[Kernel][CM][4.4.4][October 22] TinyKernel - One (M7) Original Android Development

This kernel aims to be close to the stock CM11 kernel, only including changes that I feel will benefit performance and battery life. I don't aim for this project to include [insert governor name / feature here] but am open to suggestions.
Changelog
2.3
Synced with CM kernel as of 10/22 (WiFi driver updates - WiFi will only work with more recent CM builds)
Kernel support for F2FS (ramdisk will require changes as well as recovery support to format F2FS)
2.2
Synced with CM kernel as of 8/16 (WiFi driver updates)
Re-enabled multiphase support
2.1
Synced with CM kernel as of 7/11
Reverted ondemand changes back to CM/CAF
Added patches to ondemand to not be as aggressive under light load. This should improve battery by keeping the frequencies down at 384MHz a lot more often
pnpmgr fully disabled and removed.
Added scripts for BLN, toggle USB Force fast charge, and L2M.
Modified updater-script so it should properly flash on Verizon and Sprint now
2.0
Synced with CM kernel as of 6/24
Switched back to CM ondemand governor but added multi-phase support
pnpmgr disabled - it shouldn't be used unless it is properly integrated with the ROM.
logo2menu (has to be enabled manually - please check notes about the keylayout file if you wish to use it)
BLN (disabled by default)
Sprint and Verizon should be supported (injects zImage into existing ramdisk and uses by-name to flash the new boot.img). Please provide feedback, especially on Sprint, as I don't have the device to test
1.0 (Initial Release)
Based on msm8690 kernel as of 6/19 commit
Add and enable multi-phase ondemand governor from HTC
enabled exfat support
patch for possible mmc queue bug - issue described here - https://lkml.org/lkml/2014/1/21/75
Please note I don't currently plan to include sweep2wake/logo2wake features as of right now. They use a method of IRQ wakeup on the touch screen driver that wakes it up every time you touch the screen. While pocket detection helps somewhat with it, it introduces a greater delay in waking up the screen, so I want to avoid that.
Source:
https://github.com/tiny4579/android_kernel_htc_msm8960
(branch: cm-11.0, config: m7_defconfig)
Downloads: (Dev-Host links below. Also available on downloads tab via xda DevDB)
2.3
tinykernel-m7-cm11-2.3.zip - 5.86 MB
2.2
tinykernel-m7-cm11-2.2.zip - 5.73 MB
2.1
tinykernel-m7-cm11-2.1.zip - 5.72 MB
2.0
tinykernel-m7-cm11-2.0.zip - 5.72 MB
1.0
tinykernel-m7-cm11-1.0.zip - 5.72 MB
Additional Info:
Starting with 2.1, I've added scripts for L2M, USB fast charge, and BLN. This should address some concerns about L2M by adding a script to enable it on boot and modify the keylayout file.
It also adds scripts for USB fast charge and BLN. All scripts require busybox and init.d support to apply automatically at boot.
All scripts are run from terminal emulator or adb shell (need to have root acess).
Type su to make sure that you have the root prompt (# instead of $).
USB Fast charge - doesn't stick on reboot
ffc
Enable BLN
bln enable
or
bln on
Disable BLN
bln disable
or
bln off
Enable L2M
l2m enable
or
l2m on
Disable L2M
l2m disable
or
l2m off
XDA:DevDB Information
[Kernel][CM][4.4.4] TinyKernel, Kernel for the HTC One
Contributors
tiny4579
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 2.3
Stable Release Date: 2014-10-22
Created 2014-06-21
Last Updated 2014-10-23

Thanks tiny, I'm sure your kernel is awesome!
Sent from my One using XDA Premium 4 mobile app

Hey I was just wondering if this kernel has CPU overclocking?
Sent from my One using Tapatalk

monkboy24 said:
Hey I was just wondering if this kernel has CPU overclocking?
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Nope, I don't see the need for CPU overclocking. I would like to get gboost working but when I messed with it a while back, I couldn't get the kernel to compile with gboost added in. I don't know the errors offhand.

Didn't you have a kernel for the galaxy nexus?
Sent from my HTC One using XDA Premium 4 mobile app

jeremytn86 said:
Didn't you have a kernel for the galaxy nexus?
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yup. In fact it's posted in the toro section.
Sent from my One using Tapatalk

I thought you were familiar. I had that device, I love that kernel.
Sent from my HTC One using XDA Premium 4 mobile app

Nice to see your kernel here. U are welcome!

Thx Great Thing, I'm curious how evolved the kernel
I've attached this thread in CM11

Does it work on paranoid android?

Sinistersky said:
Does it work on paranoid android?
Click to expand...
Click to collapse
If kernels built for CM do then yes. I don't have time to check every ROM. This was primarily designed for CM and any ROM that uses its kernel source tree.

Sinistersky said:
Does it work on paranoid android?
Click to expand...
Click to collapse
Yes it does, as well as CarbonRom
Sent from my One using XDA Premium 4 mobile app

I might need to make some tweaks. I'm getting occasional stuttering when playing back regular audio.
If anyone is having or not having audio issues, please leave a comment and let me know either way.
Sent from my One using Tapatalk

Hell yeah more kernel for aosp fans. Thanks.
Sent from my One using XDA Premium 4 mobile app

There probably will be an update in the next few days. I'm not fully happy with the current ondemand governor as I'm seeing audio stuttering. Also, I can probably get Sprint support in with an updater-script update.
Sent from my One using Tapatalk

tiny4579 said:
There probably will be an update in the next few days. I'm not fully happy with the current ondemand governor as I'm seeing audio stuttering. Also, I can probably get Sprint support in with an updater-script update.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Maybe to stuttering is caused by the I/O scheduler. I'm not a dev, but that's just how I always fixed it.

tiny4579 said:
There probably will be an update in the next few days. I'm not fully happy with the current ondemand governor as I'm seeing audio stuttering. Also, I can probably get Sprint support in with an updater-script update.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
I modified updater-script to use by-name so the next version will work on on m7 variants.
I may have found a compromise with ondemand, so I'm giving it a whirl for a bit to see how this goes. I took the existing CM ondemand governor and cherry picked the multi-phase stuff I liked from HTC.

tiny4579 said:
I modified updater-script to use by-name so the next version will work on on m7 variants.
I may have found a compromise with ondemand, so I'm giving it a whirl for a bit to see how this goes. I took the existing CM ondemand governor and cherry picked the multi-phase stuff I liked from HTC.
Click to expand...
Click to collapse
Good to know! I'm going to give the kernel a try. Other CM/AOSP kernel seem to disable by ability to use WiFi.
---------- Post added at 08:28 PM ---------- Previous post was at 08:23 PM ----------
@tiny4579 it's definitely nice to see more AOSP Kernels. Looking forward to see how you'll make it progress.

Great kernel , are you planing to add logo2menu at least ?
Looking forward to future updates
Sent from my One using XDA Free mobile app

Great kernel tiny. Keep up the good work. I remember all your fantastic incredikernels from the HTC incredible back in the day. Keep it up.
Sent from my HTC One using XDA Free mobile app

Related

[KERNEL][ICS][3.0.21] KernelSk8 v2.2 (12/12/12)

This is the stock ICS 3.0.21 kernel with some performance and battery enhancements.
Download --------> sk8s-kernel-v2.2-ATTLGOG.zip (use setcpu to select your governor)
- flash in recovery
Features:
- reduce wakelock time (thanks jonasl!)
- battery optimizations
- set your own UV settings
- increased max readahead value
- added interactive and conservative governors
- added optimized AES and SHA1 routines to provide up to a 50% improvement in IPsec/TCP throughout for tunnels using AES128/SHA1 (read here)
- update lzo compression (read here)
- block/deadline: tweaked for better performance on android
- fast_charge on usb (icon will still show as slow charge but it will actually charge faster)
- cpu tweak to enable use of all freqs in high stress times like games and benchmarks
TODO:
- add overclock to 1.836mhz
- increase GPU overclock to 487mhz
- add voltage control via sysfs
- more
Changelog:
Code:
v1:
- initial release
v2:
- added GPU OC and UV settings
v2.1
- revert GPU settings until i get them more stable
- add voltage control via sysfs (use system tuner to select your custom UV settings)
- fix the black screen issue for alot of users
v2.2
- fast_charge on usb (icon will still show as slow charge but it will actually charge faster)
- cpu tweak to enable use of all freqs in high stress times like games and benchmarks
Thanks:
faux123
mathkid95
jonasl
franciscofranco
please report any bugs to me on this thread
source: https://github.com/sk8erwitskil/LGE970_ICS_kernel
Now I need to get myself an LGOG. Thanks for pushing out all of this developmental work!
Good work sk8! No issues so far
I'll report later on battery life. For the benchmark-heads...scored over 19k on Antutu. Stock was between high 17k-18k
Does this work for Sprint or other versions? (Dont wanna brick if I can help it)
Sent from my LG-LS970 using xda app-developers app
What battery optimizations were done?
sk8erwitskil said:
This is the stock ICS 3.0.21 kernel with some performance and battery enhancements.
Download --------> sk8s-kernel-ATTLGOG.zip
- flash in recovery
Features:
- reduce wakelock time (thanks jonasl!)
- battery optimizations
- undervolted -100 mV UV for better battery life
- GPU is overclocked to 450 Mhz
- increased max readahead value
TODO:
- add overclock to 1.836mhz
- increase GPU overclock to 487mhz
- add optimized AES and SHA1 routines to provide up to a 50% improvement in IPsec/TCP throughout for tunnels using AES128/SHA1
- more
Thanks:
faux123
mathkid95
jonasl
please report any bugs to me on this thread
source: https://github.com/sk8erwitskil/LGE970_ICS_kernel
Click to expand...
Click to collapse
Sounds like a great start here. My question is can undervolt be adjusted to- 75 or- 50 or will all of our phones handle the -100?
Sent from my LG-E970 using Xparent ICS Tapatalk 2
I flashed this through TWRP, everything went well it seemed, wiped my caches, rebooted, LG logo popped up and the screen went blank and stayed there. Does anyone have any suggestions?
Sent from my LG-E970 using xda app-developers app
gutterwall said:
Does this work for Sprint or other versions? (Dont wanna brick if I can help it)
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Do not flash on Sprint version! Sprint development will come. I am moving from Sprint to AT&T and I know some Sprint devs have picked up the phone
Sent from my LG-E970 using Xparent ICS Tapatalk 2
you're just on a roll aren't you!!! AWESOME!!
gutterwall said:
Does this work for Sprint or other versions? (Dont wanna brick if I can help it)
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
I want to try this for my E971 soo bad, scared of bricking it tho
BloodBaron said:
I want to try this for my E971 soo bad, scared of bricking it tho
Click to expand...
Click to collapse
Well I am pretty certain you will have no data or phone calling so that will definitely help with battery..Lol..GSM and CDMA are very different.
Sent from my GT-I9300 using Xparent ICS Tapatalk 2
Well I got stuck on blank screen too so might be that it doesn't work with base rom or bad download
Sent from my LG Optimus G
yaooitsbrett said:
I flashed this through TWRP, everything went well it seemed, wiped my caches, rebooted, LG logo popped up and the screen went blank and stayed there. Does anyone have any suggestions?
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
This happened to me also. I shut it down and let it sit for a while than I restored my backup.
Can't think of anything that caused it..
Sent from my LG-E970 using xda premium
Ilkinansr92 said:
Well I got stuck on blank screen too so might be that it doesn't work with base rom or bad download
Sent from my LG Optimus G
Click to expand...
Click to collapse
It worked for me with The Base 0.5 and TWRP.
Did you wipe both Cache and Dalvik-Cache before you flashed?
Deaf Mute said:
It worked for me with The Base 0.5 and TWRP.
Did you wipe both Cache and Dalvik-Cache before you flashed?
Click to expand...
Click to collapse
Sure did
Sent from my LG-E970 using xda app-developers app
Deaf Mute said:
It worked for me with The Base 0.5 and TWRP.
Did you wipe both Cache and Dalvik-Cache before you flashed?
Click to expand...
Click to collapse
Haha yes I did but I assume it might be a bad download as I did it with my phone and not from computer so gonna get home and just fast boot flash it
Sent from my LG Optimus G
I can also confirm that this kernel has been flashed successfully and working on mine which is running the Base .5 and TWRP.
Overclocking this thing scares me now that i read the back glass can break just from heating and cooling. But w/e 9.99 a month to best buy says i can do whatever the hell i want without suffering consequences.
jamesc760 said:
I can also confirm that this kernel has been flashed successfully and working on mine which is running the Base .5 and TWRP.
Click to expand...
Click to collapse
Hmm this is strange as i just flashed through fastboot and still have the black screen issue i wonder what is the difference between our phones. Gonna back up the rom and clear data also i guess
Flashible Stock Kernel if anyone need it http://www.mediafire.com/?7j950wb5hes2x9b
I have a blank screen, too. I played around with the boot.img a few days ago and had the some problem. It only happens if I edit the ramdisk. I am on stock ROM. I will flash base and see if it helps.

[KERNEL][AOSP] Funky Kernel v4.2

Built straight from HTC source 3.0.16 with 3.0.101 upstreamed
Added Added ic3man5's SuperCharge
Added Showp1984's kernel based mpdecision with sysfs interface, here is a guide on explaing the settings
Added DanceDance Lazy Lagfree Intellidemand & Wheatley Governors
Added SIO Scheduler & V(R) Scheduler
Added CIFS Module use CIFS Manager or follow this guide to get shares to mount
If you're building based off my source please use the toolchains located at: https://github.com/VigorCM9/linaro_4.8
Must Read: To install any of my kernels confirm you are getting boot with your current kernel. Only wipe cache/dalvik after flash. If your device finds an issue/random reboot/freeze, please post the issue and what you were doing at the time. Please use TWRP 2.4.0.0+
Current version: 4.2
Downloads! (current versions)
Older versions:
Android Filehost Box (versions 1.5 - 3.1)
Rom & Kernel Download Page!!!(Older versions 1.5>)
Officially Unofficial Mascot Bootanimation! Aosp only
-Flash in recovery
(Thank you Synisterwolf)
Use my kernel scripts package if you wish to change it's defaults or to uninstall them prior to flashing a different kernel:
Kernel Scripts download
These will work on all branches.
Credits & Thank you!!!
Intervigilium (for the 3.0.42 upstream)
Wildstang83 (for answering the few questions I had & always being there to help)
Chad0989 (for bringing us AOSP, without him I would never had brought the AOSP port online)
MaulingDeOso (for being him and helping with a few things)
DSB9938 (for his kernel knowledge & allowing me to pull some commits -reading and watching his github account to learn a couple things)
SebastianFM (for his kernel knowledge as well -really awesome dev I might add)
v4npro (for being a sponsor and donating the server)
vinylfreak (for the awesome hboot & video fix found in my sense 4 & global ports)
con247 (for the scripts utilized in the alternate installers)
iHateWebOS (for just being plain awesome!)
CharliesTheMan (beta tester)
Faux123 Showp1984 & MikeC84
Thank you Iamtheonetheycallneo, Izzaeroth, tjarvis, & apophis9283 for providiing motivation!!!!
My Sense kernel github repo
My AOSP ported kernel github repo
Donations accepted but not expected!​
Changelog
FunkyBean Changelog:
JB PMEM Kernel downloads
Full changelog
FunkyNeon Changelog:
JB ION Kernel downloads
Full changelog
Jellybean Copy.com Mirror
Funky ICS Changelog:
ICS Kernel downloads
Full changelog
ICS Copy.com Mirror
v4.2
Reverted back to 3.8 series clockrate source
Added CWM S-On Compatibility​
v4.1
Version number jump: double checked/re-enabled GPU Overclock
Upstreamed to 3.0.101​
v4.0
Revert "Faster scaling through lower end clocks"​
v3.9
Added Force fast charge v2 by chad0989
Upstreamed to 3.0.95
Updated min clock rates
Screen off should now sleep the gpu even better​
Upstream changelog's can be found here: www.kernel.org
Old Changelog & Links
Use my kernel scripts package if you wish to change it's defaults or to uninstall them prior to flashing a different kernel:
Kernel Scripts download
These will work on all branches.
First. Thanks snuzzo for updating funky kernel aosp version!
Sent from my Rezound using xda app-developers app
Reserved
Sent from my ADR6425LVW using xda premium
Have my babies?
Sent from my SCH-I535 using xda premium
Yessss!!
Sent from my Nexus 7 using Tapatalk 2
Let me know if you guys have prox sensor issues.
Funkybean ftw!! Can't wait to let this puppy sit overnight! Thanks for your hard work, buddy!
Sent from my Rezound using Tapatalk 2
I might have found something. It appears the lowest voltage possible is 800mV.
Sent from my Rezound using xda app-developers app
jon7701 said:
I might have found something. It appears the lowest voltage possible is 800mV.
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
I'll fix that later enjoy for now, Don't want to cut majorly into stability just yet.
Alright for now I guess I'll leave my phones min frequency at 700 MHz since that is equivalent to the power consumption of everything below it lol.
Sent from my Rezound using xda app-developers app
just flashed but the kernel version is 3.0.16 not upstreamed to 3.0.42,did i download the wrong file?
Sent from my Rezound using xda premium
live2die said:
just flashed but the kernel version is 3.0.16 not upstreamed to 3.0.42,did i download the wrong file?
Sent from my Rezound using xda premium
Click to expand...
Click to collapse
Nope he probably just hasn't updated that yet.
Sent from my Rezound using xda app-developers app
Just flashed this. Seems video recording and hd still broken in your kernel as well...
And what is dance dance I can't find any info on it... Thanks
I am assuming that this kernel is safe for cm9 builds and cm10?
Thanks in advance.
Sent from my ADR6425LVW using Tapatalk 2
DreamFX said:
Just flashed this. Seems video recording and hd still broken in your kernel as well...
And what is dance dance I can't find any info on it... Thanks
Click to expand...
Click to collapse
The governor is my own creation. As far as video, this is based off Chads source, I figured no sense of trying to "re-invent" the wheel.
mystiquefbsd said:
I am assuming that this kernel is safe for cm9 builds and cm10?
Thanks in advance.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Download the one you need for the type of rom you are planning on running.
@live2die
Hey buddy, I haven't did any upstream yet. One of the things that will be done later. Also it barely effects anything.
Sent from my HTC Rezound using Xparent ICS Tapatalk 2
@jon771
What are you using to UV?
mystiquefbsd said:
@jon771
What are you using to UV?
Click to expand...
Click to collapse
Which bring me to mention, PLEASE USE ANDROID TUNER FROM NOW ON OR RUN INIT.D SCRIPTS FOR EVERYTHING!
Is dance dance good for someone like me who had tons of screen time? I really liked lazy governor.
DreamFX said:
Is dance dance good for someone like me who had tons of screen time? I really liked lazy governor.
Click to expand...
Click to collapse
It's in between wheatley and intellidemand. Where intellidemand gives you great graphics performance this gives you more performance out of the 2nd core, with a few mpdecision adjustments in the new sysfs interface it could turn out to be better than intellidemand with its deep sleep routines similar to Wheatley.

[KERNEL][4.1.2]B18c1[UPDATED 07-31][CFX-ToolChain]

I would like to bless the LG-E970 users with a kernel for your device. This kernel has many enhancements.
Read Carefully
I am in no way shape or form responsible for bricking your device. You're flashing this product at your own will. If you point your finger and try to blame me I will laugh and enjoy my beer.
Requirements
You must have your bootloader unlocked via FreeGee
Running any 4.1.2 rom - Only tested on SnowJB how ever.
Main Features
Init.D Support
FauxSound Control Support. App must be purchased in the play store - FauxSound
Faux Speaker Loudness & Amp Control Support. App must be purchased in the play store - FauxSpeaker
OverClock and VoltageControl can be controled with kernel tuner, system tuner, or faux clock READ 2ND POST!!!!!!!!
GPU OverClock to 487mhz - So far only faux clock works to set GPU correctly. The GPU is overclocked by default.
192 & 288mhz Frequencies ( Default at 384mhz )
.
Installation
1) Download Kernel
2) Boot into recovery
3) Backup existing rom
4) Install zip from sd-card
Change Log
Check github for full change-logs
Code:
[B]Initial Release[/B]
Faux Sound - ( Faux123 )
Faux Speaker - ( Faux123 )
SIO Scheduler
SIO Scheduler Set As Default
USB Fast Charge - ( Sk8erwitskil )
Max Read-Ahead
Raised Touch Sensitivity
Updated LZO Compression - ( Faux123 )
Added Optimized AES And SHA1 Routines - ( Faux123 )
[B]03-25[/B] - v2
Voltage Control - ( Faux123 )
Over Clocked
[B]04-01[/B] - V3
Fixed Memory Leaks
Set Default Max Frequency back to 1.5ghz
Updated GPU Drivers
GPU OverClocked - (Faux123)
Compiled With 4.7 ToolChain
[B]04-03[/B] - v3.1
New Boot Splash - ( Octhrope )
Arm9 Optimized
Gamma Tweaked
Source Is Now on Github
Removed Un-Necessary Zip From Meta-Inf - ( SnowLeopardJB )
[B]04-10[/B] - v3.2
More Optimizations
Wheately Governor
[B]4-12[/B] - v4
More Core Optimizations
Disabled Un-Needed Cpu Frequencies
Fixed More Memory Leaks
Tweaked SIO
Added Fsync Switch Support
GPU Tweaks
Added 192mhz & 288mhz Cpu Speeds ( defaulted at 384 )
[B]4-16[/B] - v4.1
Core optimization
Added V(R) scheduler
Aded Zen scheduler
Re-enabled missing clocks ( should fix those that phones would crash )
Compiled with CFX 4.7.3 toolchain
[B]05-08[/B] -v5.0
Now based off of v20j AT&T ota (should resolve the damned BSOD issue the handfull of y'all had)
Added Lionheart governor
Added BaddAss governor
Some more core optimizations
Now can be overclocked to 1.72ghz
[B]05-10[/B] -v5.1
Added back Faux speaker
Updated Faux Sound
Added FIOPS scheduler
Added Smartmax Governor
Added Dancedance Governor
[B]05-10[/B] -v5.1.1
Enabled Faux Sound
Added ROW scheduler
[B]06-04[/B] -v5.2
More core optimizations
Updated kernel source to 3.4.47
Added back boot-splash as requested
[B]06-10[/B] -v5.3
More core optimizations
Updated kernel source to 3.4.48
Faux gamma control
USB fast charge
[B]6-25[/B] -v6
More core optimizations
Updated kernel source to 3.4.50
Made vfgs-cache pressure configurable
Added dynamic fsync
[B]07-01[/B] -v6.0.1
Enabled SHA1 and AES ( forgot to do it on the rebase )
[B]07-26[/B] -v6.0.2
Tweaked L2 Cache
Remove unused MEDIA_TUNER option
[B]07-31[/B] -v6.1.
Added 1.8ghz Overclock
Tweaked L2 Again
Voltage boost
Updated kernel to 3.4.51
Restored norm n fast voltages to defaualt
Credits
Faux123 - for some of the best kernel enhancements android has ever seen
Sk8erwitskil - for his flashing package and USB fast charge
ShabbyPenguin - for being a friend and helping me along the way
SnowLeopardJB - for his kernel source and helping me to compile this kernel
XboxFanJ - for figuring out what i was doing wrong when packing the boot.img
Octhrope - boot splash screen image
Evolutionmods - Optimizations
Houst0n - for helping out
Synergy - for his tool chain
If I've used something of yours or you've contributed in any way and I've not added your name above, I apologize! Please send me a PM and I'll get you added as soon as possible.
Downloads
Kernel - attached at the bottom for now
Source
Donations
Any productions by me are not, and will never be donation ware. However, I have put many hours into the development of this kernel, and will continue to do so for the foreseeable future. Your generosity - if you feel like showing it - is deeply appreciated. I do how ever ask that you hit the thanks button.
OverClock & UnderVolt​Over clock and Under volt at your own risk. not every device and chipset are the same. what works might not work for others. I will not be supporting oc/uv any further. Dont ask for a higher overclock. Are chipset has the coding for 1.7ghz and all i did was enable it. This dosnt mean its safe to do so. If you expirence any problems with with oc/uv return your phone to stock settings. I will not help you any further.
MysteryEmotionz said:
reserved
Click to expand...
Click to collapse
all mine
Re: [KERNEL][4.1.2]B18c1
Great work, brother. I'll be testing shortly. Glad to have you on board!
Sent from my Optimus G using xda app-developers app
Been waiting for this. Thanks a bunch. Testing today
Re: [KERNEL][4.1.2]B18c1
Running. Everything looks good. Any battery improvements?
Sent from my LG-E970 using xda app-developers app
Re: [KERNEL][4.1.2]B18c1
Jank4AU said:
Great work, brother. I'll be testing shortly. Glad to have you on board!
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
Ty. This I'd just the beginning
nygfan760 said:
Been waiting for this. Thanks a bunch. Testing today
Click to expand...
Click to collapse
Your welcome
abraxo said:
Running. Everything looks good. Any battery improvements?
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Changes r in the changelog
Sent from my LG-E970 using Tapatalk 2
i flashed this kernel on my samsung admore and it wont turn on, help me please!!!!
Re: [KERNEL][4.1.2]B18c1
shabbypenguin said:
i flashed this kernel on my samsung admore and it wont turn on, help me please!!!!
Click to expand...
Click to collapse
Lmao
Sent from my LG-E970 using Tapatalk 2
Re: [KERNEL][4.1.2]B18c1
Wish I was on snowjb to try this jernel but I had way to many sods it would do it 5 times a day. Nice work though
Sent from my LG-E970 using xda premium
Re: [KERNEL][4.1.2]B18c1
Dsmforlife92 said:
Wish I was on snowjb to try this jernel but I had way to many sods it would do it 5 times a day. Nice work though
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
Have you tried raising you min frequency?
Sent from my LG-E970 using Tapatalk 2
Re: [KERNEL][4.1.2]B18c1
MysteryEmotionz said:
Have you tried raising you min frequency?
Sent from my LG-E970 using Tapatalk 2
Click to expand...
Click to collapse
No I will flash back to snows and flash your kernel and raise frequency and see if that fixes my issue.
Sent from my LG-E970 using xda premium
Re: [KERNEL][4.1.2]B18c1
Dsmforlife92 said:
No I will flash back to snows and flash your kernel and raise frequency and see if that fixes my issue.
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
Make sure to do a clean install. When flashing the only data I restore is games.
Sent from my LG-E970 using Tapatalk 2
Re: [KERNEL][4.1.2]B18c1
Hey can u make a kernel for CFX rom =P
Sent from my At&t LG Optimus G E970 running CFX
Re: [KERNEL][4.1.2]B18c1
Ilkinansr92 said:
Hey can u make a kernel for CFX rom =P
Sent from my At&t LG Optimus G E970 running CFX
Click to expand...
Click to collapse
I can n will when they get everything working. There's no point of me to build a kernel when there still updating it. Allot of tweaks are sideway found in cfx. You may have better results by asking him to include the faux sound enhancements
Sent from my LG-E970 using Tapatalk 2
Re: [KERNEL][4.1.2]B18c1
Kernel seems to be working very well. Faux sound is amazing just saying. Thanks!
Sent from my LG-E970 using xda premium
Re: [KERNEL][4.1.2]B18c1
Strange...I've downloaded this twice, yet it can't be found on my phone anywhere.
Sent from my LG-E970 using Tapatalk 2
Re: [KERNEL][4.1.2]B18c1
Kernel is working great so far, love the sound mods thanks. No sods so far but if I do I will change voltage a little. Great work but one question is there any way to get the hard keys to light up when touching screen.
Sent from my LG-E970 using xda premium
Re: [KERNEL][4.1.2]B18c1
powerwagon said:
Strange...I've downloaded this twice, yet it can't be found on my phone anywhere.
Sent from my LG-E970 using Tapatalk 2
Click to expand...
Click to collapse
Check sdcard/xdadownloads
Sent from my LG-E970 using xda premium
Re: [KERNEL][4.1.2]B18c1
ChefAnt said:
Kernel seems to be working very well. Faux sound is amazing just saying. Thanks!
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
Your welcome
Dsmforlife92 said:
Kernel is working great so far, love the sound mods thanks. No sods so far but if I do I will change voltage a little. Great work but one question is there any way to get the hard keys to light up when touching screen.
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
Glad to here that. I how all is well.
I haven't looked into the keys. I turn them off n use the soft keys. How ever of you goto settings/display/front key lights n turn them on to always they will stay on the hole time the screen is on n turn off with screen
Sent from my LG-E970 using Tapatalk 2

[KERNEL][flo]Tinykernel - Updated 9/27/13

*NOTE* I have switched the kernel base to CM's from stock so it can properly support the CM ROM. This will mean dated releases instead of the numbered releases. It also means that it's possible that it won't work with older CM builds and may not work properly with stock at all. Sorry for any inconvenience. I will try to stay on top of CM's kernel changes as much as I can and will update when I see an update on their end or when adding new features.
Code:
/* NON-STANDARD DISCLAIMER:
I understand that if I disable fsync I am liable for any possible data corruption that could result. While dynamic fsync has been added, there is still the risk of data corruption.
*/
NOTE: Remember this is beta and it may not work on everyone's device
Changelog:
09/27/2013
latest kernel merges from CM (for best results, you should be on the 9/26 build or later
GPU OC to 450MHz (currently not selectable)
Faux123 Sound Control
User Voltage Control
Kexec-hardboot support (for Multi-ROM)
Battery gauge driver enhancements from tni.andro
USB fast charge support
09/13/2013
S2W/S2S and DT2W off by default
enhanced Simple GPU governor
cgroups: timer_slack: forward port timer_slack to 3.4. http://lwn.net/Articles/431847/
adjust sweep2wake, suppress if more than one finger down
Makefile adjustments
Add shortsweep option
rework s2w and dt2w, now we're getting somewhere
fix for app-mounted directories (thanks @mkasick)
sweep2wake/doubletap2wake adjustments
update ARM topology and add cpu_power driver
Makefile optimizations
switch: do_fsync() to fget_light()
Sweep2wake and Doubletap2wake for the Nexus 7 (flo)
arm optimized crypto algorithms
use glibc memcpy and libstr
add intellidemand governor
add /dev/frandom
fiops and sio schedulers
Linaro 4.8 fixes
synced with CM's kernel/google/msm kernel
Downloads:
http://goo.im/devs/tiny4579/flo/kernels
mirror broken right now
Mirror (thanks MBQ_ for hosting space):
http://mbqonxda.net/tiny4579/flo/kernels
You can help MBQ_ with hosting costs by donating to him.
Source:
https://github.com/tiny4579/tinykernel-flo
cm-10.2 branch for Android 4.3
Installation Instructions:
1. (Optional) wipe dalvik+cache.
2. Flash in recovery
Anything special? Or just unsecure? Any governors?
And appreciated.
sent from the 7th nexus of 2013
good lookin out, just flashed & booted up fine. Will experiment with it for a bit
teh roxxorz said:
Anything special? Or just unsecure? Any governors?
And appreciated.
sent from the 7th nexus of 2013
Click to expand...
Click to collapse
A few tweaks for now. Overclocking and voltage control. I also added the simple GPU governor.
It's a zimage kernel so if you wanted insecure you'd need to flash that one first before this one.
Sent from my Nexus 7 using Tapatalk 4 Beta
tiny4579 said:
A few tweaks for now. Overclocking and voltage control. I also added the simple GPU governor.
It's a zimage kernel so if you wanted insecure you'd need to flash that one first before this one.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ahhh, sweet. Appreciate it.
sent from the 7th nexus of 2013
Download link bad
Sent from my Nexus 7 using xda app-developers app
plh233391 said:
Download link bad
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
works fine here.
drdrewdown said:
works fine here.
Click to expand...
Click to collapse
Are you downloading from computer or tablet? Cause on chrome and opera from the tablet I get 404 error
Sent from my Nexus 7 using xda app-developers app
plh233391 said:
Are you downloading from computer or tablet? Cause on chrome and opera from the tablet I get 404 error
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
pc, i uploaded to dropbox for you http://db.tt/qGyWyzIn
Request desktop site if your having issues finding the link
Sent from my Nexus 7 using xda app-developers app
Working great so far!
Sent from my Nexus 7 2.0
Going to guess the preferred method of adjusting options is via TricksterMod for now?
Hey tiny!
Tiny, ran your stuff on my gnex, glad to give this a shot!
Sent from my SCH-I545 using Tapatalk 4 Beta
Nice I undervolted everything by 100mw and over clock to max speed and running stable.
Sent from my Nexus 10 using xda app-developers app
USB-OTG?
How's the kernel? Any good? Worth flashing? Features?
Sent from my XT907 using xda app-developers app
Tiny is the reason I can still use my old incredible. I'll try this as soon as my N7 gets here.
Sent from my Nexus 7
Thanks for the kernel, working perfectly thus far.
DJBBOX said:
USB-OTG?
Click to expand...
Click to collapse
At some point probably. I just wanted a basic feature set and release something that has some benefits over stock.
Malvarose said:
How's the kernel? Any good? Worth flashing? Features?
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Since this a beta I didn't post a change log. Read my post on the previous page or check my github.
Sent from my HTC One using Tapatalk 2

|KERNEL| JediKernel G3 | 3.0 | 09-04-2015 |

JediKernel ​This kernel is compatible with AOSP 5.1.1. This will not work on Stock based ROMs. Until I have a chance to finish my own kernel control app, I recommend TricksterMod​
READ, READ, READ before downloading, flashing, or posting questions
***Not all phones are created equal meaning some phones will not handle Overclocking / Underclocking or Undervolting as well as others.***
Features
OC to 2.80 GHz
Linux Kernel Version 3.4.108
Advanced Power Emulation
Default boot set to 2.26Ghz
Voltage Control
GPU max freq 657 Mhz
Built using arm 4.8 toolchain
AnyKernel Flash Template
Init.d Enabled
Fast Charge
More...
Github
In my GITHUB you can find my sources and code changes
Credits
777jon for a huge Linux Kernel Version commit and for the AnyKernel template
Imoseyon
Fechinator
Faux123
Yank555.lu
Authorship is always retained in my Repos. Please see my git for commit author
Instructions
-Download Kernel zip
-Flash Kernel
-Reboot system
Changelog
Code:
09|04|2015 --
Added BFQ i/o scheduler
set VM_MAX_READAHEAD to 1024
Added VR i/o scheduler
Deadline i/o scheduler tweaked for better performance
Added Simple i/o scheduler
Added Zen i/o scheduler
Fast charge expirimentation -- added more steps to the charging levels
08|28|2015 --
Linux Kernel version upgraded to 3.4.108
Fast Charge ported to G3
*** One of my testers has identified an issue while setting simple_ondemand GPU gov. Avoid this gov for now
08|20|2015 -- New flash package to work on any ROM!
-- Init.d enabled
08|10|2015 -- Initial Release (See Features List)
Downloads
JediKernel 3.0 --- https://www.androidfilehost.com/?fid=24052804347808177
Support this Development by clicking the link below --- Thank you
http://forum.xda-developers.com/donatetome.php?u=4488450
http://forum.xda-developers.com/donatetome.php?u=4488450
Guide to Thread Participation:
Generally speaking, we are a pretty calm group of people, but as with so many other things in life, there are those that evoke a negative response from the very start. THAT is why we are such believers in maintaining a polite, respectful thread. Most everyone here is eager to help, and the only thing we ask is (despite the associated tedium) read the entire thread, it can only help. If and when you are still stuck, feel free to ask questions, we're all here to help one another.
--TMobTim
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
XDA:DevDB Information
|KERNEL| JediKernel G3 | 3.0 | 09-04-2015 |, Kernel for the Verizon LG G3
Contributors
ptmr3
Kernel Special Features:
Version Information
Status: Stable
Created 2015-08-22
Last Updated 2015-09-04
saved
Nice! Always awesome to see more kernels around. Going to try this one out and will letcha all know what I think within the next day or two. :good:
Thanks for the G3 love!
Might check it out later on.
Sent from my LG-VS985 using Tapatalk
Awesome, let me know what you think guys
Sent from my LG-D850 using XDA Free mobile app
This is mine thanks ptmr3
Hey mate
I've tested your kernel against RR 5.0 for vzw but I just can't seem to figure one thing. The scrolling lag
Ive tried every single setting there is to improve scrolling kernel related and flashed a fair amount of roms to test this but it just doesn't work out.
The scrolling lags on most apps I use. This kernel is absolutely better than the others ive tried but it just doesn't diminish this factor altogether.
What am I doing wrong? Is it something we have to live with cause I desperately need some CM love but this holds me back
nagi_007pk said:
Hey mate
I've tested your kernel against RR 5.0 for vzw but I just can't seem to figure one thing. The scrolling lag
Ive tried every single setting there is to improve scrolling kernel related and flashed a fair amount of roms to test this but it just doesn't work out.
The scrolling lags on most apps I use. This kernel is absolutely better than the others ive tried but it just doesn't diminish this factor altogether.
What am I doing wrong? Is it something we have to live with cause I desperately need some CM love but this holds me back
Click to expand...
Click to collapse
What roms are you using and which apps do you see scroll lag in? I'll see if I can work with it
Sent from my LG-D850 using XDA Free mobile app
Excellent job @ptmr3
Thanks for your continued contribution.
psycho4us4 said:
Excellent job @ptmr3
Thanks for your continued contribution.
Click to expand...
Click to collapse
Hey man long time no see! Thanks, just the beginning
Sent from my LG-D850 using XDA Free mobile app
Will this work with cm 12.1
Sent from my LG-VS985 using XDA Free mobile app
bossofindy said:
Will this work with cm 12.1
Sent from my LG-VS985 using XDA Free mobile app
Click to expand...
Click to collapse
Absolutely
Sent from my LG-D850 using XDA Free mobile app
Qi charging
ptmr3 said:
Absolutely
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
Any idea why Qi charging works on stock but not on AOSP for the VS985? Does the kernel have to do anything with it?
Working very well with cm12.1
Nice to see you supporting this device Bro. Always been a fan of Jedi, good stuff.
Sir-Lancelot said:
Nice to see you supporting this device Bro. Always been a fan of Jedi, good stuff.
Click to expand...
Click to collapse
Good to see you man, long time no see.
Sent from my LG-D850 using XDA Free mobile app
rob0809 said:
Any idea why Qi charging works on stock but not on AOSP for the VS985? Does the kernel have to do anything with it?
Click to expand...
Click to collapse
It may, I'll look into it
Sent from my LG-D850 using XDA Free mobile app
Great job man
smartguy044 said:
Great job man
Click to expand...
Click to collapse
Thank you sir, liking it so far?
Sent from my LG-D850 using XDA Free mobile app

Categories

Resources