When I go to install the rom JELLYWIZ or WIZZEDBEAN after I do Riboot Pelephone he restarts again and again What to do??
jellywiz: http://forum.xda-developers.com/showthread.php?t=2133763
I gave :crying:
ravidromy said:
When I go to install the rom JELLYWIZ or WIZZEDBEAN after I do Riboot Pelephone he restarts again and again What to do??
jellywiz: http://forum.xda-developers.com/showthread.php?t=2133763
I gave :crying:
Click to expand...
Click to collapse
Were you on "THE VERIZON (USA) JB CHRISTMAS LEAK KERNEL(either through dualboot or the leak)" before trying to install ?
Horgun said:
Were you on "THE VERIZON (USA) JB CHRISTMAS LEAK KERNEL(either through dualboot or the leak)" before trying to install ?
Click to expand...
Click to collapse
Can you help me install the rum just tell me what to do what it is and what it dualboot section if the verision tell me what to do all over again because I'm getting into
ravidromy said:
Can you help me install the rum just tell me what to do what it is and what it dualboot section if the verision tell me what to do all over again because I'm getting into
Click to expand...
Click to collapse
Are you using Safestrap 3.11 ? I'm not sure but i think dualboot is referring to: Leaving the Stock ROM intact and installing the other ROM on the other slots.
So, what model is your phone ? What is your current stock version ? If it's not the Christmas Leak one, you'll want to see this:
http://forum.xda-developers.com/showthread.php?t=2213740
Horgun said:
Are you using Safestrap 3.11 ? I'm not sure but i think dualboot is referring to: Leaving the Stock ROM intact and installing the other ROM on the other slots.
So, what model is your phone ? What is your current stock version ? If it's not the Christmas Leak one, you'll want to see this:
http://forum.xda-developers.com/showthread.php?t=2213740
Click to expand...
Click to collapse
Should install what you brought me?
Then install the rom?
My system version is: 982.124.14.xt910.vodafone.en.EU
My device was bought from Israel means he GSM.
i gave !!!!
I'm dying to install this rom.
ravidromy said:
Should install what you brought me?
Then install the rom?
My system version is: 982.124.14.xt910.vodafone.en.EU
My device was bought from Israel means he GSM.
i gave !!!!
I'm dying to install this rom.
Click to expand...
Click to collapse
Hi, i think i got it: http://forum.xda-developers.com/showthread.php?p=44067786
You install the ROM and then flash "Patch From 98.72.8-16 CDMA to 982.124.14-17 GSM"
Horgun said:
Hi, i think i got it: http://forum.xda-developers.com/showthread.php?p=44067786
You install the ROM and then flash "Patch From 98.72.8-16 CDMA to 982.124.14-17 GSM"
Click to expand...
Click to collapse
First install the rom JELLYWIZ and then this thing and then do Riboot?
ravidromy said:
First install the rom JELLYWIZ and then this thing and then do Riboot?
Click to expand...
Click to collapse
Yeah. But i'm only saying what i think will work based on these threads i read. I'm not sure of anything ok ?
Horgun said:
Yeah. But i'm only saying what i think will work based on these threads i read. I'm not sure of anything ok ?
Click to expand...
Click to collapse
There is much work Thank you very much. Help a lot
Related
after installing Lite'ning Rom v2.6 XWLP4 rom, everything works perfectly fine for me except i get force close when enabling "Sim Change Alert" under security options, i need this option very badly for security reasons....please help me....how to solve it...
cyrax2013 said:
after installing Lite'ning Rom v2.6 XWLP4 rom, everything works perfectly fine for me except i get force close when enabling "Sim Change Alert" under security options, i need this option very badly for security reasons....please help me....how to solve it...
Click to expand...
Click to collapse
reflash rom that fails flash stock rom .
jje
JJEgan said:
reflash rom that fails flash stock rom .
jje
Click to expand...
Click to collapse
i am not getting u....will u plz xplain....
cyrax2013 said:
i am not getting u....will u plz xplain....
Click to expand...
Click to collapse
Look in stock firmware thread and download stock rom which match with you current rom. Flash through odin, then flash Litening rom again
078gregory said:
Look in stock firmware thread and download stock rom which match with you current rom. Flash through odin, then flash Litening rom again
Click to expand...
Click to collapse
trying to do it now.....
Problem area
One the phone or two the rom .
Flash stock rom and test if OK then its the rom .
jje
cyrax2013 said:
trying to do it now.....
Click to expand...
Click to collapse
i dont have the official ics rom for india ( as it has not been released ) so will i flash it with stock 2.3.6 version first then lightning rom ??? will this work out ???
cyrax2013 said:
i dont have the official ics rom for india ( as it has not been released ) so will i flash it with stock 2.3.6 version first then lightning rom ??? will this work out ???
Click to expand...
Click to collapse
First, you need start to learn say THANK YOU, then you can ask questions.
078gregory said:
First, you need start to learn say THANK YOU, then you can ask questions.
Click to expand...
Click to collapse
i found out the solution......i installed samsungservice.apk which was not there in the rom for which i was facing the above error....i installed it n the problem got solved......
I had Custom ROM MIUI v 2.3.23 but when i wonted to update to version 2.3.3 so i tried. But i got an ERROR that said that the SD card could not be mounted, so i tried to reinstall the kernel. I used CF-Root-SGS2_XW_NEE_KI8-v4.3-CWM4.zip, and when it was finished the phone restarted but it stopped on the loading screen. What should i do?
Here is a picture of the original ROM (It is in Norwegian)
z-at-ox said:
I had Custom ROM MIUI v 2.3.23 but when i wonted to update to version 2.3.3 so i tried. But i got an ERROR that said that the SD card could not be mounted, so i tried to reinstall the kernel. I used CF-Root-SGS2_XW_NEE_KI8-v4.3-CWM4.zip, and when it was finished the phone restarted but it stopped on the loading screen. What should i do?
Here is a picture of the original ROM (It is in Norwegian)
Click to expand...
Click to collapse
do a clean install of miui (full wipe etc) , and why do you want to use the ki8 kernel?
pls thanks if i helped u.
cheers!
Is it the wrong kernel
snOwjAwk said:
do a clean install of miui (full wipe etc) , and why do you want to use the ki8 kernel?
pls thanks if i helped u.
cheers!
Click to expand...
Click to collapse
I have tried a clean install, and should I use another one? is the one I am using the wrong one?
z-at-ox said:
I have tried a clean install, and should I use another one? is the one I am using the wrong one?
Click to expand...
Click to collapse
nope it isnt but why dont you use the kernel which is installed with miui?
snOwjAwk said:
nope it isnt but why dont you use the kernel which is installed with miui?
Click to expand...
Click to collapse
Can you explame how I get the Kernel that follows whit MIUI? Do i get it when i install the ROM from Recovery mode?
snOwjAwk said:
nope it isnt but why dont you use the kernel which is installed with miui?
Click to expand...
Click to collapse
Thanks for the help, the reason that the system dident boot was that i tried to install a broken MIUI version. But thanks anywhy
z-at-ox said:
Can you explame how I get the Kernel that follows whit MIUI? Do i get it when i install the ROM from Recovery mode?
Click to expand...
Click to collapse
y you get the kernel which is included in the rom while ur flashing. reflash miui with ALL wipes and you should be fine.
cheers.
Stock ROM JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4THIS IS JB 4.1.2 FOR XT910TO INSTALL THIS ROM YOU NEED FLASH NEW VERIZON JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOTKERNEL
ROM
artur0588 said:
Stock ROM JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4THIS IS JB 4.1.2 FOR XT910TO INSTALL THIS ROM YOU NEED FLASH NEW VERIZON JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOTKERNEL
ROM
Click to expand...
Click to collapse
Right. I'll come back with results.
Debloated and GSM ported?
Thanks
heblu said:
Right. I'll come back with results.
Debloated and GSM ported?
Thanks
Click to expand...
Click to collapse
Yes, no verizon apps and GSM ready. Don't need GSM Patch, everything working.
artur0588 said:
Yes, no verizon apps and GSM ready. Don't need GSM Patch, everything working.
Click to expand...
Click to collapse
Great. In the next few hours I'll be back
once i boot up my device, it says
"Security test failure
Validation of cryptographic module failed, please restart"
i cant get pass that screen, what am i supposed to do after installing the rom
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Any noticeable changes ?
Like my work visit my channel once on YouTube
YouTube.com/user/Therazrguy
heblu said:
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Click to expand...
Click to collapse
hmm im installing it on rom 2, and rom 1 is JBX D-wiz
am i supposed to flash back to verizon jb first before installing ?
danieltang34 said:
once i boot up my device, it says
"Security test failure
Validation of cryptographic module failed, please restart"
i cant get pass that screen, what am i supposed to do after installing the rom
Click to expand...
Click to collapse
You forgot flash new kernel
heblu said:
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Click to expand...
Click to collapse
Hi, cannot download KERNEL, can you please attached it in another way, tks in advance.
danieltang34 said:
hmm im installing it on rom 2, and rom 1 is based JBX D-wiz
am i supposed to flash back to verizon jb first before installing ?
Click to expand...
Click to collapse
first reboot to BMM recovery and flash kernel from OP. then wipe all and install rom
Lzto1320 said:
Hi, cannot download KERNEL, can you please attached it in another way, tks in advance.
Click to expand...
Click to collapse
I have attached in OP
artur0588 said:
i have attached in op
Click to expand...
Click to collapse
tks so much for your work! Great man!!!
Hi, some noobie here, just wanna make sure the following steps are correct before i try, really scared if got bricked:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
6. Profit?
Or anything else should i do? Thanks for any suggestion. Sorry if already asked frequently..
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
shakti15 said:
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
This is from the soak test I believe.
hansip87 said:
Hi, some noobie here, just wanna make sure the following steps are correct before i try, really scared if got bricked:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
6. Profit?
Or anything else should i do? Thanks for any suggestion. Sorry if already asked frequently..
Click to expand...
Click to collapse
al good
after you have backup CID and your kernel you can restore them just to be sure
you can flash rom in second system (webtop partition). To switch, reboot into BMM, flash desired kernel, reboot
shakti15 said:
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
yes
heblu said:
yes
Click to expand...
Click to collapse
i have a sily question. can we dual boot this rom and flash kernel separately becouse i donnt want to lose my stock rom ics and all apps.
one more question is there a way to backup my whole rom and restore as it is when i want .?
one question more ics will not work on jelly bean kerne.?
thanx in advance for answer my silly question
Screenshots?
This ROM is like the Verizon ROM but without the Verizon apps and for XT910 right? Is the original one, with motoblur?
PatrickDziura said:
Screenshots?
This ROM is like the Verizon ROM but without the Verizon apps and for XT910 right? Is the original one, with motoblur?
Click to expand...
Click to collapse
Yes, original.
I have a MyPhone A888 and it is version 4.0.4. My question is, can I install a custom rom that is 4.1.2? I was planning on installing this (Yonip A888 4.1.2 V5): http://forum.frandroid.com/topic/142780-rom-yonip-a888-412-v5-28042013/, which I found on this list of A888 roms: http://forum.xda-developers.com/showthread.php?p=41729090. So can I install it? Or should I stick to 4.0.4 custom roms? Thanks!
Likach said:
I have a MyPhone A888 and it is version 4.0.4. My question is, can I install a custom rom that is 4.1.2? I was planning on installing this (Yonip A888 4.1.2 V5): http://forum.frandroid.com/topic/142780-rom-yonip-a888-412-v5-28042013/, which I found on this list of A888 roms: http://forum.xda-developers.com/showthread.php?p=41729090. So can I install it? Or should I stick to 4.0.4 custom roms? Thanks!
Click to expand...
Click to collapse
watch the instrction
shiva4849 said:
watch the instrction
Click to expand...
Click to collapse
Huh? So can I or can I not? Sorry I am a complete noob
Likach said:
Huh? So can I or can I not? Sorry I am a complete noob
Click to expand...
Click to collapse
You can install any rom of any version you want but it MUST be for your exact device.
TenKoX said:
You can install any rom of any version you want but it MUST be for your exact device.
Click to expand...
Click to collapse
Oh okay. So just to be extra clear, I can install a 4.1.2 Rom on my 4.0.4 phone right?
Likach said:
Oh okay. So just to be extra clear, I can install a 4.1.2 Rom on my 4.0.4 phone right?
Click to expand...
Click to collapse
Yes. The version doesn't matter. You can be sure to install a ROM for YOUR device (if not you can get a hard-brick and this is not good...).
Remember to do FULL WIPE when you change version.
Any other doubts just tell me
TenKoX said:
Yes. The version doesn't matter. You can be sure to install a ROM for YOUR device (if not you can get a hard-brick and this is not good...).
Remember to do FULL WIPE when you change version.
Any other doubts just tell me
Click to expand...
Click to collapse
Thanks! Gonna start installing now.
I never had this problem with this rom and i don't know whyi'm getting this now:
I revert to stock rom with odin and I install the rom how Humberto said in the thread of Excalibur v6.1 and the phone boot normally, BUT when i turn off and turn on the phone I stuck at model screen... Can someone help me?
40k online and nobody want to help me...
mathhqs said:
I never had this problem with this rom and i don't know whyi'm getting this now:
I revert to stock rom with odin and I install the rom how Humberto said in the thread of Excalibur v6.1 and the phone boot normally, BUT when i turn off and turn on the phone I stuck at model screen... Can someone help me?
40k online and nobody want to help me...
Click to expand...
Click to collapse
Just Flash Stock via Odin .
Hitesh2626 said:
Just Flash Stock via Odin .
Click to expand...
Click to collapse
But I want to use Excalibur -_-
mathhqs said:
But I want to use Excalibur -_-
Click to expand...
Click to collapse
After Flashing Stock then again Flash that ROM ,if the Problem Still Exist then Post these Problem to ROM thread and Contact Dev of that ROM.
Hitesh2626 said:
After Flashing Stock then again Flash that ROM ,if the Problem Still Exist then Post these Problem to ROM thread and Contact Dev of that ROM.
Click to expand...
Click to collapse
I said the problem on the rom thread but he didn't help me
mathhqs said:
I said the problem on the rom thread but he didn't help me
Click to expand...
Click to collapse
So any one can't help out you because Dev can probably know how to solve it