Hi all,
I'm trying to restore dead chinese phone still recognized by SP Flash TOOLS and some roms downloaded from needrom but all attemps with same result:
BDROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
Someone has the correct ROM and PRELOADER for this phone or has a solution for this error?. Even doing Memorytest from SP Flash tools I have same result. Only I know about the model is H1, searching I see this phone is equal than Star H1 and Hightouch H1. But I don't find any rom for these models. Anyone with same who can help me?
Thanks in advance guys!
Related
Hi, xda forum!
I recently fullbricked my Neken N5 while flashing the wrong ROM...
Now I get the error:
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!
So I did some research around in the xda-forum and found this solution:
http://forum.xda-developers.com/show...&postcount=284
There is no way to unbrick fullbricked devices with downloaded "original" ROMs.
The Factory-ROM has to be extracted right from an original device, the Neken N5 MTK6589 in my case. (No custom roms or firmwares!)
So I'm asking you for help.
Would someone please upload/extract his or her ROM for me, so I can unbrick my device? (via Flashtool)
The instruction for uploading the original ROM can be found in this .pdf document!
Manual for extracting original ROM
please help me......
Thanks in advance
Irom
I bricked my phone
Is Alps i9200 with mtk6572.
Now with sp flash i have:
S_FT_ENABLE_DRAM_FAIL
And I can't flash any firmware.
I try to search firmware but no results (every rom have lcd issue)
What to do with it?
dzi0bas said:
I bricked my phone
Is Alps i9200 with mtk6572.
Now with sp flash i have:
S_FT_ENABLE_DRAM_FAIL
And I can't flash any firmware.
I try to search firmware but no results (every rom have lcd issue)
What to do with it?
Click to expand...
Click to collapse
just go to needrom.com and try ALPS GT-I9200 and this attached (scatter) in sp flash tool SP_Flash_Tool_v3.1320.0.174
in this you just worked out your phone back and try again and again in the flash tool...without battery
same problem here, I am searched through all the websites but no luck to find a proper ROM for my i9200 MT6572.
The ALPS which provided by needrom.com was stucked in the language selection and the touch screen is not working after I flashed into it.
BRICKED MTK 6572 9 INCH TABLET
pls help My phone is dead after
I tried flashing an incompatible rom/preloader(without knowing) on my tablet and now its bricked,
I get Enable DRAM FAILED for each trial in flashing different preloader.
This was purchased on aliexpress, tried contacting seller but no response.
But I beleive there could still be hope for my device
model: H902
Build number: ALPS.JB3.MP.V1
BASEBAND: MOLY.WR8.W1315.MD.WG.MP.V1
I really appreciate anyone help
4jean said:
BRICKED MTK 6572 9 INCH TABLET
pls help My phone is dead after
I tried flashing an incompatible rom/preloader(without knowing) on my tablet and now its bricked,
I get Enable DRAM FAILED for each trial in flashing different preloader.
This was purchased on aliexpress, tried contacting seller but no response.
But I beleive there could still be hope for my device
model: H902
Build number: ALPS.JB3.MP.V1
BASEBAND: MOLY.WR8.W1315.MD.WG.MP.V1
I really appreciate anyone help
Click to expand...
Click to collapse
why not try flashing the stock backup using Sp flash tool
Hovatek said:
why not try flashing the stock backup using Sp flash tool
Click to expand...
Click to collapse
dont have the backup. this is the link
aliexpress. com/snapshot/6305046788.html?orderId=64289939825428
hi was not sure were to post this but ive bought a cubot x9 and like a idiot i tried flashing a ported lollipop rom and bricked my phone now why trying to flash back to stock im getting brom error s_da_sdmmc write failed 3153ive tried every single rom for the cubot on needrom and get same error each time any ideas what it could be
which rom u use?
try to visit us here cubotx.com
Dear Sir,
I have a Iphone clone 6s A1688 model but its in not working condition because of I'm flasing with SP flash tool with wrong Stock Rom. I don't know what is exact stock Rom For my Iphone Clone 6s A1688.
from more days I'm searching on Internet but not exact stock ROM not found. when I'm flash with Sp flash tool. get error abut
BROM error. what is the solution plz help me. I'm so panic I don't know wheres from got me the stock rom for my model.
my Phone is connecting with PC detect mtk device with prebootloader. also installed Driver. plz help me.
my phone is on dead condition.
when I was disassemble my phone I found on MotherBOARD...like this no.E165x MB v2.0.
E165x MB V2.0..
Plz help me sir..& solve my problem.
Thanks & Regards,
VIKRANT