Hi all,
My z2 went into blackscreen after flashing v5 kernel on my .69 firmware. Pressing power button just made the phone vibrate in intervals. I tried pressing the red button near the sim tray but nothing happened. I also tried pressing the power+vol up button, nothing happen too. Is my phone dead?
Related
Hi,
I flashed a tft file with Flashtool. After the flashing progress had finished, I keep the phone plugged in for about 30 minutes.
When I came back, I unplugged the phone and tried to power it up.
I kept pressing the power button but nothing happened.
When I plug the USB cable in, the led turns red.
I have tried all button combination but hothing happened.
Could anyone please help me?
Hold vol up plus power button until the phone vibrates for three times
Then try to reflash again,check that you have the right file
aftergr said:
Hold vol up plus power button until the phone vibrates for three times
Then try to reflash again,check that you have the right file
Click to expand...
Click to collapse
I have tried, but there was no vibration
Please write here all actions you have performed. Have you installed CWM? Custom kernel? Which ftf file did you flash?
plus, make sure your phone is fully charged, the red led is usually and indicator for an empty one
And can you connect the phone in flash or fastboot modes?
Hello, I have a problem with my phone (Z5S Nubia Mini). When I want to turn on the phone, i have to push it for like 5s, then the phone starts (sometimes it vibrates for few times). But my problem is, that I CAN NOT get into recovery or bootloader, also i cant do factory reset via settings. When I select "recovery" (or restart or bootloader) in restart menu, the phone just turn off. When I hold VOL UP+POWER, the phone vibrates for few times, then the white screen with orange chinese text shows up, I still hold VOL UP+POWER, then it turns off again. When I tried to do factory reset via settings nothing happened, nothing was restored/uninstalled. Can you help me with this, please?
I tried to hold POWER+VOL UP+HOME and after the phone vibrates hold VOL UP+HOME only, but the phone stuck on white screen with chinese text (something like "wo")
I accidentally restore a backup (of my previous Z2 which was on my sd card through TWRP) on my Z2 on Exsistenz LP ROM yesterday. After that phone wont boot. Battery was .70% at the time of death. Red blinking led is seen when connected to usb cable. POWER + VOL UP doesn't give 3 vibes as intended, in fact nothing. Neither red hard reset button(Tried pressing it for >3mins). Cannot enter flash mode or fast boot modes .(tried to flash stock ROM through flash tool-failed). Only red blinking LED appears when usb cable connected.
Wierd to found when I press hard reset button while pressing POWER button it gives 3 vibes. But nothing changed.
Tried "pressing and holding all 3 buttons (power,vol+and vol-) all at the same time till it vibrates once then let go of the power button and vol+ but keep holding vol - while plugging in the usb cable this MiGHT boot your phone into flash mode" But didn't vibrate while holding all 3 buttons.
Its out of warranty period as well.
Please help me to recover to recover??? :crying:
use flashtool and flash stock ftf.
connect phone with usb cable when flashtool prompt to connect the phone
jhha said:
I accidentally restore a backup (of my previous Z2 which was on my sd card through TWRP) on my Z2 on Exsistenz LP ROM yesterday. After that phone wont boot. Battery was .70% at the time of death. Red blinking led is seen when connected to usb cable. POWER + VOL UP doesn't give 3 vibes as intended, in fact nothing. Neither red hard reset button(Tried pressing it for >3mins). Cannot enter flash mode or fast boot modes .(tried to flash stock ROM through flash tool-failed). Only red blinking LED appears when usb cable connected.
Wierd to found when I press hard reset button while pressing POWER button it gives 3 vibes. But nothing changed.
Tried "pressing and holding all 3 buttons (power,vol+and vol-) all at the same time till it vibrates once then let go of the power button and vol+ but keep holding vol - while plugging in the usb cable this MiGHT boot your phone into flash mode" But didn't vibrate while holding all 3 buttons.
Its out of warranty period as well.
Please help me to recover to recover??? :crying:
Click to expand...
Click to collapse
Something similar happened to me recently...wonder if this is a bug in a new release or something
This is what I did.
If you can't turn off phone, turn it off using the hard reset button http://sony-xperia.mobi/eng/sony-xperia-z2/231-how-to-do-a-hard-reset-and-reboot-a-sony-xperia-z2-physical-hard-reset-button-sony-xperia-z2.html
There's a really good guide on bricked z2 somewhere on xda but I can't find it anymore . What it said was useflashtools and flash and old ftf e.g. 4.4.4 or 4.4.2 and make sure to wipe apps_log and user_data in settings.
This might also help http://forum.xda-developers.com/showthread.php?t=1849170
Thanks for advice. The problem is it wont connect in flash mode. (attached usb with VOL DOWN button pressed & hold still gives only red blinking led)
jhha said:
Thanks for advice. The problem is it wont connect in flash mode. (attached usb with VOL DOWN button pressed & hold still gives only red blinking led)
Click to expand...
Click to collapse
Did you get it fixed?
jhha said:
Thanks for advice. The problem is it wont connect in flash mode. (attached usb with VOL DOWN button pressed & hold still gives only red blinking led)
Click to expand...
Click to collapse
If you restored another XZ2 with LOCKED BOOTLOADER's backup you probably killed your phone.
Was your bootloader unlocked?
Restoring anothers TA partition kills your device because drm keys are uniq
So I flashed ElitekenalV3 today after unlocking the bootloader and now my phone is stuck. It is only flashing red light while charging. I can't even see the sony logo anymore. which charging if I press the power button it vibrates and if I press and hold the power and volume down button the logo pops up only for a second? please help me. SOLVED!!
@iXaidyiu can you help him?
si1233 said:
So I flashed ElitekenalV3 today after unlocking the bootloader and now my phone is stuck. It is only flashing red light while charging. I can't even see the sony logo anymore. which charging if I press the power button it vibrates and if I press and hold the power and volume down button the logo pops up only for a second? please help me
Click to expand...
Click to collapse
1.Flash stock firmware with flashtools
2.If you can use fastboot flash kernel again use your PC
But the first method recommended
si1233 said:
So I flashed ElitekenalV3 today after unlocking the bootloader and now my phone is stuck. It is only flashing red light while charging. I can't even see the sony logo anymore. which charging if I press the power button it vibrates and if I press and hold the power and volume down button the logo pops up only for a second? please help me
Click to expand...
Click to collapse
Well first of all be sure that your phone is unlocked, after try to recover it with flashtool
Hello! I have a problem with the power button. The device can be turn on by the power button, but when the system loads the button stops responding. I flashed the Rom via Odin and the situation repeats both on the original rom and on the custom. Have you and idea?