Related
Dear
Is there any custom rom kitkat based for karbonn titanium s1 plus?
How we remove the apps from custom rom and how we rebuild it.
thanks in ad
ClockWorkMod Recovery 6.0.4.9 - Download
Terminal Emulator - Download
Place it in /sdcard and rename the file recovery.img
Run the terminal emulator and
type: su (press enter)
Then type: dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 (press enter)
CyanogenMod 11 [Kitkat 4.4.4] - Download
Password: fxpj
Download This package
Extract it to sd card
Boot into Recovery by Powering on while holding power and vol+ Button.you'll see a green screen...Keep holding untill the screen turns red.
Goto Mounts and storage and format /Cache and /Data. Format /SYSTEM if installing new rom.
Goto Advanced and format Dalvik Cache
Select Apply Zip from SD Card
Select Cyanogenmod 11 zip file of rom to install and wait.
Dear
thanks for reply
I have not rooted the phone. Can i flash CyanogenMod 11 [Kitkat 4.4.4] and ClockWorkMod Recovery 6.0.4.9,
Terminal Emulator without rooting the phone?
If i rooted the phone and flash CWM and ROM Manager then Terminal Emulator is necessary to install.
please explain.
thanks
Rooting?
desiboyz said:
Dear
thanks for reply
I have not rooted the phone. Can i flash CyanogenMod 11 [Kitkat 4.4.4] and ClockWorkMod Recovery 6.0.4.9,
Terminal Emulator without rooting the phone?
If i rooted the phone and flash CWM and ROM Manager then Terminal Emulator is necessary to install.
please explain.
thanks
Click to expand...
Click to collapse
Did you managed to root the phone? how?
Hey im just rooted my device successfully. Can i upgrade my rom using built in system updater? There is option to upgrade from sd card.
Sent from my Titanium S1 Plus using XDA Free mobile app
nanachitang420 said:
Did you managed to root the phone? how?
Click to expand...
Click to collapse
hii just download the android kingo rom google any root any phone :laugh::laugh::laugh::laugh:
Sippay said:
ClockWorkMod Recovery 6.0.4.9 - Download
Terminal Emulator - Download
Place it in /sdcard and rename the file recovery.img
Run the terminal emulator and
type: su (press enter)
Then type: dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 (press enter)
CyanogenMod 11 [Kitkat 4.4.4] - Download
Password: fxpj
Download This package
Extract it to sd card
Boot into Recovery by Powering on while holding power and vol+ Button.you'll see a green screen...Keep holding untill the screen turns red.
Goto Mounts and storage and format /Cache and /Data. Format /SYSTEM if installing new rom.
Goto Advanced and format Dalvik Cache
Select Apply Zip from SD Card
Select Cyanogenmod 11 zip file of rom to install and wait.
Click to expand...
Click to collapse
error no space left on device
Same problem
spice mi 270 said:
error no space left on device
Click to expand...
Click to collapse
I'm also having this problem on my device pls give me a working cwm for titanium s1 plus
THANKS IN ADVANCE
spice mi 270 said:
error no space left on device
Click to expand...
Click to collapse
Are you rooted? Can you extract stock recovery for S1 plus and upload here?
Thanks in advance.
yes i am rooted
nanachitang420 said:
Are you rooted? Can you extract stock recovery for S1 plus and upload here?
Thanks in advance.
Click to expand...
Click to collapse
Yes I have rooted mobile and after flashing cwm from terminal emulator I lost my original recovery and even not got the cwm not working..... please help me...
thanks in advance
Try to extract boot.img..
mkmandar123 said:
Yes I have rooted mobile and after flashing cwm from terminal emulator I lost my original recovery and even not got the cwm not working..... please help me...
thanks in advance
Click to expand...
Click to collapse
Me not rooted but flashed CWM S1 with Fastboot and worst tried to insert files to system.img and even overwrite that partition, in turn the phone is just booting only upto boot logo, If you are in position to extract boot.img then please try and upload here. That can be used to build CWM working for our device. If any body gets flash files for S1 plus from service centre then best. We can easily build CWM.
nanachitang420 said:
Me not rooted but flashed CWM S1 with Fastboot and worst tried to insert files to system.img and even overwrite that partition, in turn the phone is just booting only upto boot logo, If you are in position to extract boot.img then please try and upload here. That can be used to build CWM working for our device. If any body gets flash files for S1 plus from service centre then best. We can easily build CWM.
Click to expand...
Click to collapse
How to go in fastboot mode??
mkmandar123 said:
How to go in fastboot mode??
Click to expand...
Click to collapse
Please check you message box. Have given you the details.
Two ways:
1. ADB way. Start adb after connecting phone to PC and type adb devices. If device is shown Titanium then type in cmd "adb reboot bootloader" phone will reboot in fastboot mode.
2. Key combinations: switch off the phone. Press power button and volume up button simultaneously till you see boot logo. connect to PC and see in device manager, you will see a device called Karbonn bootloader interface under title: Karbonn devices.
Try to extract boot.img as per the method given in message box .
mkmandar123 said:
Yes I have rooted mobile and after flashing cwm from terminal emulator I lost my original recovery and even not got the cwm not working..... please help me...
thanks in advance
Click to expand...
Click to collapse
how did u managed to flash cwm,can u plz explain the steps bcoz m getting error that no space left on device and yup m rooted need cwm recovery any how...plz anyone help
---------- Post added at 11:48 AM ---------- Previous post was at 11:42 AM ----------
nanachitang420 said:
Are you rooted? Can you extract stock recovery for S1 plus and upload here?
Thanks in advance.
Click to expand...
Click to collapse
Yes m rooted but dont know how to extract stock recovery,tell me steps I will surely upload it
Got recovery.img and boot.img for S1 plus
I got boot.img and recovery.img for S1 plus now need only cwm or twrp developer...hoping for best..anyone reply asap
Sent from my Titanium S1 Plus using XDA Premium 4 mobile app
titanum s1 plus
spice mi 270 said:
I got boot.img and recovery.img for S1 plus now need only cwm or twrp developer...hoping for best..anyone reply asap
Sent from my Titanium S1 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hii i need a stock recovery image.
because iam earese it from my phone when flashing another cwm which is not for titanium s1 plus
thanks
shivkiran9 said:
hii i need a stock recovery image.
because iam earese it from my phone when flashing another cwm which is not for titanium s1 plus
thanks
Click to expand...
Click to collapse
Download from here. Contains both, stock boot.img and stock recovery.img. Thanks to Spice mi for providing them!!
Bro its my old phone name spice mi 270,my name is Shivam
Sent from my Titanium S1 Plus using XDA Premium 4 mobile app
Hiii...
Is there any 1 custom rom for s1 plus???
I tried with cynogenmod 11 which provided in previous messages in this forum but it gives some errors..
Sent from my Titanium S1 Plus using XDA Free mobile app
akshykhade said:
Hiii...
Is there any 1 custom rom for s1 plus???
I tried with cynogenmod 11 which provided in previous messages in this forum but it gives some errors..
Sent from my Titanium S1 Plus using XDA Free mobile app
Click to expand...
Click to collapse
For rom we need recovery frst
Sent from my C6603 using XDA Premium 4 mobile app
---------- Post added at 06:17 PM ---------- Previous post was at 06:16 PM ----------
For rom we need recovery frst
Sent from my C6603 using XDA Premium 4 mobile app
HERE IS TWRP FOR KITKAT
NOTICE
HTML:
YOUR WARRANTY IS NOW VOID
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE
DOWNLOADS
https://mega.co.nz/#!DM9kBJJA!baKTQHp4KmcYRjV98PWHOlYFjegA_LjiqkVMBaxrSQ4
INSTALLATION PROCESS:
1. CONNECT YOUR DEVICE TO A COMPUTER WHICH HAS ODIN
2. OPEN ODIN ADD THE DOWNLOADED FILE IN AP(PDA) SECTION
3. CLICK ON START(BEFORE THAT UNCHECK AUTOREBOOT)
4. WHEN INSTALLATION COMPLETES AND ODIN WRITES RESET THEN DISSCONNECT YOUR DEVICE
AND TAKE OFF THE BATTERY
5. BOOT TO RECOVERY USING THREE BUTTON METHOD(VOL UP+ HOME+ POWER)
6. CLEAR CACHE AND REBOOT
7. ITS DONE!!!!!!!ENJOY!!!!!
IT WOULD BE VERY GRATEFUL OF YOU IF YOU HIT THE THANKS BUTTON AND APPRECIATE THE WORK IF THIS HELPED:good::fingers-crossed:
PLEASE TEST IT AND TELL ABOUT BUGS
XDA:DevDB Information
TWRP, Tool/Utility for the Samsung Galaxy Grand 2
Contributors
techmate98, ali.filth , techmate98
Version Information
Status: Stable
Current Stable Version: v1.0
Created 2014-08-26
Last Updated 2014-08-28
Reserved
Changelog:
v1.0
initial release
Reserved
Good day, can i request for stock recovery for our grand 2. To avoid flashing the whole firmware when we want to update the device via OTA.
Im requesting stock recovery for kitkat 4.4.2 build G8 and jb4.3
microchip88 said:
Good day, can i request for stock recovery for our grand 2. To avoid flashing the whole firmware when we want to update the device via OTA.
Im requesting stock recovery for kitkat 4.4.2 build G8 and jb4.3
Click to expand...
Click to collapse
Will provide you that too but as i am not on g8 or 4.3 so it will take time
Sent from my SM-G7102 using XDA Premium 4 mobile app
Okay Thnx. Is the recovery different in every kitkat build? Coz now I'm on kitkat G8 build and i flash the CWM NG4 4.4. 2 on top of my build and my CWM is working fine.
microchip88 said:
Okay Thnx. Is the recovery different in every kitkat build? Coz now I'm on kitkat G8 build and i flash the CWM NG4 4.4. 2 on top of my build and my CWM is working fine.
Click to expand...
Click to collapse
Yep. The stockstock recovery is different for each build. If you flash a G4 Stock recovery on a H3 firmware. It WILL flash and you'll be back to to clear data and factory reset too but you won't be able to flash OTA updates. Cause for that, you need the specific stock recovery for your current build.
Please provide the installation guide.
I am on stock NH3 but don't know how to extract stock recovery image. If guided, I can help.
anuajayan said:
Please provide the installation guide.
Click to expand...
Click to collapse
DONE:good::good::good:
microchip88 said:
Good day, can i request for stock recovery for our grand 2. To avoid flashing the whole firmware when we want to update the device via OTA.
Im requesting stock recovery for kitkat 4.4.2 build G8 and jb4.3
Click to expand...
Click to collapse
brother actually i have unrooted my device and returned to stock as i had to give to samsung care as there was some problem coming up in its display sorry but you will have to ask some other member for it
sajidbinraheem said:
I am on stock NH3 but don't know how to extract stock recovery image. If guided, I can help.
Click to expand...
Click to collapse
brother you will hav to first root the set up an sdk on your computer then using adb commands you can get the stock boot image out(busy box should be installed on your device)
Code:
dd if=/dev/block/mmcblk0p34 of=/sdcard/recovery.img
techmate98 said:
brother you will hav to first root the set up an sdk on your computer then using adb commands you can get the stock boot image out(busy box should be installed on your device)
Code:
dd if=/dev/block/mmcblk0p34 of=/sdcard/recovery.img
Click to expand...
Click to collapse
now i see 1 problem, how can we extract the stock recovery in kitkat, coz we need to flash the CWM or TWRP recovery first before we can root the device. i don't see any other method how to root our device without flashing first a custom recovery.
microchip88 said:
now i see 1 problem, how can we extract the stock recovery in kitkat, coz we need to flash the CWM or TWRP recovery first before we can root the device. i don't see any other method how to root our device without flashing first a custom recovery.
Click to expand...
Click to collapse
by flashing a prerooted ROM through odin or using CF-AUTOROOT..
I like the TWRP.. i dont have seen other problem Except that I BACK UP my ROM using S5 PORT ROM. After backing up., i installed the CM11 latest version, after an hour i RESTORE the S5 port rom that i had BACK-UP. But i cannot RESTORE it because it does not appear. What i need is COPY the BACK-UP from EXT-SD CARD to SD-CARD then RESTORE it. Is that the bug or that's the way of restoring it?
REQUEST..
sir Ali.Filth and Techmate98 can we request a FLASHABLE TWRP directly via CWM.. thank you sir. MORE POWER..
Android-secure partition
Is android-secure partition not available in our device or that TWRP 2.7 doesn't have that option? Because many apps in SdCard and when is not option to backup android-secure when restore the backup I don't have apps that in sdcard anymore. need to install that apps again. :crying:
thus this recovery work for K1 stock firmware.
hello,
will this work with G7105/LTE device ?
it does not say in thread for which device its for.
thanks
cookiepuppy said:
hello,
will this work with G7105/LTE device ?
it does not say in thread for which device its for.
thanks
Click to expand...
Click to collapse
can anyone help or answer pls, is this forum dead ? no matter which forum im asking question , it seems no one wants to answer . is this device dead ?
Finally rooted the phone using Kingroot. Now advancing towards porting a custom recovery for the device. The needed files are stock boot.img and recovery.img of the device. My problem is I have tried all the following ways for their extraction -
1) RomDump script 0.72b by Sebastian404
2) cat proc/mtd
3) log_data to find in which partition the recovery belongs to
But no luck, for all.
anybody, who can help me?
Please don't suggest adb process.
aakashabhinav said:
Finally rooted the phone using Kingroot. Now advancing towards porting a custom recovery for the device. The needed files are stock boot.img and recovery.img of the device. My problem is I have tried all the following ways for their extraction -
1) RomDump script 0.72b by Sebastian404
2) cat proc/mtd
3) log_data to find in which partition the recovery belongs to
But no luck, for all.
anybody, who can help me?
Please don't suggest adb process.
Click to expand...
Click to collapse
If u have rooted your phone thn download flashify and backup boot img and recovery img from there.. Thn it will be in your sdcard flashify folder
Hope it helps
Regards
my phone was bricked how to solve this problem
my coolpad dazen 1 was bricked after flashing recovery.img after rooted..
and it got error like "download and instal the packag? this may expose the device falt and hidden troubles."
please help it's urgent... :angel:
use bootloader to flash stock recovery
Bibhudutta Das said:
my coolpad dazen 1 was bricked after flashing recovery.img after rooted..
and it got error like "download and instal the packag? this may expose the device falt and hidden troubles."
please help it's urgent... :angel:
Click to expand...
Click to collapse
i was having the same problem
i tried flashing cwm recovery which was for coolpad f1 plus (as it is same device with qualcomm processor)
and after flashing my device was unable to boot (or stuck on bootloader)
but it can be cured....
you have to download the batch program developed by cool community
and dazen 1 adb drivers
(you will need the stock recovery to put back your device to life)
replace both the given recoveries in the batch program folder with stock recovery and rename it
then enter bootloader mode (both volume buttons+power button)
open batch program on your pc and press 1 and click enter
now connect your device to pc and press vol. up button to continue
and its done.
now I am trying to flash a stable recovery
I am new to Xda so sorry in advance if i missed something
feel free to ask.....
Full guide for unbrick dazen 8297L-100
In the attachment there are stock boot and recovery images and link for downloadin the cool comunity batch programe
jaswant singh said:
In the attachment there are stock boot and recovery images and link for downloadin the cool comunity batch programe
Click to expand...
Click to collapse
where is the attachment?? plz help..
bonny1256 said:
i was having the same problem
i tried flashing cwm recovery which was for coolpad f1 plus (as it is same device with qualcomm processor)
and after flashing my device was unable to boot (or stuck on bootloader)
but it can be cured....
you have to download the batch program developed by cool community
and dazen 1 adb drivers
(you will need the stock recovery to put back your device to life)
replace both the given recoveries in the batch program folder with stock recovery and rename it
then enter bootloader mode (both volume buttons+power button)
open batch program on your pc and press 1 and click enter
now connect your device to pc and press vol. up button to continue
and its done.
now I am trying to flash a stable recovery
I am new to Xda so sorry in advance if i missed something
feel free to ask.....
Click to expand...
Click to collapse
Hello Friend,
Please post the download link for the
1 . stock rom
2. stock recovery
3. and the batch program which you have mentioned.
4. dazen 1 adb drivers
and any other resources which you used to bring your dazen out of brick.
Thanks
Finally fixed my dazen 1.....
Ho....ffff......
Finally managed to bring my dazen back to life... Thanks to bonny1256 for the information..
Found the batch script after serching all forums almost searched down all internet..
Used the recovery that i had backed up using flashify.. I will upload the stock recovery and link to the tool. Shortly... Once again thanks to @bonny1256..
---------- Post added at 12:58 AM ---------- Previous post was at 12:54 AM ----------
The recoveries in the zip is for coolpad F1 plus which need to be replaced by the stock recovery of dazen 1...
---------- Post added at 01:27 AM ---------- Previous post was at 12:58 AM ----------
stock recovery: https://drive.google.com/file/d/0By_nubQ5FzzoSnBiSl9JaGR1YW8/view?usp=sharing
Drivers: http://download.yulong.com///DOWNLOAD_INFO/20141203151613244(4).rar
Note:: this tool will temporarily install recovery.. So after reboot flash the recovery with flashify for a properly working recovery in your phone..
regards..
techy97 said:
Finally rooted the phone using Kingroot. Now advancing towards porting a custom recovery for the device. The needed files are stock boot.img and recovery.img of the device. My problem is I have tried all the following ways for their extraction -
1) RomDump script 0.72b by Sebastian404
2) cat proc/mtd
3) log_data to find in which partition the recovery belongs to
But no luck, for all.
anybody, who can help me?
Please don't suggest adb process.
Click to expand...
Click to collapse
Try..
adb shell
cat /proc/partitions
Or
adb shell
ls -al /dev/block/platform/7824900.sdhci/by-name
need to know partition details of dazen 1
bonny1256 said:
i was having the same problem
i tried flashing cwm recovery which was for coolpad f1 plus (as it is same device with qualcomm processor)
and after flashing my device was unable to boot (or stuck on bootloader)
but it can be cured....
you have to download the batch program developed by cool community
and dazen 1 adb drivers
(you will need the stock recovery to put back your device to life)
replace both the given recoveries in the batch program folder with stock recovery and rename it
then enter bootloader mode (both volume buttons+power button)
open batch program on your pc and press 1 and click enter
now connect your device to pc and press vol. up button to continue
and its done.
now I am trying to flash a stable recovery
I am new to Xda so sorry in advance if i missed something
feel free to ask.....
Click to expand...
Click to collapse
hi @bonny1256
plz help me know the system partition of coolpad dazen 1..
run this
adb shell
ls -al /dev/block/platform/7824900.sdhci/by-name
i had used it to dump system.img.. i am stuck in bootloop after ota..
plz run the command and upload screenshot...
thanks..
Please send the boot.img and recovery.img for coolpad dazen 1.
My mail id is [email protected]
Send Image
Send me the stock recovery and the boot image with instructions on how to get stock rom on my dazen1 pls send it at [email protected]
hi my dazen 1 is showing waiting for the device after using all this... can any one please help me to get correct procedure. please share complete procedure with required software and links @ [email protected]
Please help to recover my phone. It was rooted using Kingroot and while installing OTA update it got bricked.
Is any way to flash full rom or firmware in our device
hey guyss,,,
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
---------- Post added at 06:20 PM ---------- Previous post was at 06:16 PM ----------
ArjunrambZ said:
hey guyss,,,
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
we need to start a new team for our phone ,so that development can be started
please comment below if ur interested
thanks
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
Hi, I have rooted my dazen 1 , now waiting for custom recovery and ROMs to test
vishwasnp said:
Hi, I have rooted my dazen 1 , now waiting for custom recovery and ROMs to test
Click to expand...
Click to collapse
did you root using kingroot ?
Yes, used Kingroot
I am facing lots of issues with call log and sms , they suddenly don't update or become non responsive. Any way to replace them ?
Well with the fact that i just 'Beginner' in android -developer world i spent two days (read and search) to just know what the right steps to have unofficial rom . So this is not thread from professional it's just what i understand so far . (SORRY FOR BAD ENGLISH)
It's some simple Steps :
1) First you need to root your Device to have fully adminstrator . (This make you can execute terminal order from you and the apps)
2)After you get root install flash tool To do Setup 4 . (Rasher or Flashify)
3)You must UNlocked you bootloader . (So the new rom can edit your boot process)
4)Install custom Recovery [CWM]or[PHILZ]or[TWRP]. (This make you can do zip install from external card)
5)Get your rom download and copy to your external card.
NOW YOUR READY
OK Now my guide is for LG G2 MINI (D618)
The custom rom is [ROM][5.1.1][D618/D620] Cyanogenmod 12.1 Stable
And my phone have OFFICIAL android 5.0.2 lollipop
1) ROOT : FOLLOW THIS GUIDE
http://forum.xda-developers.com/g2-mini/development/root-root-g2-mini-lollipop-t3123652
If it not success . do factory reset and start the root again but this time (don't setup superSU from store and don't restart your phone and IT's su Not Su) this should success .
2) DOWNLOAD THE FLASH TOOL FROM PLAY STORE AND KEEP IT
3) BOOTLOADER : FOLLOW THIS GUIDE (YOU MUST TAKE BACKUP FOR YOUR PHONE FIRST)
http://forum.xda-developers.com/g2-mini/development/bootloader-d620-d618-t3127819
4) CUSTOM RECOVERY : FOLLOW THIS GUIDE (CWM SUCCESS WITH ME) (JUST FLASH .IMG FILE WITH SETUP NUM (2))
http://forum.xda-developers.com/g2-mini/development/recovery-lg-g2-mini-d618-v10c-t2854493
5) DOWNLOAD THE FILE YOU NEED FROM HERE AND COPY TO EXTERNAL CARD AND FOLLOW Installation :
http://forum.xda-developers.com/g2-mini/development/rom-cyanogenmod-12-1-stable-t3175833
NOW IF THIS SETUP'S SUCCESS THE HARD PART IS OVER.
6) Now reboot into recovery mode (you will find this in Flash tool)
in recovery mode you need just two things (WIPE AND INSTALL)
7)CHOOSE "Wipe" CACHE, DATA and SYSTEM (THIS WILL DELETE YOUR PERSONAL DATA AND SETTING AND EVERY THING)
8)CHOOSE INSTALL ZIP FROM EXTERNAL CARD AND CHOOSE FIRST KK_BOOTSTACK_D618_1.1.ZIP THEN cm-12.1-20150828-UNOFFICIAL-g2m.ZIP
9) RECOMMENDED TO INSTALL GAPPS (tk_gapps-modular-pico(uni)-5.1.1-20150824-signed.ZIP)
10) NOW YOU HAVE DONE .. REBOOT YOUR PHONE AND IT WILL DO SOME INSTALL FOR ABOUT 10 MINUTE AND YOU WILL SEE SETTING SETUP ON THE SCREEN
11)F YOU HAVE unstable SIM signal JUST GO TO RECOVERY AND WIPE ONLY CACHE IT WILL BACK TO NORMAL.
THIS IS MY experience ON MY G2 D618 I DON'T KNOW ABOUT OTHER PHONE'S
THANK YOU XDA AND XDA-DEVELOPER'S FOR YOUR HARD WORK .
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
snoK123 said:
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
Click to expand...
Click to collapse
Make sure that Unlock bootloader process success i have this problem to and i Discovered that the unsuccess unlocking bootloader operation the Responsible for this error as i understand.
Flash custom recovery process deleting the original recovery but because of unsuccess unlocking bootloader Rasher Deleting original recovery but he cannot install the new custom recovery so what i do in this case .
1)Download official android lollipop from here (chose your country ) its KDZ File and flash with LG Flashtool 2014 Here
Now do the setup from the First setup .. and setup Num 2 i just mean Flash Custom Recovery File (Dont use TWRP Use CWM with Flashify .. Rasher didn't success with me ) Hope you make it
snoK123 said:
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
Click to expand...
Click to collapse
this is the stock android recovery that means that you didn't or couldn't flash a custom recovery
make sur you extracted the zip file and flashed the recovery.img with flashify
Hmmm, did everything exactly like you've written until flashing recovery. Now I'm stuck with attached screen when entering recovery...
Any idea?
Thank you!
snoK123 said:
Hmmm, did everything exactly like you've written until flashing recovery. Now I'm stuck with attached screen when entering recovery...
Any idea?
Thank you!
Click to expand...
Click to collapse
this is the fastboot screen
the recovery you tried to flash is corrupt make sur the file isn't corrupted and the that is matching your device
i think your device is d620r and your trying to flash the one from the thread [RECOVERY][CWM][PHILZ][TWRP] G2 Mini D618
if you can boot into system reflash the matching recovery TWRP for your device if you can't connect your phone to pc
use fastboot to flash the recovery
http://forum.xda-developers.com/g2-mini/development/recovery-twrp-2-8-3-0-recovery-lg-d620-t2990196
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
snoK123 said:
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
Click to expand...
Click to collapse
don't know what's wrong !! if bootloader was locked you will have a security error on boot not the fastboot screen when enterig to recovery maybe you're doing the wrong combination to access recovery try with an application or with flashify or rasher to reboot to recovery
snoK123 said:
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
Click to expand...
Click to collapse
give us screen shot of (about software) in your phone
I All, i lost two days trying to flash the recovery with rashr ....
With flashify everything was ok!!!
So please try with it
At least on my case the problem was just the app rashr that does not work on my phone
xander33 said:
I All, i lost two days trying to flash the recovery with rashr ....
With flashify everything was ok!!!
So please try with it
At least on my case the problem was just the app rashr that does not work on my phone
Click to expand...
Click to collapse
The same happen with me so I put the general tool for all users and I mentions the successful tools that work with me
Sent from my LG-D618 using XDA Free mobile app
INSTALL TWRP AND ROOT LENOVO P1M
Check this first.
a) Take backup of your important data at safe place.
b) Device must adequately charged.
c) Install USB drivers (MTK USB ALL + MTK VCOM DRIVER) to your PC. (For Windows) (Extract the driver zip and read the ReadMe.txt to install Usb Drivers)
Install TWRP
Follow the steps below.
Note : Use only TWRP 3 if your device is New Version or else your device will face some problem.
1) Download Sp Flash Tool and TWRP3 then Extract the Flash Tool & TWRP. – Then open " flash_tool.exe ".
2) Select " MT6735M_Android_scatter.txt ". It will locate in TWRP 3 folder.
3) Click Options on the top left side of the Flash Tool then check Download and make sure both of them are checked.
4) Select the " Download Only " to flash recovery.
5) Now just click on checkbox recovery and browse to the extracted files and locate " recovery.img ".
6) Turn off your Lenovo Vibe P1m
7) Click the big Download button on top right and connect the phone with usb cable in switch off condition.
8) Now you will see the red stripe showing download percentage.
9) Your phone is successfully installed TWRP now.
Steps to enter Recovery mode in Lenovo VIBE P1m :
1) Press and hold the Volume Down Button + Power Button.
2) When you see the Boot Screen, Release the Buttons.
3) Select Recovery mode using Volume Down.
4) Press Volume Up to Enter Recovery mode.
Note : When you flash recovery, do not switch on the device directly or else the recovery will replace by stock recovery.
Now TWRP recovery is installed on your Lenovo Vibe P1m.
Root Lenovo Vibe P1M
After installing TWRP on Lenovo Vibe P1M, follow the given steps to root it.
1) Download SuperSU from here.
2) Place the downloaded SuperSu zip in your external SD card.
3) Boot into Recovery Mode.
4) Click the Install menu on TWRP.
5) Browse the SuperSu zip you've downloaded and install it.
6) After SuperSu zip is successfully installed, Reboot your device.
7) Your Device is Rooted now.
Warning: I am not responsible if anything goes wrong, bricked device.
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Sorry for the late reply... i hope you've fixed it now..
Vlk Is My Name said:
Sorry for the late reply... i hope you've fixed it now..
Click to expand...
Click to collapse
Yes bro...i try another version of twrp & its work for me
subhyendu said:
Yes bro...i try another version of twrp & its work for me
Click to expand...
Click to collapse
Twrp 3.1.0 is now available...
Vlk Is My Name said:
Twrp 3.1.0 is now available...
Click to expand...
Click to collapse
How to update bro..
subhyendu said:
How to update bro..
Click to expand...
Click to collapse
Download the update and install through the previous twrp or flashify or sp flash tool or adb fastbooot, etc
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Same problem here!! ?? (Not fixed yet)?
Rocker223 said:
Same problem here!! ?? (Not fixed yet)?
Click to expand...
Click to collapse
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
subhyendu said:
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
Click to expand...
Click to collapse
By the way, I had already rooted it!! And now somehow I got it fixed!
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
SHUBHAM 13 said:
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
Click to expand...
Click to collapse
sorry for the late reply.. no need to unlock bootloader.. you can just flash TWRP via SP Flash tool.
I can't find the usb driver for windows 10.Can any one give the link?
how to update my twrp
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
hendra.dunk said:
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
Click to expand...
Click to collapse
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Vickyvignesh said:
I can't find the usb driver for windows 10.Can any one give the link?
Click to expand...
Click to collapse
yeahhh... me too... :crying: that's why I dual boot with win 7
Vlk Is My Name said:
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Click to expand...
Click to collapse
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
hendra.dunk said:
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
Click to expand...
Click to collapse
that may be due to the incompatible of updater script and twrp
Success!
Successfully booting into TWRP using this method. Thanks. My firmware is S040 (year 2017).
Dude, can you reupload the TWRP3 file from google drive? It got deleted. THANKS!