I bought a Mediapad X1 3G version. It is a nice machine, albeit a bit too large as a phone - picture a large brick near your head,
Well, I emailed [email protected] to obtain the bootloader unlock code. I got the code so I would like to go ahead. But I ran into a very strange fastboot issue. When I issue the command "fastboot devices" -
? fastboot
That question mark is supposed to be some number. So this means the device is not recognized. Hence the unlock code does not work. Weirdly, commands such as "fastboot oem get-bootinfo" works, it shows the bootloader is locked. "Fastboot reboot" also works.
Anyone has any idea how I can solve this problem? Some driver issue? Thanks.
wxppro said:
I bought a Mediapad X1 3G version. It is a nice machine, albeit a bit too large as a phone - picture a large brick near your head,
Well, I emailed [email protected] to obtain the bootloader unlock code. I got the code so I would like to go ahead. But I ran into a very strange fastboot issue. When I issue the command "fastboot devices" -
? fastboot
That question mark is supposed to be some number. So this means the device is not recognized. Hence the unlock code does not work. Weirdly, commands such as "fastboot oem get-bootinfo" works, it shows the bootloader is locked. "Fastboot reboot" also works.
Anyone has any idea how I can solve this problem? Some driver issue? Thanks.
Click to expand...
Click to collapse
You just emailed them asking for bootloader unlock code? What information did you have to provide them?
Update: bootloader on my device was already unlocked
acuratlsfan said:
You just emailed them asking for bootloader unlock code? What information did you have to provide them?
Update: bootloader on my device was already unlocked
Click to expand...
Click to collapse
I just gave them the serial number, IMEI, MAC address, and model (7D-501U). They reply pretty quickly, a few hours.
Good that you have an unlocked bootloader - When you run the fastboot command, does it show a number for your device but not a question mark?
wxppro said:
I just gave them the serial number, IMEI, MAC address, and model (7D-501U). They reply pretty quickly, a few hours.
Good that you have an unlocked bootloader - When you run the fastboot command, does it show a number for your device but not a question mark?
Click to expand...
Click to collapse
i
I can't remember i it displayed a number or a " ? " . I updated to 4.4.2 earlier... and 4.4.2 has an updated fastboot.img. The way i know if because when I enter fastboot now it displays in green letters " DEVICE UNLOCKED " under the"...hold power down 10 sec...."
Related
It looks like Huawei has made available an official method to unlock the bootloader.
http://www.huaweidevice.com/worldwide/servicePolicy.do?method=preUnlock
But i haven't tried it yet. Maybe it could lead to something useful.
both way to obtain product ID doesn't work on cm10 rom, maybe I need to use stock rom.
borisxiao said:
both way to obtain product ID doesn't work on cm10 rom, maybe I need to use stock rom.
Click to expand...
Click to collapse
tested on hwmod's c232B005 rom with bart's kernel, doesn't work either.
Rumbi said:
It looks like Huawei has made available an official method to unlock the bootloader.
http://www.huaweidevice.com/worldwide/servicePolicy.do?method=preUnlock
But i haven't tried it yet. Maybe it could lead to something useful.
Click to expand...
Click to collapse
The form doesn't work correctly. Poor Huawei, they need to get some help from WEB professionals ...
If I select "Tablet" then "Huawei Mediapad" form the two select boxes then it is impossible to fill the IMEI/MEID field.
However if you press the "SUBMIT" button the system says "The IMEI/MEID can contain numbers and letters only.".
The procedure to find the "Product ID" is wrong, or it is not for the MediaPad tablet and doesn't work.
The string they suggest to type in the phone *#*#1357946#*#* or in the calculator ()()1357946()()
doesn't bring up any "Product ID" on my tablet. Probably this number is for other devices.
I just unlocked my MediaPad device by typing:
Code:
fastboot oem unlock
So I believe this device was not really LOCKED.
hwmod said:
The form doesn't work correctly. Poor Huawei, they need to get some help from WEB professionals ...
If I select "Tablet" then "Huawei Mediapad" form the two select boxes then it is impossible to fill the IMEI/MEID field.
However if you press the "SUBMIT" button the system says "The IMEI/MEID can contain numbers and letters only.".
The procedure to find the "Product ID" is wrong, or it is not for the MediaPad tablet and doesn't work.
The string they suggest to type in the phone *#*#1357946#*#* or in the calculator ()()1357946()()
doesn't bring up any "Product ID" on my tablet. Probably this number is for other devices.
I just unlocked my MediaPad device by typing:
Code:
fastboot oem unlock
So I believe this device was not really LOCKED.
Click to expand...
Click to collapse
wow, that looks easy...
hwmod said:
...
So I believe this device was not really LOCKED.
Click to expand...
Click to collapse
I also don't see in what aspect the device should have been locked, fastboot flashing stuff worked right out of the box. Not even fastboot oem unlock was needed.
mblaster said:
I also don't see in what aspect the device should have been locked, fastboot flashing stuff worked right out of the box. Not even fastboot oem unlock was needed.
Click to expand...
Click to collapse
Correct ...
However I tried "fastboot oem unlock" as soon as I bought back in December.
Now with the following "fastboot" command my device shows:
Code:
fastboot oem device-info
...
(bootloader) Device tampered: true
(bootloader) Device unlocked: true
OKAY [ 0.004s]
finished. total time: 0.004s
while we have tested that for some others users it is:
Code:
fastboot oem device-info
...
(bootloader) Device tampered: true
(bootloader) Device unlocked: false
OKAY [ 0.004s]
finished. total time: 0.004s
You can try with your and see what you get.
I had a problem,.
I install Mediapad_2.06.26_OsiMood - Light gets Lighter on my Pad.
Now, I can not test CyanogenMod, because it is not come in "fastboot"
How can I do, thank you
anyone has any alternative to unlock the fastbooot Huawei Mediapad 7 v302u
If you have locked bootloader just flash older fw version. This or something older http://download-c.huawei.com/tcpsdownload/downLoadCenter?category=&flay=software&downloadID=NDYyNDc=
Rumbi said:
It looks like Huawei has made available an official method to unlock the bootloader.
http://www.huaweidevice.com/worldwide/servicePolicy.do?method=preUnlock
But i haven't tried it yet. Maybe it could lead to something useful.
Click to expand...
Click to collapse
This website doesn't work, there is not even a way to select MediaPad as of 7/28/2013
hwmod said:
The string they suggest to type in the phone *#*#1357946#*#* or in the calculator ()()1357946()()
doesn't bring up any "Product ID" on my tablet. Probably this number is for other devices.
I just unlocked my MediaPad device by typing:
Code:
fastboot oem unlock
So I believe this device was not really LOCKED.
Click to expand...
Click to collapse
the correct string in the calculator is ()()1357946()()=
you forgot the '=' sign...
but when I type your code in adb I get " FAILED <remote: please input key>
So then I tried to type*
Code:
fastboot oem unlock <product key I obtained from above mentioned method>
then it says: Unlocking...
OKAY [0.038 sec]
Finished. Total Time..
But the MediaPad reboots and goes into "Failed" wrong key or something of that sort, and still cannot get over the fastboot lock. Can anyone please help?
Corn Flake said:
Everything what was said there about unlocked bootloader for hws73xx. I am not sure if there is fw with unlocked bootloader for lite. Try to send email to [email protected] with your S/N number, IMEI and product id and request for bootloader unlocking code.
Click to expand...
Click to collapse
I sent an email to that address and I got the following reply from HuaWei:
From: [email protected]
Sent: Sunday, July 28, 2013 5:17 PM
Subject: 答复: i need bootloader unlock code for my mediapad
Dear Customer,
Thank you for contacting Huawei device.
Sorry that there have no bootloader unlock code for the MediaPad items.
Once again thank you for contacting Huawei device.
Best Regards.
Huawei Device Customer Care Team.
Please someone HELP ME unlock the fastboot, because this is the only firmware <<<HUAWEI MediaPad Firmware(S7-302u, Android 4.0, C235B001, EN, Network Function)>>> that I find perfectly working the way I need it, except I cannot install SU and CWM to root it because of this fastboot lock thing... I REALLY NEED HELP! PLEASE!!!
I have the TMobile Springboard 303u version, still waiting on network unlock code from tmobile... wonder if that code is going to work to unlock the bootloader too?
of only superuser you can try this way. inject su binary & superuser.apk to the official rom with linux command. set permission. then reflash it to your mediapad. but this can't fix the unlocked bootloader problem. this just add a superuser to official rom.
danisukses said:
of only superuser you can try this way. inject su binary & superuser.apk to the official rom with linux command. set permission. then reflash it to your mediapad. but this can't fix the unlocked bootloader problem. this just add a superuser to official rom.
Click to expand...
Click to collapse
i did the unthinkable! (I am so stupid) In the effort to get a working unlocked bootloader, I stubbornly flashed the wrong bootloader by using the attached application [NOTE to everyone - do NOT use this attachment for anything! you will brick your device! i am only attaching it in hopes that somebody will fully understand what i've done & troubleshoot and help/guide me in the process of unbricking my device]
So can somebody please help me unbrick my device? I am a noob and I have Windows 7 Ultimate. I don't even know how to use Linux. The sad part is that I got SU and root right before I did this stupidity. I got root and SU with the software from this website: http://www.unlockroot.com/unlockroot.html
so officially now I am really begging for HELP with step-by-step instructions on how to unbrick my device? (again - I flashed the wrong bootloader from the attached file).
can you enter to bootloader (fastboot) mode?
danisukses said:
can you enter to bootloader (fastboot) mode?
Click to expand...
Click to collapse
No. Dead. Device doesn't even look like it is turning on, which is expected when one flashes the wrong bootloader. this is brick-brick dead. it doesn't get any worse than this...
maybe the JTAG method can fix it. but JTAG method is only for professional who really2 know how to use the tools.
danisukses said:
maybe the JTAG method can fix it. but JTAG method is only for professional who really2 know how to use the tools.
Click to expand...
Click to collapse
what is JTAG method? are their detailed instructions for the T-Mobile Springboard? If there are detailed instructions for this specific device, then I can definitely do it. I've been pretty good so far at following all the instructions here. I've flashed many ROMs here, etc. The only time I get in trouble is when I go off and do stupid things like flashing the wrong bootloader... I'll never do that again! So yeah - any step-by-step instructions for Windows 7 user?
you can find it on google. it use some toolkit to flashing the board directly from PC.
Unlock code recived from Huawei support about 3 hours ago
try to install "twrp recovery for mediapad" - done
try to find people, who can build CM mod
hwmod said:
The form doesn't work correctly. Poor Huawei, they need to get some help from WEB professionals ...
If I select "Tablet" then "Huawei Mediapad" form the two select boxes then it is impossible to fill the IMEI/MEID field.
However if you press the "SUBMIT" button the system says "The IMEI/MEID can contain numbers and letters only.".
The procedure to find the "Product ID" is wrong, or it is not for the MediaPad tablet and doesn't work.
The string they suggest to type in the phone *#*#1357946#*#* or in the calculator ()()1357946()()
doesn't bring up any "Product ID" on my tablet. Probably this number is for other devices.
I just unlocked my MediaPad device by typing:
Code:
fastboot oem unlock
So I believe this device was not really LOCKED.
Click to expand...
Click to collapse
where to write this? and how to get the adb file for media pad 7 youth (S7-701u)
---------- Post added at 03:18 PM ---------- Previous post was at 02:47 PM ----------
danisukses said:
can you enter to bootloader (fastboot) mode?
Click to expand...
Click to collapse
where to get the ADB file?
I couldn't find anything specific for this phone. All the tools/videos were made for other Huawei phones, so I'm skeptic to try them out.
I'm looking for a tool for PC which will help me unlock the bootloader on my Huawei Y6. I already got the code from the official Huawei site.
Also, recommend drivers which I'll need.
if you already got unlock password for boot loader now what?
asadnow2k said:
if you already got unlock password for boot loader now what?
Click to expand...
Click to collapse
I need a script/exe whatever to input the code so I can unlock the bootloader from my PC from what I saw in the videos I watched.
Don't trust that.
Install minimal adb and fastboot from here http://forum.xda-developers.com/showthread.php?t=2317790
Go into that folder, press shift and right click, then click "Open command prompt here"
When it opens, write "fastboot oem unlock xxxxxxxx" where xxxxxx is the code you received.
It should say "waiting for device".
Shut down your phone, connect it to the PC and turn it on using VOL UP + POWER.
Fastboot should do it automatically and unlock your bootloader.
asadnow2k said:
if you already got unlock password for boot loader now what?
Click to expand...
Click to collapse
how ?
there are services to obtain bootloader unlock password via imie. paid 2us$ only
It doesnt work sir on my Huawei y6 device
BrreaKer said:
Don't trust that.
Install minimal adb and fastboot from here http://forum.xda-developers.com/showthread.php?t=2317790
Go into that folder, press shift and right click, then click "Open command prompt here"
When it opens, write "fastboot oem unlock xxxxxxxx" where xxxxxx is the code you received.
It should say "waiting for device".
Shut down your phone, connect it to the PC and turn it on using VOL UP + POWER.
Fastboot should do it automatically and unlock your bootloader.
Click to expand...
Click to collapse
It does'nt reboot automaticaly.
aping01 said:
It does'nt reboot automaticaly.
Click to expand...
Click to collapse
After giving command fastboot oem unlock xxxxcodexxxx your bootloader is unlocked. Then type fastboot reboot then it reboots normally.
Finally it works!
Ashwinrg said:
After giving command fastboot oem unlock xxxxcodexxxx your bootloader is unlocked. Then type fastboot reboot then it reboots normally.
Click to expand...
Click to collapse
Thank you so much sir!
please help
asadnow2k said:
if you already got unlock password for boot loader now what?
Click to expand...
Click to collapse
I also tried to get bootloader unlock code via official huawei website but it says you need to use the huawei id on the phone for 14 days.But I did not found where to add the huawei id please help.
asadnow2k said:
there are services to obtain bootloader unlock password via imie. paid 2us$ only
Click to expand...
Click to collapse
Show me please
I need bootlood unlock code of my huawei y6 scl-u31 imei1=860710039301521
Anwartfq said:
I need bootlood unlock code of my huawei y6 scl-u31 imei1=860710039301521
Click to expand...
Click to collapse
Thats nice, but you're requesting in the wrong site. Have you tried a google site request?
I just did this tonight on my Huawei Y6 ATU L11.
Follow this guide first: dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code
Then do this:
dc-unlocker.com/free-huawei-bootloader-unlock-tutorial
It's not free but it's worth it imo as stock on this phone is quite bad.
Can anyone make a tutorial on how to unlock the bootloader on this huawei Y6 with/without unlock code. Though I best prefer w/o unlock but even with unlock code will do. Thakns.
Did anyone find a rooting method for y6 2019 pro??? I've hunted posts everywhere to no avail, also tried getting bootlocker unlock code directly from huwaei, however, apparently they stopped giving these out a couple of years ago, I'm using this y6 2019 pro just now but it's pretty whack and they won't even upgrade it to andy10. Fookers playing god with their bootloaders. Give us em? any luck with it guys n gals?
Can you send me the code?
Pls send me the code sir/maam i really do need it i dont have money to use dc unlocker or any other kinds of $ hugry programs
If your kind enough send it to my email ?
[email protected]
aznbankaii said:
Pls send me the code sir/maam i really do need it i dont have money to use dc unlocker or any other kinds of $ hugry programs
If your kind enough send it to my email ?
[email protected]
Click to expand...
Click to collapse
There is no code because huwaei do not provide unlock codes, therefore each device including the y6 2019 remains with a locked bootloader, sell it and buy a Samsung or pixel
I ordered a Redmi note 4 through Amazon India, came out alright, all properly sealed and everything but one thing caught my attention is that on developer settings the phone unlock status says it's already unlocked! How can this be possible?
That's weird. Did you call a customer service centre? If I'd receive such product my first though would be to confirm if the Mido I got is a refurbished one or 1st hand. And even if it's one, then the Xiaomi guys should have relocked it... Maybe it's a software bug, try restarting. And the ultimate way to confirm is to use your PC, and you know the rest I hope.
Well, if you feel you can replace it (maybe) talk to amazon guys and confirm if they cover such thing in their replacement policy. Good luck.
MayankMathur said:
That's weird. Did you call a customer service centre? If I'd receive such product my first though would be to confirm if the Mido I got is a refurbished one or 1st hand. And even if it's one, then the Xiaomi guys should have relocked it... Maybe it's a software bug, try restarting. And the ultimate way to confirm is to use your PC, and you know the rest I hope.
Well, if you feel you can replace it (maybe) talk to amazon guys and confirm if they cover such thing in their replacement policy. Good luck.
Click to expand...
Click to collapse
How to check if it's refurbished via PC?
Maybe you have RN4x, it is default unlocked... You can check your box, if it is with chinese language you have 4x, if you have with english lang. it is RN4 Global version and it is locked default...
Edit: also check if it is Snapdragon 625 version or maybe it is MTK?
Sent from my Redmi Note 4x
kurogami95 said:
How to check if it's refurbished via PC?
Click to expand...
Click to collapse
You have to check if the bootloader is really unlocked or not. For this download this zip - https://drive.google.com/open?id=13Sjej5zIJPm_yiJQOVR4rEocwbhDc9oh
Unzip in pc and inside the platfrom-tools folder hold shift and right click.
In the menu it should say, open command prompt here or open powershell here.
click on the provided item (whatever of both it shows)
now, boot your device in fastboot by switching it off and holding down the power and volume down. Once the fastboot mode is open, connect your device via cable to your pc.
Now if you opened a command prompt window then type in -
Code:
fastboot devices
This command will show the connected fastboot devices. If nothing is printed on screen on executing command, then try reconnecting.
then type -
Code:
fasboot oem device-info
But if you have powershell then type in
Code:
.\fastboot devices
and
Code:
.\fastboot oem device-info
This will return some data and now you have to check the first two parameters saying "device tampered" and "device unlocked".
If device unlocked says true, then that means someone had actually used the device before. and if device tampered says true, then definetly someone has tested out your device, by doing all kinds of stuff like installing roms etc.
Use the mi flasher and flash the most current xiaomi rom. Your rom is probably a vendor rom, which is bad.
MyNameIsRage said:
You have to check if the bootloader is really unlocked or not. For this download this zip - https://drive.google.com/open?id=13Sjej5zIJPm_yiJQOVR4rEocwbhDc9oh
Unzip in pc and inside the platfrom-tools folder hold shift and right click.
In the menu it should say, open command prompt here or open powershell here.
click on the provided item (whatever of both it shows)
now, boot your device in fastboot by switching it off and holding down the power and volume down. Once the fastboot mode is open, connect your device via cable to your pc.
Now if you opened a command prompt window then type in -
This command will show the connected fastboot devices. If nothing is printed on screen on executing command, then try reconnecting.
then type -
fasboot oem device-info
But if you have powershell then type in
But if you have powershell then type in
.\fastboot devices
and
This will return some data and now you have to check the first two parameters saying "device tampered" and "device unlocked".
If device unlocked says true, then that means someone had actually used the device before. and if device tampered says true, then definetly someone has tested out your device, by doing all kinds of stuff like installing roms etc.
Click to expand...
Click to collapse
Thanks for making it easy for me. ?
Sometimes sellers unlock bootloader to flash other roms version. It's usually on online selling where there is Chinese roms on devices and buyers want global version.
As allready ppl stated, check by adb fastboot to see if its really unlocked.
Sent from my Redmi Note 4 using Tapatalk
MyNameIsRage said:
You have to check if the bootloader is really unlocked or not. For this download this zip - https://drive.google.com/open?id=13Sjej5zIJPm_yiJQOVR4rEocwbhDc9oh
Unzip in pc and inside the platfrom-tools folder hold shift and right click.
In the menu it should say, open command prompt here or open powershell here.
click on the provided item (whatever of both it shows)
now, boot your device in fastboot by switching it off and holding down the power and volume down. Once the fastboot mode is open, connect your device via cable to your pc.
Now if you opened a command prompt window then type in -
Code:
fastboot devices
This command will show the connected fastboot devices. If nothing is printed on screen on executing command, then try reconnecting.
then type -
Code:
fasboot oem device-info
But if you have powershell then type in
Code:
.\fastboot devices
and
Code:
.\fastboot oem device-info
This will return some data and now you have to check the first two parameters saying "device tampered" and "device unlocked".
If device unlocked says true, then that means someone had actually used the device before. and if device tampered says true, then definetly someone has tested out your device, by doing all kinds of stuff like installing roms etc.
Click to expand...
Click to collapse
Please can you help me? I got a Xiaomi Mi A1 and I noticed the bootloader was already unlocked, when I relock it the phone refuses to come on because I found out that "device tampered" is saying true. Please how can I get it back to false? Thank you
chuckychux said:
Please can you help me? I got a Xiaomi Mi A1 and I noticed the bootloader was already unlocked, when I relock it the phone refuses to come on because I found out that "device tampered" is saying true. Please how can I get it back to false? Thank you
Click to expand...
Click to collapse
You should contact xiaomi for this. And the seller from which you bought it. Because 98% of companies aren't allowed to sell phones with unlocked bootloader. Just leave it as it is. Tampering it by yourself would mean that you yourself did something to phone, which u haven't (not much, what u did is ok) . So getting in touch with the company and the provider would be a better option.
---------- Post added at 07:42 AM ---------- Previous post was at 07:41 AM ----------
chuckychux said:
Please can you help me? I got a Xiaomi Mi A1 and I noticed the bootloader was already unlocked, when I relock it the phone refuses to come on because I found out that "device tampered" is saying true. Please how can I get it back to false? Thank you
Click to expand...
Click to collapse
Or you can just unlock the bootloader once again to possibly make the phone functional
MyNameIsRage said:
You should contact xiaomi for this. And the seller from which you bought it. Because 98% of companies aren't allowed to sell phones with unlocked bootloader. Just leave it as it is. Tampering it by yourself would mean that you yourself did something to phone, which u haven't (not much, what u did is ok) . So getting in touch with the company and the provider would be a better option.
---------- Post added at 07:42 AM ---------- Previous post was at 07:41 AM ----------
Or you can just unlock the bootloader once again to possibly make the phone functional
Click to expand...
Click to collapse
I have unlocked it again and it's working again, but my problem now is that I can't get Ota updates on my phone and is there a way I can change "Device tampered" from true to false? Thank u
chuckychux said:
I have unlocked it again and it's working again, but my problem now is that I can't get Ota updates on my phone and is there a way I can change "Device tampered" from true to false? Thank u
Click to expand...
Click to collapse
Did u install twrp? If no then flash fastboot rom
MyNameIsRage said:
Did u install twrp? If no then flash fastboot rom
Click to expand...
Click to collapse
I didn't install twrp, if I flash with fastboot will it be locked? And how will I do it
chuckychux said:
I didn't install twrp, if I flash with fastboot will it be locked? And how will I do it
Click to expand...
Click to collapse
Most probably yea. Also you should report this in mi a1 forums as well. And you can google to find instructions for flashing update via fastboot.
Hello all, after 2 days of trying I ended up with few problems with Chinese version.
1.Serial number and factory serial Null so bootloader unlock code won't unlock it.
2. updated to the newerer version so I can't downgrade.
3. Maybe because bootloader is locked I can't enter the menu (1.fastboot 2.ForceErase) even using button trick
4.still can enter fastboot using adb commands
Since I can see update.zip in my watch SD storage after stock update, can I create update.zip where it can be tricked to update to US version?
Or a way to make the unlock code with null serial number so I can get output from unlocking algorithm from that serial and try to unlock bootloader.
Thank you.
Ahmedjp said:
Hello all, after 2 days of trying I ended up with few problems with Chinese version.
1.Serial number and factory serial Null so bootloader unlock code won't unlock it.
2. updated to the newerer version so I can't downgrade.
3. Maybe because bootloader is locked I can't enter the menu (1.fastboot 2.ForceErase) even using button trick
4.still can enter fastboot using adb commands
Since I can see update.zip in my watch SD storage after stock update, can I create update.zip where it can be tricked to update to US version?
Or a way to make the unlock code with null serial number so I can get output from unlocking algorithm from that serial and try to unlock bootloader.
Thank you.
Click to expand...
Click to collapse
Keep trying, locked bootloader does not mean that you do not have an access to ForceErase. Maybe this video will help you (https://www.youtube.com/watch?v=ZlXoeq30vM0). In my case I reached menu after counting to 6.
Hey there, I have a question, that has been bugging my head for 2 days now. So i tried unlocking the bootloader of my Lenovo K10 Note, but it just didn't work properly. So i started with enabling the option for oem unlock and usb debugging. Then i installed Android SDK and followed the common steps. Keep in mind that oem unlock is enabled. So I then proceed with fastboot flash unlock and pasting the img that Lenovo sent me. The command goes through, then it types sending unlock and then... it freezes. I then go to restart the bootloader from the phone and the flash unlock fails, pointing out a variety of errors(out of links, ect.). So my question is, what do i do know? Thanks in advance!
m3chan1zed said:
Hey there, I have a question, that has been bugging my head for 2 days now. So i tried unlocking the bootloader of my Lenovo K10 Note, but it just didn't work properly. So i started with enabling the option for oem unlock and usb debugging. Then i installed Android SDK and followed the common steps. Keep in mind that oem unlock is enabled. So I then proceed with fastboot flash unlock and pasting the img that Lenovo sent me. The command goes through, then it types sending unlock and then... it freezes. I then go to restart the bootloader from the phone and the flash unlock fails, pointing out a variety of errors(out of links, ect.). So my question is, what do i do know? Thanks in advance!
Click to expand...
Click to collapse
Which serial number you used my phone settings serial number and bootloader serial number was different I used bootloader serial number and it worked