Related
Mika Dee said:
Hi farhan can you please guide me how to install supercharger on nAa ICS? Thanks
Click to expand...
Click to collapse
Yeah sure
PLEASE READ EVERYTHING CAREFULLY BEFORE ASKING QUESTIONS
All Credits go to zeppelinrox for his magnificent script
*1st go look at this thread and the 2nd post: Original thread & 2nd post
*Follow these steps to Patch your service.jar file for OOM Priority change:
1. via root browser go to /system/framework/
2. copy the services.jar to the sdcard and then copy it to ur PC
3. go here http://android.mimic.ca/
4. upload ur services.jar file
5. a new page will appear... select the CWM flashable zip and download..
6. copy the zip to sd card and read below
**Patched "services.jar" CWM Flashable Zip for MiniCM9-3.0.2 available for download. See attachments
Download supercharger from the link at the end and save this in the root of your SD card.
zeppelinrox said:
IMPORTANT....Note: You will probably get Segmentation Fault errors running the V6 SuperCharger script on ICS due to some funky stuff going on with the su (superuser) binary. Go HERE for a fixed su binary. No more fugly segfaults! - Thanks to wraithdu
Click to expand...
Click to collapse
Now follow this steps:
0. Download Script manager from the market.
1. Run the script via Script manager as ROOT
2. Recommended Options for RAM management 256HP--> Ledded(3), Unledded(2), Super Unledded(4)
3. Recommended Options for LAG kIlling: Engine Flash(18), Detailing databases(19)
For SOME reason U cant run script manager.... THEN LETS IMPROVISE:
0. via file manager find the supercharger script file and copy the whole name (with extension)
1. go to terminal emulator
2. write:
Code:
su
{press enter}
3. write:
Code:
cd /sdcard/
{press enter}
4. write:
Code:
sh V6_SuperCharger_for_Android-Update9_RC7.sh.pdf
[u have pasted the name]{press enter}
NOW:
# After applying RAM minfree values you'll be asked to Wipe delvik cache and reboot. and YES u need that...
# U said YES ... Now your delvik cache is wiped and it rebooted.
# ITS TIME TO MAKE UR LAUNCHER DIE-HARD! So Enter CWM Recovery and Flash the previously prepaired zip. REBOOT.
# This time it will take some time to boot as Delvik cache has been wiped and has to be rebuild.
NOW Dealing with Stickiness of your applied Minfree values:IMPORTANT
#Run the Script again.
#U will see that it says about a percentage of supercahged-ness...
#If ur applied minfree values has not sticked a file will open which will say what to do to make these values fixed.
{For this u'll need script manager}
0. open script manager
1. go to /system/etc/init.d/
2. u'll see a file named "99supercharge" click on it...
3. give it the permission for ROOT and RUN AT BOOT and run.
4. script manager will run at every boot and fix ur minfree values.
WARNING: IF Script manager Can Not Run at boot for some reason minfree values will not be applied.
LAG KILLING:
Two options i use to kill lag. : 1. Engine Flush (18)
2. Detailing A.K.A Vaccuming (19)
# If u Run these from the main script a terminal emulator shortcut will be created
# after days of use if u feel choppy and laggy u can apply them via terminal emulator
Detailing/Vaccuming:
[info: this will re-index ur databases to make ur phone faster]
Open terminal emulator
Code:
su
{press enter}
Code:
vac
{press enter}
DONE!!
Engine Flush:
Open terminal emulator
Code:
su
{press enter}
Code:
flush
{press enter}
DONE!!!
Enjoy it... like a boss!
zeppelinrox said:
Updated April 10, 2012: - V6 SuperCharger Update 9 RC8.2
.................................... - Fixed - Bug when trying to apply calculated values automatically on rookies' first run - it would just loop back to menu
.................................... - Fixed - Bug regarding fix emissions option when resupercharging.
.................................... - Fixed - Bug regarding the installation marker in build.prop.unsuper.
.................................... - Improved - Has proper rounding of decimals instead of just truncating them. This was a royal pain in the ass.
.................................... - Enhanced - User prompts. No more confusion regarding the "applet not found" note
.................................... - Tweaked - Method by which /init.d/*97BulletProof_Apps is launched.
.................................... - Tweaked - Code a bit
Updated April 03, 2012: - V6 SuperCharger Update 9 RC8.1
.................................... - Fixed - Bug where the script appied all 0s for the minfrees
.................................... - Fixed - Bug where the script would crash when supercharging current minfrees that had a decimal value (ie. 32.532 MB was bad)
Updated April 02, 2012: - V6 SuperCharger Update 9 RC8
.................................... - Added - Fix Emissions Script! (Fix Permissions)
.................................... - Added - Option to run Fix Emissions on boot! (Does NOT slow down boot time!)
.................................... - Removed - Market links to BusyBox Installer (suddenly half assed busybox builds are running rampant ;p)
.................................... - Added - Link to my OP to get BusyBox builds compiled by wraithdu instead (So There! smali ass busybox builds!)
.................................... - Added - Automatic direction to use calculated values for Rookies! (after selecting Driver Options)
.................................... - Added - Support for a couple of more launchers
.................................... - Tweaked - Delay time in *97BulletProof_Apps - reduced to 30 seconds from 60 seconds. Shouldn't effect battery life since it still goes to deep sleep as it always does.
.................................... - Tweaked - Method by which /init.d/*97BulletProof_Apps is launched.
.................................... - Tweaked - Interface and user prompts.
.................................... - Changed - "Help File" to "Owner's Guide"
.................................... - Removed - Most DNS Tweaks (too many weird connection issues started happening)
.................................... - Tweaked - net.tcp.buffersize.* settings
.................................... - Changed - "Market" to "Google Play"
Click to expand...
Click to collapse
Downloads:
Mirrors are discoraged
V6 supercharger Updates (the latest are at the last of the post)
This thread will be updated with each update of of the original thread
THIS IS EXACTLY WHAT IM WAITING FROM YOU ![Coz im read at Minicm9 thread you Talking About this] LOL
Thanks dude, [Thanks overlimit, Hit Soon ]
Shimizux said:
THIS IS EXACTLY WHAT IM WAITING FROM YOU ![Coz im read at Minicm9 thread you Talking About this] LOL
Thanks dude, [Thanks overlimit, Hit Soon ]
Click to expand...
Click to collapse
no prob. dude! enjoy!
Cannot download the attached .pdf file.
Dude,
IF, I change, flash a new rom [ICS ROM]
Do i need Upload my service.jar again?
Or i can use same service.jar file and Just Flash via CWM in New Costum ICS Rom ? Just in case.
virajt said:
Cannot download the attached .pdf file.
Click to expand...
Click to collapse
Yep, Failed to Load PDF Document.
why it is in .pdf not .sh?
can you also upload the patch service.jar you used in nAa ICS.
Thanks
working on it... i can download the files btw!
and its in .sh.pdf
it is recognized as script anyway!
Shimizux said:
Dude,
IF, I change, flash a new rom [ICS ROM]
Do i need Upload my service.jar again?
Or i can use same service.jar file and Just Flash via CWM in New Costum ICS Rom ? Just in case.
Yep, Failed to Load PDF Document.
Click to expand...
Click to collapse
yes u hav to patch it again...
mediafire mirror updated!
Dude,
I run Script with Terminal Emulator,
But it Always Need for me to choose Option [1-30]
Idk, What option should i choose,
Then yeah i choose option 30,
Some Command appear,
And "Buh Bye :")"
LOL! No Command for to Wipe Dalvik Cache. =.=
Shimizux said:
Dude,
I run Script with Terminal Emulator,
But it Always Need for me to choose Option [1-30]
Idk, What option should i choose,
Then yeah i choose option 30,
Some Command appear,
And "Buh Bye :")"
LOL! No Command for to Wipe Dalvik Cache. =.=
Click to expand...
Click to collapse
that command is "super clean" on the list. "29"
and i've written the options recommended in OP with number!
farhanzahinfj said:
that command is "super clean" on the list. "29"
and i've written the options recommended in OP with number!
Click to expand...
Click to collapse
Then i Should Run Script Again,
Thanks.
Edit : Should i choose unleaded? or choose 3 of them?
to download just right click on the first link and save as option.
Trying
Shimizux said:
Then i Should Run Script Again,
Thanks.
Edit : Should i choose unleaded? or choose 3 of them?
Click to expand...
Click to collapse
Only one will work... its like 3 options one answer... chose super unledded for more free memory... read the things the script is saying... u'll understand!
Sent from my E15i using XDA
farhanzahinfj said:
Only one will work... its like 3 options one answer... chose super unledded for more free memory... read the things the script is saying... u'll understand!
Sent from my E15i using XDA
Click to expand...
Click to collapse
Yezza ! i already choose Option 4
Works great !
Thanks Again Man
I'm not on ICS, but I don't understand the playful options in the v6 supercharger and what each of them does (in layman please). If you have any link for help, please share it=). thanks
wakoko79 said:
I'm not on ICS, but I don't understand the playful options in the v6 supercharger and what each of them does (in layman please). If you have any link for help, please share it=). thanks
Click to expand...
Click to collapse
go to the original thread... link in the OP
Thread Updated! new script update9 RC8.... changelog added... fixes for superuser binary !!
Updated V6 U9RC8.1
I got syntax error on line 5555! In both 8.1 and 8 scripts.
Note: I'm just sharing the work of the XDA Member MatrixDJ96.
MatrixDJ96 said:
Would you like to speed up your rom, more stability, more battery life, no lag to open system app and better ram utilization? Now you can! (Only For Rooted Phone And Deodexed Rom)
This is possible with my Odexer Tool created myself.
I worked a lot of time to create this script.
What is ODEX and DEODEX?
In Android file system, applications come in packages with the extension .apk. These application packages, or APKs contain certain .odex files whose supposed function is to save space. These odex files are actually collections of parts of an application that are optimized before booting. Doing so speeds up the boot process, as it preloads part of an application. On the other hand, it also makes hacking those applicationsdifficult because a part of the coding has already been extracted to another location before execution.
THEN COMES DEODEX
Deodexing is basically repackaging of these APKs in a certain way, such that they are reassembled into classes.dex files. By doing that, all pieces of an application package are put together back in one place, thus eliminating theworry of a modified APK conflicting with some separate odexed parts.
In summary, Deodexed ROMs (or APKs) have all their application packages put back together in one place, allowing for easy modification such as theming. Since no pieces of code are coming from any external location, custom ROMs or APKs are always deodexed to ensure integrity.
Another explanation is this:
If you odex the rom, you'll have also more space in data (this is important because if you don't have partition ext4 in sdcard, you won't have too free space), increase battery life, more stability and increase perfomance( the Rom is more faster to load system and app) but you can't modifie apk after odex (you can't mod program with classes.dex).
Infact ODEX is an OPTIMIZED-DEX and Android load system and app faster than deodexed (DEOPTIMIZED-DEX) app and system.
When you have a deodex file (a lot of roms are deodexed) you have File.apk in system/app and in data/dalvik-cache/[email protected]@[email protected], but with odex file you have File.apk in system/app and File.odex in system/app
With these explanation you can understand that:
Odexed Rom = +fast -difficult_customization +more_battery_life +better_stability +less_ram_utilization
Deodexed Rom = -slow +customization -less_battery_life -less_stability -worse_ram_manager
If you run my script with remove classes.dex and zipalign disabled your rom will be odexed without "-difficult_customization"
My script does (it depends by option):
- odex framework
- odex app in system/app
- odex app in system/priv-app (if you have android kitkat)
- remove classes.dex and zipalign from jar/apk (if you enable this option)
All commands of my script:
+ frame [odex all framework]
+ sysapp [odex all system apps]
+ all [odex framework and system apps]
+ set [change settings of the script];
> 1 [enable/disable remove classes.dex and zipalign]
> 2 [back]
+ exit [exit from the script]
WORKING IN ALL ROM (Froyo, GingerBread, IceCreamSandwich, JellBean And KitKat)
AOSP - AOKP - CM - MIUI - PA - PAC - BASE STOCK - ALL!
Credits:
- @MatrixDJ96 (Me)
- MrTony68 (Beta Tester)
- @Thyrus (Beta Tester)
- @angel.sea (For Support)
To Devs
If you want to use this script to odex your ROM, please give me credit in your ROM thread.
Thanks for the cooperation
For More Info Contact Me By Email: [email protected]
ENJOY WITH MORE STABILITY, SPEED AND BATTERY LIFE!!!
Please, give me a thanks if you like my script
By MatrixDJ96
Click to expand...
Click to collapse
MatrixDJ96 said:
IMPORTANT TO ODEX YOUR ROM:
To Odex Framework (Command 'dexo -fr') You Must Have At Least 16% Of Free Space In System.
To Odex System Apps (Command 'dexo -sys') You Must Have At Least 26% Of Free Space In System.
How to odex:
- download file
- go to recovery
- install zip
- reboot
- open terminal emulator (will be installed automaticaly)
- setting terminal type "Linux"
- type su to obtain root permission
- type odex and enjoy!
IF YOU HAVE ENABLED "REMOVE CLASSES.DEX & ZIPALIGN", A FLASHABLE ZIP BY RECOVERY WILL BE CREATED WITH OPTIMIZED SYSTEM SO REBUILD IN RECOVERY AND FLASH THIS FILE (You find it in sdcard and it's called "Optimized-System_NAMEOFYOURDEVICE.zip")
I hope that all are clear
+++++++++++++++++++++++++++++++++
Download link:
Odexer Tool
+++++++++++++++++++++++++++++++++
Click to expand...
Click to collapse
Nice thread bro:thumbdown::thumbdown::thumbdown::thumbdown::thumbup::thumbup::thumbup:
This is awesome tool.
But, i cant install ver beta 5.5 via cwm. Error: install abort...:banghead:
Send from USS Enterprise CVN-65 using Tomahawk
tuan.cse06 said:
This is awesome tool.
But, i cant install ver beta 5.5 via cwm. Error: install abort...:banghead:
Send from USS Enterprise CVN-65 using Tomahawk
Click to expand...
Click to collapse
Change the updater-script with any of the other CWM flashable zip.
aniket.lamba said:
Note: I'm just sharing the work of the XDA Member MatrixDJ96.
Click to expand...
Click to collapse
UPDATE
MatrixDJ96 said:
UPDATE
Click to expand...
Click to collapse
Will update it in evening
MatrixDJ96 said:
UPDATE
Click to expand...
Click to collapse
Does not work
Sent from my Galaxy Nexus
nice one bro
Although the device is protected but it is an android ( The best open-source OS ) and here are the simplest steps :-
1- Rooting the device by Vroot
2- Install terminal
3- Install BusyBox
4- Install xposed
5- Write those commands in the terminal : su
mount -o rw,remount /system
chattr -R -i /system
6- Open any file manger and search for a file named set_immutable.list
7- Rename it into set_immutable.list.old
8- Go to INSTALLATION MODE in exposed frameword and tick on disable resource hooks
9- Tab on Install/Update DO NOT ACCEPT THE REBOOT
10- Go back to the file manger and rename the file " set_immutable.list.old " back to " set_immutable.list " ( you will get boot-loops if you skipped this step )
# Now you can also edit the build.prop
# As soon as you reboot the system permission will be back to the main original permission
# You also can edit host file my the same steps ( no need to say without re-installing exposed...... -_-)
# Now you can reboot
Tested my self, Written by me, Found the info on a French development website
What I tested with exposed :-
1- Android Apps Theme Engine pro >> Not Working
2- Android L Navigation Bar >> Not Working
3- Android L Theme >> Not Working
4- Android Theme Engine >> Not Working
5- Battery Home Icon >> Working
6- Burnt Toast >>Not Working
7- GravityBox [KK ]>> Not Working, but I
8- MaxLock >> Working
9- Network Speed Indicator >> Not Working
10- Physical Button Music Control >> Working
11- Statusbar download progress >> Working
12- VolumeStep+ >> Working
13- PinNotif >> Working
14- XHalo Floating Window >> Working
15- Xinstaller >> Working
= Everyone say what he test
Thanks. On my rooted x1 (7d-501u, 4.4.2 EMUI 3.0 400dpi), I simply install xposed 2.5.1.
I installed appsetting 1.8, try changing dpi but no effect, no error report. Any recommendation?
Sent from my X1 7.0 using Tapatalk
If Gravitybox doesn't work, not much point for Xposed.
I am on R002C209B008 Malaysia, and although I did the system r/w commands and got Xposed installed, nothing works. After a reboot, Xposed says it's not working.
I tried 2.4.1 which installed, but none of the newer mods work. I then tried 2.5.1, which shows the framework in red color. 2.7 experimental 1 installed with green text, but again nothing works after a reboot.
The trick that used to be edit build.prop for the hwtheme=0 no longer works.
Huawei also needs to release their kernel and ROM sources.
bthoven said:
Thanks. On my rooted x1 (7d-501u, 4.4.2 EMUI 3.0 400dpi), I simply install xposed 2.5.1.
I installed appsetting 1.8, try changing dpi but no effect, no error report. Any recommendation?
Sent from my X1 7.0 using Tapatalk
Click to expand...
Click to collapse
I didn't notice any change too
joytest said:
If Gravitybox doesn't work, not much point for Xposed.
I am on R002C209B008 Malaysia, and although I did the system r/w commands and got Xposed installed, nothing works. After a reboot, Xposed says it's not working.
I tried 2.4.1 which installed, but none of the newer mods work. I then tried 2.5.1, which shows the framework in red color. 2.7 experimental 1 installed with green text, but again nothing works after a reboot.
The trick that used to be edit build.prop for the hwtheme=0 no longer works.
Huawei also needs to release their kernel and ROM sources.
Click to expand...
Click to collapse
Have you tried those steps carefully ?, i have tested them on my 7D-501u on Rom emui 2.3, emui 3.0 B002 & B005
Which version of xposed did you use?
not working
i followed your steps but it did not work well with my b010 emui 2.3 K.K 4.4.2 and besides exposed will be nothing without the gravity box
its a hell of a good app to tweak your device i wish someone find a way for this big problem we need gravity box
Ok, I admit I missed NOT renaming set_immutable.list.old back to its original name.
After this, Xposed 2.7.1 experimental works, and AppSettings works.
However, Dimensions and Gravitybox still do not work.
Damn you and your stupid theming engine Huawei.
joytest said:
Ok, I admit I missed NOT renaming set_immutable.list.old back to its original name.
After this, Xposed 2.7.1 experimental works, and AppSettings works.
However, Dimensions and Gravitybox still do not work.
Damn you and your stupid theming engine Huawei.
Click to expand...
Click to collapse
I can confirm Xposed 2.5.1 framework and App Settings 1.8 module works on EMUI 3.0 B008 (for 503L).
I installed an older version of Xposed, upgrade it to 2.5.1 within Xposed, then installed the App Settings 1.8 module and I can now change DPI for apps that I want to work like they will on tablets.
The only caveat - Huawei's theme engine will break with the above arrangement (this is the same when on 2.3 B010) - u wont get any error or FC but u 'cannot' change theme; no matter which theme u choose, the icons will remain as default.
I m ok as I use Action Launcher and dont mind this cosmetic setback, against the freedom to be able to choose the DPI of each app!
I did not do any hacks nor install busybox to the X1 prior to installing Xposed, only flashed the KangVIP mod to get clean root.
YMMV
---------- Post added at 05:36 AM ---------- Previous post was at 05:29 AM ----------
bthoven said:
Thanks. On my rooted x1 (7d-501u, 4.4.2 EMUI 3.0 400dpi), I simply install xposed 2.5.1.
I installed appsetting 1.8, try changing dpi but no effect, no error report. Any recommendation?
Sent from my X1 7.0 using Tapatalk
Click to expand...
Click to collapse
if you are sure u got Xposed 2.5.1 and App Settings 1.8 properly installed and activated (did u activate the App Settings 1.8 module within Xposed?), the only thing missing may be what the KangVIP mod did to the system, you nay want to try flashing that (your X1's bootloader must be unlocked).
if u can download from china servers, the link is as below, else i will try to upload to mediafire for u (author is quite particular abt rehosting his files)
URL: pan.baidu.com/s/1jGLzK4u
Code： 7c6s
if you cannot download from china servers, then use the link below
http://www.mediafire.com/download/04izc31qkkl4d2q/X1-EMUI3.0-B008_img.rar
good luck!
(i find wifi on 3.0 B008 not as good as when on 2.3 B010, but all other new features are pretty sweet)
daser4ever96 said:
Although the device is protected but it is an android ( The best open-source OS ) and here are the simplest steps :-
1- Rooting the device by Vroot
2- Install terminal
3- Install BusyBox
4- Install xposed
5- Write those commands in the terminal : su
mount -o rw,remount /system
chattr -R -i /system
6- Open any file manger and search for a file named set_immutable.list
7- Rename it into set_immutable.list.old
8- Go to INSTALLATION MODE in exposed frameword and tick on disable resource hooks
9- Tab on Install/Update DO NOT ACCEPT THE REBOOT
10- Go back to the file manger and rename the file " set_immutable.list.old " back to " set_immutable.list " ( you will get boot-loops if you skipped this step )
# Now you can also edit the build.prop
# As soon as you reboot the system permission will be back to the main original permission
# You also can edit host file my the same steps ( no need to say without re-installing exposed...... -_-)
# Now you can reboot
Tested my self, Written by me, Found the info on a French development website
What I tested with exposed :-
1- Android Apps Theme Engine pro >> Not Working
2- Android L Navigation Bar >> Not Working
3- Android L Theme >> Not Working
4- Android Theme Engine >> Not Working
5- Battery Home Icon >> Working
6- Burnt Toast >>Not Working
7- GravityBox [KK ]>> Not Working, but I
8- MaxLock >> Working
9- Network Speed Indicator >> Not Working
10- Physical Button Music Control >> Working
11- Statusbar download progress >> Working
12- VolumeStep+ >> Working
13- PinNotif >> Working
14- XHalo Floating Window >> Working
15- Xinstaller >> Working
= Everyone say what he test
Click to expand...
Click to collapse
when i enter 'mount -o rw,remount /system' on terminal it says 'mount: Invalid Argument'
what i need to do??
Hi, i've worked on B396 stock rom , to give it more options :
- Multi user
- Call Recorder (native)
- hide navbar
- 4G icon
- 6 themes from Huawei mate10
- init.d support
- i forget ...
In aroma installer you can:
- Root systemless
- Xposed systemless
- get Viper4android systemless
- Choice No Gapps/microG/Official Gapps
- install usefull Xposed modules
- install extra apps ...
and more
CHANGELOGS:
2018/02/10 : v1.1
System Updated :
- add Twin/Clone app from huawei (read post #02 to correct use)
- add Cust support for PLK-L01 or PLK-AL10 models
Gapps Updated :
- GMS Core (services google play)
- Phonesky (Play store)
- Velvet (google now)
- Gmail2 (google mail)
- Latinime (google keyboard)
- talkback (Accessibility service)
- WebViewGoogle
Extra Updated:
- GPS_locker
- Firefox
Xposed Modules Updated:
- Pixel_NavBar
Others Updates:
- Install process (microG/Nothing) : will wipe dalvik +cache
INSTALL:
Wipe datas if comming from NOT emui ROM
Wipe Dalvik+cache if comming from emui ROM
If you want NOGAPPS or MicroG:
First: install ROM+included GAPPS, (no need to root etc ..) reboot and do the setup ...
SECOND: run Installer again (no need to flash the rom) just select your options...
MicroG users: read post #02 to set it correctly
first boot take 3mn, or 10mn with Xposed
Please update your device to B390 before install:
https://forum.xda-developers.com/honor-7/development/stock-b390-twrp-t3723635
Download :
http://www.mediafire.com/file/jdl903g69wbimqo/B396_Reloaded_Full_1.1.zip
Kernel updated to 3.10.108 (end of life)
http://www.mediafire.com/file/wgc44dx0khiafyb/Kernel_B396_reloaded_v2.1.zip/file
YOU MUST USE MAGISK v14 ONLY, another version will break GPS.
#################################################
DO NOT MIRROR MY LINK without my authorization
DO NOT POST/PUBLISH at any other place without my authorization
#################################################
microG config (it's a mess) and usage:
1/ active Xposed module to Allow signature spoofing
2/ open microG app : active google registration, then config UnifiedNLP
...reboot...
3/ create your google account
to use sync of contacts/calendar/gmail
1/ in settings/apps/calendar/authorizations : give all authorizations
2/ in settings/apps/contacts/authorizations : give authorizations (minimum: contact+phone)
3/ in settings/apps/Gmail/authorizations : give all authorizations
4/ check that synchro is activated
5/ in google account start synchro
6/ wait for sync .... can take time depend of your network speed.
Play store will get updated automatically to new version ... wait it ..
if any off theses apps don't work properly do :
1/ settings/apps/*your_app*/storage : wipe data and cache
2/ kill the app
3/ do authorization again ..
4/ restart the app
NOTE : new maps (February 2018) is not supported, use 9.67.xxx (November 2017) version insteed.
i have full workings : Playstore/Gmail/Maps,and my contacts/mails/calendar are synchronized, so i know it work
Twin/Clone app config and usage:
Setting / Twin App : On the app you want to clone:
- Actually: Whatsapp, facebook.katana, facebook.orca, Mega .
Add/remove (need root):
in system/emui/base/xml/hw_clone_app_list.xml
<?xml version="1.0" encoding="utf-8"?>
<!-- DTS2016080802881 shiyuanchang/00271386 20160822 created -->
<AppClone>
<package name="com.whatsapp"/>
<package name="com.facebook.katana"/>
<package name="com.facebook.orca"/>
<package name="mega.privacy.android.app"/>
</AppClone>
Exemple to add Twitter and remove facebook.orca:
Install any "package name viewer" app , and use it to see package name
for Twitter it is : com.twitter.android
<!-- DTS2016080802881 shiyuanchang/00271386 20160822 created -->
<AppClone>
<package name="com.whatsapp"/>
<package name="com.facebook.katana"/>
<package name="com.twitter.android"/>
<package name="mega.privacy.android.app"/>
</AppClone>
- Save the file
- go to settings/apps and select "settings" then "storage" and wipe datas
- now your Twin/Clone app list is updated with Twitter
now I install it, I hope I do not have any problems with the signal, like MM + D EMUI 4.1 by WBT v5.0 (B371), and I hope the battery keeps more like Stock B390
ilovemuzic said:
now I install it, I hope I do not have any problems with the signal, like MM + D EMUI 4.1 by WBT v5.0 (B371), and I hope the battery keeps more like Stock B390
Click to expand...
Click to collapse
You will tell me ... For good battery life i just enable SIM data's , and disable overs options like aggregation etc ..
- What is your provider and country ?
Speedo.thc said:
You will tell me ... For good battery life i just enable SIM data's , and disable overs options like aggregation etc ..
- What is your provider and country ?
Click to expand...
Click to collapse
Telekom Romania
Hey! i've just installed it but when i have to accept "terms and condition" i can't do it any solution?
tamasigerald said:
Hey! i've just installed it but when i have to accept "terms and condition" i can't do it any solution?
Click to expand...
Click to collapse
Please update your device to B390 before install
hi
i installed this rom.first boot is ok.but when i restart phone. it stuked in boot image.what should i do?
Hi, boot logo or bootanimation ?
boot animation
Xposed doesnt seem to work. Xposed installer says 'Installed, but not active'. When trying to install systemless framework, the installer app crashes.
Am I doing something wrong here or..?
EDIT: Tried few times to reflash the rom but every time after setting up the phone, if I reboot I will be stuck in bootloop.
Hi, you are the second to tell that, I will do test after tomorrow to try my setup, right now it was ok.
hi @Speedo.thc
thank you for your new rom
this rom support kang vip setting?
Heatti said:
Xposed doesnt seem to work. Xposed installer says 'Installed, but not active'. When trying to install systemless framework, the installer app crashes.
Am I doing something wrong here or..?
EDIT: Tried few times to reflash the rom but every time after setting up the phone, if I reboot I will be stuck in bootloop.
Click to expand...
Click to collapse
You must install the version I provided in aroma installer.
levolotion said:
hi @Speedo.thc
thank you for your new rom
this rom support kang vip setting?
Click to expand...
Click to collapse
Hi, not a Kangvip based, but many things from Kang can be done with xposed and modules I've selected.
Speedo.thc said:
You must install the version I provided in aroma installer.
Click to expand...
Click to collapse
I chose the Xposed option in aroma when flashing. After flashing the rom and setting up the phone, checked the xposed app and it was already inactive from the start.
Heatti said:
I chose the Xposed option in aroma when flashing. After flashing the rom and setting up the phone, checked the xposed app and it was already inactive from the start.
Click to expand...
Click to collapse
It's active only if you flash Magisk v14 , which is inside rom installation.
By order it must be :
1: Magisk
2: Xposed
Hi speedo, nice to see that you are devoloping for our nice device. I have tested all your roms but aktual i am returned to your mmkang 3.2, running as a good daily driver. Coming from it, is it possible to flash your rom with twrp, like your other roms?
Should I delete fingerprints before flashing?
Thank you. I am very curious to test it...
For next versions, it would be nice to have a dark theme, looking like oreo or nougat...
After installation, the google maps application does not start
Hi speedo,, i leave miui for this one, could i suggest you to add smart-e (better than floating control for me), and can you tell me how you hide navbar? Thanks.
░▒▄█▀▄░ █▀▄ █▀▀▄ █▀▀ █▄░█ ▄▀▄ █░░ ▀ █▄░█ █▀▀░░▒▐█▀▀▄ ▄▀▄ █▄░▄█
▒▐█▄▄▐█ █░█ █▐█▀ █▀▀ █░▀█ █▀█ █░▄ █ █░▀█ █▀▀░░▒▐█▒▐█ █░█ █░█░█
▒▐█░▒▐█ ▀▀░ ▀░▀▀ ▀▀▀ ▀░░▀ ▀░▀ ▀▀▀ ▀ ▀░░▀ ▀▀▀░░▒▐█▀▄▄ ░▀░ ▀░░░▀
Key Features
Based on @foobar66 GoogleWiz ROM
NX Kernel
Samsung SoundAlive Dolby Atmos
Shell Script Advanced Features (SSAF) *See post #2
Updates will come in small service packs instead of a complete ROM update unless necessary
Samsung Gear might work out of the box
Removed some tweaks that I deemed useless.
Removed a few Google apps (Drive, Map, YouTube, etc) from the ROM, you can install them from Play Store instead
Emergency Launcher, UltraPowerSavingMode, SmartCapture, SmartSwitch, LiveWallpaper
Removed GoogleWiz's customizing script
Installation
Backup is always recommended
You should be able to dirty flash from stock/GoogleWiz ROM
You might not be able to boot, which is why 1. is important
Install any patch or cumulative update zip.
Adrenaline Experience
Some apps that I personally use and recommend:
SolidExplorer
SwiftBlack
Fluid Navigation Gestures
Download
*Feel free to mirror, however, monetizing the download link in any way is strictly prohibited.
Google Drive
Patches & Cumulative Update
Bootloader
Source
GITHUB: Shell Script Advanced Features
Credit
@foobar66
@SoLdieR9312
@Noxxxious
@xpirt
amirzaidi for Pixel Launcher
Shell Script Advanced Features
Everything that can be done in shell script shall be done in shell script.
You will need to install a terminal emulator from PlayStore to use this function.
Current functions:
Remap Bixby Key
Change Device Name
Max Volume Warning Toggle
Enable Stereo Speaker
Navigation Bar Toggle
Immersive Mode
Set DNS
Powercfg by yc9559 @ CoolApk [EXY8895]
Host File Based Adblock
Service Disabler
Set big Cluster Max Freq
Set LITTLE Cluster Max Freq
Script OTA Self Update
Reboot Device
Reboot into Recovery
To use, type the following in a terminal emulator
Code:
su
cfg
Code
Issues
TODO/Progress
Wiki
Credits
Changelog
v1.0 - The Late Santa [26 Dec 2018]
Initial Release.
v2.0 - WorstJet [13 Jan 2019]
Reverted Samsung Camera to stock
Samsung Gallery is back to the party
Added quite a lot of files that are related to VOLTE/VOWIFI (credit), you will need to flash CSC installer to install your CSC files
NX Kernel R19
Magisk v18.0
Almost up-to-date SSAF
Flashable Update Zip
[Patch] - Smaller fix, you need to install all patches according to the number, you do not need to reboot in between patches. (Flash 1.0 first, then 2.0, 3.0 ...)
[Cumulative Update] - Bigger update containing all the previous small patches.
WorstJet
-Nothing available as of now
Previous Version(s)
The Late Santa
[Patch 1.0] 26122018
Enabled navigation bar
Added Project WIPE by yc9559 @ CoolApk, default setting is set to [Balance]
Changed config to cfg for easier access
[Patch 2.0] 27122018
Added GearManagerStub.apk
Added Launcher from amirzaidi
[Patch 3.0] 27122018.2
Updated custom menu to include adblock and service disabler
[Patch 4.0] 30122018
Fixed permissions
Minor update to SSAF
Service disabler in SSAF will now run in complete silence
Enabled UHQ tile in csc
[Patch 5.0] 31122018
SSAF now able to set DNS properly
SSAF now able to change big cluster max freq
[Patch 6.0] 03012019
SSAF now able to grab dependencies from GitHub if any is missing
SSAF now able to change LITTLE cluster max freq
Minor fixes to powercfg
[Patch 7.0] 05012019
SSAF now able to enable stereo speaker
Thanks! Haven't been able to download the ROM you're basing yours as it always hangs for me with megaupload, will try yours as I have better luck with gdrive. Slds.
well stuck on android is starting
Android is starting and no navbar,even going for settings and reenable it
pbls said:
Android is starting and no navbar,even going for settings and reenable it
Click to expand...
Click to collapse
I left the navigation bar disabled in build.prop accidentally
Edit the last line in build.prop:
Code:
qemu.hw.mainkeys=1
to
Code:
qemu.hw.mainkeys=0
and reboot.
or use the custom menu to re-enable it then reboot
or edit the build.prop and reflash ROM
EDIT:
or flash the attached flashable patch zip
how do i install the rom?
well the navbar is back and still stuck at android is starting
ps: this rom doesnt have a launcher thats why i keep stuck at android is running
Is Volte vorking? Foos original rom hasn't.
Good job ! I will test the rom i i will give u a feedback !
You will planning to add some more mods ?
Thanks.
the ROM doesn't have a launcher,you must go to the Google play to install one
pbls said:
the ROM doesn't have a launcher,you must go to the Google play to install one
Click to expand...
Click to collapse
Ah.. now I know why it doesn't boot.
navaskp said:
Is Volte vorking? Foos original rom hasn't.
Click to expand...
Click to collapse
It isn't working either
xtmzone said:
Good job ! I will test the rom i i will give u a feedback !
You will planning to add some more mods ?
Thanks.
Click to expand...
Click to collapse
I'd refrain from adding 'mod' myself that requires to be redone every security update as it wastes time.
Feature will be added to the custom menu instead as that is portable, work across updates and even devices.
Everything that's doable in shell script shall be done in shell script.
ImbaWind said:
AdrenalineROM Custom Menu
You will need to install a terminal emulator from PlayStore to use this function.
Current functions:
Remap Bixby Key
Change Device Name
Max Volume Warning Toggle
Navigation Bar Toggle
Immersive Mode
Set DNS
Powercfg by yc9559 @ CoolApk [EXY8895]
Host File Based Adblock
Service Disabler
Reboot Device
Reboot into Recovery
To use, type the following in a terminal emulator
Code:
su
cfg
Click to expand...
Click to collapse
I always get the result "permission denied"
Su rights granted to terminal emulator. Used the commands su "enter" cfg "enter". What am I doing wrong?
xxxPLETTIxxx said:
I always get the result "permission denied"
Su rights granted to terminal emulator. Used the commands su "enter" cfg "enter". What am I doing wrong?
Click to expand...
Click to collapse
Sounds like you are doing everything right, but I'm not sure why.
Can you attach a screenshot?
keyboard is not working for me
ImbaWind said:
Sounds like you are doing everything right, but I'm not sure why.
Can you attach a screenshot?
Click to expand...
Click to collapse
Sure. Hope you can help.
ImbaWind said:
Sounds like you are doing everything right, but I'm not sure why.
Can you attach a screenshot?
Click to expand...
Click to collapse
Same here,but loving the ROM nonetheless and I've installed so many
xxxPLETTIxxx said:
Sure. Hope you can help.
Click to expand...
Click to collapse
pbls said:
Same here,but loving the ROM nonetheless and I've installed so many
Click to expand...
Click to collapse
Code:
su
mount -o rw,remount /system
chmod 777 /system/bin/cfg
cfg
This should help