Related
Can someone more experienced than me, please help me with this?.
I have an AT&T Atrix. I tried flashing some Latin America radios to it, like Retail Brazil and Personal Argentina ones (sorry, I can't remember the radio version number). They flash fine, and I get full signal and UMTS connectivity, but I don't have internet access. Phone shows 3G connectivity in the status bar, but it won't upload nor download data.
The reason I want to use these radios its because they were developed to be used in my area.
I can't understand why these radios kill my internet connection when other radios like the 01.97.00R works with no issues.
So, please, can anyone help me to understand why I don't have internet access with these radios?. Is there any trick I can do to fix this issue?.
I'm using the stock 4.1.8.3 radio (N_01.77.15P) now since it seems to be the most stable.
Thanks in advance.
Bump.
Please people!. Topics like "Why my Atrix is black?" gets more replies than my questions.
I'm really dissapointed. This is the fifth time I ask a question and noone gives a damn.
Now you see why people post questions in the development forum.
This is the rhythm of the bump!.
Btw, why is the Atrix black?
Dude, you had it coming. Lol!
mistadman said:
Btw, why is the Atrix black?
Dude, you had it coming. Lol!
Click to expand...
Click to collapse
Don't worry, it was a joke afterall.
Whipon, did you get your atrix fixed?
Whipon, Lograste arreglarlo?
Sorry to ask the obvious, but did you got your Access Point Names correct?
AT&T branded phones will have to manually get the AP configuration when used outside of AT&Ts network.
Let me know!
fernandodistinto said:
Whipon, did you get your atrix fixed?
Whipon, Lograste arreglarlo?
Click to expand...
Click to collapse
No, I don't know how to fix it. I'm using the stock 4.1.8.3 radio.
Rayan said:
Sorry to ask the obvious, but did you got your Access Point Names correct?
AT&T branded phones will have to manually get the AP configuration when used outside of AT&Ts network.
Let me know!
Click to expand...
Click to collapse
My APN settings are fine. I've switched radios through RSD Lite lots of times, and my APN settings remain there. There's no need to modify them.
I've manually configured my APN when I flashed 4..1.8.3, and its correctly set up for my carrier. Using 01.87.00R or 01.97.00R radios, my data plan works perfectly. But when I tried to flash some LA radios like Personal Argentina or Retail Brazil, while the 3G icon is showed in the status bar, I have no internet connection.
So I was hoping someone with more experience could help me make these radios work with an AT&T Atrix. Current stock radio works fine, but my signal strength suddenly drops very often, and sometimes I have no data and I have to reboot the phone.
I got the S3 (4.0.4, I9300BOLF1) rooted out here in Poland (bought in Poland to use in Poland) and I am on the orange network. I got the H+ showing but my download speeds are some 10kbps or slower. Wifi just works fine and I can open up web pages in the browser just fine on the H connection.
Any ideas what could be causing the very slow speeds?
jason8612 said:
I got the S3 (4.0.4, I9300BOLF1) rooted out here in Poland (bought in Poland to use in Poland) and I am on the orange network. I got the H+ showing but my download speeds are some 10kbps or slower. Wifi just works fine and I can open up web pages in the browser just fine on the H connection.
Any ideas what could be causing the very slow speeds?
Click to expand...
Click to collapse
Try a different modem from the modem thread .
jje
JJEgan said:
Try a different modem from the modem thread .
jje
Click to expand...
Click to collapse
Will try some different modems now..
jason8612 said:
Will try some different modems now..
Click to expand...
Click to collapse
Got it to work.
I also updated the firmware while I was at it. All works
jason8612 said:
Got it to work.
I also updated the firmware while I was at it. All works
Click to expand...
Click to collapse
How did you fix it? I have exactly the same problem - since yesterday I have the H+ icon, but the speed is improbably slow. I tried deleting APNs, flashing different radio and three different ROMs. What's more interesting, it happend out of nowhere - everything was working fine and suddenly I couldn't connect with Facebook or anything else. Speedtest show that something is actually working, because it pings the server.. Forever. And then it does the test and stops it due to internect connection failure.
Any ideas?
Flash the LF3 modem. It helps alot with singal, speeds and battery
Sent from my GT-I9300 using xda premium
But isn't LF3 for Far East countries? I will give it a try, but the weird thing is everything was working perfectly okay and now it just isn't. I checked if something's happend to my IMEI, but it is intact. Also I checked my SIM card using other phone and it works just fine. Damn, I hate when the universe in biting my arse for no apparent reason. :/
UPDATE:
Changing the radio again made absolutely no difference..
roshi87 said:
But isn't LF3 for Far East countries? I will give it a try, but the weird thing is everything was working perfectly okay and now it just isn't. I checked if something's happend to my IMEI, but it is intact. Also I checked my SIM card using other phone and it works just fine. Damn, I hate when the universe in biting my arse for no apparent reason. :/
UPDATE:
Changing the radio again made absolutely no difference..
Click to expand...
Click to collapse
Did you figure out how to fix it in the end ? I have the exact same problem, good signal yet very slow internet speeds also have bad call quality.
louie875 said:
Did you figure out how to fix it in the end ? I have the exact same problem, good signal yet very slow internet speeds also have bad call quality.
Click to expand...
Click to collapse
I have the same problem here with my S3, did anyone solve it yet ?
---------- Post added at 03:31 PM ---------- Previous post was at 02:57 PM ----------
jason8612 said:
Got it to work.
I also updated the firmware while I was at it. All works
Click to expand...
Click to collapse
Sorry,I have the same problem, but how do I do that modem changing from the modem thread ?
habozekry said:
I have the same problem here with my S3, did anyone solve it yet ?
---------- Post added at 03:31 PM ---------- Previous post was at 02:57 PM ----------
Sorry,I have the same problem, but how do I do that modem changing from the modem thread ?
Click to expand...
Click to collapse
Turned out it was a fault with my Network, the towns exchange was down or something so everything was being routed through another towns exchange. The call quality and Internet speed was slow because there ended up being too much traffic going through one exchange
Hello All,
I recently installed a Rom from the international htc one forums and I am encountering the problem where my data is constantly switching between G, 2G, and 4G. I tried installing the t-mobile radio but it still does not fix this issue. Any help to fix this problem would be appreciated, thanks!.
jons227 said:
Hello All,
I recently installed a Rom from the international htc one forums and I am encountering the problem where my data is constantly switching between G, 2G, and 4G. I tried installing the t-mobile radio but it still does not fix this issue. Any help to fix this problem would be appreciated, thanks!.
Click to expand...
Click to collapse
Where did you buy your phone? From HTC directly or at a T-Mo/T-Mo affiliate? When flashing a ROM, make sure it's compatible with the T-Mobile HTC One. I would try flashing one with confirmed support. If you have an M7 directly from HTC, you will NOT be able to receive HSPA+ 42mbs through the 1700 (AWS) band. However, you can still get HSPA+ 21mbs through the 1900 band if you are in a refarmed area.
Jinra321 said:
Where did you buy your phone? From HTC directly or at a T-Mo/T-Mo affiliate? When flashing a ROM, make sure it's compatible with the T-Mobile HTC One. I would try flashing one with confirmed support. If you have an M7 directly from HTC, you will NOT be able to receive HSPA+ 42mbs through the 1700 (AWS) band. However, you can still get HSPA+ 21mbs through the 1900 band if you are in a refarmed area.
Click to expand...
Click to collapse
My Phone is from T mobile. I live in a re-framed area but it seems the radio for the M7 from HTC was put on my phone or that's what I am guessing.
jons227 said:
My Phone is from T mobile. I live in a re-framed area but it seems the radio for the M7 from HTC was put on my phone or that's what I am guessing.
Click to expand...
Click to collapse
Your phone would be able to receive the signal as long as it supports the band. Perhaps you just have spotty coverage? Try flashing another RAM or stock to see if it switches on you.
Jinra321 said:
Your phone would be able to receive the signal as long as it supports the band. Perhaps you just have spotty coverage? Try flashing another RAM or stock to see if it switches on you.
Click to expand...
Click to collapse
I tried flashing a bunch of different roms and stock ones too. None of them worked to fix the problem. My reception isn't the problem as before I installed Android Revolution I had constant 4g everywhere I went with at least 4-5 bars. I also flashed the t mobile radio found on these forums too but that didn't work either.
jons227 said:
I tried flashing a bunch of different roms and stock ones too. None of them worked to fix the problem. My reception isn't the problem as before I installed Android Revolution I had constant 4g everywhere I went with at least 4-5 bars. I also flashed the t mobile radio found on these forums too but that didn't work either.
Click to expand...
Click to collapse
I'm confused, are you saying you tried a bunch of ROMs and none of them worked well besides ARHD?
Jinra321 said:
I'm confused, are you saying you tried a bunch of ROMs and none of them worked well besides ARHD?
Click to expand...
Click to collapse
I flashed other roms to see if it was just ARHD that was affected by the data problem. Anything I flashed after ARHD would have the same problems
jons227 said:
I flashed other roms to see if it was just ARHD that was affected by the data problem. Anything I flashed after ARHD would have the same problems
Click to expand...
Click to collapse
did you get this solved? i am having a similar issue. when i first turn on my phone, i can get 4g/hspa. but it drops after a couple of mins. i dont even get edge. works everytime i reboot the phone or go from airplane mode on to off. i noticed the problem after rooting my tmobile htc one and flashing a ROM.
Is it better just to stick with approved ROM for Tmo? There are not many to go around.
I learn if it is 4g, 3g, wifi, etc it is kernel and just find a Tmo kernel.
Cook ROM and Kernel are different.
I am still learning.
So around 3 weeks ago I got a brand new unlocked Z2 D6503. As it says, it supports LTE and the bands it support are available and broadcasted here in KSA.
I'm on the operator Zain KSA and when I manually search for mobile networks, I do see the LTE network by the operator but whenever I select it, it doesn't register on it.
I've tried everything from calling/visiting the network operator from changing the SIM and getting a new one.
The FW I have is .314
Anyone has any experience or any idea? Do I need to reflash the FW?
May be enter the correct APN settings for your carrier?
Sent from my One using Tapatalk
Firstly, are you on an LTE plan? For Singapore, we need to sign up to an LTE plan and the operator has to do the necessary activation, before we can register on the LTE network.
hush66 said:
Firstly, are you on an LTE plan? For Singapore, we need to sign up to an LTE plan and the operator has to do the necessary activation, before we can register on the LTE network.
Click to expand...
Click to collapse
That's the thing, I already had 4G activated, and I specially got it deactivated and activated again on this handset. 4G coverage is in my area, each and everything is in optimal condition. The network operator says everything is also fine at their end...
kirdroid said:
May be enter the correct APN settings for your carrier?
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Yup everything is configured correctly
I can confirm that it is the handset that is not registering LTE.
I just popped in a working LTE SIM which has full coverage in my area and Z2 fails to register it...
Well I can't say much about LTE since I am on 3G data plan so can't use it. But the funny thing happened that I was on Edge connection, even tho I was in city centre and I could use 3G, it was full. So went into phone options and changed into 3G only and then Z2 has magically seen the better connection. Try to do that for LTE, maybe it will work. Otherwise I would flash other firmware or repair with PCC.
HugePotato said:
Well I can't say much about LTE since I am on 3G data plan so can't use it. But the funny thing happened that I was on Edge connection, even tho I was in city centre and I could use 3G, it was full. So went into phone options and changed into 3G only and then Z2 has magically seen the better connection. Try to do that for LTE, maybe it will work. Otherwise I would flash other firmware or repair with PCC.
Click to expand...
Click to collapse
Okay so actually solved the issue.
I reinstalled/repaired the FW using Sony PC Companion and now LTE works perfectly. But the side effect? I heard that 4.4.2 causes many bugs and seems like I just got the phone sluggish one.
Phone feels sluggish in different parts as well as when I tap the recent icons button. Also the animation for WiFi turning on and off is not there anymore...
I don't know what's happening anymore....:/
I too have a bit of a lag when I hit recents menu button. I guess it's just the way Z2 is now and we have to wait for new firmwares, hopefully with less bugs, to come.
Happy for you that you fixed the problem with LTE
HugePotato said:
I too have a bit of a lag when I hit recents menu button. I guess it's just the way Z2 is now and we have to wait for new firmwares, hopefully with less bugs, to come.
Happy for you that you fixed the problem with LTE
Click to expand...
Click to collapse
Yeah, seems like we'll just have to wait for 4.4.4 to hit...
Sad how the animations worked and there was no lag but sadly no LTE functionality. Such bad FW release.
And yeah atleast I fixed the LTE issue as I really can't stand slow internet and H+ seems pretty slow to me.
Same problem...install the new software through PC companion still the problem
MajorAly said:
Okay so actually solved the issue.
I reinstalled/repaired the FW using Sony PC Companion and now LTE works perfectly. But the side effect? I heard that 4.4.2 causes many bugs and seems like I just got the phone sluggish one.
Phone feels sluggish in different parts as well as when I tap the recent icons button. Also the animation for WiFi turning on and off is not there anymore...
I don't know what's happening anymore....:/
Click to expand...
Click to collapse
Dear Majorlay sir
i need your help, i am trying to connect to my lte network, it dont register
i am having new 4g activated Mobily sim in khobar (KSA)
kindly help and send me your number i will call you back
please help me
0542353734
[email protected]
Turned my phone on this morning to a new update. Still 6.0.1 with a build number of PJ4. Not sure what it "fixes" yet but noticed a new bloat app called Fullscreen.
I received this update as well. Just to be clear, this is bootloader 4, correct? I'm not sure how to verify. I am about to flash you're U version you posted, and hopefully get wifi calling and texting working on it. You said you flashed back to at&t version, may I ask why ?
Yes, everything's 4 now.
I flashed back to stock att too get wifi calling and volte back that wasn't available on the U
joe3681 said:
Yes, everything's 4 now.
I flashed back to stock att too get wifi calling and volte back that wasn't available on the U
Click to expand...
Click to collapse
I am about to do that as well
I like the U firmware, but that damn WIFI calling is too important for me ( My house and work have no cell service). Damn AT&T and not having a streamlined WIFI calling system. Do you use the samsung disabler app at all? i use it to pretty much remove everything.
Even though for me wifi calling seems to not work as well after the update.
I do the same with PDP, I disable all I can!
Here what's new
Opps, I rooted the other day and then this update hit, thought I could ignore it but it applied it anyways. I tried to flash the "unroot" files, API2 seems the latest available, but I can not flash those. Do I just have to wait for Pj4 files to be available to flash?
My WiFi calling seems to be working fine. I usually turn on airplane mode though then WiFi. Forces WiFi calling
uscg.matthew said:
My WiFi calling seems to be working fine. I usually turn on airplane mode though then WiFi. Forces WiFi calling
Click to expand...
Click to collapse
At my work it used to kick on wifi calling as soon as I got there. Now it rarely does. I haven't ever needed to try the airplane mode trick but Ill give it a go.
I do it because I have the slightest hint of service. I forgot where I read it, but WiFi calling is for when there is zero service . The airplane mode works pretty great. Hope it helps!
uscg.matthew said:
I do it because I have the slightest hint of service. I forgot where I read it, but WiFi calling is for when there is zero service . The airplane mode works pretty great. Hope it helps!
Click to expand...
Click to collapse
It wasn't until this most recent update AND a cache wipe/factory reset that Wi-Fi activation finally went through. I have it enabled and it over rides my cell service regardless of signal strength and airplane mode state. It's been clear as a bell for me, however, I've only tried it over my home network. I'd imagine it wouldn't work too well over an open public or overloaded network but I could be wrong
Sent from my SAMSUNG-SM-G930A using Tapatalk
Just went thru an update: PK1 is the latest on my phone
roger25186 said:
Just went thru an update: PK1 is the latest on my phone
Click to expand...
Click to collapse
Same here. 49.77mb update with November 1st security update.
Sent from my SAMSUNG-SM-G930A using XDA-Developers mobile app
That was quick! I'm on U FW now so no update for me
Hi! Anybody knows how AT&T does this?
I just got this update (PJ4) last night (12/7/16)
I just got it today (12/15)... wonder when I'll get PK1 ?
Sent from my SAMSUNG-SM-G935A using XDA-Developers mobile app
Also got PK1. was just some security fixes nothing special.