Okay so here goes I couldn't find the Verizon s3 forum so I am posting here Ok so no matter what I try I cannot flash anything with ODIN I was trying to install cf Auto root and then Odin failed so I searched for an answer and decided to try cynogen mod 11 ODIN fails again so I research says I need a custom recovery so I try to install twrp again fails so I try VRALEC again no dice no matter what I get this error in ODIN <ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRALEC.bootloader.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't really want a custom rom I just want to root the damn thing I have a Verizon SCH I535 galaxy S3 with stock jelly bean update
wxyzsupermod said:
Okay so here goes I couldn't find the Verizon s3 forum so I am posting here
Click to expand...
Click to collapse
The link for US / Canadian users is the very first post in section.
Related
Hi to all.
I have a galaxy gt i9100 an 4.0.3 on it. I flashed siyah kernel 5.0.1 with odin and no my phone does not boot. Its stock on screen displaying Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again.
I try to flash rom I9100XWLS8 with odin and i only get this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLS8_I9100XXLS8_I9100FOPLS3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I can`t flash anything with odin. pls help me.
Sorry for my english.
Re: [Q] Firmware upgrade encountered and issue
What state is the phone in now. What modes can you access?
Sent from my GT-I9100 using xda premium
Its stuck on screen displaying Firmware upgrade encountered and issue. I can access only download mode.
Re: [Q] Firmware upgrade encountered and issue
And your phone is no longer recognised by odin?
Sent from my GT-I9100 using xda premium
Odin is recognising my phone, but when i try to flash a rom i get this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLS8_I9100XXLS8_I9100FOPLS3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Re: [Q] Firmware upgrade encountered and issue
Ok re download the rom from samfirmware and try again. Not sure if it's a single PDA file or several CSC modem etc. Reflash.
Sent from my GT-I9100 using xda premium
I tried but i only get Complete(Write) operation failed
YUPEEEEEE:victory::victory::victory::victory::victory:
I got it.
I downloaded odin 1.3 and flashed successfully my phone.
Here is odin 1.3 if someone needs it.
View attachment Odin3_v1.3.rar
Well done mate.
Sent from my GT-I9100 using xda premium
HaHa congrats
I have tried everything posted above
In addition my model is GT-I9100G
doesnt go to download mode or recovery mode (earlier it was)
Earlier i was facing an issue that whenever i start it....it displayed "CWM 6.0.3.2" "WARNING : No file_contexts"
Please help
I'm getting the same problem on my sm-g318h trend 2 lite but it doesn't get fixed like his.
So i have a Galaxy S3 from Verizon. Earlier i tried to downgrade my phone to 4.1.2. So i got everything i need and i open odin thenwhen i click start it will only say fail.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.t ar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me. i have also broke my phone to where it says "Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again." and it wont boot up. If someone could help me and explain it to where noobs would understand it i would be very grateful.
benhix said:
So i have a Galaxy S3 from Verizon. Earlier i tried to downgrade my phone to 4.1.2. So i got everything i need and i open odin thenwhen i click start it will only say fail.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.t ar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me. i have also broke my phone to where it says "Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again." and it wont boot up. If someone could help me and explain it to where noobs would understand it i would be very grateful.
Click to expand...
Click to collapse
With the 4.3 update for the Galaxy S3 for Verizon came a new bootloader with Samsung Knox enabled which is a secure boot designed to prevent booting unsigned code. It also is designed to prevent people from circumventing the secure boot by downgrading firmware. As a result you have tripped the Knox security flag and bricked your device. However take a look at this guide http://forum.xda-developers.com/showthread.php?t=2581166
that hopefully will allow you to unbrick your device.
Sent from my SCH-I535 using XDA Premium 4 mobile app
Hello guys .. i bricked my s6 edge SM-925F.
All what i did was to run by odin a recovery .. after that all went wrong.. Can enter only in Download mode.. i put many recovery even stock on..many of them fail but i got 2 wich says Recovery is not seandroid enforcing.
If i try to install by odin stock room i got fail.. i downloaded like 3 official room from samobile.. same .. all fail dunno why..
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
P.S. : on download mode i got SV Rev. Check Fail Devicde : 3 Binary :1
Please anyone can help mee?
I have exactly the same issue as this, and I can't get into recovery. I have tried multiple stock versions all giving me the same error as you stated.
Try to flash only kernel and older TWRP, then try to restore your backup.
If you don't have backup, then you should know that the first "rule" of XDA is ALWAYS BACKUP, actually, it's mantra it's not a rule
Sent from my SM-G925F using Tapatalk
Search for G925FXXU3COI9 UK BTU version. I had same problem and that one worked for me
Hello
I rooted my galaxy s7 edge using this link http://forum.xda-developers.com/tmobile-s7-edge/how-to/how-to-root-s7-edge-t3410470.
i started having issues with the root, ex the phone would get stuck on the AT&T screen.
I tried going back to the stock image using this link https://boycracked.com/portfolio/galaxy-s7-edge-att-sm-g935a-firmware/.
Now i can no longer use Odin to flash anything, and i get this error dm-verity verification failed, int the recovery section.
Please Help!!!!!!!!
Thank you
update
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HELLO!
I tried to flash stock ROM on my GRAND 2 [SM-G7105]
the file is ok, but when i try to start it does that
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7105XWUANG2_G7105OLBANG1_G7105DXUANB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ROM is
G7105XWUANG2_G7105OLBANG1_G7105DXUANB1_HOME.tar.md5
Click to expand...
Click to collapse
As mentioned above,
Code:
VERSION 4.4.2
USING
Resurrection 5.7.4
If it helps
I really need your help guys!
if you have any solution (I PREFER CUSTOM ROM)
[but i haven't seen any custom ROM for my device with NFC]
thanks!
CM13 and CM14 no camera work no dual sim RIl fix slow smooth scroll system and app slow lanch app
Smaali said:
CM13 and CM14 no camera work no dual sim RIl fix slow smooth scroll system and app slow lanch app
Click to expand...
Click to collapse
Camera has ben fixed i made a patch for it ;0
fufle said:
HELLO!
I tried to flash stock ROM on my GRAND 2 [SM-G7105]
the file is ok, but when i try to start it does that
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7105XWUANG2_G7105OLBANG1_G7105DXUANB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ROM is
As mentioned above,
Code:
VERSION 4.4.2
USING
Resurrection 5.7.4
If it helps
I really need your help guys!
if you have any solution (I PREFER CUSTOM ROM)
[but i haven't seen any custom ROM for my device with NFC]
thanks!
Click to expand...
Click to collapse
You don't downloaded the right version download the one for your carrier and region
And don't try to downgrade knox will block you if you try to downgrade