Related
hi guys
download the zip below and flash it through cwm
or
extract the zip and use the root explorer and paste the files in respective folder
change the permission like
* * x
* x x
* x x
reboot your device and njoy the new boot animation and bootsound
i am afraid to use CWM because of i didn't have the cwm zip file. Can you post the procedure to use CWM? thanks in advance
Moved to Themes & Apps.
info
Srika said:
hi guys
download the zip below and flash it through cwm
or
extract the zip and use the root explorer and paste the files in respective folder
change the permission like
* * x
* x x
* x x
reboot your device and njoy the new boot animation and bootsound
Click to expand...
Click to collapse
pls more info about it and screenshot
valerik1989 said:
pls more info about it and screenshot
Click to expand...
Click to collapse
i´ve just downloaded it, and it´s the classic galaxy nexus bootanimation.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed.
This rom is for both the Nook Tablet 512M/8GB and 1GB/16GB versions. The device code name is "acclaim".
Prerequisites:
A CWM recovery. To install CWM when coming from a stock device, you need to prepare a special SD card. Installation instructions can be found here on xda.
Installation:
Grab a new recovery (e.g. here http://goo.im/devs/chrmhoffmann/cm-11.0/acclaim/recovery-20140502.img) and flash it with fastboot. You will need to update the recovery in case you have an older one from CM 10.2 or older.
If you have a recent CM 10.1 installed, flash the new recovery and try the updater, otherwise download the zip from nightlies, boot to CWM and flash it.
Once a version is installed, you can update with CM Updater
Settings->About tablet->CyanogenMod updates->Refresh
Building:
The CM wiki explains that here: http://wiki.cyanogenmod.org/w/Build_for_acclaim
Returning to stock BN firmware:
If you have installed above rom and the CWM recovery and you really hate it and want to go back to stock, you may wish to try to flash the original acclaim_update.zip from BN. You have to unzip that file and edit META-INF/com/google/android/updater-script. Drop the first two lines here:
assert(getprop("ro.product.device") == "blaze" ||
getprop("ro.build.product") == "blaze");
Zip the package again. Then go to CWM, flash the zip, wipe, and reboot.
Support:
For any issues encountered, please post into this forum, but add steps to reproduce and dmesg and logcat information. If you don't know what this is or how to get them, try to find that out first before posting here.
Developers:
hashcode, ntemis, kuzma30, fattire, mik_os, chrmhoffmann, and many others that contribute to cyanogenmod and especially this version
Thanks:
kuzma30 - great kernel job
hashcode - we have reused lots of your work and effort for the various omap devices (esp kindle fire). It is thanks to you mainly that we are now official CM device.
mik_os - great touchscreen firmware flasher and other efforts
fattire - for helping us everywhere he can
ntemis - thanks for giving so much energy to this - esp for 4.4 I have copied lots of things from you
DISCLAIMER:
- update the CWM if you come from older versions - otherwise you'll see funny error messages when installing zip
- It is possible that you need to wipe your device. I did not do that, but...
- Also you must flash 4.4 gapps. It can be found somewhere....
- The SELINUX policies are not yet enforced.
Known issues:
- Wifi "works" but a clean fix has to be thought of...
- from time to time boot hangs/crashes. In that case, you need to reboot - I don't know how to fix that - seems that surfaceflinger randomly crashes on boot, but it was the case in older releases (cm-10.2), too.
Get it from http://download.cyanogenmod.org/?device=acclaim
Get recovery from here
File: http://goo.im/devs/chrmhoffmann/cm-11.0/acclaim/recovery-20140502.img
md5sum: 0613b47d01400088d09284eb22c5ecc8
Older versions:
File: http://goo.im/devs/chrmhoffmann/cm-11.0/acclaim/recovery-0.2.img
md5sum: e2a87c433171b3d97d852d27aea1ff49
Get it here:
http://goo.im/devs/chrmhoffmann/cm-11.0/acclaim/cm-11-20131213-UNOFFICIAL-acclaim.zip
md5sum 5658cdfa0c043ac28e25d2fbc50d746e
CM 11.0 build 1: http://goo.im/devs/chrmhoffmann/cm-11.0/acclaim//cm-11-20131208-UNOFFICIAL-acclaim.zip
md5sum: c4c251501cc8b6c4ff4b66443230820f
CWM Recovery 6.0.4.5: http://goo.im/devs/chrmhoffmann/cm-11.0/acclaim/recovery.img
md5sum: fe92011742acaa0190f4180f4e7c77ce
Thanks! I'll be downloading this later.
Sent from my Nexus 4 using Tapatalk
Is there any way to flash the new cwm as a zip through the cwm recovery I have now?
Sent from my LG Optimus G using xda app-developers app
Mirror?
hello,
Installing to a bone stock unit
from a CWM 6.0.2.8 SD card
Im getting
"set_metadata_recursive: some changes failed"
"error in /sdcard/CM-11-20131208-UNOFFICIAL-acclaim.zip"
Log shows
ApplyParsedPerms: removexattr of /system/addon.d/50-cm.sh to 0 failed : Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
edit: appears to have installed with no errors thru twrp 2.6.3.1 (as altboot on same sdcard)
thanks for the work !
I am getting constant android.process.media force closes. Only way to get around them was to delete MediaProvider.apk in /system/priv-app. Probably not OK to do this?
Sent from my Galaxy Nexus
this is a great ROM !
----------
for those who like me , really want to have a working flash player in their web browser
this appears to work quite nicely
( forum.xda-developers.com/showthread.php?t=2548001 )
Download Dolphin Browser
Download Dolphin Browser Jetpak
get his modified flash player from that thread.
I turned flash "Always ON" in Dolphin settings
Thanks again to the devs for all their work.
---------------- workaround 2
"unfortunately android.process.media" has stopped keeps popping up for me
Its probably been addressed, but I stopped it for now with no noticeable ill effects yet by disabling the app "media storage"
----------------------
rajsris said:
I am getting constant android.process.media force closes. Only way to get around them was to delete MediaProvider.apk in /system/priv-app. Probably not OK to do this?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
So far, this too is my biggest problem. I can't open Play to install any other apps. WiFi does work though, so hallelujah! I'll try deleting MediaProvider.apk when I get home just so I can install some other apps.
mikeataol said:
this is a great ROM !
----------
for those who like me , really want to have a working flash player in their web browser
this appears to work quite nicely
( forum.xda-developers.com/showthread.php?t=2548001 )
Download Dolphin Browser
Download Dolphin Browser Jetpak
get his modified flash player from that thread.
I turned flash "Always ON" in Dolphin settings
Thanks again to the devs for all their work.
---------------- workaround 2
"unfortunately android.process.media" has stopped keeps popping up for me
Its probably been addressed, but I stopped it for now with no noticeable ill effects yet by disabling the app "media storage"
----------------------
Click to expand...
Click to collapse
Yep, it works OK after that. If you want to change the wallpaper however, you can't do it using a longpress in the home screen, it must be done using settings->display->wallpapers. Even with that, I keep getting Google search force closes when I try to use the stock KitKat wallpapers.
Sent from my Galaxy Nexus
billy8362 said:
Is there any way to flash the new cwm as a zip through the cwm recovery I have now?
Sent from my LG Optimus G using xda app-developers app
Click to expand...
Click to collapse
Ok what I meant was, is there a zip to flash the new cwm to internal emmc??
In addition, MX Player says it is an incorrect android version, which might be related to MediaProvider being deleted.
Sent from my Galaxy Nexus
mikeataol said:
hello,
Installing to a bone stock unit
from a CWM 6.0.2.8 SD card
Im getting
"set_metadata_recursive: some changes failed"
"error in /sdcard/CM-11-20131208-UNOFFICIAL-acclaim.zip"
Log shows
ApplyParsedPerms: removexattr of /system/addon.d/50-cm.sh to 0 failed : Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
edit: appears to have installed with no errors thru twrp 2.6.3.1 (as altboot on same sdcard)
thanks for the work !
Click to expand...
Click to collapse
You need to install new CWM - or some working twrp.
Chris
rajsris said:
In addition, MX Player says it is an incorrect android version, which might be related to MediaProvider being deleted.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I think that is just a problem with the app. Same problem on other tablets.
Chris
billy8362 said:
Is there any way to flash the new cwm as a zip through the cwm recovery I have now?
Sent from my LG Optimus G using xda app-developers app
Click to expand...
Click to collapse
Just install with fastboot....
Chris
billy8362 said:
Is there any way to flash the new cwm as a zip through the cwm recovery I have now?
Sent from my LG Optimus G using xda app-developers app
Click to expand...
Click to collapse
You can install it from a terminal emulator, if you want to.
1. Download the cwm-recovery.img file referenced in the first post of the thread.
2. Copy this file to the internal memory of your Nook Tablet. Rename this file to cwm.img.
3. On your Nook Tablet, launch Android Terminal Emulator (ATE).
4. In ATE, type in 'su' [ENTER]. Grant it access when prompted.
5. In ATE, type in 'cd /emmc' [ENTER]. This will change your file system current directory to /emmc, which corresponds to the internal storage drive.
6. In ATE, type in 'ls' [ENTER]. This will list the contents of the /emmc directory. You should see the cwm.img file you copied over and renamed earlier (step 2).
7. In ATE, type in 'dd if=/emmc/cwm.img of=/dev/block/mmcblk0p3' [ENTER]. This will write the contents of the cwm.img file to partition 3 of device mmcblk0 (internal memory).
You should now be able to reboot and use cwm. CAREFUL, as you could brick your device if you get step 7 wrong.
Nevermind my phone finally did the job
I see process.media crashes a lot. I'll see what I can dish out.
Well I have one solution..disable the Media Storage app in the App section of Settings. That should flush it away..
Sent from my XT907 using xda app-developers app
billy8362 said:
Is there any way to flash the new cwm as a zip through the cwm recovery I have now?
...
Click to expand...
Click to collapse
You can find a flashable cwm zip (e.g.,from Succulent's recovery repo http://goo.im/devs/succulent/acclaim/recovery), then use an archive file manager (e.g., 7-zip) to replace the copy of recovery.img inside that zip archive file with the new recovery version you want (remember to rename it to recovery.img first).
Got ART to work, everything seems to run fine, except for the boot crash that is known about. Is there any plans to move us to emulated storage?
murkurie said:
Got ART to work, everything seems to run fine, except for the boot crash that is known about. Is there any plans to move us to emulated storage?
Click to expand...
Click to collapse
alil confusing.........i thought it was a known issue art in these new 4.4 builds bootloops on ART......atleast thats wut i have been reading and have found out for myself.......how do mind asking did u get it up and running......?
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
#This is a easiest guide to root and to change your stock recovery of Pop C3 4033 WITHOUT using a computer#
Requirement:
1. One-click Root (Framaroot)
Download Source;
https://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Flashify (for root users)
Google Play;
https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en
3. ClockworkMod v5.0.3.3
Google Drive;
https://drive.google.com/file/d/0BzpIeh3-xjl4RlZCbHl2cHh1clU/view?usp=drivesdk
Instruction:
1. Download & install "Framaroot". After install the binary, reboot your phone.
2. Download both file "Flashify.apk" & "CWM.img", install "Flashify.apk", place the "CWM.img" file at "/storage/sdcard0/".
3. Open "Flashify".
4. Click "backup current recovery".
5. On "Flash" tab, click "Recovey image".
6. "Choose a file", then find and click the "CWM.img" file.
7. Click "Yup" and reboot.
8. Congratulation!
Please, touch the 'Thanks' if this guide is work.
Don't forget to mention my name if you want to mirror this guide.
ClockworkMod v5.0.3.3 dead link
Boot Logo Changer - Works for PIE and OREO - No mods needed to my original post
Change the boot image (NOT the bootanimation) that shows BEFORE the boot animation.
22 June 2020: Version 2
Found tar app to be corrupted. Changed tar app and minor mod to install script.
/* Disclaimer */
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this zip file
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
This has only been tested on the Note FE (SM-N935/DS).
If in doubt, check to see if your UP_PARAM partition is /dev/block/sda10.
There are programs on the Play Store that can show the partitions, there names and other info.
This app does make a backup of the original UP_PARAM partition and stores it on your /sdcard as UP_PARAM.bak.
Running this app multiple times will not overwrite the original UP_PARAM.bak
MAKE SURE YOUR SDCARD IS MOUNTED WHEN YOU GET INTO TWRP or CWM.
(Have NOT tested in CWM as I have TWRP installed).
Many thanks to @hanspampel from Android-Hilfe for the original script.
I originally used this for my Tab A 7.0.
To change the logo (.jpg file), replace the logo.jpg in the .zip file with your own .jpg file.
Remember the original Galaxy Note FE (SM-N935/DS) logo.jpg is 1073 x 1464.
DO NOT make the your logo.jpg file too big. I would keep the file size under 250K.
Samsung reduced the size of the logo.jpg file to fill a little over 1/2 the screen. You cannot display anything above the top line in the logo.jpg.
See how I changed my logo.jpg below.
/* Installation */
Steps to install:
- Reboot into recovery
- Select Install from recovery menu
- Select NoteFE-chng-logo.zip
- Follow recovery install prompts
- Reboot and enjoy!
If you need a restore script, use the attached NoteFE-chng-logo-restore.zip
gcrutchr said:
Boot Logo Changer
Change the boot image (NOT the bootanimation) that shows BEFORE the boot animation.
/* Disclaimer */
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this zip file
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
This has only been tested on the Note FE (SM-N935/DS).
If in doubt, check to see if your UP_PARAM partition is /dev/block/sda10.
There are programs on the Play Store that can show the partitions, there names and other info.
This app does make a backup of the original UP_PARAM partition and stores it on your /sdcard as UP_PARAM.bak.
Running this app multiple times will not overwrite the original UP_PARAM.bak
MAKE SURE YOUR SDCARD IS MOUNTED WHEN YOU GET INTO TWRP or CWM.
(Have NOT tested in CWM as I have TWRP installed).
Many thanks to @hanspampel from Android-Hilfe for the original script.
I originally used this for my Tab A 7.0.
To change the logo (.jpg file), replace the logo.jpg in the .zip file with your own .jpg file.
Remember the original Galaxy Note FE (SM-N935/DS) logo.jpg is 1073 x 1464.
DO NOT make the your logo.jpg file too big. I would keep the file size under 250K.
Samsung reduced the size of the logo.jpg file to fill a little over 1/2 the screen. You cannot display anything above the top line in the logo.jpg.
See how I changed my logo.jpg below.
/* Installation */
Steps to install:
- Reboot into recovery
- Select Install from recovery menu
- Select NoteFE-chng-logo.zip
- Follow recovery install prompts
- Reboot and enjoy!
If you need a restore script, use the attached NoteFE-chng-logo-restore.zip
Click to expand...
Click to collapse
you can make picture Heart like box NOTE FE? thanks hehe
Asror said:
you can make picture Heart like box NOTE FE? thanks hehe
Click to expand...
Click to collapse
First of all, please to not copy the entire "LONG" post when replying. Just a couple of lines will suffice.
Secondly, I am not a graphic artist. You would need to find someone versed in graphic design to replicate the Note FE 'Heart'.
Is there any way to change boot logo with adb commands without root privileges for Note FE (N935F)?
mephistooo2 said:
Is there any way to change boot logo with adb commands without root privileges for Note FE (N935F)?
Click to expand...
Click to collapse
You do not need root. You DO need a custom recovery like TWRP or CWM. The installation takes place in recovery.
Check Post #1 for PIE update.
Can you share video tutorial for this mod? I confused
Sent from my SM-N935F using XDA-Developers Legacy app
Asror said:
Can you share video tutorial for this mod? I confused
Sent from my SM-N935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Uh...video tutorial?
This is very simple to use.
1. Download .zip file
2. Replace logo.jpg with your own logo.jpg. Make sure it has same dimensions as sample in .zip file
3. Copy .zip to phone
4. Reboot into recovery
5. Install .zip file
6. Reboot phone
7. Voila!! You have customized boot logo!
gcrutchr said:
Uh...video tutorial?
This is very simple to use.
1. Download .zip file
2. Replace logo.jpg with your own logo.jpg. Make sure it has same dimensions as sample in .zip file
3. Copy .zip to phone
4. Reboot into recovery
5. Install .zip file
6. Reboot phone
7. Voila!! You have customized boot logo!
Click to expand...
Click to collapse
I must rooted my phone? Install from TWRP?
Sent from my SM-N935F using XDA-Developers Legacy app
Asror said:
I must rooted my phone? Install from TWRP?
Sent from my SM-N935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yes
It doesn't work on the note 7.
It doesn't work on note 7
Hi guys MY PHONE GALAXY NOTE FE SM-N935F DS
TWRP INSTALL ZIP BUT MY PHONE SOFT BRICK !!!!
I made my own logo, 200kb in size. And I got the decision right . And did zip with es File Manager. And I loaded it with TWRP, but the device crashed . Why do you think I made a mistake?
Bu damı gelcadı başımıza said:
Hi guys MY PHONE GALAXY NOTE FE SM-N935F DS
TWRP INSTALL ZIP BUT MY PHONE SOFT BRICK !!!!
I made my own logo, 200kb in size. And I got the decision right . And did zip with es File Manager. And I loaded it with TWRP, but the device crashed . Why do you think I made a mistake?
Click to expand...
Click to collapse
Sorry, there is a problem with the internal tar app. I just discovered it today. I will have a fix tomorrow.
gcrutchr said:
Sorry, there is a problem with the internal tar app. I just discovered it today. I will have a fix tomorrow.
Click to expand...
Click to collapse
Files updated...see Post #1
Very good
Works fine on my SM-N935F, Thanks ! :good:
Features.
* Based on official Nougat S228 Release
* Replaced Boot Logo
* Should Works both for (K6 Note) ( K53a48) and K6 Plus K53b36 (K6 Plus not tested).
Requirements:
* Lenovo K6 Note (K53a48) or Lenovo K6 Plus (K53b36)
* Installed Custom Recovery TWRP.
* Time and patience
nstructions
* Download the zip and put it on internal or external sd card( if you have one)
* Boot into TWRP Recovery
* Create Backup of your ROM.
* Select Install zip.
* Choose the zip you downloaded, and wait till the flashing finishes.
* After installation the device will boot and reboot, this is normal.
* Finish the setup and enjoy the phone.
* For Root Flash magisk.zip from recovery
Changelog
google phone , google Messages , pixel lanchur and brigle (https://github.com/amirzaidi/launcher3/releases v3.7) , xmlpak_module_2_7,cm file manejer , vlc player It was added
thank you : adilrenzu ,TechGenius
rom+magisk:https://drive.google.com/drive/folders/1WOimdH3lHrbPxLs3S4l1Z7Fk6ydgFvRM?usp=sharing
Screenshots: https://i.hizliresim.com/RD2oP6.jpg
https://i.hizliresim.com/pnlBWm.jpg
https://i.hizliresim.com/k6mnWA.jpg
Downloads as a bin file not a zip file.
How do you get the zip file?
Sent from my [device_name] using XDA-Developers Legacy app
Sniperboy1 said:
Downloads as a bin file not a zip file.
How do you get the zip file?
Click to expand...
Click to collapse
not correct please check again
pardusx said:
not correct please check again
Click to expand...
Click to collapse
is this rom working fine on k6 note, have any one tested this rom
It works great on k53a48. K6 note
Sent from my [device_name] using XDA-Developers Legacy app