ROM and flash it. Assuming you're S-ON: flash MeanBean. Or flash a different sense ROM that has an S-ON installer. Or fastboot flash boot boot.img when you install.
Delakit said:
Put TWRP back on. Go into recovery. Keep connected to PC. Transfer a sense ROM and flash it. Assuming you're S-ON: flash MeanBean. Or flash a different sense ROM that has an S-ON installer. Or fastboot flash boot boot.img when you install.
Click to expand...
Click to collapse
how do i unlock the bootloader again because i relocked it
kjrehrer said:
how do i unlock the bootloader again because i relocked it
Click to expand...
Click to collapse
If you've unlocked the bootloader before then you know how to unlock the bootloader.
Delakit said:
If you've unlocked the bootloader before then you know how to unlock the bootloader.
Click to expand...
Click to collapse
yeah i got it but im putting the mean bean rom on my phone then do i wipe and just flash it?
Delakit said:
If you've unlocked the bootloader before then you know how to unlock the bootloader.
Click to expand...
Click to collapse
when i try to flash it i get "error executing updater binary in zip '/sdcard/meanrom...... error flashing zip" what do i do? every rom i try flashing gives me this error
Unlock the bootloader again, first of all.
Delete your current recovery.img.
Re-download your recovery.
fastboot erase cache
install your recovery again
fastboot erase cache
boot into recovery
when connected you should be able to transfer files from PC to phone.
Otherwise you might need to use USB-OTG I think.
wipe data, cache, delvik/cache, system
Install the ROM.
reboot to bootloader
pull boot.img out of your ROM download
fastboot flash boot boot.img
reboot to system.
Delakit said:
Unlock the bootloader again, first of all.
Delete your current recovery.img.
Re-download your recovery.
fastboot erase cache
install your recovery again
fastboot erase cache
boot into recovery
when connected you should be able to transfer files from PC to phone.
Otherwise you might need to use USB-OTG I think.
wipe data, cache, delvik/cache, system
Install the ROM.
reboot to bootloader
pull boot.img out of your ROM download
fastboot flash boot boot.img
reboot to system.
Click to expand...
Click to collapse
i get an error when i try to flash roms
kjrehrer said:
i get an error when i try to flash roms
Click to expand...
Click to collapse
Lol. I understand that. Not much I can do to help you if you don't try what I already suggested.
Delakit said:
Lol. I understand that. Not much I can do to help you if you don't try what I already suggested.
Click to expand...
Click to collapse
i sent you a direct message about this
Uncheck all options in twrp.
Sent from my EVO using Xparent Skyblue Tapatalk 2
I was flashing latest ota update with TWRP, now last thing i have to do is to flash firmware.zip
wich contains
boot.img
hboot_1.40.0000_signedbyaa.img
rcdata.img
recovery.img
Will i lose any data???
Im trying to get updated 1.17.401.3 with custom recovery, stock rom and root.
Can anyone confirm>??
thanks
IMO, the easiest way to do what you are asking is to just lock the bootloader, reboot into fastboot, and run the RUU.exe. It will update everything. After that, you just re-unlock your boot loader with the unlock.bin you used last time. Then install superSU.zip after you install a recovery. This process gets everything you want and takes about 10-15min.
badtlc said:
IMO, the easiest way to do what you are asking is to just lock the bootloader, reboot into fastboot, and run the RUU.exe. It will update everything. After that, you just re-unlock your boot loader with the unlock.bin you used last time. Then install superSU.zip after you install a recovery. This process gets everything you want and takes about 10-15min.
Click to expand...
Click to collapse
Thanks for your post!
Edit: i mean i have custom recovery TWRP no stock.
But what you said, i will lose data, pictures etc??
and what about my way, will i lose data too?
I flashed the firmware.zip and lost my whole sdcard so i'd back up before doing anything!
edit: you'll need to relock the bootloader to flash it too, which might be what actually wiped everything.
I have no os on my phone anymore, i have no idea where to even start. Ive been searching and searching forever now.
S-On
Hboot- 2.28
No Backup and Non-Root as well
Bootloader Unlocked
Is there anything i can do? I know the Hboot 2.28 RUU hasnt came out yet that i know of and researched of as well....Thanks in advance!
Your fine, did you just wipe everything or re-did the ruu?
If your did the ruu than you need to get your recovery back in your phone
If you just wiped everything in recovery than you need to download the ROM you want to use than install the zip in recovery but don't boot into it yet. Pull the battery and boot into bootloader and go into fastboot. Than on your PC take the boot.img file out of the ROM zip you just installed and flash it over ADB.
Fastboot flash boot boot.img
If you need any more help or questions I can continue to help or others will pop in
Edit: IF your trying to get back to just stock than you need to ruu again http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
You need to have a locked bootloader when flashing the ruu,
After downloading the file, rename it to "PH98IMG.zip" (no quotes)
Place the renamed file onto the root of the SD Card
Than boot into bootloader and it should load it up and install it, make sure to just leave it be. The phone might turn off than back on by itself once during the installation and that's normal, it'll continue installing and it will let you know when its finished
Sent from my ADR6425LVW using xda app-developers app
Add a rom zip file to your external sd card via your computer. And install it via yiur custom recovery. If for some reason you don't have a custom recovery, use Odin to go back to stock.
sent from a small tablet aka N2
Ok ive got a ROM installed but every time i try to flash the Boot.img it says "Failed (data transfer failure)"