Hello, I have a big problem, I wanted to install a new rom pres latest version of the Flash tool and I formatted the phone and then wanted to install (download), and instead I'm still writes an error:ERROR BROM: S_FT_ENABLE_DRAM_FAIL (4032).
You really do not know what to do, I tried a thousand thousand ROMs and flash TOOL, perhaps thousands of drivers on the phone MKT6589 drivers and still nothing.
I have a cell phone Star S7189 and it would not fit me because I am from Czech Republic and I ordered it from China, plus all the information to calmly bring upon request, but I'd be happy if someone advise how to fix it and install a ROM there calmly and basic .
Sorry for my English is not very good. I enclose a picture of what I'm doing.
Thank you for your willingness to help me solve.
The fact is quite acute as I am without a phone to free his right hand.
testboy255 said:
Hello, I have a big problem, I wanted to install a new rom pres latest version of the Flash tool and I formatted the phone and then wanted to install (download), and instead I'm still writes an error:ERROR BROM: S_FT_ENABLE_DRAM_FAIL (4032).
You really do not know what to do, I tried a thousand thousand ROMs and flash TOOL, perhaps thousands of drivers on the phone MKT6589 drivers and still nothing.
I have a cell phone Star S7189 and it would not fit me because I am from Czech Republic and I ordered it from China, plus all the information to calmly bring upon request, but I'd be happy if someone advise how to fix it and install a ROM there calmly and basic .
Sorry for my English is not very good. I enclose a picture of what I'm doing.
Thank you for your willingness to help me solve.
The fact is quite acute as I am without a phone to free his right hand.
Click to expand...
Click to collapse
I am facing a similar problem after formatting my device.
Did you ever find a solution?
Yes, I have already found a solution, it was a problem in the ROM, it is necessary to find an original ROM only on the specific type of cell phone and everything goes smoothly.
testboy255 said:
Hello, I have a big problem, I wanted to install a new rom pres latest version of the Flash tool and I formatted the phone and then wanted to install (download), and instead I'm still writes an error:ERROR BROM: S_FT_ENABLE_DRAM_FAIL (4032).
You really do not know what to do, I tried a thousand thousand ROMs and flash TOOL, perhaps thousands of drivers on the phone MKT6589 drivers and still nothing.
I have a cell phone Star S7189 and it would not fit me because I am from Czech Republic and I ordered it from China, plus all the information to calmly bring upon request, but I'd be happy if someone advise how to fix it and install a ROM there calmly and basic .
Sorry for my English is not very good. I enclose a picture of what I'm doing.
Thank you for your willingness to help me solve.
The fact is quite acute as I am without a phone to free his right hand.
Click to expand...
Click to collapse
Hi I am new here I got the same error in my huawei y511 u30 I formated by mistake the preloader I downloaded the original firmware but with no hope it doesn't work I get error 4032 in sp flash tool
Related
i just bought a chinese htm xs5292 runnin 4.1.1 i want to root and upgrade to 4.3 any help on how to do this would be greatly appreciated, here are the specs
manufacturer - htm
model - x5292
android version - 4.1.1
kernel - x5292 dual core
software - mt5617-c913-en-vo5
hardware - c913-v1.02
i'm a first timer at this so please speak like you would to a child (even though i'm 35)
many thanks in advance
paul
paul0909 said:
i just bought a chinese htm xs5292 runnin 4.1.1 i want to root and upgrade to 4.3 any help on how to do this would be greatly appreciated, here are the specs
manufacturer - htm
model - x5292
android version - 4.1.1
kernel - x5292 dual core
software - mt5617-c913-en-vo5
hardware - c913-v1.02
i'm a first timer at this so please speak like you would to a child (even though i'm 35)
many thanks in advance
paul
Click to expand...
Click to collapse
I can help you get rooted. First you will need to install drivers on your PC so your device can communicate with the root program. Then try this:
http://forum.xda-developers.com/showpost.php?p=43163569&postcount=7
If that dont work, let me know. You can always use MTK Droid Tools and SP flash tool to pull your stock recovery and port it into a custom recovery that will allow you to flash a simple root.zip
Hope this helps!
usb drivers
thanks Klown80, that looks like it should work, but first i need to install my usb drivers, i have loked at a ton of sites and they all didnt work, i need spreadtrum usb drivers, but can't figure out wich ones, a few said they all worked on any spreadtrum phone, but either im installing them incorrectly, or they simply didnt work,
again, thanks for any help in advance
paul
paul0909 said:
thanks Klown80, that looks like it should work, but first i need to install my usb drivers, i have loked at a ton of sites and they all didnt work, i need spreadtrum usb drivers, but can't figure out wich ones, a few said they all worked on any spreadtrum phone, but either im installing them incorrectly, or they simply didnt work,
again, thanks for any help in advance
paul
Click to expand...
Click to collapse
Try using this, it installs drivers for many different phones, it may not be the actual manufacturers drivers for your specific device but it will help get your phone talking to your PC:
http://www.snappea.com/
Also - Make sure you are going into settings and turning USB debugging on. You can usually find this under Settings > Developer Options.
snapea
Again, thanks Klown, but no joy, i tried serveral times and after 15 - 20 mins of "fobulating" (is that even a real word ) my phone it said "failed to processs phones data" i tried restarting both devices etc and a couple of other thing suggested but no joy.
Any other ideas, as always thanks in advance.
Paul
oh ps, i also tried to connect to snapea via wifi, but got the same message
paul0909 said:
Again, thanks Klown, but no joy, i tried serveral times and after 15 - 20 mins of "fobulating" (is that even a real word ) my phone it said "failed to processs phones data" i tried restarting both devices etc and a couple of other thing suggested but no joy.
Any other ideas, as always thanks in advance.
Paul
oh ps, i also tried to connect to snapea via wifi, but got the same message
Click to expand...
Click to collapse
Try these drivers
https://www.dropbox.com/sh/oaslz8xuxk7ag50/VRzHnZvA-b
finally
\it worked, can't thank you enough, one more bothersome question, now i have my phone rooted how do i safely, and i emphasise safely upgrade from 4.1.1 to 4.3
I have looked into it a bit myself, and am in half a mind to give it a go, but the warnings about bricking my phone always puts me off, so once again, thanks in advance for any help given, and many thanks for the help so far.
Paul
paul0909 said:
\it worked, can't thank you enough, one more bothersome question, now i have my phone rooted how do i safely, and i emphasise safely upgrade from 4.1.1 to 4.3
I have looked into it a bit myself, and am in half a mind to give it a go, but the warnings about bricking my phone always puts me off, so once again, thanks in advance for any help given, and many thanks for the help so far.
Paul
Click to expand...
Click to collapse
Go here and download MTK Droid Tools from first post:
http://forum.xda-developers.com/showthread.php?t=2160490&styleid=18
Run the program and connect your phone to PC, this tool will tell you lots of info about your phone but the main function is to possibly back up your stock firmware (This is good to have if you plan on trying to flash anything to the phone, this way you will have your stock files to fall back on in case something you flash to the phone does not work.) Once you have MTK Droid Tools running and phone connected, what does it say next to Hardware on the phone info tab please?
I am not sure off top of my head about updating to a higher version of Android but this back up step is REALLY important. It is hard if not impossible to find stock firmware floating around on the net for these chinese clone devices. IF you have stock files backed up you can flash almost anything you want knowing you have a way to restore your phone to working order. IF you look around here on XDA you will see tons of posts by people looking for the stock firmware for their clone phone after soft bricking it playing around. Sadly there is not much help for them unless they find someone with the EXACT same phone and are willing to share their back up (if the next person made one theirselves that is!)
hardware
Klown80 said:
Go here and download MTK Droid Tools from first post:
http://forum.xda-developers.com/showthread.php?t=2160490&styleid=18
Run the program and connect your phone to PC, this tool will tell you lots of info about your phone but the main function is to possibly back up your stock firmware (This is good to have if you plan on trying to flash anything to the phone, this way you will have your stock files to fall back on in case something you flash to the phone does not work.) Once you have MTK Droid Tools running and phone connected, what does it say next to Hardware on the phone info tab please?
I am not sure off top of my head about updating to a higher version of Android but this back up step is REALLY important. It is hard if not impossible to find stock firmware floating around on the net for these chinese clone devices. IF you have stock files backed up you can flash almost anything you want knowing you have a way to restore your phone to working order. IF you look around here on XDA you will see tons of posts by people looking for the stock firmware for their clone phone after soft bricking it playing around. Sadly there is not much help for them unless they find someone with the EXACT same phone and are willing to share their back up (if the next person made one theirselves that is!)
Click to expand...
Click to collapse
Thanks again, while i go to the link and follow the next steps i thought i'd put up the hardware version you asked for
hardware - c913-v1.02
Paul
edit
even though my pc now recognises the fact that tere is a spreadtrum phone in my devices list and i managed to root it ok, when i load up mtk droid tools it says "the device isn't revealed, connect or reconnect a cable"
needless to say i tried reconnecting and it didn't change i downloaded the adb drivers from the link under the mtk link but have no idea what to do with them,
appologies for my ignorance in all of this, but like i said in my first post, i have no idea what i'm doing with all this, thanks
paul
pps the hardware version i posted was from the info on my phone
Hello everyone! Happy new month as we say in Greece!
I'm new to your forum (but I visit the forum way to often to find answers to some of the problems that my friends have with their android phones)
I am a iOS user since the release of the first iPhone (2G) and i still use that phone as my primary device.
Due to economical issues I never could buy a newer version of the device.
So I thought... an iPhone clone might do the trick for me!
SO I bought a used Goophone i5.
The specs that antutu gave me was that the phone had:
Quad-Core CPU (MT6589 if I'm not mistaken) --> which is a lie, because the phone in factory mode (Power + Vol down told me it was a dual core mt6577)
2GB RAM
I wanted to fresh install the ROM of the phone and I went to needrom.com to find the ROM for my phone.
I extracted the downloaded files and with SP Flashtool i followed the steps to install the ROM.
But once the green circle appeared in my PC monitor, and told me that everything was OK I ejected the phone cable and tried to power on the device.
The device doenst show ANY kind of response to anything (no dev manager port appearance or anything) and that means i cannot install another ROM or even go to recovery mode to install another rom OR even try another ROM from SP Flashtool.
I tried to locate the test point of the device but i couldn't since I've never tried that before and i am kinda scared that i will ruin my new pretty shiny iPhone clone.
Here are some images of the inside of the device (not taken by me) :
http://imagizer.imageshack.us/a/img541/2850/ebne.jpg
http://imagizer.imageshack.us/a/img132/1700/u36i.jpg
My questions are the following:
1) Can someone help me find the test point and give me step-by-step instructions on how to connect my phone again to SP Flashtool?
2) Is there a way to avoid finding the TP and just flashing a new ROM?
3) Does someone have the same problem as me out there?
4) Is there a newer ROM with ios7 looks?
Thanks to all,
hope you can all help me and then help you if needed :highfive:
The articles that I have already tried and researched are:
http://forum.xda-developers.com/showthread.php?t=2417060
http://translate.google.gr/translat...Z3x&rls=org.mozilla:en-US:official&channel=sb
http://translate.google.gr/translat...W8x&rls=org.mozilla:en-US:official&channel=sb
http://forum.china-iphone.ru/unbrick-goophone-i5-tk-6575-t29417.html
http://forum.xda-developers.com/showthread.php?t=1943442
UP please
UP . anyone?
3985993 4393
UP. Anyone?
up!
No one knows how to do this?
The things I also tried was to charge the battery from a external charger with leads and connect it to another device to see if it still works.
The battery so does work
But still cant locate the test point and cant connect the device to SP Flashtool.
Please help XDA members
Dear Lenovo Support,
I regret to say that unfortunately I had an opportunity to update the Android version of my phone Lenovo P780 from Android 4.2.2(stock version) to Android 4.4 Kit-Kat ver. latest released by your good Company, that I have downloaded directly from the Integrated Lenovo system update over Air/Wi-Fi.
Then, just right after update installation and phone restart I immediately started experiencing worst ever problem with Voice quality transmission while talking on the phone with any of subscribers/friends/colleagues.
Nobody can hear my voice at all or hears rustling with constant voice interruptions. Very poor voice quality transmission indeed.
You are kindly requested to support my case and provide qualified instructions on how to fix this problem and avoid farther problems, as it is impossible to use the phone anymore while such problems exists.
Thanking you in advance for your kind assistance which is highly appreciated and hoping to receive your soonest reply,
Regards,
Alexander Kozubay
E-mail: [email protected]
kozav100 said:
Dear Lenovo Support,
I regret to say that unfortunately I had an opportunity to update the Android version of my phone Lenovo P780 from Android 4.2.2(stock version) to Android 4.4 Kit-Kat ver. latest released by your good Company, that I have downloaded directly from the Integrated Lenovo system update over Air/Wi-Fi.
Then, just right after update installation and phone restart I immediately started experiencing worst ever problem with Voice quality transmission while talking on the phone with any of subscribers/friends/colleagues.
Nobody can hear my voice at all or hears rustling with constant voice interruptions. Very poor voice quality transmission indeed.
You are kindly requested to support my case and provide qualified instructions on how to fix this problem and avoid farther problems, as it is impossible to use the phone anymore while such problems exists.
Thanking you in advance for your kind assistance which is highly appreciated and hoping to receive your soonest reply,
Regards,
Alexander Kozubay
E-mail: [email protected]
Click to expand...
Click to collapse
Look in post How about some modems in the section Vibe.
Root your phone and try change modems from there. Backup first.
Reply
Dear stympy,
Thank you very much for replying to this matter.
If I get you right, this is distinctively a problem with modem, whereas the version of the modem included in general update to Kit-Kat version for users worldwide that Chinese developers Lenovo published is not compatible to work with all countries cellular network providers, particularly in my country - Ukraine and the only solution for fixing the problem is to find a compatible/proper firmware of the modem.
Please confirm.
Since, my Lenovo P780 is fixed to stock version and never been rooted before, can you please advise if root is compulsory and provide the link with step-by step guide in order to root the phone if it is compulsory to change the modem version and the link with modem versions.
Also, please advise if I will need to change for a custom rom in case of modem change etc.
Thanks again for your kind support,
Regards,
Alexander Kozubay
stympy said:
Look in post How about some modems in the section Vibe.
Root your phone and try change modems from there. Backup first.
Click to expand...
Click to collapse
kozav100 said:
Dear stympy,
Thank you very much for replying to this matter.
If I get you right, this is distinctively a problem with modem, whereas the version of the modem included in general update to Kit-Kat version for users worldwide that Chinese developers Lenovo published is not compatible to work with all countries cellular network providers, particularly in my country - Ukraine and the only solution for fixing the problem is to find a compatible/proper firmware of the modem.
Please confirm.
Since, my Lenovo P780 is fixed to stock version and never been rooted before, can you please advise if root is compulsory and provide the link with step-by step guide in order to root the phone if it is compulsory to change the modem version and the link with modem versions.
Also, please advise if I will need to change for a custom rom in case of modem change etc.
Thanks again for your kind support,
Regards,
Alexander Kozubay
Click to expand...
Click to collapse
Hi Alexander. Yes
First you must tell me if your system has been updated to KK version.Andoid 4.4.2.
Second you must tell me allso if your ROM is ROW(Rest Of the World) or Chinese.
Here is the link with how to root your phone:http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605.
This is for ROW.
Because you are from Ukraine(by the way i am sorry what is going on in your country now) here are 2 sites with two awsome comunityes from i learn alot of things:
http://4pda.ru/forum/index.php?showtopic=566352
http://lenovo-forums.ru/topic/1703-...ля-lenovo-p780-custom-rom/page-91#entry214290
I hope this will help you alot. Good Luck.
Radiomodule
Good day stympy,
Sorry for not replying for a long time. Getting back to the issue where nothing changed to a good side and I still experience problems when nobody hears me properly as if I am living underground in the tunnel and the Wi-Fi signal by the way is not stable.
My Lenovo P780 has the next firmvware:
1. Firmware ver. P780_ROW_S223, 2014/09/01 - last one updated over air recently
2. Firmware of radio module: P780.ROW.V104, 2014/09/01
Not sure whether the phone was rooted before, as I got it new device but from the seller-guy who flashed the phone.
Do I have a chinese or european version ?>
Please advise what are my next actions to normalise the work of the device.
Thanks in advance for your support
stympy said:
Hi Alexander. Yes
First you must tell me if your system has been updated to KK version.Andoid 4.4.2.
Second you must tell me allso if your ROM is ROW(Rest Of the World) or Chinese.
Here is the link with how to root your phone:http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605.
This is for ROW.
Because you are from Ukraine(by the way i am sorry what is going on in your country now) here are 2 sites with two awsome comunityes from i learn alot of things:
http://4pda.ru/forum/index.php?showtopic=566352
http://lenovo-forums.ru/topic/1703-...ля-lenovo-p780-custom-rom/page-91#entry214290
I hope this will help you alot. Good Luck.
Click to expand...
Click to collapse
kozav100 said:
Good day stympy,
Sorry for not replying for a long time. Getting back to the issue where nothing changed to a good side and I still experience problems when nobody hears me properly as if I am living underground in the tunnel and the Wi-Fi signal by the way is not stable.
My Lenovo P780 has the next firmvware:
1. Firmware ver. P780_ROW_S223, 2014/09/01 - last one updated over air recently
2. Firmware of radio module: P780.ROW.V104, 2014/09/01
Not sure whether the phone was rooted before, as I got it new device but from the seller-guy who flashed the phone.
Do I have a chinese or european version ?>
Please advise what are my next actions to normalise the work of the device.
Thanks in advance for your support
Click to expand...
Click to collapse
Hi. You have the ROW version , thats mean: Rest Of the Worl, not Chinese.
To check if your phone has root, can download any root checker from market and see.
The next step is to change modem software you must root your phone and install custom recovery like TWRP or CWM.
After root and custom recovery go to my post: How about some modems and you will find there alot of modems for KK. That modems you must use. Not others. They are located in folder:Modems for S221 LATEST UPDATE. For Europe i recomend: modem_P780_V101_Life_Vibe.zip
Your firmware is the last OTA for sure.
Good Luck.
Modem change
Thanks for your clear explanations stympy. For sure will try out today, evening time.
Before I proceed can you please advise
1. How to make proper backup.
2. Is there a way to test the quality and level of the signal after modem change procedure to see and check if the level of transmission of signal is high enough to be sure that this modem firmware suits me best.
Thanks a lot in advance
Will revert with results in any case.
stympy said:
Hi. You have the ROW version , thats mean: Rest Of the Worl, not Chinese.
To check if your phone has root, can download any root checker from market and see.
The next step is to change modem software you must root your phone and install custom recovery like TWRP or CWM.
After root and custom recovery go to my post: How about some modems and you will find there alot of modems for KK. That modems you must use. Not others. They are located in folder:Modems for S221 LATEST UPDATE. For Europe i recomend: modem_P780_V101_Life_Vibe.zip
Your firmware is the last OTA for sure.
Good Luck.
Click to expand...
Click to collapse
kozav100 said:
Thanks for your clear explanations stympy. For sure will try out today, evening time.
Before I proceed can you please advise
1. How to make proper backup.
2. Is there a way to test the quality and level of the signal after modem change procedure to see and check if the level of transmission of signal is high enough to be sure that this modem firmware suits me best.
Thanks a lot in advance
Will revert with results in any case.
Click to expand...
Click to collapse
Hi.
1.The proper backup for me is with custom recovery TWRP. You can allso backup the 2 folders(system/etc/mddb and firmware) with the modem software with ZIPME fom Google Magazin.
2. The quality and level of signal after modem change is to keep monitoring you phone signal and speak. After this you will see if signal is crushing and the one who you talk is hearing you and revert !
Usb driver
URGENT URGENT URGENT
Please provide a link for downloading a USB driver for Lenovo P780 on Windows XP x86
Thanks
stympy said:
Hi.
1.The proper backup for me is with custom recovery TWRP. You can allso backup the 2 folders(system/etc/mddb and firmware) with the modem software with ZIPME fom Google Magazin.
2. The quality and level of signal after modem change is to keep monitoring you phone signal and speak. After this you will see if signal is crushing and the one who you talk is hearing you and revert !
Click to expand...
Click to collapse
kozav100 said:
URGENT URGENT URGENT
Please provide a link for downloading a USB driver for Lenovo P780 on Windows XP x86
Thanks
Click to expand...
Click to collapse
If its so urgent... try this one !
****, I am still stuck on with USB driver Installation.
The files you have provided, I have successfully downloaded them.
When I connect the device to my laptop, the PC sees the device and asks for a driver, I have installed these drivers you provided but my laptop does not recognize them as compatible drivers saying that device is not recognised, I am stuck and I think I can not move any further because of this
Zero results
As the result of my many hours attempts yesterday to make the phone working and recognized by the PC properly lead to zero results.
The problem with the driver. The PC detects the connected device asks for a driver, installed the drivers you have provided stympy. But Lenovo P780 icon doesn't appear in the list of devices in My Computer or Explorer or when appears after Clicking on it, does not show the content at all. Empty list.
Owning many different phones, I neved had such a problem before. All devices after short drivers installation were always recognizable at first connection.
Strange and very dissapointing.
kozav100
kozav100 said:
As the result of my many hours attempts yesterday to make the phone working and recognized by the PC properly lead to zero results.
The problem with the driver. The PC detects the connected device asks for a driver, installed the drivers you have provided stympy. But Lenovo P780 icon doesn't appear in the list of devices in My Computer or Explorer or when appears after Clicking on it, does not show the content at all. Empty list.
Owning many different phones, I neved had such a problem before. All devices after short drivers installation were always recognizable at first connection.
Strange and very dissapointing.
kozav100
Click to expand...
Click to collapse
Hi. The computer with windows installed recognize this piece of hardware for just a second in device manager. I have windows 7 installed and when i connect the phone some autorun starts with the driver. Your phone does that ?
Attempts for phone root with intention to change the modem
Dear stympy and the rest of to whom it may concern,
Writing again to submit my dissapointment that has no positivie results at all. Not able to root, install TWRP or any other ROM Manager software etc...nothing!
Would like to specify that I have a Lenovo P780 device with 4 GB memory and most likely a device for sale on Chinese markets as labels on the cover box of the phone and stickers under the back cover are in Chinese language.
Although, the device I bought from a seller as new device was upgraded to a firmware he said, in fact I do update my firmware over air which is designated for the "Rest of the World" (as per Settings info.).
I go through the step-by-step guide written by stympy and I am stuck with SP Flash Tools software.. I tried using the SP Flash Tools as per the guide while the phone is in switched on and off conditions but the utility does nothing to the phone, as if it the phone is not recognized by SP Flash Tools.
When I connect the phone to the PC in the switched off condition I get the message thatn an as USB device not recognized asking for a driver (I browse to the drivers folder indicating the correct driver initially it was recognized and now not anymore) but when I Connect the phone to the PC in the switched on condition then phone is fine, immediately get recognized and I get access to the Internal Memory and SD Card content.
Very, very strange and ridiculous behaviour.
Same problem actuall to other PC connected with my Lenovo P780.
I wonder if there is another way to root my phone and change modem firmware. Please keep me advised accordingly,
Thanks a lot for your support
kozav100
kozav100 said:
Dear stympy and the rest of to whom it may concern,
Writing again to submit my dissapointment that has no positivie results at all. Not able to root, install TWRP or any other ROM Manager software etc...nothing!
Would like to specify that I have a Lenovo P780 device with 4 GB memory and most likely a device for sale on Chinese markets as labels on the cover box of the phone and stickers under the back cover are in Chinese language.
Although, the device I bought from a seller as new device was upgraded to a firmware he said, in fact I do update my firmware over air which is designated for the "Rest of the World" (as per Settings info.).
I go through the step-by-step guide written by stympy and I am stuck with SP Flash Tools software.. I tried using the SP Flash Tools as per the guide while the phone is in switched on and off conditions but the utility does nothing to the phone, as if it the phone is not recognized by SP Flash Tools.
When I connect the phone to the PC in the switched off condition I get the message thatn an as USB device not recognized asking for a driver (I browse to the drivers folder indicating the correct driver initially it was recognized and now not anymore) but when I Connect the phone to the PC in the switched on condition then phone is fine, immediately get recognized and I get access to the Internal Memory and SD Card content.
Very, very strange and ridiculous behaviour.
Same problem actuall to other PC connected with my Lenovo P780.
I wonder if there is another way to root my phone and change modem firmware. Please keep me advised accordingly,
Thanks a lot for your support
kozav100
Click to expand...
Click to collapse
Hi. Lets try this trick :
1. Look on the internet for this app called 1 Mobile Market apk
2. Download and install.
3. There you will find alot of chinese app for rooting.
4. Install and try to root your phone.
5. If you succeed instal Mobileuncle Tool and flash TWRP recovery from there.
6. After this you can flash modems
7. Good luck.
8. Waiting for feedback.
Sent from my Lenovo P780
SUCCEEDED!!!
I am back with good news. I managed, I managed!!!! Yeeehaaaa!!!!
I managed to flash TWRP and root by the method you have described above stympy.
Now, what I was doing wrong is that upon running SP Flash Tools software I was connecting the phone with USB Cable before pressing the Download Not Firmware upgrade button and NOT AFTER as advised (1) and my second fault is that I used only one scatter file coming together with TWRP and recovery.img.
I have succeeded flashing with the alternative scatter files for 4 GB version.
Check with Root checker - device rooted!!
Now, going further I have put the model firmware as "modem_P780_V23_S226_ROW" on the internal memory of the phone and will try to install it via TWRP manager.
Please advise if this firmware will not work well or work as bad as previous one, Do i just install another modem firmware on top of the installed one and that is it ?
Thanks
kozav100 said:
I am back with good news. I managed, I managed!!!! Yeeehaaaa!!!!
I managed to flash TWRP and root by the method you have described above stympy.
Now, what I was doing wrong is that upon running SP Flash Tools software I was connecting the phone with USB Cable before pressing the Download Not Firmware upgrade button and NOT AFTER as advised (1) and my second fault is that I used only one scatter file coming together with TWRP and recovery.img.
I have succeeded flashing with the alternative scatter files for 4 GB version.
Check with Root checker - device rooted!!
Now, going further I have put the model firmware as "modem_P780_V23_S226_ROW" on the internal memory of the phone and will try to install it via TWRP manager.
Please advise if this firmware will not work well or work as bad as previous one, Do i just install another modem firmware on top of the installed one and that is it ?
Thanks
Click to expand...
Click to collapse
Hi. Yes you are right. Flash modem reboot see if works, if dont work reflash other so on and on and on.. When you flash new modem will overite the old modem.
Good Luck, and waiting for feedback.
Modem Firmware change success
Dear stympy,
Once again writing my feedback to confirm success in modem firmware flashing, changing to "modem_P780_V23_S226_ROW". (looks to be latest one available to download and with hopes that most corrected version)
From now on the voice quality is better enough than before, the voice quality is much clearer and higher, but still not smooth enough.
During the tel.conversations on the other line, the person who I am talking to hears my speech with interruptions from time to time.
Do you think I still need to give another tries for alternative firmware ?
Please provide again the link to the folder with modem firmwares stored and also advise which firmware best suits my case.
Thanks
Regards,
kozav100
kozav100 said:
Dear stympy,
Once again writing my feedback to confirm success in modem firmware flashing, changing to "modem_P780_V23_S226_ROW". (looks to be latest one available to download and with hopes that most corrected version)
From now on the voice quality is better enough than before, the voice quality is much clearer and higher, but still not smooth enough.
During the tel.conversations on the other line, the person who I am talking to hears my speech with interruptions from time to time.
Do you think I still need to give another tries for alternative firmware ?
Please provide again the link to the folder with modem firmwares stored and also advise which firmware best suits my case.
Thanks
Regards,
kozav100
Click to expand...
Click to collapse
Hi. You could try one more who i think is the same as v23. The modem from LiFe rom must do the job. I used both and have no problems.
Good Luck.
I will for sure try the firmware you have advised above.
Moreover, I proceed to receive an OTA Updates for the Android system, but taking into account the last issue with modem, understanding that it will not do any good only harm. What do you think about it ?
Regards,
kozav100
Tried rooting my phone, the oukitel k10000 max, with sp flash tool and it hard bricked straight away, download and recovery don't work but windows recognizes it's there when I plug in with usb so theres hope, I just can't seem to find a solution that actually works in any way, also I didn't back up nvram or dram so now when I try to flash it gives me the (4032) error code for dram, seemingly can't flash anything at all. Help would be greatly appreciated, might even wire some paypal dough if someone can help me get it working again? Also my drivers are installed properly as far as i can tell, i installed them in the disable driver signature verification start-up mode.
Hi , try to flash this firmware and use latest version of SP Flash tool .
Firmware
http://www.mediafire.com/file/42go1g2gsfacncc/Oukitel_K10000_Max_MT6737N_20171025.zip
SP -Flash tool
https://spflashtools.com/
Teddy Lo said:
Hi , try to flash this firmware and use latest version of SP Flash tool .
Firmware
http://www.mediafire.com/file/42go1g2gsfacncc/Oukitel_K10000_Max_MT6737N_20171025.zip
SP -Flash tool
https://spflashtools.com/
Click to expand...
Click to collapse
Same as always, get the 4032 DRAM error
BauerBird said:
Same as always, get the 4032 DRAM error
Click to expand...
Click to collapse
Try to select the (W/O Battery) in connection from option . : )
Do not panic
Don't worry, I've had this exact issue for a while and fixed it. Do you have anything I could contact you on? I'm not really often on xda so if you had discord for example it'd be much easier.
SBAPKat said:
Don't worry, I've had this exact issue for a while and fixed it. Do you have anything I could contact you on? I'm not really often on xda so if you had discord for example it'd be much easier.
Click to expand...
Click to collapse
My Discord is BauerBird, thank you i didn't think it was possible to fix it
Anyone wanna help me with my K10000 Max? Tried installing the stock rom with Magisk installed, with the Smart Phone Flash tool and it completely bricked my phone. Black screen and wont even respond to the power button. When connecting it with a PC, Windows complains about not recognizing the USB device. Do i have a 200€ brick now that i can toss in the garbage? Please help before the wife finds out and kicks my head in!
EDIT: Disconnected the battery and the phone gave little signs of life again and was actually recognized by the flasher software. Tried to flash a stock image again and it gave me this:
S_FT_ENABLE_DRAM_FAIL
[Description]
l [EMI] Enable DRAM Failed.
[Solution]
l Please check your images to make sure it matches with your phone and download again.
EDIT 2: Figured it out myself! In a deep despair, i tried like a 1000 different roms but nothing worked. Even the backup rom that i made before i first flashed my phone didn't work, giving me a different error, something about the chipset. Today, i wondered why the scatterfile said my rom was for the 6735 chipset, as the K10000 MAX is a 6753 device. Changed the line in the scatter file manually and tried to flash it afterwards and i nearly **** my pants when it actually started flashing the phone. Flash was successful and now the phone is working again. Now i just need to find a working custom rom for it.
I need your discord ID as well, the numbers after # in your name.
SBAPKat said:
I need your discord ID as well, the numbers after # in your name.
Click to expand...
Click to collapse
#0023
Sorry I don't really use discord
Dear Friends,
maybe you find this request stupid, but... My small daughter became an old crappy tablet as a gift. For YouTube an some movies was the machine OK, but was full with trash software and apps. I decided to re-flash the device with the latest possible and clean FW (the thing i do with every device...). The mentioned device is a cheap Polish license, Chinese made machine. Finding the right FW was absolutely not easy, but i found one exactly for this device. Regarding to the comments it was, but the reality was not. The flash went without problems via SP Flash Tool, but after that the device doesnt start-up. The PRELOADER was maybe from other model, or it was somewhere mismatch but the SP Flash Tool let me flash the device and bricked it -> DRAM ERROR 4032. Since this time, i try to download and flash tons of GBs of FWs, but without luck. Always DRAM error, chip or EMMC / NAND mismatch. I have never experinced troubles like this...
I have some information about the device, can you please assist me to restore to FW ?
Lark Evolution X2 7 3G-GPS
Android 4.2 or 4.4.2
MT6572
Thank you very much !
dwnldr said:
Dear Friends,
maybe you find this request stupid, but... My small daughter became an old crappy tablet as a gift. For YouTube an some movies was the machine OK, but was full with trash software and apps. I decided to re-flash the device with the latest possible and clean FW (the thing i do with every device...). The mentioned device is a cheap Polish license, Chinese made machine. Finding the right FW was absolutely not easy, but i found one exactly for this device. Regarding to the comments it was, but the reality was not. The flash went without problems via SP Flash Tool, but after that the device doesnt start-up. The PRELOADER was maybe from other model, or it was somewhere mismatch but the SP Flash Tool let me flash the device and bricked it -> DRAM ERROR 4032. Since this time, i try to download and flash tons of GBs of FWs, but without luck. Always DRAM error, chip or EMMC / NAND mismatch. I have never experinced troubles like this...
I have some information about the device, can you please assist me to restore to FW ?
Lark Evolution X2 7 3G-GPS
Android 4.2 or 4.4.2
MT6572
Thank you very much !
Click to expand...
Click to collapse
?
https://www.needrom.com/download/lark-evolution-x2-7-3g-gps-android-jelly-bean-4-4-2/
joke19 said:
?
https://www.needrom.com/download/lark-evolution-x2-7-3g-gps-android-jelly-bean-4-4-2/
Click to expand...
Click to collapse
Thank you very much for your response. That was exactly the first ROM which i used, and the ROM which bricked the device. In scatter file and in the description is mentioned MT6582 as chip. My opinion was, this is mistake, so i edited the the scatter file to MT6572 to match my needs. But as i wrote upper, it was something different...