[Q] Stuck on CWM 5 (PhilZ Touch 5) - Galaxy S III Q&A, Help & Troubleshooting

Hi!
Before I Install anything I did:
- Wipe Data/Factory Reset
- Wipe Cache Partition
- Wipe Davlik Cache
Then I tried to install:
Code:
- I9300 AOSP NeatROM v5.8 (4.4.3) - Failed with (Status 7)
so I tried Installing:
- I9100 AOSP NeatROM v4.9 (4.4.2) - Failed with (Status 7) too!
And finally tried installing:
- I9300XXUGND5_NeatROM_v7.6_Aroma[/URL] - Failed with (Status 7)
then I tried modifying the update-script for each of them and tried to install hoping one of them works, but:
Code:
- I9300 AOSP NeatROM v5.8 (4.4.3).zip - Disappeared in CWM
- I9100 AOSP NeatROM v4.9 (4.4.2).zip - Disappeared in CWM
- I9300XXUGND5_NeatROM_v7.6_Aroma - (Bad) installation aborted
Now I dont care about any ROM, I just want my device back!
Thanks!

Update recovery, status 7 issues are normally due to incompatible recoveries try latest twrp or cwm , from website ie not via clockwork manager. To get device back now just reflash your nandroid backup, should work fine even with older recovery.
Sent from my GT-I9300

ghostofcain said:
Update recovery, status 7 issues are normally due to incompatible recoveries try latest twrp or cwm , from website ie not via clockwork manager. To get device back now just reflash your nandroid backup, should work fine even with older recovery.
Sent from my GT-I9300
Click to expand...
Click to collapse
I tried getting twrp but its not installing through odin!!
and where can I get the updated cwm, please?
I guess mine is 6
and theres no v7 at clockworkmod(dot)com/rommanager
I've added a snapshot of my phone in the attachment, if that helps!!

Sphinx_GH said:
I tried getting twrp but its not installing through odin!!
and where can I get the updated cwm, please?
I guess mine is 6
and theres no v7 at clockworkmod(dot)com/rommanager
I've added a snapshot of my phone in the attachment, if that helps!!
Click to expand...
Click to collapse
This is latest PhilZ recovery download page >> http://www.mediafire.com/?6bz59b4kwq6my << Also noticed in your post you tried to flash "I9100 AOSP NeatROM v4.9 (4.4.2)" wrong phone my friend probably good that that one failed to install!
If your phone still does not flash with new recovery then return to stock with Odin and start again

No! I'm sure I didn't try to install i9100, I carefully chose I3900 in every ROM I've downloaded! I've just copied this text carelessly so...
However, the recovery I've installed named:
Code:
philz_touch_5.18.4-i9300.tar.md5
What you gave me is:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Are you sure it's newer than mine?
Cuz I'm running outta battery and I just can't keep trying until my phone is dead!!
Thanks!!

Sphinx_GH said:
No! I'm sure I didn't try to install i9100, I carefully chose I3900 in every ROM I've downloaded! I've just copied this text carelessly so...
However, the recovery I've installed named:
Code:
philz_touch_5.18.4-i9300.tar.md5
What you gave me is:
Are you sure it's newer than mine?
Cuz I'm running outta battery and I just can't keep trying until my phone is dead!!
Thanks!!
Click to expand...
Click to collapse
Don't keep trying as suggested return to stock with odin if the recovery does not work.

I tried installing I9300XXUGMK6_I9300OXAGMK6_OXA with odin few times - That's the rom I used to use before I f up my phone
but it's not working!
Log be like: (Succeed 0/0 Failed) or something like that!!

Sphinx_GH said:
I tried installing I9300XXUGMK6_I9300OXAGMK6_OXA with odin few times - That's the rom I used to use before I f up my phone
but it's not working!
Log be like: (Succeed 0/0 Failed) or something like that!!
Click to expand...
Click to collapse
Can you post a screen shot of what fails in Odin?
Sent from my GT-I9300 using Tapatalk

tallman43 said:
Can you post a screen shot of what fails in Odin?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I think it's just worked for this time! Thanks alot!
JB 4.2.2
Wanted that Kit Kat thing so badly but... whatever!!

Sphinx_GH said:
I think it's just worked for this time! Thanks alot!
JB 4.2.2
Wanted that Kit Kat thing so badly but... whatever!!
Click to expand...
Click to collapse
Glad it worked ? Give it another try in a week or two when you have the courage to try again you now know you can always go back to stock Rom ....Maybe also try installing Twrp again using a different version of Odin.
Sent from my GT-I9300 using Tapatalk

tallman43 said:
Glad it worked ? Give it another try in a week or two when you have the courage to try again you now know you can always go back to stock Rom ....Maybe also try installing Twrp again using a different version of Odin.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Yeah bro thanks! it seems that ive installed an official JB 4.2.3 (not 4.2.2 as i thought)
and I got it registered on samsung server hopefully waiting to an official update
cuz the previous process made me lose all of my data you know

You'll be waiting a long time, Samsung have stated i9300 will not be updated to 4.3
Sent from my GT-I9300

ghostofcain said:
You'll be waiting a long time, Samsung have stated i9300 will not be updated to 4.3
Sent from my GT-I9300
Click to expand...
Click to collapse
You mean 4.4

tallman43 said:
You mean 4.4
Click to expand...
Click to collapse
[emoji106]
Sent from my GT-I9300

Related

[Q] Blue Error Handler & very strange system crashes @ Cyanogenmod 7.0.2

Yesterday I flashed the Cyanogenmod 7 Rom on my girlfriends P500.
Actually, everything seemed to work fine, but after some time device crashes and following error screen appears:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After a reboot everything is fine again, but after some time, the error appears another time. Happend 3 times now
I have never seen this screen on any device, so I don't know what to do
Does anyone have an idea?
Information:
Optimus One P500
[stable build: beta6.3] CyanogenMod 7.0.2 by mik_os
latest darktremors app2sd
Che123 said:
Yesterday I flashed the Cyanogenmod 7 Rom on my girlfriends P500.
Actually, everything seemed to work fine, but after some time device crashes and following error screen appears:
After a reboot everything is fine again, but after some time, the error appears another time. Happend 3 times now
I have never seen this screen on any device, so I don't know what to do
Does anyone have an idea?
Information:
Optimus One P500
[stable build: beta6.3] CyanogenMod 7.0.2 by mik_os
latest darktremors app2sd
Click to expand...
Click to collapse
this might help u http://code.google.com/p/openetna/issues/detail?id=292
go for a clean install use the zip provided by mik for bootloop it will erase the system properly or use adb instead to wipe then procede with the installation of cm 7 latest built 2.4.2
shhbz said:
this might help u http://code.google.com/p/openetna/issues/detail?id=292
go for a clean install use the zip provided by mik for bootloop it will erase the system properly or use adb instead to wipe then procede with the installation of cm 7 latest built 2.4.2
Click to expand...
Click to collapse
Thanks for that link. I am going to have a look at this.
Actually I don't think, that it's the bug with the /system wipe which is causing this problem, since everything else works fine.
But if I am going to reflash everything, I gonna give that a try
The device is fresh rooted - do I need a custom radio or other prerequisites, to run this rom?
Che123 said:
Thanks for that link. I am going to have a look at this.
Actually I don't think, that it's the bug with the /system wipe which is causing this problem, since everything else works fine.
But if I am going to reflash everything, I gonna give that a try
The device is fresh rooted - do I need a custom radio or other prerequisites, to run this rom?
Click to expand...
Click to collapse
which recovery are you using and u dont need any radio etc
shhbz said:
which recovery are you using and u dont need any radio etc
Click to expand...
Click to collapse
ok, nice
I flashed this recovery: recovery-RA-GNM-thunderg - i think it's version 1.1.0
I don't have the phone here now, so I cant say it for sure
Che123 said:
ok, nice
I flashed this recovery: recovery-RA-GNM-thunderg - i think it's version 1.1.0
I don't have the phone here now, so I cant say it for sure
Click to expand...
Click to collapse
why dont u try the latest one http://androidforums.com/getitnowmarketing/330813-all-one-recovery-thread.html
here it is orelse go for clockwork its great i like it better than thunderg but it doesnt support flashing all roms at this point but cm7 works with it any many others 2 but cant name them all and avoid using a2sd if u dont have a class 4 sd card atleast as it works great without a2sd some users find difficulties even after using a good sd card
shhbz said:
why dont u try the latest one http://androidforums.com/getitnowmarketing/330813-all-one-recovery-thread.html
here it is
Click to expand...
Click to collapse
ah damn
i didn't see that one. I don't really know much about this device, since I own another one - so thanks for your help
This evenning, I gonna flash the new recovery, and reflash everything again. I will report back
Thanks again for your help
edit: I have the same problem with clockwork recovery on my desire - I had to switch back to an older version. So I am not really satisfied with this recovery atm
Che123 said:
ah damn
i didn't see that one. I don't really know much about this device, since I own another one - so thanks for your help
This evenning, I gonna flash the new recovery, and reflash everything again. I will report back
Thanks again for your help
edit: I have the same problem with clockwork recovery on my desire - I had to switch back to an older version. So I am not really satisfied with this recovery atm
Click to expand...
Click to collapse
i will make it easier for u flash this http://forum.xda-developers.com/showthread.php?t=1065197
or clockwork http://forum.xda-developers.com/showthread.php?t=1024838
both are working so need to go through the process again just flash remember if u choose to flash the first 1 just select toggle signature option before flashing the file
Are you overclocking it? If yes then try to lower you max frequency.
shhbz said:
i will make it easier for u flash this http://forum.xda-developers.com/showthread.php?t=1065197
or clockwork http://forum.xda-developers.com/showthread.php?t=1024838
both are working so need to go through the process again just flash remember if u choose to flash the first 1 just select toggle signature option before flashing the file
Click to expand...
Click to collapse
I am not new to android - i am only new to the p500
but thanks for that links - makes it a bit more comfortable
I think I gonna give that first one a try.
verification is already deactivated
ungaze said:
Are you overclocking it? If yes then try to lower you max frequency.
Click to expand...
Click to collapse
Nope. No overclocking - everything stock so far.
Che123 said:
I am not new to android - i am only new to the p500
but thanks for that links - makes it a bit more comfortable
I think I gonna give that first one a try.
verification is already deactivated
Click to expand...
Click to collapse
same here old to hd 2 ,new for p500
shhbz said:
same here old to hd 2 ,new for p500
Click to expand...
Click to collapse
since it's not my own phone, I am not so enthusiastic anyway
Let's just hope, everything works fine this evening
Bad news
Just spent the last couple of hours installing everything once again:
- updated to latest recovery
- wiped everything (even wiped /system manually via adb)
- flashed cm7
- flashed gapps
- reboot
- flashed latest darktremor apps2sd
- restore apps and setup rom
everything worked fine again, but after playing around with it, the keys started to flash again, screen freezes and system crashes (for now without the black screen from first post) - I'm not able to obtain the systemlog, so I can't even get a direction.
Any further suggestions please?
Edit:
In the logcat i get this line every 3 seconds:
D - 1776 - WifiService - ACTION_BATTERY_CHANGED pluggedType:2
Even if there is nothing plugged in - but only when wifi is turned on.
But the device also crashes, if wifi is not activated
I got exactly the same error screen from the first page this morning again
Another thing I noticed: The battery behaviour is very strange. I had 100% - crashed after 10 min -> 19% after reboot - but counting slowly up again. Now I am @ 46%.
edit2:
After removing app2sd and fix connection issues for gapps, everything went fine for a while. But once again: error screen appears >.<
I am going to flash .void now - and hope the issues were rom-based and not an error in the device

SOS: Help a Noob stuck at Samsung screen upon attempt to root

Hello,
Could you pls help a noob with a rooting problem? I attempted to root my ICS AT&T Galaxy Note i-717 using Odin3 v 1.85 and a pda.tar file. Prior to that, I had checked and confirmed the USB drivers are installed (I have Kies software installed on the PC. However, folliwing the succesful flash of pda.tar I got the phone stuck at the Samsung screen. I could still get to the download screen. However, the phone would not go pass that screen. Can you pls tell me what I did wrong/guide me w simple steps on how to fix the phone and finish the root? I have the read many different root treads but I find them confusing. Treads are ponting at different files to be frashed/installed on the phone. Thanks very much.
This happens from time to time...don't worry.
Reboot phone in download mode, connect phone, reflash kernel.
A few things: use stock samsung cable. Use back of computer usb port. Reboot computer before you try again. Re download the kernel to be sure your file is not corrupted. Make sure phone battery is more than 80%.
re:
rangercaptain said:
This happens from time to time...don't worry.
Reboot phone in download mode, connect phone, reflash kernel.
A few things: use stock samsung cable. Use back of computer usb port. Reboot computer before you try again. Re download the kernel to be sure your file is not corrupted. Make sure phone battery is more than 80%.
Click to expand...
Click to collapse
Rangercaptain,
Thanks very much. Where can I get the kernel from and which one/which file do I need to flash? Also, how do I flash it? Do I use Odin or another method? Again Thanks a lot!
ptanev said:
Rangercaptain,
Thanks very much. Where can I get the kernel from and which one/which file do I need to flash? Also, how do I flash it? Do I use Odin or another method? Again Thanks a lot!
Click to expand...
Click to collapse
Follow the part one instructions in the first post. Read twice click once. Take your time.
http://forum.xda-developers.com/showthread.php?p=24539068
Make sire lies is closed
Sent from my SAMSUNG-SGH-I717 using xda premium
Nolenm04 said:
Make sire lies is closed
Click to expand...
Click to collapse
Make sure Kies is closed
Yes, good suggestion. I would reboot the computer, put the phone in download, open Odin3, then plug in phone.
All that is well explained in the thread.
Problem solved
rangercaptain said:
Make sure Kies is closed
Yes, good suggestion. I would reboot the computer, put the phone in download, open Odin3, then plug in phone.
All that is well explained in the thread.
Click to expand...
Click to collapse
All,
Thanks very much for your help! I fugured it out and am now up and running!
I ended up flashing rooted Stock ICS ROM from FJ!
Thanks very much to all of you and FJ!
rangercaptain said:
Make sure Kies is closed
Yes, good suggestion. I would reboot the computer, put the phone in download, open Odin3, then plug in phone.
All that is well explained in the thread.
Click to expand...
Click to collapse
Oh snap lol just noticed I misspelled half of that oops
Sent from my SGH-I717 using xda premium
Nolenm04 said:
Oh snap lol just noticed I misspelled half of that oops
Sent from my SGH-I717 using xda premium
Click to expand...
Click to collapse
I liked it....:laugh:.....:good:
I thought it was drunk-xda-ing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rangercaptain said:
I thought it was drunk-xda-ing.
Click to expand...
Click to collapse
:laugh:
rangercaptain said:
I thought it was drunk-xda-ing.
Click to expand...
Click to collapse
Lol
View attachment 1291558
Sent from A Closet @ Arkham Asylum on my GNote using Forum Runner, Black ★.
Stuck at Samsung
I have the same issue tho have tried troubleshooting and could really use some extra help.
Updated to ATT stock ICS update a few months ago. Everything workin fine.
Wanted to root it so I could back everything up not to lose anything when moving to JB.
Rooted by flashing Da_G's pda.tar, reboot, and then flashed 2.3.3.0 TWRP
Noticed it was stuck at Samsung.
Here's where I'm kickin myself because I should have backed it up before all this, but I waited because I figured root doesn't wipe data!
Entered TWRP, backed up.
Now what I've tried to fix it... and failed
1. Reflashed pda.tar about 5 times
2. Found a stock pda "pda-odin-att-stock.tar", flashed (fixed) but it's stock setup and contacts and other google services don't work, lost homescreen icon placement and all other settings.
3. TWRP: Restore all = stuck at Samsung again
4. Repeat 2 and Restore only System
5. Repeat 2 and Restore only Data
6. Repeat 2 and flash pda.tar = boots, but same thing with it all stock, so I restore and it's stuck again.
It's my wife's phone and she has contacts that aren't saved in Google, to-do lists saved in app data files, and to be honest, she said everything better be exactly the same after updating (which I promised it would be since the plan was to root, backup, update, and restore), so I'm kinda trying to save my hide. PLEASE HELP me save my ass ha!
Other things to note: I just rooted a new phone about 30mins prior with the exact same root and TWRP files and it went very smooth, no issues.
Using a Samsung original cable on a laptop. Phone Battery was ~30% when I did all the steps, but since then read that battery should be higher so swapped out to fully charged battery and retried the steps.
Using the root kernel you did, basically flashed a Gingerbread kernel over an ICS rom. (Doesn't work)
Your best bet at this point, is too flash a rooted ICS build from bigfau ...(located in the super thread stock section)
Just flash using TWRP ....BUT !!!
make sure you wipe the dalvik cache, system cache, and system before flashing the rooted ICS build.
Once the rom is flashed, you will be stock and rooted.
Regarding data you have lost with no backup....start begging forgiveness now ....it's gone ....g
gregsarg said:
Using the root kernel you did, basically flashed a Gingerbread kernel over an ICS rom. (Doesn't work)
Your best bet at this point, is too flash a rooted ICS build from bigfau ...(located in the super thread stock section)
Just flash using TWRP ....BUT !!!
make sure you wipe the dalvik cache, system cache, and system before flashing the rooted ICS build.
Once the rom is flashed, you will be stock and rooted.
Regarding data you have lost with no backup....start begging forgiveness now ....it's gone ....g
Click to expand...
Click to collapse
Wouldn't I be able to just flash an ICS Kernel to undo the GB kernel and set things straight? Or is the whole thing ruined already?
I have the data/app and data/data files. If all's really lost, I'll just put JB on it. If I copy the data/app and data/data files onto the new image will all the apps with their settings/data be restored at least?
Yes, flash the correct kernel.
I think what happened to me is the OS got deleted cuz once I flashed a rom I was good to go!

[Q] I have absolutely no signal

So, last night I decided to update to one of the CM 10.1 nightlies. I haven't updated in a while and thought why the heck not? So I used the option built in the Settings app to update. I pressed download and waited for it to finish, then hit install and went to sleep while it installed. When I woke up I had no signal. Not even 2g. No calls, texts, data, you name it. Gone.
So I have spent at least 6 hours re installing old versions and scouring the internet and no one has an issue exactly like mine.
Here's a screenshot of what the settings look like:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This might be an obvious question but have you tried reflashing one of the available modems?
JBeXX said:
This might be an obvious question but have you tried reflashing one of the available modems?
Click to expand...
Click to collapse
Thanks for the quick reply. No I haven't tried that yet actually. I can't find anything on google. Could you point me in the direction to flashing a modem?
Lepryy said:
Thanks for the quick reply. No I haven't tried that yet actually. I can't find anything on google. Could you point me in the direction to flashing a modem?
Click to expand...
Click to collapse
Just flash in recovery. Probably best to use the newer which is the VRALL4. If this doesn't fix it you may want to try a clean flash with a full wipe.
http://forum.xda-developers.com/showthread.php?t=2108510
JBeXX said:
Just flash in recovery. Probably best to use the newer which is the VRALL4. If this doesn't fix it you may want to try a clean flash with a full wipe.
http://forum.xda-developers.com/showthread.php?t=2108510
Click to expand...
Click to collapse
Wait why would I use the VRALL4 and not the VRALLJB?
Lepryy said:
Wait why would I use the VRALL4 and not the VRALLJB?
Click to expand...
Click to collapse
It's the newer of the 2. It was part of the first vzw ota after release.
JBeXX said:
It's the newer of the 2. It was part of the first vzw ota after release.
Click to expand...
Click to collapse
Alright, here goes nothing. I'll post back the results.
JBeXX said:
It's the newer of the 2. It was part of the first vzw ota after release.
Click to expand...
Click to collapse
Umm. So it seems this update did a lot more than mess up my data. It completely wiped my Recovery and removed my Play Store completely. I have no way to even flash this modem.
Lepryy said:
Umm. So it seems this update did a lot more than mess up my data. It completely wiped my Recovery and removed my Play Store completely. I have no way to even flash this modem.
Click to expand...
Click to collapse
Very odd. What recovery were you using? I'm not on cm 10.1 so I'm not familiar with the updater but did it give you options to wipe any data or caches? And did you reflash gapps after updating?
If you can get a wifi connection you could always try and flash TWRP through the goo manager app. Just a thought.
JBeXX said:
Very odd. What recovery were you using? I'm not on cm 10.1 so I'm not familiar with the updater but did it give you options to wipe any data or caches? And did you reflash gapps after updating?
If you can get a wifi connection you could always try and flash TWRP through the goo manager app. Just a thought.
Click to expand...
Click to collapse
I get an error when using the goo manager app. It says no current recovery installed. I am seriously ****ing stuck. Just one harmless update has demolished all the stuff on my phone.
Lepryy said:
I get an error when using the goo manager app. It says no current recovery installed. I am seriously ****ing stuck. Just one harmless update has demolished all the stuff on my phone.
Click to expand...
Click to collapse
You should be able to install recovery from the goo app. Open the all, then hit menu, then install openrecoveryscript. Confirm and see if will flash it.
Had this problem many of times on a gs3.
Calm down, I may be able to help you.
In the settings picture you posted. The my phone number was out of sight.
If the spot said Unknown.
You may be in luck.
But anyways do this either way.
Make sure you back up any thing you don't want to lose.
Boot into download mode.
Flash a stock unrooted official version. I believe this will also flash the modems and radio as well.
Check your signal and phone settings now.
I would expect nothing has changed signal wise.
But if you still have problems you open up dialer and call this phone number
*2767*3855#
Now your phone will cook up some magic and everything will be like the day you opened the box
However if this does not work, I would consider a new sim card (free at Verizon), try and do some more research
Or accept the fact you may have a hardware problem.
Feel free to pm me to let me know how it goes.
God bless the American people.

How to install CWM without USB

Hi Fellas.
I've got recently Galaxy s2.
It has old OS (2.3.5)
I would like to install CianogenMod10.2 or something similar.
The problem with this phone - It has completely broken usb socket. I charge the battery exernally.
I cannot use built-in bootloader, which works with Odin - because , again, usb is not working.
It also has some other bootloader (Powerup +Select button +volume UP) - which looks like CWM - but it's not CWM - because phone has stock firmware from Orange mobile company. This loader has even option to install zip from SD card - But when I try to install cm-10.2-20130824-NIGHTLY-i9100.zip ( latest cianogenmod) - it gives an error - that image is NOT SIGNED.
Is there anything I can do ?
Please advice
junglemike said:
Hi Fellas.
I've got recently Galaxy s2.
It has old OS (2.3.5)
I would like to install CianogenMod10.2 or something similar.
The problem with this phone - It has completely broken usb socket. I charge the battery exernally.
I cannot use built-in bootloader, which works with Odin - because , again, usb is not working.
It also has some other bootloader (Powerup +Select button +volume UP) - which looks like CWM - but it's not CWM - because phone has stock firmware from Orange mobile company. This loader has even option to install zip from SD card - But when I try to install cm-10.2-20130824-NIGHTLY-i9100.zip ( latest cianogenmod) - it gives an error - that image is NOT SIGNED.
Is there anything I can do ?
Please advice
Click to expand...
Click to collapse
you can try to flash philz kernel. search in original android development section
Sent from my GT-I9100 using xda app-developers app
@junglemike - if u have a broken usb ...i seriously suggest u not to try cm10.2
if recovery doesnt works (like 2 nightlies before) u will be doomed.
I will check this out.
This is a boot loader that I have apart from stock recovery mode:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not sure what it is.
Not sure if this helps.
junglemike said:
I will check this out.
This is a boot loader that I have apart from stock recovery mode:
I'm not sure what it is.
Not sure if this helps.
Click to expand...
Click to collapse
this is the stock android recovery present only wid stock roms.. not present in cm..it will be overwritten by cwm recovery
doctor_droid said:
this is the stock android recovery present only wid stock roms.. not present in cm..it will be overwritten by cwm recovery
Click to expand...
Click to collapse
Thanks.
I understand the risks, I could install stable CM 10 version, or some other stable version.
If only I could figure out hot to install CWM...
junglemike said:
Thanks.
I understand the risks, I could install stable CM 10 version, or some other stable version.
If only I could figure out hot to install CWM...
Click to expand...
Click to collapse
just find the philz kernel zip that can be flashed from stock recovery then flash neatrom. reboot. than flash cm10 or whatever you want
Sent from my GT-I9100 using xda app-developers app
hacklana said:
just find the philz kernel zip that can be flashed from stock recovery then flash neatrom. reboot. than flash cm10 or whatever you want
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I have tried what you suggested:
I downloaded and tried to flash PhilZ touch 3.0.0 temporary flash (file: philz-touch_3.00_i9100-signed.zip)
But it gives me same error: cannot verify the signature.
What I am missing.
Some more questions, sorry if they are too basic
1) PhilZ-cwm6 - Safe Stock Based Kernel - there are many kernels. Which one to choose? This is kernel info of my phone, if it helps:
2) Suppose I succeed to flash PhiZ, why do you suggest to flash neatrom first? why not CM10 right away?
Dear @junglemike,
There is no Philz kernel for gingerbread. Nor will any temporary CWM work on GB!
The way I see it, messing with a phone having a bad USB port is like playing with fire. If something goes wrong, you will have to resort to flashing via Odin (which u can't).
So I suggest you repair the USB port (you can do it yourself too) first.
"To err is human, to forgive is divine."
Sent from my SGS II
Yep. You're nuts messing with your phone with a busted USB port. If anything goes even slightly badly, and it does for almost everyone at some stage, you won't be fixing it.
I am starting to think that you are right.
By the way, friend gave me this phone, because he dropped it in a water, and USB never worked after that. I verified that it is not a bad contact issue. I checked with a tester that all 4 contacts are getting through to the motherboard. Probably some chip got burned when when that friend connected charger when phone was still wet.
I just wanted to upgrade because this jingerbread looks really ugly.
I guess I will stay with that anyway.
Is there any app to replace that ugly unlock screen at least? With something similar to jb4.2 ? I mean a enter point that you move from the. Enter to the right to unlock the phone
Sent from my Galaxy Nexus using Tapatalk 2
I've used widgetlocker before with success. Buy the app and then look on xda for widgetlocker themes, there's literally hundreds
Sent from a galaxy far, far away
junglemike said:
I am starting to think that you are right.
By the way, friend gave me this phone, because he dropped it in a water, and USB never worked after that. I verified that it is not a bad contact issue. I checked with a tester that all 4 contacts are getting through to the motherboard. Probably some chip got burned when when that friend connected charger when phone was still wet.
I just wanted to upgrade because this jingerbread looks really ugly.
I guess I will stay with that anyway.
Is there any app to replace that ugly unlock screen at least? With something similar to jb4.2 ? I mean a enter point that you move from the. Enter to the right to unlock the phone
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
why not update OTA?

[ODIN_ROM] NOTE10.1 2014 SM-P601 PreRooted Multifiles Firmware

PRE ROOT FIRMWARE SM-P601 FOR FLASH VIA ODIN
Rom for flash via PC Odin
Kernel -stock, Recovery - stock
WARNING! After flash this ROMs you are will have: binary - Samsukng official, system - custom and Warranty bit 1
If you needs wipe user data, open recovery and select WIPE DATA/FACTORY RESET
Superuser.apk (SuperSU)
Now you are free to choose what kind of modem and location you prefer to use it because the firmware is divided into three parts
CODE - PDA, MODEM - RADIO, CSC - LOCATION
In addition, you can make owners CSC. Packing cache.img and hidden.img into Odin package use this tool [TOOL] TAR.MD5 PACKAGER
Android - Jelly Bean 4.3
PUSH THE BUTTON
DOWNLOAD:
PDA:
P601XXUAMJ3_ROOT_ODEX 01.10.2013 1697646
P601XXUBMJ8_ROOT_ODEX 14.10.2013 1697646
MODEM:
MODEM_P601XXUAMIA
MODEM_P601XXUBMJ8
CSC:
CSC_P601SERAMIA_HOME Russia
CSC_P601SERBMJ8_HOME Russia
BOOTLOADER:
BOOTLOADER_P601XXUAMJ3
BOOTLOADER_P601XXUBMJ8
How to flash
PUSH THE BUTTON
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Special Thanks
Chainfire for SuperSU
Added
PDA:
P601XXUBMJ8_ROOT_ODEX 14.10.2013 1697646
MODEM:
MODEM_P601XXUBMJ8
CSC:
CSC_P601SERBMJ8_HOME Russia
BOOTLOADER:
BOOTLOADER_P601XXUBMJ8
Will this trip my knox flash counter?
{Diemex} said:
Will this trip my knox flash counter?
Click to expand...
Click to collapse
yes
I have the 601 32gb version but my build number isJSS15J.P601UBUAMJ1
Can i safely use these files?
johnnobts said:
I have the 601 32gb version but my build number isJSS15J.P601UBUAMJ1
Can i safely use these files?
Click to expand...
Click to collapse
waiting on a confirmation that other 601 users (32GB) with diffferent build numbers can still use your files to flash. thanks!
johnnobts said:
waiting on a confirmation that other 601 users (32GB) with diffferent build numbers can still use your files to flash. thanks!
Click to expand...
Click to collapse
Hi... I just flashed the latest build numbers on my 601 32GB and everything is working like a charm. Don't forget to wipe the cache after you finish updating... in my case i ended up in a bootloop. you need to, after updating, reboot and if you get in the bootloop, redtart the note 10 with the power+volume up buttons, go into recovery and wipe the cache. After that, everything is A-OK...
Hope this helps...
Chale
Chaleman said:
Hi... I just flashed the latest build numbers on my 601 32GB and everything is working like a charm. Don't forget to wipe the cache after you finish updating... in my case i ended up in a bootloop. you need to, after updating, reboot and if you get in the bootloop, redtart the note 10 with the power+volume up buttons, go into recovery and wipe the cache. After that, everything is A-OK...
Hope this helps...
Chale
Click to expand...
Click to collapse
which ones above did you use to flash? he lists two
johnnobts said:
which ones above did you use to flash? he lists two
Click to expand...
Click to collapse
The ones that end in J8. But funny thing is, after I installd all my apps and used the tablet for awhile and then restarted, I got into a stuck state on the white SAMSUNG logo. The white leds on the buttons flash, the tablet vibrates, but it gets stuck on a loop... I don't know why.
I go into recovery, flush the cache, but still get into the loop. Then, somehow, I guess by turning on and off the device a zillion times, I get off the bootloop and into the welcome screen and everything is ok again. I don't know why it happens or how to methodically get out of the bootloop state. But when it does boot, it works flawlessly.. Any help??
Thanks all...
Chale
Chaleman said:
The ones that end in J8. But funny thing is, after I installd all my apps and used the tablet for awhile and then restarted, I got into a stuck state on the white SAMSUNG logo. The white leds on the buttons flash, the tablet vibrates, but it gets stuck on a loop... I don't know why.
I go into recovery, flush the cache, but still get into the loop. Then, somehow, I guess by turning on and off the device a zillion times, I get off the bootloop and into the welcome screen and everything is ok again. I don't know why it happens or how to methodically get out of the bootloop state. But when it does boot, it works flawlessly.. Any help??
Thanks all...
Chale
Click to expand...
Click to collapse
your situtation makes me wary of rooting using the above files
johnnobts said:
your situtation makes me wary of rooting using the above files
Click to expand...
Click to collapse
Listen, you can root and try it. If all fails, just boot into Download Mode and use Kies to restore to factory firmware/settings. I did that before and it worked like a charm.
Chale
ok, well thanks for the input buddy.
Hi, can i flash your pda with my stock csc and modem? Would it work and I get rooted? Thanks.
Rooted successfully with this method
Hi,
I did a successful root with this method on my P-601(32GB). I also installed my original csc instead (created with tar-md5 packager). I afterwards uninstalled KNOX to get rid of the SuperSU security warning with TB (a simple freeze is supposed to work also).
In ODIN mode it now says:
Current BInary: Samsung Official
System Status: Custom
Warranty Bit: 1 (it was 0 before)
Justin
---------- Post added at 07:40 PM ---------- Previous post was at 07:37 PM ----------
Black Moon said:
Hi, can i flash your pda with my stock csc and modem? Would it work and I get rooted? Thanks.
Click to expand...
Click to collapse
1. Download the original firmware from samfirmware or other
2. Create the CSC with tarmd5 packager (if not available as a single tar)
3. Install via Odin with your desired modem/csc files
Forgive my severe learning curve difference gentlemen...what exactly does this download do? Do I need it to root or to install a custom recovery or a custom ROM or Kernal? Thanks!
Hi. Just wondering if this is a deodexed version. Thanks!
mscion said:
Hi. Just wondering if this is a deodexed version. Thanks!
Click to expand...
Click to collapse
No, it's odexed.
is there anyway to get a stock rom with root and custom recovery like touchwiz or twp for p600 ? because i do not think the 601 will work on the 600 since the 600 does not have GSM/GPRS
rp4k said:
is there anyway to get a stock rom with root and custom recovery like touchwiz or twp for p600 ? because i do not think the 601 will work on the 600 since the 600 does not have GSM/GPRS
Click to expand...
Click to collapse
Even if not, you can use CF-AutoRoot method, then install TWRP from their thread in "Original Android Development". You'll lose nothing and get the rooted device with custom recovery and warranty bit 1 (0 is normal state)
Thanks allot

Categories

Resources