Heii this is a DatabaseCollectionThread for
JustArchi's Kitchen
If you get this message while building your PROJECT folder:
"This model does not yet exist in our database. Please fill your kernel path manually"
"Example for I9300/m0 (Samsung Galaxy S3): /dev/block/mmcblk0p5"
"Example for N9005/hlte (Samsung Note 3): /dev/block/mmcblk0p14"
"Example for E960/mako (LG Nexus 4): /dev/block/platform/msm_sdcc.1/by-name/boot"
"MAKE SURE THAT THE PATH IS CORRECT, OVERWRITING WRONG PATHS MAY LEAD TO SOFT AND HARD BRICKS"
"Kernel path for your device: "
or
"This model does not yet exist in our database. Please fill your modem path manually"
"Please notice that some models are not supporting flashing a modem via recovery, in such case you should use generic 'NULL' word in this question"
"Example for I9300/m0 (Samsung Galaxy S3): /dev/block/mmcblk0p7"
"Example for N9005/hlte (Samsung Note 3): NULL"
"Example for E960/mako (LG Nexus 4): /dev/block/platform/msm_sdcc.1/by-name/modem"
"MAKE SURE THAT THE PATH IS CORRECT, OVERWRITING WRONG PATHS MAY LEAD TO SOFT AND HARD BRICKS"
"Modem path for your device: "
you're on the right place!!!
Downloads:
Samsung Galaxy Note II
GT-N7100
GT-N7105
Installation instructions:
1. Download the .zip file for your device
2. Open the archive
3. Save the folder(s) to: /product/
4. Open ArchiKitchen and try it again
Credits:
JustArchi for ArchiKitchen
Ameer Dawood for the paht's and details
androidsupersu said:
Downloads:
Samsung Galaxy Note II
GT-N7100
GT-N7105
Click to expand...
Click to collapse
hi archi i really appreciate your work
but im stucked here...
i ve a moto g 1st gen xt1032
Detected ROM model: falcon
This model does not yet exist in our database. Please fill your kernel path manually
i still searching on the web on your thred but i cant find nothing and i dont want to mess up everything
can you help me ?
---------- Post added at 06:53 PM ---------- Previous post was at 06:30 PM ----------
reav said:
hi archi i really appreciate your work
but im stucked here...
i ve a moto g 1st gen xt1032
Detected ROM model: falcon
This model does not yet exist in our database. Please fill your kernel path manually
i still searching on the web on your thred but i cant find nothing and i dont want to mess up everything
can you help me ?
Click to expand...
Click to collapse
should be something like that:
/dev/block/mmcblk0p31
do you confirm that ?
Is it possible to get a database for Samsung Galaxy S4 mini LTE (serranolte) GT-i9195 ?
Best regards,
Bruno
so whats this now? a database with only 2 entries for samsung?
i need kernel path for ZTE Blade A452. i am really trying to build a custom rom but having to deal with half-working tools is pretty annoying.
Related
Hydis HVA37WV1
http://www.hydis.com/eng/03_product...=Mobile&openBox=0&subBox=null&openSubBox=null
DATASHEET :
https://rapidshare.com/files/4178364448/hva37wv1-m01_preliminary_product_spec__20110218.pdf
HOPE NOW WE HAVE ANDROID ON S8530!!!
Thanks, now I see that its IC display driver is
LG4573
http://www.trulydisplays.com/tft/driveric/Driver IC LG4573.pdf
not NT35510 like in Hydis panels in Galaxy series, so we must change some code.
Can you try to find NT35510 datasheet? It's not mandatory, but I would like to take a look into it also.
NT35510 Datasheet
Hi @Rebellos.
I think I found the
Sorry my bad English
rebellos said:
thanks, now i see that its ic display driver is
lg4573
http://www.trulydisplays.com/tft/driveric/driver ic lg4573.pdf
not nt35510 like in hydis panels in galaxy series, so we must change some code.
can you try to find nt35510 datasheet? It's not mandatory, but i would like to take a look into it also.
Click to expand...
Click to collapse
geme difficult job !!!
But find some thing !!
You can find kernel and driver on Huawei Ideos X5 U8800 mobile last version
http://pastebin.com/zQ6uAbm2
Kernel Source :
http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=Mzg2OTQ=
@Up:
This one I found already, but thx.
byercanx said:
Hi @Rebellos.
I think I found the
Sorry my bad English
Click to expand...
Click to collapse
Hey, thanks, but it isn't datasheet of NT35510, but only short schema of some LCD mounted with NT35510.
Maybe, the LCD of the Samsung I9003 (European version) is the same. The source code with drivers for it, it is here... h t t p s ://opensource.samsung.com/
There is various sources codes with drivers that if we mix it, we can install Android to the S8530.
Sorry for my english.
http://forum.xda-developers.com/showpost.php?p=18522481&postcount=41
Maybe usefull.
But at the moment I can't see this...
Need more details, then I could compare S8500 and S8530.
Best Regards
I've already got datasheet for LCD controller (thanks to Tigrouzen), that's all we need. Now I need some time to get straight with more important jobs and this will be done for sure.
There's Galaxy Nexus Dump but not kernel
porting android on s8530
hi, i'm not a dev but i think about something... Instead of porting a galaxy s rom, why not porting a nexus s rom? The nexus s has the same hardware as the wave 2 , the nexus s sold in europe have SCLCD screens like the wave 2 unlike they have 4".
Foxhynter said:
hi, i'm not a dev but i think about something... Instead of porting a galaxy s rom, why not porting a nexus s rom? The nexus s has the same hardware as the wave 2 , the nexus s sold in europe have SCLCD screens like the wave 2 unlike they have 4".
Click to expand...
Click to collapse
We are taking SCLCD driver from Nexus S, that it has got similiar panel, but different controller, so it still need alot of work on control sequences anyway.
please helpppp how to install android on samsung s8530?
hossamnasser said:
please helpppp how to install android on samsung s8530?
Click to expand...
Click to collapse
There is currently no way to get android on the s8530. Hence why this topic is here. Please use the search function before posting.
Posted from android on wave.
Someone is able to find S8600 related documents?
Or all in wait position...
Can someone search for more infos...
Google for instance.
How hard it is to integrate Display Driver?
Are changes "few Bytes" or few MB ?
No idea.
Bootloader contains Display Driver...
Maybe someone can please explain few parameters in ELF files... DDLC2 India INU Version have these additional Bootloader ELF files...
Now less differences in adresses... so maybe now more chance to identify some Display related...
Best Regards
How hard is it to integrate display driver?
All depends what's already done. In I9000->S8500 driver port it's actually matter of changing few lines to get LCD working (with initialization by SBL, haven't bypassed this yet)
Though for S8530 Oleg had to write it basing on driver for similiar lcd but for TI OMAP CPU. So it was bunchload of work, but it's done and working. So nothing's impossible, it's always matter of time and will or money (yea, one of the 2 last).
http://forum.xda-developers.com/showpost.php?p=24872058&postcount=159
Can someone please try and report?
Thanx.
Please caution. NOT tested!
Btw...
http://code.google.com/p/badadroid-kernel/source/detail?r=ba495cc7bae67794add1387e94a580bd35101f06
Thank you very much nbates66
Best Regards
There is progress to LCD Driver's? : Прохладно:
About Screenlock...
Someone knows M210S Display data?
Because on my S8500 M210S Firmware runs correct... I can see all and Screen awake after pressing Lock key...
Thanks, but it's unnecessary - difference is obvious - S8500 is waking up AMOLED screen based on TL2796 chip, for which we've got complete driver from I9000. S8530 is waking up SCLCD screen based on damned LG4573, and only reference driver we've got for it is some old omap phone. There's trouble with configuring the screen after putting it out of the reset, causing it not power on properly.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=39210275&postcount=1200
Best Regards
---------- Post added at 07:08 PM ---------- Previous post was at 06:23 PM ----------
This I can find in S8500 AND S8530 AND M210S Firmware + Boot... ELF...
Code:
LDI_TL2796
lcd/LDI_TL2796_Lismore.c
LDI_TL2796_Lismore.o
LDI_TL2796_Lismore.h
LCD_Driver.h
LDI_TL2796_Power_On
LDI_TL2796_Power_Off
I can not find "LG4573" as test String in Boot ELF nor in apps_compressed.bin...
For Wave 2 (S8530) Samsung used very smart this:
Code:
lcd/LDI_TL2796_[B]WAVE37[/B].h
Anyway...
Maybe deeper investigation in ELF files from INU... indian Firmware, because S8530 + S8500 ELF files available... for compare...
Now I will try to find these Chips... if visible in schematics or Pics...
Best Regards
JVLC2 TUR Both S8500 and S8530 also has ELF files
and BTW if you google "LDI_TL2796" this then you can find thishttp://pastebin.com/ux191gyQ
LDI_TL2796 : LDI_S6E63M0_Power_On [hwrev > S8200_UNIV_B7]
LDI_TL2796 : LDI_S6E63M0_Power_On [hwrev >= S8200_REV03]
Click to expand...
Click to collapse
Edit : Seems these strings from S8500 XXJB6
any progress
Any progress on the s8530 lockscreen wake up problem its the only thing that stopping us from using android on my wave 2, 24 X 7
Developers really appreciate all your work
Im getting this message when I try to use S note app........ polaris engine v3.51 build date 10-4-12 target name android_full_java target model sch-1605 this is a model which the library does not support contact infraware Inc ... noticed it after getting google wallet running using the guide on here, which works great but now this .... Im rooted on stock L4 anybody got any idea? .... Thanks
ebtank said:
Im getting this message when I try to use S note app........ polaris engine v3.51 build date 10-4-12 target name android_full_java target model sch-1605 this is a model which the library does not support contact infraware Inc ... noticed it after getting google wallet running using the guide on here, which works great but now this .... Im rooted on stock L4 anybody got any idea? .... Thanks
Click to expand...
Click to collapse
Did you change your build prop values back to stock after getting wallet going?
Sent from my Note II
Hi,
I have installed ubuntu touch on my samsung galaxy s3 using the help of the following link :
http://forum.xda-developers.com/showthread.php?t=2315397
I want to transfer a precompiled package (that i ve cross compiled on my desktop) to the phone.
Is there any way of doing that??
Thanks
You'll have better luck here:
http://forum.xda-developers.com/forumdisplay.php?f=2068
99.9% of S3 users don't have ubuntu running
[Q&A] [UPDATE:2014/05/17][ROM][UNOFFICIAL]CM 10.1 Android 4.2.2 for GT-S5282. Tester
Q&A for [UPDATE:2014/05/17][ROM][UNOFFICIAL]CM 10.1 Android 4.2.2 for GT-S5282. Testers only!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [UPDATE:2014/05/17][ROM][UNOFFICIAL]CM 10.1 Android 4.2.2 for GT-S5282. Testers only!. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
when wil it finish booting?
solution for network error !!!!!!!!
Is there any solution of junkybean pre-
alpha 1.1 network error ??????
Please give me a solution !!!!!!!
we are gonna fix cm tats it
Iam pissed off by this device even the devices below us have cm 11 ahhhh!! Its disgusting ...
All we have to fix is
1) network problem (ril file ) n one guy had made its fix n we r not even testing tat
2) it doesn't read SD card ...
3)n final error is camera (use 3 rd party app)
We gonna fix tat in any cost .........KKK I am new here BT I know this device from 2.5 years so as I said I cannot use any stock based ROM anymore ..... I request every devloper to concentrate in cm ....
#T3 , shade SK, akshay ,bhargav, indo devs every one here ,
We gotta do did..
Hit thanxx if u liked....
akash knox said:
Iam pissed off by this device even the devices below us have cm 11 ahhhh!! Its disgusting ...
All we have to fix is
1) network problem (ril file ) n one guy had made its fix n we r not even testing tat
2) it doesn't read SD card ...
3)n final error is camera (use 3 rd party app)
We gonna fix tat in any cost .........KKK I am new here BT I know this device from 2.5 years so as I said I cannot use any stock based ROM anymore ..... I request every devloper to concentrate in cm ....
#T3 , shade SK, akshay ,bhargav, indo devs every one here ,
We gotta do did..
Hit thanxx if u liked....
Click to expand...
Click to collapse
I also want to say that. Lets give another try to fix it. RIL will be our top priority.
I have many views to share, I have been trying to fix this (whatever can be done by build.prop)
Btw the device is not even 2 years old
Tried to take ril file of other rom
kkk i tried ....
I tried to copy ril files BT it failed n tried build prop edit too now me.,Anand Roy (HTC xplorer dev)
Trying to fix this issue
Avinab plz contact me in Facebook (knox levecticus akash)
Avinab can u replace whole networking frameworks n files ..... Taking it from other cm ROMs of same device like galaxy young n other Samsung devices......
Contact me plzzzz (iam blkd)
I tried modding build.prop.
It now detects SIM. Though network remains unfixed
---------- Post added at 11:47 PM ---------- Previous post was at 11:12 PM ----------
akash knox said:
kkk i tried ....
I tried to copy ril files BT it failed n tried build prop edit too now me.,Anand Roy (HTC xplorer dev)
Trying to fix this issue
Avinab plz contact me in Facebook (knox levecticus akash)
Avinab can u replace whole networking frameworks n files ..... Taking it from other cm ROMs of same device like galaxy young n other Samsung devices......
Contact me plzzzz (iam blkd)
Click to expand...
Click to collapse
Why don't you attach RIL file which you are claiming to be fixed?
Also, logcat says
Code:
D/AT_Distributor( 108): ConnectToRil()
D/AT_Distributor( 108): try to connect RIL
D/AT_Distributor( 108): connection success
D/AT_Distributor( 108): Send Msg [ ATD > RIL ] 4 bytes <>
we will do it
Like we have got similar mobiles of same specs like galaxy y
Why can't we take ril of tat device' s cm ROM avinab n all developer here try this atleast we need one cm ROM fr our device which is fully stable n any new fixes must be uploaded which might be a relief for us avinab keep trying its good tat it reads sim plzz upload fix here ..... Hope u will fix it soon.:-crossed: edit any fixes u have discovered plzz...
akash knox said:
Like we have got similar mobiles of same specs like galaxy y
Why can't we take ril of tat device' s cm ROM avinab n all developer here try this atleast we need one cm ROM fr our device which is fully stable n any new fixes must be uploaded which might be a relief for us avinab keep trying its good tat it reads sim plzz upload fix here ..... Hope u will fix it soon.:-crossed: edit any fixes u have discovered plzz...
Click to expand...
Click to collapse
Their RIL architecture and our architecture is different.
Developer says that this CM is built on a faulty device tree, so RIL fix is near impossible job.
However, Sambathpr or someone with similar username he once claimed he had fixed RIL by build prop tweaks
SIM Detection
In your build.prop add these lines in system properties section
Code:
rild.libpath=/system/lib/libreference-ril.so
ro.ril.transmitpower=true
Phone should now detect SIM but no network.
I was studying CM of Samsung Galaxy Pocket Neo (the nearest to ours), and observed these
There rild.libpath refers to a file called libbrcm-ril.so, whereas in our case its libreference-ril.so
They have 4 RIL files in their library
libbrcm-ril.so (800kB)
libreference-ril.so (29kB)
libril.so (14kB)
libsecril-client.so (13kB)
Whereas we have 3 RIL files
libreference-ril.so (650kB or so)
libril.so (14kB)
libsecril-client.so (13kB)
I can't say that we have any file missing (I found these 3 in the stock as well), nor is that we are connected to wrong RIL file (logcat says RIL is connected successfully).
So I am not sure here what I can do. Maybe if anybody can aid me in decompiling those files, I may understand the code and can guess what's going around. I will expect Java based coding there, but, well, I do know programming (C++ to be specific), so I may understand what's going around. Also those files are binary and text editors cannot read it unlike build.prop
hey lets make a new cm
kkkk guys open a new thread n oh yeah hell of this device we will sure make it physch half n avinab plzz do it one cm please ............ I can't even reply coz I am junior member ...... plzzz give ur contacts in fb n what's app plzzz
n avinab how to know that ur code is working or not .. I tried BT no results n device tree ka link
error on Google play service
Google is npt supporting needs google play service, and it stop suddenly showing errors.....
I need help ,need to fix it too....
hı ı flush the rom but ıt stay ın boot
i'm fix it
the link will be coming soon................
khaledghoneem said:
the link will be coming soon................
Click to expand...
Click to collapse
Its not a great idea to boast something without any acceptable proof. If you have fixed it, why not share a screenshot.
AvinabaDalal said:
Its not a great idea to boast something without any acceptable proof. If you have fixed it, why not share a screenshot.
Click to expand...
Click to collapse
Fix : sim only and you can only use one sim
Getdown fr fix : wifi dont work
Un fix : bluetooth and usb and etc
What i'm try to fix now
USB
Soon. I'll upload cm10.1 for star s5282
khaledghoneem said:
Fix : sim only and you can only use one sim
Getdown fr fix : wifi dont work
Un fix : bluetooth and usb and etc
What i'm try to fix now
USB
Soon. I'll upload cm10.1 for star s5282
Click to expand...
Click to collapse
so u r saying u have fixed ril? we don't care no. of sims. Great work bro.
Please push device tree to github.
And upload ril fixed build soon.
Thanks
khaledghoneem said:
Fix : sim only and you can only use one sim
Getdown fr fix : wifi dont work
Un fix : bluetooth and usb and etc
What i'm try to fix now
USB
Soon. I'll upload cm10.1 for star s5282
Click to expand...
Click to collapse
Request you to post ScreenShot of
1. Notification shade (the part which DOES not contain quick toggles).
2. Lock Screen
3. About Phone
Please don't get me wrong, CM development was started in 2013, but even high profile devs could not bring stability in it. So many had thought that custom rom hopes are over, so its hard to believe anyone who claims that cm has got its ril fixed.
So if you post these screenshots, we can get a better idea and believe in you.
Truly speaking, we too urge for CM.
I am ready to offer my full support (whatever I can) but not until April.
Hoping to hear from you ASAP.
khaledghoneem said:
Fix : sim only and you can only use one sim
Getdown fr fix : wifi dont work
Soon. I'll upload cm10.1 for star s5282
Click to expand...
Click to collapse
Even If 1 sim is fixed Its Great News, 2 Sims couldn't work anyways as CM 10.1 doesnt support Dual SIMs, though If we can make cm 10.1 work, I suppose maybe it could be upgraded to 10.2 which supports multi sim from what I know.. Anyways I am taking the fix news with a pinch of salt.. but still iff its True Great Work @khaledghoneem
AvinabaDalal said:
Request you to post ScreenShot of
1. Notification shade (the part which DOES not contain quick toggles).
2. Lock Screen
3. About Phone
Please don't get me wrong, CM development was started in 2013, but even high profile devs could not bring stability in it. So many had thought that custom rom hopes are over, so its hard to believe anyone who claims that cm has got its ril fixed.
So if you post these screenshots, we can get a better idea and believe in you.
Truly speaking, we too urge for CM.
I am ready to offer my full support (whatever I can) but not until April.
Hoping to hear from you ASAP.
Click to expand...
Click to collapse
my prove
and another happy news i'm fix WI-FI again
and add the original Diller came with the original cm 10.1 android 4.2.2 for GT-S5282
Hi guys
I've been trying to build AOSP images for my Z3TC 16GB Wifi by following Sony's guide.
The problem is, when I get to the building part and select scorpion_windy, I always get the same error telling me I don't have the product spec for this device. (see attached screenshot)
I'm pretty sure I do though as I am synced wih Sony's repo and the Scorpion folder is present in /vendor/sony...
Has anyone here encountered this problem before ?
I really wanted to try some of that "Milkshake"(?) goodness
Thank you in advance for your help !
EDIT : Sorry, forgot to check the box that says this thread's a question. Hope you didn't get your hopes up too much when you read the title !