Hello All,
I want to connect my Canvas HD to my ubuntu 12.04 machine for using adb shell.
I have done following steps but can't able to start adb shell
Enabled USB debugging on the phone
Connected phone to my ubuntu 12.04 using the USB cable
Type "./adb devices" to list connected devices but don't able to get it.
Please help
I'm not experienced with ubuntu...but I can help u if u tell me what recovery u have....u can start it via the recovery
Sent from my Micromax A116 using XDA Free mobile app
Resolved issue
Rahul Dhobi said:
Hello All,
I want to connect my Canvas HD to my ubuntu 12.04 machine for using adb shell.
I have done following steps but can't able to start adb shell
Enabled USB debugging on the phone
Connected phone to my ubuntu 12.04 using the USB cable
Type "./adb devices" to list connected devices but don't able to get it.
Please help
Click to expand...
Click to collapse
I have followed this link and able to connect my phone with adb
http://androidonlinux.wordpress.com/2013/05/12/setting-up-adb-on-linux/
Related
I have a superpad vimcro mid tablet 10.1 inch screen.
whenever i try to use adb it does everything upto waiting for device, then it just stays there for ever. i turned usb debugging on and connected my tablet to the computer. then i opened adb version 2.2 and it stays on waiting for device.
plz help!
cooperbeaman said:
I have a superpad vimcro mid tablet 10.1 inch screen.
whenever i try to use adb it does everything upto waiting for device, then it just stays there for ever. i turned usb debugging on and connected my tablet to the computer. then i opened adb version 2.2 and it stays on waiting for device.
plz help!
Click to expand...
Click to collapse
Do you have the drivers installed?
how can i install adb drivers for my tablet also for my computer to connect to my tablet because now it wont even recognize my tablet.
this post explains my computer drivers problem: http://forum.xda-developers.com/showthread.php?t=1474258
does anyone have the link for my tablets adb drivers and how to istall them
cooperbeaman said:
does anyone have the link for my tablets adb drivers and how to istall them
Click to expand...
Click to collapse
Your tablet doesn't need additional drivers to be installed. You should only need to install the drivers on your PC, and you're good to go.
i know but i still need the link to install the adb drivers on my computer
cooperbeaman said:
i know but i still need the link to install the adb drivers on my computer
Click to expand...
Click to collapse
Try checking your device's manufacturer's website.
restart your adb service
how do I restyart my adb service?
Hey XDA I got my DNA the day it was released and love it. I am a creature of habit though so i want to root it like my past dinc2. I am running into a problem though. the command
Code:
adb devices
doesn't return my device. when i type in
Code:
fastboot devices
my phones serial number comes up, like it should. Fastboot works but ADB doesn't. I am trying to do JCase's Bootloader Exploit. I have the drivers installed, environment variable path set to my adb/fastboot location, and java sdk and android sdk all installed. I know ADB doesnt recognize it in the fastboot menu, just the beginning menu so that's what I'm doing. How can i get ADB to recognize my device like fastboot does.
Here's what I'm getting:
Code:
C:\And-sdk\platform-tools>adb devices
List of devices attached
C:\And-sdk\platform-tools>fastboot devices
FA2BBS500706 fastboot
Any help is greatly appreciated!!
Um, do you have usb debugging enabled.
Sent from my HTC6435LVW using xda app-developers app
termin8tor22 said:
Hey XDA I got my DNA the day it was released and love it. I am a creature of habit though so i want to root it like my past dinc2. I am running into a problem though. the command
Code:
adb devices
doesn't return my device. when i type in
Code:
fastboot devices
my phones serial number comes up, like it should. Fastboot works but ADB doesn't. I am trying to do JCase's Bootloader Exploit. I have the drivers installed, environment variable path set to my adb/fastboot location, and java sdk and android sdk all installed. I know ADB doesnt recognize it in the fastboot menu, just the beginning menu so that's what I'm doing. How can i get ADB to recognize my device like fastboot does.
Here's what I'm getting:
Code:
C:\And-sdk\platform-tools>adb devices
List of devices attached
C:\And-sdk\platform-tools>fastboot devices
FA2BBS500706 fastboot
Any help is greatly appreciated!!
Click to expand...
Click to collapse
having the same issue. I can issue commands through fastboot and ADB commands when I'm in recovery but not when my phone is fully booted.
Try going into slept dev. settings turning adb debugging off then back on
Sent from my HTC6435LVW using xda premium
@Bigandrewgold:
Its really bugging me. All Google says is "ADB works, Fastboot doesn't" and that's the opposite of our problem!!!
@Chyrux:
Um, do you have usb debugging enabled.
Click to expand...
Click to collapse
yes, usb debugging is enabled, has been (I'm not that dumb haha).
@starscream86:
Try going into slept dev. settings turning adb debugging off then back on
Click to expand...
Click to collapse
Not sure what "slept dev. settings" is (typo maybe??). I have on/off'd dev settings and check/unchecked usb debugging a alot of times to no success.
Here's the cure all....I'm assuming you have the lastest SDK and have yor ADB folder set to something simple like C:\ADB and I'm also assuming you are running Windows
I had the same issue ....initially I had no issue in ADB and I was able to do the CIG change and unlock on HTC Dev..but later on I installed HTC sync drivers and from then on no matter what I did only fastboot commands worked in recovery...ADB did not in recovery or when my phone was running normal.
So...uninstall all htc SYnc and driverin programs/features on oyur laptop...reboot your laptop. on the laptop download and instal PDANet 3.50 (its free). it will prompt you to connect your phone and will install a proper driver (and also throw the pda net 3.50 program on your phone). Once you have successfully installed it, ADB should work perfectly for you.
bakemcbride21 said:
Here's the cure all....I'm assuming you have the lastest SDK and have yor ADB folder set to something simple like C:\ADB and I'm also assuming you are running Windows
I had the same issue ....initially I had no issue in ADB and I was able to do the CIG change and unlock on HTC Dev..but later on I installed HTC sync drivers and from then on no matter what I did only fastboot commands worked in recovery...ADB did not in recovery or when my phone was running normal.
So...uninstall all htc SYnc and driverin programs/features on oyur laptop...reboot your laptop. on the laptop download and instal PDANet 3.50 (its free). it will prompt you to connect your phone and will install a proper driver (and also throw the pda net 3.50 program on your phone). Once you have successfully installed it, ADB should work perfectly for you.
Click to expand...
Click to collapse
This didn't work for me... PDANet gave me error 103 when i connected my phone. I have uploaded the image.
termin8tor22 said:
This didn't work for me... PDANet gave me error 103 when i connected my phone. I have uploaded the image.
Click to expand...
Click to collapse
yeah, whatever Windows or other HTC driver you have that install for thephone is still on the laptop and that will conflict when installing.
You get PDANet to install successfully your ADB will come back.
In your programs and features make sure HTC SYnc AND HTC Drivers are unisntalled.
No idea if Windows 8 is more of a pain..I'm still on 7
before anything else, make sure your sdk is updated to an ics or later level
i just update the sdk whenever google pushes an update
I'm on 7 as well. How can I uninstall the drivers for good, like to the point where its like the first time I'm connecting my phone to pc again
Sent from my HTC6435LVW using xda app-developers app
termin8tor22 said:
I'm on 7 as well. How can I uninstall the drivers for good, like to the point where its like the first time I'm connecting my phone to pc again
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
With your phone not attached..
Control Panel- Programs Features...when I had HTC Sync installed I had to uninstall that AND the program entry for HTC Drivers as well.
You can then also use USBDeview..sort/toggle by Last Plug/Unplug and uninstall any Android drivers you see which could be conflicting.
Reboot, Install PDA Net and attach the phone when prompted. Also accept the driver even though you get the warning that it isn;t digitally signed from JuneFabrics.
This didn't work I'm still getting error 103 Android Device not found
Update:
I got Pdanet installed via putting the phone into fastboot mode and installing Pdanet on the computer.
I did notice that when im in fastboot my Android adb interface (in device manager) popped up but when I left fastboot mode and went to the bootloader my Android adb interface went away, this may be my issue with adb devices not working i think...
Sent from my HTC6435LVW using xda app-developers app
i am currently having this same issue. i did as you did and went to usbfastboot loader and tried installing pda net. i also saw the same adb device pop up but my install is stuck at installing pdanet phone and not moving. did you leave it in fastboot mode or did you reboot back?
Hi, I have already had my USB debugging enabled and from my device manager I can see my device there showing "ASUS Android Devices" > "Asus Android Composite ADB Interface".
But when I reboot my tablet as USB mode and from my laptop I run cmd as Administrator, and run "adb devices" command, it just show me "List of devices attached" and then the command prompt.
I have already unlock and rooted my tablet.
Why I can't see my device id ? Please help
Try: Connect/disconnect device from USB. Kill adb server (adb.exe) from DeviceManager, and then run "adb devices" again. Also make sure that correct USB drivers are installed for your device.
knutson said:
Try: Connect/disconnect device from USB. Kill adb server (adb.exe) from DeviceManager, and then run "adb devices" again. Also make sure that correct USB drivers are installed for your device.
Click to expand...
Click to collapse
Yeah this process is correct. Even I've experienced this.
What I did is:
Removed the USB cable connection and reconnect.
Kill adb.exe
Restart adb.
Then device was shown to be connected.
knutson said:
Try: Connect/disconnect device from USB. Kill adb server (adb.exe) from DeviceManager, and then run "adb devices" again. Also make sure that correct USB drivers are installed for your device.
Click to expand...
Click to collapse
Yes, I did that but still the same. Any other suggestions?
If on windows make sure your driver's are installed.
Type in cmd
adb kill-server
adb start-server
If that doesn't work try a different usb slot. You could also try moving adb and it's dependencies to your system32 folder. It's where all your commands are stored for cmd. You won't have to navigate to the android sdk tools.
Sent from my SPH-L710 using Tapatalk 2
Have you enabled Debugging on in your phones Developer settings?
ngaisteve1 said:
Yes, I did that but still the same. Any other suggestions?
Click to expand...
Click to collapse
it's so easy, just turn off your android device, then hold down both "Volume Down" key and "Power" at the same time, wait a few seconds till it start in recovery mode, done.
now type adb devices, and you'll see your device.
no need for that.
close any adb process either from task manager or by typing: "adb kill-server" in adb console
close everything and use this customized adb file I attached, it'll show your device.
it also has instructions and necessary files for rooting your device.
Problem
knutson said:
Try: Connect/disconnect device from USB. Kill adb server (adb.exe) from DeviceManager, and then run "adb devices" again. Also make sure that correct USB drivers are installed for your device.
Click to expand...
Click to collapse
I have LG Optimus G (E975) i wipped all from the device and now i can't put cm11 on it, adb sideload do not work, and list of devices attached is empty. what must i do to put CM11 on my phone?:crying:
I'm having the same issue but I have a ! triangle on my Nexus 5 under Other Devices. Any suggestions???
I have the same issue on my nexus 4. Yesterday it showed up with adb devices, now it's an empty list. I have USB debugging enabled and tried restarting the server. Nothing works. Any ideas?
ldemon360 said:
I'm having the same issue but I have a ! triangle on my Nexus 5 under Other Devices. Any suggestions???
Click to expand...
Click to collapse
unplug the device and adb kill-server then replug the device and try
turn debugging off and then on again
I had the same problem. In my case, i had forgot to enable usb debugging after new rom.
ngaisteve1 said:
Hi, I have already had my USB debugging enabled and from my device manager I can see my device there showing "ASUS Android Devices" > "Asus Android Composite ADB Interface".
Click to expand...
Click to collapse
In your case just disable USB debugging and then enable again.
fix the driver
I had this issue.
In my case when I went to device manager I could see the Device and wasn't installed correctly and could not load the drivers even after having installed them on the PC.
SO I clicked update drivers.
Select that will chose the drivers to install and select the Android Devices - ADB driver.
You will get a warning, but just ignore it and load the ADB driver for the phone.
Ensure you are in the sideload option of the recovery
Now
adb devices
it should show up as Sideload
Now sideload
Cheers
Dirk
knutson said:
Try: Connect/disconnect device from USB. Kill adb server (adb.exe) from DeviceManager, and then run "adb devices" again. Also make sure that correct USB drivers are installed for your device.
Click to expand...
Click to collapse
Thanks, this worked for me.
Just add ur device id in adb.ini
Same issue was faced by me on my micromax Q334 and xolo era, I search lot for that and finally just adding hardware id the device are detected under adb.The steps are clearly shown in my video below..
It will definitely going to sort this problem..
For that just right click on adb driver ,navigate to detail tab and search for hardware id then add to adb.INI
I have also uploaded video on that YouTube: Fix adb connection issue(Adb driver installed, but device not listed)
device listed as "? recovery"
hey,
am trying to connect honor 6(h60-L04) but am not able to see the proper name for my device is just showing "? recovery" and am trying to update the android version coz of the device is in reboot-loop so help me out here
if there is any other option to recover device give me link.
knutson said:
Try: Connect/disconnect device from USB. Kill adb server (adb.exe) from DeviceManager, and then run "adb devices" again. Also make sure that correct USB drivers are installed for your device.
Click to expand...
Click to collapse
not work my friend, the list of devices is empty
Put your phone in PTP mode... just found this. When it was on charge or MTP nothing would connect, but when it was in PTP adb.exe said "error: device offline", but on phone it asked if I wanted to trust the computer!!! Ohhhkay, now we're getting somewhere. Clicked trust and ran adb devices and there it is
See below... I found there are two versions of adb.exe I was using. PTP is not the problem, but adb.exe has to be the right one or it just says offline.
vern.zimm said:
Put your phone in PTP mode... just found this. When it was on charge or MTP nothing would connect, but when it was in PTP adb.exe said "error: device offline", but on phone it asked if I wanted to trust the computer!!! Ohhhkay, now we're getting somewhere. Clicked trust and ran adb devices and there it is
Click to expand...
Click to collapse
ALSO!! Get the newest driver pack from LG "LGMobileDriver_WHQL_Ver_4.1.1". The driver packs in the roots that I downloaded aren't new enough. After Windows got the right drivers I was able to see the COM ports properly.
I'm not sure if I have the root working currently. The "Newest root method V03" where you click on root.bat seems to pick the wrong COM port. When I try to do it manually with Send_command.exe using the other COM port it seems like the root process doesn't work properly. It eventually completes, but no info about what it did etc.
I'm using an LG Transpyre VS810PP with Android 5.1.1 currently, and a Windows 10 64-bit machine.
Hi there,
I'm having problems when trying to install a ROM through the 'install zip from sideload' feature in ClockworkMod 6.0.4.3. My Windows 8.1 PC can't recognize the device at all while in the sideload (Mounting USB storage works perfectly). The device doesn't show up when I type
Code:
adb devices
in the command prompt, even when I run it as an administrator. It can't be the recovery because I've tried downloading from different places and tried to flash about 3 times.
Is anyone else having this problem? Or has had this problem in the past but has solved it already?
Thanks in advance
Do you have usb debugging enabled on the phone? It's under the developer options.
Swiftflikk said:
Hi there,
I'm having problems when trying to install a ROM through the 'install zip from sideload' feature in ClockworkMod 6.0.4.3. My Windows 8.1 PC can't recognize the device at all while in the sideload (Mounting USB storage works perfectly). The device doesn't show up when I type
Code:
adb devices
in the command prompt, even when I run it as an administrator. It can't be the recovery because I've tried downloading from different places and tried to flash about 3 times.
Is anyone else having this problem? Or has had this problem in the past but has solved it already?
Thanks in advance
Click to expand...
Click to collapse
Adb sideload should be working fine. Make sure you're not using a 3.0 usb hub.
Sent from my HTC One Max using Tapatalk!
Is it possible to use adb wirelessly on my phone without rooting without connecting via USB cable for once?....my laptop USB port has broken....and need to connect via adb....please help
daemonindia said:
Is it possible to use adb wirelessly on my phone without rooting without connecting via USB cable for once?....my laptop USB port has broken....and need to connect via adb....please help
Click to expand...
Click to collapse
You can only connect adb wirelessly after rooting your android.
Clarification required
Ashwinrg said:
You can only connect adb wirelessly after rooting your android.
Click to expand...
Click to collapse
"Connect device via USB and make sure debugging is working, then run:
adb tcpip 5555
adb connect <DEVICE_IP_ADDRESS>:5555
Disconnect USB and proceed with wireless debugging.
When you're done and want to switch back to USB debugging, run:
adb -s <DEVICE_IP_ADDRESS>:5555
To find the IP address of your device, go to Settings > Wi-Fi > Advanced > IP Address on your device or run adb shell netcfg.
No root required. Only one device can be debugged at a time"
Is this process not possible after marshmallow update?