I have a Verizon SCH-I605 Note 2. I rooted and unlocked the boot loader when it was on 4.1.2. I have since then flashed 4.3 Roms through TWRP and because of that, it didn't install KNOX at all.
I was having issues with the Bluetooth and WiFi radios recently. Randomly they would stop working and not turn on at all. The toggles would turn light green and act like they were gong to turn on but didnt. They just turned grey again. Then a few hours to a day later they would randomly work and turn on and work. Then randomly they wouldn't work again. I tried to see if there was a pattern to when they would stop working but there wasn't.
At first I thought it was an app that I had installed that was causing it. So I flashed the same and other roms after wiping "everything". That would seem to work for a while but soon it happened again. It even did it without installing any additional apps after flashing. I decided to flash the stock rooted 4.3 OTA. That didn't work either. I then decided to flash stock and unrooted 4.3 using mobile Odin and inject superuser and mobile Odin. Right of the bat WiFi and Bluetooth didn't work. I am ALMOST convinced that it is hardware related now. Any thoughts on what would be causing it?
Also when I flashed it stock and unrooted with mobile odin, It kept root but I lost TWRP. And when I boot into download mode, it doesn't show the KNOX counter line at all so i am assuming that it didnt install it. Is it possible to flash back stock to 4.1.2 with odin and then re root and unlock the boot loader? Or is there another way to get TWRP back?
Any help or feedback is greatly appreciated
Related
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
dar101978 said:
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
Click to expand...
Click to collapse
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
CalcProgrammer1 said:
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
Click to expand...
Click to collapse
Thanks thats what i did, I just basically had to use KIES to use the emergency recovery, then root my phone again. My question is what version of TWRP causes this? cause i used the newest version i could find off GOO. My other concerne is, will it accept or be safe to use a custom ROM? Well i gues ill find out :laugh: THANKS AGAIN!
Everyone with the sgh-i717 is having problems with the latest TWRP and the most stable version is 2.5.0.0. Go with that one or you'll be starting all over again I imagine. And don't just stop at the download link in the OP's, read the thread and find out what's going on. The problems with TWRP have been going on for a while and the development threads have a lot of comments about the latest build causing problems. Good luck! :good:
A couple of weeks ago I bought a Galaxy Note 2 from Simple Mobile began to experiment with it. Later on I managed to root it, but I accidentally flashed a recovery via Rom Manager which after a restart broke my phone.
After that I flashed a OTA through Odin of Verizon 4.1.2. The system booted and everything but the radio was missing meaning that I could not text or use 3G. I looked for many ways to restore it but none worked.
I later on flashed a T-Mobile ROM thinking it will help restore the radio and it did successfully flash the ROM through the recovery. But the ROM turned out to be 4.3 and the radio still didn't work. Later on in the same day I flashed an OTA of T-Mobile through Odin and that's when this happened. My phone bootloops really fast when I turn it on. The recovery doesn't show up at all. And every time I flash anything through Odin it fails. I've felt ashamed all this time and it took me a while to reflect and face what I've done and decided to post on here to get help.
Thanks for reading! Any help is appreciated. I will try every method that gets posted and will post back results.
Chronosin said:
A couple of weeks ago I bought a Galaxy Note 2 from Boost Mobile began to experiment with it. Later on I managed to root it, but I accidentally flashed a recovery via Rom Manager which after a restart broke my phone.
After that I flashed a OTA through Odin of Verizon 4.1.2. The system booted and everything but the radio was missing meaning that I could not text or use 3G. I looked for many ways to restore it but none worked.
I later on flashed a T-Mobile ROM thinking it will help restore the radio and it did successfully flash the ROM through the recovery. But the ROM turned out to be 4.3 and the radio still didn't work. Later on in the same day I flashed an OTA of T-Mobile through Odin and that's when this happened. My phone bootloops really fast when I turn it on. The recovery doesn't show up at all. And every time I flash anything through Odin it fails. I've felt ashamed all this time and it took me a while to reflect and face what I've done and decided to post on here to get help.
Thanks for reading! Any help is appreciated. I will try every method that gets posted and will post back results.
Click to expand...
Click to collapse
I have a very similar problem. hope you get help on this, I have been trying to fix this problem for a month.
The 4.3 update is where the issue came from if it will allow you to flash try using a custom rom to get you out the boot loop but because the 4.3 bootloader is locked you now have another issue you will now have to run a virtual rom and there is a certain way you have to do it or you will completely brick your phone try researching first Google your phone model with the rom build 4.3 root you have to root it now before you can do any modifications at this point
Sent from my SCH-I605 using XDA Free mobile app
I've had my brand new SCH-I545 since thanks giving now. I've been trying to root and get a custom ROM on the phone ever since then and have gotten closer and closer but haven't been able to quite get everything to co-operate.
I may catch scorn for posting such a generic question on a flagship phone but I've been up all night for 2 weeks now trying to get this to work following numerous tutorials but with android everything seems to get outdated when there are so many software variables at hand that are constantly changing like firmwares and build numbers. I've included all the info since it all seems to be vital and have tried to seperate tasks by paragraph so you can skip over what you feel may be arbritrary. So if I could get an up to date breakdown on how I could succeed in my endevour I'd appreciate it greatly.
Out the box I have a 4.4.2 and NK1 build number. I was finally able to get root access through towel root after flashing back to NC5. However even after flashing NC5 through odin, about phone still says my baseband and build number end I545VRUFNK1 but towelroot no longer gives me the "phone not supported" message and I'm able to succesfully atain root access, confirmed by root checker. Is that normal?
So I have root now but want a custom ROM. VZW locks the bootloaders on new phones so I believe that means I can't use a custom recovery like CWM. I've tried and tried but it doesn't work, neither does the CWM Rom manager app. I've managed to get a custom recovery through installing BusyBox and Safestrap. (I had to go through several apk's to get Safestrap to work. Usually I would be able to enter TWRP recovery through it but the recovery won't respond to any of my touches. The power button still works to turn the screen on and off so it is not frozen but it won't respond when I swipe to unlock it. Even now that I have it working, if the screen locks I'm unable to unlock it even if TWRP is performing a task in the backround and clearly not frozen.
One time I was able to more or less successfully flash LiquidSmooth (LS-KK-v3.2-2014-10-04-jflte.zip). This was the closest I ever got to my goal as the ROM succesfully booted up and I was able to browse the home screen and change all the settings and it was a moment of joy until I went to settings and switched wifi on it just wouldn't. It either just wouldn't switch or would switch right back and grey itself out I don't remember exactly. My phone had no service either for calls, text or 4G. So everything worked internally it just couldnt comunicate with any signals coming from outside the phone. Why would this be? If I manage to boot LiquidSmooth again is there something I could download to make the wifi/service work? (I could download through USB or Odin.)
After this I tried to flash CM but the phone wouldnt even start after installation and would just bootloop so I had to flash back to stock to make it work again. Then I tried LiquidSmooth several more times but now I get stuck at the bootscreen for LiquidSmooth where it has the logo and the backround flashing. I've let the animation loop for several minutes multiple times before doing a battery pull.
Basically for 2 weeks I've been flashing NC5->rooting->flashing NK1 back->installing safestrap->installing a rom->soft bricking->flashing back to stock ROM and starting again
Is it possible if I keep doing this proccess that it will just work one time? It may sound silly but I kind of believe just because I've had varrying degrees of success following the exact same procedure.
And when I install a ROM in TWRP I go Wipe->(swipe factory reset)->Install->(select LS.zip and wait for it to say its succesfully installed)->Swipe one more time to wipe cache->Reboot after this the phone either fails to start up or loops the LiquidSmooth animation. As I said, one time it started succesfully.
Let me know what any of this information leads you to believe and if you may have a sollution in mind. Huge thanks to anyone that read this and will try to help me. I've had this phone 2 weeks now and would like to start actually using it.
unorthodocks said:
I've had my brand new SCH-I545 since thanks giving now. I've been trying to root and get a custom ROM on the phone ever since then and have gotten closer and closer but haven't been able to quite get everything to co-operate.
I may catch scorn for posting such a generic question on a flagship phone but I've been up all night for 2 weeks now trying to get this to work following numerous tutorials but with android everything seems to get outdated when there are so many software variables at hand that are constantly changing like firmwares and build numbers. I've included all the info since it all seems to be vital and have tried to seperate tasks by paragraph so you can skip over what you feel may be arbritrary. So if I could get an up to date breakdown on how I could succeed in my endevour I'd appreciate it greatly.
Out the box I have a 4.4.2 and NK1 build number. I was finally able to get root access through towel root after flashing back to NC5. However even after flashing NC5 through odin, about phone still says my baseband and build number end I545VRUFNK1 but towelroot no longer gives me the "phone not supported" message and I'm able to succesfully atain root access, confirmed by root checker. Is that normal?
So I have root now but want a custom ROM. VZW locks the bootloaders on new phones so I believe that means I can't use a custom recovery like CWM. I've tried and tried but it doesn't work, neither does the CWM Rom manager app. I've managed to get a custom recovery through installing BusyBox and Safestrap. (I had to go through several apk's to get Safestrap to work. Usually I would be able to enter TWRP recovery through it but the recovery won't respond to any of my touches. The power button still works to turn the screen on and off so it is not frozen but it won't respond when I swipe to unlock it. Even now that I have it working, if the screen locks I'm unable to unlock it even if TWRP is performing a task in the backround and clearly not frozen.
One time I was able to more or less successfully flash LiquidSmooth (LS-KK-v3.2-2014-10-04-jflte.zip). This was the closest I ever got to my goal as the ROM succesfully booted up and I was able to browse the home screen and change all the settings and it was a moment of joy until I went to settings and switched wifi on it just wouldn't. It either just wouldn't switch or would switch right back and grey itself out I don't remember exactly. My phone had no service either for calls, text or 4G. So everything worked internally it just couldnt comunicate with any signals coming from outside the phone. Why would this be? If I manage to boot LiquidSmooth again is there something I could download to make the wifi/service work? (I could download through USB or Odin.)
After this I tried to flash CM but the phone wouldnt even start after installation and would just bootloop so I had to flash back to stock to make it work again. Then I tried LiquidSmooth several more times but now I get stuck at the bootscreen for LiquidSmooth where it has the logo and the backround flashing. I've let the animation loop for several minutes multiple times before doing a battery pull.
Basically for 2 weeks I've been flashing NC5->rooting->flashing NK1 back->installing safestrap->installing a rom->soft bricking->flashing back to stock ROM and starting again
Is it possible if I keep doing this proccess that it will just work one time? It may sound silly but I kind of believe just because I've had varrying degrees of success following the exact same procedure.
And when I install a ROM in TWRP I go Wipe->(swipe factory reset)->Install->(select LS.zip and wait for it to say its succesfully installed)->Swipe one more time to wipe cache->Reboot after this the phone either fails to start up or loops the LiquidSmooth animation. As I said, one time it started succesfully.
Let me know what any of this information leads you to believe and if you may have a sollution in mind. Huge thanks to anyone that read this and will try to help me. I've had this phone 2 weeks now and would like to start actually using it.
Click to expand...
Click to collapse
The issue is that safestrap is incompatible with the roms you are trying to use. It can be only used with Touchwiz based roms(i.e. using the stock kernel). Try flashing hyperdrive rom. Also, Im not familiar if NK1 can use towelroot and safestrap well. My recommendation would be to
1. clean wipe to nc5
2. towel root
3. install safestrap
4. flash ONLY roms that say they were safestrap compatible.
5. Flash any patches, modems, etc.
Weeks? How about spending a few hours reading up on what you can and can't do with your phone.
Raymondlikesroot said:
The issue is that safestrap is incompatible with the roms you are trying to use. It can be only used with Touchwiz based roms(i.e. using the stock kernel). Try flashing hyperdrive rom.
Click to expand...
Click to collapse
Ok, thanks, I was going to try to flash hyperdrive but the ROM I found was 1.2GB and I didn't have that much space on my SD. I'll borrow an empty one and try it again. Is it not odd that LS did a full boot if it's not compatible with safestrap? And are there any other Touchwiz roms? I don't like Touchwiz and am trying to get as far from it as I can but if I could just delete the bloatware (which I can still only disable after towel root), get SD access and get rid of the battery restrictions.
unorthodocks said:
Ok, thanks, I was going to try to flash hyperdrive but the ROM I found was 1.2GB and I didn't have that much space on my SD. I'll borrow an empty one and try it again. Is it not odd that LS did a full boot if it's not compatible with safestrap? And are there any other Touchwiz roms? I don't like Touchwiz and am trying to get as far from it as I can but if I could just delete the bloatware (which I can still only disable after towel root), get SD access and get rid of the battery restrictions.
Click to expand...
Click to collapse
The reason that LS did a full boot is because certain aosp roms can function with a touchwiz kernel. However, the result is always buggy. There is s4 verizon general thread talking about this.
There are many other tw roms. Just go to andriod devlopment! On the top of my head, I can think of eclipse, hyperdrive, echoe, and empty galaxy.
I rooted my wife's phone last week using KingRoot and the Super-sume. Installed Titanium Backup and everything was working fine. She was given a notice to take an OTA update today which she did. Now the phone is stuck on the Samsung screen with the unlocked padlock. When I boot into recovery, it automatically tries to install the update, but gets an error. It then reboots and just hangs up on the Samsung Custom screen again.
How can I get this back to stock?
I can get into ODIN mode if that helps.
I found this thread and downloaded the pit file at the bottom for the Verizon version. Is this what I want to flash with ODIN? Will this fix the issue?
http://forum.xda-developers.com/showthread.php?t=2265477
So after more reading I don't think that will work as the phone was on OCT I think. It was on 5.0.1. I can't get it past the Samsung screen so I can't check.
Can someone please help....my wife is ready to kill me!!!!!!!
Nevermind. I figured it out. I found stock 5.0.1 firmware and was able to install it using ODIN. Working perfectly now.
So the first thing was I rooted a Samsung S4 SGH-M919.
I used Chainfire's files and Odin. it worked just fine.
Gave the phone to my wife but the firmware 4.4.2 was clearly outdated that none of the apps she played worked, everything just froze on her or crashed.
So I decided to install a custom rom, this led me to Imperium Lollipop 5.0.1
Well that in turn made the phone unbootable. It would continuously go into these 4 circular swirling balls and get stuck there. I cant even get into Recovery Mode. Only Download Mode.
So this made me do some searching and I dl'ed SGH-M919 stock firmware 4.2.2
I used Odin to flash that and it failed.
So now the phone boots into a screen that telling me to uses Kies to fix the issue.
I'm at a loss what to do next.
Can someone give me the necessary steps to fix the phone and where I intended to go with this?
Much appreciated. thanks.
catheapp said:
So the first thing was I rooted a Samsung S4 SGH-M919.
I used Chainfire's files and Odin. it worked just fine.
Gave the phone to my wife but the firmware 4.4.2 was clearly outdated that none of the apps she played worked, everything just froze on her or crashed.
So I decided to install a custom rom, this led me to Imperium Lollipop 5.0.1
Well that in turn made the phone unbootable. It would continuously go into these 4 circular swirling balls and get stuck there. I cant even get into Recovery Mode. Only Download Mode.
So this made me do some searching and I dl'ed SGH-M919 stock firmware 4.2.2
I used Odin to flash that and it failed.
So now the phone boots into a screen that telling me to uses Kies to fix the issue.
I'm at a loss what to do next.
Can someone give me the necessary steps to fix the phone and where I intended to go with this?
Much appreciated. thanks.
Click to expand...
Click to collapse
Are you sure that you have the right bootloader installed for the lollipop rom? Did you factory reset before installing custom rom? Try to wipe davlik after installation completes before restarting device. Also follow the instructions given by the rom thread op.