Hey dudes
So I'm on temasek's cm 11 rom, and yesterday, my battery died(it needs to be replaced, because the phone can't tell me how charged it is...) without going through the usual "shutdown" procedures. Now when I turn it on, put the pin in and stuff, it showed upgrading apps(???), and then loaded up. Now, nothing shows in that navigation/notification panel thing, and the home button isn't working. Otherwise it seems fine. Is there any way to fix this issue without flashing and losing everything? I tried flashing to a newer rom without a factory reset, but the notification panel and home button are still not working.
Any help is really appreciated!
Related
Hey guys I did a quick search but couldn't find anything specific. Randomly, the Y, H, and B keys on my atrix have stopped working. When I hit them I sometimes get nothing, or sometimes it gets the key next to them. If I try and swype across them, it will stop right at that line that all these keys are on. Any ideas on what this might be and how to fix it? I have rebooted and cleaned the screen. I'm running Cognition beta rom (had to flash back from CM7 in an emergency using CWM).
I'm really hoping this isnt a fried digitizer...
I can't remember which rom I'm on (probably the one in my signature, can't remember if I updated it since then lol), but I've been having this issue for a little while now, but sometimes (can't quite figure out what triggers it) I lock my phone and my screen won't turn back on when I hit the lock/power button to turn it back on. Also sometimes I go to lock my phone and the screen will turn off then immediately back on, showing the lock screen. I love everything about the rom except this bug. I don't want to have to pull the battery constantly and it's getting very annoying. I do know I'm on 3.6, but can't remember which rom I'm on. Please help!
Flash different rom? If it sticks on another rom, it's a hardware issue, and you should get it replaced by Verizon
I had this same exact problem I posted about a while back. I linked it to my use of turboprop. Everytime i hit the on button the backlight would turn on but the ui would never come up. Reflash your rom and not turbo after a good wipe. my problem got fixed.
Weirdest issue I've ever come across.
Phone is less than 2 weeks old and was working fine. No hard drops, no water damage. I was running CM 10.1 (3.1.10 Blade Kernal) without issues until today. All of the sudden the capacitive buttons stopped responding. The backlight still comes on.
I flash a recovery to Paranoid Android which I tried out before, still doesn't work. Pie controls work, but on screen navigation buttons don't respond.
In TeamWin Recovery the on screen navigation buttons also don't respond, which is super annoying since I can only do one task, and then have to hard reset my phone.
I did a factory reset and they still don't work. Any idea what's going on here?
chrriiiss said:
Weirdest issue I've ever come across.
Phone is less than 2 weeks old and was working fine. No hard drops, no water damage. I was running CM 10.1 (3.1.10 Blade Kernal) without issues until today. All of the sudden the capacitive buttons stopped responding. The backlight still comes on.
I flash a recovery to Paranoid Android which I tried out before, still doesn't work. Pie controls work, but on screen navigation buttons don't respond.
In TeamWin Recovery the on screen navigation buttons also don't respond, which is super annoying since I can only do one task, and then have to hard reset my phone.
I did a factory reset and they still don't work. Any idea what's going on here?
Click to expand...
Click to collapse
As per more experienced developers and contributors - parandroid is a mess (I am not sure whatever that means , since I have so far only tried CM 10.1 & Slimbean... )
Addicted2xda said:
As per more experienced developers and contributors - parandroid is a mess (I am not sure whatever that means , since I have so far only tried CM 10.1 & Slimbean... )
Click to expand...
Click to collapse
Well I first experienced the issue running CM 10.1.
Since then I've relocked it and loaded the stock RUU where things got REALLY weird. The navigation keys still didn't work and soon nothing was really responsive. I can't even get past the unlock screen. The ring bounces when I touch it but it won't drag and unlock. So it's still detecting something, but it's not really responding at all. I can't even turn the thing off now as holding the power button down restarts the phone. what is this i don't even....
bump!
I need help with this and after extensive searching, I haven't found anyone else with this sort of problem.
I'm trying to install a ROM via TWRP but my capacitive and on screen navigation buttons don't do anything, so I'm stuck without a ROM at the moment.
Today I got my phone in. I was on the first set up page and it wouldn't respond to any of my touches. The buttons would glow like I was touching them but it wouldn't type or input. I soft reset it. It worked when I used assist touch. I hard reset it, wiped cache and factory reset. It fixed and I installed all my apps and when I plugged it into the charger it stopped working again. I can open the camera by double pressing the home button to unlock my phone but i can't open anything. It will glow like I'm pressing it but it won't open. I can pull down my notifications bar but none of my toggles or setting icon will work, again, they will glow just not open. I came back to my room and randomly it was working again, after 5 mins it stopped again.
Thank you for your attention.
ATT 64 GB
Galaxy S6 (not edge)
I don't know if this is the cause/solution to your problem, but I know S Voice can cause lag issues. By default, double pressing the home button (when device is unlocked) opens the S Voice. Frankly, it's redundant and pointless, as it's a mediocre attempt at Google Now. Open it, then go into the settings, and disable it. It causes lag because it's waiting to see if you're going to press it again or not.
But if that doesn't fix it, and it's doing that stuff before you've even set it up, I'd tend to think you've got a faulty unit. The capacitive buttons are part of the screen/digitizer, so maybe you've got a bum one.
I've bought this phone around february/march 2018. I've been using an LOS 15.1 unofficial rom last updated april/june which has been working perfectly, no problem besides no VoLTE but i don't mind this.
I booted the phone into recovery (longpressing power button, then selecting with touchscreen the "reset option". It turned and then couldn't select any button via touchscreen. The phone reseted itself by the first time and got into this! Now touchscreen don't work (so i can't turn it off -it just restart when I longpress for 5 secs the power button), can't unlock it because I set it to ask me the pin on every reboot..
As a sidenote, the phone fell of my desk like 2 months ago, and changed it's entire screen tile (the LED and the glass) for another one because the original one got shattered and made the device unusable. I'm thinking it's a malfunction of this module (or maybe something disconnected? Is this possible)
Anyway, tomorrow i'm going to ask the guy who changed it for help. BUT, is there any other possible fix guys? Or a hard keys combination to completely turn it off so I don't get more messages and save battery?
Thanks a lot!
Just flash stock MIUI via adb n it will work ?