guys I have galaxy grand quattro my vold.fstab code Is:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
#storage_struct = series, "/mnt/sdcard/extStorages"
#storage_struct = parallel
{
supported_exfat = yes
android_secure_containers = enable
}
dev_mount sdcard /storage/extSdCard auto /devices/platform/msm_sdcc.1/mmc_host/mmc1/
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sda /storage/UsbDriveA auto /devices/platform/msm_hsusb_host/usb
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdb /storage/UsbDriveB auto /devices/platform/msm_hsusb_host/usb
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdc /storage/UsbDriveC auto /devices/platform/msm_hsusb_host/usb
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdd /storage/UsbDriveD auto /devices/platform/msm_hsusb_host/usb
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sde /storage/UsbDriveE auto /devices/platform/msm_hsusb_host/usb
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdf /storage/UsbDriveF auto /devices/platform/msm_hsusb_host/usb
#EOF
SO please tell me where should i change the code to swap memory pls pls pls i beg u ........
Thanks in advance
Related
My phone is GT-I9260 8G,actually the available internal storage only 3.4G
So i got a 32GB TF card and i try to modify the vold.fstab to swap internal/external storage card,but failed
Here is the original file structure :
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
#storage_struct = series, "/storage/sdcard/extStorages"
#storage_struct = parallel
{
supported_exfat = yes
}
dev_mount sdcard /storage/extSdCard auto /devices/platform/omap/omap_hsmmc.0/mmc_host/mmc1
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sda /storage/UsbDriveA auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb1
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdb /storage/UsbDriveB auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb1
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdc /storage/UsbDriveC auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb1
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdd /storage/UsbDriveD auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb1
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sde /storage/UsbDriveE auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb1
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdf /storage/UsbDriveF auto /devices/platform/omap/musb-omap2430/musb-hdrc/usb1
#EOF
------------------------------------------------------------------
I modify this
#storage_struct = series, "/storage/sdcard/extStorages"
#storage_struct = parallel
{
supported_exfat = yes
}
dev_mount sdcard /storage/extSdCard auto /devices/platform/omap/omap_hsmmc.0/mmc_host/mmc1
TO
#storage_struct = series, "extStorages/storage/sdcard"
#storage_struct = parallel
{
supported_exfat = yes
}
dev_mount extSdCard /storage/sdcard auto /devices/platform/omap/omap_hsmmc.0/mmc_host/mmc1
-------------------------------------------------
BUT it's not work
Could you show me the right code, help me please s
Appreciation~~
anyone give me a hand !!!:good:
i am alwasys waitting here.......................
I'm Koreans.
Galaxy Grand Korean version being used.
Please internal swap external
file is vold.fstab.
I are not familiar with English.
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
#storage_struct = series, "/storage/sdcard/extStorages"
#storage_struct = parallel
{
supported_exfat = yes
android_secure_containers = enable
}
dev_mount sdcard /storage/extSdCard auto /devices/platform/s3c-sdhci.2/mmc_host/mmc1/
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sda /storage/UsbDriveA auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdb /storage/UsbDriveB auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdc /storage/UsbDriveC auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdd /storage/UsbDriveD auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sde /storage/UsbDriveE auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdf /storage/UsbDriveF auto /devices/platform/s5p-ehci
#EOF
Hello, I knew that a change in the vold.fstab can allow the external sd card to be used as internal storage. However, the content of the file varies from device. I am using the Note 2 N7100 running android revolution version 18 and I would like to know what should I change in order to do the storage exchange.
And this is the content of the vold.fstab for my device:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
#storage_struct = series, "/storage/sdcard/extStorages"
#storage_struct = parallel
{
supported_exfat = yes
}
dev_mount sdcard /storage/extSdCard auto /devices/platform/s3c-sdhci.2/mmc_host/mmc1/
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sda /storage/UsbDriveA auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdb /storage/UsbDriveB auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdc /storage/UsbDriveC auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdd /storage/UsbDriveD auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sde /storage/UsbDriveE auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdf /storage/UsbDriveF auto /devices/platform/s5p-ehci
#EOF
Sent from my GT-N7100 using XDA Premium 4 mobile app
Sent from my GT-N7100 using XDA Premium 4 mobile app
Hi all
i just swapped my internal mem with external.My device is samsung galaxy fame 6812
ive done it by editing vold.fstab file in system/etc.The file content is:
# Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
{
supported_exfat = no
}
#dev_mount sdcard /storage/sdcard auto /devices/platform/mmc_host/mmc2
dev_mount sdcard /storage/extSdCard auto /devices/platform/sdhci.0/mmc_host/mmc2
#usb host device
{
media_type = usb
supported_exfat = no
}
dev_mount sda /storage/UsbDriveA auto /devices/platform/dwc_otg/usb1
#usb host device
{
media_type = usb
supported_exfat = no
}
dev_mount sdb /storage/UsbDriveB auto /devices/platform/dwc_otg/usb1
#usb host device
{
media_type = usb
supported_exfat = no
}
dev_mount sdc /storage/UsbDriveC auto /devices/platform/dwc_otg/usb1
#usb host device
{
media_type = usb
supported_exfat = no
}
dev_mount sdd /storage/UsbDriveD auto /devices/platform/dwc_otg/usb1
#usb host device
{
media_type = usb
supported_exfat = no
}
dev_mount sde /storage/UsbDriveE auto /devices/platform/dwc_otg/usb1
#usb host device
{
media_type = usb
supported_exfat = no
}
dev_mount sdf /storage/UsbDriveF auto /devices/platform/dwc_otg/usb1
i changes sdcard to extSdCard and viceversa
after swapping when the phone reboots, and many system app started to crashing like taskmanager, myfiles, android media......etc
I replaced the backup vold.fstab and switched back.Why the swapping not not working?? (i had all the files from internal mem to external sdcard)
pls help me....
Hello
i have a i9105p with 4.2.2 and i want to swap internal sd memory with external sd card to get more space. I tried any vold.fstab from this forum without success (some times the phone stucked at samsung logo at boot).
Original vold.fstab:
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
{
supported_exfat = yes
}
#dev_mount sdcard /storage/sdcard auto /devices/platform/mmc_host/mmc2
dev_mount sdcard /storage/extSdCard auto /devices/platform/sdhci.3/mmc_host/mmc2
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sda /storage/UsbDriveA auto /devices/platform/dwc_otg/usb1
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdb /storage/UsbDriveB auto /devices/platform/dwc_otg/usb1
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdc /storage/UsbDriveC auto /devices/platform/dwc_otg/usb1
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdd /storage/UsbDriveD auto /devices/platform/dwc_otg/usb1
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sde /storage/UsbDriveE auto /devices/platform/dwc_otg/usb1
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdf /storage/UsbDriveF auto /devices/platform/dwc_otg/usb1
Can you help me to modify it? Thanks in advance!!!
bump...nobody?