Is it possible to remove or freeze (with Titanium Backup) the stock soft key bar (soft Home and back buttons)?
Atise said:
Is it possible to remove or freeze (with Titanium Backup) the stock soft key bar (soft Home and back buttons)?
Click to expand...
Click to collapse
Root + Auto Hide Soft Key + Pie Control = Great!
Atise said:
Is it possible to remove or freeze (with Titanium Backup) the stock soft key bar (soft Home and back buttons)?
Click to expand...
Click to collapse
Root. Install xposed framework. Reboot. install gravitybox from the download menu inside xposed installer app. Tick box to enable gravity box in the modules section of the xposed installer app. Reboot. (Do not download gravity box for the kit Kat version by the way) go to pie controls menu inside gravity box app, enable pie to always on, set size etc of controls you like, do not tick disable nav buttons in this menu. In navigation bar tweaks menu in gravity box app tick master switch to on. Make sure nav bar enabled is unticked. Reboot. Nav bar should now be gone and pie controls enabled. I have my pie controls set to work from the left or right side of tablet....good luck
conan1600 said:
Root. Install xposed framework. Reboot. install gravitybox from the download menu inside xposed installer app. Tick box to enable gravity box in the modules section of the xposed installer app. Reboot. (Do not download gravity box for the kit Kat version by the way) go to pie controls menu inside gravity box app, enable pie to always on, set size etc of controls you like, do not tick disable nav buttons in this menu. In navigation bar tweaks menu in gravity box app tick master switch to on. Make sure nav bar enabled is unticked. Reboot. Nav bar should now be gone and pie controls enabled. I have my pie controls set to work from the left or right side of tablet....good luck
Click to expand...
Click to collapse
I can't install any GravityBox version on kindle fire, it is incompatible...
bass_waver said:
I can't install any GravityBox version on kindle fire, it is incompatible...
Click to expand...
Click to collapse
GravityBox works on FireOS although not all features are compatible due to Amazon customizations. Make sure you are trying to install the correct package:
- FireOS v3.x = Jelly Bean (JB)
- FireOS v4.x = KitKat (KK)
Also try Phab7 (Xposed module) although I suspect that will NOT work with FireOS.
Davey126 said:
GravityBox works on FireOS although not all features are compatible due to Amazon customizations. Make sure you are trying to install the correct package:
- FireOS v3.x = Jelly Bean (JB)
- FireOS v4.x = KitKat (KK)
Also try Phab7 (Xposed module) although I suspect that will NOT work with FireOS.
Click to expand...
Click to collapse
I am not having particular issues when using the module, the package cannot be installed as it is incompatible.
Running FireOS 5.x
bass_waver said:
I am not having particular issues when using the module, the package cannot be installed as it is incompatible.
Running FireOS 5.x
Click to expand...
Click to collapse
So you're running the 'developer preview' of FireOS 5 and looking for UI tweaks? Seriously?
Davey126 said:
So you're running the 'developer preview' of FireOS 5 and looking for UI tweaks? Seriously?
Click to expand...
Click to collapse
I apologize, I meant to type 7.x I am not using 5.x
bass_waver said:
I apologize, I meant to type 7.x I am not using 5.x
Click to expand...
Click to collapse
I have no idea what you're talking about. Returning from the future?
bass_waver said:
I apologize, I meant to type 7.x I am not using 5.x
Click to expand...
Click to collapse
Sounds like you're in the wrong forum.
http://forum.xda-developers.com/kindle-fire-hd
Related
Hello guys today i am going to share a trick with you guys on how to Auto-Hide you on screen touch buttons which sometimes annoys us and takes some part of the screen
THIS WORKS ON ALL ANDROID ONE DEVICES
NOTE: THIS REQUIRES ROOT
STEPS: AFTER ROOTING (THOSE WHO HAVE GRAVITY BOX INSTALLED PLEASE FOLLOW FROM STEP 5
1) First Install Wanam Kit Xposed from Play Store and then open it, it will then ask you to install Xposed modules just install it and it open xposed installer ,
2) Now in xposed click on framework which will be in red and inside that click on install/update(JUST IGNORE THE POPUPS), Now reboot your device it will activate xposed now
3) Again go in xposed and then go in download and search Gravity Box KK, Now install it and don't open it just go in xposed and then in modules and then click on gravity box kk (IGNORE WANAM KIT) and reboot your device
4) Now go in gravity box and open Navigation bar tweaks and turn on master switch and check- enable navigation bar then reboot your device
5) now download GMD auto hide soft keys from play store its free, open it and activate it in top right corner of the app
6) now follow the gravity box screen shot below and keep the navigation bar settings as mentioned, this will hide your on screen soft keys and now you can see a red line from auto hide soft keys which you can touch or swipe to bring it up and send it back anytime..
Video tutorial : THIS IS THE TRICK WHICH I DISCOVERED TO AUTO HIDE ANDROID ONE DEVICE SOFT KEYS, BECAUSE ALL AUTO HIDE SOFTWARE WORKS ON NEXUS 5 AND ABOVE DEVICES BUT NOW YOU CAN ON UR ANDROID ONE DEVICES
ENJOY GUYS ITS SIMPLE IF YOU HAVE GRAVITY BOX INSTALLED OR ELSE FOLLOW THE ABOVE STEPS TO INSTALL GRAVITY BOX
PLEASE COMMENT BELOW SO I CAN HELP YOU MORE
THANK YOU...........
ruhez said:
Hello guys today i am going to share a trick with you guys on how to Auto-Hide you on screen touch buttons which sometimes annoys us and takes some part of the screen
THIS WORKS ON ALL ANDROID ONE DEVICES
NOTE: THIS REQUIRES ROOT
STEPS: AFTER ROOTING (THOSE WHO HAVE GRAVITY BOX INSTALLED PLEASE FOLLOW FROM STEP 5
1) First Install Wanam Kit Xposed from Play Store and then open it, it will then ask you to install Xposed modules just install it and it open xposed installer ,
2) Now in xposed click on framework which will be in red and inside that click on install/update(JUST IGNORE THE POPUPS), Now reboot your device it will activate xposed now
3) Again go in xposed and then go in download and search Gravity Box KK, Now install it and don't open it just go in xposed and then in modules and then click on gravity box kk (IGNORE WANAM KIT) and reboot your device
4) Now go in gravity box and open Navigation bar tweaks and turn on master switch and check- enable navigation bar then reboot your device
5) now download GMD auto hide soft keys from play store its free, open it and activate it in top right corner of the app
6) now follow the gravity box screen shot below and keep the navigation bar settings as mentioned, this will hide your on screen soft keys and now you can see a red line from auto hide soft keys which you can touch or swipe to bring it up and send it back anytime..
Video tutorial :
THIS IS THE TRICK WHICH I DISCOVERED TO AUTO HIDE ANDROID ONE DEVICE SOFT KEYS, BECAUSE ALL AUTO HIDE SOFTWARE WORKS ON NEXUS 5 AND ABOVE DEVICES BUT NOW YOU CAN ON UR ANDROID ONE DEVICES
ENJOY GUYS ITS SIMPLE IF YOU HAVE GRAVITY BOX INSTALLED OR ELSE FOLLOW THE ABOVE STEPS TO INSTALL GRAVITY BOX
PLEASE COMMENT BELOW SO I CAN HELP YOU MORE
THANK YOU...........
Click to expand...
Click to collapse
How to remove this setting. When i am disabling gmd app then my previous soft keys are not coming back. Even after restarting.
It tries to load the framework and then it says Gravitybox has stopped working, it will close now.
The same problem as here:
http://forum.xda-developers.com/showthread.php?t=2529641
That fix didn't work for me.
Doesn't work on stock ROM
Sent from my Pixel C using Tapatalk
xposed and gravitybox also work sin stock rom.
use xposed v 82 sdk 32
and before you flash it use selinuxmodechanger.
you also can read it on the xposed thread.
xposed needs permissive selinux mode
and our kernel has enforcing mode. thats why it dont work
I have Xposed already installed.
skeleton1911 said:
xposed and gravitybox also work sin stock rom.
use xposed v 82 sdk 32
and before you flash it use selinuxmodechanger.
you also can read it on the xposed thread.
xposed needs permissive selinux mode
and our kernel has enforcing mode. thats why it dont work
Click to expand...
Click to collapse
Hi
Rooted stock rom.
From the official xposed xda page, I installed xposed installer, then flashed framework sdk23 (marshmallow), arm64 v84.
Xposed says 'not compatible with sdk version 23 or your processor architecture (arm64-v8a)'.
Is it the selinuxmodechanger that i haven't installed (yet) or will v84 not work anyway?
arlrb said:
Hi
Rooted stock rom.
From the official xposed xda page, I installed xposed installer, then flashed framework sdk23 (marshmallow), arm64 v84.
Xposed says 'not compatible with sdk version 23 or your processor architecture (arm64-v8a)'.
Is it the selinuxmodechanger that i haven't installed (yet) or will v84 not work anyway?
Click to expand...
Click to collapse
You're using the wrong version of xposed installer, you need v3.0-beta4.
Jonny said:
You're using the wrong version of xposed installer, you need v3.0-beta4.
Click to expand...
Click to collapse
Thank you, Jonny.
In case anyone else runs into this problem, it's the material design version by DVDandroid.
If you have any other version already installed, uninstall it first.
arlrb said:
Thank you, Jonny.
In case anyone else runs into this problem, it's the material design version by DVDandroid.
If you have any other version already installed, uninstall it first.
Click to expand...
Click to collapse
So, you downloaded the app and clicked on INSTALL/UPDATE with framework "xposed-v84-sdk23-amd64" and that's it?
xposed Qs
llucax said:
So, you downloaded the app and clicked on INSTALL/UPDATE with framework "xposed-v84-sdk23-arm64" and that's it?
Click to expand...
Click to collapse
Yes, that was it. It will auto-shutdown & auto-flash in TWRP, then restart & it should be done.
However, xposed installer says, in green, that sdk23 arm64 is active, yet, i'm not sure if a couple of modules i've tried are working properly/at all.
Minminguard module (ad blocker) for instance says that xposed is not enabled, & sure enough ads are still popping up in apps & in chrome.
So i'm wondering if certain modules won't work seeing as i'm using the latest installer & sdk/64? ie do the module developers need to keep up?
Can someone shed some light on how it works in that respect?
Should i try the 32bit sdk? (all 32bit sdks will work on a 64bit cpu, won't they?)
Or should i try a different version - 82?
Is there a version that is most reliable for most modules?
Same results in here, I guess we have to change the SELinux mode somehow for it to work according to what I've read somewhere else...
llucax said:
Same results in here, I guess we have to change the SELinux mode somehow for it to work according to what I've read somewhere else...
Click to expand...
Click to collapse
As skeleton1911 wrote "and before you flash it use selinuxmodechanger". That fixed most of my problems, I also use xposed V84, haven't tried V85 though
there is a solution for xposed by skeleton1911
---------- Post added at 02:25 PM ---------- Previous post was at 02:22 PM ----------
skeleton1911 said:
Guys
there is a solution for xposed:
1. with mixplorer go to system/etc/init.d/ 07permissive and open it with editor (just tap on it)
2. remove the sleep 60 line. save and reboot to recovery
3. flash xposed framework , reboot and install xposed app and your modules. enable them in xposed app and reboot (normal xposed procedure)
4. open your apps like gravitybox etc.. ( they will connect to the xposed framework now)
5. open 07permissive again in system/etc/init.d and add sleep 60 into it again
6. save and reboot
Done!
in short words:
the cause is permissive and enforcing. Xposed only run in permissive mode on boot , but permissive mode forces some apps to close , but it is needed for viper v4a so i did this init.d script, system boots in enforcing and after 60 sec it will switch to permissive.
this is a dirty but working method. there is no other way at the moment because elephone didnt released the kernel source to modify it..
1. remove sleep 60 in 07permissive , save and reboot
2.perform the xposed stuff and after reboot open all xposed apps so they can connect to the xposed framework
3. add sleep 60 back into 07permissive and reboot
All works now!
cheers!
p.s: I will make a flashable zip for that soon
Click to expand...
Click to collapse
Do it anybody probe it? Maybe Do it working?
That's for his custom rom. For the stock rom you need selinuxmodechanger, set it to permissive and soft reboot via xposed. It will work fine then!
Aha, thanks, I didn't know what is the difference
Jtig said:
That's for his custom rom. For the stock rom you need selinuxmodechanger, set it to permissive and soft reboot via xposed. It will work fine then!
Click to expand...
Click to collapse
Mmm, OK, maybe is the soft reboot what I missed, because I used selinuxmodechanger and it didn't work with a full reboot. I am using stock but with RodriguezMod, but I think I will try the Eragon ROM. I'll report back. Thanks!
I'm finally trying the Eragon ROM, and following the steps from skeleton1911 finally seem to be working! At least Amplify for the first time is not complaining about not having Xposed. So I wiped, flashed the ROM, updated the SuperSU binary, rebooted, remove the sleep from the init.d script, went to the Xposed installer Material beta, updated from v82 to v85 using the installer, and after that flash, Amplify started to recognize Xposed!
Jtig said:
That's for his custom rom. For the stock rom you need selinuxmodechanger, set it to permissive and soft reboot via xposed. It will work fine then!
Click to expand...
Click to collapse
That fixed it, thanks.
Has anyone been able to get Android Auto to work on a Rooted S5? If so, how?
T-mobile SM-G900T running mostly stock 6.0.1, rooted using the Root Guide in the General section of this forum.
Thanks.
Magisk Manager for sure!
Enable Magisk Hide (a dozen settings down)
Class settings, swipe left panel, click Magisk Hide.
Tick boxes for any apps you want hidden from detection...
If still doesn't work, then click Hide Magisk Manager. No reboot necessary. It will reinstall itself with random package name. Enable Magisk Hide and any other settings.
Test it again.
This is xposed module works with Edxposed or you can use Tai chi magisk virtualxposed module to use this mod without installing edxposed.
What this mod gives:
1)AOD(Always on display) with time and date
2)weather notification with icon
3)app notification icons with google notification pops up i. E. onetime extended notification of perticuler app
4)battery %
5) now playing( current music playing on phone it may be work or may not work finding solution)
6)bunch of customizations.
7)battery friendly.
Requirements :
Rooted magisk installed or edxposed installed.
Downloads:
Exposed TaiChi app :
https://virtualxposed.com/tai-chi/
Download OPO Mod :
Latest 3.2
https://forum.xda-developers.com/attachments/opaodmod-v3-2-kq-apk.5223811/
Process :
1)First flash Tai chi virtual xposed module in magisk application.
2)now download Taichi app install it
3)install OPOmod module.
4) open Taichi xposed app there add system ui app using add application tab.
5) then go to manage module tab enable OPOmod app
6)click three dot menu and click update compatibility engine after update reboot
7)now open OPO mod application there enable pick Up display tab(second one) it will open existing ambient display setting available in setting. After that close app and reopen it.
8) then see if ambient display works or not if its not working try to restart OPOmod ( root method available under settings)
Finally small video if you didn't understand how and what is this
any solution to non rooted devices ?
xenon_bn said:
any solution to non rooted devices ?
Click to expand...
Click to collapse
Try to use this virtual xposed and just enable OPMod xposed module there
https://gameguardian.net/forum/files/file/128-virtualxposed/
Bro tried but it didn't worked on oneplus 6 oos 10.3.2 followed all steps but later at last step it shows working as abnormal in the opaod mod app, followed up all the steps according to the video and cross checked everything.
Jashanmallan said:
Bro tried but it didn't worked on oneplus 6 oos 10.3.2 followed all steps but later at last step it shows working as abnormal in the opaod mod app, followed up all the steps according to the video and cross checked everything.
Click to expand...
Click to collapse
Try to force stop app using force restart system ui and ambient display option given at bottom in app. Then reboot u r phone open app it should work if it still showing orange letter abnormal condition then wait it should work
pankspoo said:
Try to force stop app using force restart system ui and ambient display option given at bottom in app. Then reboot u r phone open app it should work if it still showing orange letter abnormal condition then wait it should work
Click to expand...
Click to collapse
Tried all the steps, still no luck
Jashanmallan said:
Tried all the steps, still no luck
Click to expand...
Click to collapse
Have u enables pick up display in ambient settings. I am. Using this on open beta 6 and its working good
Yes enabled it too!
pankspoo said:
This is xposed module works with Edxposed or you can use Tai chi magisk virtualxposed module to use this mod without installing edxposed.
What this mod gives:
1)AOD(Always on display) with time and date
2)weather notification with icon
3)app notification icons with google notification pops up i. E. onetime extended notification of perticuler app
4)battery %
5) now playing( current music playing on phone it may be work or may not work finding solution)
6)bunch of customizations.
7)battery friendly.
Requirements :
Rooted magisk installed or edxposed installed.
Downloads:
Exposed TaiChi app :
https://virtualxposed.com/tai-chi/
Download OPO Mod :
https://forum.xda-developers.com/attachment.php?attachmentid=4981583&d=1585510325
Process :
1)First flash Tai chi virtual xposed module in magisk application.
2)now download Taichi app install it
3)install OPOmod module.
4) open Taichi xposed app there add system ui app using add application tab.
5) then go to manage module tab enable OPOmod app
6)click three dot menu and click update compatibility engine after update reboot
7)now open OPO mod application there enable pick Up display tab(second one) it will open existing ambient display setting available in setting. After that close app and reopen it.
8) then see if ambient display works or not if its not working try to restart OPOmod ( root method available under settings)
Finally small video if you didn't understand how and what is this
https://youtu.be/UZjjcrBHYaM
Click to expand...
Click to collapse
I'm stuck on the first step - there is no Tai Chi module in magisk repo, or at least it doesn't show me
pankspoo said:
Try to use this virtual xposed and just enable OPMod xposed module there
https://gameguardian.net/forum/files/file/128-virtualxposed/
Click to expand...
Click to collapse
step by step for non root device please.?
"open Taichi xposed app there add system ui app using add application tab"
i cannot find system ui for add app ?
Oliie23 said:
I'm stuck on the first step - there is no Tai Chi module in magisk repo, or at least it doesn't show me
Click to expand...
Click to collapse
Latest version 6.1.8
https://72k.us/file/19604958-422454792
Detailed tai chi app web
https://taichi.cool/download.html
brmbjn said:
step by step for non root device please.?
"open Taichi xposed app there add system ui app using add application tab"
i cannot find system ui for add app ?
Click to expand...
Click to collapse
Download and install tai chi app(no need to install magisk module of tai chi)
https://www.lanzous.com/ib0d03c
Install Opmod.apk
Now open tai chi app click bottom action bar select add app then click on search tab on top there type system ui you will automatically see there system ui app.
Select it done
pankspoo said:
Download and install tai chi app(no need to install magisk module of tai chi)
https://www.lanzous.com/ib0d03c
Install Opmod.apk
Now open tai chi app click bottom action bar select add app then click on search tab on top there type system ui you will automatically see there system ui app.
Select it done
Click to expand...
Click to collapse
Add app.
I cannot find system ui.
I am un rooted.
System ui
brmbjn said:
System ui
Click to expand...
Click to collapse
Are you enabled first option dont show system apps(untick that one). That app doesn't need any root acess
pankspoo said:
Are you enabled first option dont show system apps(untick that one). That app doesn't need any root acess
Click to expand...
Click to collapse
Where dont show system ?
Yours rooted ?
brmbjn said:
Where dont show system ?
Yours rooted ?
Click to expand...
Click to collapse
Yes rooted
pankspoo said:
Yes rooted
Click to expand...
Click to collapse
Non root can not uncheck it ?
So it not work for u root device
With this mod can we unlock directly from the AOD using fingerprint?
All the AOD mods I've tried needs the phone to be woke up first to use fingerprint unlock.
nothing work on 10.3.2
I was curious to see what Magisk modules are working on stock rooted rom? Is there any Xposed functionality? I have a few Magisk modules working, the Google Product Sans font installer, G Visual mod, QuickSwitch, Sony Music Player and xmlpak modules are all confirmed to be working on my Stock Rooted US variant. What Magisk modules are you all using?
Magisk:
-None Display Cutout
Xposed:
-GravityBox (q)
magisk: systemless hosts
that's the only module i use for adaway
confirmed Not working: viper4android ( device bootloops)
3dekstron said:
Magisk:
-None Display Cutout
Xposed:
-GravityBox (q)
Click to expand...
Click to collapse
so xposed is confirmed working?
That's how it works, you need magisk modules: Riru (Riru-core) and Riru Ex-Xposed (YACHFA or SANDHOOK both work).
My modules:
Magisk
-None Display Cutout
-Riru (Riru-Core)
-Riru Ex-Xposed
-Systemless host
Not working - Miracast enabler - bootloop
Xposed:
-GravityBox (q)
I dont see xposed even mentioned anywhere else in this forum. How did you guys install it? In Magisk, i see 'official xposed framework' 'xposed framework (dalvik)' 'riru - edxposed (sandy hook) and 'riru - edxposed (yahfa).
Which one of these do I install? I just want to run gravity box for the most part.
Magisk modules
1 ."Riru (Riru-core)"
2."riru - edxposed (sandy hook)" or " riru - edxposed (yahfa)"
3dekstron said:
Magisk modules
1 ."Riru (Riru-core)"
2."riru - edxposed (sandy hook)" or " riru - edxposed (yahfa)"
Click to expand...
Click to collapse
any clue why its failing for me? I installed riru first. But when i try to install edexposed (either of them) it fails and says i need to install riru first.
I assume "riru core" is the plain "riru"? Or do i need to install everything labeled riru?
Or is that flashing from within magisk doesnt work? do i need to download everything and flash in twrp or something?
cnoevl21 said:
any clue why its failing for me? I installed riru first. But when i try to install edexposed (either of them) it fails and says i need to install riru first.
I assume "riru core" is the plain "riru"? Or do i need to install everything labeled riru?
Or is that flashing from within magisk doesnt work? do i need to download everything and flash in twrp or something?
Click to expand...
Click to collapse
It was working for me until "Riru - Core" got an update that, among other things, renamed the module to just "Riru." And the Riru EdXposed module seems to be looking for something with the name "Riru - Core," but since that's not the name anymore, it fails. So just wait for an update to the Riru EdXposed modules and it should work again.
_huck_ said:
It was working for me until "Riru - Core" got an update that, among other things, renamed the module to just "Riru." And the Riru EdXposed module seems to be looking for something with the name "Riru - Core," but since that's not the name anymore, it fails. So just wait for an update to the Riru EdXposed modules and it should work again.
Click to expand...
Click to collapse
by chance, do you know of another way to map nav buttons? Im really just looking to get long press back button kill app. and long press recent button to take screen shot. double press recent button to open split screen
cnoevl21 said:
by chance, do you know of another way to map nav buttons? Im really just looking to get long press back button kill app. and long press recent button to take screen shot. double press recent button to open split screen
Click to expand...
Click to collapse
There are plenty of apps on the Play Store that allow you to remap those buttons.
_huck_ said:
There are plenty of apps on the Play Store that allow you to remap those buttons.
Click to expand...
Click to collapse
Those apps are for hardware buttons. I have the moto g power. only virtual buttons