Hi friends,
I recently bought a few magnetic charging cables. I was wondering if there are any cases out there that have a magnetic port cut out. Thanks!
keithljh said:
Hi friends,
I recently bought a few magnetic charging cables. I was wondering if there are any cases out there that have a magnetic port cut out. Thanks!
Click to expand...
Click to collapse
There are plenty available. Google, Amazon, Ebay etc and youll find some
Related
Hi
Can anyone recommend an ebay jobby aftermarket cradle
i've seen a few on ebay, but wanted to know people thoughts on the different types (owners only please)
Thanks
m.r.davies said:
Hi
Can anyone recommend an ebay jobby aftermarket cradle
i've seen a few on ebay, but wanted to know people thoughts on the different types (owners only please)
Thanks
Click to expand...
Click to collapse
Just bought desktop cradle with some other accessories bundle at ebay.
http://cgi.ebay.com.sg/ws/eBayISAPI.dll?ViewItem&item=370151123238
I think this is a pretty good deal.
i see from brando.com having also some nice deaktop cradle but then its pretty expensive IMO
Thanks for the link, is there any charger that will charge with the silicon case still on?
m.r.davies said:
Hi
Can anyone recommend an ebay jobby aftermarket cradle
i've seen a few on ebay, but wanted to know people thoughts on the different types (owners only please)
Thanks
Click to expand...
Click to collapse
Which country will you want it posted to?
United Kingdom.
saayinla said:
United Kingdom.
Click to expand...
Click to collapse
For UK buyers there's MobileFun.
They sell both types which are the correct one's for the Touch HD (not the badly fitted one's that you can find elsewhere).
See here for the cheaper HTC Touch Desktop CHarging Cradle.
See here for the dearer Deluxe HTC Touch HD Desktop Charging Cradle.
I have both.
Note: Both are much cheaper than Expansys.
saayinla said:
Thanks for the link, is there any charger that will charge with the silicon case still on?
Click to expand...
Click to collapse
my desktop cradle from ebay finally arrive today in a nice small box.
http://cgi.ebay.com.sg/ws/eBayISAPI.dll?ViewItem&item=370151123238
You may want to see the items bundle with the purchase.
i tested immediately by charging the battery and syncing the touch HD without any delay. I would say the cradle is nicely built. I tested the cradle by putting my touch HD in the silicon case and plug it in and it still fit nicely into the cradle and syncing as well. (I need some additional force to push it in due to the thickness of the silicon i have) But it will be effortless for me to sync the HD if i remove the silicon case.
No regrets buying the cradle. The only useless thing i feel is the pouch that came with it. Its simply too tight, Must tighter than the original touch HD pouch. I have a problem pushing the phone into it.
But in anyway the cradle is great!
Thanks for the feedback, are you using the grey transparent silicon case from ebay?
saayinla said:
Thanks for the feedback, are you using the grey transparent silicon case from ebay?
Click to expand...
Click to collapse
no... i didnt got my silicon case from ebay. i got it locally. Its a clear type transparent silicon .
I had another leather pouch which i also switches around to use....
Can you plug in a standard adapter into the cradle? It looks like it uses a UK adapter to another adapter for that cradle..
What is the battery like that comes with it too? It seems quite a cheap price
alander said:
Can you plug in a standard adapter into the cradle? It looks like it uses a UK adapter to another adapter for that cradle..
What is the battery like that comes with it too? It seems quite a cheap price
Click to expand...
Click to collapse
As for the adapter, I did not use the one that is provided. I uses my old dopod 900 charging adapter instead. Its the same voltage and also uses USB.
The battery is 1350mAh. So far been using it on my phone and so far so good.
There's a coincidence - I ordered the exact same thing a week or so ago. Waiting on delivery at the moment, but I'm happy to see that there's another user that thinks it was worth it.
Could Anyone advise a model with audio out ?
thanks !
Cradle
Hello,
could somebody please name the manufacturer of this cradle? I'm from Germany and I would be pleased not having to buy it from the UK. I didn't find anything similar in german shops yet.
Regards,
namelessrabbit
namelessrabbit said:
Hello,
could somebody please name the manufacturer of this cradle? I'm from Germany and I would be pleased not having to buy it from the UK. I didn't find anything similar in german shops yet.
Regards,
namelessrabbit
Click to expand...
Click to collapse
I have both this case and the Deluxe one manufactured by Kidigi.com.
I can say that the case you mention does not have a manufacturers name, only HTC Touch HD.
I can say though that both cases are excellent.
i know its slightly off topic, but are the spare batteries sold on ebay with the cradles any good.. how long do they hold their charge?
namelessrabbit said:
Hello,
could somebody please name the manufacturer of this cradle? I'm from Germany and I would be pleased not having to buy it from the UK. I didn't find anything similar in german shops yet.
Regards,
namelessrabbit
Click to expand...
Click to collapse
you can this websit
www.kidigi.com
maybe you need it
if you know more
please contact me msn:[email protected] skype:yyue819
spring819 said:
you can this websit
www.kidigi.com
maybe you need it
if you know more
please contact me msn:[email protected] skype:yyue819
Click to expand...
Click to collapse
Did you not read my post only two posts above yours?
Heads up for anyone after a cradle for their Jade,
I have just bought one for £5.00 (£4.99 + £0.01 for postage), not official type but a bargain for the money, usual Ebay price for copies £15-20.
http://www.superetrader.co.uk/adapt...-battery-charger-for-htc-touch-3g-p-4137.html
siddys said:
Heads up for anyone after a cradle for their Jade,
I have just bought one for £5.00 (£4.99 + £0.01 for postage), not official type but a bargain for the money, usual Ebay price for copies £15-20.
See www.supertrader.co.uk
Click to expand...
Click to collapse
Hey
The link seems to be broken . Could you confirm?
Cheers.
......... OK found it.
Here is the link. Isn't Google wonderful.
There isn't any back support to the phone. I am be concerned having just the mini pin and tiny bit of the phone 'Holding' it upright. Could it damage the mini usb port?
Anyone who has used?
NCS said:
Hey
The link seems to be broken . Could you confirm?
Cheers.
......... OK found it.
Here is the link. Isn't Google wonderful.
There isn't any back support to the phone. I am be concerned having just the mini pin and tiny bit of the phone 'Holding' it upright. Could it damage the mini usb port?
Anyone who has used?
Click to expand...
Click to collapse
I am expecting delivery of the cradle today, i will let you know what is like
Cheers
Received, used for a few days its fine
Phone even fits in (snuggly) with silicone cover on
Hi I was wondering if any body has done this but you could do it your self. I bought my magnetic cable on ebay for 9.88+ shipping the magnet was weak to attach it to the phone so I decided to make a dock with my magnetic cable and some hard foam from 99C store
Well done! Seems to be better than the original that doesn't allow any case...
Sent from my C6802 using Tapatalk 4
if you look at it has a case but since you'r doing it your self you can make it as you want it/need it
jaime4272 said:
Hi I was wondering if any body has done this but you could do it your self. I bought my magnetic cable on ebay for 8.95+ shipping the magnet was weak to attach it to the phone so I decided to make a dock with my magnetic cable and some hard foam from 99C store
Click to expand...
Click to collapse
can you share the link of item you purchased "magnetic cable" from ebay ?
first off I bought it on this website [ http://www.netimes.com/shop/magnetic-usb-charging-cable-for-sony-xperia-z-ultra-xl39h-p-4975.html ] not on ebay sorry! and you'll see the green sticker. well that is covering the sony logo. just to let you know
Also note that the official dock is literally just a hunk of plastic with the standard cable captured inside. Really, if you need a spare cable you can remove the bottom and lift the cable out whole.
Great!!!! I have been looking for this before
Sent from my C6802 using xda app-developers app
Anyone found a cheaper source for the magnetic power cable? ~$10 for a cable is pretty expensive.
Would a Z1 charging case fit the Z2? I can't find a charging case for Z2.
tyw7 said:
Would a Z1 charging case fit the Z2? I can't find a charging case for Z2.
Click to expand...
Click to collapse
Since no fitted Z1 case fits the Z2 if say it's safe to assume not. Handtec & Clove have OEM wireless charging cases listed but no pics yet.
pauley said:
Since no fitted Z1 case fits the Z2 if say it's safe to assume not. Handtec & Clove have OEM wireless charging cases listed but no pics yet.
Click to expand...
Click to collapse
So with additional battery? Link?
tyw7 said:
So with additional battery? Link?
Click to expand...
Click to collapse
They don't have details yet on them other then it's a wireless charging case to charge on a charging pad.
http://m.clove.co.uk/sony-xperia-z2-wcr12-wireless-charging-cover-black
http://m.clove.co.uk/sony-xperia-z2-wcr12-wireless-charging-cover-white
I haven't seen any of the better-known brands offering a extended battery case yet. Maybe once it's rolled out worldwide.
DiY charger case
That Sony case is planned to be relatively expensive ~85 Euro
I'm thinking of building my own QI charger case,
my idea in a nutshell;
- buy cheap magnetic charging cable and Qi wireless charger receiver for eg Samsung S3 at dx.com
- rip apart the magnetic cable to only save the magnetic part and the contacts
- Solder the contacts with thin wires to the Qi receiver.
- Fiddle this all nice and snug in a wallet style cover
The old Battery case for the Z1 fits the phone. The ports are off though.
Hi guys.
Will the ringke fusion case work with magnetic chargers like dk36 and dk45? Both without any cutting or something?
I see it has cutout for magnetic cable but not sure about the charging dockd
Thanks
DforDesign said:
Hi guys.
Will the ringke fusion case work with magnetic chargers like dk36 and dk45? Both without any cutting or something?
I see it has cutout for magnetic cable but not sure about the charging dockd
Thanks
Click to expand...
Click to collapse
It has a really big gap there, so you should be fine.
I need to be sure but thanks.
Anyone using such combo?
DforDesign said:
I need to be sure but thanks.
Anyone using such combo?
Click to expand...
Click to collapse
I have the case, the part of the case near the magnetic area is almost like a cord in the front and there's the back plate behind with no siding in between at all, so you should be fine.