Related
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.
10. ROOTED!
Beoxoeb said:
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.
10. ROOTED!
Click to expand...
Click to collapse
Hi, the language is only english? Thanks.
stefanuccio12 said:
Hi, the language is only english? Thanks.
Click to expand...
Click to collapse
I am Spanish but im posting that in English because is the official language on this forum, just use the google translator, anyway if you have any specific question i will answer you ASAP, send me a private message if you wish
If you are asking about the language of the ROM, is in all languages, is an LG official one (E-425)
Beoxoeb said:
I am Spanish but im posting that in English because is the official language on this forum, just use the google translator, anyway if you have any specific question i will answer you ASAP, send me a private message if you wish
If you are asking about the language of the ROM, is in all languages, is an LG official one (E-425)
Click to expand...
Click to collapse
Thanks! I have try then ROM, but the touch button (back and menu) do not illuminate... sin
Anyway Good Job! I have finally rooted my device
Beoxoeb said:
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.::
10. ROOTED!
Click to expand...
Click to collapse
Hello to all visitors of the "XDA": D. Then giving no downloads A link to how you find them and how to follow the instructions you sir? Supposed to say something but was actually not say anything new .Here send links and other stuff sicred my E-mail: [email protected] skype: asan.onbashi[
asan79onbashi said:
Hello to all visitors of the "XDA": D. Then giving no downloads A link to how you find them and how to follow the instructions you sir? Supposed to say something but was actually not say anything new .Here send links and other stuff sicred my E-mail: [email protected] skype: asan.onbashi[
Click to expand...
Click to collapse
The "new" thing is using E-425 ROM instead of E-435 in order to avoid the home, back and menu buttons stop working and the dual sim notification errors, but is not a perfect solution because the back and menu keys backlight LEDs are disabled although they still responding to touch, i found this method by myself, but probably more people found this way as well, and of course, it was not my intention taking credit from theirs, cheers!
This didn't work for me on LG E430
After installing the v10e firmware it kept saying that various processes are stopping
I had to install the official firmware v10d for my phone to work again
I rooted my LG E430 after this link:
http://forum.xda-developers.com/showthread.php?t=2403230
gixy08 said:
After installing the v10e firmware it kept saying that various processes are stopping
I had to install the official firmware v10d for my phone to work again
I rooted my LG E430 after this link:
http://forum.xda-developers.com/showthread.php?t=2403230
Click to expand...
Click to collapse
I never had issues related with stopping processes on my e430, but if you got a proper rooting using this tutorial on the original firmware i will try it, thanks for sharing this method
???
to use framaroot you dont need to use kdz!
kdz is used to flash
and framaroot is used to root
they are 2 different things bro!
AXD96 said:
???
to use framaroot you dont need to use kdz!
kdz is used to flash
and framaroot is used to root
they are 2 different things bro!
Click to expand...
Click to collapse
Framaroot don't work on e430 yet, but is working on e-435 and e-425 (very similar phones), you can flash one of those instead of the original ROM because the phone is compatible, but aparently gixy08 found a post with a better way using other program in order to root on e430 directly :victory:
Beoxoeb said:
Framaroot don't work on e430 yet, but is working on e-435 and e-425 (very similar phones), you can flash one of those instead of the original ROM because the phone is compatible, but aparently gixy08 found a post with a better way using other program in order to root on e430 directly :victory:
Click to expand...
Click to collapse
Hello Beoxoeb
Do you tried this method (link of gixy08)? Can you confirm that it works for E430?
And no problems?
regards Odiad
odiad said:
Hello Beoxoeb
Do you tried this method (link of gixy08)? Can you confirm that it works for E430?
And no problems?
regards Odiad
Click to expand...
Click to collapse
Not yet, im very busy now, but when i have time i will give it a try.
Beoxoeb said:
Not yet, im very busy now, but when i have time i will give it a try.
Click to expand...
Click to collapse
Hello Beoxoeb, please report when you've tried.
Regards Odiad
Hi, it doesn't work for me. If i press power button + volume down, nothing happens and the phone boots normally.
Hi
Beoxoeb said:
The "new" thing is using E-425 ROM instead of E-435 in order to avoid the home, back and menu buttons stop working and the dual sim notification errors, but is not a perfect solution because the back and menu keys backlight LEDs are disabled although they still responding to touch, i found this method by myself, but probably more people found this way as well, and of course, it was not my intention taking credit from theirs, cheers!
Click to expand...
Click to collapse
Thanks but how do ispalnim instructions with downloads A that there is nowhere to write take along with one.Wou direction short measure links (enternet address).If you wish not want you to find a way to direct users to the right of XDA downloads A but obviously you do not want and would rather just something Namik yasno.Publish precise instructions with exact links please not this conundrum where we would suggest a link to thing .Thanks for your attention.
****Greetings!..
I found a way to root my LG e430 that doesn't requires flashing the ROM or Command Promt.The only ''problem'' is that has the chinise SuperUser but you only have to press the Right button in order to give you the permission...here is the method.
http://forum.xda-developers.com/showthread.php?t=2403230
Enjoy!
Sent from my rooted LG Optimus L3 II
nice
Beoxoeb said:
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.
10. ROOTED!
Click to expand...
Click to collapse
Just made an acount to say thanks...works like a charm...I tryed all tutorials, even with the chinese root...no result, It didnțt detect my phone.
+ back and menu button work
Hello @Beoxoeb,
I wanted to ask you If with this root method you can move apps to the phones SD Card or at least uninstall system apps such as Google Chrome.Is that possible?
Sent from my LG Optimus L3 II
A little help..
I've managed to root my LG E430 with this tutorial, thanks for that , but I have a problem with my 'back and options' buttons, their light is gone... The 'home' button also, although it shows a signs of life sometimes (with some apps and sometimes on notifications).
So my questions are:
1. Is there a way to 'add' this settings to the system (cause my guess is they were deleted/misplaced from the system)?
- via android SDK on PC, file manager, or something else (just guessing )
2. Is there a KDZ file for the e430, the original one ?
- used for unroot or fetch the settings for the original one
---
Thanks again for the tutorial and thanks in advance for my questions,
dnisko
Help
beoxoeb said:
hello guys! I finally found the way to root this terminal without losing any functionality (home, menu, back buttons and led notifications working).
Steps:
1. Set your device on download mode (shutdown the phone, then press "on + volume down") and connect via usb on your pc
2. Download this file: M eg a.co . N z /#!agxrtzda!z0ni-g5eg9d-x9yewvckcfn8hpywvbex6ycop5mtqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install msxml 4.0 sp3 parser (msxml.msi)
4. Run kdz_fw_upd.exe
5. Set "type" on "3gqtc" and "ponemode" on "diag"
6. Select v10e_00.kdz from the folder that you downloaded
7. Click on "launch software update" and wait a few minutes
8. After it finished, put framaroot-1.6.0.apk on your sdcard or internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute framaroot, use gandaf exploit.
10. Rooted!
Click to expand...
Click to collapse
when i press launch it says phone not found it doesent even show on the my computer folder helllllllllllllllp :'(
I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
satawat.thongsawat said:
I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
Click to expand...
Click to collapse
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Does it sync your Google contacts correctly? If so, what did you need to do to get that working?
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
satawat.thongsawat said:
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
Click to expand...
Click to collapse
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
vyming said:
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
Click to expand...
Click to collapse
This is a Chinese ROM?
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
satawat.thongsawat said:
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
Click to expand...
Click to collapse
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
gregou said:
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
Click to expand...
Click to collapse
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
satawat.thongsawat said:
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
Click to expand...
Click to collapse
We'll get Kikat firmware on this phone for sure, we just have to wait from Huawei to rolling out this version.
It's not portions of google apps as when you do this procedure i explained, ALL the gapps are installed automatically on the phone.
Basically, Huawei made a script in the phone for not allowing these apps to be installed, but when you rename this file, the script is no longer available, then all the gapps are installing after the next reboot !
Mediapad X1 7D-503L
The only deference is the directory:
/ cust / channel / charm_china_l / xml / ( charm_china_l not charm_china_u)
and i use the command as su
mount -o rw,remount -t rootfs /cust
because when It try to rename the UNSTALL_APK.XML I take the error "Read-only file system"
thanks
X1 undetectable by the PC
I have GApps Syncing quite fine without rooting, except the contacts sync which is missing from the sync list. I see your steps are very straight forward, but unfortunately my X1 is not recognized by the PC, although I've installed HiSuite from Huawei website. I've also tried to install Huawei device driver for X1 from this site, but still unrecognized. Accordingly GeniusRoot is unable to detect and root my X1.
I'm Win 8.1 (both 32 and 64 bits), and I've tried to do all these procedures with Compatibility model for Win7, run as administrator, yet the X1 is till not detected by the PC.
Also USB Debugging is enabled in Developer Options.
Any idea what's the reason for this?
More info about my version:
Baseband: 21.529.00.00.000
Kernel: 3.0.8-01317-gcd83a45 [email protected] #1
Build Number: 7D-501uV100R001C233B013
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address :
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
sordanny said:
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
Click to expand...
Click to collapse
OK I managed to figure out the solution
Used Root File Manager to rename and voila!! Renamed the file, restart device and got all the Google stuff setup on the phone
Now there is this second problem which is a big pain in the arse
I can't add a second Google account on the phone to get all my contacts..........
Under settings -> accounts -> add account -- there is no option to select "Google" !!!!
Have anyone also face this problem and is there any solution??
Thanks in advance for the help
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
I can confirm this is true. I did a search for "gms" rather than Google - tap on the big link you get at the top of the results page, which takes you to a page of all the Google apps and services, and install everything! (You can always uninstall what you don't need later). No root required, and everything is syncing properly - calendar, contacts, tasks etc. Super easy.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Have you got Google Contacts Sync in your list of downloaded apps?
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Danny here's how to fix it, and u don't need root
if u have rooted and edited the unstall_apk.xml, best is download and flash the stock ROM first:
http://consumer.huawei.com/cn/support/downloads/detail/index.htm?id=20241 (click 立即下载 on the right)
u can also ignore it but all preinstalled google apps will become system apps, and if u've deleted some huawei bloatware u might not be able to OTA update latest B006 firmware
All the Google stuff can work perfectly even can add multiple Google accounts. Best thing is, u don't need root. Here's how:
1) Go to app centre - all - brand and look for the one with 谷歌 (sorry I've updated app centre and it might be different if u haven't update)
2) Download 联系人同步服务, 日历同步服务, Google Playstore, Gmail and Google plus. The rest can be downloaded from playstore
3) After install, open either playstore or gmail and sign in
At this stage, Google is already setup properly with contacts sync just it cannot add multiple Google accounts. Workaround:
4) Open Google plus. Settings - add account
And voila. The phone is perfect now
There's also an OTA update for the LTE version which updates your phone firmware to 7D-503LV100R001C233B006
Cool new features includes double tap screen on, some control over notification flash light for messages and background battery optimization :good:
[Update Aug.15.2014]
Huawei release a full stock Kitkat Update ROM...the one that is avaialbe OTA . Download from links in original post
501U R002 B010
503L R002 B010
[Update July.31.2014]
Huawei release a update to the JellyBean based ROM, the full ROM can be downloaded via links below in the original post for the corresponding models. Since it's based on the original JB ROM, dpi is 320 instead of 400 in the KitKat rom.
501U R001 B019
503L R001 B007
[Original]
Been following the Chinese forums and using google translate to read them....B007 firmware KitKat 4.4.2 with EMUI 2.3 has just been released today, July 10th, 2014. Link and instructions are listed below.
~~Caution: Update will wipe out user data, backup all data & apps before updating~~
~~Note: If you don't like B007 new 400dpi size, you can downgrade back to B006 by following the same directions with the B006 ROM file
~~Download
7d-501u
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=48
7d-503L
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=64
~~Note/Changelog
1 The upgrade package for the card brush (external SD card or X1 itself storage are possible);
2 Upgrade lose data (such as text messages, contacts, installed applications APK , etc.), data backup before the upgrade is strongly recommended , data can be backed up through the "cloud applications" in the "backup" software.
3 first upgrade process, please try not to touch the screen , the new version will be a touch screen calibration, if there is abnormal, then the screen will automatically repair if hand contact will affect the accuracy of the calibration or not calibrated .
Update Description:
The main new features :
1 new magazine lock screen (not support online update)
2 new super power saving mode
3 new online font
4 new Bluetooth MAP
5 new camera watermark function
The main system optimization :
1.An optimization of available memory, increasing 200M
2.under a variety of scenarios to optimize the photographic effect
3.optimize font display, micro-channel applications such as larger font
4.optimize ease of e-mail
5 touch screen experience optimized to increase the repair function automatically detects
6 optimize WiFi firmware, more stable long-term use
7 fixes 3G call quality problem under weak signal
8 TD repair mobile network from 3G to 2G handover probability of failures
9 When the noise floor Bluetooth phone repair problems
~~Instructions (Google translated)
1.1 SD card directory structure upgrade package
to upgrade the SD card directory structure:
| - dload (directory)
| - update.app (SD card upgrade package, Required)
| - onfg.cfg ( Required)
| -. auto_upgrade cfg (file)
1.2 Upgrade Process
1.2.1 Note
1) SD card before you upgrade, back up your user data.
2) When you upgrade to ensure that power more than 30%, or plug in an external power supply.
3) Please ensure that the SD card has enough memory space (> 2G) to prepare copies of the upgrade package, and ensure that the SD card file format is FAT32 (test method: SD card can be inserted into the card reader, then connect to the PC this when my computer on the PC will be a removable disk drive. Right select the disk, left click on the pop-up menu "Properties" to see the disk file system should be FAT or FAT32. NTFS format if it is, then the cards can not be used to upgrade).
4) Before the upgrade is complete or upgrade an exception, do not remove the SD card or the power, do not press the POWER button.
5) upgrade process if power interruption occurs, try again with the SD card upgrade.
1.2.2 SD card automatically upgrade
1) Make sure dload folder (contains update.app, onfg.cfg) and auto_upgrade.cfg complete copy of the file to the root directory of the SD card 5.2) Insert the SD card into the veneer
3) The SD card is inserted into the glory X1
4) glory X1 boot automatically into SD card upgrade (if the machine is turned on, then you restart the machine)
5) When the machine with a screen, the normal upgrade process, the screen displays the following figure
6) After a successful upgrade The screen displays as shown below, and then the machine will automatically restart 7) to confirm whether the version upgrade was successful: go to "Settings" - "About tablet" - "version number" in the query the current version number to confirm that the upgrade was successful. 8) When the machine with a screen, the upgrade fails, the screen displays the following diagram: If the upgrade fails, make sure that a copy of the upgrade package is complete, the storage path is correct, but in the SD card root directory will generate log file upgrades. With this log file, you can upgrade the reason for the failure to locate.
[Source http://cn.club.vmall.com/thread-573091-1-1.html]
Just finished updating....and WOW!!!!
Vast improvement....EMUI 2.3 is polished, quick and very responsive (but probably used Nova)
Everything is faster ...probably due to KitKat 4.4.2.
One MAJOR issue is that Huawei change the DPI...the icons and text will be larger. This change was in response to Huawei's forum users saying text was too small.
Update: Unable to root via current RootGenius 1.8.7en, 1.9.6, KingoRoot 1.2.2, AnzhiRoot 1.5.0
I lost play store after update .... but i just download the apk and install .. it works fine ... thanks
Just installed and the font is too big for me. The performance is better.
Antutu Score : 23637
Can not install some of application like FIFA 14. They said it is not compatible with the device.
I had to install Google+ for second Google account but it also has compatibility issue.
But you can add second Google account on YouTube app.
I've just received the Mediapad X1, 501u firm.
To install the Kitkat 4.4.2, should I root the unit first?
Thanks in advance!
No, you don't have to rooting. Just follow the instruction.
Sent from my X1 7.0 using XDA Free mobile app
wowcode said:
No, you don't have to rooting. Just follow the instruction.
Sent from my X1 7.0 using XDA Free mobile app
Click to expand...
Click to collapse
Upgraded to KitKet 4.4!
Thank you a lot!
wowcode said:
Just installed and the font is too big for me. The performance is better.
Antutu Score : 23637
Can not install some of application like FIFA 14. They said it is not compatible with the device.
I had to install Google+ for second Google account but it also has compatibility issue.
But you can add second Google account on YouTube app.
Click to expand...
Click to collapse
I have some apps that also show up as "incompatible with your version"...it's due to the change in LCD density value from 320 to 400. Hopefully someone finds a work around for this .
7D-501L
Can you update 7D-501L with 7D-501U? Did anyone tried it yet? Please let me know because I would love to upgrade my phone.
whoaw , DL speed is impressive , about ....0bps .... lol
if anyone had DL rom before and can post it on Mega , it will be great ( i need rom for 503L )
for who's tested, can you restore all googles app , by rooting/modify the xml file ?
upgrade by OTA will not work ? ( like from B002 to B006 ) ?
did the B007 will now accept 64G micro SD in ExtFAT ( fat64 ) ?
Dead-Eye said:
Can you update 7D-501L with 7D-501U? Did anyone tried it yet? Please let me know because I would love to upgrade my phone.
Click to expand...
Click to collapse
Not sure if anyone tried yet...
Z e k said:
whoaw , DL speed is impressive , about ....0bps .... lol
if anyone had DL rom before and can post it on Mega , it will be great ( i need rom for 503L )
for who's tested, can you restore all googles app , by rooting/modify the xml file ?
upgrade by OTA will not work ? ( like from B002 to B006 ) ?
did the B007 will now accept 64G micro SD in ExtFAT ( fat64 ) ?
Click to expand...
Click to collapse
needrom.com has a post for the B007 503L, I haven't registered, so not sure whether its a link to EMUI or a mirror
http://www.needrom.com/mobile/x1-7d-503l/
I tried rooting with RootGenius, but it failed...I was debating weather to use one of the "banned" rooting programs due to security concerns. In the end, I tried it anyways without success. No Root = no modify XML. You can still get Google Play via the Huawei App Center, search for "GMS" and click on the google banner and download google play store, then download apps from official play store . While you are at the Huawei app center, you also need to download both "Google Sync" programs, (1) with calender icon and (1) with contact icon to be able to sync.
To add multiple Google accounts to the X1, you need to download Youtube or Google Maps and add an account through those apps, there is no option to add accounts in settings.
OTA will not update fom B002 or B006 if you are root (from what I read)
Regarding 64GB SD card: B007 will not do NTFS or exFAT...BUT it will automatically format your card to FAT32 (which is a plus) Available storage 64GB card = 59.46GB. I have a 64gb Micro SDHX card, not SDHC...I could not get it to work on B006 even with FAT32.
thank's for your response.
the rom download on needrom is fast ( about 1 minute for the 998mo , lol )
it is not a good news for not to be abble to root the device , i use ESroot explorer many time ( to transfer file directly from my device to my servers ) , titanium backup for ... backup my data and remove ugly apk ( or chinese that i cant use ) and airdroid to control my phone by my mac ( even i forget it at home , lol )
did you try Anzhiroot for root B007 ? ( root genius will not work on my B006 4G mediapad, and anzhiroot yes , i hope that perhaps it will work in B007 )
for the 64GB card, on the B006 , it can be formated in FAT32 only, but it is very slow ( i know that fat64 is more fatest than fat32 )
i use a samsung SDHC class10 , and it is very slowly than my old samsung 32Gb class8 ....
Just upgraded to 4.4 Kitkat, but I can't install TASKER ("your unit is not compatibel with this version")
Anyone has successfully installed Tssker?
7D-501L Upgrade
OP - Thanks for the reply...
I guess I just need some courage and go for it...On the NeedRom website is showing this:
ROM Huawei 7D-501L – ROM Android 4.2.2
Update Official ROM Huawei 7D-501L Unicom version: 7D-501u_EMUI_2.3_V100R002C233B007
It looks harmless enough...I will post if everything went okay or not...*** Wish me luck ***
Since updated my internet connection keeps switching to 2G very often and there is no option to use 3G only. Is there any hidden menu i can use to put 3G only?
Thank you
Z e k said:
did you try Anzhiroot for root B007 ? ( root genius will not work on my B006 4G mediapad, and anzhiroot yes , i hope that perhaps it will work in B007 )
Click to expand...
Click to collapse
Seems like anzhiroot is an older version of rootgenius...tried it...also failed
Dead-Eye said:
OP - Thanks for the reply...
I guess I just need some courage and go for it...On the NeedRom website is showing this:
ROM Huawei 7D-501L – ROM Android 4.2.2
Update Official ROM Huawei 7D-501L Unicom version: 7D-501u_EMUI_2.3_V100R002C233B007
It looks harmless enough...I will post if everything went okay or not...*** Wish me luck ***
Click to expand...
Click to collapse
Let us know how it goes...maybe all units have the same hardware..but software profile activate different bands.
thyk888358 said:
Since updated my internet connection keeps switching to 2G very often and there is no option to use 3G only. Is there any hidden menu i can use to put 3G only?
Thank you
Click to expand...
Click to collapse
With 3g preferred...if 3g signal is strong it will use 3g...else it will drip down to 2g. If it was 3g only and 3g signal is weak...you will get no internet at all. Not sure if they changed the modem/baseband files...didnt pay attention to B006.. That may be why ...
7D-501L Failed...
Well the upgrade has failed. Trying to upgrade 7d-501l to 7d-501u. As it was going through the upgrade checks, it was saying successful but around 40%-50% I got this error:
"FAIL" = Detected the upgrade package can not be adapted to your tablet...
Any suggestion??
MODEL: Mediapad X1 (International Version) 7D-501LV100R001C199B003
acuratlsfan said:
Seems like anzhiroot is an older version of rootgenius...tried it...also failed
Let us know how it goes...maybe all units have the same hardware..but software profile activate different bands.
With 3g preferred...if 3g signal is strong it will use 3g...else it will drip down to 2g. If it was 3g only and 3g signal is weak...you will get no internet at all. Not sure if they changed the modem/baseband files...didnt pay attention to B006.. That may be why ...
Click to expand...
Click to collapse
Thank you .. i think the new baseband is not good at my country ... too bad i can't go back to my previous 4.2.2 ..
Dead-Eye said:
Well the upgrade has failed. Trying to upgrade 7d-501l to 7d-501u. As it was going through the upgrade checks, it was saying successful but around 40%-50% I got this error:
"FAIL" = Detected the upgrade package can not be adapted to your tablet...
Any suggestion??
MODEL: Mediapad X1 (International Version) 7D-501LV100R001C199B003
Click to expand...
Click to collapse
At this point ... You should probabky wait for an official 501L ROM . I'm assuming it shouldn't be long ...beats having a $400 brick.
B007 is faster ... But the big font is annoying pretty much everyone. I can barely type correctly...the keyboard is literally half the screen !
acuratlsfan said:
At this point ... You should probabky wait for an official 501L ROM . I'm assuming it shouldn't be long ...beats having a $400 brick.
B007 is faster ... But the big font is annoying pretty much everyone. I can barely type correctly...the keyboard is literally half the screen !
Click to expand...
Click to collapse
OP - Thanks.
Yes you're right don't want to have a $400 brick on my desk. Just need to wait a little longer for an release. I hope soon and also hope they make the fonts smaller. Don't want a keyboard taking up half my screen...
Hi All,
I'm new here,
I'm wondering if there is any chance to root my Humax H1 android HD wifi receiver,
Thank you,
Best regards.
omaremad82 said:
Hi All,
I'm new here,
I'm wondering if there is any chance to root my Humax H1 android HD wifi receiver,
Thank you,
Best regards.
Click to expand...
Click to collapse
not sure, try kingo with pc and kingroot without pc, if not work wait for custom recovery
XN Logos said:
not sure, try kingo with pc and kingroot without pc, if not work wait for custom recovery
Click to expand...
Click to collapse
thank you, but i have a problem that there is no play store in this box, only something called humax store as a limited apps to install, and when to try to install apk from a flash memory it said: file not supported and when to try to enable from unknown sources it aked for a password, that ieven it's not showing any field to fill the password
up
plz help
omar emad ....
do you found the solution ?
i have the same issue ..
1st every thing was running good ...
even there is no google play store .. but the "unknown sources" was enabled
but after the last update ...
they close and disabled everything ...
i feel ...
i was cheated with this device
omaremad82 said:
Hi All,
I'm new here,
I'm wondering if there is any chance to root my Humax H1 android HD wifi receiver,
Thank you,
Best regards.
Click to expand...
Click to collapse
Hi, i hacked the password, when you press the apk file, it will ask you for password then on the remote press the arrows button: left right left left right up down up up down
then it will open settings then press install from unknown sources, press agree and you are done. After that download kingo root from here: https://root-apk.kingoapp.com/kingoroot-download.htm
Install it, Make shure your wifi is turned on the humax, then connect a usb/wireless mouse or use phone with humax cast app to control the mouse, click root then wait for it to get rooted, if it is stuck in 90% press back on the remote then a fail will show but it is rooted just restart it, delete kingo root then open the superuser app.
(NOT FAKE)
KBJ911 said:
up
plz help
Click to expand...
Click to collapse
I wrote a answer
Hi there,
I have rebranded my ANE-LX1 to the chinese version Nova 3e (to get away from google ). Now I've found that the NFC function is not working. Any ideas? Thanks!
P.S.:Build number: ANE-TL00 8.0.0.180 (C01) , rooted.
avenger.forsyth said:
Hi there,
I have rebranded my ANE-LX1 to the chinese version Nova 3e (to get away from google ). Now I've found that the NFC function is not working. Any ideas? Thanks!
P.S.:Build number: ANE-TL00 8.0.0.180 (C01) , rooted.
Click to expand...
Click to collapse
Hello, I had the same problem, it's just a matter of granting permissions.
Install Solid Explorer (2.8.6 or higher).
Go Product/HW_OEM/ANE-L21/etc/permissions , copy three files android.hardware.nfc..... to the internal storage . Then go HW_OEM/ANE-TL00/etc/permissions and replace the three nfc files with the copied ones. Restart the phone.
-Alf- said:
Hello, I had the same problem, it's just a matter of granting permissions.
Install Solid Explorer (2.8.6 or higher).
Go Product/HW_OEM/ANE-L21/etc/permissions , copy three files android.hardware.nfc..... to the internal storage . Then go HW_OEM/ANE-TL00/etc/permissions and replace the three nfc files with the copied ones. Restart the phone.
Click to expand...
Click to collapse
It works! Thank you man!
Hi,
I want to enable "High contrast text", but I can't for the life of me find where it is
The Chinese version doesn't have this option?
avenger.forsyth said:
The Chinese version doesn't have this option?
Click to expand...
Click to collapse
On EMUI 9.1 only. Running EMUI 8 you need add new setting in Secure table :
"high_contrast_text_enabled" "1"
using SetEdit apk.