[Q] How the **** do you root this thing? - Xperia Tablet Z Q&A, Help & Troubleshooting

I have a Sony Xperia Tablet Z, 64GB WiFi (SPG312) running stock 4.3, and I can not root this thing. I've tried several different methods to no avail. Does anyone on here know how to root this thing? I'm ultimately trying to install CM11.

Either go back to 4.2, root with Doom's Rootkit, then install a recovery, and install 4.3 already rooted, or unlock your bootloader, install CM kernel, use the recovery built in to install the SuperUser zip, then flash stock kernel again.
Sent from my SGP311 using Tapatalk

Felimenta97 said:
Either go back to 4.2, root with Doom's Rootkit, then install a recovery, and install 4.3 already rooted, or unlock your bootloader, install CM kernel, use the recovery built in to install the SuperUser zip, then flash stock kernel again.
Sent from my SGP311 using Tapatalk
Click to expand...
Click to collapse
So unlock the bootloader? How do I go about that? And after that I can install CM right from there? That sounds like the one thing I haven't tried.
How do I go about doing that?

http://unlockbootloader.sonymobile.com
Follow that link. It's pretty easy. Just make sure you have all the tools in hand. Shouldn't take more than a hour to read everything and do the procedure, if you have everything ready.
It's mentioned there, but remember that it will void your warranty and, with Android 4.3 or lower, on stock ROMs, you will not have Bravia Engine working. Also, in any version, Music and Video Unlimited will not work anymore.
Another big tip: Go to the Xperia Z section (the phone one), and on the sub categories, can enter one called Cross Device Development, or something along those lines, and look for a thread with the name TA backup. If you do the long process, of going back and such, backup your keys. Should come in handy in the future.
Sent from my SGP311 using Tapatalk

Felimenta97 said:
http://unlockbootloader.sonymobile.com
Follow that link. It's pretty easy. Just make sure you have all the tools in hand. Shouldn't take more than a hour to read everything and do the procedure, if you have everything ready.
It's mentioned there, but remember that it will void your warranty and, with Android 4.3 or lower, on stock ROMs, you will not have Bravia Engine working. Also, in any version, Music and Video Unlimited will not work anymore.
Another big tip: Go to the Xperia Z section (the phone one), and on the sub categories, can enter one called Cross Device Development, or something along those lines, and look for a thread with the name TA backup. If you do the long process, of going back and such, backup your keys. Should come in handy in the future.
Sent from my SGP311 using Tapatalk
Click to expand...
Click to collapse
Emma does not work. I have tried to register for an account a several times with no luck.

Birkesuss said:
Emma does not work. I have tried to register for an account a several times with no luck.
Click to expand...
Click to collapse
You do not need Emma.
Sent from my SGP311 using Tapatalk

u need to download flashtool and find a 4.1.2 rom for your device...
then you can either use framaroot 1.91(gandalf exploit) or use doomlords root setup...
after that you can install phill'z recovery...
http://forum.xda-developers.com/showthread.php?t=928343 this link was very help full for my device sgp311 and i think its almost the same for your device only the rom and the stripped .ftf will be different...
unlocking your boatloader is not really applied to you,you only need it if you want to install custom roms...but before you do search a bit around to find hou you can backup your drm keys aka .ta partition.

Make sure you downgrade to 4.2 and root using http://nut.xperia-files.com/?dlid=V...jb3ZlcnkyLjcuMTIzLUJFVEEuaW5zdGFsbGVyLnppcA== option 3 then backup your TA partition before unlocking your bootloader, or theoretically you'll lose warranty

ok ok ok
So what steps do I take to install CM11?
Which method posted would get me there? You guys are saying a lot of different things here, have me a little confused

Hi anyone knows and tries this Kingo to root and unlock bootloader
http://www.kingoapp.com/sony-bootloader-unlock.htm
http://www.kingoapp.com/index.htm
thanks

Unlock bootloader > flash any cm10-11 kernel that has recovery built in > boot to recovery > flash SuperSU > flash 4.4.2 stock kernel back (from FTF)

Related

[Q] Installing CM-10.2 Android-4.3

Hey guys, I've rooted, installed CWM Recovery, Unlocked Bootloader, and installed CyanogenMod on another phone before.
The thing is, I've had this phone for about 6 months and wanted to do the same. However, after browsing through the forums, man are there a lot of scary sh*t going down. I would like the request the procedure to install CyanogenMod safely, without losing any Keys/IMEI/XReality/DRMkeys/Etcetera.
I dont know if the method given by FXP is supposed to be this straight forward, but I too like others, do not want to risk losing important stuff if it can be avoided (Keys/IMEI/XReality/DRMkeys/Etcetera).
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
Click to expand...
Click to collapse
Frankly speaking, the forums is pretty much jumbled up, and the existing [Guide] Threads are either incomplete (Lacking important steps), or Unclear (Non-Specific steps).
Perhaps someone could do me a favour by using the template that I have below to help me, and possibly others, to install CM 10.2 on our beast of a phone.
Template:
1. Backup TA and DRMkeys and stuff: http://forum-xda-developers-com/backup
2. Root: http://forum-xda-developers-com/root
3. Recovery : http://forum-xda-developers-com/recovery
4: Unlock Bootloader: http://forum-xda-developers-com/ulbl
5: Install FXP's CM 10.2 :http://forum.xda-developers.com/showthread.php?t=2461286
Something like that would suffice I think, as long as no important steps are missing that would cause me to lose stuff unique to my phone, that cannot be recovered if I didn't back it up.
P.S. My version is 14.1.B.2.257
P.P.S. Thank you in advance.
1. Root
2. Backup TA (VERY IMPORTANT)
3. Install Recovery and unlock the bootloader, or the other way around. Both ways work.
4. Install ROM by following the "guide" that you quoted above.
Sent from my C6833 using Tapatalk
I'm on 14.1.B.2.257, I believe reverting to the previous version causes data to be lost unless you back it up right. *Sighs* How troublesome.
Xenogenics said:
I'm on 14.1.B.2.257, I believe reverting to the previous version causes data to be lost unless you back it up right. *Sighs* How troublesome.
Click to expand...
Click to collapse
you will have to back up the data anyways. I think unlocking the bootloader does a factory reset, as well one is needed going from stock to CM if i unforget correctly
I am also wondering about this. I'm currently running firmware .257.
I understand that I need to back up the TA partition first (though I'm not exactly sure on what I will loose if I don't). I also understand that to do this I need to root the stock rom. I understand that in order to root, I'll need to first downgrade to an earlier firmware using flashtool. However, after that I'm not so sure what I need to do. As far as I can see, the only method of gaining root currently is to use vRoot, which is currently under investigation for IMEI mining.
How else can I root the device? I was thinking of maybe using the recovery for locked bootloaders here: http://forum.xda-developers.com/showthread.php?t=2426739
Following by flashing SuperSU from recovery as per usual.
Will this work, keeping the TA partition intact so that I can back it up before flashing CM? Assuming so, would I even need to downgrade from the .257 firmware at all?
Thanks,
i have CWM now so can flash custom roms like i did on other phones right?
what does unlocking the bootloader give me? unless i'm wrong and i have to unlock to flash?
all i've done so far is do a backup is all. (did a TA backup a while back though)
stiggy2012 said:
I am also wondering about this. I'm currently running firmware .257.
I understand that I need to back up the TA partition first (though I'm not exactly sure on what I will loose if I don't). I also understand that to do this I need to root the stock rom. I understand that in order to root, I'll need to first downgrade to an earlier firmware using flashtool. However, after that I'm not so sure what I need to do. As far as I can see, the only method of gaining root currently is to use vRoot, which is currently under investigation for IMEI mining.
How else can I root the device? I was thinking of maybe using the recovery for locked bootloaders here: http://forum.xda-developers.com/showthread.php?t=2426739
Following by flashing SuperSU from recovery as per usual.
Will this work, keeping the TA partition intact so that I can back it up before flashing CM? Assuming so, would I even need to downgrade from the .257 firmware at all?
Thanks,
Click to expand...
Click to collapse
OK, so looking into this further, you already need to have root to be able to flash the "CWM for locked bootloader" rocovery. So as far as I can see, the only way to get root in order to back up the TA partition is to give your IMEI to the Chinese via vRoot?
Thank god the stock rom is so good.
tommo123 said:
i have CWM now so can flash custom roms like i did on other phones right?
what does unlocking the bootloader give me? unless i'm wrong and i have to unlock to flash?
all i've done so far is do a backup is all. (did a TA backup a while back though)
Click to expand...
Click to collapse
You have to unlock the bootloader to flash custom ROMs. You can flash stock ROMs without unlocking it, but you have to unlock it if you want CM, PAC, PA etc.
Sent from my C6833 using Tapatalk
really, so what would happen if i tried to flash an aosp rom now? would the system partition essentially be read only?
sorry for the Qs but haven't had a locked bootloader since the htc desire (although the s-off for that one was to remap the partitions to allow more room for data) and the reasons for unlocking don't seem to be the same.
tommo123 said:
really, so what would happen if i tried to flash an aosp rom now? would the system partition essentially be read only?
sorry for the Qs but haven't had a locked bootloader since the htc desire (although the s-off for that one was to remap the partitions to allow more room for data) and the reasons for unlocking don't seem to be the same.
Click to expand...
Click to collapse
Nothing will happen if you try it now. You can easily unlock the bootloader by going to Sony's Dev site, request your key and use Flashtool to unlock it. It takes a couple of minutes once you have Flashtool and the drivers installed. It's also perfectly safe to unlock it and you will lose your warranty. BUT you can easily relock it again if something happens to your ZU and the warrenty will be back.
Remember to backup your TA before you unlock your bootloader. It contains a lot if device info and your unique DRM keys. Unlocking the bootloader will wipe the system partition, but you will still have root, photos, music etc. (But do a backup of those just in case).
Sent from my C6833 using Tapatalk
i think that's where i got confused with drivers - unlocking.
i have already done a backup of my TA part so that side of it is ok. i'll leave unlocking until there's a rom i want to try. possibly a complete 4.4 or something.
cheers LM
tommo123 said:
i think that's where i got confused with drivers - unlocking.
i have already done a backup of my TA part so that side of it is ok. i'll leave unlocking until there's a rom i want to try. possibly a complete 4.4 or something.
cheers LM
Click to expand...
Click to collapse
If you've already backed up your TA, it means that you have the drivers installed, so job done All you have to do is to install Flashtool and get your key from Sony (which you will get on your email straight away). Either way, just ask here if/when you want to unlock it so we can guide you through it (it's very easy though).
ran flashtool but gave me driver errors - missing. unable to install the drivers included (i guess due to windows 8 driver signing)

[Q] Some questions about unlocking the Bootloader and the methods involved....

Hi XDA. I'm an user of a veteran Xperia Play, so now I have some experience with custom roms, kernels, recoverys and such, but not with unlocking bootloaders. I unlocked my XP with the services of this page http://unlock-bootloader.com/, which is paid.
Anyway, the reason for this thread is that my girlfriend has had a Xperia Mini Pro SK17a for like one year. Until now it was fine but it suddenly started to lag and had random reboots, so she asked me to fix it. The idea is to install some rom, but the thing is: which is the most convenient method to unlock the bootloader so I can flash custom kernels on it?
The service menu says "bootloader unlock allowed = yes", so it can be done with:
1. The official method of sony page but DRM get lost and some Sony apps stop working, or
2. Through testpoint with s1tool o setool but then flashing kernels in the original formats .sin and .img is not possible anymore
As I unlocked my xplay with paid method there are none of these problems, but I'm not willing to pay for unlocking another phone that will only be flashed once or twice, so I have some questions about the other methods in order to make a desicion on what to choose :
- With the DRM certificates missing, which apps will no longer work?
- With the method of the sony page, can I flash kernels in .img and .sin format..?
- If I unlock with testpoint with no paid method, the only way to flash kernels is in .ftf format?
- The phone is no more on warranty period. If ever damaged, can I send it to a technician with no problem? (I say this because testpoints are used for repairing as well, and there may be some problem after unlocking by these methods, I suppose)
- Will it be better if I leave the BL locked and just flash a GB rom with stock kernel? My gf is looking for the best possible battery life and stability, so she doesn't care much about performance in games
Finally, what rom and kernel would you recommend me for daily use?? lol (I'm not asking for the "best rom/kernel", it's just that I don't have enough time to properly test battery life on various roms, spending a few days on each, so I'm asking you to please recommend me SOME GOOD ROM, NOT THE BEST ROM).
Sorry for so many questions and thank you all in advance
Anyone here??? Please respond or just answer the poll....
Sent from my SK17a using xda app-developers app
If I were you I'd try the stock gingerbread rom first and if she likes it it's all right
If not, unlock it using the official method. Maybe TrackID won't work any longer, but I guess apps like shazam doing the same work should still be working!
And if you unlock like that you can flash kernels in .img .elf .sin and .ftf (I guess these are the formats), but the same formats should be supported when you unlock using the testpoint method too
To find a good rom, just tell your girlfriend to look through the development threads and if she likes the design of a rom (check screenshots) she can tell you or check the bug list herself, then you flash it and she should be happy :good:
Sent from my Nexus 4 running Android 4.4
Thanks for your answer @mihahn
All this mess was just cause she's on .62 firmware. Since it can't be rooted (I even tried some chinese app called Eroot that is claimed to work on .62 but it didn't) I couldn't install CWM or titanium in order to backup her apps and things before flashing any rom.... and the ovbious solution was to flash a custom kernel and therefore unlocking BL....
She's not a tech fan, but after a lot of explaining and after she saw your answer, she finally decided to check out the devs section ( she's doing it right now ) and hopefully choose a good rom, not just a good-looking one
And again thanks for your answer, it was all she needed
Sent from my R800a using xda app-developers app
julian280 said:
Thanks for your answer @mihahn
All this mess was just cause she's on .62 firmware. Since it can't be rooted (I even tried some chinese app called Eroot that is claimed to work on .62 but it didn't) I couldn't install CWM or titanium in order to backup her apps and things before flashing any rom.... and the ovbious solution was to flash a custom kernel and therefore unlocking BL....
She's not a tech fan, but after a lot of explaining and after she saw your answer, she finally decided to check out the devs section ( she's doing it right now ) and hopefully choose a good rom, not just a good-looking one
And again thanks for your answer, it was all she needed
Sent from my R800a using xda app-developers app
Click to expand...
Click to collapse
Well e-root does work on .62 fw. You might not have follow the steps. Try again with proper steps
Cheers,
AJ
Abhinav2 said:
Well e-root does work on .62 fw. You might not have follow the steps. Try again with proper steps
Cheers,
AJ
Click to expand...
Click to collapse
Well, I tried several times even with various versions of eroot. I think there were the 1.0 and 1.2 but none work.
I dont have here the tutorials I followed but the steps are like this:
1. Open eroot
2. Connect the phone on with mass storage mode on, USB debugging on and unknown sources on.
3. Click on root button
4. Wait for it. It shows its making 4 steps
5. It says its rooted, so you just have to unplug, reboot and enjoy.
But all those is just assumptions of what it says cause I don't speak chinese.... and the text can't be selected in order to copy and translate with google. I also remember sometimes it shows an error-like screen with some red colored "x" marks but I didn't understand either what was that about.
Thanks anyways
Sent from my R800a using xda app-developers app
julian280 said:
Well, I tried several times even with various versions of eroot. I think there were the 1.0 and 1.2 but none work.
I dont have here the tutorials I followed but the steps are like this:
1. Open eroot
2. Connect the phone on with mass storage mode on, USB debugging on and unknown sources on.
3. Click on root button
4. Wait for it. It shows its making 4 steps
5. It says its rooted, so you just have to unplug, reboot and enjoy.
But all those is just assumptions of what it says cause I don't speak chinese.... and the text can't be selected in order to copy and translate with google. I also remember sometimes it shows an error-like screen with some red colored "x" marks but I didn't understand either what was that about.
Thanks anyways
Sent from my R800a using xda app-developers app
Click to expand...
Click to collapse
You can try rooting using the cydia impactor or even the other methods mentioned in my rooting guide for the build number .62. This should help you to gain root access
Sent from my Nexus 4 running Android 4.4
Just to advise - unlocking bootloader removes all user data, so leave it as a last resort after you have backed up your data.

[Q] Some questions from a new owner.

Got my XZU last Saturday and decided today to keep it. Being long out of the Sony-world (last was an XS, now coming from a Find 5), I've got some questions. I'm also going to search for the infos, but I feel a single thread for "my stuff" makes it easier for me, so please be kind.
So, for the current state, here's the device's information.
- Sony Xperia Z Ultra (C6833), black
- running on Vodafone DE
- Android version 4.2.2
- Baseband version 8974-AAAAANAZQ-10220006-09
- Kernel 3.4.0-perf-gde8296d-02194-ga2561a5
- Build 14.1.B.1.510
- The device shows me an update to 14.2.A.1.136
Questions:
1) Do Sony's official updates only update Android + Sony Apps or are there also firmware updates included?
2) I want to root and install a custom ROM, should I start from the current build or should I upgrade to $something first?
3) I've read that KitKat is restricting SDcard usage for non-system apps. Do custom 4.4 ROMs work around this(,yet) or should I update to 4.3 max?
4) I probably won't use the camera much, if at all, still, most custom ROMs can't get the camera quality on a level the stock ROM has, so how bad is it on this device?
5) is the PowerCover CP12 available somewhere in the EU? It's "out of stock" in all big shops I looked at in .de,.at,.ch and the Twitter-Team wasn't really helpful. Ordering from outside the EU would be possible, but pretty much guaranteed to get stuck at the customs where the next office is ~50km away and doesn't have work-friendly times at all.
6) About screen protectors: a) can I apply them over the shatter shield and if so b) will input by pens or something still work on a decent level?
7) is there a prefered solution of recoveries on this device or does it not matter at all, if I'd choose CWM or TWRP(or is there something else entirely)?
8) are there known problems in general with custom ROMs regarding external hardware? I'd like to use my "SmartWireless Headset Pro", my "SmartWatch (1)" and TV-Out
That's it for now, thanks for any help
1) The 136 update is a firmware update (to Android 4.3), but they also push out updates for their Sony apps.
2) You have to update to at least 290 (Android 4.3) if you don't want to lose your IMEI when you flash a custom ROM. Also note that you'll lose your IMEI if you downgrade from 136/290 to anything older. There are no real reasons to downgrade though, but just keep that in mind. It's easily fixable, so it's not the end of the world if you do it.
3) Yes, there's a workaround to get SD card working on KitKat (you just have to replace one file)
4) The camera is still bad on custom ROMs. It might get better with official Sony KitKat.
5) I have no idea.
6) a) Yes. b) Yes.
7) We've got double recovery, meaning you'll get both CWR and TWRP when you flash recovery, so use the one you prefer. (Vol Up for CWR and Vol Down for TWRP)
8) I think the only known issue on 136 is that Bluetooth might be a little wonky, but i'm not sure, so be sure to read around here since there's a thread about it.
Thank you for that.
In regard to 1), I meant firmware updates of hardware, f.e. the Find5 received some updates regarding the touchscreen.
As for 2), so there's currently no reason not to install the latest official Sony update, meaning it's also rootable without too much hassle? What would be the consequences of a lost IMEI?
S.D.Richards said:
Thank you for that.
In regard to 1), I meant firmware updates of hardware, f.e. the Find5 received some updates regarding the touchscreen.
As for 2), so there's currently no reason not to install the latest official Sony update, meaning it's also rootable without too much hassle? What would be the consequences of a lost IMEI?
Click to expand...
Click to collapse
Bugfixes are included in firmware updates, so they don't release an update to fix one minor thing. The Find5 receives updates every two weeks, if i'm not mistaken?
There's really no reason to update to 136 (the newest) if you're going to flash a custom ROM. Rooting is fairly easy if your bootloader is unlocked, and it only takes a couple of minutes, but it's a little more complicated if your bootloader is locked. Luckily, you're on 510, meaning it's even easier to root, and once you've rooted 510, make a backup of your TA partition. It holds all of your unique DRM files that makes X-Reality work etc. You'll lose the TA partition when you unlock the bootloader, so that's why you have to make a backup of it before you unlock it. Once you've done that, update to 290, unlock the bootloader, root it and do whatever you'd like to do.
Thanks again.
Now rooting worked(+OTA keeper from the Playstore), so did creating the TA backup.
Having a glance over the custom ROMs available as of now, I think I'd like to stay on rooted stock until Omni (official) comes around.
So what would be the (better) procedure to get latest Sony ROM running? Use Sony's updater and hope OTA keeper works or unlock, install recovery and flash a pre-rooted FTF?
S.D.Richards said:
Thanks again.
Now rooting worked(+OTA keeper from the Playstore), so did creating the TA backup.
Having a glance over the custom ROMs available as of now, I think I'd like to stay on rooted stock until Omni (official) comes around.
So what would be the (better) procedure to get latest Sony ROM running? Use Sony's updater and hope OTA keeper works or unlock, install recovery and flash a pre-rooted FTF?
Click to expand...
Click to collapse
OTA Root Keeper doesn't work on 4.3, so you'll lose root no matter what you do. Are you still on 510, or have you updated to something else?
You have your TA partition backed up now (recommend you to upload it to your Drive or Dropbox), so you can unlock the bootloader without permanently losing the TA partition. It'll delete it when you unlock the bootloader, but you can easily restore it again in case you have to send it in for repairs. Rooting 290 and everything else becomes so much easier and faster the second your BL is unlocked, so head over to the General section and look for Jackie's root guide and see if that's something you might want to do...
...or you can simply stay with the firmware you're on now, granted it's not the most stable firmware version, but it'll save you a lot of time. Official KitKat is also scheduled for release this month, so you can:
A ) Stay on current firmware and wait for official Sony KitKat
B ) Go all out and flash a custom ROM
I'm currently running the GPe ROM, and I can highly recommend it. It's solid as a rock with no bugs.
Any questions?
Sent from my C6806_GPe using Tapatalk
LordManhattan said:
OTA Root Keeper doesn't work on 4.3, so you'll lose root no matter what you do. Are you still on 510, or have you updated to something else?
Click to expand...
Click to collapse
Still on 510, bedtime was up and I don't wanted to do something stupid with a sleepy head.
You have your TA partition backed up now (recommend you to upload it to your Drive or Dropbox), so you can unlock the bootloader without permanently losing the TA partition.
Click to expand...
Click to collapse
Yes, did that and mirrored it over a few systems. BTW, if I'd ever go back to stock, would the TA-p get changed so I'd need to back it up again or does it stay the way it is over the phone's lifetime?
It'll delete it when you unlock the bootloader, but you can easily restore it again in case you have to send it in for repairs. Rooting 290 and everything else becomes so much easier and faster the second your BL is unlocked, so head over to the General section and look for Jackie's root guide and see if that's something you might want to do...
Click to expand...
Click to collapse
No problem, I had my Xperia S unlocked, so I now the procedure. Only question related to that: I read that for the Z1(?) there's a minimal version one should update to before unlocking the BL, if you don't camera stops working or something - so, is this also a problem on the ZU or has this already been fixed?
I'm currently running the GPe ROM, and I can highly recommend it. It's solid as a rock with no bugs.
Click to expand...
Click to collapse
I'll have a look at it, thanks.
S.D.Richards said:
.
Yes, did that and mirrored it over a few systems. BTW, if I'd ever go back to stock, would the TA-p get changed so I'd need to back it up again or does it stay the way it is over the phone's lifetime?
Click to expand...
Click to collapse
The TA partition is unique to your device, so you do it only once, so be sure to not lose it.
No problem, I had my Xperia S unlocked, so I now the procedure. Only question related to that: I read that for the Z1(?) there's a minimal version one should update to before unlocking the BL, if you don't camera stops working or something - so, is this also a problem on the ZU or has this already been fixed?
Click to expand...
Click to collapse
The ZU has never had any of the camera issues when we unlock the bootloader, so there's nothing to add here
Sent from my C6806_GPe using Tapatalk
So to be clear, when you're talking about the GPe ROM, you're meaning this one: http://forum.xda-developers.com/showthread.php?t=2608708 ?
So if I'd like to try this, I'd need to:
1. unlock bootloader
2. install recovery
3. take NAND backup
4. Flash .290 fw
5. flash this ROM
Correct?
S.D.Richards said:
So to be clear, when you're talking about the GPe ROM, you're meaning this one: http://forum.xda-developers.com/showthread.php?t=2608708 ?
So if I'd like to try this, I'd need to:
1. unlock bootloader
2. install recovery
3. take NAND backup
4. Flash .290 fw
5. flash this ROM
Correct?
Click to expand...
Click to collapse
The bootloader unlocking doesn't need to be the first step since you can flash Recovery on a locked bootloader. You can do everything except the ROM flashing on a locked bootloader. But yeah, that looks fine to me. Be sure to download the tweaked GPe version that includes Recovery and SD fix.
If you can't bother making a NAND:
- Unlock the bootloader
- Update to 290
- Flash boot.img (includes recovery)
- Boot into recovery and flash (VOL UP when LED lights up)
- Done.
Thanks again, could/would you link me to a .290 ftf for germany/europe/generic? The ones I found are either for other regions or the links seem to be down.
Here's 290 EU for the C6833.
https://mega.co.nz/#!VR4HyJia!PGxJXHOi8V-eJpWDnsJKShRPlhoYHR5DpFRkko6m0Nk
Sent from my C6806_GPe using Tapatalk
LordManhattan said:
Here's 290 EU for the C6833.
https://mega.co.nz/#!VR4HyJia!PGxJXHOi8V-eJpWDnsJKShRPlhoYHR5DpFRkko6m0Nk
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
Thanks, already found that link, but it gives me a "the file you are trying to download is no longer available"-error.
Already searched on Google, but couldn't find one, yet, or only for the other models.
Here's the Chilean 290 for C6833. It doesn't matter which one you use, and you're planning to flash the GPe, so just flash this one and get it done
Sent from my C6806_GPe using Tapatalk
Thank you very much for all your help, GPe is up and running smoothly now.
Apart from anything looking pretty huge, guessing different DPI settings compared to Sony's values, it's fine so far. One question though: under display settings it says X-Reality is on. Is that just cosmetics, since at no point I restored the TA-backup. If it's "fake", is it possible to restore TA and have it working or would that "trash" the system and restore should only be done in case of a stock re-install?
S.D.Richards said:
Thank you very much for all your help, GPe is up and running smoothly now.
Apart from anything looking pretty huge, guessing different DPI settings compared to Sony's values, it's fine so far. One question though: under display settings it says X-Reality is on. Is that just cosmetics, since at no point I restored the TA-backup. If it's "fake", is it possible to restore TA and have it working or would that "trash" the system and restore should only be done in case of a stock re-install?
Click to expand...
Click to collapse
just cosmetic and does nothing. If you restored the TA the GPe rom would fail to boot.
blueether said:
just cosmetic and does nothing. If you restored the TA the GPe rom would fail to boot.
Click to expand...
Click to collapse
Thanks for that quick answer, satisfied for now, so I can finally go to sleep
One last thing. Just change ro.sf.lcd_density=400 to 320 in build.prop to get the same sized UI like the Sony ROM. Unless you like 400.
Sent from my C6806_GPe using Tapatalk
LordManhattan said:
One last thing. Just change ro.sf.lcd_density=400 to 320 in build.prop to get the same sized UI like the Sony ROM. Unless you like 400.
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
Perfect, just what I've been looking for, thanks.
Now to hope that the ZU also gets double tap to wake, than I'd be pretty happy.
S.D.Richards said:
Perfect, just what I've been looking for, thanks.
Now to hope that the ZU also gets double tap to wake, than I'd be pretty happy.
Click to expand...
Click to collapse
Yeah, the leaked footage from the Z2 KitKat build shows the option to use double tap to wake, so it looks like we'll get it. It's a kernel feature, so it'll work on mostly anything out there.

[Q] Please help, new to rooting & confused!

Hi all,
Firstly sorry, you must get this all the time and be really bored of helping but i would be so grateful if anyone out there can point me in the right direction.
Firstly my phone details;
Model - Xperia Z2 D6503
Firmware - 1278-4770_23.0.1.a.3.9
Network - EE
Rooting status;
Bootloader unlock allowed: No
I want to root my phone but after reading what seems like thousands of web pages im more than a little confused. Does anyone out there have a step by step guide for beginners?
I want to use cwm recovery but don't understand how to get that on the phone as most guides say use it to back up before doing anything else but it isn't there to start with!
Also will installing cwm wipe my phone and sd card?
Any help would be much appreciated and many thanks in advance.
You can only install nuts dual recovery on a locked bootloader, proper recovery is included in the kernel and the kernel can only be changed on an unlocked bootloader, there was a a guide to rooting in one of the forums and I assume towel root will work, just search the z2 forum you'll find it
Sent from my Xperia Z2 using Tapatalk
Mr.R™ said:
You can only install nuts dual recovery on a locked bootloader, proper recovery is included in the kernel and the kernel can only be changed on an unlocked bootloader, there was a a guide to rooting in one of the forums and I assume towel root will work, just search the z2 forum you'll find it
Sent from my Xperia Z2 using Tapatalk
Click to expand...
Click to collapse
Thanks for the response.
Is nuts recovery better or worse than cwm? Also i thought that towel root would not work with 4.4.4 at present?
Does the locked bootloader mean i cannot do certain things even after rooting my phone like install custom roms and kernals?
Many thanks
Faggy said:
Hi all,
Firstly sorry, you must get this all the time and be really bored of helping but i would be so grateful if anyone out there can point me in the right direction.
Firstly my phone details;
Model - Xperia Z2 D6503
Firmware - 1278-4770_23.0.1.a.3.9
Network - EE
Rooting status;
Bootloader unlock allowed: No
I want to root my phone but after reading what seems like thousands of web pages im more than a little confused. Does anyone out there have a step by step guide for beginners?
I want to use cwm recovery but don't understand how to get that on the phone as most guides say use it to back up before doing anything else but it isn't there to start with!
Also will installing cwm wipe my phone and sd card?
Any help would be much appreciated and many thanks in advance.
Click to expand...
Click to collapse
Faggy said:
Thanks for the response.
Is nuts recovery better or worse than cwm? Also i thought that towel root would not work with 4.4.4 at present?
Does the locked bootloader mean i cannot do certain things even after rooting my phone like install custom roms and kernals?
Many thanks
Click to expand...
Click to collapse
1) You cannot root the firmware you are on with a one click tool (like towelroot) at present. You have to downgrade to a lower firmware like 17.1.2.A.0.314 first and then root that, install a custom recovery and install a pre-rooted firmware package.
2) Your bootloader is hard locked by EE, this means that you will never be able to unlock it and install custom kernels nor custom ROM's what require custom kernels.
3) It is more than recommended to install [NUT]'s dual recovery, this installs PhilZ recovery (a more advanced CWM in my opinion), TWRP and CWM (to use CWM you have to install dual recovery manager from google play AFTER installing the dual recovery).
4) Now to downgrading, you will need to download a program called flashtool (this can be found in the Sony Cross Device development section) and the .314 ftf file (not .tft, ,ttf, .fft or any other variation people mis-spell it as). You will then need to install the drivers for your phone (these can be found in the flashtool drivers folder in the location you installed it, also if you have Windows 8 or 8.1 check my signature on how to disable driver enforcement before attempting to install the drivers.) There are plenty of guides on how to downgrade, there is even one in the firmware collection thread what can be found in the Z2 general section. Side note, when downgrading you will HAVE to wipe data and the cache (this can be selected when you are selecting the firmware to flash) or else you will end up with a phone what is in a bootloop.
5) After downgrading you will need to root, the easiest and simplest way to root would to be use the easy root toolkit (this can be found in the Sony Cross Device development section).
6) After rooting you will have to install [NUT]'s dual recovery (Sony Cross Device development section, you will need the installer file and not the flashable file).
7) After installing dual recovery you will need to flash a pre-rooted zip file of the latest update (Z2 Android Development section, I think the one by @niaboc79 is the best one to use). Alternatively you could install a custom ROM what is based on stock, it will tell you if it is.
If you need any more help, just tag me in the post (by using the @ symbol and then my user name) or PM me. Also, @Envious_Data is a great help in this device forum, helped me when I had a few queries about the phone before I got it and I have seen them help a load of people in the Q&A section.
@gamer649 Thank you for taking the time to help me, that has explained everything perfectly. I do however have a couple more questions i think you'll know about....
1 - Is there a back up app available that will do a similar back up to that of "apple". I mean reinstall all the apps i currently have and keep the home screen layouts and all data etc?
2 - In the link to the firmware downloads you gave me there is only 2 UK .314 ones and none of them are EE, shiuld i just use the unbranded one and what are the differences?
3 - The main reason i started looking into rooting was that i heard about a tweak to increase the volume of the z2 notifications by forcing it to use both speakers. Have you had any expierience with it and what other tweaks would you recomend?
Thanks again and i look forward to hearing from you again
Faggy said:
@gamer649 Thank you for taking the time to help me, that has explained everything perfectly. I do however have a couple more questions i think you'll know about....
1 - Is there a back up app available that will do a similar back up to that of "apple". I mean reinstall all the apps i currently have and keep the home screen layouts and all data etc?
2 - In the link to the firmware downloads you gave me there is only 2 UK .314 ones and none of them are EE, shiuld i just use the unbranded one and what are the differences?
3 - The main reason i started looking into rooting was that i heard about a tweak to increase the volume of the z2 notifications by forcing it to use both speakers. Have you had any expierience with it and what other tweaks would you recomend?
Thanks again and i look forward to hearing from you again
Click to expand...
Click to collapse
1) You could try using the stock back up and restore app for that. Also, if you have your data backed up with your Google account it will start to reinstall all your apps along with their data once you sign in once you downgrade. @Envious_Data any other suggestions for a non-rooted device?
2) I always go for unbranded software, the reason being that there are no carrier apps nor carrier boot logos installed into the ROM and it is how Sony intended it to be. Apart from that I don't think there are any differences.
3) I don't usually have my phone on sound mode, it is either silent or vibrate so I can't help you with that one. You could take a look in the Z2 android development section to see what mods are available, some ROM's may also include this feature.
gamer649 said:
1) You could try using the stock back up and restore app for that. Also, if you have your data backed up with your Google account it will start to reinstall all your apps along with their data once you sign in once you downgrade. Envious_Data any other suggestions for a non-rooted device?
2) I always go for unbranded software, the reason being that there are no carrier apps nor carrier boot logos installed into the ROM and it is how Sony intended it to be. Apart from that I dont think there are any differences.
3) I dont usually have my phone on sound mode, it is either silent or vibrate so I cant help you with that one. You could take a look in the Z2 android development section to see what mods are available, some ROMs may also include this feature.
Click to expand...
Click to collapse
1. You can use root to copy all of your apps from /data/app and you can use flashtool to bulk install all of them
2. Branded firmwares occasionaly have some small changes for better reception on the selcted network but with 314 this doesnt actualy matter
3. Have a look around for some mods, and see if they are compatible with your current firmware version

[Q] Getting back to stock for Lollipop update

I gave my XZU, which has an unlocked bootloader, is rooted, and is running 4.4.2 to my mother. I want to return the device to stock, as she has no need for root, and upgrade it to stock lollipop. The problem is, I rooted it a long time ago, I don't remember how I did it, and even then, I was stumbling through the process. There are many more guides about rooting than there are about unrooting, so I'm concerned that I may brick the phone or mess it up in some way. Here are the steps I found on XDA for returning to stock:
1. Make sure you have root
2. Backup any data/photos/etc on the phone
3. Restore your TA backup with the TA backup tool above
--------If you are on a custom kernel or ROM you ZU will not boot at this stage
4. Start flashtool and load a FTF
5. Start the flash and wait for the onscreen instructions to connect the ZU
6. Connect your ZU in flashmode
---------With the ZU powered off
---------Connect to PC while holding the volume down key
---------Flash will start
7. Wait for flash to complete
Is this the appropriate way to approach what I'm trying to do here? I am not running a custom kernel or ROM, I don't think. Certainly not a custom rom, though I'm not sure how kernels work anymore. But I'm pretty sure it's not custom. Just to be certain I am doing this properly, I want to write this out with the guide and see if it makes sense.
1. I do have root.
2. Done.
3. I have my TA partition saved as a .zip from when I originally rooted the phone. I'm not completely sure how I restore the partition. I am getting the Backup TA program from here: https://github.com/DevShaft/Backup-TA/releases. But I can't find actually how to restore it. After I do this, my bootloader is now relocked, and then I can just flash stock .ftf's? Is this correct?
4. I am downloading flashtool from here: http://www.flashtool.net/downloads.php and I am using this .ftf: [STOCK ROM] [FTF] Xperia Z Ultra (C6806) 14.3.A.0.681 "US Unbranded", which I am getting from here: http://forum.xda-developers.com/xpe...tf-depository-sony-firmware-releases-t2829387. I haven't used the flashtool since the original rooting I did, but I think I can figure it out.
5. Etc.
6. Etc.
7. Etc.
At this point, I should be back on stock, right? And then I could just update through Sony's PC Companion at this point, yes? I'm basically just looking for a "Yes, you're going in the right direction" or "Yes, this is how you would return the device to stock."
Thanks!
That is the most up to date instructions that I know of, sorry I can't answer about the TA restore. Just one suggestion would be to flash a lollipop ftf, rather than kitkat and trying to get it to upgrade. An even easier solution would be to leave it unlocked and flash this http://forum.xda-developers.com/xpe...llipop-5-0-2-c6806-14-5-0-242-rooted-t3082449 in recovery.
adfurgerson said:
That is the most up to date instructions that I know of, sorry I can't answer about the TA restore. Just one suggestion would be to flash a lollipop ftf, rather than kitkat and trying to get it to upgrade. An even easier solution would be to leave it unlocked and flash this http://forum.xda-developers.com/xpe...llipop-5-0-2-c6806-14-5-0-242-rooted-t3082449 in recovery.
Click to expand...
Click to collapse
I appreciate it. I think I'm going to try it now. I really want it on stock for any updates. It needs to stay as simple and as up-to-date as possible without as little effort as possible. Do you know where the stock lollipop .ftf's are?
Snarging said:
I appreciate it. I think I'm going to try it now. I really want it on stock for any updates. It needs to stay as simple and as up-to-date as possible without as little effort as possible. Do you know where the stock lollipop .ftf's are?
Click to expand...
Click to collapse
This tool might work.
http://forum.xda-developers.com/cro...xperifirm-xperia-firmware-downloader-t2834142

Categories

Resources