First off, all credit goes to xdabbeb...awesome developer!
Here is a port of the Split Window mod from the G2...
At the moment this will only work on the 20D OTA(US)...to run on other variants/firmware it would have to be ported over. It is not a one size fits all mod (need the framework for each).
Install Instructions:
1. Make a backup
2. Flash the .zip file
3. Upon reboot, use a file explorer to add the following lines to the build.prop
ro.lge.capp_splitwindow=true
persist.splitwindow.support_all=true4.Reboot
5. Go to Setting: Multi-tasking to enable features of Split Window.
6. Enjoy!
NOTE: I will work on updating the scripts to add the new build.prop lines but for now they need to be done manually.
If you would like to try the port yourself...use this guide by xdabbeb...http://forum.xda-developers.com/showthread.php?t=2792938&page=1
If you have questions feel free to shoot me a PM and I will help out...
DOWNLOAD:
https://www.dropbox.com/s/9futlb4rzq4pja4/lg_gpad_splitwindow.zip
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hensonlf said:
First off, all credit goes to xdabbeb...awesome developer!
Here is a port of the Split Window mod from the G2...
Before flashing, please make sure you have a working backup. I have tested this on my device (V500) and so far so good (I'm on the stock ROM with a couple xposed modules installed).
Be sure to the check multi-tasking tab in settings to enable features of Split Window...
Click to expand...
Click to collapse
Does it work on LRS ROM?
Jhon998 said:
Does it work on LRS ROM?
Click to expand...
Click to collapse
Tried, Got Weird BootReboots. (yep, animation didn't stood looping forever, it rebooted with not fixed timings)
Does this work for all apps?. I can see the list of apps supported in the small box are long
PaleHorseman said:
Tried, Got Weird BootReboots. (yep, animation didn't stood looping forever, it rebooted with not fixed timings)
Click to expand...
Click to collapse
The only ROM I have been able to try it on is stock 4.4.2. Basically, the OTA and I uninstalled some of the bloat and added some xposed modules. If anything in regards to the framework has been changed in the LRS ROM I'm not sure this would work. I would need to do some digging. Sorry about that guys!
EDIT: Looks like the LRS ROM is based on 20b this may be part of the issue with the bootloop. Not sure if anything changed between 20b and 20d.
Vietanh198 said:
Does this work for all apps?. I can see the list of apps supported in the small box are long
Click to expand...
Click to collapse
It should work for all apps but some may behave a bit wonky when in split window...for example,in Clash of Clans, my touches are off a bit.
i can not use on Vanir Rom.
com.android.phone always stops and i can not do anything :crying:
k1n9n0th1n9 said:
i can not use on Vanir Rom.
com.android.phone always stops and i can not do anything :crying:
Click to expand...
Click to collapse
Dang! From what I can tell, it would have to be built for each ROM available for the device...I don't think it is one size fits all.
If I have time, I can try and get it to work on some of the more popular ROMs for the device...just not sure how soon I can get to it.
Can anyone confirm this working on their device? If so, please post what variant/firmware you are running...
so LRS gets bootloop because its based on 20b not 20d?? how the hell i can get a 20d??
k1n9n0th1n9 said:
i can not use on Vanir Rom.
com.android.phone always stops and i can not do anything :crying:
Click to expand...
Click to collapse
Vanir is AOSP.
This SliptView is for LG Framework, it will not work on aosp.
the same way it doesn't work on AOSP G2, etc.
You should try xposed framework, there is an multiwindow thingy there, i bet.
Jhon998 said:
so LRS gets bootloop because its based on 20b not 20d?? how the hell i can get a 20d??
Click to expand...
Click to collapse
What I did was make a backup of all my data in TWRP (also backed my apps up with Titanium Backup) , then used the LG Mobile tool to go back to plain ol stock, took the 20d OTA, then restored my data from TWRP.
There may be a better way but I took this route because I had caused a bootloop messing with something else.
hensonlf said:
What I did was make a backup of all my data in TWRP (also backed my apps up with Titanium Backup) , then used the LG Mobile tool to go back to plain ol stock, took the 20d OTA, then restored my data from TWRP.
There may be a better way but I took this route because I had caused a bootloop messing with something else.
Click to expand...
Click to collapse
Just tried on V20b Stock white v20d downloads.
same bootloop.
Download of v20d kdz:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=LG0000597081061
I believe it is US.
Edit:
Worked like a charm on Stock V20d, from the KDZ.
Thanks man!
Edit2: just noticed, almost no app apeared on the menu choice.
So i went looking for an solution:
ro.lge.capp_splitwindow=true
persist.splitwindow.support_all=true
These 2 lines are missing from build.prob
PaleHorseman said:
Just tried on V20b Stock white v20d downloads.
same bootloop.
Download of v20d kdz:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=LG0000597081061
I believe it is US.
Edit:
Worked like a charm on Stock V20d, from the KDZ.
Thanks man!
Edit2: just noticed, almost no app apeared on the menu choice.
So i went looking for an solution:
ro.lge.capp_splitwindow=true
persist.splitwindow.support_all=true
These 2 lines are missing from build.prob
Click to expand...
Click to collapse
Oh crap, forgot to include that in the OP...sorry about that and good catch man! I will also try to add that to the zip file.
EDIT: OP updated.
How can this be added without a custom recovery and towel root? Tia
fgcchevy said:
How can this be added without a custom recovery and towel root? Tia
Click to expand...
Click to collapse
You would need at least root...then you could follow the guide that is linked in the OP...I highly recommend having a custom recovery so you are able to make a backup in case something goes wrong.
...
Bootloop on 20d
Hmmm...have any other mods installed?
Can u brick the tablet if you do it wrong?
Sent from my LG-V500 using XDA Free mobile app
Related
Updated 20-02-2015
Introduction
This is a Graphic User Interface Toolkit for the OnePlus One.
It will allow you to perform all the basic root actions for the OnePlus One easily.
YOU NEED TO HAVE THE USB DEBUG ON ALL THE TIME
If the program not open, you need to download PowerPacks.dll (link below) and put it in the same folder as the program.
Features:
- Install ADB drivers
- Unlock bootloader (Needed to do all actions)
- Lock bootloader
- Root
- Flash CM11S
- EFS Backup/Restore (1st program to do this in OnePlus One)
- Boot and Flash custom recoveries
- Flash custom kernels
- Auto Update
- Install .apk's
- Backup/ Restore phone
- Record screenshot and movie
Future updates:
- BugFixes
- More options
Note: This program was based on the gui manudroid19.
This program is not JAVA, you need to have installed net framework 4.5 to run it.
Im not responsable if you brick your phone.
I suggest you do the EFS backup soon after making root before any process.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download v1.3: MEGA
Direct Download: Direct Download
PowerPacks.dll: MEGA
Changelog:
CLICK HERE
Donate:
wow this is handy! Thanks a lot for this!!
In v1.0.1 im gonna put new root method. (No wipe the device)
Awesome. I will try this today when i get my device.
If someone found some bug post it please
Today I will receive my OPO, will use it and report.
thanks a lot bro
I wonder why non of these toolkits have UnRoot feature implemented??
Won't Install
I'm getting an error when trying to install. Has anyone been successful?
Mikey said:
I wonder why non of these toolkits have UnRoot feature implemented??
Click to expand...
Click to collapse
To unroot go to SuperSU settings.
IReptheking what are you trying install?
What is the error?
Will this work with Windows 8.1?
jbass350z said:
Will this work with Windows 8.1?
Click to expand...
Click to collapse
I think yes.
Try it
when i try to download the cm 11s rom, it says error occured!
aldaris565 said:
when i try to download the cm 11s rom, it says error occured!
Click to expand...
Click to collapse
Cause you click 2 times in the Download button.
Click only once, wait and will see the bar moving.
The download takes some time to start (depending of your internet).
v1.1 is out!
extream87 said:
To unroot go to SuperSU settings.
IReptheking what are you trying install?
What is the error?
Click to expand...
Click to collapse
Let me reword this........return the phone back to stock.
Mikey said:
Let me reword this........return the phone back to stock.
Click to expand...
Click to collapse
To return the phone back to stock just install CM11S.
v1.1.1 is out!
Comment the thread please.
Tried functions (not their functionality) and worked quite well. I am still waiting for my 1+1, still under processing..
I have one question though, is it possible to allow this utility to flash own files like recovery or kernel without downloading any by referring to our own copies? If not, can that be implemented in any future version?
Newest version still opens and says outdated, and trys to prompt me to download the EXE file again, over, and over, and over. Disconnecting from the internet should fix this problem, but i mean, really, who does that anymore.
--
and when started without internet connected, straight to run time errors from trying to connect to dropbox on start, and having improper try/catch methods for startup.
#vbmasters
jbass350z said:
Will this work with Windows 8.1?
Click to expand...
Click to collapse
does not work on windows 8.1 :crying:
nicesoni_ash said:
Tried functions (not their functionality) and worked quite well. I am still waiting for my 1+1, still under processing..
I have one question though, is it possible to allow this utility to flash own files like recovery or kernel without downloading any by referring to our own copies? If not, can that be implemented in any future version?
Click to expand...
Click to collapse
This is hard to do.
docsparks said:
Newest version still opens and says outdated, and trys to prompt me to download the EXE file again, over, and over, and over. Disconnecting from the internet should fix this problem, but i mean, really, who does that anymore.
--
and when started without internet connected, straight to run time errors from trying to connect to dropbox on start, and having improper try/catch methods for startup.
#vbmasters
Click to expand...
Click to collapse
Try this, when you download the new version, delete the older.
Im not getting this problem here.
jejemc said:
does not work on windows 8.1 :crying:
Click to expand...
Click to collapse
You have tried in compatibility mode? What is the error?
Hi guys it's only this morning I have an hour to prepare SecSettings.apk
for all effects. it's for 4.4.4 sprint tw deodex . for odex try and remove odex file.
just flash my zip.
Update 10/21/14 add energy saving, (gray mode). And pattern lock types.
«noted» that charging effect is activated. but work only if you have keyguard.apk note 4 Chinese.
https://mega.co.nz/#!ol5wSYpR!Vjm14v2icEFT353wx8Veukcf_EJsiYAbXRdRKB-5_Jw
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloading now
daswahnsinn said:
Downloading now
Click to expand...
Click to collapse
then work how?
It works great for me! Thanks!
I originally tried to get this to work on odexed stock rooted rom. I had poor results. I ended up getting it to work, but couldn't change it and it was a big hassle to get one to stick.
So, I flashed deodexed stock rom over the top of my odexed one without wiping anything except dalvic and cache. Then, reflashed this and......Joy!
Now, I have all the unlock effects!
Thanks again!
FreddyFredFred said:
It works great for me! Thanks!
I originally tried to get this to work on odexed stock rooted rom. I had poor results. I ended up getting it to work, but couldn't change it and it was a big hassle to get one to stick.
So, I flashed deodexed stock rom over the top of my odexed one without wiping anything except dalvic and cache. Then, reflashed this and......Joy!
Now, I have all the unlock effects!
Thanks again!
Click to expand...
Click to collapse
sorry for odex. but you had much to remove. settings.odex ?? strange that its not working on odex ... not enough guys. I thought there was not. Users 4.4.4 sprint
When I renamed the secsettings.odex to secsettings.bak (file name isn't exact, I don't think) , other things quit working. The lock screen no longer worked. My home and power buttons didn't function correctly. But, I had all the unlock effects listed. I tried to get the stone skip one to work, but I didn't have a lock screen. So, I renamed settings back to .odex, but that didn't work to fix. So, I restored only the system part of a week old backup. And everything worked. The stone skip was my unlock effect. When I went into my unlock effect settings, only the stock ones were there and none were selected.
That's when I decided to dirty flash stock rooted deodex rom on my phone. Everything seems good now!
I don't know if I did something wrong, or wrong order or what, but, I enjoy the learning process of getting stuff to work.
Thanks again for this!
Worked fine for me, thank you for the upload.
Working fine here.. just tested all of the options with out any issues. I'm odexed stock rooted rom 4.4.4
All i did was unzipped the file, copied the file to System/priv-app. Renamed the original file and odex tLD ,paste the new file and changed permission to 0644
Thank you OP
update.. only issue i see so far is that any selection wont stick on reboot.
hi,
it would be nice if I can get this done to my Galaxy Note 8 (stock rooted 4.4.2). is it possible if you can give me where I can change or modify to make it work? I can decompile secsettings.apk and look for it, but no idea what to look to turn all these options..
gabesir said:
Working fine here.. just tested all of the options with out any issues. I'm odexed stock rooted rom 4.4.4
All i did was unzipped the file, copied the file to System/priv-app. Renamed the original file and odex tLD ,paste the new file and changed permission to 0644
Thank you OP
update.. only issue i see so far is that any selection wont stick on reboot.
Click to expand...
Click to collapse
I did not understand for your only problem? Google translation sorry .. you mean that you had selected effects are not after reboot?
jazzespresso said:
hi,
it would be nice if I can get this done to my Galaxy Note 8 (stock rooted 4.4.2). is it possible if you can give me where I can change or modify to make it work? I can decompile secsettings.apk and look for it, but no idea what to look to turn all these options..
Click to expand...
Click to collapse
I am not able to do some thing. simply note 8 different secsettings. Certainly effect are perhaps not. particularly 4.4.2. but I thought I saw that note 8 starts 4.4.4 ..
Djimmy said:
I did not understand for your only problem? Google translation sorry .. you mean that you had selected effects are not after reboot?
Click to expand...
Click to collapse
I select any unlock effect and it works , If I reboot it defaults back to no effects
gabesir said:
I select any unlock effect and it works , If I reboot it defaults back to no effects
Click to expand...
Click to collapse
Yep, i happened the same problem after my phone reboot :crying:
gabesir said:
I select any unlock effect and it works , If I reboot it defaults back to no effects
Click to expand...
Click to collapse
tranbeelze said:
Yep, i happened the same problem after my phone reboot :crying:
Click to expand...
Click to collapse
Yes guys, it's true. but same problem with the custom rom that we add effects to their secsettings. I think may be a solution. I will try to adjust its
Where is the keyguard.apk note 4 Chinese
I do not share at the moment.
Envoyé de mon SM-T230
Djimmy said:
I do not share at the moment.
Envoyé de mon SM-T230
Click to expand...
Click to collapse
excuse me, I juz want to know how to active charge effect and festival effect on secsetting.apk note 4? can u guide me please? Thanks!
for festival effects. just make animated screen. customized by Samsung. and keyguard for loading effects. that's all I can offer you.
Thanks a lot
Any similar apk oit there for lollipop? I'm guessing this one isn't compatible...
Disclaimer
First of all, this is not my work. This is work of boykinhdi. I'm just sharing this with the community
His original post can be found Here
Install at your own risk. I take no responsibility. I have tested it on my D800. Its working fine.
Features
Rom was developed on the G3 Lollipop Stock D85520f
Run international standards, removed lots of things that is not used to optimize the system.
TWEAKS
Latest from XDA Optimization (thank toJanek)
Add Walkman (thank @ izbaned7)
Add ViPER4Android mod = Pon3Control (thank to @ Michean1995)
Add Dolby Digital Plus (Huwei XDA)
Add Rootexplore 3.3.2
Add TitaniumBackup
And one of the essential app dabble rom (dont know what that is)
New Updated google apps
Add root busybox
ADD ONS
PC Connection
Connection Tethering
Connection LG software
QuickCircle
Pop & Plug
T-Action
Call Record
NETWORKS
GSM / WCDMA / LTE / Auto
GSM / WCDMA / Auto
WCDMA / Only
Gsm / Only
INSTALLATION PROCEDURE
Flash Rom either BKD final rom Simple ROM 1.2 and then install using TWRP Recovery 2831 at least.Installation does not support 4.xx
Full wipe (Dalvik, Cache, System, Data)
Install Rom system reboot Done!
DOWNLOAD
Capacity 1023,92MB
LINK Fshare:
Mod Edit
LINK Mega
https://mega.co.nz/#!0stXDCYQ!QD5hopTMj81-IuWU1Zhpu4E8Nwu1BqHipcWdO0sMIfY
SCREENSHOT
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It also has dual window as i can see from the pictures?
Velogr1992 said:
It also has dual window as i can see from the pictures?
Click to expand...
Click to collapse
Yes it is dual window. I've tested that.
I'll give it a shot...5.0.1 rom?
Thanks
Does the ROM on a 802?
its work on d802? and need install jailbreak bootloader or kk?
jakowskim said:
its work on d802? and need install jailbreak bootloader or kk?
Click to expand...
Click to collapse
Works on d802. Still I would recommend reading the OP here. Just translate it to English (using google translate etc)
Not sure about bootloader.
I was on SimpleROM Grola v1.2. and I just wiped and installed this ROM in TWRP.
Whatever the bootloader on SimpleROM Grola requires. It works on that.
Installed a few mins ago on D802 Int, currently setting up and restoring, came from 802 Lillipp rls (stock) - wiped all and installed this rom
After install i get massive LGSmardCardService has stopped workin, didn't need that so i deleted it
Will report back more later
fire3d said:
Installed a few mins ago on D802 Int, currently setting up and restoring, came from 802 Lillipp rls (stock) - wiped all and installed this rom
After install i get massive LGSmardCardService has stopped workin, didn't need that so i deleted it
Will report back more later
Click to expand...
Click to collapse
You was under stock lollipop right? Could you explain which bootloader/baseband/stuff like this you flashed please ?
it is for all variants lg g2 ?,,,,, my unit is the D801
Works on d801 too.
If anyone wants to install xposed then disable lg weather and lgsmartcover.
Also, xposed module g3tweaksbox works great on this ROM
Sent from my LG-D800 using XDA Free mobile app
AhmedRana said:
Works on d801 too.
If anyone wants to install xposed then disable lg weather and lgsmartcover.
Also, xposed module g3tweaksbox works great on this ROM
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Any special stuff installed beisde the ROM?
Quite worry about the slow charging problem.
casual_kikoo said:
You was under stock lollipop right? Could you explain which bootloader/baseband/stuff like this you flashed please ?
Click to expand...
Click to collapse
i used this as base http://forum.xda-developers.com/lg-g2/general/official-lg-g2-android-5-0-lolipop-t3046813
official lp D802d
rooted, installed twrp, wiped the device and installed this rom
From what i have ssen for now it works well and has the normal lollipop battery darin, i have one issue, the microphone seems way to low, for
"Ok Google" i really have to cream into the device .......
Also, the Google Search App don't let me setup the function to listen on any screen .....
fire3d said:
i used this as base http://forum.xda-developers.com/lg-g2/general/official-lg-g2-android-5-0-lolipop-t3046813
official lp D802d
rooted, installed twrp, wiped the device and installed this rom
From what i have ssen for now it works well and has the normal lollipop battery darin, i have one issue, the microphone seems way to low, for
"Ok Google" i really have to cream into the device .......
Also, the Google Search App don't let me setup the function to listen on any screen .....
Click to expand...
Click to collapse
ok, thanks dude!
Anyone try this on d803?
Sent from my LG-D803 using XDA Free mobile app
A mod to have the smartcover stock ? (No circle but rectangular)
samtab37 said:
A mod to have the smartcover stock ? (No circle but rectangular)
Click to expand...
Click to collapse
Delete.
No luck installing on my D801. I tried first from rooted V30B but it stayed on the LG Logo for 15+ minutes with only a slow flashing LED. I was able to get back into recovery and restore my backup but I'm anxious to give this G3 port a try.
Sent from my LG-D801 using XDA Free mobile app
A question guys: does the LG flash tool works with this ROM? I want to be sure that I can return to stock if anything wrongs happened
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the new Project Fi LVY48F 5.1.1 stock ROM. The rom has simply been rooted and made flashable by @jermaine151. This is based on @Stephen's prior work. So is this thread OP. lol
Rom Features
-Stock Android 5.1.1 Project Fi LVY48F base
-Rooted
-Busybox
-No force encrypt kernel
-Persistent ADB enabled
-Custom DPI set at 460
Flash instructions
1. Download ROM from link below
2. Backup current ROM
3. Flash ROM using TWRP*
4. Profit?
*For best results clean wipe but may not be needed if coming from a previous build.
Disclaimer
We are not responsible for any damage done to your device, either hardware or software. You use this ROM at your own risk. We will try to help resolve any issues you have, but we make no guarantees in doing so.
Download
LVY48F_Odxed_Stock.zip
Custom DPI
LVY48F_Odxed_Stock.zip
Mirror
MD5: 5a7a592b210cd17d7b18810b719bc9ac
Radios, Bootloaders, and More:
[FXZ][OTA] Nexus 6 Recovery Flashable Fastboot Files (Unlocked Bootloader Only)
Scroll down to "LVY48F (5.1.1 Project Fi bugfix update 20150910)" and "Click to Show Content." These can be flashed in custom recoveries.
Suggested Mods:
Xposed
GravityBox
Nexus 6 Double-Tap to Wake
Lightflow Lite or Lightflow Full*
*Lightflow Tutorial
If anyone has other mods to suggest, feel free. These are the ones I use and they work great with this ROM.
Thanks @GuyInDogSuit!!
@GuyInDogSuit yes, I changed my DPI. Sorry about that.
Cheers, I will close my thread off now, as this is newer. Thanks for hosting.
jermaine151 said:
Thanks @GuyInDogSuit!!
@GuyInDogSuit yes, I changed my DPI. Sorry about that.
Click to expand...
Click to collapse
Is it set to 460? That's what ROM Toolbox is telling me.
Just flashed this and everything looks to be working great. Thanks again for doing this, the upgrade prompts were driving me bonkers. I did notice the dpi change and I like it. Much cleaner.
Sent from my Nexus 6 using Tapatalk
Anyone get Android Pay working on this?
can you have one with the Stock DPI please appreciate it and thx
Sent from my Nexus 6 using Tapatalk
davemlinux said:
can you have one with the Stock DPI please appreciate it and thx
Click to expand...
Click to collapse
I don't know how to change it other than with an app once it's flashed.
apristel said:
Anyone get Android Pay working on this?
Click to expand...
Click to collapse
I have Android Pay working on the official LVY48F image, but I'm pretty sure the DPI change that was done with this will not work with it. Also had to hold off on rooting until after it was set up.
Sorry guys. I didn't mean to change it in the rom. I just wanted it set to 460 on my phone. I can give you a different build.prop file or correct it and upload again. Give me a second and I'll upload a correct build and a 2nd flashable zip to correct dpi only.
EDIT: Attached is the flashable zip to set the density to 560 which is stock. I am uploading the full ROM with it corrected and I will post the link here when it's done.
P.S. If someone tries the attached zip, please post and confirm that it fixed your DPI. Thanks!
Here's the link to the same build with the stock 560 DPI: http://d-h.st/K2Ee
thx boss the way o wanted appreciate it
Sent from my Nexus 6 using Tapatalk
I'm getting a system update notification. Go ahead, or ignore?
whiskeymcirish said:
I'm getting a system update notification. Go ahead, or ignore?
Click to expand...
Click to collapse
You shouldn't be receiving an update message is you're running this build. Check your settings about and make sure that your build number is LVY48F. The update will fail if you try to accept it.
I got the update notification when I first booted but have not seen it since.
Was running the wrong version, 48C, my bad. Thanks guys.
whiskeymcirish said:
I'm getting a system update notification. Go ahead, or ignore?
Click to expand...
Click to collapse
If you ever get another one, don't update. It'll fail if you have a custom recovery. Even if you had stock recovery, you'll then lose root and be encrypted again. Wait for a ROM update.
^^ what he said, learned that the hard way
Sent from my Nexus 6 using Tapatalk
GuyInDogSuit said:
If you ever get another one, don't update. It'll fail if you have a custom recovery. Even if you had stock recovery, you'll then lose root and be encrypted again. Wait for a ROM update.
Click to expand...
Click to collapse
I think it'll fail even if you're so much as rooted.
#WhiteUIsMustDie, #EndDarkAppOppression
Hello everyone,
I'm running into an issue here, I flashed this ROM so I could activate my Project Fi invite. Unfortunately, I am getting the same message as I've gotten on every other ROM. First, I will get error T301 and cannot do anything I'm the app. Eventually I get around it by attempting to choose network operators in the settings but get stuck at the part where I am trying to transfer my number. After typing in all the account info and selecting next, I get a notification at the bottom of the screen that reads "something went wrong".
I've been wondering, do I need to flash any of the radios, base (baseband?), or any other of the things that are linked in the OP? If so, which ones?
P.S. I have never flashed a different radio or bootloader etc. on this phone since I purchased in May.
If that's not the case does anyone have any idea what could be the issue? Any help is highly appreciated and I thank you in advance!
Sent from my Nexus 6 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First of all I would like to thank for @gharrington are exellent job is to be fantastic mod
Threads Here
Code:
[B][COLOR="Red"]testing at your own risk!
I do not have yet this phone so I do not tested !!
making sure to backup! before flashing MODS
only DEODEX ROM!![/COLOR][/B]
Hi all, I recently the ZTE Axon 7 A2017U
Download : 3Minit Battery Mod - ZTE Axon 7 A2017U
MD5 : bce435fb254acb94c5fb5d63c649de23
INSTALLATION
1-*Install - Important! - 3MinitBatterySettings.apk
2-*Download the 3Minit Battery Mod - ZTE Axon 7 A2017U* zip file, copy it to your SD card or internal memory.
3-*Reboot into recovery mode and flash the zip and ENJOY !!
If you like do not forget to hit the thank buttons !!
Tried on the A2017U...
Got a message saying this version was out of date (popped up 3 or 4 times after I hit OK), then the app crashed. I tried it again, got the same message but it let me go to the battery selection. I chose the green circle, but nothing happened, then it crashed again. I tried it one more time, chose the green circle and a charging animation, and it crashed again....So I removed it with Tbiu.
I applied the most APPLICATION
I DO NOT UNDERSTAND WHY IS THIS ERROR
tele_jas said:
Tried on the A2017U...
Got a message saying this version was out of date (popped up 3 or 4 times after I hit OK), then the app crashed. I tried it again, got the same message but it let me go to the battery selection. I chose the green circle, but nothing happened, then it crashed again. I tried it one more time, chose the green circle and a charging animation, and it crashed again....So I removed it with Tbiu.
Click to expand...
Click to collapse
ok I think I see the problem in 5 minutes I'll add versions test2
S3V3N said:
ok I think I see the problem in 5 minutes I'll add versions test2
Click to expand...
Click to collapse
I didn't get the "out of date" warning, and it didn't crash...But nothing happened when I chose the battery I wanted. But, I am on A2017U (not the G version), so not sure that makes a difference?
I do know that DrakenFX had been trying to add this to his ROM, but never got it to work. Something to do with the stock UI?
SS can do from the desktop?
S3V3N said:
SS can do from the desktop?
Click to expand...
Click to collapse
Hopefully someone else will give it a try and offer more feedback?
Thank your for this, even if it doesn't work on my phone. It's a start!
I tried getting this to work a month ago with no success. If I may ask which XML files you made your edits? The normal ones you edit were not working due to ZTE have there own custom edits for there battery interface. The @id/battery already has a dip figure added so changing that according to the instructions did not change anything. Anyways thanks for your contribution. I am unable to test. I have the United States version with the latest 30 build so I am unable to test your zip.
---------- Post added at 06:35 AM ---------- Previous post was at 06:31 AM ----------
tele_jas said:
I didn't get the "out of date" warning, and it didn't crash...But nothing happened when I chose the battery I wanted. But, I am on A2017U (not the G version), so not sure that makes a difference?
I do know that DrakenFX had been trying to add this to his ROM, but never got it to work. Something to do with the stock UI?
Click to expand...
Click to collapse
This zip should flash a deodexed version of the system file which would be a big difference between the USA model and the G. Long story short is why you are getting the error. If the OP let's me know which files specifically he edited I already have the files for the united states deodexed and ready to go. Me and two others were trying to figure this out a month ago or so.
Please send me SystemUI_ZTE version of U
edit )))))
S3V3N said:
I think there is a problem
red - problem
green - my changes
I need to gather and buy this phone .... terribly It fascinates me: D
Click to expand...
Click to collapse
Thanks for the info and here
http://www.mediafire.com/?79dch06482d7x39
The ZTE system should be deodexed already, I don't have access to my computer that is where someone linked my the U version deodexed ?
neo4uo said:
Thanks for the info and here
http://www.mediafire.com/?79dch06482d7x39
The ZTE system should be deodexed already, I don't have access to my computer that is where someone linked my the U version deodexed
Click to expand...
Click to collapse
Test for U in first post
S3V3N said:
Test for U in first post
Click to expand...
Click to collapse
The paid app keeps freezing
but what I'm interested in pay version?
I'm interested if it works correctly!
S3V3N said:
but what I'm interested in pay version?
I'm interested if it works correctly!
Click to expand...
Click to collapse
I installed it and it won't work unless u buy the paid version. When I paid for app I was able to change battery but app would freeze sometimes.
I know for what, is to fix in 5 minutes
S3V3N said:
Test for U in first post
Click to expand...
Click to collapse
Works like a charm man, thanks bunches! I do use the paid version so I am unaware of any problems with the free version.
Here's a screenshot
ok, all errors fix soon
The final version for 2017U in the first post.
Please carefully read the User's installation!