Greetings all. After tons of reading I felt I was ready for a custom ROM (there are so many suggestions on how to custom ROM, but I "thought" I figured it out). I have a Galaxy S4, had kitkat 4.4.2, nc5. I downloaded hyperdrive KK RLS16.1. After rooting with towelroot, installing appropriate programs to allow me to install safestrap, I also downloaded the hyperdrive and the module fix for the wifi fix to the sd. I booted into recovery mode, did a full backup to my sd, did a full wipe, installed the rom, then rebooted. The phone booted to the G5 screen where I would turn on the wifi, only it wouldn't work because I didn't install the wifi module yet. I just continued without wifi and everything seems to work fine. Realizing I maybe was supposed to install the modules after the rom, but before rebooting, I tried booting into recovery, but it will either boot into the screen where it comes up with the android icon, and below it saying "downloading, do not turn off target", or I can boot back into the normal phone without wifi. I tried holding vol up, vol dwn, menu button, etc, while powering up, but I can't get there. Is there a way to get into the normal recovery mode? Since I can use 4G, should I reinstall safestrap, or any suggestions? I searched for threads to this problem but to no avail. Thanks for your help!
madddddman said:
Greetings all. After tons of reading I felt I was ready for a custom ROM (there are so many suggestions on how to custom ROM, but I "thought" I figured it out). I have a Galaxy S4, had kitkat 4.4.2, nc5. I downloaded hyperdrive KK RLS16.1. After rooting with towelroot, installing appropriate programs to allow me to install safestrap, I also downloaded the hyperdrive and the module fix for the wifi fix to the sd. I booted into recovery mode, did a full backup to my sd, did a full wipe, installed the rom, then rebooted. The phone booted to the G5 screen where I would turn on the wifi, only it wouldn't work because I didn't install the wifi module yet. I just continued without wifi and everything seems to work fine. Realizing I maybe was supposed to install the modules after the rom, but before rebooting, I tried booting into recovery, but it will either boot into the screen where it comes up with the android icon, and below it saying "downloading, do not turn off target", or I can boot back into the normal phone without wifi. I tried holding vol up, vol dwn, menu button, etc, while powering up, but I can't get there. Is there a way to get into the normal recovery mode? Since I can use 4G, should I reinstall safestrap, or any suggestions? I searched for threads to this problem but to no avail. Thanks for your help!
Click to expand...
Click to collapse
Reinstall safestrap
Sent from my SCH-I545 using XDA Premium 4 mobile app
Thank you. I tried uninstalling, then reinstalling. Does the same darn thing.
madddddman said:
Thank you. I tried uninstalling, then reinstalling. Does the same darn thing.
Click to expand...
Click to collapse
you installed the 3.72 safestrap apk, then did you install the recovery. Its a 2 step process
decaturbob said:
you installed the 3.72 safestrap apk, then did you install the recovery. Its a 2 step process
Click to expand...
Click to collapse
Thank you! Yes, I installed recovery after I installed safestrap. I also tried to uninstall recovery, then reboot, then install recovery again. Still same problem. I put on my glasses and when I reboot into recovery, the tiniest text at the top says odin mode, so I assume its looking for a connection to a computer to upload something? I was wondering if I uninstall rcovery and safestrap, could I install TWRP 2.7? I read something about 2 deffernt signatures and don't want to make this worse than it is. The phone actually is working OK except for the wifi, but it seems to me I need to be in recovery to load the modules to fix that??
Hello,
I would say to odin back to nc5 and start all over. This would fix any issue you have, assuming that you are doing everything correctly.
One thing you forgot to do: flash supersu after installing the rom.
I'm sure you can get into normal recovery. Hold down vol-up, power, and home buttons at the same time. When it boots and after a couple of seconds, you'll see blue text appear in the upper left-hand corner. When you see that, release only the power button and continue holding the other buttons.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Again, thanks for trying to help me. I forgot to mention I did flash supersu. If I try to get into recovery, I do not get the blue lines. It just goes to the downloading screen and sits there. Either that or I can go into the normal boot. I heard not to uae odin as that is unreliable. I have a mac and there is another program that is recommended. I was wondering if I can try twrp on top of safestrap, or would that brick me?
madddddman said:
Again, thanks for trying to help me. I forgot to mention I did flash supersu. If I try to get into recovery, I do not get the blue lines. It just goes to the downloading screen and sits there. Either that or I can go into the normal boot. I heard not to uae odin as that is unreliable. I have a mac and there is another program that is recommended. I was wondering if I can try twrp on top of safestrap, or would that brick me?
Click to expand...
Click to collapse
No twrp or cm or any recovery except safestrap. U will need to use heimdall (sp) if on Apple
sent via safestrap 3.72 and echo v25.1! !
I'm glad you answered that for me! I know I would have bricked it just taking stabs at it. I'll do some reading about bring it back with heimdall, and start over. I'll let you know how I did. Thank you!!
Related
Ok so, I've flashed back to stock JFD dozens of times, rerooted, etc etc etc. Done this many times. Just did again tonight, and now every time i try to go into recovery mode and hit reinstall packages to get into the actual mode where I can install a zip or whipe dalvik (etc), instead it continuously reinstalls update.zip and reboots over and over and over and over again. Deleted update.zip from my SD card, says it can't detect update.zip so nothing can be done. Put it back on, it insists on continously reinstalling the same damn thing. Getting a bit frustrated, can anyone shine a little light?
Re-root.
Sent from my GT-I9000 using XDA Premium App
Already did, same result. Thinking about just re-flashing stock, been tinkering with this a lot longer than I meant to.
reflash clockwork, get a new update package the old one may be corrupt. and update package twice and then blue recovery should turn from blue to green.
Ok figured it out. Tried reflashing clockwork mod via rom manager, it'd just hang. Reinstalled rom manager, same result, still unable to go to green recovery. Unroot via one click, reroot via one click. Reinstalled Rom manager, flashed clockwork mod again, was able to finally go to green recovery.
Took a little bit to find the right formula there, wanted to see if I could do it while avoiding reflashing stock.
i always like to odin it may take longer but it gets rid of all the old ghost roms i have on my phone.
movieaddict said:
i always like to odin it may take longer but it gets rid of all the old ghost roms i have on my phone.
Click to expand...
Click to collapse
Agreed. I always clean my phone out between roms with Odin.
was installing the hyperdrive Rom using clockwork recovery mod, it says it installed sucessfully but when i go to reboot the device it just going into reboot loop, i can get back into recovery mod but when i try to factory reset and try it again it just does the same thing again, tried installing a different rom and still same thing, what am i doing wrong?
im having the same problem. i cant boot into recovery. is there anything i can do. i was on cm10.1 before this and it worked fine. i flashed hyperdrive using OUDHS and it installed and everything. i let it sit for 10 minutes like it said to then i continued to reboot... and now its stuck on the custom padlock screen and im cant boot into recovery for some reason...
OMsupp said:
im having the same problem. i cant boot into recovery. is there anything i can do. i was on cm10.1 before this and it worked fine. i flashed hyperdrive using OUDHS and it installed and everything. i let it sit for 10 minutes like it said to then i continued to reboot... and now its stuck on the custom padlock screen and im cant boot into recovery for some reason...
Click to expand...
Click to collapse
Try to get in to Odin mode. If you can flash the Stock Image and go from there.
RLS7 Verizon S4 continuous reboot loop
galaxyfans said:
was installing the hyperdrive Rom using clockwork recovery mod, it says it installed sucessfully but when i go to reboot the device it just going into reboot loop, i can get back into recovery mod but when i try to factory reset and try it again it just does the same thing again, tried installing a different rom and still same thing, what am i doing wrong?
Click to expand...
Click to collapse
Hi I have the exact same pb, I flashed several times my S4 (I was on RLS4 before) following the instructions, no way to get out from the endless reboot loop.
There is a suggestion using ODIN, I am not very familiar on how to do that, any help?
Thanks
abalgir66 said:
Hi I have the exact same pb, I flashed several times my S4 (I was on RLS4 before) following the instructions, no way to get out from the endless reboot loop.
There is a suggestion using ODIN, I am not very familiar on how to do that, any help?
Thanks
Click to expand...
Click to collapse
dont install any audio mod and also dont install any of the music players just the samsung one !
before you go through all the trouble of ODIN, which seems to be everyones answer now a days, it is a kernel issue, flash a verizon loki kernel. It should boot.
abalgir66 said:
Hi I have the exact same pb, I flashed several times my S4 (I was on RLS4 before) following the instructions, no way to get out from the endless reboot loop.
There is a suggestion using ODIN, I am not very familiar on how to do that, any help?
Thanks
Click to expand...
Click to collapse
First, if you have a back up, restore just the system partition (this will also format your current /system) Then do a factory reset and reboot. Now I if that doesn't work, Odin is your best bet.
Sent from my SCH-I545 using xda app-developers app
FOR anyone installing Hyperdrive, the most probable cause of boot loop in the Walkman Music App. Don't choose it in Aroma!!!
If you already have, the only way to fix the boot loop is to ODIN back to stock, as Dark Menace suggested.
He can PM you the stock image, which you will have to flash in ODIN to successfully boot up again.
hey I do plenty of flashing, and from time to time get into trouble... But ODIN is not the first choice to fix... Please read the forums:cyclops:
Sent a few PM's to see if that helps. You can try the kernels first then go from there.
Sent from my SCH-I545 using xda premium
fix
I had the same problem had to go back in odin mode and reflash a old stock. If that does not work reset data and cache and install a new rom. Worked for me
DarkMenace said:
Sent a few PM's to see if that helps. You can try the kernels first then go from there.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
I will try again without selecting the music app. I was always selecting the Sony one. I will try this afternoon and keep you informed.
Thanks
abalgir66 said:
I will try again without selecting the music app. I was always selecting the Sony one. I will try this afternoon and keep you informed.
Thanks
Click to expand...
Click to collapse
It worked perfectly if we do not select any music app. Thanks
Device gets stuck at S4 logo with blue font RECOVERY BOOTING, even after Odin, any ideas??
I'm so stuck!
TheAxman said:
before you go through all the trouble of ODIN, which seems to be everyones answer now a days, it is a kernel issue, flash a verizon loki kernel. It should boot.
Click to expand...
Click to collapse
I can't get my phone to see the the SD card in recovery. My Verizon Galaxy S4 is stuck in a boot loop thanks to Hyperdrive RLS12 and Odin fails every time I try it. Any help would be greatly appreciated!!
Surge1223 said:
First, if you have a back up, restore just the system partition (this will also format your current /system) Then do a factory reset and reboot. Now I if that doesn't work, Odin is your best bet.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I am trying hyperdrive on Baseband I545VRUEMJ7 and build JSS15J.I545VRUEMJ7 (4.3). I am able to root and install safestrap. Even hyperdrive/dirty unicorns (i tired both) installs fine, but ends up in reboot loop. am i missing anything here?.
Here's the fact
1. I was running the 12-31-13 CM11 Nightly with KToonz 12-21 Kernel.
2. I had some problem with the screen not turning on after I accept a call. It's been going on for a few months now, despite doing full wipes in between, so I decided I was gonna just do another wipe and hope that it would somehow solves itself.
3. While I was in TWRP 2.5.2.X , I did factory reset
4. I also wipe /system
5. I flashed CM11 1-1-14 / 12-30 GApps / KTkernel / BootAnimation / SuperSU 1.86
6. During the last portion, I get some running message that it failed to mount E:/ something something & Partition and such
7. Thinking it was a fluke, I pressed reboot and... bootlooped at the Samsung logo screen
8. I Power + Vol UP back into Recovery and flashed the 12-31 CM11 nightly, plus GApps etc,
9. Got the same strings of messages telling that it failed to mount partition and E:/ and /data/ and something lost and found/
10. I rebooted and... Bootlooped at the Samsung logo.
11. I tried to get back into recovery and has been unable to.The little blue "Recovery Booting" seems to appear for a very short time before the phone rebooted again. Seems like it's not there anymore.
Part of me thinks that perhaps the phone's internal memory failed. So far the only thing I can do with it is charge the phone.
Anyone with any knowledge of this, please help.
you gotta go to back odin to get a recovery back on your phone. Also the screen not turning on has been an AOSP issue for awhile, it's not just you and reflashing won't do anything to fix it.
Sent from my CIA sanctioned device
joshm.1219 said:
you gotta go to back odin to get a recovery back on your phone. Also the screen not turning on has been an AOSP issue for awhile, it's not just you and reflashing won't do anything to fix it.
Sent from my CIA sanctioned device
Click to expand...
Click to collapse
What would I do with another recovery? Is the one I have on it now doesn't work anymore?
asianrage said:
What would I do with another recovery? Is the one I have on it now doesn't work anymore?
Click to expand...
Click to collapse
well if you can't boot into it, it's not working right?
asianrage said:
What would I do with another recovery? Is the one I have on it now doesn't work anymore?
Click to expand...
Click to collapse
Just a note keep in mind TWRP is not recommended for CM11. Also I am lucky I have MDK device and a version of the no data wipe stock install, whenever things go wonky (like bootloop on Samsung Logo) I Odin back to stock. make sure the phone works, then restart from scratch and re-root, re-install recovery and reflash CM. I am not super technical so sometimes it can take about 1-2 hours from screwing up the phone to going back to having a working CM11 GS4.
All Hail invisiblek
http://forum.xda-developers.com/showthread.php?t=2559335
stein5830 said:
Just a note keep in mind TWRP is not recommended for CM11. Also I am lucky I have MDK device and a version of the no data wipe stock install, whenever things go wonky (like bootloop on Samsung Logo) I Odin back to stock. make sure the phone works, then restart from scratch and re-root, re-install recovery and reflash CM. I am not super technical so sometimes it can take about 1-2 hours from screwing up the phone to going back to having a working CM11 GS4.
All Hail invisiblek
http://forum.xda-developers.com/showthread.php?t=2559335
Click to expand...
Click to collapse
Thanks for the reply. I've already started the process to flash back to stock MDK. I've been using TWRP for a while and have always been annoyed at how long it'll take to go past the logo screen (if I didn't give up and pulled the battery). Wish me luck.
I am running Hyperdrive 13 installed via safestrap 3.71 and my mk2 s4 DOES boot into the OS. Everything in the ROM works perfectly fine and I can reboot normally.
On each reboot, I see the safestrap splash screen asking if I want to boot into recovery or continue into the ROM and after 10 seconds it boots into the ROM automatically as expected.
When I try to boot into the actual recovery, however, I just get a black screen and I have to pull the battery. This happens even when I click reboot to recovery from the safestrap application in the ROM. I've tried uninstalling and reinstalling countless amount of times, even rebooting after an uninstall and then reinstalling from the stock OS, yet nothing seems to work. I've tried manually installing busybox too, but still nothing. I do still have root access, verified with root checker too.
Please help
Thanks
pavan94 said:
I am running Hyperdrive 13 installed via safestrap 3.71 and my mk2 s4 DOES boot into the OS. Everything in the ROM works perfectly fine and I can reboot normally.
On each reboot, I see the safestrap splash screen asking if I want to boot into recovery or continue into the ROM and after 10 seconds it boots into the ROM automatically as expected.
When I try to boot into the actual recovery, however, I just get a black screen and I have to pull the battery. This happens even when I click reboot to recovery from the safestrap application in the ROM. I've tried uninstalling and reinstalling countless amount of times, even rebooting after an uninstall and then reinstalling from the stock OS, yet nothing seems to work. I've tried manually installing busybox too, but still nothing. I do still have root access, verified with root checker too.
Please help
Thanks
Click to expand...
Click to collapse
That boot recovery option not functional for safestrap. Don't use it
Sent from my SCH-I545 using XDA Premium 4 mobile app
Right. If you need to get into recovery, just simply reboot your device
Sent from my SCH-I545 using xda premium 4 app
Phone: Verizon Galaxy S4
Tablet: Samsung Galaxy Tab2 10.1
decaturbob said:
That boot recovery option not functional for safestrap. Don't use it
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That works for me. How are you able to select what ROM slot to use?
k1mu said:
That works for me. How are you able to select what ROM slot to use?
Click to expand...
Click to collapse
I was interpreting the poster saying he selected "recovery" in the power off/reboot menu...not the safestrap boot screen
decaturbob said:
I was interpreting the poster saying he selected "recovery" in the power off/reboot menu...not the safestrap boot screen
Click to expand...
Click to collapse
Ah, Ok. Gotcha.
in "Boot Otions"
k1mu said:
That works for me. How are you able to select what ROM slot to use?
Click to expand...
Click to collapse
I believe you ave to go into "Boot Options" and pretty much everything you do is in there. You choose a rom slot, then "Activate". Omce it's active, it will show green in the upper right (I think) of the screen, but if you activate the Stock rom slot, it will show RED in the upper right, warning you not to flash is this rom slot (although some have done it successfully for certain reasons, I believe).
I think they all know that... The op isn't able to get into SS at all from what I gathered. K1mu asked that to clear things up a bit... Could be wrong but that's how I took it
Sent from my SCH-I545 using XDA Premium 4 mobile app
Mistertac said:
I think they all know that... The op isn't able to get into SS at all from what I gathered. K1mu asked that to clear things up a bit... Could be wrong but that's how I took it
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes this is correct sorry if it wasn't clear. No matter which method I try, I can't seem to boot into SS recovery. Rom Slot 1 is active so it just automatically boots into Hyperdrive.
Holding Volume up, power and home actually brings me into Manual Mode (is this normal?)
EDIT: To clarify, safestrap has worked before. When I flashed HD13 in the rom slot, it booted into HD but now it won't let me go back to safestrap recovery and I can't flash another ROM. Stock rom slot is still in tact as well.
pavan94 said:
Yes this is correct sorry if it wasn't clear. No matter which method I try, I can't seem to boot into SS recovery. Rom Slot 1 is active so it just automatically boots into Hyperdrive.
Holding Volume up, power and home actually brings me into Manual Mode (is this normal?)
EDIT: To clarify, safestrap has worked before. When I flashed HD13 in the rom slot, it booted into HD but now it won't let me go back to safestrap recovery and I can't flash another ROM. Stock rom slot is still in tact as well.
Click to expand...
Click to collapse
When you boot, Safestrap should show up if it's installed. What I'd try is to open Safestrap and toggle the recovery (uninstall it, then reinstall it).
NOT uninstall the Safestrap application as that'll wipe any slots you've created. Open Safestrap, then "Uninstall Recovery" followed by "Install Recovery". Hopefully that'll get your recovery back without losing your slots.
k1mu said:
When you boot, Safestrap should show up if it's installed. What I'd try is to open Safestrap and toggle the recovery (uninstall it, then reinstall it).
NOT uninstall the Safestrap application as that'll wipe any slots you've created. Open Safestrap, then "Uninstall Recovery" followed by "Install Recovery". Hopefully that'll get your recovery back without losing your slots.
Click to expand...
Click to collapse
Sorry if it wasn't clear in the OP but I've done that multiple times to no avail.
bump...
pavan94 said:
bump...
Click to expand...
Click to collapse
Still having this issue?
I had some strange things happen to me back when I has my SafeStrap S4 and the only thing that fixed it for me was Odin back to stock then redoing everything unfortunately.
Have you tried asking in the SafeStrap thread?
Sent from my S4
-KitKat
-KToonsez Kernel
-Philz Recovery
I believe that i'm having a simiular issue.
I can't get into safestrap. I'm running HyperDrive 13, and i installed it onto the stock slot after playing around with the different slots.
It was working without issues for a while, whenever i restarted i got the safestrap screen, but now that RLS14 is out, when i restart to get into safestrap it just boots me straight into RLS13. I don't see the safestrap boot screen that gives me the option to change slots.
Any idea on what it might be?
agentmes said:
I believe that i'm having a simiular issue.
I can't get into safestrap. I'm running HyperDrive 13, and i installed it onto the stock slot after playing around with the different slots.
It was working without issues for a while, whenever i restarted i got the safestrap screen, but now that RLS14 is out, when i restart to get into safestrap it just boots me straight into RLS13. I don't see the safestrap boot screen that gives me the option to change slots.
Any idea on what it might be?
Click to expand...
Click to collapse
Did you try to reinitialize Safestrap?
Go to Safestrap in your app drawer and "install recovery." If Safestrap isn't there, run a file manager and install the .apk again.
douger1957 said:
Did you try to reinitialize Safestrap?
Go to Safestrap in your app drawer and "install recovery." If Safestrap isn't there, run a file manager and install the .apk again.
Click to expand...
Click to collapse
Found it, gotta love google. Thank you for your help.
agentmes said:
Found it, gotta love google. Thank you for your help.
Click to expand...
Click to collapse
Really lol he tells you in the post you quoted what to do if it isn't in your app drawer.
Sent from my SCH-I545 using Tapatalk
joshm.1219 said:
Really lol he tells you in the post you quoted what to do if it isn't in your app drawer.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I'm a putz who doesn't know how to edit my posts.
I couldn't find it in the app drawer, so i googled the apk to download it.
Now it's working as it should. (i hope)
joshm.1219 said:
Really lol he tells you in the post you quoted what to do if it isn't in your app drawer.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
It kind of freaked me out the first time I installed Hyperdrive and Safestrap didn't seem to be there. I don't know if it stays in the drawer through the install or not. I just installed the .apk and ran it through that.
---------- Post added at 03:47 PM ---------- Previous post was at 03:45 PM ----------
agentmes said:
I'm a putz who doesn't know how to edit my posts.
I couldn't find it in the app drawer, so i googled the apk to download it.
Now it's working as it should. (i hope)
Click to expand...
Click to collapse
I just left it on my SD card from the original Safestrapping of my phone along with the modules .zip.
douger1957 said:
It kind of freaked me out the first time I installed Hyperdrive and Safestrap didn't seem to be there. I don't know if it stays in the drawer through the install or not. I just installed the .apk and ran it through that.
Click to expand...
Click to collapse
Thats the reason i freaked out, i knew for a fact that it was there previously. But i guess things disappear, which i can't imagine being a good thing.
I was rooted and on hyperdrive rls19 and everything was ok accept the dialer would not switch calls on call waiting. Rls20 came out so I figured I would give it a shot maybe it would fix the issue. It didn't... So I asked a question about it in the hyperdrive help section. It was suggested to install a dialer app for touch wiz. which seemed to install but did nothing. So last night I bit the bullet and did a full wipe install of Hyperdrive. Which didn't go well. Could not get back into android. Constant app crashing and issues. Out comes Odin with a pit file and 4.4.2 flash. Seems like it is back to stock.
Now for the issues. towelrooted and grabbed twrp manager to install recovery. It will not install recovery. Everytime I try to get into recovery even holding down up home and power it just goes to downloading. I am so at wits end!!! Please help!
jspector said:
I was rooted and on hyperdrive rls19 and everything was ok accept the dialer would not switch calls on call waiting. Rls20 came out so I figured I would give it a shot maybe it would fix the issue. It didn't... So I asked a question about it in the hyperdrive help section. It was suggested to install a dialer app for touch wiz. which seemed to install but did nothing. So last night I bit the bullet and did a full wipe install of Hyperdrive. Which didn't go well. Could not get back into android. Constant app crashing and issues. Out comes Odin with a pit file and 4.4.2 flash. Seems like it is back to stock.
Now for the issues. towelrooted and grabbed twrp manager to install recovery. It will not install recovery. Everytime I try to get into recovery even holding down up home and power it just goes to downloading. I am so at wits end!!! Please help!
Click to expand...
Click to collapse
What build are you on? If it's anything after MDK, you can't install a custom recovery because of the locked bootloader. Your only option is Safestrap.
Sent from my NCC-1701 using Tapatalk.
riker147 said:
What build are you on? If it's anything after MDK, you can't install a custom recovery because of the locked bootloader. Your only option is Safestrap.
Sent from my NCC-1701 using Tapatalk.
Click to expand...
Click to collapse
vfrufnc5 I believe!
jspector said:
vfrufnc5 I believe!
Click to expand...
Click to collapse
Then your only option is Safestrap. No custom recoveries.
How did you install RLS 19? Were you MDK before you used Odin?
riker147 said:
Then your only option is Safestrap. No custom recoveries.
How did you install RLS 19? Were you MDK before you used Odin?
Click to expand...
Click to collapse
I used safestrap to install RLS19. The problem I was having is every time I went into recovery it would 1st go into the downloading screen. and I would have to power and down volume to get to reboot and goto safestrap. Did I maybe odin in the wrong version when I fixed it last night? I cannot get Bluetooth working today at all.
jspector said:
I used safestrap to install RLS19. The problem I was having is every time I went into recovery it would 1st go into the downloading screen. and I would have to power and down volume to get to reboot and goto safestrap. Did I maybe odin in the wrong version when I fixed it last night? I cannot get Bluetooth working today at all.
Click to expand...
Click to collapse
How are you trying to get into recovery? Pretty sure the only way to do that with Safestrap is through the app itself.
As far as your Bluetooth issues, I have no idea. What file did you flash with Odin?
riker147 said:
How are you trying to get into recovery? Pretty sure the only way to do that with Safestrap is through the app itself.
As far as your Bluetooth issues, I have no idea. What file did you flash with Odin?
Click to expand...
Click to collapse
Download: VRUFNC5 Full-Wipe SCH-I545_VZW_1_20140330160240_8il17ls9o2_fac.zip
MD5: 8a22dd4a47c2c5f890227fd952657d38
That is the file I flashed in odin with pit file. I am not sure what I was in before.