hi everyone,
my problem that I can't get my sola connected to PC.
I have downloaded mtpapgb.apk from google and install it. but still nothing I can't connect
does anyone have any idea how to install it or at least how to make my sola connect to pc?
I have tried most of triks with no luck
also different PC's, still nothing just charging
Thanks in advance
Bye
There are simply too many answer for your question. Please be more specific and give more detail. Are you using win7? Win8? Have you install proper driver into your pc? Is your rom stock? If not, maybe you need to setup usb connection in setting>storage. Or else maybe that rom is having issue with mtp. Lastly are you sure your usb cable in good condition? Sometimes even good cable can be seen faulty because of bad connection like dust accumulation, etc.
Sent from my Xperia P using XDA Premium 4 mobile app
Some things to be checked:
Have you try using another cable data?
Have you install the proper driver for XSola in the PC?
Have you try to connect in MSC mode?
Hope this helps
kopter3161 said:
There are simply too many answer for your question. Please be more specific and give more detail. Are you using win7? Win8? Have you install proper driver into your pc? Is your rom stock? If not, maybe you need to setup usb connection in setting>storage. Or else maybe that rom is having issue with mtp. Lastly are you sure your usb cable in good condition? Sometimes even good cable can be seen faulty because of bad connection like dust accumulation, etc.
Sent from my Xperia P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi
my mobile ISC 4 (original Rom) (rooted)
all drivers installed and uninstalled many times without any change (mobile is not recognized by PC even in flash mode)
I have tried different cables (still not working), where same cables are working with my Samsung tab
different OS 7 and XP and PC's (not working).
also tired to reset mobile phone (not working)
my question now how I can install a new ROM without Cable. where CWM is not installed
Thanks in advance
Hmm thats weird. Im sorry I cannot help you any further. And its impossible to flash any rom without recovery and flashmode afaik. Can you get into fastboot?
Sent from my Xperia P using XDA Premium 4 mobile app
ScarletAzure said:
Some things to be checked:
Have you try using another cable data?
Have you install the proper driver for XSola in the PC?
Have you try to connect in MSC mode?
Hope this helps
Click to expand...
Click to collapse
thanks mate,
I have tried everything possible, but still not working.
now looking for installing new ROM without USB
Thanks
kopter3161 said:
Hmm thats weird. Im sorry I cannot help you any further. And its impossible to flash any rom without recovery and flashmode afaik. Can you get into fastboot?
Sent from my Xperia P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
with cable no. I can't (not recognized).
I wonder if anyone here can help me.
Related
Whenever I connect my SGS3 to my pc running windows 7 , it shows usb device not recognized.. I have installed the usb drivers... I reinstalled it to make sure.. Still this shows.. I cannot copy files into my device nor can I flash a firmware. What should I do ?? Is anyone else experiencing the same problem ?? Sorry for creating this thread.. But I thought this is important !!!!
THANKS IN ADVANCE
qwertyedu said:
Whenever I connect my SGS3 to my pc running windows 7 , it shows usb device not recognized.. I have installed the usb drivers... I reinstalled it to make sure.. Still this shows.. I cannot copy files into my device nor can I flash a firmware. What should I do ?? Is anyone else experiencing the same problem ?? Sorry for creating this thread.. But I thought this is important !!!!
THANKS IN ADVANCE
Click to expand...
Click to collapse
i have the same problem with my archos 80g9.
when i asked in here i was told that it was most likely a damaged cable.
not sure though as i dont have another cable to test this theory
Did you try to change from MTP to PTP when you connect your phone?
Connect phone notification connexion usb pc click on it and change to see if it works...
Every question should be on Q/A section.
Sent from my GT-I9300 using Tapatalk 2
Instal pdanet.exe
Sent from my GT-I9300 using xda app-developers app
No, I dint change mtp to ptp !!! and I dint follow the second sentence of your reply !
Im in some serious **** here. I was on CM10 136 and everything was working fine. Today,i decided to update to whatever FXP released. When I tried connecting to the PC,my phone would just charge,not connect,as in,no pop up to ask if I wanted to connect my phone in Mass Storage. This is extremely weird because everything was working just fine and i've flashed like,a LOT of times,different ROMs and different kernels. And YES i know how to put my phone into flash mode and the drivers are all up to date. What is weird is that when I press the back button and insert the phone into the USB hub,the green light flashes just for a mini second and then the phone starts. Same thing happens if i connect in fastboot mode. Ive tried with multiple USB ports. Guys,Im worried sick here. if i take the phone to the service center here in India,they won't understand **** about fastboot/flash mode. Also,Ive already voided my warranty by unlocking the bootloader the official way. Please,please help me.
PS-Ive tried searching for this and a couple of posts have come up with this same problem in other devices such as the X8. Ive also tried disconnecting all other USB devices and still,nothing works.
change other cable?
or maybe your problem :
http://forum.xda-developers.com/showthread.php?t=1901505
megatpanji said:
change other cable?
or maybe your problem :
http://forum.xda-developers.com/showthread.php?t=1901505
Click to expand...
Click to collapse
My wire is fine,I think,because,its the original thing that came with the phone and other phones with micro USB connect to the PC properly. Also,as ive already stated,Ive tried multiple USB ports both on the front and on the back of the PC. The ports areOK because i just bought the motherboard. Thanks for the reply.
Were you able to go to cwm mode.if yes the do a factory reset and all cache before that remove sd card and move Rom files using card reader. Jus a try .
Sent from my MT15i using xda app-developers app
akashavel said:
Were you able to go to cwm mode.if yes the do a factory reset and all cache before that remove sd card and move Rom files using card reader. Jus a try .
Sent from my MT15i using xda app-developers app
Click to expand...
Click to collapse
I wiped my phone completely,it doesn't help. Could you further elaborate moving ROM files? Like,shifting system files onto another storage or something? Is that possible?
I meant to flash some other Rom . Did you try removing battery and then put battery and try flash mode.
Sent from my MT15i using xda app-developers app
akashavel said:
I meant to flash some other Rom . Did you try removing battery and then put battery and try flash mode.
Sent from my MT15i using xda app-developers app
Click to expand...
Click to collapse
Uh yeah,i did remove the battery and reboot the phone and try again. Also,I don't know if it'll help flashing a new ROM with the same kernel. I shall try downloading AOKP or something. The ROM should work since both are JB based kernels. Ill report back.
If it only charges and doesn't connect to pc even in mass storage mode then surely its problem in pc. Have you tried on diff pc?
Sent from my R800i using xda premium
creative_md said:
If it only charges and doesn't connect to pc even in mass storage mode then surely its problem in pc. Have you tried on diff pc?
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Okay so I updated to FXP 138 and it now does go into USB mass storage,but the main problem still exists. it still doesn't go into Fastboot or Flashmode. I don't have a second PC so give me some time to confirm this.
Just try another cable.
Sent from my Xperia Neo using xda premium
SOLVED.
Pheew. I uninstalled the drivers on my PC and then wiped the Dalvik cache via the recovery. Connected it to the PC and bham,SEMC Flash drivers are installed. But if i stayed on flash mode longer than 10 seconds the phone automatically reboots and shows the FreeXperia logo. Something is definitely up with the kernel guys. :\
Flashing back to stock ICS for now. Thank you all for replying,helped me a lot.
Anytime bhai..
Sent from my R800i using xda premium
how i want to fix this matter ? help me guys. " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. " my screen S2 appear this. all time. i cant go anywhere. when i unplug usb cable it blank. cant on. after i plug in usb cable, it appear this. pc cant recognize this driver " OMAP4430 ". im death. please help me.
What have you done dude
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kind of help plss.
llrzall said:
kind of help plss.
Click to expand...
Click to collapse
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kunterk said:
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
llrzall said:
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
Click to expand...
Click to collapse
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Make sure you are flashing the right ROM for your device.........
kunterk said:
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
A similar kind of thing happened to my phone as well when I was upgrading to 4.0.4 from gingerbread via Kies. The installation got stuck when the phone was in the download mode and I had no other option than to disconnect. But yours got stuck while using Odin. I would suggest you to flash the firmware again. I hope your phone goes into download mode now. As for the drivers, uninstall everything related to samsung from your PC and then reinstall it. DO NOT UPGRADE SAMSUNG KIES IF IT ASKS YOU TO DO SO! AS I TOLD YOU A SIMILAR THING HAPPENED TO MY PHONE. MY PC COULD'NT RECOGNIZE IT AND I REINSTALLED EVEYTHING AND IT FINALLY SHOWED SOME SIGN. MAKE SURE YOUR ANTIVIRUS IS FULLY DEACTIVATED WHILE YOU EXECUTE THE FLASHING OPERATION!
leech4 said:
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
Click to expand...
Click to collapse
make senses. but genuine won't make any different, all micro usb cable are the same. i'm using my old Nokia micro usb cable now, and just works fine
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
first of all, while your phone is disconnected from USB cable, can you enter download mode?if no, then try to find someone that have JIG. else, as leech4 said, this might caused by your USB cable. OR might caused by your USB port of your PC. as i said earlier, try to repair your USB driver (not sammy USB driver, but your PC's usb driver). flash using ODIN, and kill kies services from task manager as kies will conflict with ODIN later. here i give you LSJ link(thanks to ApriliaM3) in case you don't have. extract the zip and use all the PDA, PHONE and CSC file. you can even use PIT to re-partition your system. (tested and proven to be working). good luck mate.:good:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
TheATHEiST said:
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
Click to expand...
Click to collapse
LOL. its ur phone? no rite. learn from mistake, make me perfect next time.
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Wow, I suspect this kind of brick or what so ever others called it. I've read some where, and they talking about JIG. If what they mean is the same like what I understood from my electronic knowledge, then you have to find someone that have JIG to do further troubleshooting directly from your board, not via usb. Well, I'm just saying. You might want to seek for other solution first since it's your device.
Cheers
Sent from my GT-I9100 using xda app-developers app
Recently, my phone cannot connect with the USB cables anymore. And I experienced a problem when using my ROM. That is: The Wi-Fi signal won't work. It does not turned on. I contacted the custom ROM developer, they say I must flash a new ROM. Therefore, I am finding a way to install a new kernel into the phone.
littlerabbit506 said:
Recently, my phone cannot connect with the USB cables anymore. And I experienced a problem when using my ROM. That is: The Wi-Fi signal won't work. It does not turned on. I contacted the custom ROM developer, they say I must flash a new ROM. Therefore, I am finding a way to install a new kernel into the phone.
Click to expand...
Click to collapse
No way!!
Sent from my ST27i using xda app-developers app
eswawan said:
No way!!
Sent from my ST27i using xda app-developers app
Click to expand...
Click to collapse
Does that means that I must get the device to the repair center, in order to fix the USB connecting issue ?
littlerabbit506 said:
Does that means that I must get the device to the repair center, in order to fix the USB connecting issue ?
Click to expand...
Click to collapse
Yeah, that's the one and only way.
Sent from my ST27i using xda app-developers app
Have you tried booting into flash mode, and using fastboot to try to detect the phone?
If the phone is detected, you can flash original firmware through flashtool. Follow the general procedures for unbricking your phone.
Or is it some sort of physical port hardware problem?
senhordotempo said:
Have you tried booting into flash mode, and using fastboot to try to detect the phone?
If the phone is detected, you can flash original firmware through flashtool. Follow the general procedures for unbricking your phone.
Or is it some sort of physical port hardware problem?
Click to expand...
Click to collapse
The problem is, I cannot connected to the PC because my USB port on my phone is broken. Therefore I cannot connect my phone to pc
Repair center is the only option.
Hi, I have asked this question few months ago but i couldn't get the answer and also, somehow I couldn't login so I have made the account again and I have been searching around to find out the answer for my problem but I couldn't
I have few questions/issues.
I have Galaxy S3 (GT-9300). I have brought in it New Zealand but it was unlocked phone. So when I did was installing the omega rom, I found out that the rom it had was the rom from one of the europe countries (I can't remember)
I was wondering if I can install any GT-9300 stock rom to get back to stock rom phone or do I somehow have to find out which stock rom it had before?
The other question is that I was trying to reinstall and update the omega rom from the scratch by going to stock rom then installing the latest omega rom. But my phone somehow won't connect to the PC, it charges properly and I know its not the computer or cable 's problem. I have searched and searched on google but couldn't find any solution to resolve that. (Tried different versions of Kies, tried removing everything turning off the phone and restarting, tried to changed to tfs(?) mode and other stuff)
Because of that, I can't use Odin to change Roms or anything. Is there anything I can do to resolve this problem or changing Roms without connecting to the computer?
Currently, I have Omega v54.
Thank you so much
Go read the sticky thread in general forum, how to return to stock.
You can use any firmware for the i9300 but best is the latest for your country.
Sorry but the main problem is that my phone is not getting recognized by the computer so i cant use Odin to do that. Please read the whole contents
Try different versions of drivers.
Sent from my GT-I9300
What do you mean by different drivers?
I have tried all the USB 2.0 and USB 3.0 slots on my pc
but no luck.
The message i am getting is ' USB Device Not Recognized' 'One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message'
You have skipped several steps in the learning process. Go read the sticky thread in general forum, you'll need the correct Samsung drivers to connect your pc with Odin.
I did that while ago, and did that again this morning. uninstalled kies, installed latest Samsung USB driver. but exactly same as before.
same usb error message. and on the device manager, it shows up as unknown device.
another thing I found is that on *#7284# (Service mode) I can only find UART : MODEM, PDA USB: MODEM, PDA. (I have tried this with USB debug mode)
Kies stops Odin from working
Sorry I think you are keep saying the same thing but I DO NOT HAVE Kies. didn't have it for at least 4 months now.
and its the problem with connection to the PC more than going back to stock rom.
Need to resolve the connection problem first to do the Odin step.
please read the messages properly before reply.
jin0616 said:
Sorry I think you are keep saying the same thing but I DO NOT HAVE Kies. didn't have it for at least 4 months now.
and its the problem with connection to the PC more than going back to stock rom.
Need to resolve the connection problem first to do the Odin step.
please read the messages properly before reply.
Click to expand...
Click to collapse
Uninstall all the drivers and try my,magic, drivers
https://www.dropbox.com/s/fhimf3vi737by0n/Samsung-Driver.exe?dl=0
Sent from my Nexus 4 using XDA Free mobile app
Stevica Smederevac said:
Uninstall all the drivers and try my,magic, drivers
https://www.dropbox.com/s/fhimf3vi737by0n/Samsung-Driver.exe?dl=0
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you Thank you so much. Its working. my computer is recognizing the phone. :laugh:
How did you do that? is it a special driver?
Now I can start on going back to stock rom
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
jin0616 said:
Thank you Thank you so much. Its working. my computer is recognizing the phone. :laugh:
How did you do that? is it a special driver?
Now I can start on going back to stock rom
Click to expand...
Click to collapse
Nothing special,just used by me and i know they must work
Sent from my Nexus 4 using XDA Free mobile app
---------- Post added at 22:25 ---------- Previous post was at 22:20 ----------
jin0616 said:
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
Click to expand...
Click to collapse
Then it's something wrong either with usb cable,usb port(on Pc) or ,most likely,micro usb on your phone.
When you insert usb cable into micro usb port,try jerking it up and down,left and right but gently and listen will it make connection for a second,at least.
Sent from my Nexus 4 using XDA Free mobile app
Ok i will try that. This is a stupid question but If the phone port is damaged, is it going to be extra cost to repair that for custom rom installed phones? (i live in new zealand)
jin0616 said:
Ok i will try that. This is a stupid question but If the phone port is damaged, is it going to be extra cost to repair that for custom rom installed phones? (i live in new zealand)
Click to expand...
Click to collapse
If you have warranty,yes but it's 20$ max.
Sent from my Nexus 4 using XDA Free mobile app
jin0616 said:
Oh, It worked for about 5 minutes and it stopped working again.
Only thing I did is opening the phone folder on the computer to see if I can actually see the files. I am not sure why. I have tried to uninstall and install again. but this time not working at all
Click to expand...
Click to collapse
Try another usb cable, another usb port.
Stevica Smederevac said:
If you have warranty,yes but it's 20$ max.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks. I will try to do that when I can get a chance.