Trying to flash latest Bean Stalk 4.4.4. Keep getting radio needs to be updated error. I assume this is a kernel issue. Any help would be appreciated.
there was a discussion in the CM11 thread about using a newer modem, you could download it from
UCMD3 (JB AT&T update): https://shared.com/6sfvvgdzfe?s=l
install modem in recovery, install beanstalk and then reflash the modem you want/need to use if compatible.
Troy
Sent from my SAMSUNG-SGH-I717 using XDA Free mobile app
GPFerror said:
there was a discussion in the CM11 thread about using a newer modem, you could download it from
UCMD3 (JB AT&T update): https://shared.com/6sfvvgdzfe?s=l
install modem in recovery, install beanstalk and then reflash the modem you want/need to use if compatible.
Troy
Sent from my SAMSUNG-SGH-I717 using XDA Free mobile app
Click to expand...
Click to collapse
You can also just delete the check for the modem version in the updater script inside the zip file. I just flashed CM11 and had the same issue but deleted the line and it flashed just fine.
Related
I want to install a new modem, but I'm going to be running an older kernel than the modem. Will this combo work fine?
I run the opposite. I match my modem to the carriers firmware, and flash back modem after the ROM and kernel. No problems with speed or connectivity. You can only try....
Sent from my GT-I9100 using xda premium
Any modem can run with any rom.
Sent from my GT-I9100 using xda premium
Yes but sometimes Modem must be compatible with the Android build...
try
so you can try and if the new modem isnt work on older rom then reflash old modem too
Yep, pretty simple really. Extract modem from Intratech firmware thread and flash with Odin, our search for some of the CWM flashable modems. Try and test......
Sent from my GT-I9100 using xda premium
jaytana said:
Yes but sometimes Modem must be compatible with the Android build...
Click to expand...
Click to collapse
Is there any way to tell before flashing?
Hi,
I currently have a Telus Galaxy Note i717. I have my phone rooted and was using Objection ICs Rom before the official ICS release became available on July 13th. I have been trying to install the stock Telus ICS update ota and I keep getting a message saying the update is not available even though I know it is. I have looked all over the internet for a solution and nothing seems to be allowing me to update my phone with the official telus update. I have unrooted my phone, reset flash counter, whiped partition, cache, etc using CWM, and I am still unable to download and install the Telus ICS update. Any help you can give me would be great as I would really like to install the Telus ICS rom.
I'm having the same issue but I think it's because I still have cwm. Once you flash the stock telus recovery you should be good to go. I'm flashing that once I get home.
Sent from my SGH-I897 using xda app-developers app
bones2116 said:
I'm having the same issue but I think it's because I still have cwm. Once you flash the stock telus recovery you should be good to go. I'm flashing that once I get home.
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Here's a link to stock telus recovery. http://forum.xda-developers.com/showthread.php?p=24528886 to Odin. For flash counter shouldn't matter for the upgrade.
Sent from my SGH-I897 using xda app-developers app
bones2116 said:
Here's a link to stock telus recovery. http://forum.xda-developers.com/showthread.php?p=24528886 to Odin. For flash counter shouldn't matter for the upgrade.
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
I will try installing this. I saw on the Samsung website the baseband version had to be I717UCLF1. But I believe by installing the OBjection rom the baseband version was changed to I717UCLF6 and in order to get the Telus ICS ofiical update the baseband version has to be I717UCLF1 in order for the update to download. IS this correct? and will downloaded the previoussly mentioned file fix this issue?
SprucePayne13 said:
I will try installing this. I saw on the Samsung website the baseband version had to be I717UCLF1. But I believe by installing the OBjection rom the baseband version was changed to I717UCLF6 and in order to get the Telus ICS ofiical update the baseband version has to be I717UCLF1 in order for the update to download. IS this correct? and will downloaded the previoussly mentioned file fix this issue?
Click to expand...
Click to collapse
Once I use odin to flash this rom, do I need to do anything else in order to update the galaxy note i717 official telus OTA ics rom?
Do I install this: http://www.mediafire.com/?4229vkvbrkz9y8d,kc6xrajpg3klpm2,3kwo3lpmn9q7jvt
Than: http://thinkleet.de/cwm/stock_telus_recovery.zip
And: http://forum.xda-developers.com/showthread.php?t=1506330 (The Telus kernel download)
Please help, I am really getting overwhelmed and confused by all this..
SprucePayne13 said:
Once I use odin to flash this rom, do I need to do anything else in order to update the galaxy note i717 official telus OTA ics rom?
Do I install this: http://www.mediafire.com/?4229vkvbrkz9y8d,kc6xrajpg3klpm2,3kwo3lpmn9q7jvt
Than: http://thinkleet.de/cwm/stock_telus_recovery.zip
And: http://forum.xda-developers.com/showthread.php?t=1506330 (The Telus kernel download)
Please help, I am really getting overwhelmed and confused by all this..
Click to expand...
Click to collapse
Before you do all that flashing? Did you do a nandroid of stock? If you did that you can restore your nandroid backup and flash the stock recovery.
Sent from my SGH-I717D using xda app-developers app
bones2116 said:
Before you do all that flashing? Did you do a nandroid of stock? If you did that you can restore your nandroid backup and flash the stock recovery.
Sent from my SGH-I717D using xda app-developers app
Click to expand...
Click to collapse
It ended up being a radio band version issue. I found a link for telus-radio.zip on another xda thread. I installed it using cwm andit fixed the issue. My phone was recognized by kies and it updated my phone to ics 4.0.4.
SprucePayne13 said:
It ended up being a radio band version issue. I found a link for telus-radio.zip on another xda thread. I installed it using cwm andit fixed the issue. My phone was recognized by kies and it updated my phone to ics 4.0.4.
Click to expand...
Click to collapse
That's awesome to hear. Glad you where able to update
I have this problem: with stock CM 10.1 installation files, sometimes people are not able to call me and I am not able to call others. I only can fix this by restarting my I9100 or turning on and off airplane mode.
I asked about this issue in this forum, and one man recommended to install custom modem. So I would like to ask, what kind of modem should I install in order to fix this problem?
Thanks.
You can try the app Getril, from the play store. However I'm not quite sure what is meant by a custom modem. There is a thread here that has modems matched to RILs but as yet non have been made for 4.2.1. I looked there this morning. All I can suggest is try a fully clean installation or roll back to your previous rom.
All the best
Sent from my GT-I9100 using xda premium
HANDSY said:
You can try the app Getril, from the play store. However I'm not quite sure what is meant by a custom modem. There is a thread here that has modems matched to RILs but as yet non have been made for 4.2.1. I looked there this morning. All I can suggest is try a fully clean installation or roll back to your previous rom.
All the best
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
By modem I mean that file which you choose when you install custom rom through download mode in odin's "modem" section.
I see, all the modems I've ever flashed were in zip format done via CMW. Sorry I can't be of further assistance.
Sent from my GT-I9100 using xda premium
Mariius said:
By modem I mean that file which you choose when you install custom rom through download mode in odin's "modem" section.
Click to expand...
Click to collapse
Yup. On xda, you'll find that majority prefer the use of CWM recovery over odin since it doesn't increase the binary counter and is much easier. Simply download any modem for your device (which will be in a .zip format) and flash from recovery.
Remember that modems are not rom or android version specific. A gingerbread modem can be used with a jellybean rom.
Sent from my GT-I9100 using Tapatalk 2
By custom modem i thought he was referring to the modified modem/ril zip files that are better than those supplied by the Getril app. In that thread it states not use GB or ICS files with JB roms. Thread attached for your reference http://forum.xda-developers.com/showthread.php?p=31416701
Sent from my GT-I9100 using xda premium
HANDSY said:
By custom modem i thought he was referring to the modified modem/ril zip files that are better than those supplied by the Getril app. In that thread it states not use GB or ICS files with JB roms. Thread attached for your reference http://forum.xda-developers.com/showthread.php?p=31416701
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Before the release of the leak (XXLSJ), many were on cm10 (4.1.2) with older modems/rils, usually those of ICS. It does work, but maybe its not so optimised to work on JB? I dunno, I'm not that much of a technical expert...
Sent from my GT-I9100 using Tapatalk 2
My current baseband is the i605vrall4 and im running beans 19....does this need to be updated to the newest vramc3 or is it fine running vrall4?? If I need to update could someone give me instructions on how to do this? Thanks
Sent from my SCH-I605 using xda premium
The latest is VRAMC3...but the changes were minor and if you have no issues on VRALL3 you don't necessarily need to update it. If you want to anyway you just need to flash the new modem in recovery. Search for Vramc3 and you will get the link to download it. You could also wait and flash it whenever build 20 comes out and you flash that...two birds, one stone.
Sent from my SCH-I605 using Tapatalk 2
Ok so im currently running beans 19....so in order to flash vramc3 do I just go into twrp and click install and find the vramc3 file or how do I do it?!?
Sent from my SCH-I605 using xda premium
okoboji1 said:
Ok so im currently running beans 19....so in order to flash vramc3 do I just go into twrp and click install and find the vramc3 file or how do I do it?!?
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Yep, that's it. Flash in recovery just like you did with the ROM. But if you aren't having any issues you could also wait for your next ROM flash. Just flash the ROM first, and then the modem. Either way...just don't expect anything major to change with VRAMC3, I sure didn't notice anything.
Whats the newest baseband out?
All my Note 2s are using old Roms ive had radio issues using lollipop. Just wanted to make sure my baseband is current.
Reason being is everytime I goto Canada now from the US I gotta switch to GSM instead of CDMA to get service. It used to be okay leaving it on CDMA.
Also I get nothing using the Global selection in the US or Canada…
Currently using i605VRALLJB
I'm currently using ultima rom v16. When using mobile data I used to (on 4.1.2) get H+ signal. Now on 4.3 I only have H.
I've tried different kernels and also tried changing the modem to the same one I used on 4.1.2 (MG4) to no avail.
I'm just wondering if it's a 4.3 issue or rom issue. Also if anybody has any ideas of other steps I can take to get this sorted.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Wipe and flash full stock rom with odin, use the stock rom for your country including latest modem.
Test before you restore/install any apps or mods.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Wipe and flash full stock rom with odin, use the stock rom for your country including latest modem.
Test before you restore/install any apps or mods.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I'm using ULTIMAs ROM. It's that ROM issue. Every other 4.3 I have tried worked normally with H+.