hello guys
sorry for my bad English.
i have a LG P760 for about 6 months, bought it second hand from a friend. the phone had troubles from the beginning with starting up. every time when you started the phone, it couldn't get any furder than the lg logo, so i had to take out the battery, and start the phone again, this happened several times before the lg started.
last time i had this problem, it took me forever, placed the battery like 30 times in and out, so i did a factory reset, but while resetting, the phone died, and i wasn't able to get it back on.. not even with the special key combinations. so i searched around the net for a solution and found one. but when i tried and connected the phone to the pc with a usb cabel holding the up button, i got errors of coprocessor and omap4430, so i installed them both, and tried again. so now the omap4430 keeps connecting and disconnecting, so i can't connect my lg to the pc..
plz help me..
cheerz
pc:
windows 7 ultimate 64-bit
AMD Phenom II X4 955 3.2GHz
Radeon HD 7790 Direct CU II OC 1GB
4GB RAM
Ok. This can probably be fixed with a recovery update. Make sure you have the latest lg mobile support tool installed on your pc. Then, power your phone off. I should say that after doing this, it WILL wipe EVERYTHING off your phone... so back up your contacts somehow. So, once youve got the support thing on your pc, open that up. Now plug the usb end of your charging cable to your pc. While holding the UP volume button on your l9, plug in the phone end. Don't do anything until the software upgrade screen pops up on your phone. Then let go of VOL +. Your pc should be installing drivers now, wait till those are done if any. Once the lg support tool says your phone is connected, there should be a drop down in the top right. Click that and click the recovery update option. (I think thats what its called, you should figure it out) then let it work its magic and once your phone reboots you should be set. What this did is wiped the phone COMPLETELY, and reinstalls the OS. Good luck!
Sent from my LG-P769 using XDA Free mobile app
Bacon_Noodles said:
Ok. This can probably be fixed with a recovery update. Make sure you have the latest lg mobile support tool installed on your pc. Then, power your phone off. I should say that after doing this, it WILL wipe EVERYTHING off your phone... so back up your contacts somehow. So, once youve got the support thing on your pc, open that up. Now plug the usb end of your charging cable to your pc. While holding the UP volume button on your l9, plug in the phone end. Don't do anything until the software upgrade screen pops up on your phone. Then let go of VOL +. Your pc should be installing drivers now, wait till those are done if any. Once the lg support tool says your phone is connected, there should be a drop down in the top right. Click that and click the recovery update option. (I think thats what its called, you should figure it out) then let it work its magic and once your phone reboots you should be set. What this did is wiped the phone COMPLETELY, and reinstalls the OS. Good luck!
Sent from my LG-P769 using XDA Free mobile app
Click to expand...
Click to collapse
first of all, thanks for the reply! but i think you miss understood the problem here. since the phone died, it does not respond on anything.. could it be that the phone fully bricked? when i open lg mobile support tool, and plug it into usb, with the up botton to get in to SW mode like you say, the phone keeps connecting and disconnecting.. on lg support tool, there is nothing happening.. just connecting and disconnecting like 10-12 times...
You might want to look into what installing fastboot drivers imply, if I recall correctly they include drivers for the omap4430 device, once you can get into fastboot and hopefully have your device show up there in your PC screen, you might be able to push a custom recovery or try to reboot the phone via commands.
Its one of those issues you need to be there to try and fix, sorry if I'm not helping much.
Sent from my LG-P768 using XDA Premium 4 mobile app
plz, someone help me
Xkore16 said:
plz, someone help me
Click to expand...
Click to collapse
Hi Xkore16, you could try this way http://forum.xda-developers.com/showthread.php?p=53709440
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
BajoPrimate said:
Hi Xkore16, you could try this way http://forum.xda-developers.com/showthread.php?p=53709440
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
Hi, thanx for the replie, but it didn't work either
Omap keeps connecting and disconnecting
help plz..
Xkore16 said:
Hi, thanx for the replie, but it didn't work either
Omap keeps connecting and disconnecting
help plz..
Click to expand...
Click to collapse
You're welcome, Xkore16, but you don't need omap with the method provided by me,
?you need LGE CDMA USB Serial Port (COM#). ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
thanx, and indeed, i haven't.
does it mather wich (COM) version it is?
Xkore16 said:
thanx, and indeed, i haven't.
does it mather wich (COM) version it is?
Click to expand...
Click to collapse
You're welcome, Xkore16;
I'm not sure, but I think it depends on your computer and your used ports, anyway, the important thing is to change it to 41.
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
BajoPrimate said:
You're welcome, Xkore16;
I'm not sure, but I think it depends on your computer and your used ports, anyway, the important thing is to change it to 41.
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
I don't have LGE CDMA USB Serial Port.. it is not there under device manager/ports
is there any way to install this port manually?
Xkore16 said:
I don't have LGE CDMA USB Serial Port.. it is not there under device manager/ports
is there any way to install this port manually?
Click to expand...
Click to collapse
Hi Xkore16, you have a link in the OP https://m.app.box.com/view_shared/32c5t7fj2w8xcwr0krjo
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
Related
- Was using Free X10 Beta 4, Changed Brightness Settings, Phone crashes
- It will not turn on, but it does vibrate when holding the power on button
- The Phone is recognised by USB and comes up with the Green Light although
does not update in SEUS - "Product Cannot Be Identified" (I've deleted/replaced blob_fs, still same problem)
- Attempted to update firmware with PC Companion, Does not work, "Download Error"
- I've also attempted to installed a generic firmware through Flashtool, whilst it takes a very long time to flash it finishes although phone remains not working after.
What is wrong? I've simply changed brightness settings and it's crashed. Please help me get my phone working, I need it urgently.
This has happened once before although I've been able to reflash the firmware via SEUS although this time it isn't identifying my phone.
How was your battery level?
Ive never heard about this situation in particular but i believe if you search there are threads on unbricking an x10. Take a look around the forums and search unbrick x10 and see what you get.
Sent from my X10i using XDA App
Battery level was near 100%.
The Search seems to be down, could anyone link me to an unbricking tutorial on here?
Thanks.
Bump..
Unbricking method doesn't work (just flashing via Flashtool with generic firmware). On top of that it takes ages to flash via this method for some reason.
Anyone have any idea what the problem is?? The phone should be working fine, all I did was change the brightness setting and then it crashed.
foxhound494 said:
Bump..
Unbricking method doesn't work (just flashing via Flashtool with generic firmware). On top of that it takes ages to flash via this method for some reason.
Anyone have any idea what the problem is?? The phone should be working fine, all I did was change the brightness setting and then it crashed.
Click to expand...
Click to collapse
it doesn't matter if U can access to flash mode. if u can, so before connect ur phone to computer, in SEUS Support zone =>start=>update software => start, then press blue letter "repair phone", wait until it ask for coonect phone in flash mode
Flash it with generic .sin files by flash tool......before that wipe total system.....
it should work....
kanchigo said:
it doesn't matter if U can access to flash mode. if u can, so before connect ur phone to computer, in SEUS Support zone =>start=>update software => start, then press blue letter "repair phone", wait until it ask for coonect phone in flash mode
Click to expand...
Click to collapse
I get the following error:
Download error unable to download your phone software. please check your internet connection or try again later
subhankar.ds said:
Flash it with generic .sin files by flash tool......before that wipe total system.....
it should work....
Click to expand...
Click to collapse
I've tried flashing several times, still doesn't work when finished. Not to mention it takes a good 2hours plus.
foxhound494 said:
I get the following error:
Download error unable to download your phone software. please check your internet connection or try again later
I've tried flashing several times, still doesn't work when finished. Not to mention it takes a good 2hours plus.
Click to expand...
Click to collapse
there are somthing wrong with ur comp. U'd better try again on other comp. install Companion and try repair it
foxhound494 said:
I've tried flashing several times, still doesn't work when finished. Not to mention it takes a good 2hours plus.
Click to expand...
Click to collapse
Can you post the flash tool log file?
kanchigo said:
there are somthing wrong with ur comp. U'd better try again on other comp. install Companion and try repair it
Click to expand...
Click to collapse
Uninstalled PC Companion and reinstalled it although same problem.
subhankar.ds said:
Can you post the flash tool log file?
Click to expand...
Click to collapse
I can't right now because I closed the Flash Tool although when it gets to flashing System it disconnects and the LED turns red, it then proceeds to saying everything has finished, disconnect phone and turn on.
Is your usb cable okay? maybe the problem is your usb cable. As of right now its IMPOSSIBLE to brick the X10 due to the bootloader not being cracked. The only problem can be your programs, cable, or maybe you dropped your X10 one to many times.
If you do get it sorted, you cant set brightness to auto, will cause a crash. This was highlighted in z's original freex10 thread.
Sent from my X10i using XDA App
Mister J said:
Is your usb cable okay? maybe the problem is your usb cable. As of right now its IMPOSSIBLE to brick the X10 due to the bootloader not being cracked. The only problem can be your programs, cable, or maybe you dropped your X10 one to many times.
Click to expand...
Click to collapse
It's not my programs, cables or computer as I've just flashed my friends X10 and it worked perfectly. I've never dropped my phone, It's done this after changing brightness setting on FreeX10 Beta 4.
It's also not the battery as I've tried using a friends battery and still the same problem.
foxhound494 said:
I can't right now because I closed the Flash Tool although when it gets to flashing System it disconnects and the LED turns red, it then proceeds to saying everything has finished, disconnect phone and turn on.
Click to expand...
Click to collapse
I believe, your data cable/port is faulty....
Check it with another data cable/repair the data port...
subhankar.ds said:
I believe, your data cable/port is faulty....
Check it with another data cable/repair the data port...
Click to expand...
Click to collapse
I flashed another X10 using this exact cable/port and it worked fine.
It can't be the data cable/port.
SEUS
remove SEUS, go to SE site, download ONLY device specific software, and it will only include the must recent SE x10 update, and try that. good
denenatse said:
remove SEUS, go to SE site, download ONLY device specific software, and it will only include the must recent SE x10 update, and try that. good
Click to expand...
Click to collapse
Followed steps. Frozen on "Checking connected phone". I don't think anyone will be able to help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
battery
remove battery for five seconds just before you connect and flash mode simultaneously.
denenatse said:
remove battery for five seconds just before you connect and flash mode simultaneously.
Click to expand...
Click to collapse
Same old problem. Failed to detect product. I've been trying to fix this phone for nearly a week now. Still nothing.
Xrecovery
reaching, but you wouldn't happen to have xrecovery installed? i say try repair phone once more with SE site if SEUS doesn't work. how far does it boot? anything?
Hello
is there any chance a kind person can help me with this dead stick?
a few information about this phone:
- as far as i was told, the phone died after an update
- when i plug the phone to the charger nothing appears on screen
- when i power the phone nothing happens
- when i volume up + power the phone nothing happen, same with volume down + power and volume up+down+power
i have installed the lg tools and using the imei downloaded a 600+MB package which should be the restore image of the phone but when the procedure starts to flash the image it gets stuck at 4% trying to connect to phone without any luck
if anyone has some ideas to give i would be very happy to try them!
the phone is dead. does it get hot when you connect it to the charger for some minutes? if yes, then it has shorted inside and you have to replace/repair it. same thing happened to my p765 and i had to get it replaced from lg.
Did you try to remove battery for a longer time and put it back? You can also try to remove SIM and SD card before inserting the battery.
thanks both of you for the replys.. makes me happy to be able to discuss this problem with someone..
i have been doing more testing. this are the new things i found out..
i have discharged the original battery by using it on a small circuit i have.. i then tested it with the tester and it was really low.. then i placed it back in the phone and left the phone charging all night to see if it would heat as noob.gamer said but it didn't.
interesting thing is that the battery is now charged again.. so i opened up the phone to look with the tester inside it..
looks like the charging microusb port works.. i can read about 5V on the pcb right where the connector is.. then i can read 3.3V right where the batter connect is.. when it is under charging, on the battery connector i can read much more than 3.3V which makes me suppose that the pcb is able to charge the battery afterall..
i just really can't understand why this thing doesn't give any sign of life.. power and volume buttons seem to close well when i press them, i can hear a small click.
is it possible that the phone motherboard can still charge the battery but has burned components on it?
components don't look very neat tbh, they all seems to have a black melt around.. here are some pics i did with another phone, sorry for quality
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hope you can see what i mean, some chips have rounded borders and seem to have left some black liquid around them
Are you able to go in SW Upgrade Mode?
Roker1 said:
Are you able to go in SW Upgrade Mode?
Click to expand...
Click to collapse
sorry, how can i do this?
do i have to enter software upgrade mode to be able to use the LG tools correctly? because this might explain why i wasn't able to flash it when i tried..
You have to press vol+ and then connect to usb(holding vol+), of course you have to be in SW Upgrade mode to get lg tool working
After you connected it, open LG tool and wait that it recognizes the phone
Roker1 said:
You have to press vol+ and then connect to usb(holding vol+), of course you have to be in SW Upgrade mode to get lg tool working
After you connected it, open LG tool and wait that it recognizes the phone
Click to expand...
Click to collapse
bah, sorry.. i have actually found a proper guide now here on xda.
so unfortunately i think i have a bigger problem here.. i have downloaded the universal lg drivers and installed them on a new computer, just to be sure to do everything from scratch correctly this time, and i then downloaded the lg support tools.
i started the tools which say the phone is not connected.. i then connected the usb to the pc.. then pressed vol+ and while it was pressed inserted the microusb to the phone. i tried it twice with the battery on and twice without the battery on.. (sd and sim are not in the phone)
unfortunately windows (xp) doesn't seem to recognize any device and doesn't install nothing. no new peripherals are detected in the device manager.
the lg suppor tools keep saying that the device is not attached and this btw was what i had with the other computer (when i just connected the phone without going into sw upgrade mode)..
Try to install drivers from lg tool, just to be sure that are right.
You should try also with another pc (win7) if you have this possibility, its strange that the tool doesnt recognize your phone in SW Upgrade Mode
Roker1 said:
Try to install drivers from lg tool, just to be sure that are right.
You should try also with another pc (win7) if you have this possibility, its strange that the tool doesnt recognize your phone in SW Upgrade Mode
Click to expand...
Click to collapse
i think there isn't much left to this phone sadly..
as you suggested i tried on another windows pc, this time 7.. i started directly the lg support tools and clicked on install drivers.. choose the lgp760 drivers and it downloaded them and installed them.. then i tried connecting the phone to the pc with the vol+ button pressed but nothing happens still..
is this sw upgrade mode suppose to start even without the battery?
edit: i tried rebooting the pc but still nothing has changed..
mstation86 said:
i think there isn't much left to this phone sadly..
as you suggested i tried on another windows pc, this time 7.. i started directly the lg support tools and clicked on install drivers.. choose the lgp760 drivers and it downloaded them and installed them.. then i tried connecting the phone to the pc with the vol+ button pressed but nothing happens still..
is this sw upgrade mode suppose to start even without the battery?
Click to expand...
Click to collapse
I dont know, try, if you read SW Upgrade Mode on the screen it means its possible also without battery (i did this always with battery in)
can u tell how ur phone died..? while updating sw or rooting or it died due to heating?
devilanuj17 said:
can u tell how ur phone died..? while updating sw or rooting or it died due to heating?
Click to expand...
Click to collapse
actually the phone is not mine. the person who gave it to me just told me this exact words:
"i was using the phone and received an update.. i downloaded it and installed it.. then i used the phone a 2 days and then it didn't work anymore."
this is all unfortunately.
when i try to start in sw update mode, nothing appears on screen.. i don't even hear the phone vibrating or making sounds.. nothing at all.
really looks totally dead.
try claiming the warranty. ..? and dnt mention root dev kdz words to them..just go ang say what your friend told u exact lines..and if u had open the lg l9 then pls screw it well and undetectable..and if possible..try sending a girl/older age(max 40 lol) woman to the lg service centre representatives..cuz they wont doubt a female doin root\black ops stuff on the phone..
remember there's a limit to xda work. .and that ends at hardware problems.
mstation86 said:
actually the phone is not mine. the person who gave it to me just told me this exact words:
"i was using the phone and received an update.. i downloaded it and installed it.. then i used the phone a 2 days and then it didn't work anymore."
this is all unfortunately.
when i try to start in sw update mode, nothing appears on screen.. i don't even hear the phone vibrating or making sounds.. nothing at all.
really looks totally dead.
Click to expand...
Click to collapse
Funny thing, my p760 died yesterday with about the same symptoms and no way to get any vital sign of it. With the difference that the last update I did was like 3-4 weeks ago.
In my case seems like the back-top area gets a bit warm when charging, but I would say that just the usual. It might be, like someone said, a short circuit.
I guess it will not be a problem claiming the warranty and getting a new one. However I will not take the thing apart to be sure.
If you remove the phone battery and then, plug your phone to your computer, is there any signal on the USB port ? For example, on Windows, you should here a sound like if a device was plugged, unplugged, then plugged again, unplugged...
See this thread for more information :
http://forum.xda-developers.com/showthread.php?t=2119090
If you don't have at least this reaction, you can assume the phone is really dead. Otherwise, you have probably a software issue with the bootloader or an hardware issue with the phone battery.
OperationNT said:
If you remove the phone battery and then, plug your phone to your computer, is there any signal on the USB port ? For example, on Windows, you should here a sound like if a device was plugged, unplugged, then plugged again, unplugged...
See this thread for more information :
http://forum.xda-developers.com/showthread.php?t=2119090
If you don't have at least this reaction, you can assume the phone is really dead. Otherwise, you have probably a software issue with the bootloader or an hardware issue with the phone battery.
Click to expand...
Click to collapse
My bad, it is actually alive, and exactly as you said. I guess i didn´t press the combination properly :S. Seems like I might be able to update via "LG Support Tool" (vol+/power/usb). But first I need to try a backup, I would like to keep at least some photos I have on the phone.
Lets see if the sync software is able to do it...
---------- Post added at 05:32 PM ---------- Previous post was at 05:18 PM ----------
:/ As I expected the PC-sync software did not connect. And I don´t see any option to backup with the "support tool". Any options?
I suppose, the internal memory is just a memory card and I could just copy directly from the card, but I don´t want to take the phone apart (just in case a have to make use of the warranty in the end...)
Thanks in advance.
---------- Edit ----------
Well, the thing didn´t work out in the end. I tried upgrading with the "LG Support Tool" but the process never went further than 4%.
I will just return it, and I hope to get it back soon (or a new one... or whatever). In the meantime I can go back with my always reliable N5800
lg l9 p760
OperationNT said:
If you remove the phone battery and then, plug your phone to your computer, is there any signal on the USB port ? For example, on Windows, you should here a sound like if a device was plugged, unplugged, then plugged again, unplugged...
See this thread for more information :
http://forum.xda-developers.com/showthread.php?t=2119090
If you don't have at least this reaction, you can assume the phone is really dead. Otherwise, you have probably a software issue with the bootloader or an hardware issue with the phone battery.
Click to expand...
Click to collapse
Hello my friend,
I have this problem with my l9 and when i connect it with pc there is that continiously sound of plugged, unplugged, plugged, unplugged.
I used fastboot and everyting goos good till i come to the questions that you have to answer with y/n then i get every time FAILED <remote partition does not exist>.
You can see it on the picture
I hope you can help me
And sorry for my bad english
mstation86 said:
Hello
is there any chance a kind person can help me with this dead stick?
a few information about this phone:
- as far as i was told, the phone died after an update
- when i plug the phone to the charger nothing appears on screen
- when i power the phone nothing happens
- when i volume up + power the phone nothing happen, same with volume down + power and volume up+down+power
i have installed the lg tools and using the imei downloaded a 600+MB package which should be the restore image of the phone but when the procedure starts to flash the image it gets stuck at 4% trying to connect to phone without any luck
if anyone has some ideas to give i would be very happy to try them!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2292828
pls help
Hi, please advice I have LG-P760 and is completely dead, and it does not respond to the charger only when you press the volume + and connect the USB to the computer detects the device but immediately disconnects and connects again and again and again so it can be repaired? thanks
Hi guys, i have installed root on my phone with apk and then i flashad recovery with the other apk in developement forum, and when i try to flash any rom like latest nigtly cyanogen or pac true, i received an error installation aborted status 7.... i have jelly bean on my lg l9 p760
Edoardo001 said:
Hi guys, i have installed root on my phone with apk and then i flashad recovery with the other apk in developement forum, and when i try to flash any rom like latest nigtly cyanogen or pac true, i received an error installation aborted status 7.... i have jelly bean on my lg l9 p760
Click to expand...
Click to collapse
Hell edoardo,
Have you unlocked bootloader of your phone. You must unlock bootloader, if you want to flash a custom rom.
Sent from my LG-P765 using xda premium
gdjindal said:
Hell edoardo,
Have you unlocked bootloader of your phone. You must unlock bootloader, if you want to flash a custom rom.
Sent from my LG-P765 using xda premium
Click to expand...
Click to collapse
Ok Man, but i have a problem, my phone doesn't boot.when i turn on my phone appears a white screen whit a text"Cryptography in progress"(not exactly i'm italian this is my translation for "Criptazione in corso"... with a button"reset phone" but when i do it it doesn't work... in sw mode to flash a firmware stock with no brand my pc with win 7/8 and my pc with win xp 32 gives me an error(Phone was not found) i installed driver lg united launched windows enabled clicked to on and launch program with emergency mode but nothing work...
Does exist any way to unlock the bootloader with recovery o in sw mode?
please my phone needs your help. does the warrantly fix it?
Sorry for my bad inglish im disperated
Edoardo001 said:
Ok Man, but i have a problem, my phone doesn't boot.when i turn on my phone appears a white screen whit a text"Cryptography in progress"(not exactly i'm italian this is my translation for "Criptazione in corso"... with a button"reset phone" but when i do it it doesn't work... in sw mode to flash a firmware stock with no brand my pc with win 7/8 and my pc with win xp 32 gives me an error(Phone was not found) i installed driver lg united launched windows enabled clicked to on and launch program with emergency mode but nothing work...
Does exist any way to unlock the bootloader with recovery o in sw mode?
please my phone needs your help. does the warrantly fix it?
Sorry for my bad inglish im disperated
Click to expand...
Click to collapse
Can you do offline flash? If so please read http://forum.xda-developers.com/showthread.php?t=2411265
If not, I think you should use LG mobile support tool to recover your phone.
- Boot you phone in S/W upload mode. To do this, turn off your phone, take off battery, hold down vol- button while re-connect ubs cable wait about 5-8 sec. After S/W update screen appear insert you battery. (You may need to install LG usb driver first)
- Open LG mobile support. (if it's not installed, search for it and download from lg site, http://tool.xcdn.gdms.lge.com/client/app/B2CAppSetup.exe)
- LG mobile support should show your phone info
- Select Customer Support > Recover
- And wait for program to download and flash your phone (1 - 2 hours)
Thanks man... Im trying and tell you if work
Sent from my Galaxy Nexus using xda app-developers app
My pc read my phone as lge modem... i tryed to disistall driver from devices manager and control panel reinstalling but it's the same phone was not found with the procedure offline fix please someone tell me how to install correclty lg l9 driver im disperated, this phone is of my best friend she's very annoyed
Edoardo001 said:
My pc read my phone as lge modem... i tryed to disistall driver from devices manager and control panel reinstalling but it's the same phone was not found with the procedure offline fix please someone tell me how to install correclty lg l9 driver im disperated, this phone is of my best friend she's very annoyed
Click to expand...
Click to collapse
It may easier to use LG mobile support tool than offline flash. If you want to recover it back please try that first. If you install LG usb driver it should work fine.
You can download usb driver from LG website, this is for my phone http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425. may be it compatible with yours.
artit said:
It may easier to use LG mobile support tool than offline flash. If you want to recover it back please try that first. If you install LG usb driver it should work fine.
You can download usb driver from LG website, this is for my phone http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425. may be it compatible with yours.
Click to expand...
Click to collapse
Thanks for your help lg mobile support send me this error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Translation for"impossibile procedere a causa di errori sconosciuti"=In English"impossible to continue due to unknown error"
Please help me your link is normal driver i installed yet
Edit
When i unplug usb cable appear error 13% connect the battery charger with 2 optition cancel and use battery when i touch user battery i can change the setting, i activated lg software mode,option for installing apk out of play store, but i have same error"Port(or Device Not found)"
Edoardo001 said:
Thanks for your help lg mobile support send me this error
Translation for"impossibile procedere a causa di errori sconosciuti"=In English"impossible to continue due to unknown error"
Please help me your link is normal driver i installed yet
Edit
When i unplug usb cable appear error 13% connect the battery charger with 2 optition cancel and use battery when i touch user battery i can change the setting, i activated lg software mode,option for installing apk out of play store, but i have same error"Port(or Device Not found)"
Click to expand...
Click to collapse
So you can boot your phone up or not? And while you use recover tool your phone was in S/W update mode or LG software mode.
If it in S/W update mode, LG mobile support tool should able to show your phone information. Try to use other usb port. Maybe if you can give more information of what steps you did, other member may able to point out what I miss.
artit said:
So you can boot your phone up or not? And while you use recover tool your phone was in S/W update mode or LG software mode.
If it in S/W update mode, LG mobile support tool should able to show your phone information. Try to use other usb port. Maybe if you can give more information of what steps you did, other member may able to point out what I miss.
Click to expand...
Click to collapse
Changed mode in software lg, activate usb debug and 3th party apps work fine phone boot ok... but for flash nobrand 20C lg update have issue phone was not found
Edoardo001 said:
Changed mode in software lg, activate usb debug and 3th party apps work fine phone boot ok... but for flash nobrand 20C lg update have issue phone was not found
Click to expand...
Click to collapse
It shouldn't found your phone. Because in JB LG flash tool cannot detect our L9 phone. If you want to flash kdz, you have to flash ICS u-boot/x-loader first. Please use Lelus fastboot script to flash it. http://forum.xda-developers.com/showthread.php?t=2292828
select option for your P760 phone and read howto in readme file. You must install fastboot driver first.
Edoardo001 said:
Changed mode in software lg, activate usb debug and 3th party apps work fine phone boot ok... but for flash nobrand 20C lg update have issue phone was not found
Click to expand...
Click to collapse
Solved
Solution for all have this problem:
1 disistall driver and reboot computer
2 install driver
3 connect the phone in only charge mode
2 connect the phone in mtp and wait windows driver recognition
3 connect the phone in camera mode and wait driver recognition
4 connect the phone in software lg mode and wait driver recognition
now your phone work like a charm
I've seen this before myself
Edoardo001 said:
Thanks for your help lg mobile support send me this error
Translation for"impossibile procedere a causa di errori sconosciuti"=In English"impossible to continue due to unknown error"
Please help me your link is normal driver i installed yet
Edit
When i unplug usb cable appear error 13% connect the battery charger with 2 optition cancel and use battery when i touch user battery i can change the setting, i activated lg software mode,option for installing apk out of play store, but i have same error"Port(or Device Not found)"
Click to expand...
Click to collapse
The "impossible to continue" error has arisen for me on occasions when I tried to flash a ROM which was incompatible with the device. Try another ROM.
same problem,thank you
Sorry, I don't follow this thread anymore and don't keep the files online anymore. There are several other threads to be found.
Softbricked? Don't worry, you can fix it if you can read.
Download all the files and extract zips.
Install drivers and LGFlashTool (Flashtool will install to path C:\LG\LGFlashTool)
Add the unzipped tot (firmware) and Megalock dll file to the LGFlashTool folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Put phone in download mode: Turn phone off, push and hold volume up and plug USB cable into phone
Open device manager (Windows Start>control panel>device manager)
Select Port connection for phone (COM and LPT>LGE Android Net for VZW USB Serial Port)
Change the port to COM41 (Right click on the specified port, select properties, left click port setting tab. Click advanced. Change COM Port Number to COM41. Click OK. Click OK.
If you don't see the phone, click View in Device Manager, then click Show Hidden.
Start LGFlashtool. Specify the dll and tot to flash by checking "Select manual mode." Left click the "..." button and select the dll. Left click the "Add" button and select the tot. Click OK to close the file selection window.
Click the yellow arrow and wait patiently. Loading the firmware takes a few.
View attachment 2870130
When FlashTool shows Ready, disconnect the phone for ~5 secs. Upon reconnecting the phone, FlashTool will automatically run. This will take a few moments, so go get a cup of coffee. When the phone shows a blue screen with a bid red 3, you're good to go. Disconnect the phone and pull the battery briefly. Restart the phone and redo the setup. Shutdown Flashtool to prevent any accidents when rerooting.
New LG G3 for you and me! [emoji106][emoji106][emoji106]
Here is an alternate method using KDZ developed for people who took the C update.
http://forum.xda-developers.com/showthread.php?t=
[emoji12]
Reserved.
Thanks to @216Monster and @droidkevlar for the additional download sites and support.
There are several other guides that cover this process in various forums. This is written from my experience after soft bricking with a build prop edit without knowing how to get back to stock first. I hope this guide makes it easier for folks in the same Big Red boat.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
I installed the driver on my work computer which is Windows XP and this is what I get in the device manager, it doesn't recognize it although I am connected to the computer in download mode. I have the Verizon LG G3 so I even tried to install the dedicated Verizon drivers that I found in this thread and still no go. Please help on finding drivers for windows XP.
Eyalkn said:
I installed the driver on my work computer which is Windows XP and this is what I get in the device manager, it doesn't recognize it although I am connected to the computer in download mode. I have the Verizon LG G3 so I even tried to install the dedicated Verizon drivers that I found in this thread and still no go. Please help on finding drivers for windows XP.
Click to expand...
Click to collapse
I got that and then I unplugged the USB, waited a few seconds and plugged it back in and it then showed under communications.
lexluthor said:
I got that and then I unplugged the USB, waited a few seconds and plugged it back in and it then showed under communications.
Click to expand...
Click to collapse
Thank you it worked and I am back
ins5736 said:
Softbricked? Don't worry, you can fix it if you can read.
Downloads:
https://drive.google.com/folderview?id=0B7379qhBA5bnVWQwLU9GNkk3ZGs&usp=sharing
http://www.mediafire.com/download/6...22jjhk7g3kgz/LG_G3_VS985_10B_03_Stock_TOT.zip
http://fs1.androidfilesharing.com/d123f6f2cfa13038
Download all the files and extract zips.
Install drivers and LGFlashTool (Flashtool will install to path C:\LG\LGFlashTool)
Click to expand...
Click to collapse
Couldn't get the flashtool to download. One file is an .ink file and nothing happens when i try to download the flashtool at the right of the screen.
Edit: Got the files downloaded, when I run flashtool without a device attached it has a login screen, I'm assuming this won't occur if the phone is hooked up to it?
dlscott1111 said:
Couldn't get the flashtool to download. One file is an .ink file and nothing happens when i try to download the flashtool at the right of the screen.
Edit: Got the files downloaded, when I run flashtool without a device attached it has a login screen, I'm assuming this won't occur if the phone is hooked up to it?
Click to expand...
Click to collapse
Yes.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
I am an experienced Android hacker, and still got a bit lost with the tutorial. While I appreciate the excellent work here, you might consider editing/adding the information to help clarify the following:
1. The TOT file at http://www.mediafire.com/download/6i..._Stock_TOT.zip, https://drive.google.com/folderview?id=0B7379qhBA5bnVWQwLU9GNkk3ZGs&usp=sharing, and http://fs1.androidfilesharing.com/d123f6f2cfa13038 are all identical - and we only need one or the other. Please identify the other TOT links as mirrors to the same file, so people aren't downloading all of them unnecessarily (especially as they each are so very large).
2. There is already a MegaLock.dll file installed in the LGFlashTool folder once the application is installed. When you say add .dll files to the LGFlashTool folder, please clarify if MegaLock.dll needs to be overwritten by the other file with the same name (found in Setup_LGFlashTool_1.8.1.1023.zip), or otherwise. It might also help to clarify specifically which dll files are moving to the LGFlashTool folder, and from where. I ended up overwriting the default MegaLock.dll with the one you provided before I started the process...
3. Ports won't often show in Device Manager unless you go to View and then Show Hidden Devices in the Device Manager application.
4. After clicking the yellow arrow, unplugging and plugging the phone back in did nothing to start the process. Nor did plugging it back in while holding volume up (like in your 2nd step). I had to unplug, power the phone on, and then when the red Verizon screen appeared I plugged back in. This triggered the start of the Flash process. An easy way to tell you're in the right spot during the process: the red Verizon screen will disappear and a Firmware Updating screen will pop up to show you progress on the phone. When done, the phone will power cycle automatically...then, after a few other brief items, the red "3" on the blue screen will appear.
WARNING: Don't forget to close the LGFlashTool on your PC when you're done. Because...if you have anything else to do during the same session (such as rooting the phone), when you power cycle the phone while it's still plugged into your PC, LGFlashTool will take over and proceed to flash your phone again!!
Thanks again for your hard work. The tutorial was indeed helpful.
hijax2001 said:
Thanks again for your hard work. The tutorial was indeed helpful.
Click to expand...
Click to collapse
Thanks for the feedback. OP modified.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
Sorry if this has been answered in one of the other threads on this topic, but does this reset the root flag/counter like it did on the g2? Thanks.
tom1226 said:
Sorry if this has been answered in one of the other threads on this topic, but does this reset the root flag/counter like it did on the g2? Thanks.
Click to expand...
Click to collapse
As far as I know, but I rerooted immediately.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
ins5736 said:
As far as I know, but I rerooted immediately.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
Click to expand...
Click to collapse
Haha thanks. Just curious in case something goes funky hardware-wise. My g2 screen went wonky after a few months and I had to warranty it, unrooting was easy. Hope this pulls through if I ever need to!
Thank you so much for this you saved my ass. I tried to restore my original build.prop but forgot to fix permissions and it totally bricked my phone D:
ins5736 said:
Softbricked? Don't worry, you can fix it if you can read.
New LG G3 for you and me! :thumbup::thumbup::thumbup:
Click to expand...
Click to collapse
>>>FIXED, SEE BELOW
I'm trying this and I am stuck. Got all files downloaded, installed lg tool and got to the point of restarting the phone into download mode. No problem there. Issue is I can't find the COM ports in the device manager. Running Windows 8.1 pro, don't see a section for the COM ports. I do see CDC EM, CDC Serial and LGE Android Phone, but when I right click, there is no PORT option to change....
I know I am getting close if I can just figure how to change the port on the device manager.
Any help?
update>>>when i double click the lge android phone in dev mgr, it says drivers are not installed. I have installed drivers. I also tried removing drivers and rebooting then reinstalling drivers, same thing. It shows up but looks like it can't find the right drivers.
>>>>FIXED. Removed lg flash tool. Removed drivers. rebooted. reinstalled everything. plugged in the usb and phone showed up this time, was able to change to com41 and it worked. Not sure what happened but it worked flawless this time...
THANK YOU!!!
Thanks
viper3two said:
>>>FIXED, SEE BELOW
I'm trying this and I am stuck. Got all files downloaded, installed lg tool and got to the point of restarting the phone into download mode. No problem there. Issue is I can't find the COM ports in the device manager. Running Windows 8.1 pro, don't see a section for the COM ports....Removed lg flash tool. Removed drivers. rebooted. reinstalled everything. plugged in the usb and phone showed up this time, was able to change to com41 and it worked. Not sure what happened but it worked flawless this time...
THANK YOU!!!
Thanks
Click to expand...
Click to collapse
Glad you got it sorted! The second law of IT support (unistall and start over) saves the day again.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
ins5736 said:
Glad you got it sorted! The second law of IT support (unistall and start over) saves the day again.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
Click to expand...
Click to collapse
LOL!! Yea Im an IT manager so I know that one for sure. If all else fails, reboot or uninstall and start over!
Thanks again for this method, it worked out great. Glad to know I got a fallback if I jack something up
Tony
Quick question, apologies if it's idiotic -- basically I (stupidly, it turns out) tried to change my VZW boot animation. No dice. But now I can't get the old one back to working again, which is buggin me out.
QUESTION: Would reflashing to stock in the manner described in this thread completely restore the phone, including that boot animation? I'm just crazy enough about this to actually do it, if it'd work.
Thanks A TON for any info.
marlowe310 said:
Quick question, apologies if it's idiotic -- basically I (stupidly, it turns out) tried to change my VZW boot animation. No dice. But now I can't get the old one back to working again, which is buggin me out.
QUESTION: Would reflashing to stock in the manner described in this thread completely restore the phone, including that boot animation? I'm just crazy enough about this to actually do it, if it'd work.
Thanks A TON for any info.
Click to expand...
Click to collapse
I would think. I'm new to the g3, but I think this is a tool to restore to stock out of the box. Relating to an Odin restore with Samsung. Someone correct me if I'm wrong.
Sent from my VS985 4G using XDA Free mobile app
It would work. You might want to look around for the boot ani first though.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
Hello,
I have unlocked bootloader to install new cwm 13 for LG G2 Mini [D620r] and after that point wifi stopped working. Even if I set up static IP address, it doesn't work. With static IP it connects but without any internet connection. I've tried visit website without DNS (I used IP address), but without any result. It's completely offline.
This occured on 5.0.2 updated stock rom and I have also installed cwm 13 and the same problem.
Any ideas, tips to solve this?
Thank you.
You seem to have, somehow, corrupted the partition that controls the WiFi interface (I can't remember which one it is).
Flash a kdz to fix it.
Sent from my LG G2 Mini using XDA Labs
Vagelis1608 said:
You seem to have, somehow, corrupted the partition that controls the WiFi interface (I can't remember which one it is).
Flash a kdz to fix it.
Sent from my LG G2 Mini using XDA Labs
Click to expand...
Click to collapse
Flashed stock 5.0.2 v20c kdz via flashtool from here:
http://forum.xda-developers.com/g2-mini/development/stock-v20c-dec-2015-flashable-zip-kdz-t3284847
But still it doesn't work :crying:
I can't even root it.
Tried towelroot, kingroot, enabled mobile data, tried this method:
http://forum.xda-developers.com/showthread.php?t=2732311
but there I ended up at last step booting into stock e3 recovery. It failed, only dead android logo showed up.
Please help me :crying:
Zemtriz said:
Flashed stock 5.0.2 v20c kdz via flashtool from here:
http://forum.xda-developers.com/g2-mini/development/stock-v20c-dec-2015-flashable-zip-kdz-t3284847
But still it doesn't work :crying:
I can't even root it.
Tried towelroot, kingroot, enabled mobile data, tried this method:
http://forum.xda-developers.com/showthread.php?t=2732311
but there I ended up at last step booting into stock e3 recovery. It failed, only dead android logo showed up.
Please help me :crying:
Click to expand...
Click to collapse
Have you tried with another router?
Sent from my LG G2 Mini using XDA Labs
Vagelis1608 said:
Have you tried with another router?
Sent from my LG G2 Mini using XDA Labs
Click to expand...
Click to collapse
My router is fine. I checked also next two AP brands and nothing. It is the same.
It cannot connect. And if you set static IP, it will connect but without anything else. Connected but no data transfer. No internet connection.
EDIT: Rooted with Kingoroot app via computer (so I don't need to use mobile data )
Now I can install twrp but wifi doesn't work.
EDIT 2 (to sum it up ):
Model: D620r
Step 1: Flashed D620r20d KDZ: http://forum.xda-developers.com/showpost.php?p=66253546&postcount=12
Step 2: Rooted with Kingo Root via PC
Step 3: Unlocked bootloader: http://forum.xda-developers.com/g2-mini/development/bootloader-d620-d618-t3127819
Step 4: Installed TWRP 3.0.2 with Rashr: http://forum.xda-developers.com/g2-mini/development/unified-twrp-recovery-3-0-0-lg-g2-mini-t3311316
Step 5: Flashed new kernel v2.1.1: http://forum.xda-developers.com/g2-mini/development/kernel-stock-kernel-modded-ramdisk-t3082562
If installing another ROM, I wiped whole device except external sd card
On my router RB450G (which deals with whole traffic at home) I see IP address offer for my device but mobile phone doesn't respond. Maybe it looks like it send data but doesn't receive.
RB450G is non-wifi router but canyon (wifi router) is only set up as AP like bridge mode. So it doesn't do anything else except AP
I remind that all this happened after I unlocked bootloader.
I'm realy disapointed of that phone :crying:
What is the state of SELinux?
Sent from my LG G2 Mini using XDA Labs
Vagelis1608 said:
What is the state of SELinux?
Sent from my LG G2 Mini using XDA Labs
Click to expand...
Click to collapse
I think this is the end.
I have bricked it today trying to load new bootloader using script to do it now. But script was designed to load d618.... so... I can't get it into bootloader.
EDIT 1:
I've tried puffed old samsung battery which is charged 2.75V what means it is below 0%.
I could get battery display on screen with 0% on it, beep sound on computer but after 5 seconds it disconnected. (No COM port detected in device manager)
UPDATE: I can get lg logo on 1 second, see battery warning (all upside down).
I discharged battery by connecting it on my laser pointer It discharged a bit too fast...
Also after 1 second LG logo display, it then beeps a sound like when you connect phone on charger, then it vibrates and then it keeps connecting and disconnecting but no com port.
Then it looks like it loaded wrong bootloader (d618) or whatever and when I press power button, I see charging screen. Here is a photo for better imagination:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Zemtriz said:
UPDATE: I can get lg logo on 1 second, see battery warning (all upside down).
I discharged battery by connecting it on my laser pointer It discharged a bit too fast...
Also after 1 second LG logo display, it then beeps a sound like when you connect phone on charger, then it vibrates and then it keeps connecting and disconnecting but no com port.
Then it looks like it loaded wrong bootloader (d618) or whatever and when I press power button, I see charging screen. Here is a photo for better imagination:
Click to expand...
Click to collapse
http://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896
Sent from my LG G2 Mini using XDA Labs
Vagelis1608 said:
http://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896
Sent from my LG G2 Mini using XDA Labs
Click to expand...
Click to collapse
Doesn't work. I've connected it again on laser diode, till it didn't shut down.
After voltage maybe around 2.60 - 2.65V I couldn't meassure voltage. Showed 0V, laser diode was still on, then soon it died. So I was sure it was 0%.
Then I've tried to connect it to the computer and nothing. Only battery icon showed, then disappeared, plug/unplug sound.
With that guide I should see bootloader text to press volume up button again.
But my situation is that my bootloader is wrong. It never ever show anything.
Also I've tried to connect it on linux but I couldn't see devices drives. /sd*
https://youtu.be/9-FD18euqH4
I will upload next two videos to see upside down battery charging On video it's maybe not too low voltage, but I tried it before with lower voltage.
And on one video is my computer randomly beeping info sound, because friend started to spam me...
https://youtu.be/JstRUb9gK-4
https://youtu.be/6TEhDWnX9bI