[Q] Sprint Mega stuck on SAMSUNG logo - Samsung Galaxy Mega

Please help!! I'm in desperate need of help. I must have followed the wrong instructions to root my Sprint Mega and now I'm stuck on the SAMSUNG screen. I don't know what to do and need my phone. What do I need to do?

ladi_ntyce said:
Please help!! I'm in desperate need of help. I must have followed the wrong instructions to root my Sprint Mega and now I'm stuck on the SAMSUNG screen. I don't know what to do and need my phone. What do I need to do?
Click to expand...
Click to collapse
You need to download the stock firmware use odin to flash it back you soft bricked it did you ever make a nandroid backup? looks like you deleted the stock image

anaiistruth said:
You need to download the stock firmware use odin to flash it back you soft bricked it did you ever make a nandroid backup? looks like you deleted the stock image
Click to expand...
Click to collapse
FINALLY! I was able to fix it by flashing a rom, but now I don't have mobile network or data service?

ladi_ntyce said:
FINALLY! I was able to fix it by flashing a rom, but now I don't have mobile network or data service?
Click to expand...
Click to collapse
was the rom built for the sprint variant? or did you flash the international variant? i HIGHLY recommend you go completely back to stock

ladi_ntyce said:
FINALLY! I was able to fix it by flashing a rom, but now I don't have mobile network or data service?
Click to expand...
Click to collapse
@ladi_ntyce
It sounds like you would need to flash the modem linked on silesh's thread, then do the dialer code to reset your connectivity. It's like ##72786# or something like that. Good luck, it's day one for me with this huge thing.
Sent from Uranus, the only planet with a ring on the inside.

Related

[Q] p7500ruxkh4 Rooting and more

Ok here it is,
Im reading and reading about the rooting.
I tryed to synch my tab with kies to root my tab following this THREAD but it doesnt work
So I posted about it and someone suggested me to check the LOOK HERE THREAD instead
I have a p7500 16gb 4G(well in fact 3G++) and wi-fi (p7500ruxkh4)
Im in canada (quebec province) and am with rogers
data plan, locked sim
honeycomb 3.1
kernel is 2.6.36.3
Now i want to use some apps like titanium backup and some others that need a rooted tab and thats it. I dont want to change kernel or rom or whatever else.
In the LOOK HERE THREAD, there is 2 different P7500 rooting method, one for the 3G and one for the 4G.
On my box and in my "task bar" its says 4G but for what i know, its more 3G++ than real 4G, So WICH one of the tuto do i follow ?
Also, at http://www.samfirmware.com/ i cant find the stock firmware for my p7500ruxkh4
That mean that if i do wrong, i wont be able to recover as brand new. Any clues of where to find it ?
Now about CMW and Odin, since i just want to root, do i have to dl thoses programs ?
Also in the UNROOT tutorial, you guys talk about the filesfordummies, but for what i read, this file is for the p7510 and not for my p7500 right?
So if i want to UNROOT my P7500, what are the proper steps to follow ?
I know, theses are probably noob questions but after searching on the net and this forum, I couldnt find any clear anwsers so i think i should ask you guys first instead of trying and brick my tab.
There is 5 bold/underline questions. I hope some of you have all the anwsers.
Thanks in advance for your help
1. IMPORTANT: in the look here thread use the root package for the 3G model
the 4G/LTE version will cause your system to bootloop
2. DO A NANDROID backup of your stock install -- then you have that to go back to.
3. Team Overcome have a great guide and package: stock for restore and clean purposes, CWM for root usage and a very nice custom rom: see here
4. if you want a custom kernel, there is one by Pershoot and the modification by rego here which plays nice with Overcome and matches your 7500 very well.
lgsshedden said:
1. IMPORTANT: in the look here thread use the root package for the 3G model
the 4G/LTE version will cause your system to bootloop
Click to expand...
Click to collapse
Thank you
lgsshedden said:
2. DO A NANDROID backup of your stock install -- then you have that to go back to.
Click to expand...
Click to collapse
got version 2.0 from a quick search on xda forum thanks, ill check it out to sse how it work
lgsshedden said:
3. Team Overcome have a great guide and package: stock for restore and clean purposes, CWM for root usage and a very nice custom rom: see here
Click to expand...
Click to collapse
That is not really clear for me, all i want is to ROOT so i can use apps like titanium backup, and i also want to know the right steps if i need to UNROOT
lgsshedden said:
4. if you want a custom kernel, there is one by Pershoot and the modification by rego here which plays nice with Overcome and matches your 7500 very well.
Click to expand...
Click to collapse
thanks but just like i stated before, all i want is to ROOT the tab.
I was wondering if you backed up your Stock Firmware? I am using some Europe firmware as of now because I was one of the unlucky who used the 4G unlock.
crecsky said:
I was wondering if you backed up your Stock Firmware? I am using some Europe firmware as of now because I was one of the unlucky who used the 4G unlock.
Click to expand...
Click to collapse
well, i rooted my tab and used rom manager to backup my actual rom. i dont know if it can help u.
another thing, i changed the hosts file in /system/etc/hosts to avoid ads in games or app.
since im not rally used to all this stuff, tell me if there is something i can do for you, and if so, ill help with pleasure
If you backed it up just after you rooted it should be okay, I should be able to load your Backup to get my rom back to normal and then Factory Reset to get it all cleaned off. Let me know if there is a way you can email or dropbox it to me in a pm.
It would be awesome!
check ur pm, if it work, just click thanks
Thanks alot. I'll click thanks and personally write a thank you note.
Just so you know you're likely to be asked to help other Canadians as well. As the firmware is apparently hard to come buy.
crecsky said:
Thanks alot. I'll click thanks and personally write a thank you note.
Just so you know you're likely to be asked to help other Canadians as well. As the firmware is apparently hard to come buy.
Click to expand...
Click to collapse
perhaps upload the base firmware in the version you have from your nandroid backup to multiupload or mediafire and then just post the link??
lgsshedden said:
perhaps upload the base firmware in the version you have from your nandroid backup to multiupload or mediafire and then just post the link??
Click to expand...
Click to collapse
yeah i could do that, its a 1gb file (once .rar)
ill check what i can do and ill start a new subject,
@crecsky :
please confirm to me that the file was working for you before i post it at large
http://forum.xda-developers.com/showthread.php?t=1171089
im about to get a Rogers 4G (3G+ w/e u wanna call it) GT 10.1 and have been reading a lot about how to root and get everything backed up, was just wondering if you guys could clear something up for me about the "UNROOTING & RESTORING STOCK RECOVERY" steps...
step 2..."2. Use Odin to flash the stock recovery from the filesfordummies.zip."
where can i get the stock recovery for the rogers version? or how can i extract and save the stock recovery from the tablet when i get it?
Nainconpetant said:
yeah i could do that, its a 1gb file (once .rar)
ill check what i can do and ill start a new subject,
@crecsky :
please confirm to me that the file was working for you before i post it at large
Click to expand...
Click to collapse
Sorry it took so long for me to reply. Yes the file worked. Although your stuff was backed up on it as well. I just wiped after the first startup.
crecsky said:
Sorry it took so long for me to reply. Yes the file worked. Although your stuff was backed up on it as well. I just wiped after the first startup.
Click to expand...
Click to collapse
at least there was nothing that you shouldnt see
Babukb2 said:
http://forum.xda-developers.com/showthread.php?t=1171089
im about to get a Rogers 4G (3G+ w/e u wanna call it) GT 10.1 and have been reading a lot about how to root and get everything backed up, was just wondering if you guys could clear something up for me about the "UNROOTING & RESTORING STOCK RECOVERY" steps...
step 2..."2. Use Odin to flash the stock recovery from the filesfordummies.zip."
where can i get the stock recovery for the rogers version? or how can i extract and save the stock recovery from the tablet when i get it?
Click to expand...
Click to collapse
check this post http://forum.xda-developers.com/showpost.php?p=19526549&postcount=321
you have to register to dl the p7500 firmware
dunno if its the one for canada, but you can send an email to the address refered in the post i gave you to ask the admin if he knows where to get it, and then, i guess you can tell us if you found it and where.

Galaxy s2 Bell Update?

Hey guys I asked Bell Mobility about an official upgrade for the Galaxy s2. But, I got nothing from them. They just told me to either contact Samsung or to contact a phone number they gave me. But I'm almost positive everyone else I call will give me similar replys. So if you guys know anything please post!!
I wouldn't bother waiting for Bell to push an update.
Sent from my GT-I9100 using XDA App
SaneinOne said:
I wouldn't bother waiting for Bell to push an update.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Darn... well I tried to flash my s2 but problems occured (such as application error forcing me to leave the application and a pop-up would show, or random shut downs). This made me to flash back to the stock Bell firmware, but even after that there seems to be some problems and also the bootloader logo is now changed to a i-9100 logo instead of a i9100m logo. Please help. I did follow all the instructions that were given in the threads to flash but I guess I messed something up.... Any ideas?
what firmware do you have? ugkg2?
skiflyer said:
what firmware do you have? ugkg2?
Click to expand...
Click to collapse
Yes thats the current firmware I have but I would like to change it to a 2.3.5 since theres the battery problem. But what I dont understand is why am I having new problems everytime I flash?
Hey guys do you have any suggestions????
Try CheckROM v4 and the SpeedMOD kernel. Seems to work great with my Bell sgs2.
Sent from my GT-I9100M using XDA App
cholywell said:
Try CheckROM v4 and the SpeedMOD kernel. Seems to work great with my Bell sgs2.
Sent from my GT-I9100M using XDA App
Click to expand...
Click to collapse
I'm not sure.. I might want to send the phone in for repair. There seems to couple of problems that reappears even after reinstalling firmware.. so... I'm not sure. I just want to know how to install a firmware that would make everything work correctly on my galaxy; within the warrenty limits.
Check here for a thread along the name of "how to update bell galaxy s2 to 2.3.5" it explains everything.
Sent from my GT-I9100 using XDA App
Aincalandorn said:
Check here for a thread along the name of "how to update bell galaxy s2 to 2.3.5" it explains everything.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I already did that but my galaxy is messed up even more.
InStake said:
Darn... well I tried to flash my s2 but problems occured (such as application error forcing me to leave the application and a pop-up would show, or random shut downs). This made me to flash back to the stock Bell firmware, but even after that there seems to be some problems and also the bootloader logo is now changed to a i-9100 logo instead of a i9100m logo. Please help. I did follow all the instructions that were given in the threads to flash but I guess I messed something up.... Any ideas?
Click to expand...
Click to collapse
If you want logo back then flash bell kernel and I do a full wipe. Your i9000m will be back. Actually if you had followed flashing instructions properly you would not have problems with 2.3.5 or 2.3.6 either.
You obviously need to learn more but here is a free tip. Don't even dream sending it for service to bell with i9000 logo! Or any traces of flashing. You would be better of if it was dead. That is unless you like to pay for out of warranty repairs.
Sent from my GT-I9100
Idan73 said:
If you want logo back then flash bell kernel and I do a full wipe. Your i9000m will be back. Actually if you had followed flashing instructions properly you would not have problems with 2.3.5 or 2.3.6 either.
You obviously need to learn more but here is a free tip. Don't even dream sending it for service to bell with i9000 logo! Or any traces of flashing. You would be better of if it was dead. That is unless you like to pay for out of warranty repairs.
Sent from my GT-I9100
Click to expand...
Click to collapse
Yep I tried everything.
1) download the firmware I want to use.
2) check kies and all of its applications are closed
3) turn phone off
4) take sim and memory card out
5) get it to download mode and insert usb
6) turn on odin and input all the downloaded files
7) start the odin program
8) once everything is downloaded and loading is complete on the sgs2 take the usb port out
9) finished!
These are the procedures I take.
Anything missing or should I correct?
And also, how do you change the bootloader?
PLEASE HELP.
And what other ways can Samsung detect that I flashed???
InStake said:
Hey guys I asked Bell Mobility about an official upgrade for the Galaxy s2. But, I got nothing from them. They just told me to either contact Samsung or to contact a phone number they gave me. But I'm almost positive everyone else I call will give me similar replys. So if you guys know anything please post!!
Click to expand...
Click to collapse
Dont waste your breath with them, Bell have the Worst customer service of all the carriers
Just update with guide in XDA here
DrewVL said:
Dont waste your breath with them, Bell have the Worst customer service of all the carriers
Just update with guide in XDA here
Click to expand...
Click to collapse
That sucks............ why Bell.. why..
Is there a way to put the phone to the way it was when it came out of the box. ie: have the normal bootloader and firmware?
Idan73 said:
If you want logo back then flash bell kernel and I do a full wipe. Your i9000m will be back. Actually if you had followed flashing instructions properly you would not have problems with 2.3.5 or 2.3.6 either.
You obviously need to learn more but here is a free tip. Don't even dream sending it for service to bell with i9000 logo! Or any traces of flashing. You would be better of if it was dead. That is unless you like to pay for out of warranty repairs.
Sent from my GT-I9100
Click to expand...
Click to collapse
Also, do you use the Frankenstein version or the normal version?
InStake said:
Is there a way to put the phone to the way it was when it came out of the box. ie: have the normal bootloader and firmware?
Click to expand...
Click to collapse
Do a factory reset. Then flash the orignal Bell firmware, kernel, modem and CSC. Downloads are listed in this thread. If you want to send it in for repair then you will then need to buy a $5 USB jig off ebay to reset the custom ROM counter before sending in for repair.
cholywell said:
Do a factory reset. Then flash the orignal Bell firmware, kernel, modem and CSC. Downloads are listed in this thread. If you want to send it in for repair then you will then need to buy a $5 USB jig off ebay to reset the custom ROM counter before sending in for repair.
Click to expand...
Click to collapse
So there is no other way to reset the counter right? And could you give me alink of a trustable one?

[Q] Serious Radio/Signal issues

Hey guys Long time creeper first time poster.
Anyways i picked up a galaxy note yesterday that was bricked for about $175. The guy had soft bricked it recovery and download were still accessible so i simply used odin to reinstall stock rogers from Da_G's thread. The guy said he bricked it because he had a JB rom on there and wanted to go back to stock but odin froze and thats how the system bricked.
Anyways right now i have the system working and running Stock ICS from Rogers. The current issue i am facing is that there is some sort of issue with the signal. The device jumps between Virgin mobile(my provide) and emergency only. Constantly i cannot get a reliable signal on the phone. Calls constantly fail and messages rarely send.
I have tried flashing the stock radio for rogers from Da_G's thread as well but no luck. The apn is correct and ive tried turning LTE off, no success at all. Does anyone in the community have any suggestions this is a really frustrating problem!
Thanks
Joe-Pk said:
Hey guys Long time creeper first time poster.
Anyways i picked up a galaxy note yesterday that was bricked for about $175. The guy had soft bricked it recovery and download were still accessible so i simply used odin to reinstall stock rogers from Da_G's thread. The guy said he bricked it because he had a JB rom on there and wanted to go back to stock but odin froze and thats how the system bricked.
Anyways right now i have the system working and running Stock ICS from Rogers. The current issue i am facing is that there is some sort of issue with the signal. The device jumps between Virgin mobile(my provide) and emergency only. Constantly i cannot get a reliable signal on the phone. Calls constantly fail and messages rarely send.
I have tried flashing the stock radio for rogers from Da_G's thread as well but no luck. The apn is correct and ive tried turning LTE off, no success at all. Does anyone in the community have any suggestions this is a really frustrating problem!
Thanks
Click to expand...
Click to collapse
Flash another ROM on it. And keep in mind, it was sold to you as a brick. Maybe it also had the radio issue before you got it.
You did the ICS update via OTA?
Im downloading this rom now "UCLF6 Base Rom Featuring
The Unofficial FJ-Mod Build #11
"RISE UP!""
Will try it and see if it makes any difference.
Agoattamer said:
You did the ICS update via OTA?
Click to expand...
Click to collapse
I installed the stock ics through odin i never did any OTA's it says there are none available.
So i flashed a new rom and i still cannot complete calls or send text messages...sometimes it works and sometimes it, majority of the time it is not working...any other suggestions?
What model is it? That info is under the battery.
rangercaptain said:
What model is it? That info is under the battery.
Click to expand...
Click to collapse
SGH-I717R
Have you tried a different modern yet?
Sent from my SAMSUNG-SGH-I717 using xda premium
rquiett said:
Have you tried a different modern yet?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
I have tired UCLF6 Modem and the AT&T Modem.
Joe-Pk said:
I have tired UCLF6 Modem and the AT&T Modem.
Click to expand...
Click to collapse
From what I see it looks like they use the T-mobile frequencies but I could be wrong. You may need to give a t-mobile modem a try
rquiett said:
From what I see it looks like they use the T-mobile frequencies but I could be wrong. You may need to give a t-mobile modem a try
Click to expand...
Click to collapse
I know that virgin uses HSPA+ frequencies but im willing to try anything can you send me a link to the T-mobile modem? And its safe to flash correct, shouldnt cause a hard brick?
Joe-Pk said:
I know that virgin uses HSPA+ frequencies but im willing to try anything can you send me a link to the T-mobile modem? And its safe to flash correct, shouldnt cause a hard brick?
Click to expand...
Click to collapse
Here is a link to the thread with the T-mobile modems I suggest reading up a bit in there before flashing. And as long as you are following the directions I don't see why it would not be safe to flash
rquiett said:
Here is a link to the thread with the T-mobile modems I suggest reading up a bit in there before flashing. And as long as you are following the directions I don't see why it would not be safe to flash
Click to expand...
Click to collapse
I went ahead and flashed this modem before you posted http://forum.xda-developers.com/showthread.php?t=1679722&highlight=t-mobile+modem
but so far it hasnt made a difference. i will try the one in the thread you posted now.
Tried the stock Tmous modem same issue... any other suggestions. The phone will say its on the network but i just cant send anything. sometimes it will work for 20 mins then it will stop working for a while again.

[Q] [HELP] Phone loops all the time

Hi there guys!
Im having a problem with my samsung galaxy 5 (gt-i5500).Yesterday for some reason my phone just shut down and when i turned it back on, it was looping all the time.I was using MAD ROM 3.0.I can go to recovery menu trough odin, and all sow tried to reinstall it severall times with different roms, no luck, always rebooting.What seems to be the problem?I heard about some fastreboot thing but there is no guide or any other source that could help me.
Best regards
Dikkill
AW: [Q] [HELP] Phone loops all the time
Do you wipe data and system when installing CM versions have you also tried to reflash stockrom?
Sent from my GT-I5500 using xda app-developers app
XdaNoob98 said:
Do you wipe data and system when installing CM versions have you also tried to reflash stockrom?
Sent from my GT-I5500 using xda app-developers app
Click to expand...
Click to collapse
I did wipe data, for the system im not shure.I did not reflash stockrom, how can i do that?
I followed this guide:
http://forum.xda-developers.com/showthread.php?t=1416190
dikkill said:
I did wipe data, for the system im not shure.I did not reflash stockrom, how can i do that?
I followed this guide:
http://forum.xda-developers.com/showthread.php?t=1416190
Click to expand...
Click to collapse
I got it working again! THANKS for the stockrom idea . google it and did it .
AW: [Q] [HELP] Phone loops all the time
Search at google. Search for a guide and Odin 4.23
Sent from my GT-I5500 using xda app-developers app
Try this!
Try to use this rom..it's greate!!!
http://forum.xda-developers.com/showthread.php?t=2087197
Karmaus said:
Try to use this rom..it's greate!!!
http://forum.xda-developers.com/showthread.php?t=2087197
Click to expand...
Click to collapse
I wanted to install it, but in the baseband section my baseband was marked bad.So i didn't install it .Thanks for the help!
Like many others, I've followed the tutorial at http://forum.xda-developers.com/showthread.php?t=1416190 but have ended-up with a loop.
In my case I cannot find the Samsung ROM for the Canadian version ( I5500MUGJJ7 ) as can be seen here http://forum.xda-developers.com/showpost.php?p=13958293&postcount=1 I'm not the only one.
End result is I've bricked my phone I think (but hoping NOT).
I don't think by following that tutorial I made a backup so I don't think I can restore - or CAN I?
Can anyone help me out - THNKS
WapGiovan said:
Like many others, I've followed the tutorial at http://forum.xda-developers.com/showthread.php?t=1416190 but have ended-up with a loop.
In my case I cannot find the Samsung ROM for the Canadian version ( I5500MUGJJ7 ) as can be seen here http://forum.xda-developers.com/showpost.php?p=13958293&postcount=1 I'm not the only one.
End result is I've bricked my phone I think (but hoping NOT).
I don't think by following that tutorial I made a backup so I don't think I can restore - or CAN I?
Can anyone help me out - THNKS
Click to expand...
Click to collapse
You need to install your default original samsung rom that you have the first time you got the phone.Install it and it should work fine.I did that.
dikkill said:
You need to install your default original samsung rom that you have the first time you got the phone.Install it and it should work fine.I did that.
Click to expand...
Click to collapse
Thank you for replying.
That's the point, I don't have the original ROM. I was following the tutorial and had NOT realised I wasn't making a backup and I don't think the original author even realized the it would happen that the Canadian ROM would be one of the very few which couldn't be found if things got screwed-up.
WapGiovan said:
Thank you for replying.
That's the point, I don't have the original ROM. I was following the tutorial and had NOT realised I wasn't making a backup and I don't think the original author even realized the it would happen that the Canadian ROM would be one of the very few which couldn't be found if things got screwed-up.
Click to expand...
Click to collapse
First try to get on the tutorial, from this sequence:
http://forum.xda-developers.com/showthread.php?t=1416190
1.1 We need to install a boot-loader as the Samsung one is very limited and just plain awful! That said, it wasn’t intended to be used for anything other than the Samsung software so it’s not awful from their point of view but it’s pretty unfriendly to us.
To this
2.4 If you are new to use ClockworkMod recovery manager then before doing anything, please have a look at next screen to learn the navigation keys.
If this works, than we will talk what to do next.
Try different official rom, maybe it will work, you don't have anything to lose.
dikkill said:
First try to get on the tutorial, from this sequence:
http://forum.xda-developers.com/showthread.php?t=1416190
1.1 We need to install a boot-loader as the Samsung one is very limited and just plain awful! That said, it wasn’t intended to be used for anything other than the Samsung software so it’s not awful from their point of view but it’s pretty unfriendly to us.
To this
2.4 If you are new to use ClockworkMod recovery manager then before doing anything, please have a look at next screen to learn the navigation keys.
If this works, than we will talk what to do next.
Try different official rom, maybe it will work, you don't have anything to lose.
Click to expand...
Click to collapse
I don't think it's actually the ROM which is the problem but the "baseband". Twice I followed the tutorial and everything worked until it came time to restart the phone. At which time it went into the loop.
I have unlocked G5 and it is not Virgin Mobile - what now!
Thanks
WapGiovan said:
I don't think it's actually the ROM which is the problem but the "baseband". Twice I followed the tutorial and everything worked until it came time to restart the phone. At which time it went into the loop.
I have unlocked G5 and it is not Virgin Mobile - what now!
Thanks
Click to expand...
Click to collapse
Hmm try searching for a "fastboot" method, i really don't know what should be a problem, im not an expert in this :/.Ill try to help you tomorrow again .
Is there such a thing as a fastboot for the Galaxy 5 i5500
I'm getting a little mixed-up and feeling a bit MORE stupid - what's the difference between the ROM and the baseband. Can one copy ROM or baseband from a working phone onto another?
Thanks

[SOLVED]Galaxy Core Prime SM-G360T1(MetroPCS) HELP!

In my attempts to root this device my boot was damaged. I can get into stock recovery and download mod but of course I can not find any roms including the stock for this device. Can someone PLEASE send me there boot.img. If you have the full stock rom for this model SM-G360T1, that would be awesome too. THX!
Boom Shocka Locka
Jedijaded said:
In my attempts to root this device my boot was damaged. I can get into stock recovery and download mod but of course I can not find any roms including the stock for this device. Can someone PLEASE send me there boot.img. If you have the full stock rom for this model SM-G360T1, that would be awesome too. THX!
Click to expand...
Click to collapse
Ok so I should have more faith in myself. So by the end of my nightmare I messed up my boot AND my recovery and could only get into download mode. On a hunch I got ahold of the stock rom for the SM-G360T which is the T-Mobile version of this phone and being as they run on the same network(Same company now) the boot.img and recovery.img WORK ON THIS MODEL. Im back in my phone and everything is running perfect. So for those out there that know WAY more about making roots and roms you might be able to use this stock rom to finally root this monster. Or at least if you soft brick your device you can use these files to get back into your phone until we are able to get the stock rom for this phone. The link to the stock rom for the SM-G360T is below. Hope we get a root for this phone soon. THX!
Im a noob poster on Xda so I cant link it but just go to sammobile.com and search for SM-G360T and make sure you sign up and activate ur account its free you just have to do that or the download link is broke. Have fun.
Did you have to do any unlocking?
im currently downloading the tmobile sm-g360t image( i also have the metro sm-ge360t1) which i had soft bricked by flashing a root for the h* model. I just wanted to know after odin the tmobile imagine were you just able to pop in you're metro im and go? thanx
subun1t said:
im currently downloading the tmobile sm-g360t image( i also have the metro sm-ge360t1) which i had soft bricked by flashing a root for the h* model. I just wanted to know after odin the tmobile imagine were you just able to pop in you're metro im and go? thanx
Click to expand...
Click to collapse
Ya bro I did the extact same thing with the H root. Just put the boot.img in a tar and flash it like u did the H and it will fix it. You might get a security message after but u can just go to Kies and update back to stock if you dont mind losing all your data. Cheers.
The whole rom isn't tested
subun1t said:
im currently downloading the tmobile sm-g360t image( i also have the metro sm-ge360t1) which i had soft bricked by flashing a root for the h* model. I just wanted to know after odin the tmobile imagine were you just able to pop in you're metro im and go? thanx
Click to expand...
Click to collapse
I extracted just the boot.img and made my own tar to flash just the kernel, which was the problem. Flashing the whole rom isn't what you need to do in this case. Just make a mental note that you can you use the boot.img and recovery.img to get back into android.
Hello this is androidadmirer
i recently bought a samsung galaxy core prime from metro pcs
out of the box lolipop 5.1.1
i have an idea how to break this phone loose
but i need some input from you all to see if i'm wrong or if this is possible
so my plan is to use odin to flash the samsung core sm-360hu version firmware and they have a working twrp recovery
then make a rom with the t mobile firmware and insert su in bin and xbin (the t mobile firmware works perfect because it's the same network and same android 5.1.1 o.s
this sounds really good in theory but i don't know if i am totally right
can someone chime in on this please
any help will be very appriciated
Let me know
androidadmirer said:
Hello this is androidadmirer
i recently bought a samsung galaxy core prime from metro pcs
out of the box lolipop 5.1.1
i have an idea how to break this phone loose
but i need some input from you all to see if i'm wrong or if this is possible
so my plan is to use odin to flash the samsung core sm-360hu version firmware and they have a working twrp recovery
then make a rom with the t mobile firmware and insert su in bin and xbin (the t mobile firmware works perfect because it's the same network and same android 5.1.1 o.s
this sounds really good in theory but i don't know if i am totally right
can someone chime in on this please
any help will be very appriciated
Click to expand...
Click to collapse
Let me know if that custom recovery works if not u can use the sm-g360t (t-mobile) to get back though if I remember right the phone has to be rooted for twrp to work right not sure....also you should be able to get the stock rom from smart switch if you force the update that way you have the rom that was made for it as a base...I will try and get the rom and post it I was just checking and there is an update. Let me know
Jedijaded said:
Let me know if that custom recovery works if not u can use the sm-g360t (t-mobile) to get back though if I remember right the phone has to be rooted for twrp to work right not sure....also you should be able to get the stock rom from smart switch if you force the update that way you have the rom that was made for it as a base...I will try and get the rom and post it I was just checking and there is an update. Let me know
Click to expand...
Click to collapse
im gonna try and flash the galaxy grand prime rom and then use odin to flash a recovery on it because its only 4.4.4 so my thought was to flash the "downgraded 4.4.4" then flash the twrp and then make a rom from the t mobile odin firmware
where is the link? thanks
Jedijaded said:
Ok so I should have more faith in myself. So by the end of my nightmare I messed up my boot AND my recovery and could only get into download mode. On a hunch I got ahold of the stock rom for the SM-G360T which is the T-Mobile version of this phone and being as they run on the same network(Same company now) the boot.img and recovery.img WORK ON THIS MODEL. Im back in my phone and everything is running perfect. So for those out there that know WAY more about making roots and roms you might be able to use this stock rom to finally root this monster. Or at least if you soft brick your device you can use these files to get back into your phone until we are able to get the stock rom for this phone. The link to the stock rom for the SM-G360T is below. Hope we get a root for this phone soon. THX!
Im a noob poster on Xda so I cant link it but just go to sammobile.com and search for SM-G360T and make sure you sign up and activate ur account its free you just have to do that or the download link is broke. Have fun.
Click to expand...
Click to collapse
Hi. Can you post the link to download the firmware ? Thanks
SM-G360T1 "boot.img" And "recovery.img" Files
I just uploaded the "boot.img" and "recovery.img" from the latest stock update for the SM-G360T1 on this thread here if anyone needs it in the future.
http://forum.xda-developers.com/showpost.php?p=62457159&postcount=42
EDIT: Updated this post today with ODIN flashable boot and recovery files. Be sure to read the whole post before flashing. Thanks!
I tried the F, H, & "lte" versions firmware, still no positive results, I keep having to flash back to the stock boot.img and recovery.img that bogarty has just linked above.... we need to find a way to unlock this bootloader on this devicez firmware... TWRP seems so close to working.
Huh?
TEFjLONjDON said:
Ok so Unlocking the Phone for use on other carriers is not the same as unlocking the bootloader. thank fully our bootloader is not locked... But it is always a good idea to completely free your device.. SO
As long as you own your device out-right and it was purchased >90 days ago, then Metro cant say no.
This post is just for those that don't already know, (make sure you do this first before you flash a recovery or try a root method)
The Samsung Galaxy Core Prime comes locked from Metropcs by default. But after you buy it and its yours..
just call them @ (+1-888-8METRO8) or (1-888-863-8768)
1. Ask for tech support
2. Ask for the unlock code,
3. Tell them you leaving the carrier.. or the country.. and they will give you the unlock codes (plural 2 codes one for the Device and the other for the Sim card if you say your leaving the country).
4. Put in the code and your good to go..
PS... Its your device.. Bought and payed for...... They really can't say NO..........
Click to expand...
Click to collapse
Thx for the random post that has nothing to do with what we are talking about.
Something new to play with...
OK so i got a TWRP recovery to flash but when I get in there my screen is disable. Maybe you guys can play with it and see what u get here is the link
dl.twrp.me/coreprimelte/
P.S. Two more posts and I can post real links sry....lol
Happy rooting..* Root has been achieved for our device check it out herehttp://forum.xda-developers.com/showthread.php?p=62859013 on the other thread.
Sent from my SM-G900T using Tapatalk
Have you been checking the other posts? Root is here!
Anyone have a custom rom for this device yet?
Jedijaded said:
Thx for the random post that has nothing to do with what we are talking about.
Click to expand...
Click to collapse
so i did the root on my phone.... Can i still unlock my phone?
send from hdx 7 using tapatalk
I didnt found a way to unlock my sm-g360t1, i made the root and tryed several boxes that told me "device unlocked" but wasnt true. Have to pay 24 bucks online to whitelist imei and unlock it trought the device unlock app. I flashed the stock rom from sammobile before but maybe works with the rooted phone too. Problem solved for me
so i got the frp message. odin flashed stock recovery and boot now it gets stuck on the metro pcs screen..... FML can anyone help me fix this problem ?
I had to flash the stock from sammobile SM-G360T1 is what you have to search for then start over but make sure the oem unlock is switched to in that causes the frp (factory reset protection)
---------- Post added at 10:49 PM ---------- Previous post was at 10:36 PM ----------
Or just wait If I remember correctly it took my phone several minutes to boot after flashing stock
Sent from my SM-G360T1 using Tapatalk

Categories

Resources