Does anyone know how I could lock into LTE only mode? The phones I am using (T-Mobile & AT&T S5) is not rooted. Nor am I allowed to root it. I've search through all of the debug menus and its seems like I can only lock into certain bands. I havent had any success sending AT commands either....but I am not sure this would still even be capable as I do not know the Qualcomm AT commands to lock into a certain RAT.
Try this: Dial *#*#4636#*#*, look for LTE only option and select that. Hit home to clear out of dialer. Hope this works!
Sent from my GT-N7105 using xda premium
smooth65 said:
Try this: Dial *#*#4636#*#*, look for LTE only option and select that. Hit home to clear out of dialer. Hope this works!
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
This works on most phones, but not the S5 for some reason. It must be another code.
aooga said:
This works on most phones, but not the S5 for some reason. It must be another code.
Click to expand...
Click to collapse
Correct. That code will not work. I have tried that one. I have also looked through the menus of *#197328640# and *#2263#
ducksauce88 said:
Correct. That code will not work. I have tried that one. I have also looked through the menus of *#197328640# and *#2263#
Click to expand...
Click to collapse
I'll be following this thread. Hopefully someone figures it out. None of the apps on the play store work either since they all pretty much redirect to the *#*#4636*#*# code anyway.
EDIT: Oops..gave you a free thanks. Oh well
aooga said:
I'll be following this thread. Hopefully someone figures it out. None of the apps on the play store work either since they all pretty much redirect to the *#*#4636*#*# code anyway.
EDIT: Oops..gave you a free thanks. Oh well
Click to expand...
Click to collapse
lol. free thanks returned!
Ok, so I figured it out. If you dial *#2263# and select "LTE Band Preference" it will lock it into LTE only (I am using an unlocked T-Mobile phone, not sure if that makes a difference). I have confirmed this via AT Commands. I have a new question. I have queried what bands can be selected. Does anyone know which one would be for LTE Band 17? What is "41.WLAN_US_5000"...
at$QCbandpref?
$QCBANDPREF:
"1.BC0_A"
"2.BC0_B"
"3.BC0"
"4.BC1"
"5.BC3"
"6.BC4"
"7.BC5"
"8.GSM_DCS_1800"
"9.GSM_EGSM_900"
"10.GSM_PGSM_900"
"11.BC6"
"12.BC7"
"13.BC8"
"14.BC9"
"15.BC10"
"16.BC11"
"17.BC12"
"18.BC14"
"19.BC15"
"20.BC16
"21.GSM_450"
"22.GSM_480"
"23.GSM_750"
"24.GSM_850"
"25.GSM_RGSM_900"
"26.GSM_PCS_1900"
"27.WCDMA_I_IMT_2000"
"28.WCDMA_II_PCS_1900"
"29.WCDMA_III_1700 "
"30.WCDMA_IV_1700"
"31.WCDMA_V_850"
"32.WCDMA_VI_800 "
"33.WCDMA_VII_2600"
"34.WCDMA_VIII_900"
"35.WCDMA_IX_1700"
"36.WLAN_US_2400 "
"37.WLAN_JAPAN_2400"
"38.WLAN_EUROPE_2400"
"39.WLAN_SPAIN_2400"
"40.WLAN_FRANCE_2400 "
"41.WLAN_US_5000"
"42.WLAN_JAPAN_5000"
"43.WLAN_EUROPE_5000"
"44.WLAN_SPAIN_5000"
"45.WLAN_FRANCE_5000 "
"46.Any"
OK
If anyone is interested, and using xposed, I created an xposed module that allows you to have a widget on your homescreen which easily enables you to change the network mode of choice.
41.WLAN_US_5000 -- that is 5Ghz Wifi (802.11ac/n)
ducksauce88 said:
Ok, so I figured it out. If you dial *#2263# and select "LTE Band Preference" it will lock it into LTE only (I am using an unlocked T-Mobile phone, not sure if that makes a difference). I have confirmed this via AT Commands. I have a new question. I have queried what bands can be selected. Does anyone know which one would be for LTE Band 17? What is "41.WLAN_US_5000"...
at$QCbandpref?
$QCBANDPREF:
"1.BC0_A"
"2.BC0_B"
"3.BC0"
"4.BC1"
"5.BC3"
"6.BC4"
"7.BC5"
"8.GSM_DCS_1800"
"9.GSM_EGSM_900"
"10.GSM_PGSM_900"
"11.BC6"
"12.BC7"
"13.BC8"
"14.BC9"
"15.BC10"
"16.BC11"
"17.BC12"
"18.BC14"
"19.BC15"
"20.BC16
"21.GSM_450"
"22.GSM_480"
"23.GSM_750"
"24.GSM_850"
"25.GSM_RGSM_900"
"26.GSM_PCS_1900"
"27.WCDMA_I_IMT_2000"
"28.WCDMA_II_PCS_1900"
"29.WCDMA_III_1700 "
"30.WCDMA_IV_1700"
"31.WCDMA_V_850"
"32.WCDMA_VI_800 "
"33.WCDMA_VII_2600"
"34.WCDMA_VIII_900"
"35.WCDMA_IX_1700"
"36.WLAN_US_2400 "
"37.WLAN_JAPAN_2400"
"38.WLAN_EUROPE_2400"
"39.WLAN_SPAIN_2400"
"40.WLAN_FRANCE_2400 "
"41.WLAN_US_5000"
"42.WLAN_JAPAN_5000"
"43.WLAN_EUROPE_5000"
"44.WLAN_SPAIN_5000"
"45.WLAN_FRANCE_5000 "
"46.Any"
OK
Click to expand...
Click to collapse
Related
So, I went into the Sprint store and I sweet talked the girl at the store to give me my MSL for my phone.. is there a way i can change my antenna PRL like you use to on the HTC EVO and similar phones to get the 3G hack?
What are you talking about "3G hack"?
I imagine we'll be able to eventually...I guess you could try flashing PRL if you are rooted and have the CWM Recovery flashed. Not sure if possible while bootloader is locked still.
Do you mean the data hack to bypass the proxy server?
If that's what you are wanting to do go to the dialer and type ##3282# and click multimedia and then click menu and edit change both IP's to 0.0.0.0 and both ports to 0.
acoleman1981 said:
Do you mean the data hack to bypass the proxy server?
Click to expand...
Click to collapse
For anyone else wondering what this is for, Sprint downsamples and caches images going to/from phones, and this disables that.
acoleman1981 said:
If that's what you are wanting to do go to the dialer and type ##3282# and click multimedia and then click menu and edit change both IP's to 0.0.0.0 and both ports to 0.
Click to expand...
Click to collapse
what's the passcode it asks for?
brianez21 said:
what's the passcode it asks for?
Click to expand...
Click to collapse
Your MSL number.
Sorry didn't see your question till now.
This is what im Referring to.
brianez21 said:
What are you talking about "3G hack"?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=696073
Is there a way to do this Hack with the Photon if I have the MSL of my Phone?
Also is the EPST capable of doing it, or do I need to downgrade my EPST to 2.1?
manekineko said:
For anyone else wondering what this is for, Sprint downsamples and caches images going to/from phones, and this disables that.
Click to expand...
Click to collapse
Not doubting since doing that increased my speeds, but where did you get this information?
Just curious where you read that.
MultiDev said:
Not doubting since doing that increased my speeds, but where did you get this information?
Just curious where you read that.
Click to expand...
Click to collapse
Do an XDA search on "sprint http proxy." This has been well-documented and discussed countless times with numerous other Sprint phones.
Beknatok said:
Your MSL number.
Click to expand...
Click to collapse
How do I get my MSL number on Android? I tried using "getprop ril.MSL" but that doesn't return anything. Thanks in advance.
I just traded my EVO 4G for a new Photon.
Would my MSL be the same, or does a new phone mean a different MSL?
brianez21 said:
How do I get my MSL number on Android? I tried using "getprop ril.MSL" but that doesn't return anything. Thanks in advance.
Click to expand...
Click to collapse
There's a MSL reader on the market that requires root or you can call Sprint CS.
Jeffrey_L said:
I just traded my EVO 4G for a new Photon.
Would my MSL be the same, or does a new phone mean a different MSL?
Click to expand...
Click to collapse
New MSL. Root and get it with the market app.
Even though I'm rooted, the new MSL reader still doesn't work since it says that the /dev/smd0 folder is missing.
TS
twospirits said:
Even though I'm rooted, the new MSL reader still doesn't work since it says that the /dev/smd0 folder is missing.
TS
Click to expand...
Click to collapse
Call CS and ask them if they can please give you your MSL Code, If they try to say they cannot give it to you, tell them that your not getting service and you need to restart your antenna keys. Works 9/10 time if not just hang up and call again.
I think the op is asking if its possible to get in to diag mode and use qpst to write a new prl such as the 000001 prl that makes the phone run off Verizon towers. The proxy hack works sometimes but it doesn't really help if you have ****ty coverage like I do. Also it disables Sprint TV. So if anybody knows the code for diag mode that would be great.
Sent from my PG86100 using Tapatalk
for someone who has a photon!
can you dial ##775# and let me know what happens?
im looking into getting this phone just have a few simple things im looking for first.
thanks.
hey all,
looking at getting this phone this weekend, but curious about the LTE.. I live in a rural area that doesnt have LTE, we will be on HSPA+ for a while yet. Carrier is Telus in Nova Scotia.
I have read that LTE is a bit of a battery hog, if there is no LTE in my area will the phone keep hunting for LTE?
Can i "disable" LTE and have it default to HSPA+?(primarily for battery consumption)
Thanks
EDIT: sorry i just notice the post about questions going in the Q&A, sorry, if a mod could move it, that would be great
Yes you can disable it. which carrier are you with?
Hi, I have the AT&T S3 and I've used the code *#2263# and selected WCDMA and the frequency, and now it stays on HSPA
I hope it helps!
Thanks thats what I was getting at (wasn't sure if you guys had that option or not) OP there is your method.
You can also get the app Phone Info to change your settings
Excellent Info! Thanks
Do you think the battery life will be better ?
zuachs said:
Hi, I have the AT&T S3 and I've used the code *#2263# and selected WCDMA and the frequency, and now it stays on HSPA
I hope it helps!
Click to expand...
Click to collapse
hrmm...when I do that on my ATT S3 it just takes me to a screen that says RAT selection option is restricted.
I don't see any other options.
zuachs said:
Hi, I have the AT&T S3 and I've used the code *#2263# and selected WCDMA and the frequency, and now it stays on HSPA
I hope it helps!
Click to expand...
Click to collapse
Can you do this on other carriers?
BonesHopkins said:
hrmm...when I do that on my ATT S3 it just takes me to a screen that says RAT selection option is restricted.
I don't see any other options.
Click to expand...
Click to collapse
Same here.
Sent from my SAMSUNG-SGH-I747 using xda premium
There was a way to get out of this before, I think it involves you taking out your sim card.
Ah, here it is. Try this!
http://forum.xda-developers.com/showthread.php?t=1189241
y2whisper said:
There was a way to get out of this before, I think it involves you taking out your sim card.
Ah, here it is. Try this!
http://forum.xda-developers.com/showthread.php?t=1189241
Click to expand...
Click to collapse
Does this mean that some ATT phones have a different modem than other supposedly identical ATT phones??
i found there is no need to use codes, etc
Settings > More Settings > Mobile Networks > Network mode
Gives you 4 options
GSM/HSPA/LTE (Auto Mode)
GSM/HSPA (Auto Mode)
GSM Only
HSPA Only
Blaisun said:
i found there is no need to use codes, etc
Settings > More Settings > Mobile Networks > Network mode
Gives you 4 options
GSM/HSPA/LTE (Auto Mode)
GSM/HSPA (Auto Mode)
GSM Only
HSPA Only
Click to expand...
Click to collapse
For ATT phones this option is locked out. FYI. Tmo, Sprint and Verizon it's prolly not. Only annoying thing about ATT's version so far. My HOX is the same way.
Root and you can access it I think.
1SiK1500 said:
Can you do this on other carriers?
Click to expand...
Click to collapse
Hi, I'm using the At&t version of the S3 on another network (Claro) and the code works. Maybe something is different because of that?
Are you guys using this like I said earlier?
https://play.google.com/store/apps/...neInfo&feature=nav_result#?t=W251bGwsMSwyLDNd
stevessvt said:
Are you guys using this like I said earlier?
https://play.google.com/store/apps/...neInfo&feature=nav_result#?t=W251bGwsMSwyLDNd
Click to expand...
Click to collapse
I tried this one but it doesn't work for me. I see the information and can run ping test but if I try to make a band change the new selection is not applied.
I'm only able to change it using *#2263# :/
Ohhhhhhh....OK.
idk *#2263# isnt working at all on my att phone.
ficesnh 1816
Blaisun said:
i found there is no need to use codes, etc
Settings > More Settings > Mobile Networks > Network mode
Gives you 4 options
GSM/HSPA/LTE (Auto Mode)
GSM/HSPA (Auto Mode)
GSM Only
HSPA Only
Click to expand...
Click to collapse
my rooted TMobile SGS3 doesn't even have this option... no Network mode!!
ATT Galaxy S3. *#2263# is not working. Any other options to turn off radio for LTE?
zuachs said:
I'm only able to change it using *#2263# :/
Click to expand...
Click to collapse
Apparently it is now possible to unlock the sim for our phones, I got in touch with the user, send any update.
http://clubgsm.vn/showthread.php?30624-LG-G3-LS990-Sprint-Unlock-Ok
by the way with the trick of build.prop it´s possible to unlock???
Waiting to hear
gelt_0 said:
Apparently it is now possible to unlock the sim for our phones, I got in touch with the user, send any update.
http://clubgsm.vn/showthread.php?30624-LG-G3-LS990-Sprint-Unlock-Ok
by the way with the trick of build.prop it´s possible to unlock???
Click to expand...
Click to collapse
That link shows an LS990 ZV4 unlocked on an international carrier. Sprint has always been willing to unlock the SIM for use with an international carrier. Even with Google Translate, none of the posts on that site make any sense. Were you saying this somehow meant domestic GSM unlocking was now possible?
GSM for LS990
I did not find the answer there.
I know him in this vietnamese site's
csansom said:
That link shows an LS990 ZV4 unlocked on an international carrier. Sprint has always been willing to unlock the SIM for use with an international carrier. Even with Google Translate, none of the posts on that site make any sense. Were you saying this somehow meant domestic GSM unlocking was now possible?
Click to expand...
Click to collapse
because the user indicates that they are cell phones with bad ESN.
this will unlock for domestic use? I have internationally unlocked, but would love to unlock domestic
Someone said change SPR to OPEN setup SIM and APN then change OPEN to spr reboot recovery wipe cache and this will make good for Domestic APN..I will try later on today and report back
Yeah it works...4G US GSM carriers
Im stoked to hear it works. 4g and spark hardly exists here. Can you report which carriers you connected to successfully with 4g? I heard only 3g was possible on tmobile (which has my interest for sim)
HSPA with T-Mobile and HSPA+ with AT&T
12manytimes said:
HSPA with T-Mobile and HSPA+ with AT&T
Click to expand...
Click to collapse
So what sim unlock method did you use? You are the first to claim your Sprint LG G3 is working with tmo and att. BTW, can you post some screens?
Customer already had the phone back..just root pull off build.prop change SPR to OPEN but back in phone make sure u check permissions..place SIM in phone use APN manager to add APN and then u can post screen shots [emoji2]
12manytimes said:
HSPA with T-Mobile and HSPA+ with AT&T
Click to expand...
Click to collapse
How did you do this? I do not understand the site or anything, and would love to get my phone working on AT&T
12manytimes said:
Yeah it works...4G US GSM carriers
Click to expand...
Click to collapse
which parameter did u change in build.pro,I change the ro.build.target_operato and ro.carrier to open,the signal will show in satart quickly then instead of com.andorid.phone wrong all system ui wrong,u should toggle airplane mode then no wrong info. so I wander what u done could make it work fine with no wrong message? I need to wipe? or other operate?thx:laugh:
change ro.build.target_operator to spr instead of SPR.
changing it to OPEN will make the g3 crash over and over.
weijoin said:
which parameter did u change in build.pro,I change the ro.build.target_operato and ro.carrier to open,the signal will show in satart quickly then instead of com.andorid.phone wrong all system ui wrong,u should toggle airplane mode then no wrong info. so I wander what u done could make it work fine with no wrong message? I need to wipe? or other operate?thx:laugh:
Click to expand...
Click to collapse
weijoin said:
which parameter did u change in build.pro,I change the ro.build.target_operato and ro.carrier to open,the signal will show in satart quickly then instead of com.andorid.phone wrong all system ui wrong,u should toggle airplane mode then no wrong info. so I wander what u done could make it work fine with no wrong message? I need to wipe? or other operate?thx:laugh:
Click to expand...
Click to collapse
You need to fix the permissions to the build.prop to stop fc errors after editing the build.prop on the G3.
Everytime you edit the build.prop you need to fix its permissions before restarting your phone.
anyone know about setting wifi calling after this?
I unlocked my LG G3.. am using T-mobile now.. but i have no reception in my building (work) but i have wifi. anyone know of a fix? thanks
mistaanime said:
anyone know about setting wifi calling after this?
I unlocked my LG G3.. am using T-mobile now.. but i have no reception in my building (work) but i have wifi. anyone know of a fix? thanks
Click to expand...
Click to collapse
Dissable the LTE radio and only select HSPA+
gelt_0 said:
Dissable the LTE radio and only select HSPA+
Click to expand...
Click to collapse
Thanks for the reply. How do it do that? I only changed the "spr" and changed the APN on the LTE and the MMS.
How to Flash U Firmware On AT&T and Keep Volte & video calling and get lte band 17
So after Doing some looking around i found out how to get volte and video calling working,and enable band 17 on G930U. I dont take credit for this. i seen it on a different forum and just wanna make sure people know how to fix it.
For starters if you dont have g930u or dont know what it is. heres a great thread about it with easy to follow instructions http://forum.xda-developers.com/att-galaxy-s7/how-to/xda-community-love-g930u-t3415875
Okay so after you flash the U Firmware.
edit the others.xml in System/csc. Scroll to the bottom of the xml and change volte and video calling to TRUE. Save and then reboot. The options will be in settings and the video calling icon will be in the dialer.
and to re-enable band I7 Open the dial pad
Type: *#0011# to enter Service Mode (Be very careful with what you do here)
Note: You need to be rooted for this to work
Once in Service Mode, do the following:
Tap the menu button and tap Back
Tap the menu button again and select "Key Input" and enter an upper case Q and press OK
Tap the menu button again and select "Key Input" and enter 4 zeroes (0000) and press OK
Wait 5 - 15 seconds. You'll see the Main Menu
Choose option [2]: UE SETTING & INFO
Choose option [1]: SETTING
Choose option [1]: PROTOCOL
Choose option [2]: NAS
Choose option [1]: NETWORK CONTROL
Choose option [4]: BAND SELECTION
Choose option [4]: LTE Band Preference
Choose option [7]: LTE ALL (Or you can choose any band instead)
If you want to go back then tap the menu button and choose Back (Don't press the back key)
Once again guys i take no credit for any of this. ive just seen people looking for the information and decided to put it all together for you
I am just curious, what's the benefit of enabling B17 on the device given that AT&T has B12 MFBI enabled throughout its network?
Does this enable the enhanced LTE voice? When you go to About Device > Status does it show IMS registration status as "Registered"? None of the carrier specific features will work unless the IMS is registered on the AT&T network.
Tikerz said:
Does this enable the enhanced LTE voice? When you go to About Device > Status does it show IMS registration status as "Registered"? None of the carrier specific features will work unless the IMS is registered on the AT&T network.
Click to expand...
Click to collapse
Mine is not registered. I've been trying to figure out how to register it. Do you know how to rotisserie it?
dirtydodge said:
Mine is not registered. I've been trying to figure out how to register it. Do you know how to rotisserie it?
Click to expand...
Click to collapse
I know how to rotisserie a chicken, but I have not tried to rotisserie my phone.
Tikerz said:
I know how to rotisserie a chicken, but I have not tried to rotisserie my phone.
Click to expand...
Click to collapse
Lol. Damn auto correct. "Register"
dirtydodge said:
Lol. Damn auto correct. "Register"
Click to expand...
Click to collapse
LOL, I know.
What I understand is that none of the carrier specific features will work unless the AT&T network registers your phone. They have certain models they will recognize on their network for those features. 930U is not one of those models.
Tikerz said:
LOL, I know.
What I understand is that none of the carrier specific features will work unless the AT&T network registers your phone. They have certain models they will recognize on their network for those features. 930U is not one of those models.
Click to expand...
Click to collapse
Thanks. I'm not even sure what IMS is but i have noticed before that it isn't registered.
15jpenni said:
So after Doing some looking around i found out how to get volte and video calling working,and enable band 17 on G930U. I dont take credit for this. i seen it on a different forum and just wanna make sure people know how to fix it.
For starters if you dont have g930u or dont know what it is. heres a great thread about it with easy to follow instructions http://forum.xda-developers.com/att-galaxy-s7/how-to/xda-community-love-g930u-t3415875
Okay so after you flash the U Firmware.
edit the others.xml in System/csc. Scroll to the bottom of the xml and change volte and video calling to TRUE. Save and then reboot. The options will be in settings and the video calling icon will be in the dialer.
and to re-enable band I7 Open the dial pad
Type: *#0011# to enter Service Mode (Be very careful with what you do here)
Note: You need to be rooted for this to work
Once in Service Mode, do the following:
Tap the menu button and tap Back
Tap the menu button again and select "Key Input" and enter an upper case Q and press OK
Tap the menu button again and select "Key Input" and enter 4 zeroes (0000) and press OK
Wait 5 - 15 seconds. You'll see the Main Menu
Choose option [2]: UE SETTING & INFO
Choose option [1]: SETTING
Choose option [1]: PROTOCOL
Choose option [2]: NAS
Choose option [1]: NETWORK CONTROL
Choose option [4]: BAND SELECTION
Choose option [4]: LTE Band Preference
Choose option [7]: LTE ALL (Or you can choose any band instead)
If you want to go back then tap the menu button and choose Back (Don't press the back key)
Once again guys i take no credit for any of this. ive just seen people looking for the information and decided to put it all together for you
Click to expand...
Click to collapse
You left out the part where root is required to modify a CSC in the system partition.
Sent from my SAMSUNG-SM-G935A using Tapatalk
not where to be found those csc settings on a 930a with the latest pg9 Ota firmware
I am on the 930U firmware on my ATT&T S7. I can get to service mode, I am rooted, but can not get to the Main Menu. I have tried several times and it does not get past the opening page. Any suggestions?
I don't understand. Isn't G930U supposed to be used in US? If a band is used by a US carrier and supported by phone hardware, why firmware disable it?
hugeadrian said:
I don't understand. Isn't G930U supposed to be used in US? If a band is used by a US carrier and supported by phone hardware, why firmware disable it?
Click to expand...
Click to collapse
Well, why does TMobile wifi calling work straight out of the box on the U firmware while AT&T's doesnt?
joe3681 said:
Well, why does TMobile wifi calling work straight out of the box on the U firmware while AT&T's doesnt?
Click to expand...
Click to collapse
IMO this is because of the stupid AT&T policy, not because the phone does not support it.
AFAIK not being able to use band 17 is Samsung's problem right?
hugeadrian said:
IMO this is because of the stupid AT&T policy, not because the phone does not support it.
AFAIK not being able to use band 17 is Samsung's problem right?
Click to expand...
Click to collapse
The S7 has wifi calling on the ATT branded rom. It's the stupid (or smart in a business sense) way they change things to their own proprietary format. If you want wifi calling then you have to buy their phone, not the U version.
crackinx said:
The S7 has wifi calling on the ATT branded rom. It's the stupid (or smart in a business sense) way they change things to their own proprietary format. If you want wifi calling then you have to buy their phone, not the U version.
Click to expand...
Click to collapse
Really? If G930U doesn't have wifi calling, why can T-Mobile users use wifi calling on G930U firmware?
hugeadrian said:
Really? If G930U doesn't have wifi calling, why can T-Mobile users use wifi calling on G930U firmware?
Click to expand...
Click to collapse
That's what I'm saying it has wifi calling, but it does not work on the ATT network because they changed their rom for their wifi calling, the built in Wifi calling in the U rom does not work with ATT.
I come across trying to fix my lte by selecting other bands by using the sammy service mode app to access settinga to change the lte bands but it says it's blocked by the system. So does anyone know how to get it to work correctly? Know what is blocking me from accessing the bands? I know*#27663368378# takes me to the main service menu but no bands under CDMA to choose. Then the *#0011# brings up a no service imei certi : na. So that way seems blocked to. So any help? ?
Any help???
bjf189 said:
I come across trying to fix my lte by selecting other bands by using the sammy service mode app to access settinga to change the lte bands but it says it's blocked by the system. So does anyone know how to get it to work correctly? Know what is blocking me from accessing the bands? I know*#27663368378# takes me to the main service menu but no bands under CDMA to choose. Then the *#0011# brings up a no service imei certi : na. So that way seems blocked to. So any help? ?
Click to expand...
Click to collapse
Try using shortcut master lite, the find the service mode manually, that's what worked for me
Killa8 said:
Try using shortcut master lite, the find the service mode manually, that's what worked for me
Click to expand...
Click to collapse
i only got a list of codes that mostly didnt even work. i use phone info to bring up codes but its nothing to open up what im wantin