[SCRIPTS] NADIA KERNEL v1.1 - Galaxy Note II Original Android Development

WARNING! DO NOT DOWNLOAD THIS SCRIPTS IF YOU ARE USING NADIA R3, BECAUSE YOUR PHONE GET FROZEN. OR IF YOU WANT IT DO IT BUT DELETE QUICKLY "A2_VOLTAGES". I NEED TO READJUST THE VOLTAGES FOR THIS NEW REALEASE, BECAUSE THE UNDERVOLTING I MADE BEFORE WAS WORKING FLAWLESLY TILL "BETA R3". NOW I NEED TO RE-ADJUST THE VOLTAGES. SORRY MATES!
Hi guys I made a Flashable zip containing 2 scripts for Nadia Kernel. I made it for personal use, taking the sources from: Mat9v Scripts Thread Info, How to, and more... and I'm sharing it with you in case someone want to try it!
Scripts:
A1_NadiaCFG -> Contains System Tweaked I/O, Increased Battery Chargerate (max supported), Internet tweaks, Disabled sleepers, GPU & CPU config, Governor Lulzactiveq Tweaked, Added some Sound configs in v1.1
A2_Voltages -> Contains UV section for GPU and CPU, including MIF e INT uv. Reomved in v1.1 because it lags
In addition this flashable zip removes the scripts below from Nadia kernel, to don't make any issue:
"01freq"
"91iotweaks"
"81GPU_rendering" (this option is also available in Settings-> Developer Options if you want it back)
V1.1:
"A1_NadiaCFG"[ previous versions]----v
"A2_Voltages" [previous versions]---->you don't need another zip file, this is just an all in one zip package, delete previous versions install new ones :highfive:
Click to expand...
Click to collapse
Versions:
1-CPU freqs: Min: 200mhz -> Max: 1600mhz (for daily usage, and incredibly battery long last!)
GPU max freq 533mhz (without OC but with UV)
2-CPU freqs: Min: 200mhz -> Max: 1600mhz (for daily usage, and incredibly battery long last! with a little more gpu performance)
GPU max freq 666mhz (with OC & UV)
3-CPU freqs: Min: 200mhz -> Max: 1800mhz (with a little overclock and good UV)
GPU max freq 533mhz (the same here without OC but with UV)
4-CPU freqs: Min: 200mhz -> Max: 1800mhz (with a little overclck and good UV)
GPU max freq 666mhz (with OC and UV)
5-CPU freqs: Min: 200mhz -> Max: 1920mhz (upper overclock and good UV)
GPU max freq 533mhz
6-CPU freqs: Min: 200mhz -> Max: 1920mhz (upper overclock and good UV)
GPU max freq 666mhz (OC and UV gpu)
I THINK THAT MORE OVERCLOCKING FROM CPU OR GPU IS A WASTE OF TIME, WITH THIS VALUES WE CAN PLAY FAIR AND ENOUGHT.
Click to expand...
Click to collapse
My scripts were made mixing the scripts from Nadia Kernel + info from the thread: Mat9v Scripts Thread Info How to and more...
AS I SAID BEFORE THIS WAS MADE FOR MY PERSONAL USAGE, SO I'M SHARING THIS WITH YOU!
All I made was mix things, and just include the things that are working on this kernel from mat9v scripts. I know and understand what I made.
CLEARED!
Click to expand...
Click to collapse
HOW TO MAKE IT WORK?​
1)Download "Universal Init.d" From playstore this is REALLY HELPFULL! (set root permissions and everything is ok)
2)Just flash it as a normal zip.
3)Clear data from Trickster Mod and (if you have installed SetCPU) clear data from SetCPU. Try to not check "set on boot" option after finish all the process, you already have the script for that.
4)Once you have cleared data from one/both apps, enter to Universal Init.d app. Tap over the script "A1_NadiaCFG" then at the right top of the screen app you see 3 icons (a Trash Case Icon-to erase scripts-, a Pen Icon -this is if you want to edit the script- and finally a Play Icon-to start running the script-) FIRST TAP DE PEN ICON AND THEN TAP SAVE (this is the same step for both A1 and A2) AFTER THAT Tap the Play Icon wait till everything is done. It generally takes a minute so so. (You notice that when The upper label on the app has gone) Then Tap over "A2_Volatges" and do the same you did before on "A1_NadiaCFG" Script.
5) Once you made all that, enter into Trickster Mod app (and SetCPU if you have it), and you see the new values installed. Remeber to don't check set on boot option, because it may cause some issues with the scripts.
Click to expand...
Click to collapse
THAT'S ALL FOLKS lol!
Have fun and enjoy everything from this awesome kernel which is just starting
PS: Notice that some values are not being recognized exactly in the Trickster Mod and SetCPU App.
PS2: This Script has the UV enought to performing heavy apps and for daily usage.
HOPE YOU REALLY ENJOY IT!
PLEASE IF YOU LIKE MY WORK, DONATIONS ARE WELCOME TO KEEP WORKING. THANKS!
​

---

In a couple of minutes, I upload the v1.1 of this kernel!

---

Hey, script looks nice.. V1.1?

---

owais0903 said:
Hey, script looks nice.. V1.1?
Click to expand...
Click to collapse
Sorry today I update the script. Yesterday I fall asleep lol After some testings I realize about something. Did you feel some lag or s9mething like that? I found the issue of it, so today I fix it.

---

Hello,
When can we expect v1.1 to give a try ??
Thanks in advance and very nice work.

---

futchy4u said:
Hello,
When can we expect v1.1 to give a try ??
Thanks in advance and very nice work.
Click to expand...
Click to collapse
Right now I'm working on it. I just took my breakfast, so hands on work now lol.

---

Austtin said:
Right now I'm working on it. I just took my breakfast, so hands on work now lol.
Click to expand...
Click to collapse
No No,
When it comes to breakfast everything can wait
Take your time bro, and best of luck :good: :highfive:
I just want to ask about something, I installed the old version 1.0, when I open trickster, I think nothing changes, but when I run the script things change (I'm testing it using the UV values) is there something wrong ? or this is how it should work ??
I'm using a kernel that supports init.d already and I'm sure about that because the Swap SD script is working already .
Now, finish your breakfast and reply later

---

futchy4u said:
No No,
When it comes to breakfast everything can wait
Take your time bro, and best of luck :good: :highfive:
I just want to ask about something, I installed the old version 1.0, when I open trickster, I think nothing changes, but when I run the script things change (I'm testing it using the UV values) is there something wrong ? or this is how it should work ??
I'm using a kernel that supports init.d already and I'm sure about that because the Swap SD script is working already .
Now, finish your breakfast and reply later
Click to expand...
Click to collapse
Mmm Universal init.d is usefull not only to activate init.d if not as a script manager. I always use it. That's why I recommended to use it.
edit: please follow the step by step guide so this way Everything is going ok. If not the trickster mod or SetCPU are not showing the right values. Thanks

---

Updated!
01--06--2014
Thread UPDATED! Enjoy it!
Edit: version 1.2 is coming soon. I'm still testing the scripts on my phone. So I think I found something in scripts version 1800mhz and above, that need some fix, as I said I think not sure. The 2 versions of 1600mhz seems to work flawlesly!

---

Thanks for contributing.
In the new release r3 (Rigth now I´m updating the thread) and I added two new scripts in init.d for the GPU OC and uV. If you want update your updater-script to delete this two scripts.
Regards.

---

Pafcholini said:
Thanks for contributing.
In the new release r3 (Rigth now I´m updating the thread) and I added two new scripts in init.d for the GPU OC and uV. If you want update your updater-script to delete this two scripts.
Regards.
Click to expand...
Click to collapse
Oh, thanks Pafcholini. First I look what you've done before I do anything. It started just like as a script for my personal using, then I think just to share it with others, and here we are now lol. Nadia kernel is awesome!
Edit: recien revise la release 3 del kernel, y vi los nuevos scripts, pafcholini fijate que el gpu esta en 533mhz, esta normal. overclockeado seria freqs mayores a 533mhz. Primero voy a probar el nuevo kernel, y despues voy a ajustar un par de cosas. No quiero que te enojes conmigo ni nada por el estilo, tampoco quiero que sientas que te estoy robando trabajo o algo, el esfuerzo es todo de ustedes, simplemente empezo como algo personal para mi propio cel y despues quise compartirlo, y ahora ya que estamos me gusta la idea de cooperar. Nadia es un buen kernel, que esta recien empezando. Saludos desde Argentina

---

Austtin said:
Oh, thanks Pafcholini. First I look what you've done before I do anything. It started just like as a script for my personal using, then I think just to share it with others, and here we are now lol. Nadia kernel is awesome!
Edit: recien revise la release 3 del kernel, y vi los nuevos scripts, pafcholini fijate que el gpu esta en 533mhz, esta normal. overclockeado seria freqs mayores a 533mhz. Primero voy a probar el nuevo kernel, y despues voy a ajustar un par de cosas. No quiero que te enojes conmigo ni nada por el estilo, tampoco quiero que sientas que te estoy robando trabajo o algo, el esfuerzo es todo de ustedes, simplemente empezo como algo personal para mi propio cel y despues quise compartirlo, y ahora ya que estamos me gusta la idea de cooperar. Nadia es un buen kernel, que esta recien empezando. Saludos desde Argentina
Click to expand...
Click to collapse
No update on this??
Sent from my SM-G900F using XDA Premium 4 mobile app

---

NickVXD said:
No update on this??
Sent from my SM-G900F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Update is coming soon, please be patient. Today I have an exam!!! OMGGG jaja. Later I make an update for more stability reason! sorry guys

---

@Austtin Thanks for your efforts and time.
Sent from my GT-N7100 using Tapatalk

---

aukhan said:
@Austtin Thanks for your efforts and time.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
<3 Thanks you aukhan, I always wanted to contribute with something. It makes me feel good
In a while I update this thread and the scripts. Thanks all <3<3<3
edit: I try your rom Emotion, it looks really good. I really like new things to try. I love the phone, tablet, phablet mod. So gonna see how it looks. Always was on ditto or phoenix rom, actually I'm on phoenix v18.8 now, but I want to try emotion rom.