Related
To be clear, these will only work for AOSP ROMs and the GoogleEdition ROM.
Threw these together for myself. Love having the navbar but it is a pain to add every nightly I flash. So I threw this together. I made two versions. One simply adds the navbar and disables the capacitive menu and back buttons (with them active the navbar becomes nearly impossible to use) and triggers the navbar. Fear not, this mod triggers the in app menu overflow access and for that matter you could then create a menu on the navbar. I couldn't automate disabling the backlight so that will still need to be disabled via settings>advanced>sensors. I also made a version that changes the device DPI from 480 to 360 (my preferred DPI).
Download - AOSP_navbar_enabled.v3.zip
Base version above now allows OTA survival. Will reapply itself after each nightly.
Download - AOSP_navbar_enable_360dpi.zip
Download - AOSP_remove_NAVBAR.v3.zip
Here is the method to inject changed into the build.prop that I used (found here)
On the GoogleEdition ROM it does not support disabling the capacitive button backlights natively so the app from the following thread is needed
[APP] Google Edition ROMs - Disable Button Lights
Thanks a million times for this! I have been missing these! I am running beans rom and after installing getting system UI has stopped, also using nova, any information on getting this going would be great, thanks again!
templton said:
Thanks a million times for this! I have been missing these! I am running beans rom and after installing getting system UI has stopped, also using nova, any information on getting this going would be great, thanks again!
Click to expand...
Click to collapse
Guess I wasn't clear. This is for AOSP ROMS only. I will edit the OP, sorry for the confusion.
Sent from my Nexus 7 using Tapatalk 2
Ah no no, my fault! I see it right in the first line! I wasn't paying attention or must have been half asleep!! Thanks again though :good:
templton said:
Ah no no, my fault! I see it right in the first line! I wasn't paying attention or must have been half asleep!! Thanks again though :good:
Click to expand...
Click to collapse
No I want very clear. I added the first line after your misunderstanding.
Sent from my Galaxy S4
Sorry but...How do you install this?
I tried looking for instructions...There are none.
chris2k5 said:
Sorry but...How do you install this?
I tried looking for instructions...There are none.
Click to expand...
Click to collapse
They are recovery flashable mods. Download, reboot recovery, install zip (no wipes needed), enjoy!
Sent from my Galaxy S4
The link for the remove navbar mod doesn't work. Does anyone have the .zip file?
chris2k5 said:
The link for the remove navbar mod doesn't work. Does anyone have the .zip file?
Click to expand...
Click to collapse
It works fine for me on my phone and chrome browser, I don't know why you are having trouble. Try this instead
https://copy.com/JcV4Z <---remove navbar
Sent from my Galaxy S4
A fixed navbar taking up space precious on a small display seems Nexus- like. Stop this abomination NOW! Instant S4 mini (comparable display space usable for apps).
rushless said:
A fixed navbar taking up space precious on a small display seems Nexus- like. Stop this abomination NOW! Instant S4 mini (comparable display space usable for apps).
Click to expand...
Click to collapse
Of course you are welcome to your opinion!! And in part I agree. That is why I run at 360dpi, that way it has less of an impact on the display. I know it is not for everyone, but choice is the spice of life.
hlxanthus said:
Of course you are welcome to your opinion!! And in part I agree. That is why I run at 360dpi, that way it has less of an impact on the display. I know it is not for everyone, but choice is the spice of life.
Click to expand...
Click to collapse
Thanks for this. Is it possible to only activate the in app menu overflow without adding the nav bar? It's so much more intuitive to have that, rather than guessing whether or not the menu button will do anything within each app (the whole reason google got rid of the menu button in the first place).
I wish I knew how!! To be frank, when you enable the navbar and disable the capacitive buttons it activates the menu overflow within apps all by itself. Must be part of the navbar framework. But let me look into it. I MIGHT have an idea but it would be ROM specific, not a general mod like this. What ROM are you running or would like such a feature for?
Sent from my Galaxy S4
hlxanthus said:
I wish I knew how!! To be frank, when you enable the navbar and disable the capacitive buttons it activates the menu overflow within apps all by itself. Must be part of the navbar framework. But let me look into it. I MIGHT have an idea but it would be ROM specific, not a general mod like this. What ROM are you running or would like such a feature for?
Sent from my Galaxy S4
Click to expand...
Click to collapse
Running both the Verizon Google Edition ported rom and Clean Rom. Appreciate it, but don't bother putting time into it if it's ROM specific. What you have posted here already is helpful enough!
johnfoam said:
Running both the Verizon Google Edition ported rom and Clean Rom. Appreciate it, but don't bother putting time into it if it's ROM specific. What you have posted here already is helpful enough!
Click to expand...
Click to collapse
I will try for the GE port, it should be an easy mod. These don't work on stock touchwiz as it doesn't have the needed framework for the navbar. For some reason Samsung gutted the navbar from their source
Sent from my Galaxy S4
hlxanthus said:
I will try for the GE port, it should be an easy mod. These don't work on stock touchwiz as it doesn't have the needed framework for the navbar. For some reason Samsung gutted the navbar from their source
Sent from my Galaxy S4
Click to expand...
Click to collapse
Sounds good. Appreciate it!
johnfoam said:
Sounds good. Appreciate it!
Click to expand...
Click to collapse
Merry Xmas. I also posted this over in the GoogleEditionVZW thread
Download - GoogleEditionVZW_3dot.menu.overflow.zip
hlxanthus said:
Merry Xmas. I also posted this over in the GoogleEditionVZW thread
Download - GoogleEditionVZW_3dot.menu.overflow.zip
Click to expand...
Click to collapse
Thank you my friend, I'll give it shot today!
Oh it works very nice, but there are some cases (like tapatalk) where the menu would instead be within the navbar so this is not a capacitive menu replacement
Sent from my Galaxy S4
Awesome job man. Now I just need to be able to set the physical home button to menu for short press and go full screen (no navigation lights) on long press. Think that is possible?
Sent from my SGH-M919 using xda premium
Requires Xposed Framework!
Hey guys,
this is the first project I'm sharing on here, so be gentle
After stumbling across the Xposed framework one or two ideas came to mind and I made a module out of them:
Hide the "Swipe to unlock" text from the lock screen on my Xperia Z1c
Enable the CRT off animation
Prevent the screen from turning on when unplugged from the charger
The first two things work nicely on my Xperia Z1c, the third however I could not get to work.
APK and source for the first version are attached.
I don't know if this is of much use for anyone else, but I would be glad if someone could help with the third option.
Update v2:
The third option works now, the new version 2 is attached.
If activated, the screen will not turn on when connected to (or disconnected from) either charger or dock.
Update v3:
I uploaded a new version (attached) which adds the following options:
Hide the camera icon on the lock screen
Hide the carrier label on the lock screen of some Xperia devices
Hide the sparkles effect on the lock screen of some Xperia devices
Update v4:
I uploaded a new version which adds an option for disabling the analog clock face above the list of alarms on some Xperia devices.
Update v5beta2:
The new version adds preliminary support for Lollipop (untested).
You're welcome to try it and give feedback.
The module can also be found on the Xposed repo: http://repo.xposed.info/module/net.feichti.screentweaks
You say the "disable screen on on unplug" doesn't work, I haven't had a chance to check yet, but I've looked at your code an found the following
Correct me if I'm wrong, but as far as i can see on line 56 on ScreenTweaks.java, you are getting a value as a string from pref and checking if it equals "on" or "off". Why not just save a boolean?
secondly, line 39
mPrefs = new XSharedPreferences(MY_PACKAGE_NAME);
Don't you need the file name as well? Again, sorry if I am wrong about this
Otherwise, sounds like a great mod, will try it now
Hey hamzahrmalik, thanks for your reply.
The setting on line 56 is for the CRT animation, and it's that way so I can select to not do anything (don't change system default).
The other thing is correct, because I want the default shared preferences for the module package.
Well, looks like I was looking in the wrong place.
The setting for not turning on the screen works just fine if I connect a charger, but I was always testing it with the dock, which is something different.
Dock aware don't-turn-on coming soon...
thanks for work
any chance to disable the "stars effect" under the finger while unlocking?
maybe also remove the camera icon?
I have tried this on xperia z1 and it does not work
Sent from my C6903 using XDA Premium 4 mobile app
Dear Pezo,
Thank for the work, the crt-off works perfectly on my Xperia Z1c and it looks very nice!
The first option doesn't count for me because i dont use a lockscreen. The third i wil test later today and report the result.
:good:
Antho02 said:
thanks for work
any chance to disable the "stars effect" under the finger while unlocking?
maybe also remove the camera icon?
Click to expand...
Click to collapse
I have also thought about removing the camera icon, I will look into it the next few days.
About the stars effect, I rather like it, but maybe I will look into that as well.
HellRoot said:
I have tried this on xperia z1 and it does not work
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Another user said it's working on the Z1, do all of the features not work?
Just to make sure, you have enabled it in the Xposed installer?
Pezo said:
I have also thought about removing the camera icon, I will look into it the next few days.
About the stars effect, I rather like it, but maybe I will look into that as well.
Another user said it's working on the Z1, do all of the features not work?
Just to make sure, you have enabled it in the Xposed installer?
Click to expand...
Click to collapse
Yes it was enabled and nothing worked for me..i am on monx rom kitkat
Sent from my C6903 using XDA Premium 4 mobile app
Oh well, I was just looking for your ROM and it seems it doesn't exist any more...
Could you send your Xposed log, maybe I can fix some features for you.
Sent from the Delta Quadrant.
Pezo said:
I have also thought about removing the camera icon, I will look into it the next few days.
About the stars effect, I rather like it, but maybe I will look into that as well.
Click to expand...
Click to collapse
i hate it ahah, i prefered 4.3 lockscreen because of the stars
well if you can do it, i d great you much!! two weeks i m looking a way or module to make it
thanks again
Antho02 said:
thanks for work
any chance to disable the "stars effect" under the finger while unlocking?
maybe also remove the camera icon?
Click to expand...
Click to collapse
The new version has both these features, please test them and let me know if they work.
Pezo said:
The new version has both these features, please test them and let me know if they work.
Click to expand...
Click to collapse
hi!
just tested, works flawlessly!!! thank you very much man!
i love my new lock screen
I think there is a bug on disable screen sparkles. After activate the sparkles gone forever, also after uncheck or deinstalling the mod - the Sparkles never come back! Anyone can confirm that?
Schloevogt said:
I think there is a bug on disable screen sparkles. After activate the sparkles gone forever, also after uncheck or deinstalling the mod - the Sparkles never come back! Anyone can confirm that?
Click to expand...
Click to collapse
Did you restart your device?
I deactivated this option and I have the sparkles...
yes… restarted, deactivated the Mod and also completly deinstalled… no sparkles anymore…. using monx kitkat rom (sony stock based). Any Suggestion?
Schloevogt said:
I think there is a bug on disable screen sparkles. After activate the sparkles gone forever, also after uncheck or deinstalling the mod - the Sparkles never come back! Anyone can confirm that?
Click to expand...
Click to collapse
i tried and works good for me, sparkles are back with no problem. :/
Schloevogt said:
yes… restarted, deactivated the Mod and also completly deinstalled… no sparkles anymore…. using monx kitkat rom (sony stock based). Any Suggestion?
Click to expand...
Click to collapse
I have no idea, but it can't really be my module, since I don't change any persistent settings.
Just to make sure, you did restart your phone AFTER deactivating the module, right?
Sent from the Delta Quadrant.
Okay...thanks anyway for your mod/help!
Tryed clean install on "PureStock" and here its working flawless! Returned to clean "Monx" and it happens again, maybe its rom releated! :fingers-crossed:
Does hiding the camera icon also disable the swipe camera shortcut from lockscreen?
Download it from Playstore
Requirements:
Android 4.0+ and ROOT
Xposed Framework
You can read Xposed Framework FAQ to understand more about compatibility.
This is a simple app.
Security will be toggled after each successful shake.
Install Instructions
★Install Xposed Installer
★Install Xposed Framework (from the Xposed Installer app)
★Install Shaky
★Activate the module in Xposed Installer app
★Configure the application as you like
★Soft reboot the phone to see the changes
If you find any bugs or issues,, please report here...
I will support u ASAP...
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures of the app. No warranties of any kind are given.
XDA:DevDB Information
Shaky 4.0+, Xposed for all devices (see above for details)
Contributors
FemBlack
Xposed Package Name: ind.fem.black.rayyan.xposed.shaky
Version Information
Status: Stable
Created 2014-06-14
Last Updated 2014-06-14
Reserved
Reserved
Reserved also m8!
Στάλθηκε από το GT-I9100 μου χρησιμοποιώντας Tapatalk
works perfectly on my Galaxy S4-i9505 Android 4.4.2 stock.
thanks for this great module
badkill said:
works perfectly on my Galaxy S4-i9505 Android 4.4.2 stock.
thanks for this great module
Click to expand...
Click to collapse
thanks for the info i just tested this wit nex 5 ...
FemBlack said:
thanks for the info i just tested this wit nex 5 ...
Click to expand...
Click to collapse
in future updates could maybe work for unlocking?
Another great work, works just fine on CM11
badkill said:
in future updates could maybe work for unlocking?
Click to expand...
Click to collapse
thank u for the suggestion i will add tat option in future...
FemBlack said:
Security will be toggled after each successful shake.
Click to expand...
Click to collapse
FemBlack said:
★Soft reboot the phone to see the changes
Click to expand...
Click to collapse
Sorry, i did not get what this module does. Which security is toggled? And between which modes?
defim said:
Sorry, i did not get what this module does. Which security is toggled? And between which modes?
Click to expand...
Click to collapse
if u have enabled pattern lock or pin lock or face lock... u can toggle tat to slide lock...
FemBlack said:
if u have enabled pattern lock or pin lock or face lock... u can toggle tat to slide lock...
Click to expand...
Click to collapse
@FemBlack thanks for this module. Very useful for me.
Running this on note 3 modified stock rom.
I need this module as the exchange setting that i use forces me to use a pin lock .
This app is able to overcome it and I can toggle it when I leave home.
Suggestions / Requests
1- Ability to toggle between pin lock and no lock screen ( including no slide to lock )
2- Ability to add other triggers like nfc or wifi to do the toggle. May be add as a pro version .
Thanks
I'm afraid the module description is not very clear. And apparently is doesn't work for me on my Moto X, or maybe i'm just not understanding how to set it up. :cyclops:
In lg optimus l3 with ics 4.0.4 it worked after the reboot and then stopped and it worked only after reboot my phone but only for one time
G.M.L._V7
http://pasakalis.blogspot.gr
Using this mod seems to have disabled access to the status bar in the lockscreen even when I have slide to lock enabled. Is this intended or is it a bug? Could you please look into it? Thanks for the great module!
Sent from my Nexus 4 using Tapatalk
aalupatti said:
@FemBlack thanks for this module. Very useful for me.
Running this on note 3 modified stock rom.
I need this module as the exchange setting that i use forces me to use a pin lock .
This app is able to overcome it and I can toggle it when I leave home.
Suggestions / Requests
1- Ability to toggle between pin lock and no lock screen ( including no slide to lock )
2- Ability to add other triggers like nfc or wifi to do the toggle. May be add as a pro version .
Thanks
Click to expand...
Click to collapse
thank u for the suggestion in future i will add..
G.M.L said:
In lg optimus l3 with ics 4.0.4 it worked after the reboot and then stopped and it worked only after reboot my phone but only for one time
G.M.L._V7
http://pasakalis.blogspot.gr
Click to expand...
Click to collapse
pls share the error.log file
karanrajpal14 said:
Using this mod seems to have disabled access to the status bar in the lockscreen even when I have slide to lock enabled. Is this intended or is it a bug? Could you please look into it? Thanks for the great module!
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
thanks for reporting the bug i will check about it..
Thanks for this module. :good:
I have Tasker toggle between pin / slide when connected to home wifi. Sometimes I would like to temporarily disable my pin and Shaky will do that. My concern would be that I would forget to shake again to make pin active, maybe on break at work and someone needs something while I have shaken to disable my secure pin, and I place phone in pocket, and forget to shake again.
Is it possible to have a timer and a default secure state defined in the module? Maybe have a countdown time that Shaky will toggle back to a default security, i.e., in xx minutes it toggles to pin lock after I shake to toggle pin off.
The other thought is to have a simple status bar indicator of state, such as a dot on/off so the user understands but it will not alert someone who might pick your phone?
Thanks for your work.
When the screen is open:
the application locks the phone and turning off the monitor by making a vibrating.
When the display is closed:
It only makes vibrating.
the module would have to do something else or do something wrong;
--------------------------------------------------------------------------------
EDIT: all ok, just understand what the application does.
--------------------------------------------------------------------------------
Shake has to be really hard, but it works on my Sprint Galaxy S3 on 4.4.2
Hey, since I bought my Pixel 2 Xl, I saw on videos those nav bar burn in and so I've tried both immersive and Tulsadiver Mod, Navbar Gone with Swipe Navigation with Edge Gesture. Immersive is good but it doesn't get rid of the nav bar completely and everytime I Swipe up Navbar gets up so i discarded the Immersive mode.
Then i tried Navbar gone, it worked great until some apps like Google photos crashed randomly. I checked if it was anything installed on my phone but i did a factory image reset and install just Magisk and the mod and it when crashing again.
Looking at my old devices (Nexus 5) and tried to use what i did use back in the day to remove my navbar to use pie and boom! It worked flawless and no crashing with any app. Obviously you need ROOT.
I only tested on stock ROM**
I'M NOT RESPONSIBLE FOR ANYTHING YOU DO WRONG, ALWAYS BACKUP YOUR DATA
REMEMBER TO DOWNLOAD SOME NAVIGATION APP BEFORE DOING THIS.
[YOU NEED ROOT]
1.Download a Build.Promp Editor /I used https://goo.gl/jXvZSu
2. Grant root access and press the edit button
3. Go to the last line press enter (Wich will create a new line)
4. Add this on a new line: "qemu.hw.mainkeys = 1" (without the quotes)
5. Save and reboot.
I'd hope I've helped someone
This isn't really new but I'm sure your post will be helpful to some, nonetheless.
One thing I want to stress is that it is crucial to download and setup an app like Pie Control (Play Store link), Unique Controls (Play Store link), or Gesture Control (Play Store link) prior to disabling your nav bar. Otherwise you'll have no way to navigate around, making downloading and installing one of these nav bar apps after the fact, extremely difficult.
Will this work on any room? For example carbon?
quinejh said:
Will this work on any room? For example carbon?
Click to expand...
Click to collapse
I haven't tried this on another ROM only stock sorry i didn't specify ?
quinejh said:
Will this work on any room? For example carbon?
Click to expand...
Click to collapse
Nandolkz said:
I haven't tried this on another ROM only stock sorry i didn't specify
Click to expand...
Click to collapse
It should work on any ROM. I've personally used this method to disable nav bar on stock as well as Lineage OS, with no issues. Carbon should be fine too.
If you want to do this system-lessly, my magisk module does same thing.
https://github.com/Magisk-Modules-Repo/magisk-module-hide-navbar
I'd suggest using LMT launcher instead of pie control. Same features but no ads and it's neat
AndroPlus said:
If you want to do this system-lessly, my magisk module does same thing.
https://github.com/Magisk-Modules-Repo/magisk-module-hide-navbar
Click to expand...
Click to collapse
After updating to Pie for some reason this module no longer works.
Haunt3r said:
After updating to Pie for some reason this module no longer works.
Click to expand...
Click to collapse
On my P2XL with Pie it works.
Maybe you have to update Magisk to v16.7 (latest one)
AndroPlus said:
On my P2XL with Pie it works.
Maybe you have to update Magisk to v16.7 (latest one)
Click to expand...
Click to collapse
Can confirm I'm on magisk 16 1674. I've also completely wiped my device and started fresh and the mobile still didn't work. ?* I'll just modify build.prop I guess
AndroPlus said:
If you want to do this system-lessly, my magisk module does same thing.
https://github.com/Magisk-Modules-Repo/magisk-module-hide-navbar
Click to expand...
Click to collapse
Thanks, Works on Stock PIE.
You guys Dan also try the "custom navigation bar" app which will allow you to select invisible icons. Not a perfect solution but it works well.
Very tks
To add my five cents:
Been using Fluid Navigation Gestures application for a while. With the last update before public release it became mature enough to recommend it.
You can disable navbar / it has various options. Try it: https://play.google.com/store/apps/details?id=com.fb.fluid
Gregzi said:
To add my five cents:
Been using Fluid Navigation Gestures application for a while. With the last update before public release it became mature enough to recommend it.
You can disable navbar / it has various options. Try it: https://play.google.com/store/apps/details?id=com.fb.fluid
Click to expand...
Click to collapse
I was watching a YouTube video that was using this app. Tried it out and it's great. Love the animation at the bottom when you use it
I use Fluid Navigation Gestures as well and it's brilliant. It's well worth the money for the pro too!
matekaneve said:
I use Fluid Navigation Gestures as well and it's brilliant. It's well worth the money for the pro too!
Click to expand...
Click to collapse
Thanks you for the tip! Works flawless and looks very nice
doesnt work!!
im on the latest version of stock pie, rooted with magisk.
This just doesnt work for me at all.
Ive tried using a build.prop editor
Ive tried adding it using adb shell, to see if it made a difference.
NOTHING WORKS!!
The magisk module doesnt work.
Any ideas as to why? I dont want to install another 3rd party app.
Ive always just added the build.prop setting, and used pie control from the play store.
HELP!!
(on a funnier note, i just realized that the last time i edited my profile i was using the HD2 as my daily driver)
---------- Post added at 07:34 PM ---------- Previous post was at 07:00 PM ----------
I had found this sometime ago and couldnt find it again. just found and implemented it.
while this doesnt completely disable it, its definitely better than having the navbar always present. Works with Android P.
it also has instructions on how to hide the status bar, as well.
https://forum.xda-developers.com/xperia-xz1/how-to/hide-navbar-statusbar-via-adb-root-t3918481
Works on Android 10! Thanx!
Hi XDA !
Today i'm proud to announce you that my very first module is now available on Xposed Repository
DeepScreen Oreo
What's DeepScreen Oreo?
DeepScreen Oreo is a module that allows you to set different modes of screen including Immersive mode .
This module can set Immersive Mode without Stuck Black Screen Problem due to Oreo Update
Click to expand...
Click to collapse
How does it works?
Download the module, launch UI, grant root access and choose your mode.
Click to expand...
Click to collapse
What Screen Mode can i set?
-Full Immersive Mode : Hides both Nav and Status Bar
-No Nav Bar Mode : Hides Navigation Bar Only
-No Status Bar Mode : Hides Status Bar Only
-Stock Mode : Set default Values, display both Nav and Status Bar
Click to expand...
Click to collapse
Support
This XDA thread, I'll upload the Source Code to my Github ASAP.
As soon as you credit me, feel free to modify the application and upload your changes.
If Anyone has Suggestion or encounters any issues , please report back to me on this thread
Click to expand...
Click to collapse
Special Thanks to XDA and rovo89
Click to expand...
Click to collapse
Known Issues
May Conflict with some Custom Rom, be careful if you use Heavely Modified ROMs (AOSP Or AOSP Close, Stock or slightly modified ROMs Are Safe, tested it Myself
Click to expand...
Click to collapse
Xposed Page Link : http://repo.xposed.info/module/fr.merams.r.deepscreenoreo
So, the module has been downloaded 47 times , anyone to give a feedback? Which device are you using, does it works with another android version (this should from Jelly Bean to Oreo)?
Thanks
Thank you for the great Modul, works perfectly on Samsung Note 8 Oreo 8.0. Xposed is not needed, only root.
It's not in my List
Sent from my SM-N950F using XDA Labs
But works
Sent from my SM-N950F using XDA Labs
Thanks for the feedback :laugh: ! As I said on the Xposed page, Xposed is indeed not really needed but root is, it don't need to be activated or reboot juste download grant root access and here you go :good:
Delete dalvik and cache is absolutely necessary, otherwise bootloop.
Tested on S8 Plus with Renovate and Note 8 Dr. Ketan ROM
Sent from my SM-G955F using XDA Labs
---------- Post added at 01:17 PM ---------- Previous post was at 01:14 PM ----------
Baradoura said:
Thanks for the feedback :laugh: ! As I said on the Xposed page, Xposed is indeed not really needed but root is, it don't need to be activated or reboot juste download grant root access and here you go :good:
Click to expand...
Click to collapse
But that's not an Xposed modul, it's a root app. Xposed is the wrong place.
Sent from my SM-G955F using XDA Labs
Mhmm strange issue? Tested it on My Xperia XZ1 8.0 And AOSP almost Stock Rom on my girlfriend's S8 too, no bootloop problem, even without deleting dalvik, are you really sure this isn't coming from another module?
Thanks to report either way :good:
During afternoon, I'll upload the source code to my github and provide a link to it right here, you'll see there's nothing really special, it my opinion, it may conflict with Custom Rom may be, but AOSP or AOSP Close Rom don't really conflict I guess (My XZ1 And my Girlfriend's S8 Are Stock)
We don't really know if the bootloop comes from this module or another, or even this module on a custom ROM
Need more feedback but for the time being be careful if you use a custom Rom.
AOSP or Close AOSP are safe I can comfirm it
Has anyone knows how to disable immesrsive mode system-wide (navigation bar ALWAYS visible) ? I want to make navbar always visible, in other words prevent it from hiding. Some apps autohides navigation bar which is very annoying, especially when app not responding and you want to close it with long press back button or just want to switch to another app.
Borchuck said:
Has anyone knows how to disable immesrsive mode system-wide (navigation bar ALWAYS visible) ? I want to make navbar always visible, in other words prevent it from hiding. Some apps autohides navigation bar which is very annoying, especially when app not responding and you want to close it with long press back button or just want to switch to another app.
Click to expand...
Click to collapse
Hi, this application has a function that hides status bar and displays nav bar, if you're root just give it a try, your feedback is welcome
Just make sure you're not using a Heavely modified custom ROM, for the time being I'm not sur if it causes bootloop but I préfère you not to risk it
Baradoura said:
Hi, this application has a function that hides status bar and displays nav bar, if you're root just give it a try, your feedback is welcome
Just make sure you're not using a Heavely modified custom ROM, for the time being I'm not sur if it causes bootloop but I préfère you not to risk it
Click to expand...
Click to collapse
Tried that -apps are still able to hide navbar. I want to prevent this.
Which app are able to hide it ?
I may update the app if needed
Borchuck said:
Tried that -apps are still able to hide navbar. I want to prevent this.
Click to expand...
Click to collapse
Which app are able to hide it ?
I may update the app if needed
What's your setup? Android version, Phone Model ect..?
Baradoura said:
Which app are able to hide it ?
I may update the app if needed
What's your setup? Android version, Phone Model ect..?
Click to expand...
Click to collapse
Well, unfortunatelly most of newer games are hiding navbar. Also some emulators like Fpse or SuperRetro16. I have Moto Z2 Play and I'm on Nougat 7.1.1.
With screen ratio 18:9, we still have black space at the top and the bottom right?
lemonade747 said:
With screen ratio 18:9, we still have black space at the top and the bottom right?
Click to expand...
Click to collapse
With My Note 8 it goes to fullscreen if you hide both bars! Guess it depends on the app and if it does support said DPI
OnePlus 5T oxygen 5.0.3 Oreo 8.0, 8gb, Xposed via Magisk.
Many thanks for the module, I'm experiencing the issue of auto disable the functionality every time the screen goes off, so when I unlock it or simply goes on I've to restart the hiding functionality.
Annoying
Here working perfect , thanks
bluenumb said:
OnePlus 5T oxygen 5.0.3 Oreo 8.0, 8gb, Xposed via Magisk.
Many thanks for the module, I'm experiencing the issue of auto disable the functionality every time the screen goes off, so when I unlock it or simply goes on I've to restart the hiding functionality.
Annoying
Click to expand...
Click to collapse
When rebooting device it's absolutely normal to restart the app, didn't found a way yet to force immersive mode once and for all, and I don't wanna try it right now because it's directly the system who's involved, I need more practice to find a way
Now, the fact that everytime you lock your device you have to restart DeepScreen, that's pretty strange and I didn't experienced it on my phone nor my GF's, does Oxygen is a Custom Rom? Your device has been heavely modified?
Komekokos said:
Here working perfect , thanks
Click to expand...
Click to collapse
No problem thank you too for trying this app ?