Related
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Try root for HaiPai I9220. For me it works.
Having the same problem here, Superoneclick freezes on step 7 iirc.
HaiPai didn't work for me either
So that: http://forum.xda-developers.com/showthread.php?t=1923764
There you will find this: http://www.mediafire.com/view/?othd1gf76pa97zg
It is 100% functional, but need more knowledge and skill.
Ok, I came a lot further this time, but still stuck.
As soon as I let Cygwin `patch` the recovery.img, it does the patching and stuff, but it doesn´t create a new recovery.img for some reason..
If you check page 13 of that PDF manual: I get all the same messages in Cygwin, except for that "Repacking" bit.
Any Idea why it isn't repacking?
Losing my nerves a bit because of Cygwin, what a horrible program to get to work properly. Installation went on beyond 100%, till about 2000% and then just started to count further in negatives >____<
You must have installed 7-zip archive program.
SuperOneClick should work for this device. You may try this:
1) unmount the sd-card, turn ON usb-debugging
2) turn OFF usb-debugging
3) connect device to PC
4) click "Root"
5) when "Waiting for Device" appear turn ON usb-debugging
6) when "Starting ADB Server..." turn OFF usb-debugging
7) then turn it back ON
8) and back OFF
9) repeat this while "Waiting for Device" appears again.
@Stovka: I have 7zip installed, the unpacking/extracting of the recovery.img goes fine in Cygwin, but for some reason it just skips the repack part.
@AndreyETO: As soon as I disable debugging mode, superoneclick stops the procedure, so I didn't get far with that
So sorry, I don't really know what is the problem...
It was all ok for me - the one problem was that I had not installed 7-zip, but after installing it worked exactly according to instructions.
If it were successful: after recording recovery.img to the phone is first necessary to go into CWM mode (no run phone) and install the root file attached. End CWM recovery mode is classically done by clicking on "reboot system now", but after the first time there appears one more option (just I don't know what name), which must be confirmed! Otherwise, when you restart the phone again, then will be loaded the original file and the recovery process must be repeated - upload modified recovery.img and then root file via CWM.
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
Hey, i also tried this, and it didn't work, after clicking on restore that the device restared and than on the comand promp console it said error: device not found, i tried repeating the process several times but it didn't work, any other ideeas?
Neither of those above work for me either.. So... any other suggestions?
Confirmare
sics3th said:
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Click to expand...
Click to collapse
( for P5 allview mtk6577 4.0.4 ics2 )
Search this Root_with_Restore_by_Bin4ry_v15.7 on the forum. It works like a charm (both on linux and windows ).
It use restore feature on the phone.
The link is here http://forum.xda-developers.com/showthread.php?t=1886460
http://forum.xda-developers.com/attachment.php?attachmentid=1398011&d=1350123242
Anyone found a safe way to root this phone? Or maybe a custom rom for this one?
I think it is a great phone which should has a place into xda forum
Root_with_Restore_by_Bin4ry_v15
i have downloaded version 15 of this, because v17 for some reason did not worked...
so go ahead and enjoy.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
i can confirm that this works.
now, can anyone tell how i can make a nandroid for this phone? couldn't find any image to boot with so i can see the partitions and use linux dd
U all can use this metod:http://forum.xda-developers.com/showthread.php?t=1886460 for rooting P5 Mini.
And watch this video tutorial:http://forum.xda-developers.com/showthread.php?p=33470626#post33470626
I rooted my P5 Mini with "Root_with_Restore_by_Bin4ry_v15" and it works fine.
works for P6 also
Flapperbol said:
Found another way to root, and it worked .
Click to expand...
Click to collapse
Same experience on Allview P6 Stony (P6_0201_V1179 software build). This method works for me - similarly I had to run the script (and the reboot cycle) 2x before it had an effect.
As pointers for others, before you try this method you need to make sure you have ADB drivers installed. Trying to install stock google drivers didn't work at all for me, what worked for me was installing latest PdaNet drivers (pdanetZ350.exe) from here: junefabrics.com/android/download.php *
Don't forget to install OTA Rootkeeper app afterwards and run it once - hopefully saves you the hassle of rooting again if the P6 should receive an incremental update.
Enjoy, thanks Flapperbol!
(*= sorry Im not allowed to post links)
Version 18 also works
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
neelz said:
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
Click to expand...
Click to collapse
u can install a new home launcher.i use nova launcher 2.0 prime and u can download icon package and install in nova
I just picked up a Yoga 8 today. did some searching around and found this page instructing how to root it. I was hoping to have a bit more control over the process, but i could not find any other information either through google or through xda. (I realize the thread i linked to is not for yoga 8, but several people said it worked, and when i used it, it did indeed root it)
I would like to experiment with what can be done through the xposed framework with this tablet, but before i go anywhere i want a custom recovery on it so i can do a nandroid backup, should something go wrong. I have not been able to find any custom recovery for this device at all. looking through CWM and TWRP's databases of supported devices, I've come up with nothing. any assistance would be appreciated, whether you know of another recovery (or an unofficial CWM/ TWRP) for the yoga 8 or if you have another method of making/ restoring nandroid backups.
Anybody have this tablet? any success getting a custom recovery running on it?
I picked up one yesterday after spending 3/4 of an hour in front of the stores shelf. I just couldn't really decide which tablet to get. The first thing I've done with it was going online to see how to root. I found a thread where someone posted that using the ideatab method would work on the yoga too. But I was too hesitant because I had just updated the firmware. But it would be great if this little thing would get some developer love.
I have installed CM11 on my old razr HD before handing it down to my wife and already thought about installing it on my note 3.
Rooting is done using Framaroot 1.9.1 (old Framaroot had no Barahir exploit). You can make a backup using MTKDroidTools and you can flash using SP Flash Tools. All tools can be found here at xda-developers. Unfortunately I don't know about a recovery for the time being, I'd like that too
Mikegrmn, I found those parts about rooting tool for the ideatab working on the yoga, and I ran them after updating to lenovos latest firmware. I can say it worked perfectly.
AP756, thanks for the info. Still hoping for custom recovery but at least I can try a few things now.
TWRP for 3G version of B6000-H (( not my work )) >>> https://drive.google.com/file/d/0Bzwq8_00PhMUYmg4ZjlldW9SQXM/edit?usp=sharing
Root, lenovo driver's and knowdelege needed
Edit : picture with battery stat's after rooting and some changes in rom. Managed 20 h of screen on time with 50% brightness, wi-fi always ON and still 28% batt left.
criszz said:
TWRP for 3G version of b6000 (( not my work )) >>> https://drive.google.com/file/d/0Bzwq8_00PhMUYmg4ZjlldW9SQXM/edit?usp=sharing
Root, lenovo driver's and knowdelege needed
Edit : picture with battery stat's after rooting and some changes in rom. Managed 20 h of screen on time with 50% brightness, wi-fi always ON and still 28% batt left.
Click to expand...
Click to collapse
unfortunately I have the non-3G version of the yoga 8 (I dont think the 3G version is available where i am).
I'm wary to try it since it's not the exact same device. I would personally wait for more support to be available for custom stuff.
It will work but let me do more research about it
Sent from HTC One 802w Dual Sim with my hand...
this is TWRP for B6000-F WIFI only >>>> https://drive.google.com/file/d/0Bzwq8_00PhMUTm5uYkdrd19QWE0/edit?usp=sharing
criszz said:
this is TWRP for B6000-F WIFI only >>>> https://drive.google.com/file/d/0Bzwq8_00PhMUTm5uYkdrd19QWE0/edit?usp=sharing
Click to expand...
Click to collapse
tried to install it and completely failed the easy way (running the included batch file). the good news is i have a bit of experience in linux so i opened the batch file for reference of commands needed, transfered the files over adb to the tablet, and then did the rest from there using the commands from the batch file with an android terminal emulator and the hackers keyboard (not required by still awesome). i used ROM manager to reboot to recovery and I AM THERE.
Thanks so much for your help. I am also going to, upon your signature's request, use the thanks button.
Thanks, I'm glad to hear you're fine now. Because bat file didn't worked for you makes me think you don't have driver for processor installed.
Trimis de pe al meu Lenovo B6000-H folosind Tapatalk
I've got the drivers installed properly. i used them to root it and to send the recovery over adb. it coughed back that I didn't have the permissions to copy the file (i was running admin cmd) so i set the default action for SuperSU to allow, i tried again, and it still didn't work.
Either way it is done now and working. i did a backup and copied it to my computer, so i can start playing around with it.
I got one of these last week because I was very curious on the MK-8125 (quad a-7)
http://www.kingoapp.com/android-root.htm
worked for rooting
https://drive.google.com/file/d/0Bzwq8_00PhMUTm5uYkdrd19QWE0/edit?usp=sharing
worked for twrp
what I'm still unable to determine is how to actually enter recovery without sending adb reboot recovery, the VOL + power seems to still enter the chineese recovery. But other than that it's fine and functions correctly.
If someone knows how to replace the default recovery with twrp and the button combo that enters that recovery with power off please advise.
I have my eye on this as well
https://github.com/TeamYogaBlade/android_device_lenovo_b8000
Hopefully adapting the b8000 build to the b6000 won't be that hard once they get it working.
Thanks guys for the info, things are working great so far
johnsongrantr said:
I got one of these last week because I was very curious on the MK-8125 (quad a-7)
http://www.kingoapp.com/android-root.htm
worked for rooting
https://drive.google.com/file/d/0Bzwq8_00PhMUTm5uYkdrd19QWE0/edit?usp=sharing
worked for twrp
what I'm still unable to determine is how to actually enter recovery without sending adb reboot recovery, the VOL + power seems to still enter the chineese recovery. But other than that it's fine and functions correctly.
If someone knows how to replace the default recovery with twrp and the button combo that enters that recovery with power off please advise.
I have my eye on this as well
https://github.com/TeamYogaBlade/android_device_lenovo_b8000
Hopefully adapting the b8000 build to the b6000 won't be that hard once they get it working.
Thanks guys for the info, things are working great so far
Click to expand...
Click to collapse
ROM Manager has the ability to reboot to recovery...or if thats the only thing you need to do, download swift reboot
https://play.google.com/store/apps/details?id=com.Jerry.swift_reboot
I was more looking for a button combo, thinking of a solution to maybe overwrite the correct recovery or something of that nature. But thinking about it, there's probably one recovery built into the boot loader and a separate image as just the recovery maybe? The button combo is proabaly just different areas of the bootloader instead of it redirecting to a different image like what happens on other devices. I think I remember the transformer having this "issue" where it seemed to have two. I'm sure someone will come along with a fix this at some point, it functionally works, just not ideal.
I've got the yoga 8 3G/wifi version. Rooted with farmaroot and installed cwm with mtktools. But I need stock recovery back. Can anyone provide with it cus I don't wanna flash stock os n start all over
johnsongrantr said:
I got one of these last week because I was very curious on the MK-8125 (quad a-7)
http://www.kingoapp.com/android-root.htm
worked for rooting
https://drive.google.com/file/d/0Bzwq8_00PhMUTm5uYkdrd19QWE0/edit?usp=sharing
worked for twrp
what I'm still unable to determine is how to actually enter recovery without sending adb reboot recovery, the VOL + power seems to still enter the chineese recovery. But other than that it's fine and functions correctly.
If someone knows how to replace the default recovery with twrp and the button combo that enters that recovery with power off please advise.
I have my eye on this as well
https://github.com/TeamYogaBlade/android_device_lenovo_b8000
Getting in to Recovery is easy.
Hopefully adapting the b8000 build to the b6000 won't be that hard once they get it working.
Thanks guys for the info, things are working great so far
Click to expand...
Click to collapse
Hold Power button + (Vol+ & Vo- together) and hold it few few seconds until you see a black screen where you will see selection between recovery and normal boot. Read the screen. Selection of option using volume up button and entering to selection is vol down button. Once you selected Recovery and pressed vol down, you will see screen with triangle. Now press power button gently. There you go.... You are now in Recovery (either 3e or your custom recovery).
Hope it helps.
goldfinv said:
I've got the yoga 8 3G/wifi version. Rooted with farmaroot and installed cwm with mtktools. But I need stock recovery back. Can anyone provide with it cus I don't wanna flash stock os n start all over
Click to expand...
Click to collapse
hi
which version of cwm did you install ?
and where can i find it ?
thanks
Ricx94 said:
tried to install it and completely failed the easy way (running the included batch file). the good news is i have a bit of experience in linux so i opened the batch file for reference of commands needed, transfered the files over adb to the tablet, and then did the rest from there using the commands from the batch file with an android terminal emulator and the hackers keyboard (not required by still awesome). i used ROM manager to reboot to recovery and I AM THERE.
Thanks so much for your help. I am also going to, upon your signature's request, use the thanks button.
Click to expand...
Click to collapse
hi
batch file didn't work for me too, and unfortunately i have no experience in linux.
so would you be kind to explain to me how you did step by step, please ?
thanks
Tuan79 said:
hi
which version of cwm did you install ?
and where can i find it ?
thanks
Click to expand...
Click to collapse
I used mtkdroid tools to install cwm on it
Just picked up at Best Buy for $39 a Digiland DL718M tablet. It has lillipop 5.1 on it. I read the threads on the 10 inch digiland tablet and tried everything there that seemed relevant. This included iroot, v root, and kingo. None worked and Kingo bricked the thing on a second attempt. Luckily I was with in the 15 days at best buy so I just returned it saying it failed in a software update (which it did....) With the "new" new tablet I did not do the OTA update and tried kingo and iroot out of the box. Both failed. Anyone been able to root this puppy yet? I sure am getting no where fast. (did activate USB debug for all attempts). Tried PC and onboard software. Nothing is working.....
Digi-land DL718M
bluesneaky said:
Just picked up at Best Buy for $39 a Digiland DL718M tablet. It has lillipop 5.1 on it. I read the threads on the 10 inch digiland tablet and tried everything there that seemed relevant. This included iroot, v root, and kingo. None worked and Kingo bricked the thing on a second attempt. Luckily I was with in the 15 days at best buy so I just returned it saying it failed in a software update (which it did....) With the "new" new tablet I did not do the OTA update and tried kingo and iroot out of the box. Both failed. Anyone been able to root this puppy yet? I sure am getting no where fast. (did activate USB debug for all attempts). Tried PC and onboard software. Nothing is working.....
Click to expand...
Click to collapse
SRSRoot states that it is compatible but I can't get it to recognize my device even though I can see it in CMD... Any luck on your end?
Hi I picked one of these up too, surprising little $40 device.
I dont want to start another thread but would like to add that I too am looking for a capable root
Thanks.
Also looking for root - anyone flash a custom recovery onto this device?
*found this tweet says it works for this device - trying now*
https://twitter.com/srsroot/status/673606981022797825
Hi fourtwentybuddy,
Did it work for you ??? The site seems to be suspicious so I can't open it. I'm looking for root for this device too.
It did not work...the site downloaded the app just fine however the biggest issue has been getting the device recognized by adb. I've tried 2 different adb drivers and neither of those made the device not have the exclamation point in Device Manager.
*update*
the latest Kingo Root application for windows had the proper adb drivers for this device. However none of the common rooting apps i tried were successful KingRoot Kingo Root SRSRoot. Ill try iRoot RootGenius & MobileGo this week but im doubtful.
fourtwentybuddy said:
It did not work...the site downloaded the app just fine however the biggest issue has been getting the device recognized by adb. I've tried 2 different adb drivers and neither of those made the device not have the exclamation point in Device Manager.
Click to expand...
Click to collapse
Ahhhhh! Sad to hear that. I guess I will wait until some root comes up, then I will get one of these tablets.
I spent the $50 and for that alone it is not that bad of a tablet...as far as feeding my itch to tinker with things - I should have applied that $50 towards a nexus 7
fourtwentybuddy said:
I spent the $50 and for that alone it is not that bad of a tablet...as far as feeding my itch to tinker with things - I should have applied that $50 towards a nexus 7
Click to expand...
Click to collapse
I've already had an Acer B1-810, which i just sent back to repair the bootloop (sshhhh don't tell anyone), yet I still want to buy this one to tinker and test how long it's gonna last. I just think it's better to wait for a root so i can disable background app and boost it a little bit. Small question: Does it have many bloatwares ?
None at all actually
Any news on people being able to root this? I have had no luck so far.
what I've learned so far
from power off, holding down volume down and power button boot into a menu in Chinese.
the top item is a system test
the second item displays test results
the long item is some sort of debug menu
the item below that clears/wipes personal data to factory reset(useful if you forget your lock code)
the bottom item reboots to normal operation
the volume down button navigates the menu, the power button selects choices, and the volume up button acts as a go back button in sub menus.
---------- Post added at 05:55 PM ---------- Previous post was at 05:46 PM ----------
the OEM Android version is nearly stock I did the update and am at 5.1
the developer options is missing the unlock rom option, which is the easiest way to get to root.
these universal adb drivers seem to work
github.com/koush/UniversalAdbDriver
as does this fastboot:
code.google.com/p/android-roms/downloads/detail?name=fastboot-win32.zip&can=2&q=
the fastboot menu is in English, which is nice, but the partitions are write locked, and I haven't figured out how to fix that yet.
and I recommend the ap ' volume in notification ' to solve lolipops refusal to actually change the volume!
So, no one has figured out how to do this root yet? I'm dying to know and I would like it rooted. I've tried every method, even the PC ones. iRoot does not work like I hoped it would :/
getting closer
so it dawned on me i can use adb to reboot into recovery mode, which i did and is in english!
i then tried to sideload, and it told me i had to use adb version 1.0.32 or newer, quick download, and unrar later into the same directory i overwrote my old adb files.
from there i used adb reboot recovery to open the stock android recovery, it provided a dead android robot with his chest open, tapping the power button and volume up at the same time took me into the recovery menu.
i was unable to apply a zip file update superuser.zip either from the adb sideload, or from the sdcard.
it said installation aborted.
got the same response with an .img file with clockwork mod recovery
also same message when trying to use sideload to load superuser apk file
the fastboot that comes with the xda copy of adb 1.0.32 didnt seem to work at all, so went back to previous version of fastboot, mentioned in an earlier post.
tomchism said:
so it dawned on me i can use adb to reboot into recovery mode, which i did and is in english!
i then tried to sideload, and it told me i had to use adb version 1.0.32 or newer, quick download, and unrar later into the same directory i overwrote my old adb files.
from there i used adb reboot recovery to open the stock android recovery, it provided a dead android robot with his chest open, tapping the power button and volume up at the same time took me into the recovery menu.
i was unable to apply a zip file update superuser.zip either from the adb sideload, or from the sdcard.
it said installation aborted.
got the same response with an .img file with clockwork mod recovery
also same message when trying to use sideload to load superuser apk file
the fastboot that comes with the xda copy of adb 1.0.32 didnt seem to work at all, so went back to previous version of fastboot, mentioned in an earlier post.
Click to expand...
Click to collapse
Lol, I installed the ADB files and I bricked my Tablet. This doesn't even matter now xD It just keeps restarting
Anyone find a working root yet I'm looking for one and I don't want to try anything with out being sure
tablet on sale again
this tablet is on sale again at best buy online. $36.99 for 2 colors, a really great buy.
I too own this, have tried towel root and kingroot but (of course) no root. This seems to be a "popular" device and for the price is an excellent choice to tinker with. My main reason for needing this root is so i can use my sd card to provide some extra ram. Eventually I plan to use this tablet as an UI for my home automation setup but i need root first.
If someone can figure out how to root a $800 samsung device, surely this $50 china tablet shouldn't be an issue.
Maybe we should all donate $5.00 to a root developer, so they can buy this device and root it for us and him/her self.
We get root, they get a free device. Its a win win.
Kingroot 4.8.1 rooted this device for me this morning
fourtwentybuddy said:
Kingroot 4.8.1 rooted this device for me this morning
Click to expand...
Click to collapse
Tried Kingroot 4.8.5 and it didn't work.
Hi,
I'm brand new to this forum and my name is Jessy, and it's my pleasure to be here!
I recently bought this AT&T GoPhone (for around $29) at Walmart, and I was following this guide to allow me to use my SD Card as an internal memory storage unit for my phone, but I found out that I need to unlock the Bootloader, install TWRP, SuperSU and Link2SD apps to the SD card and my phone. Since this smart phone is similar to the Idol 3, could I use this method to unlock the Bootloader for my phone or do I have to try a different approach?
I appreciate your time and I look forward to contribute further to these forums! Thanks again!
-Jessy
I picked one up on Black Friday, and decided to root it. I was only able to install an older version of SuperSU though (v2.46). First I had to install the PC version of KingRoot (It's in Chinese I believe, but middle button is always "next" or "yes"), root the phone, and then replace KingRoot with SuperSU. Took me a few tries.
This is the guide I used from the forum:
SuperSU Me_6.4.apk
KingRootSetup v3.2.0.1129.exe
1. install kingrootsetup on pc(must have internet connection to work)
2. connect ur phone with ADB enabled from developers option
3. root ur phone by following on screen instructions...
4. after rooting,install supersume on phone
5.open the app,click on big blue button and wait...
done,replaced kingroot with supersu..
-Mario
Merazomo said:
I picked one up on Black Friday, and decided to root it. I was only able to install an older version of SuperSU though (v2.46). First I had to install the PC version of KingRoot (It's in Chinese I believe, but middle button is always "next" or "yes"), root the phone, and then replace KingRoot with SuperSU. Took me a few tries.
This is the guide I used from the forum:
SuperSU Me_6.4.apk
KingRootSetup v3.2.0.1129.exe
1. install kingrootsetup on pc(must have internet connection to work)
2. connect ur phone with ADB enabled from developers option
3. root ur phone by following on screen instructions...
4. after rooting,install supersume on phone
5.open the app,click on big blue button and wait...
done,replaced kingroot with supersu..
-Mario
Click to expand...
Click to collapse
Hey I used this app to remove king root and my phone bricked do you know how to fix?
ipodhero said:
Hey I used this app to remove king root and my phone bricked do you know how to fix?
Click to expand...
Click to collapse
My Alcatel Ideal 4060A froze a few times during the removal of KingRoot, but all I did was: turn off the phone, remove the battery, and finish the procedure once the phone was on. The phone was only $10 on Black Friday, so you could say it was only an experiment on my part. Unless it's a really good phone, where you can go to the manufacture's website and download the original firmware and install it through your PC, there's not much you can do to unbrick a cheap phone that is practically unknown.
Merazomo said:
Mario
Click to expand...
Click to collapse
Thank you Mario for your help! I'm having a little trouble having my phone being recognized by Kingroot, although I have ADB enabled from the developers option, it seems not to pickup my phone still. I'm still trying though and I'll let you know if I get it to work properly, and perhaps document my mistake so others following this post who happen to have the same problem could know what to do.
- Jessy
*UPDATE*
Just wanted to update that I found out what was my mistake, which is a really simple and basic mistake, I apologize!
What I did was that after I had enabled ADB through my phone, it was already connected to my PC right after I had downloaded Kingroot, so my solution here was simple. I turned off my phone first, then I turned it back on while still connected with Kingroot still running then Kingroot finally read my phone and it rooted it as you outlined. Thanks again for your help, it is too valuable for me!
Here's the guide that I'm following so that I could install more apps to the phone through my 64 GB SD card if you guys were interested, to make the phone more useful, and I also installed my obama phone SIM card on it as well (from lifeline wireless, because hey why not? )
Here's the link to add more internal memory to this phone
www
.howtogeek.
com/114667/how-to-install-android-apps-to-the-sd-card-by-default-move-almost-any-app-to-the-sd-card/
shushi_boi said:
Thank you Mario for your help! I'm having a little trouble having my phone being recognized by Kingroot, although I have ADB enabled from the developers option, it seems not to pickup my phone still. I'm still trying though and I'll let you know if I get it to work properly, and perhaps document my mistake so others following this post who happen to have the same problem could know what to do.
- Jessy
*UPDATE*
Just wanted to update that I found out what was my mistake, which is a really simple and basic mistake, I apologize!
What I did was that after I had enabled ADB through my phone, it was already connected to my PC right after I had downloaded Kingroot, so my solution here was simple. I turned off my phone first, then I turned it back on while still connected with Kingroot still running then Kingroot finally read my phone and it rooted it as you outlined. Thanks again for your help, it is too valuable for me!
Here's the guide that I'm following so that I could install more apps to the phone through my 64 GB SD card if you guys were interested, to make the phone more useful, and I also installed my obama phone SIM card on it as well (from lifeline wireless, because hey why not? )
Here's the link to add more internal memory to this phone
www
.howtogeek.
com/114667/how-to-install-android-apps-to-the-sd-card-by-default-move-almost-any-app-to-the-sd-card/
Click to expand...
Click to collapse
No problem. I'm glad you got the phone rooted. I originally picked up the phone to use as an MP3 player, so I removed most of the unnecessary stock apps with "System app remover (ROOT)", but now that I see how good the phone is (at that price), I plan to use it as a backup phone. It even has a notification LED light for unopened messages LOL; anyway, good luck.
My Alcatel bricked too using this method stuck at boot logo and does nothing... Any fix?
Thanks for writing rooting method for Alcatel 4060a Ideal Pop445. Need some help
Merazomo said:
I picked one up on Black Friday, and decided to root it. I was only able to install an older version of SuperSU though (v2.46). First I had to install the PC version of KingRoot (It's in Chinese I believe, but middle button is always "next" or "yes"), root the phone, and then replace KingRoot with SuperSU. Took me a few tries.
This is the guide I used from the forum:
SuperSU Me_6.4.apk
KingRootSetup v3.2.0.1129.exe
1. install kingrootsetup on pc(must have internet connection to work)
2. connect ur phone with ADB enabled from developers option
3. root ur phone by following on screen instructions...
4. after rooting,install supersume on phone
5.open the app,click on big blue button and wait...
done,replaced kingroot with supersu..
-Mario
Click to expand...
Click to collapse
I've been an iPhone user for many years, I'm almost new to android. I have unlocked the bootloader from the hidden developers options in the settings app. I haven't found any thing useful to root my new Alcatel Ideal 4060a (Pop 445) (at&t unlocked). There are tons of bloatwares and many apps that I can't transfer to sd card. I hope you two can help me out here as I don't want to brick my device.
Question 1: Do jessy did something wrong(regarding your given steps to root) that makes her device rooted OR she has just been lucky? Because someone just posted that he/she has bricked his/her device.
Should I go ahead and try my luck with your method you there would be some advice you would like to give?
Question 2: If I would be able to root this device, would I be able to install Android 6.0 Marshmellow?
Don't root this yet
Source thread:
http://forum.xda-developers.com/android/help/alcatel-ideal-4060a-bootloader-custom-t3476422/
c627627 said:
Same answer ValdamarlSaCOCK was given, goes to you too, feel free to ask any questions:
http://forum.xda-developers.com/devdb/project/dl/?id=21707
Click to expand...
Click to collapse
Rooted already.
faxanidu said:
Don't root this yet
Click to expand...
Click to collapse
I have rooted with Kingroot 5; latest windows version on their website. Now I'm working on replacing it with Supersu or Supersu-me.
I think there always be some solution as far as you are seeing something on your phone's screen.
Just a note from another user with an Alcatel Ideal 4060a... (got for $10 from Best Buy on Black Friday)
Don't try using King-O-Root, then proceed to install Super SU from Google Play. It works that first launch, but on rebooting...
It's permanently bricked. And yes, I tried everything, including adb, recovery (doesn't have an option to flash a rom), from-pc flashing (wouldn't connect/wasn't recognized by adb or the other tools), fastboot (wouldn't launch), etc.
I don't know about the alternate Kingroot app, though. That probably works as some people have said it does for this model.
I was stupid and assumed King-O-Root would work as well, since it seems pretty generic and worked for another phone. I've learned my lesson and will now only follow guides for the specific phone model I have.
Why am I even writing this if it's a different rooting app? Cause I spent 6 hours just to end up killing one of my phones, and this is my best attempt at feeling like there was some worth to the waste. (the chance of preventing someone else the misfortunate, and just ranting)
Anyway, I'm going to bed. (So annoying because I only barely was brash enough to go ahead without a phone-specific guide--was on the fence, but landed on the unfortunate side) Argh! Argh! Argh!
Venryx said:
Just a note from another user with an Alcatel Ideal 4060a... (got for $10 from Best Buy on Black Friday)
Don't try using King-O-Root, then proceed to install Super SU from Google Play. It works that first launch, but on rebooting...
It's permanently bricked. And yes, I tried everything, including adb, recovery (doesn't have an option to flash a rom), from-pc flashing (wouldn't connect/wasn't recognized by adb or the other tools), fastboot (wouldn't launch), etc.
I don't know about the alternate Kingroot app, though. That probably works as some people have said it does for this model.
I was stupid and assumed King-O-Root would work as well, since it seems pretty generic and worked for another phone. I've learned my lesson and will now only follow guides for the specific phone model I have.
Why am I even writing this if it's a different rooting app? Cause I spent 6 hours just to end up killing one of my phones, and this is my best attempt at feeling like there was some worth to the waste. (the chance of preventing someone else the misfortunate, and just ranting)
Anyway, I'm going to bed. (So annoying because I only barely was brash enough to go ahead without a phone-specific guide--was on the fence, but landed on the unfortunate side) Argh! Argh! Argh!
Click to expand...
Click to collapse
Any solution for this? I want to replace King-O-Root with Super SU.
None that I know of.
I have another Android phone that I was also trying to get root on, and that one gets it temporarily using King-O-Root as well, but I'm too paranoid to try to make it permanent on that second one. Losing both my Android phones would be too painful.
If anything, I guess try the KingRoot program, from the pc, and then use the "SuperSU Me" app, as the person on the first page of this thread described. That way worked for at least one person apparently. (though the poster just after said it bricked theirs, so beware)
By the way, is your root from King-O-Root temporary (till restart) or permanent? I installed Super SU during the same launch I used King-O-Root, so I never got to see whether King-O-Root itself would have worked as a permanent (though non-ideal) solution. (I know that on my other Android phone it's temporary)
King-O-Root = Bricked Phone
KingRoot5 = Root Successful + it is possible to replace with SuperSU
http://forum.xda-developers.com/devdb/project/dl/?id=21707
Recovery Retrieved!
I was able to pull the recovery from this phone. Can someone make TWRP for this device using the stock recovery?
Here is the actual recovery image file that I pulled:
(Forgot my old XDA password, had to make another account. Can't post links)
https://drive.google.com/file/d/0B9sabhOnOJ42eXg3Vzlxd1liamc/view?usp=sharing"]https://drive.google.com/file/d/0B9sabhOnOJ42eXg3Vzlxd1liamc/view?usp=sharing
Ch3if-0f-Skull5 said:
I was able to pull the recovery from this phone. Can someone make TWRP for this device using the stock recovery?
Here is the actual recovery image file that I pulled:
(Forgot my old XDA password, had to make another account. Can't post links)
https://drive.google.com/file/d/0B9sabhOnOJ42eXg3Vzlxd1liamc/view?usp=sharing"]https://drive.google.com/file/d/0B9sabhOnOJ42eXg3Vzlxd1liamc/view?usp=sharing
Click to expand...
Click to collapse
Did you manage to unlock the bootloader? If not then you cant flash anything and building twrp would be useless.
arolust said:
Did you manage to unlock the bootloader? If not then you cant flash anything and building twrp would be useless.
Click to expand...
Click to collapse
I pulled the boot file. Could someone maybe look at that? I cannot boot to the bootloader.
I could try to flash_image twrp to the recovery and try that.
I got this phone on black friday, shortly after I got root with kingroot 5 pc and it was all great, however I got greedy and replaced kingoroot with supersu :silly:. First reboot and it goes into boot loop. Now its been sitting in a drawer. I think that purify deleted some app it looks at boot.
It looks like the simplest way to get a restore is 'IF' TCL/Alcatel does an update, someone intercepts the signed zip file, then that zip file could be distributed and used with the stock restore.
Hopeful everyone here can work a better solution... thanks for all your hard work everyone.
yes u r right
many time happen with me, Happen with me on asus KA10, But i got fastboot update img lucky. hope that u will get Fast boot image some day or we may able to get recovery for this device . in that case your your phone may start working
---------- Post added at 01:37 PM ---------- Previous post was at 01:36 PM ----------
the core question "How to unlock Alcatel Ideal 4060A (walmart) Bootloader?" still unanswered. Kindly help.
My phone is rooted, but not able to unlock bootloader so far ...
Hello everyone,
I need help to root this device properly.
First of all, my device dont have fastboot option, i dont know why, so i cant flash anything on it via CMD on pc.
Well, i actualy found a way to root this potato, with an app called Dr Fone Root. It rooted the device with SuperSU, but i want magisk. So i installed MagiskManager, and uninstalled SuperSU inside the app settings.
Okay, i have magiskmanager, i can install latest version direct mode, it installs, all fine so far. Now the safetynet is red, and the main problem is this one, i can't find a way to fix it. I tried alot of methods so far, and it always fail the safetynet (basic and cts).
Okay, i have the stock firmware on my SDcard, if i press volume up+volume down+power the phone will install firmware again. I did this, and pressed volume down + power and it goes for recovery mode, but before it goes there, it tells me the name of my device and says there that my phone is rooted. I install the magisk manager, and there is no instal direct option now, but the safetynet basic integrity now is true, only cts is false, that means that are no root stuff in phone right? Okay, but if i use the progam to root it, it will turn red again. So i cant flash magisk with cmd because fastboot dont work, if i use Dr Fone Root safetynet gets red... Does anyone can help me to fix this please?
Sorry for messy english...
Hi,
I'm actually looking into rooting the phone too.
I haven't had any luck with the Dr Fone tool. Which version did you use?
I've tried with:
- Kingroot: No success
- Kingoroot: No success
- Dr Fone: I get not option to root when I connect my phone... (only backup and other tools)
Edit:
If anyone every gets to this post I did figure out how to do it.
MEO StarAddict 6 root or firmware
Hello, if anyone could help me with this, I've tried to find firmware for this phone I've read in another thread it's from ZTE but no luck in their website, I want to root or update the firmware if anyone could help, currently the phone is...
forum.xda-developers.com