beIN SPORTS erreur 8 (0) - Android Q&A, Help & Troubleshooting

beIN SPORTS erreur 8 (0)
Cause : Root détecté par l’appli beIN SPORTS ( busy box ; su binary ; SuperSU ; Superuser … )
Remede : Unroot du tel après démarrage
Avant de commencer : ! Faire un backup cwm ! et une copie de votre app superuser
Dans votre app suseruser autoriser les app au démarrage
Tester vos applis root et essayer d’appliquer les mods au démarrage (exemple : no frills CPU)
1: Verifier et déplacer les composants installés:
Tool: "Got Root ?"
lancer test run et regarder les composants installés
Tool : link2sd (ou autre) :
Déplacer l’app supersu en app utisateur si app system
2 : Désinstaller busy box si present dans System/xbin
Tool : “Busy box free”
Si Busy box est installé par la rom elle même il faut réinstaller avec “Busy box free” par dessus.
Ensuite désinstaller busy box avec “Busy box free”
3 : Cacher l’ appli « Super user » et conserver le root au démarrage
Tools : “Hide my root”
Utiliser Uninstall su app ; sélectionner le Super user installé et le désinstaller
4: Redémarrer le tel :
5 : Cacher su binary ( fichier « su » dans System/xbin ) et vérifier :
Tools : “Hide my root”
Utiliser : Hide su binary (Ensuite Hide my root sera capable de restaurer « su »)
Tool: "Got Root ?"
lancer test run et regarder les composants installés (False partout)
! Vous pouvez lancer beIN SPORT !
Si vous voulez re-rooter le tel :
Tools : “Hide my root” restore su binary pui réinstaller votre app superuser avec votre copie
Moderator translation...please post in English! Those are the rules...
Cause: Root detected by the application beIN SPORTS (busy box, su binary; SuperSU; Superuser ...)
Remedy: Unroot after start of such
Before you begin: Make a backup cwm! and a copy of your app superuser
In your app suseruser allow app start
Root test your apps and try to apply the mods start (eg no frills CPU)
1: Check and move components installed:
Tool: "Got Root?"
launch test run and watch the components installed
Tool: Link2SD (or other):
Move app to app supersu utisateur if app system
2: Uninstall busy box if present in System / xbin
Tool: "Busy box free"
If Busy box is installed by the ROM itself must be reinstalled with "Busy box free" above.
Then uninstall busy box with "Busy box free"
3: Hide App "Super user" and keep the root at startup
Tools: "Hide my root"
Use su Uninstall app; select the Super user installed and uninstall it
4: Restart the phone:
5: Hide su binary ("su" in System / xbin file) and check:
Tools: "Hide my root"
Use: Hide su binary (Then Hide my root will be able to restore "su")
Tool: "Got Root?"
launch test run and watch the components installed (False everywhere)
! You can start beIN SPORT!
If you want to re-rooter on tel:
Tools: "Hide my root" su binary restore and reinstall your superuser app with your copy

sorry,
Sorry , it for a french app for french user so i write it for french user who speak french ...thx for the nice translation !

Salut,
Merci pour le post @Speedo.thc (quoiqu’un peu confus ), mais depuis le temps il n'y aurait-il pas une autre méthode ?

thanks OP.
wondering if there is a simpler way.

I tried to ask the question on the Rootcloak topic but no answer so far.
I'm using Cyanogen 13.0 on a OnePlusOne.
It's possible de desativate the root in the developper option but it's no enough for BeIn Sports app.
It would probably be easier to hack this application to enjoy a service I'm paying for ........
This seems to be to much trouble and I want to be able to use Tasker and BeinSport without rebooting the phone >.<

Xposed + Rootcloack2 doesn't work?

Thanks

Kéno40 said:
Xposed + Rootcloack2 doesn't work?
Click to expand...
Click to collapse
No, I have tried that with Bein Connect app it did not work.

Soufiene said:
No, I have tried that with Bein Connect app it did not work.
Click to expand...
Click to collapse
Hi,
this post was more that one year old.
Maybe you could search on more recent solutons.
Magisk + hideSu?

Kéno40 said:
Hi,
this post was more that one year old.
Maybe you could search on more recent solutons.
Magisk + hideSu?
Click to expand...
Click to collapse
Unfortunately it doesn't work either. Bein detects root even with latest magisk and suhide.
Sent from my SM-G935F using Tapatalk

Related

Phantom ROM V1.0 (French ROM for NIKI)

Phantom ROM V1.1 (French ROM for NIKI)
It's my first ROM and it was a very hard work for me.
This ROM is based on the Bouygues Telecom ROM (Clean ROM)
OS 5.2.1622 (build 18129.0.4.5)
Changelog from BT ROM :
Add :
Cube 4 slides
Marshal Keyboard
MortPlayer
Notepad
PHM Registry Editor
WMA PhoneProfile
PocketCM
Pocket RAR
Slide 2 Unlock
SMSDRFix
TodayAgenda
Total Commander
WkTaskL
HHC
Quick Menu
Registery Tweaks :
Auto disconnect data connection
Incrasing AD2P bitrate
Disable certificat warning
Incrasing keyboard light time
Enable MicroSD PowerManagment
Enable Cache FS
Storage memory :
Total : 125,41Mb
Used : Mb
Free : Mb
Program memory :
Total : 101,42Mb
Used : Mb
Free : Mb
For TomTom User's :
Install TomTom Navigator on Storage Card (\Carte de Stockage\TomTom\tomtom navigator.exe)
TomTom on the 4th side of Cube launch a MortScript script \Windows\TTN6.mscr who :
-rotate the screen
-incrasing volume
-launch tomtom
ToDo for the next Release :
-Upgrade software
Thanks :
XDA for this forum
Please, don't ask me for another language for moment, I've lot of work for the next french release.
Only reply in english (with French translation if you want)
HTC NIKI Phantom French ROM V1.1
Yeah Man You have finish your hard work!!! Sorry but, I can't test, because I have sold my phone
Ok, I'm still waiting for SFR to unlock my phone so I can use it with my actual Bouygues SIM, but it should be done (finally) this week. And then I'll test your rom.
I find the installation instructions very complicated, and I'm not sure I did understand every step of the installation, so I'll resume :
1 - download sspl-1.16-nike.zip, unpack, remove sim and sd card form the niki, power it, connect usb, copy the executable on the phone, launch it from the phone, and a screen with 3 colors should appear, disconnect and reconnect the usb cable.
2 - download the flash-hardspl-niki.zip, unpack it, and launch the romupdateutility.exe, follow the steps.
3 - Power off the phone, power on again, launch sspl, wait for the 3 colors to appear, disconnect and reconnect the usb cable, launch the CustomRUU.exe from your archive, follow the steps et hop c'est la victoire ?
Or maybe this is all wrong, so please correct me, I didn't find a clear tutorial on this subject. Or at least not clear for me.
Anyway, have a nice day !
No, it's not so complicated :
- download everything you'll need : sspl, hardspl and your favorite ROM (or anything you want to flash on your Niki).
- be sure of your battery level, don't forget flashing is dangerous if it's stopped before being finished
- then follow the steps they quoted : remove SD and SIM card, connect your device via USB, copy the sspl EXE on it and run it from the NIKI : then "USB" should appear on your Touch Dual.
- unplug and replug the cable, if I well remember, it will install some drivers under Windows but shouldn't be a problem (even if I ran it from Vista ).
- finally, run the ROMUpdateUtility from the hardspl archive (after having extracted it !).
Once you've done it, you'll just have to plug your Dual via USB when you'll want to flash a new ROM via its ROMUpdateUtility (I only know hardspl, I never tried uspl, sorry...). No need to re-execute sspl (what I thought first time I flashed)...
And you don't have to wait for SFR to unlock your Niki : there's a difference between SIM Unlock (what you want SFR to do I think) and CID unlock (what I describe here, that allow you to change your ROM (but not your SIM card))
PS : Sorry for my english...
1 - Remove SIM card and Micro SD card
2 - Boot Windows on your Phone
3 - Connect USB cable
4 - Via activesync, copy and launch sspl-1.16-nike.exe on your phone (sspl-1.16-nike.zip)
5 - Your phone will boot on the SPL (3 color)
6 - Wait for USB appear at the bottom of your screen
7 - Disconnect and reconnect USB and wait USB appear
8 - Download flash-hardspl-niki.zip and launch ROMUpdateUtility.exe
Congratulation, your phone have hardSPL installed
Your can download and install all rom (for niki) you want.
Just download a ROM and launch CustomRUU.exe or ROMUpdateUtility.exe with your phone connected.
HardSPL is permanent, you don't have to re-install HardSPL when you want to flash your phone the next time.
Ok, thank you guys !
The fact that I wait for my phone to be sim unlocked is because otherwise I don't have any utility of it.
I have recieved 15 htc dual for my enterprise, but they are SFR locked, and we'll recieve the sim cards in april. So in the meantime I did ask to have 3 of them unlocked so I could use it with my bouygues sim.
/mylife
I've found a bug (see the original post at the bottom)
Hello, I've tested your ROM for just 1 hour now.
my 2 cents :
The splash screen is too long to load, and I don't know how to deactivate it.
The icons of the fourth side of the cube aren't really nice, imho.
There's a bug in the contacts, when I search. It's a bit complicated, so I'll explain it in french :
Lorsque l'on tape une lettre pour accéder à un contact, il ne prend que la première. Si je veux aller à la lettre "p", je tape 2 fois sur la touche o/p, et il prend "oo" au lieu de "p". si j'appuie sur del pour effacer, la première lettre reste toujours sélectionnée.
Bon, c'est pas très clair, mais je me comprend.
Otherwise, I didn't see any problems and I like the way everything is organised, so thanks to you !
I'll make more comments after I've used it for a while.
The splash during... 4 sec, and you don't reboot every days, and you can't deactivate it.
The icons on the 4th side of cube are too big, and not very well, but I'm not a artist.
I'm working on a little application for users to customize icons and program to appear in launcher.
For the contact bug, I'll suppress ContactCM in 1.2 release.
For the 1.2 I'll :
suppress : ContactCM, WMA PhoneProfile, WkTaskL
add : script to launch MortPlayer (activate BT, increase volume... and deactivate BT to exit and restore volume setting)
modify : restore volume setting after exit tomtom
...
Perhaps I'll make possibility to deactivate animated splash.
But, I'm not sure I'll release my future ROM here, because I've not enough comments for progress. I've post my ROM on a french forum, and have a higher audience.
May you give the URL of the french forum you're talking about ?
I'll keep coming on XDA for fresh news about Wifi, GPS or display drivers, but talking about Niki in french would be interesting (and much easier...).
PS : I'll try your ROM soon, at the moment the "original" Bouygues's one suits me since it's my first PDA, I had SFR's one on it before (no comparaison between them...) and I'm still learning
Keep on working on your ROM
I'm not sure moderator accept a link to another forum, but you can search "niki phantom rom" in google.
Thank you very much
hi,
thank you for this ROM, good job.
@+
just a little question: sfr illymitics parameters are inside (sorry for my bad english)??
No SFR illymitics parameters in this ROM.
There is no provider packages in this ROM.
My question is not exactly about the Phantom ROM, but do anybody know a tool which might automatically delete packages from extracted a ROM extracted with the kitchen ? In the Kaiser wiki I've seen some interesting screenshots about it, but there's no such thing in any of the 2 kitchen... And I can't find anything using the Search...
I would be happy not having to remove then manually (I'm lazy...).
Thanks for your help
@Sterbaya : still waiting for you're 1.2 release
comment after test it
very good french rom, it the thread rom tested pon my niki. it work very well.
the slide to unlock is very usefull.
Mortscript and phm regedit are usefull too.
you can do few following improvement on your rom.
- the 4th side of the cube isn't easy to customize without play with the registry. a simple interface will be wellcome.
- PocketCM, is complet, customisable, very funny but, it freeze sometime when you sliding over more than 300 contacts like me.
- activsynch is frozing the system during a synchronisation (i feel is using so much cpu)
- may you can integarte alt-tab or equivalent allowing to switch between application loaded on the memry without close it.
Super ROm, c'est la troiseme que j'essai sur mon dual touch. elle marche tres bien. le slide unlock est super pratique. Mortscript et PHM regedit le sont aussi.
tu peux encore appoter quelques amelioration:
- la quatieme face du cube n'est pas facilement configuration sans jouer avec la registry. un interface graphic serait le bien venu.
- Pocket est complet, configurable, genial mais il se fige un peu lorsque l'on glisse pour cherche parmis plus de 300 contacts
- activsyn se fige uassi pendant les synchronisation ( trop consomateur de CPU je pense)
- tu pourrais integre Alt-tab ou un equivalent permettant de switcher d'une application a l'autre sans les fermer.
j'aurais plaisir a test vos futurs optimisation.
Tu devrais aller voir ma dernière ROM sur win-mobile, elle prend déjà en compte toutes tes remarques :
-Outil intégré pour une configuration de la 4ième face (tuto sur le site web en question)
-PocketCM viré
-Pour switcher entre les application, j'ai mis en place QuickMenu
Par contre, cela fait longtemps que je ne l'ai pas mis à jour (WM6.1 par exemple) et je n'ai pas le temps de m'en occuper dans les prochaines semaines.
You can go on win-mobile website for find the phantom 1.2 with many fix you say :
-A soft for configure the 4th side of cube
-PocketCM removed
-QuickMenu for switch between softs
For moment, I haven't the time to update this ROM.
does it comes with english too? or just french?

[Q] Unlock & Root Evo 3d Failed

Hello all,
I'm sorry but I do not have a good level in English .... Special Thanks to Google (translate)
I have an evo 3d ROM with SFR (it's really the ****) and obviously I try my evo ROOT.
My HBOOT: 1.40.0018
Relocked
I try SEVERAL ways but nothing was done.
With control FASTBOOT (error or failed signing)
SHELL command with the ADB (permision denied)
I managed to deblocker BOOTLOADER with my HTC site.
Here are the links of the first tutorial I try:
http://forum.xda-developers.com/showthread.php?t=1247392
Change the CID
1. Unlock your HTC bootloader with Unlocktoken
2. Change your CID is fastboot
fastboot oem writecid HTC__001
Click to expand...
Click to collapse
I am the [FATAL ERROR]. The post after I said it did not matter.
I continued:
3.Re-Lock your bootloader
fastboot oem lock
[If you Already have europian HBOOT 1.49.0018 CID and you-can pass first two steps ...]
Yes Thats it PG86IMG.zip Now all you need on your SD card.
Download PG86IMG.zip http://www.multiupload.com/39NSAMWQU7 NOTE: it will delete all your internal memory. Before it make flash backup)
4. Put your SD card to your pc PG86IMG.zip copy to your SD card root
5. Power off your phone.
6. Press Vol Down + Power to open HBOOT.
7. Let the device find the zip file and flash it.
8. Chk version of the HBOOT now.
Click to expand...
Click to collapse
Version does not change ..
It takes into account the file PG86IMG but does not work ...
I try SEVERAL root technique but nothing works ..
Help Me! PLEASE
I already root SEVERAL phone, but one that HTC (HTC DESIRE and I had to change the file misc.misc a real sh .....) But I do not understand ..
please help
hi,
I'd really like to know how I can downgrade and root, then installs a costum rom ..
Help me please
psyche699 said:
hi,
I'd really like to know how I can downgrade and root, then installs a costum rom ..
Help me please
Click to expand...
Click to collapse
to unlock, try this,
http://androidforums.com/evo-3d-all...ms-kernels-using-fastboot-updated-4-29-a.html
and to downgrade:
http://forum.xda-developers.com/showthread.php?t=1471246
works great for me.
Salut,
Tu peux aussi te baser sur ce tuto en français
(je n'ai pas encore le droi de poster de liens) en tapant ça dans la recherche google
[TUTO] - S-OFF, S-ON, Recovery et Root
TU tombera sur le forum franais htc dev.
Pour le downgrade en français tape ça dans la recherche google :
[Tuto] Downgrade HBOOT 1.49.0018 et S-OFF pour beaucoup d'entres vous
In English
Thx all,
I'll let you know if it works and of course if its not working ..
In french !!
Merci a vous,
Je vous tiens au courant si ça marche et bien sure si sa ne marche pas .

failed to boot 2 probleme

voila se quil me marque quand je demare en recovery
"Failed to boot 2.
Starting RSD Mode"
Et... rien. Lors que je maintiens volume bas (ou haut d'ailleurs) et POWER, je n'ai pas accès au fastboot, il ne se passe rien, j'ai juste ces deux lignes d'affichées et je ne peux rien faire. merci de maider :crying::crying::crying:
English please.
Sent from that Atrix.
here is that he is me when I mark smith in recovery
"Failed to boot 2.
Starting RSD Mode "
And .. nothing. I maintain that at low volume (high or elsewhere) and POWER, I do not have access to fastboot it nothing happens, I just posted these two lines and I can not do anything. thank you for maider:crying::crying:
I had the same problem, there is a precise step by step fix for the failed to boot 2 error, i got this after using romracer to install cwm recovery = problem.
It even tells you what to do if rsd reaches 100% but doesnt say success or fail.
Unfortunately I'm currently at work and have a wedding reception to go afterwards.
But i will try and find it if no one else can.
There is a fix, but I forgot where, will try and find.
( il ya une solution, mais j'ai oublié où, vais essayer de trouver) :thumbup:
Google translate is my friend.
Sent from my Atrix
Motorola Atrix (MokeeOS v1.10.436)
Nexus 7 (Vanilla root flavour)
I had the same problem when I first tried to unlock the bootloader
http://forum.xda-developers.com/showthread.php?t=1302423
follow this exactly,follow the proper recovery method in the link, don't use any app at this stage to make the recovery, follow the method exactly as mentioned in the link, look carefully at step 9 if you have this problem with RSD and follow exactly,and yes it is in English.
This helped me with my failed to boot 2, this should fix your problem and...... use windows to follow the instructions (sign of cross with my fingers :cyclops: )

List of applications for Android Wear

I'll try to make a list of applications available for Android Wear, ca happens on my blog http://infogeek.eu/les-applications-android-wear/
If you find any apps that I board not yet listed give me the name that I added to the list, thank you.
to make it simple it would be to centralize the response of the topics on global topics Android Apps Wear
http://forum.xda-developers.com/and...droid-wear-t2809102/post53994030#post53994030
http://infogeek.eu/les-applications-android-wear/
UPDATE TO 98 apps - 14/07/2014
If you find any apps that I've forgotten them, give me a link and thank you name. I would add to the list.
Update 159 apps.
If you like my work support me,disables adblock and clicking one time on the top banner of the site. Thank you all
si vous aimez mon travail, désactivez adblock et cliquer juste une fois sur la bannière en haut du site. Merci à tous
Partagez mon blog. Share my blog http://infogeek.eu/

Problem isntall xPosed on bluestacks 0.8.12.3119

Hi
I want to install xPosed on bluestacks 0.8.12.3119 version. I 've downloaded the xPosed installer, then I clicked on and clicked on framework/install/update
I have an error message:
Carte SD:/mnt/sdcard/android/date/de.robv.android.exposed.installer/files
Copy of Xposed-disabler-recovery.zip...
Montage de /system en écriture ( writing I think, sorry the message is in french)
cp: can't create ' /system/bin/apps_process.orig' : Read- only file system
Echec de la création d'une sauvegarde de /system/bin/app_process which I think could be translated in
failure of the backup of /system/bin/app_process
I'm a beginner in this and in xposed so please answer the more precisely you can.
Thank you in advance
haretzi said:
Hi
I want to install xPosed on bluestacks 0.8.12.3119 version. I 've downloaded the xPosed installer, then I clicked on and clicked on framework/install/update
I have an error message:
Carte SD:/mnt/sdcard/android/date/de.robv.android.exposed.installer/files
Copy of Xposed-disabler-recovery.zip...
Montage de /system en écriture ( writing I think, sorry the message is in french)
cp: can't create ' /system/bin/apps_process.orig' : Read- only file system
Echec de la création d'une sauvegarde de /system/bin/app_process which I think could be translated in
failure of the backup of /system/bin/app_process
I'm a beginner in this and in xposed so please answer the more precisely you can.
Thank you in advance
Click to expand...
Click to collapse
is it like this that is my problem too

Categories

Resources