hey guys, if tried it now quite a few times..
but it won't work with the rom toolkit by markolino and the adb reboot oem-unlock / fastboot oem-unlock.. but it doesn't work for me.. so I went on searching and if found a picture of a screen that hasn't displayed to me.. never!
http://forum.xda-developers.com/attachment.php?attachmentid=1889309&d=1366157926
I hope the link works. There you can see the picture I found in a Guide on that screen it says press Vol up, but i've never seen that screen on my phone.. no matter what i tried
for more info: I have a p760
Sicness said:
hey guys, if tried it now quite a few times..
but it won't work with the rom toolkit by markolino and the adb reboot oem-unlock / fastboot oem-unlock.. but it doesn't work for me.. so I went on searching and if found a picture of a screen that hasn't displayed to me.. never!
http://forum.xda-developers.com/attachment.php?attachmentid=1889309&d=1366157926
I hope the link works. There you can see the picture I found in a Guide on that screen it says press Vol up, but i've never seen that screen on my phone.. no matter what i tried
for more info: I have a p760
Click to expand...
Click to collapse
Follow this Guide
http://forum.xda-developers.com/showthread.php?t=2778839
Best luck
thanks.. i will try that way
i will inform you, if it works or doesn't
i stuck at the same part, rooting is no problem, but when i want to open the bootloader and type "adb reboot oem-unlock" it just boots into fastboot mode...
Sicness said:
i stuck at the same part, rooting is no problem, but when i want to open the bootloader and type "adb reboot oem-unlock" it just boots into fastboot mode...
Click to expand...
Click to collapse
if device boot direct in fastboot mode means ur already unlocked
really would be nice.. is there a way to check the bootloader if it's already unlocked or still locked?
Sicness said:
really would be nice.. is there a way to check the bootloader if it's already unlocked or still locked?
Click to expand...
Click to collapse
Hi Sicness, two ways:
1) put your L9 in S/W mode, if it's unlocked there will be a little test saying it.
2) with the hidden menu 3845#*760#
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
yes, you're right big thanks man :good:
do you have a l9, any suggestions for a good rom, what rom do you use?
Sicness said:
yes, you're right big thanks man :good:
do you have a l9, any suggestions for a good rom, what rom do you use?
Click to expand...
Click to collapse
Hi Sicness, you're welcome. At the moment I'm on stock P76020p-EUR-XX. I'm thinking about Slimkk, but I don't know, there are a lot of good roms out there...
Cheers. Good luck
Sent from my LG P76020p-EUR-XX unlocked and rooted
but the methods to check.. the first.. what is S/W-mode, and how can i turn my phone into that mode?
&the second yeah that doesn't function at all..
Sicness said:
but the methods to check.. the first.. what is S/W-mode, and how can i turn my phone into that mode?
&the second yeah that doesn't function at all..
Click to expand...
Click to collapse
Hi Sicness, you need a PC and an USB cable:
you have to turn off the phone and remove the battery,
put the battery in again, hold volume up and plug in the USB cable, you'll see S/W Upgrade. (If you see the LG logo repeat again) .
Cheers. Good luck.
Edit: for the second method you must enter the code in your phone as if you were doing a call.
Sent from my LG P76020p-EUR-XX unlocked and rooted
Related
Please help to show me how to flash SE live with walkman by fastboot.
http://www.youtube.com/watch?v=JmvCpR45LKA
dumraden said:
http://www.youtube.com/watch?v=JmvCpR45LKA
Click to expand...
Click to collapse
i know ur a pro,but u should help other who need helps....hhhh
same here cant get the fastboot to work with the up/down volume key
desire91 said:
i know ur a pro,but u should help other who need helps....hhhh
Click to expand...
Click to collapse
Im far from being one, and not trying to act as one. Most forums, along with this one, follow some rules, and some procedures need to be done.
People need to start using search buttons. I am here to help, but im not here to help people who cant help themselves in the first place. This is a forum, not kindergarten.
same here cant get the fastboot to work with the up/down volume key
Click to expand...
Click to collapse
Volume up goes into fastboot, volume down goes into SEMC recovery. You have the phone switched off, and while pressing the up button you connect through usb, If that doesnt take you to fastboot you have a bootloader locked device. Search for more info.
i think that i had unlocked the bootloadrer i used the test point method with s1tool( http://forum.xda-developers.com/showthread.php?t=1285285 ) it didn't gave me any error message, it looked like it worked fine, tried volume up volume down even the home button and various combinations of it... the volume buttons load the CWM and if i restart holding the volume up key it boots into charging mode...
but maybe i didnt get the bootloader unlocked, will try to unlock it later maybe i should try another unlocking method?
update my phone says Bootloader Unlock Allowed: No so the bootloader is unlocked but i cant enter into fast boot mode, why is it?
it's an already answered qstn
http://forum.xda-developers.com/showthread.php?t=1993703
chaopov said:
Please help to show me how to flash SE live with walkman by fastboot.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
an0nym0us_ said:
Click to expand...
Click to collapse
Even before I clicked on the spoiler, I knew this will be a burn!! :laugh::laugh:
help
helo,, please help me,, how to install fasboot driver on windows8 x64, ?
dendipradigta said:
helo,, please help me,, how to install fasboot driver on windows8 x64, ?
Click to expand...
Click to collapse
Tried the Search tool? Or Google?
http://flashtool.net/disabledrivers.html
sir,
when i connect my phone in fast boot mode the blue led glows,but my system says device does not recognized ....
i tried changing ports , they all work fine with any other devices ,even when my phone is in data storage mode ....
but in fastboot mode it says device does not recognised.....i reintalled all the drivers....also its win 8.1 ....and my phone
runs on cm11 ..... or else if you could suggest any other method for flashing kernel ....
thankyou
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i was on 2.3.4 OTA updated once AT&T i tried to unlock it's bootloader after rooting
i did everything right but while unlocking bootloader it got failed
sorry if it was posted before i googled and every link provied for solution was dead
can anyone give me a solution and working links thanks for reading
Youre already in fastboot mode. Simply follow the instructions for using fastboot to unlock. This is not a hardbrick and is a normal part of unlucking phones on 4.5.91+.
OMG this video worked fine and now i have my phone back working http://www.youtube.com/watch?v=pspIVBKGPRU
i installed permanent recovery can i install any custom rom ?
kasrawis said:
OMG this video worked fine and now i have my phone back working http://www.youtube.com/watch?v=pspIVBKGPRU
i installed permanent recovery can i install any custom rom ?
Click to expand...
Click to collapse
Yes, you can start flashing custom rom. Be sure to perform nandroid backup before flashing.
Sent from my MB860 using xda premium
can you give me a working link for custom firmware i can download ?
i am trying to find the video but it has been removed
can u post another link to another video or soo.....
i am exactly where you first post is
HELPPPPPPPPPPPPPP
Download the programe: https://www.dropbox.com/s/1qryq20dhduqiqx/Auto-Unlock Bootloader.rar
this programe has the fix of your problem. RUN the 'MAIN.bat' in the file. I do not remember its number in the menu but the menu will lead you to solve the problem. It must be 'FIX 105:1:2' or something like that.
Hit the 'thanks' if I helped
pls pls pls tell me its not bricked
tapeworm_george said:
Youre already in fastboot mode. Simply follow the instructions for using fastboot to unlock. This is not a hardbrick and is a normal part of unlucking phones on 4.5.91+.
Click to expand...
Click to collapse
Ok. I got the SAME screen. But i didn't root it before i unlocked it! (im new at this) and it says all that and batt too low to flash. and if i plug it into the usb it won't power on at all. just flashes the green light and nothing. if i plug it into a wall it brings up that screen. Will it not charge??? ugh pls pls pls help me. I just got this phone. I think i flashed the wrong sbf on it? idk what to do!!!!!! :crying::crying:
---------- Post added at 02:18 AM ---------- Previous post was at 02:07 AM ----------
karma1385 said:
Ok. I got the SAME screen. But i didn't root it before i unlocked it! (im new at this) and it says all that and batt too low to flash. and if i plug it into the usb it won't power on at all. just flashes the green light and nothing. if i plug it into a wall it brings up that screen. Will it not charge??? ugh pls pls pls help me. I just got this phone. I think i flashed the wrong sbf on it? idk what to do!!!!!! :crying::crying:
Click to expand...
Click to collapse
AND everything i DL trying to get the stuff to fix it. won't open. keeps saying unexpected end of archive and blah blah blah in winrar. idk wtf to do. im so frustrated right now. and i doubt anyone is gonna answer me cuz this thread is 6mon old. AHHHHHHHHHHH
karma1385 said:
Ok. I got the SAME screen. But i didn't root it before i unlocked it! (im new at this) and it says all that and batt too low to flash.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2054338
read the whole thread. the answer should be there.
I would flash ClockWorkMod as recovery.
http://www.clockworkmod.com/rommanager (search for Atrix 4G)
I prefer the Touch version, much easier to use.
Then just flash with fastboot:
fastboot flash recovery <yourImagePath>.img
Click to expand...
Click to collapse
Also, check out ePinter's CM10 (not the 10.1, it's not that stable), which you can flash from the new recovery. Don't forget the Google Apps package (install AFTER the main image).
http://forum.xda-developers.com/showthread.php?t=1781970
guys,
I'm looking for a little help I have been using my view since february... flashed it to HC the day I got it, but after charging it last night I woke up to the bootloader screen and I cannot get it to boot normally.
here is the screen I am stuck on
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.flickr.com/photos/[email protected]/7660055638/
If someone could be so kind as to tell me how to get back to a normal boot.
I would be most appreciative...
Thanks,
-C-
zalaj said:
guys,
I'm looking for a little help I have been using my view since february... flashed it to HC the day I got it, but after charging it last night I woke up to the bootloader screen and I cannot get it to boot normally.
here is the screen I am stuck on
http://www.flickr.com/photos/[email protected]/7660055638/
If someone could be so kind as to tell me how to get back to a normal boot.
I would be most appreciative...
Thanks,
-C-
Click to expand...
Click to collapse
not supposed to post here bud but i'll try to help u out
um... wtf. It says fastboot 9v a/c, I thought it was supposed to be 12 hm.
can u go to recovery?
do this, unplug it (the power), press and hold the power button til it shuts completely off, im not sure if the orange light is supposed to be off or on, wait about 15 seconds then press and hold the power button and see if it starts up
9 Volt A/C????? EXPRESS XA???? Your tablet looks fu**ed up!
Whoareyou said:
9 Volt A/C????? EXPRESS XA???? Your tablet looks fu**ed up!
Click to expand...
Click to collapse
lol don't scare the guy to much, i actually found out it "is" 9v a/c, granted he never got back to me on the restarting thing i told him to do
Sorry guys been crazy... I tried rebooting... It just rebooted back into bootloader.
the Only options I can select are:
Bootloader
reboot
reboot bootloader
power down
Bootloader gives me:
fastboot
recovery
factory reset
clear storage
simlock
image crc
selecting recovery takes me back to bootloader screen..
Where to go from here?
zalaj said:
Sorry guys been crazy... I tried rebooting... It just rebooted back into bootloader.
the Only options I can select are:
Bootloader
reboot
reboot bootloader
power down
Bootloader gives me:
fastboot
recovery
factory reset
clear storage
simlock
image crc
selecting recovery takes me back to bootloader screen..
Where to go from here?
Click to expand...
Click to collapse
very very interesting, did you try what I said?
kevinrocksman said:
lol don't scare the guy to much, i actually found out it "is" 9v a/c, granted he never got back to me on the restarting thing i told him to do
Click to expand...
Click to collapse
kevinrocksman said:
very very interesting, did you try what I said?
Click to expand...
Click to collapse
That I did... goes back into bootloader every time.. WTF?
zalaj said:
That I did... goes back into bootloader every time.. WTF?
Click to expand...
Click to collapse
the only other thing I can tell you to do.... is take the tablet apart, unplug the battery, wait about 30 seconds then plug it back in and see if it starts
kevinrocksman said:
the only other thing I can tell you to do.... is take the tablet apart, unplug the battery, wait about 30 seconds then plug it back in and see if it starts
Click to expand...
Click to collapse
I about to send it to you and hopefully you can work some magic on this paperweight...
PM me your address...
-C-
Hello everyone! As Some Users have this problem,and many others of you can have it too,I'm writing this guide to get back to LG's ICS when you're coming from CM10. This also works for Unbricking your device.
Warning,Dragons Ahead! BEFORE YOU START DOING THIS,I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE,THIS HAS BEEN TESTED AND WORKING!
Requirements::
A Windows Based PC(This has been tested under Windows 7 SP1 64-Bit,I'm not sure it will work under Windows 8)
L7 With CM10 on it
Homero's V10K with CWM,ROOT and Unlocked Bootloader which you can find here: http://forum.xda-developers.com/showthread.php?t=2176430 credits to Homero for making the KDZ.
KDZ_FLASHER which you can find at the end of the post.
LG USB Drivers Installed
ADB which you can find at the end of the post.
So,Let's Start!
1. Once You've Downloaded Homero's V10K,Extract the ZIP and you will find a .KDZ file.
2. Now Download KDZ_FW_UPDATE.zip and extract it,then open the folder where you extracted it and Start KDZ_FW_UPDATE_EN with Administrator Rights (Right Click on file and select Run As Administrator...)
3. Once the program started,in Type select 3GQCT and in Phone Mode select EMERGENCY, then in KDZ File select the precedently downloaded Homero's V10K kdz file and press open.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Make Sure your Phone is connected to the computer in EMERGENCY MODE( Remove the battery from the phone,then while pressing Vol+ Connect the usb to the computer,a yellow screen must come up showing EMERGENCY)
5. Once you've done this,press Launch Software Update and let it work,the procedure takes about 5-10 Minutes,so don't worry.
6. At the end of the procedure the phone will reboot and an LG Animated Logo will come up,and after some minutes KDZ_FW_UPDATE Will say you that there has been an error,Don't panic
7. With still the phone connected to the PC,Download ADB zip at the end of the post and extract it in your C:/ Drive,then open up CMD and write:
Code:
cd ADB
adb devices(just to make sure that the computer recognizes your phone)
adb reboot recovery
8. Now your phone will reboot in CWM Recovery, just do Wipe Data/Cache,Wipe Cache,Wipe Dalvik(Which is situated in Advanced Menu). When you have done this,select Reboot System and wait for your phone to finish the boot,and ENJOY!Good as new! :victory:
That's all,I Hope I could help you!
Thanks To:
-Homero2 for making the V10K KDZ Flashable with ROOT,CWM and Unlocked Bootloader
This is actually the same thing as unbricking your phone you know...
Sent from my LG-E610 using xda premium
dev-DaT said:
Thuis is actually the same thing as unbricking your phone you know...
Sent from my LG-E610 using xda premium
Click to expand...
Click to collapse
Yep,I've done a mistake when I wrote the guide :cyclops: I'll correct it
Wolf80 said:
Yep,I've done a mistake when I wrote the guide :cyclops: I'll correct it
Click to expand...
Click to collapse
hi wolf, follow everything on your tutorial but my phone stock on boot animation. Any recommendation?
Edit: Phone back to live again, but using the button combination. I was not able to boot using the adb command.
Thanks to you and homero for the guide.
vaikz said:
hi wolf, follow everything on your tutorial but my phone stock on boot animation. Any recommendation?
Edit: Phone back to live again, but using the button combination. I was not able to boot using the adb command.
Thanks to you and homero for the guide.
Click to expand...
Click to collapse
When the phone reboots,you have to wait 2-3 mins till it connects,then write adb devices in cmd and it should figure in devices list Anyway I'm glad I could help ya
Thanks for the tutorial. Saved my ass.
com975 said:
Thanks for the tutorial. Saved my ass.
Click to expand...
Click to collapse
You're welcome man
does this method also work for e610?
xstatik said:
does this method also work for e610?
Click to expand...
Click to collapse
I don't know man,I tested it only on P700,there should be a guide somewhere for E610
does this tut goes with p880
hi
i have a p768 and i ruind it in old kdzoffline method and it got stuck in s/w upgrade mode, i sent it to lg service center and they booted it up but it came with no imei and no signal, am wondering if i use lg flash tool 2014 method and do a clean upgrade will it recover my imei ?
what can i do ?
Hi @danzukuka,
You could try reflashing your IMEI with tutty: http://putty.dwalin.ru/?downloads
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
BajoPrimate said:
Hi @danzukuka,
You could try reflashing your IMEI with tutty: http://putty.dwalin.ru/?downloads
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
actually i tried doing this method and i read this topic
http://forum.xda-developers.com/showthread.php?t=1734330
but it can not be done, something is wrong, in port settings i dont have cp image download and when i set it to cp usb in hyperterminal/tutty is just running dots and i can not write anything.
and i heard for recovering imei you have to be on stock rom which i am now at 4.0.4 but i believe cp image download is in 4.1.2 !
whats your opinion ? update to 4.1.2 ? and if yes with ota or lg flash tool 2014 ?
sorry for my grammers.
danzukuka said:
actually i tried doing this method and i read this topic
http://forum.xda-developers.com/showthread.php?t=1734330
but it can not be done, something is wrong, in port settings i dont have cp image download and when i set it to cp usb in hyperterminal/tutty is just running dots and i can not write anything.
and i heard for recovering imei you have to be on stock rom which i am now at 4.0.4 but i believe cp image download is in 4.1.2 !
whats your opinion ? update to 4.1.2 ? and if yes with ota or lg flash tool 2014 ?
sorry for my grammers.
Click to expand...
Click to collapse
Hi, as far as I know, in settings you must select CP USB (the CP image download option isn't in my L9's 4.1.2 menu neither).
You need to select the appropriate serial port.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry, but I'm not sure about your issue.
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
BajoPrimate said:
Hi, as far as I know, in settings you must select CP USB (the CP image download option isn't in my L9's 4.1.2 menu neither).
You need to select the appropriate serial port.
Sorry, but I'm not sure about your issue.
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
i dont know i may be doing something wrong.
can you provide me a step by step tutorial with pictures ?
danzukuka said:
i dont know i may be doing something wrong.
can you provide me a step by step tutorial with pictures ?
Click to expand...
Click to collapse
Hi danzukuka, I've found one in an spanish forum, in spanish obviously, with only another picture.
I'll provide you a link in a minute.
Cheers. Good luck.
Link: http://www.htcmania.com/showthread.php?p=14664814
Sent from my LG P76020p-EUR-XX unlocked and rooted
BajoPrimate said:
Hi danzukuka, I've found one in an spanish forum, in spanish obviously, with only another picture.
I'll provide you a link in a minute.
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
not working ...
i dont know what is wrong, this phone is fu**ed up.
danzukuka said:
not working ...
i dont know what is wrong, this phone is fu**ed up.
Click to expand...
Click to collapse
What a pity!
Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted